@article{DienstOtt1972,
  author    = {Dienst, Karl-Jakob and Ott, Udo},
  title     = {Spezielle nichtkommutative pappussche affine zweiseitige Inzidenzgruppen},
  series = {Archiv der Mathematik},
  volume    = {23},
  journal   = {Archiv der Mathematik},
  number    = {1},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {0003-889X},
  doi       = {10.1007/BF01304890},
  pages     = {329 -- 336},
  year      = {1972},
  language  = {de}
}
@inproceedings{MuellerVeggianNeskakisLiederetal.1978,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M. and Beuscher, H.},
  title     = {Study of rotational aligned bands in ¹⁹⁰,¹⁹²,¹⁹⁴ Au},
  series = {Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)},
  booktitle = {Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-09102-8},
  pages     = {428},
  year      = {1978},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Aerodynamic multi point design challenge},
  series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_4},
  pages     = {53 -- 67},
  year      = {1997},
  abstract  = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Required aerodynamic technologies},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_5},
  pages     = {69 -- 96},
  year      = {1997},
  abstract  = {In the preceeding chapters on "Son of Concorde, a Technology Challenge" and "Aerodynamic Multipoint Design Challenge" it was explained, that a well balanced contribution of new technologies in all major disciplines is required for realisation of a new Supersonic Commercial Transport (SCT). One of these technologies - usually one of the most important for aircraft-is aerodynamics. Here, the required "pure" aerodynamic technologies are specified in more detail, according to our present knowledge. Increasing insight into the problems may change the balance of importance of the individual technologies and may require some more contributions. We must never confine our knowledge to the knowledge base of an expert at a given time, but must stay open for new insights.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Certification of supersonic civil transports},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_6},
  pages     = {97 -- 103},
  year      = {1997},
  abstract  = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Supersonic laminar flow},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_18},
  pages     = {275 -- 290},
  year      = {1997},
  abstract  = {Supersonic transports are very drag sensitive. Technology to reduce drag by application of laminar flow, therefore, will be important; it is a prerequisite to achieve very long range capability. In earlier studies it was assumed that SCTs would only become possible by application of laminar flow [376]. But today, we request an SCT to be viable without application of laminar flow in order to maintain its competitiveness when laminar flow becomes available for subsonic and supersonic transports. By reducing fuel burned, laminar flow drag reduction reduces size and weight of the aircraft, or increases range capability -whereas otherwise size and weight would grow towards infinity. Transition mechanisms from laminar to turbulent state of the boundary layer flow (ALT, CFI, TSI) function as for transonic transports, but at more severe conditions: higher sweep angles, cooled surfaces; higher mode instabilities (HMI) must at least be taken into account, although they may not become important below Mach 3. Hitherto there is a worldwide lack of ground test facilities to investigate TSI at the expected cruise Mach numbers between 1.6 and 2.4; in Stuttgart, Germany one such facility -a Ludwieg tube- is still in the validation phase. A quiet Ludwieg tunnel could be a favourable choice for Europe. But it will require a new approach in designing aircraft which includes improved theoretical predictions, usage of classical wind tunnels for turbulent flow and flight tests for validation.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Son of Concorde, a technology challenge},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_3},
  pages     = {31 -- 51},
  year      = {1997},
  abstract  = {Concorde (Figure 9) is the only supersonic airliner which has been introduced into regular passenger service. It is still in service at British Airways and Air France without any flight accidents, and probably will stay in service for at least for ten more years.},
  language  = {en}
}
@article{Dikta2006,
  author    = {Dikta, Gerhard},
  title     = {Time series methods to forecast patent filings},
  series = {Forecasting innovations : methods for predicting numbers of patent filings ; with 71 tables / Peter Hingley ; Marc Nicolas (ed.),},
  journal   = {Forecasting innovations : methods for predicting numbers of patent filings ; with 71 tables / Peter Hingley ; Marc Nicolas (ed.),},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-35991-3},
  doi       = {10.1007/3-540-35992-3_6},
  pages     = {95 -- 124},
  year      = {2006},
  language  = {en}
}
@article{PawelkeButzer1968,
  author    = {Pawelke, Siegfried and Butzer, Paul L.},
  title     = {Semi-groups and resolvent operators},
  series = {Archive for Rational Mechanics and Analysis},
  volume    = {30},
  journal   = {Archive for Rational Mechanics and Analysis},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0003-9527},
  doi       = {10.1007/BF00250941},
  pages     = {127 -- 147},
  year      = {1968},
  language  = {en}
}
@incollection{MuellerVeggianKopsQuinetal.2007,
  author    = {M{\"u}ller-Veggian, Mattea and Kops, Elena Rota and Quin, Peng and Herzog, Hans},
  title     = {MRI Based Attenuation Correction for Brain PET Images},
  series = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  booktitle = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68763-4},
  doi       = {10.1007/978-3-540-68764-1_15},
  pages     = {93 -- 97},
  year      = {2007},
  abstract  = {This work describes a procedure to yield attenuation maps from MR images which are used for the absorption correction (AC) of brain PET data. Such an approach could be mandatory for future combined PET and MRI scanners, which probably do not include a transmission facility. T1-weighted MR images were segmented into brain tissue, bone, soft tissue, and sinus; attenuation coefficients corresponding to elemental composition and density as well as to 511 keV photon energy were respectively assigned. Attenuation maps containing up to four compartments were created and forward projected into sinograms with attenuation factors which then were used for AC during reconstruction of FDG-PET data. The commonly used AC based on a radioactive (68Ge) transmission scan served as reference. The reconstructed radioactivity values obtained with the MRI-based AC were about 20\% lower than those obtained with PET-based AC if the skull was not taken into account. Considering the skull the difference was still about 10\%. Our investigations demonstrate the feasibility of a MRI-based AC, but revealed also the necessity of a satisfying delineation of bone thickness which tends to be underestimated in our first approach of T1-weighted MR image segmentation.},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Density Operator},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {166 -- 169},
  year      = {2009},
  language  = {en}
}
@article{DoorschodtSchreinemachersBehbahanietal.2011,
  author    = {Doorschodt, B. M. and Schreinemachers, M. C. J. M. and Behbahani, Mehdi and Florquin, S. and Weis, J. and Staat, Manfred and Tolba, R. H.},
  title     = {Hypothermic machine perfusion of kidney grafts: which pressure is preferred},
  series = {Annals of Biomedical Engineering. 39 (2011), H. 3},
  journal   = {Annals of Biomedical Engineering. 39 (2011), H. 3},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1573-9686},
  pages     = {1051 -- 1059},
  year      = {2011},
  language  = {en}
}
@article{SchubertScholl2011,
  author    = {Schubert, Nicole and Scholl, Ingrid},
  title     = {Comparing GPU-based multi-volume ray casting techniques},
  series = {Computer Science - Research and Development},
  volume    = {26},
  journal   = {Computer Science - Research and Development},
  number    = {12},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1865-2042},
  pages     = {39 -- 50},
  year      = {2011},
  language  = {en}
}
@article{SchollAachDesernoetal.2011,
  author    = {Scholl, Ingrid and Aach, Til and Deserno, Thomas M. and Kuhlen, Torsten},
  title     = {Challenges of medical image processing},
  series = {Computer Science - Research and Development},
  volume    = {26},
  journal   = {Computer Science - Research and Development},
  number    = {1-2},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1865-2042},
  pages     = {5 -- 13},
  year      = {2011},
  language  = {en}
}
@article{DesernoAachAmuntsetal.2011,
  author    = {Deserno, Thomas M. and Aach, Til and Amunts, Katrin and Hillen, Walter and Kuhlen, Torsten and Scholl, Ingrid},
  title     = {Advances in medical image processing : A special Issue on the Workshop in Aachen, Germany, March 2010},
  series = {Computer Science - Research and Development. 26 (2011), H. 1-2},
  journal   = {Computer Science - Research and Development. 26 (2011), H. 1-2},
  publisher = {springer},
  address   = {Berlin},
  isbn      = {1865-2042},
  pages     = {1 -- 3},
  year      = {2011},
  language  = {en}
}
@article{PaczkowskiWeissbeckerSchoeningetal.2011,
  author    = {Paczkowski, Sebastian and Weißbecker, Bernhard and Sch{\"o}ning, Michael Josef and Sch{\"u}tz, Stefan},
  title     = {Biosensors on the Basis of Insect Olfaction},
  series = {Insect biotechnology / Andreas Vilcinskas, ed.},
  journal   = {Insect biotechnology / Andreas Vilcinskas, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-90-481-9640-1},
  pages     = {225 -- 240},
  year      = {2011},
  language  = {en}
}
@article{KurulganDemirciDemirciTrzewiketal.2011,
  author    = {Kurulgan Demirci, Eylem and Demirci, T. and Trzewik, J{\"u}rgen and Linder, Peter and Karakulah, G. and Artmann, Gerhard and Sakizli, M. and Temiz Artmann, Ayseg{\"u}l},
  title     = {Genome-Wide Gene Expression Analysis of NIH 3T3 Cell Line Under Mechanical Stimulation},
  series = {Cellular and molecular bioengineering. 4 (2011), H. 1},
  journal   = {Cellular and molecular bioengineering. 4 (2011), H. 1},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1865-5025},
  pages     = {46 -- 55},
  year      = {2011},
  language  = {en}
}
@article{BehnamBeckerWeber2011,
  author    = {Behnam, S. and Becker, A. and Weber, Hans-Joachim},
  title     = {Clinical benefit and cost-efficiency of minimized perfusion circuits for extracorporeal circulation during cardiac surgery},
  series = {Zeitschrift f{\"u}r Herz-, Thorax- und Gef{\"a}ßchirurgie},
  volume    = {25},
  journal   = {Zeitschrift f{\"u}r Herz-, Thorax- und Gef{\"a}ßchirurgie},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0930-9225},
  pages     = {305 -- 306},
  year      = {2011},
  language  = {en}
}
@article{BerretzSkorupaSanderetal.2011,
  author    = {Berretz, Frank and Skorupa, Sasche and Sander, Volker and Belloum, Adam and Bubak, Marian},
  title     = {Actor-Driven Workflow Execution in Distributed Environments},
  series = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  journal   = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-21877-4},
  pages     = {287 -- 294},
  year      = {2011},
  language  = {en}
}
@article{SchaeferHoefkenSchuba2011,
  author    = {Schaefer, Thomas and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Windows Phone 7 from a Digital Forensics' Perspective},
  publisher = {Springer},
  address   = {Berlin},
  year      = {2011},
  language  = {en}
}
@article{FerreinBeckLakemeyer2009,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Landmark-Based Representations for Navigating Holonomic Soccer Robots / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  journal   = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-642-02921-9},
  pages     = {25 -- 36},
  year      = {2009},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2011,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Reasoning with Qualitative Positional Information for Domestic Domains in the Situation Calculus},
  series = {Journal of Intelligent \& Robotic Systems},
  volume    = {63},
  journal   = {Journal of Intelligent \& Robotic Systems},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {0921-0296},
  pages     = {273 -- 300},
  year      = {2011},
  language  = {en}
}
@article{PichlerGeorgeSeileretal.2009,
  author    = {Pichler, A. and George, A. and Seiler, F. and Srulijes, J. and Havermann, Marc},
  title     = {Doppler Picture Velocimetry (DPV) applied to hypersonics},
  series = {Shock Waves [Elektronische Ressource] : 26th International Symposium on Shock Waves, Volume 1 / edited by Klaus Hannemann, Friedrich Seiler},
  journal   = {Shock Waves [Elektronische Ressource] : 26th International Symposium on Shock Waves, Volume 1 / edited by Klaus Hannemann, Friedrich Seiler},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-85168-4},
  pages     = {503 -- 508},
  year      = {2009},
  language  = {en}
}
@incollection{LuczakWolfMuehlfelder2001,
  author    = {Luczak, Holger and Wolf, Martin and M{\"u}hlfelder, M.},
  title     = {Arbeitswissenschaft},
  series = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen},
  booktitle = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen},
  editor    = {Schwabe, Gerhard},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-67552-5},
  doi       = {10.1007/978-3-642-56848-0_2},
  pages     = {7 -- 14},
  year      = {2001},
  abstract  = {Unter Arbeit wird das T{\"a}tigsein des Menschen verstanden, bei dem dieser mit anderen Menschen und (technischen) Hilfsmitteln in Interaktion tritt, um unter wirtschaftlichen Zielsetzungen G{\"u}ter und Dienstleistungen zu erstellen (Luczak, 1998a). Arbeit dient direkt oder indirekt der Erhaltung der eigenen Existenz und der Existenz der Gesellschaft. Arbeit ist deshalb eine besondere Form des T{\"a}tigseins neben anderen wie Spiel, Sport, Lemen usw.},
  language  = {de}
}
@incollection{LuczakWolfSchlicketal.1999,
  author    = {Luczak, Holger and Wolf, Martin and Schlick, Christopher and Springer, J. and Foltz, Christian},
  title     = {Personenorientierte Arbeitsprozesse und Kommunikationsforrnen},
  series = {Integration von Entwicklungssystemen in Ingenieuranwendungen : substantielle Verbesserung der Entwicklungsprozesse},
  booktitle = {Integration von Entwicklungssystemen in Ingenieuranwendungen : substantielle Verbesserung der Entwicklungsprozesse},
  editor    = {Nagl, Walter},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63920-9},
  pages     = {403 -- 422},
  year      = {1999},
  language  = {de}
}
@incollection{HelsperDressler2012,
  author    = {Helsper, Christoph and Dressler, J{\"o}rg},
  title     = {Partikelmesstechnik},
  series = {Reinraumtechnik},
  volume    = {2012},
  booktitle = {Reinraumtechnik},
  editor    = {Gail, Lothar and Gommel, Udo and Hortig, Hans-Peter},
  edition   = {3},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-19435-1},
  doi       = {10.1007/978-3-642-19435-1_3},
  pages     = {69 -- 95},
  year      = {2012},
  abstract  = {Der Schutz von Produkten vor der Kontamination durch Partikel gilt als eine zentrale Aufgabe der Reinraumtechnik. Da es dabei um Kontaminationseffekte weit unterhalb der visuellen Wahrnehmbarkeit geht, braucht es leistungsf{\"a}hige Verfahren, um die Messgr{\"o}ße „Partikelkontamination" {\"u}ber den gesamten Bereich, den Anwender fordern, pr{\"a}zise zu bestimmen. Neben der Partikelh{\"a}ufigkeit ist dabei die Gr{\"o}ße der Partikel, die sowohl das Transportverhalten wie auch die m{\"o}gliche Wirkung auf das Produkt beeinflusst, von entscheidender Bedeutung. Ferner kann es f{\"u}r die Ermittlung von Kontaminationsquellen von Interesse sein, die Form und die chemische Natur der Partikel zu bestimmen (z. B. textile Fasern, Metallabrieb, fl{\"u}ssige Tr{\"o}pfchen). Die Partikelh{\"a}ufigkeit wird {\"u}blicherweise als Konzentration, d. h. bezogen auf das analysierte Gasvolumen angegeben. Bei den in reinen Technologien {\"u}blichen niedrigen Konzentrationen dient als H{\"a}ufigkeitsmaß die Partikelanzahlkonzentration, also die Partikelanzahl pro Volumeneinheit des Tr{\"a}germediums.},
  language  = {de}
}
@article{Digel2011,
  author    = {Digel, Ilya},
  title     = {Primary thermosensory events in cells},
  series = {Transient receptor potential channels / Md. Shahidul Islam, ed.},
  journal   = {Transient receptor potential channels / Md. Shahidul Islam, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-94-007-0264-6},
  pages     = {451 -- 468},
  year      = {2011},
  language  = {en}
}
@article{DigelTemizArtmann2011,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l},
  title     = {The emperor's new body : seeking for a blueprint of limb regeneration in humans},
  series = {Stem cell engineering : principles and applications / Gerhard M. Artmann ... eds.},
  journal   = {Stem cell engineering : principles and applications / Gerhard M. Artmann ... eds.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-11864-7},
  pages     = {3 -- 37},
  year      = {2011},
  language  = {en}
}
@article{DashevskyLanzlKotliar2011,
  author    = {Dashevsky, Alexey V. and Lanzl, Ines M. and Kotliar, Konstantin},
  title     = {Non-penetrating intracanalicular partial trabeculectomy via the ostia of Schlemm's canal},
  series = {Graefe's Archive for Clinical and Experimental Ophthalmology},
  volume    = {249},
  journal   = {Graefe's Archive for Clinical and Experimental Ophthalmology},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0721-832x},
  pages     = {565 -- 573},
  year      = {2011},
  language  = {en}
}
@article{SeidovaKotliarFoergeretal.2009,
  author    = {Seidova, Seid-Fatima and Kotliar, Konstantin and Foerger, Frauke and Klopfer, Matthias and Lanzl, Ines},
  title     = {Functional retinal changes in Gaucher disease},
  series = {Documenta Ophthalmologica},
  volume    = {118},
  journal   = {Documenta Ophthalmologica},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1573-2622},
  pages     = {151 -- 154},
  year      = {2009},
  language  = {en}
}
@article{PieperKlein2011,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {A simple and accurate numerical network flow model for bionic micro heat exchangers},
  series = {Heat mass transfer},
  volume    = {47},
  journal   = {Heat mass transfer},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {0947-7411},
  pages     = {491 -- 503},
  year      = {2011},
  language  = {en}
}
@article{PieperKlein2012,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {Application of simple, periodic homogenization techniques to non-linear heat conduction problems in non-periodic, porous media},
  series = {Heat mass transfer},
  volume    = {48},
  journal   = {Heat mass transfer},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0947-7411},
  doi       = {10.1007/s00231-011-0879-4},
  pages     = {291 -- 300},
  year      = {2012},
  abstract  = {Often, detailed simulations of heat conduction in complicated, porous media have large runtimes. Then homogenization is a powerful tool to speed up the calculations by preserving accurate solutions at the same time. Unfortunately real structures are generally non-periodic, which requires unpractical, complicated homogenization techniques. We demonstrate in this paper, that the application of simple, periodic techniques to realistic media, that are just close to periodic, gives accurate, approximative solutions. In order to obtain effective parameters for the homogenized heat equation, we have to solve a so called "cell problem". In contrast to periodic structures it is not trivial to determine a suitable unit cell, which represents a non-periodic media. To overcome this problem, we give a rule of thumb on how to choose a good cell. Finally we demonstrate the efficiency of our method for virtually generated foams as well as real foams and compare these results to periodic structures.},
  language  = {en}
}
@article{PhamStaat2013,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {71 -- 87},
  year      = {2013},
  language  = {en}
}
@article{TranStaat2013,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {89 -- 102},
  year      = {2013},
  language  = {en}
}
@incollection{Mandelartz2009,
  author    = {Mandelartz, Johannes},
  title     = {VDI-Richtlinien - mit Technischen Regeln Wirtschaftlichkeit erh{\"o}hen und Standards setzen},
  series = {Betriebliche Instandhaltung},
  booktitle = {Betriebliche Instandhaltung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-00502-2},
  doi       = {10.1007/978-3-642-00502-2_26},
  pages     = {311 -- 317},
  year      = {2009},
  abstract  = {Der Verein Deutscher Ingenieure e.V. (VDI) ist ein gemeinn{\"u}tziger, wirtschaftlich und politisch unabh{\"a}ngiger, technisch-wissenschaftlicher Verein von Ingenieuren und Naturwissenschaftlern. Mit {\"u}ber 137 000 pers{\"o}nlich zugeordneten Mitgliedern ist er eine der gr{\"o}ßten Ingenieur-Vereinigungen Europas und gilt in Deutschland als f{\"u}hrender Sprecher der Technik und der Ingenieure. 1856 gegr{\"u}ndet, hat er viele f{\"u}r die Technik wesentliche Entwicklungen in Gang gesetzt, so im Bereich der technischen {\"U}berwachung, der technischen Regelsetzung und Normung, der Arbeitsstudien, im gewerblichen Rechtsschutz und im Patentwesen. Seit seiner Gr{\"u}ndung sieht es der VDI als seine Aufgabe, "das Zusammenwirken aller geistiger Kr{\"a}fte der Technik im Bewusstsein ethischer Verantwortung zu f{\"o}rdern" und die Lebensm{\"o}glichkeiten aller Menschen durch Entwicklung und sinnvoller Anwendung technischer Mittel zu verbessern.},
  language  = {de}
}
@article{NomdedeuWillenSchiefferetal.2012,
  author    = {Nomdedeu, Mar Monsonis and Willen, Christine and Schieffer, Andre and Arndt, Hartmut},
  title     = {Temperature-dependent ranges of coexistence in a model of a two-prey-one-predator microbial food web},
  series = {Marine Biology},
  volume    = {159},
  journal   = {Marine Biology},
  number    = {11},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1793},
  doi       = {10.1007/s00227-012-1966-x},
  pages     = {2423 -- 2430},
  year      = {2012},
  abstract  = {The objective of our study was to analyze the effects of temperature on the population dynamics of a three-species food web consisting of two prey bacteria (Pedobacter sp. and Acinetobacter johnsonii) and a protozoan predator (Tetrahymena pyriformis) as model organisms. We assessed the effects of temperature on the growth rates of all three species with the objective of developing a model with four differential equations based on the experimental data. The following hypotheses were tested at a theoretical level: Firstly, temperature changes can affect the dynamic behavior of a system by temperature-dependent parameters and interactions and secondly, food web response to temperature cannot be derived from the single species temperature response. The main outcome of the study is that temperature changes affect the parameter range where coexistence is possible within all three species. This has significant consequences on our ideas regarding the evaluation of effects of global warming.},
  language  = {en}
}
@incollection{RoethKampkerReisgenetal.2013,
  author    = {R{\"o}th, Thilo and Kampker, Achim and Reisgen, Uwe and Hameyer, Kay and De Doncker, R. W.},
  title     = {Entwicklung von elektrofahrzeugspezifischen Systemen},
  series = {Elektromobilit{\"a}t : Grundlagen einer Zukunftstechnologie},
  booktitle = {Elektromobilit{\"a}t : Grundlagen einer Zukunftstechnologie},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-31986-0},
  pages     = {235 -- 336},
  year      = {2013},
  abstract  = {Die Fahrzeugkarosserie bildet als gr{\"o}ßte funktionale und organisatorische Systemeinheit ein zentrales Kompetenzfeld der OEMs. F{\"u}r den Fahrzeughersteller stellt der Karosserierohbau eine hohe Kernkompetenz sowohl in der Produktentwicklung als auch in der Produktion dar. Neue, innovative Karosseriebauweisen, bspw. aufgrund eines neuen Fahrzeugkonzeptes oder neuer Anforderungen, bedeuten f{\"u}r den OEM auch gleichzeitig die intensive Auseinandersetzung mit Kompetenzfokussierung bzw. Wertsch{\"o}pfungsverlagerungen.},
  language  = {de}
}
@incollection{ReimerBraunWellmeretal.2010,
  author    = {Reimer, Lars and Braun, Carsten and Wellmer, Georg and Behr, Marek and Ballmann, Josef},
  title     = {Development of a modular method for computational aero-structural analysis of aircraft},
  series = {Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schr{\"o}der. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109},
  booktitle = {Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schr{\"o}der. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-04087-0},
  pages     = {205 -- 238},
  year      = {2010},
  language  = {en}
}
@incollection{ReimerWellmerBraunetal.2009,
  author    = {Reimer, Lars and Wellmer, Georg and Braun, Carsten and Ballmann, Josef},
  title     = {Computational methods for aero-structural analysis and optimisation of aircrafts based on reduced-order structural models},
  series = {MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107},
  booktitle = {MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-04092-4},
  pages     = {135 -- 150},
  year      = {2009},
  abstract  = {In this part of the MEGADESIGN project, aeroelastic effects are introduced into the aerodynamic analysis of aircrafts by coupling DLR's flow solvers TAU and FLOWer to a Timoshenko-beam solver. The emerging aeroelastic solvers and a method for the automatic identification of Timoshenko-beam models for wing-box structures were integrated into a simulation environment enabling the combined optimisation of aerodynamic wing shape and structure.},
  language  = {en}
}
@incollection{ReimerBraunBallmann2007,
  author    = {Reimer, Lars and Braun, Carsten and Ballmann, Josef},
  title     = {Computational study of the aeroelastic equilibrium configuration of a swept wind tunnel wing model in subsonic flow},
  series = {High performance computing in science and engineering '06. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2006 / Wolfgang E. Nagel ... Eds.},
  booktitle = {High performance computing in science and engineering '06. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2006 / Wolfgang E. Nagel ... Eds.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-36165-7},
  pages     = {421 -- 434},
  year      = {2007},
  abstract  = {In the Collaborative Research Center SFB 401 at RWTH Aachen University, the numerical aeroelastic method SOFIA for direct numerical aeroelastic simulation is being progressively developed. Numerical results obtained by applying SOFIA were compared with measured data of static and dynamic aeroelastic wind tunnel tests for an elastic swept wing in subsonic flow.},
  language  = {en}
}
@incollection{BraunBouckeBallmann2005,
  author    = {Braun, Carsten and Boucke, Alexander and Ballmann, Josef},
  title     = {Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model},
  series = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  booktitle = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-22943-4},
  pages     = {225 -- 236},
  year      = {2005},
  language  = {en}
}
@incollection{BraunBouckeHankeetal.2003,
  author    = {Braun, Carsten and Boucke, Alexander and Hanke, M. and Karavas, Alexandros and Ballmann, Josef},
  title     = {Prediction of the model deformation of a high speed transport aircraft type wing by direct aeroelastic simulation},
  series = {High performance computing in science and engineering '03. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2003 / Eds.: Egon Krause ...},
  booktitle = {High performance computing in science and engineering '03. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2003 / Eds.: Egon Krause ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-40850-5},
  pages     = {331 -- 342},
  year      = {2003},
  language  = {de}
}
@incollection{BrittenBraunHesseetal.2003,
  author    = {Britten, G. and Braun, Carsten and Hesse, M. and Ballmann, Josef},
  title     = {Computational aeroelasticity with reduced structural models},
  series = {Flow modulation and fluid-structure interaction at airplane wings : research results of the Collaborative Research Center SFB 401 at RWTH Aachen, University of Technology, Aachen, Germany / Josef Ballmann (Ed.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 84},
  booktitle = {Flow modulation and fluid-structure interaction at airplane wings : research results of the Collaborative Research Center SFB 401 at RWTH Aachen, University of Technology, Aachen, Germany / Josef Ballmann (Ed.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 84},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-40209-8},
  pages     = {275 -- 299},
  year      = {2003},
  language  = {en}
}
@incollection{CresserHaegerLeuchsetal.1982,
  author    = {Cresser, J. D. and H{\"a}ger, J. and Leuchs, G. and Rateike, Franz-Matthias and Walther, H.},
  title     = {Resonance fluorescence of atoms in strong monochromatic laser fields},
  series = {Dissipative systems in quantum optics. Ed. by Rodolfo Bonifacio. Topics in current physics. Vol. 27},
  booktitle = {Dissipative systems in quantum optics. Ed. by Rodolfo Bonifacio. Topics in current physics. Vol. 27},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-81719-9},
  doi       = {10.1007/978-3-642-81717-5_3},
  pages     = {21 -- 59},
  year      = {1982},
  abstract  = {The investigation of atomic resonance fluorescence has always been of special interest as a means for the determination of atomic parameters. In addition, information on the interaction mechanism between atoms and radiation can be obtained. In the standard fluorescence experiment the frequency distribution of the incident photons is larger than the natural width of the respective transition; as a consequence the correlation time in the photon-atom interaction is determined by the lifetime of the atoms in the excited state. With the development of lasers and especially of tunable dye lasers in recent years it became possible to study the case where the incident radiation has a spectral distribution which is narrower than the natural width. This corresponds to a correlation time of the incoming light wave which is much longer than the excited-state lifetime. In this chapter a survey of experiments on the resonance fluorescence of atoms in monochromatic laser fields will be given.},
  language  = {en}
}
@incollection{Weber1998,
  author    = {Weber, Hans-Joachim},
  title     = {Applied physics of compressible and incompressible fluids},
  series = {Critical care nephrology / [Hrsg.:] Claudio Ronco and Rinaldo Bellomo},
  booktitle = {Critical care nephrology / [Hrsg.:] Claudio Ronco and Rinaldo Bellomo},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-010-6306-7},
  pages     = {63 -- 84},
  year      = {1998},
  language  = {en}
}
@incollection{Dikta1998,
  author    = {Dikta, Gerhard},
  title     = {Fundamentals of applied probability and basic statistics},
  series = {Critical care nephrology / [Hrsg.:] Claudio Ronco and Rinaldo Bellomo},
  booktitle = {Critical care nephrology / [Hrsg.:] Claudio Ronco and Rinaldo Bellomo},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-010-6306-7},
  pages     = {51 -- 61},
  year      = {1998},
  language  = {en}
}
@incollection{DachwaldUlamecBiele2013,
  author    = {Dachwald, Bernd and Ulamec, Stephan and Biele, Jens},
  title     = {Clean in situ subsurface exploration of icy environments in the solar system},
  series = {Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)},
  booktitle = {Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-6545-0 (Druckausgabe)},
  pages     = {367 -- 397},
  year      = {2013},
  abstract  = {"To assess the habitability of the icy environments in the solar system, for example, on Mars, Europa, and Enceladus, the scientific analysis of material embedded in or underneath their ice layers is very important. We consider self-steering robotic ice melting probes to be the best method to cleanly access these environments, that is, in compliance with planetary protection standards. The required technologies are currently developed and tested."},
  language  = {en}
}
@incollection{MelissSpaete1997,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Berechnung von Sonnenstand und -strahlung},
  series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63218-2},
  doi       = {10.1007/978-3-642-60864-3_2},
  pages     = {5 -- 22},
  year      = {1997},
  language  = {de}
}
@incollection{MelissSpaete1997,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Auslegung von solarthermischen Anlagen},
  series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63218-2},
  doi       = {10.1007/978-3-642-60864-3_3},
  pages     = {23 -- 47},
  year      = {1997},
  language  = {de}
}
@article{DietzelWeberPorschenetal.1976,
  author    = {Dietzel, F. and Weber, Hans-Joachim and Porschen, W. and Feinendegen, L. E.},
  title     = {Zur W{\"a}rmeempfindlichkeit von oxischen und hypoxischen Zellen in einem Tumor},
  series = {Naturwissenschaften},
  volume    = {63},
  journal   = {Naturwissenschaften},
  number    = {12},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0028-1042},
  doi       = {10.1007/BF00622808},
  pages     = {585 -- 586},
  year      = {1976},
  language  = {de}
}
@incollection{DiltheyBrandenburgSchleser2005,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Mikrokleben},
  series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-23706-8},
  pages     = {161 -- 172},
  year      = {2005},
  language  = {de}
}
@incollection{HirtBleckBobzinetal.2011,
  author    = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and Schleser, Markus and [u.a.],},
  title     = {Hybride Produktionssysteme},
  series = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  booktitle = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-20692-4 (Print) ; 978-3-642-20693-1 (E-Book)},
  doi       = {10.1007/978-3-642-20693-1_5},
  pages     = {465 -- 745},
  year      = {2011},
  abstract  = {W{\"a}hrend die virtuelle Produktentstehungskette große Gestaltungsfreir{\"a}ume bietet, ist die reale Produktentstehungskette durch wesentlich mehr Randbedingungen gekennzeichnet, die nicht oder nur ansatzweise beeinflussbar sind. Die Realisierung des aus logistischer Sicht optimalen One-Piece-Flow bei gleichzeitiger Steigerung von Flexibilit{\"a}t und Produktivit{\"a}t sowie des Verschiebens der Grenze des technologisch Machbaren m{\"u}ssen in zuk{\"u}nftigen Forschungsans{\"a}tzen gleichermaßen betrachtet werden. Die Grenzverschiebung auf Basis der Integration von Technologien ist dabei ein viel versprechender Ansatz, der es in vielen F{\"a}llen erm{\"o}glicht, in allen genannten Zielrichtungen gleichermaßen Potentiale zu erschließen.},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation},
  series = {Frontiers of materials science},
  volume    = {Vol. 5},
  journal   = {Frontiers of materials science},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2095-0268 (E-Journal); 2095-025X (Print)},
  pages     = {79 -- 89},
  year      = {2011},
  language  = {en}
}
@incollection{TranStaat2014,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method},
  series = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  booktitle = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)},
  doi       = {10.1007/978-94-007-6827-7_5},
  pages     = {101 -- 117},
  year      = {2014},
  abstract  = {This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.},
  language  = {en}
}
@article{WincklerKruegerSchnitzleretal.2014,
  author    = {Winckler, Silvia and Krueger, Rolf and Schnitzler, Thomas and Zang, Werner and Fischer, Rainer and Biselli, Manfred},
  title     = {A sensitive monitoring system for mammalian cell cultivation processes: a PAT approach},
  series = {Bioprocess and biosystems engineering},
  volume    = {37},
  journal   = {Bioprocess and biosystems engineering},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1615-7591 (Print) 1615-7605 (Online)},
  doi       = {10.1007/s00449-013-1062-8},
  pages     = {901 -- 912},
  year      = {2014},
  abstract  = {Biopharmaceuticals such as antibodies are produced in cultivated mammalian cells, which must be monitored to comply with good manufacturing practice. We, therefore, developed a fully automated system comprising a specific exhaust gas analyzer, inline analytics and a corresponding algorithm to precisely determine the oxygen uptake rate, carbon dioxide evolution rate, carbon dioxide transfer rate, transfer quotient and respiratory quotient without interrupting the ongoing cultivation, in order to assess its reproducibility. The system was verified using chemical simulation experiments and was able to measure the respiratory activity of hybridoma cells and DG44 cells (derived from Chinese hamster ovary cells) with satisfactory results at a minimum viable cell density of ~2.0 × 10⁵ cells ml⁻¹. The system was suitable for both batch and fed-batch cultivations in bubble-aerated and membrane-aerated reactors, with and without the control of pH and dissolved oxygen.},
  language  = {en}
}
@article{DeppeBongaertsO'Connelletal.2011,
  author    = {Deppe, Veronika Maria and Bongaerts, Johannes and O'Connell, Timothy and Maurer, Karl-Heinz and Meinhardt, Friedhelm},
  title     = {Enzymatic deglycation of Amadori products in bacteria},
  series = {Applied microbiology and biotechnology},
  volume    = {Vol. 90},
  journal   = {Applied microbiology and biotechnology},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614 (E-Journal); 0171-1741 (Print); 0175-7598 (Print); 0340-2118 (Print)},
  pages     = {399 -- 406},
  year      = {2011},
  language  = {en}
}
@article{KirschnerHermannsKlementzHaselhuhnetal.2011,
  author    = {Kirschner-Hermanns, Ruth and Klementz, T. and Haselhuhn, Angelika and Jakse, Gerhard and Heidenreich, A. and Brehmer, Bernhard},
  title     = {Drangsymptomatik nach onkologisch erfolgreicher Prostatakarzinomtherapie : prospektive Studie zum Einfluss von Therapiemodalit{\"a}t, Morbidit{\"a}t und epidemiologischen Faktoren auf die Lebensqualit{\"a}t},
  series = {Der Urologe},
  volume    = {Vol. 50},
  journal   = {Der Urologe},
  number    = {Iss. 11},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1433-0563},
  pages     = {1412 -- 1419},
  year      = {2011},
  language  = {de}
}
@article{Bung2011,
  author    = {Bung, Daniel B.},
  title     = {Fließcharakteristik und Sauerstoffeintrag bei selbstbel{\"u}fteten Gerinnestr{\"o}mungen auf Kaskaden mit gem{\"a}ßigter Neigung},
  series = {{\"O}sterreichische Wasser- und Abfallwirtschaft},
  volume    = {Vol. 63},
  journal   = {{\"O}sterreichische Wasser- und Abfallwirtschaft},
  number    = {Iss. 3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-7566 (E-Journal); 0945-358X (Print)},
  pages     = {76 -- 81},
  year      = {2011},
  language  = {de}
}
@incollection{WolffSeefeldtBaueretal.2014,
  author    = {Wolff, Nino and Seefeldt, Patric and Bauer, Wolfgang and Fiebig, Christopher and Gerding, Patrick and Parow-Souchon, Kai and Pongs, Anna and Reiffenrath, Matti and Ziemann, Thomas},
  title     = {Alternative application of solar sail technology},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  doi       = {10.1007/978-3-642-34907-2_23},
  pages     = {351 -- 365},
  year      = {2014},
  abstract  = {The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.},
  language  = {en}
}
@incollection{DachwaldBoehnhardtBrojetal.2014,
  author    = {Dachwald, Bernd and Boehnhardt, Herrmann and Broj, Ulrich and Geppert, Ulrich R. M. E. and Grundmann, Jan-Thimo and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Johnson, Les and K{\"u}hrt, Ekkehard and Mottola, Stefano and Macdonald, Malcolm and McInnes, Colin R. and Vasile, Massimiliano and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  pages     = {211 -- 226},
  year      = {2014},
  abstract  = {A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.},
  language  = {en}
}
@incollection{McInnesBothmerDachwaldetal.2014,
  author    = {McInnes, Colin R. and Bothmer, Volker and Dachwald, Bernd and Geppert, Ulrich R. M. E. and Heiligers, Jeannette and Hilgers, Alan and Johnson, Les and Macdonald, Malcolm and Reinhard, Ruedeger and Seboldt, Wolfgang and Spietz, Peter},
  title     = {Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  pages     = {227 -- 242},
  year      = {2014},
  abstract  = {A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.},
  language  = {en}
}
@incollection{MacdonaldMcGrathAppourchauxetal.2014,
  author    = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, W. and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a solar polar mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  editor    = {Macdonald, Malcolm},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-642-34906-5},
  doi       = {10.1007/978-3-642-34907-2_17},
  pages     = {243 -- 257},
  year      = {2014},
  abstract  = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.},
  language  = {en}
}
@incollection{PuliniGligorevic2009,
  author    = {Pulini, Paola and Gligorevic, Snjezana},
  title     = {WIMAX performance in the airport environment},
  series = {Multi-carrier systems \& solutions 2009. (Lecture notes in electrical engineering ; 41)},
  booktitle = {Multi-carrier systems \& solutions 2009. (Lecture notes in electrical engineering ; 41)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-90-481-2529-6 (Print) ; 978-90-481-2530-2 (Online)},
  pages     = {301 -- 310},
  year      = {2009},
  abstract  = {In this paper, the multicarrier physical layers of WiMAX are evaluated in the context of airport data links. The orthogonal frequency-division multiplexing (OFDM) and orthogonal frequency-division multiple-access (OFDMA) cases are applied to the forward link (FL) and reverse link (RL), respectively. The performance of the so called parking and taxi scenarios is presented for airport communications in C-band. Numerical results show that the proposed scheme brings good performance for both the FL and the RL. For the OFDMA case a structure changing called double-tile is also proposed to improve the system performance.},
  language  = {en}
}
@incollection{PriedeFerrein2013,
  author    = {Priede, Gareth and Ferrein, Alexander},
  title     = {Towards passive walking for the fully-actuated biped robot Nao},
  series = {Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)},
  booktitle = {Emerging trends in computing, informatics, systems sciences, and engineering. (Lecture notes in electrical engineering : vol. 151)},
  publisher = {Springer},
  address   = {New York, NY},
  isbn      = {978-1-4614-3557-0 ; 978-1-4614-3558-7},
  doi       = {10.1007/978-1-4614-3558-7_18},
  pages     = {225 -- 236},
  year      = {2013},
  abstract  = {Many biped robots deploy a form of gait that follows the zero moment point (ZMP) approach, that is, the robot is in a stable position at any point in time. This requires the robot to be fully actuated. While very stable, the draw-backs of this approach are a fairly slow gait and high energy consumption. An alternative approach is the so-called passive-dynamic walking, where the gait makes use of the inertia and dynamic stability of the robot. In this paper we describe our ongoing work of combining the principles of passive-dynamic walking on the fully-actuated biped robot Nao, which is also deployed for robotic soccer applications. We present a simple controller that allows the robot to stably rock sidewards, showing a closed limit-cycle. We discuss first results of superimposing a forward motion on the sidewards motion. Based on this we expect to endow the Nao with a fast, robust, and stable passive-dynamic walk on the fully-actuated Nao in the future.},
  language  = {en}
}
@article{AlebouyehSamamiPieperBreitbachetal.2014,
  author    = {Alebouyeh Samami, Behzad and Pieper, Martin and Breitbach, Gerd and Hodapp, Josef},
  title     = {Heat production in the windings of the stators of electric machines under stationary condition},
  series = {Heat and mass transfer},
  volume    = {50},
  journal   = {Heat and mass transfer},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0947-7411 (Print) ; 1432-1181 (E-Journal)},
  doi       = {10.1007/s00231-014-1371-8},
  pages     = {1707 -- 1716},
  year      = {2014},
  abstract  = {In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.},
  language  = {en}
}
@incollection{NiemuellerEwertReuteretal.2014,
  author    = {Niem{\"u}ller, Tim and Ewert, Daniel and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {RoboCup logistics league sponsored by festo: A competitive factory automation testbed},
  series = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  booktitle = {RoboCup 2013: Robot World Cup XVII : Eindhoven; Netherlands; 1 July 2013 through 1 July 2013. (Lecture notes in computer science ; 8371)},
  publisher = {Springer},
  address   = {Berlin},
  organization    = {RoboCup International Symposium <17, 2013, Eindhoven>},
  isbn      = {978-3-662-44467-2 (Print) 978-3-662-44468-9 (Online)},
  pages     = {336 -- 347},
  year      = {2014},
  abstract  = {A new trend in automation is to deploy so-called cyber-physical systems (CPS) which combine computation with physical processes. The novel RoboCup Logistics League Sponsored by Festo (LLSF) aims at such CPS logistic scenarios in an automation setting. A team of robots has to produce products from a number of semi-finished products which they have to machine during the game. Different production plans are possible and the robots need to recycle scrap byproducts. This way, the LLSF is a very interesting league offering a number of challenging research questions for planning, coordination, or communication in an application-driven scenario. In this paper, we outline the objectives of the LLSF and present steps for developing the league further towards a benchmark for logistics scenarios for CPS. As a major milestone we present the new automated referee system which helps in governing the game play as well as keeping track of the scored points in a very complex factory scenario.},
  language  = {en}
}
@article{KhaydukovaZadorozhnayaKirsanovetal.2014,
  author    = {Khaydukova, M. M. and Zadorozhnaya, O. A. and Kirsanov, D. O. and Iken, Heiko and Rolka, David and Sch{\"o}ning, Michael Josef and Babain, V. A. and Vlasov, Yu. G. and Legin, A. V.},
  title     = {Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes},
  series = {Russian journal of applied chemistry},
  volume    = {87},
  journal   = {Russian journal of applied chemistry},
  number    = {3},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1608-3296 (E-Journal); 1070-4272 (Print)},
  doi       = {10.1134/S1070427214030112},
  pages     = {307 -- 314},
  year      = {2014},
  abstract  = {The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.},
  language  = {en}
}
@article{JakobMartinezMandaweetal.2013,
  author    = {Jakob, Felix and Martinez, Ronny and Mandawe, John and Hellmuth, Hendrik and Siegert, Petra and Maurer, Karl-Heinz and Schwaneberg, Ulrich},
  title     = {Surface charge engineering of a Bacillus gibsonii subtilisin protease},
  series = {Applied microbiology and biotechnology},
  volume    = {Vol. 97},
  journal   = {Applied microbiology and biotechnology},
  number    = {Iss. 15},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614 (E-Journal); 0171-1741 (Print); 0175-7598 (Print); 0340-2118 (Print)},
  pages     = {6793 -- 6802},
  year      = {2013},
  language  = {en}
}
@article{NiehausGaborWielandetal.2011,
  author    = {Niehaus, F. and Gabor, E. and Wieland, S. and Siegert, Petra and Maurer, Karl-Heinz and Eck, J.},
  title     = {Enzymes for the laundry industries: tapping the vast metagenomic pool of alkaline proteases},
  series = {Microbial biotechnology},
  volume    = {Vol. 4},
  journal   = {Microbial biotechnology},
  number    = {Iss. 6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614 (E-Journal); 0171-1741 (Print); 0175-7598 (Print); 0340-2118 (Print)},
  pages     = {767 -- 776},
  year      = {2011},
  language  = {en}
}
@incollection{Pietsch2013,
  author    = {Pietsch, Wolfram},
  title     = {A framework for strategic positioning of IT-products},
  series = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  booktitle = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-39336-5_11},
  pages     = {102 -- 116},
  year      = {2013},
  abstract  = {IT Products are viewed and managed differently depending on the perspectives and the stage within the life cycle. A model is presented that integrates different perspectives and stages serving as an aid for the analysis of business models and focused positioning of IT-products. Four generic business models are analysed with regard to the product management function in general and the positioning field for IT-products specifically: off-the-shelf (license), license plus service, project, and system service (incl. cloud computing).},
  language  = {en}
}
@incollection{KirchnerReisertSchoening2014,
  author    = {Kirchner, Patrick and Reisert, Steffen and Sch{\"o}ning, Michael Josef},
  title     = {Calorimetric gas sensors for hydrogen peroxide monitoring in aseptic food processes},
  series = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)},
  booktitle = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-642-54518-4 (Print) ; 978-3-642-54519-1 (Online)},
  doi       = {10.1007/5346_2013_51},
  pages     = {279 -- 309},
  year      = {2014},
  abstract  = {For the sterilisation of aseptic food packages it is taken advantage of the microbicidal properties of hydrogen peroxide (H2O2). Especially, when applied in vapour phase, it has shown high potential of microbial inactivation. In addition, it offers a high environmental compatibility compared to other chemical sterilisation agents, as it decomposes into oxygen and water, respectively. Due to a lack in sensory detection possibilities, a continuous monitoring of the H2O2 concentration was recently not available. Instead, the sterilisation efficacy is validated using microbiological tests. However, progresses in the development of calorimetric gas sensors during the last 7 years have made it possible to monitor the H2O2 concentration during operation. This chapter deals with the fundamentals of calorimetric gas sensing with special focus on the detection of gaseous hydrogen peroxide. A sensor principle based on a calorimetric differential set-up is described. Special emphasis is given to the sensor design with respect to the operational requirements under field conditions. The state-of-the-art regarding a sensor set-up for the on-line monitoring and secondly, a miniaturised sensor for in-line monitoring are summarised. Furthermore, alternative detection methods and a novel multi-sensor system for the characterisation of aseptic sterilisation processes are described.},
  language  = {en}
}
@incollection{KnottSofroniaGerressenetal.2014,
  author    = {Knott, Thomas C. and Sofronia, Raluca E. and Gerressen, Marcus and Law, Yuen and Davidescu, Arjana and Savii, George G. and Gatzweiler, Karl-Heinz and Staat, Manfred and Kuhlen, Torsten W.},
  title     = {Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy},
  series = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  booktitle = {Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12057-7 (Online)},
  doi       = {10.1007/978-3-319-12057-7_1},
  pages     = {1 -- 10},
  year      = {2014},
  abstract  = {Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.},
  language  = {en}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}
@article{FontiEilmannGarciaGonzalezetal.2009,
  author    = {Fonti, Patrick and Eilmann, Britta and Garc{\´i}a-Gonz{\´a}lez, Ignacio and von Arx, Georg},
  title     = {Expeditious building of ring-porous earlywood vessel chronologies without loosing signal information},
  series = {Trees : structure and function},
  volume    = {23},
  journal   = {Trees : structure and function},
  number    = {3},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0931-1890 (Print)},
  doi       = {10.1007/s00468-008-0310-z},
  pages     = {665 -- 671},
  year      = {2009},
  language  = {en}
}
@incollection{AlhwarinFerreinScholl2014,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {IR stereo kinect: improving depth images by combining structured light with IR stereo},
  series = {PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)},
  booktitle = {PRICAI 2014: Trends in artificial intelligence : 13th Pacific Rim International Conference on Artificial Intelligence : Gold Coast, QLD, Australia, December 1-5, 2014 : proceedings. (Lecture notes in computer science ; vol. 8862)},
  publisher = {Springer},
  address   = {M{\"u}nchen},
  isbn      = {978-3-319-13559-5 (Print) ; 978-3-319-13560-1 (E-Book)},
  doi       = {10.1007/978-3-319-13560-1_33},
  pages     = {409 -- 421},
  year      = {2014},
  abstract  = {RGB-D sensors such as the Microsoft Kinect or the Asus Xtion are inexpensive 3D sensors. A depth image is computed by calculating the distortion of a known infrared light (IR) pattern which is projected into the scene. While these sensors are great devices they have some limitations. The distance they can measure is limited and they suffer from reflection problems on transparent, shiny, or very matte and absorbing objects. If more than one RGB-D camera is used the IR patterns interfere with each other. This results in a massive loss of depth information. In this paper, we present a simple and powerful method to overcome these problems. We propose a stereo RGB-D camera system which uses the pros of RGB-D cameras and combine them with the pros of stereo camera systems. The idea is to utilize the IR images of each two sensors as a stereo pair to generate a depth map. The IR patterns emitted by IR projectors are exploited here to enhance the dense stereo matching even if the observed objects or surfaces are texture-less or transparent. The resulting disparity map is then fused with the depth map offered by the RGB-D sensor to fill the regions and the holes that appear because of interference, or due to transparent or reflective objects. Our results show that the density of depth information is increased especially for transparent, shiny or matte objects.},
  language  = {en}
}
@incollection{TranStaat2015,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Uncertainty multimode failure and shakedown analysis of shells},
  series = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  booktitle = {Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)},
  doi       = {10.1007/978-3-319-12928-0_14},
  pages     = {279 -- 298},
  year      = {2015},
  abstract  = {This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.},
  language  = {en}
}
@incollection{Wollert2006,
  author    = {Wollert, J{\"o}rg},
  title     = {Bussysteme},
  series = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.},
  booktitle = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-21207-8 ; 978-3-540-21207-2},
  pages     = {475 -- 653},
  year      = {2006},
  language  = {de}
}
@article{HafnerDemetzWeickertetal.2014,
  author    = {Hafner, David and Demetz, Oliver and Weickert, Joachim and Reißel, Martin},
  title     = {Mathematical Foundations and Generalisations of the Census Transform for Robust Optic Flow Computation},
  series = {Journal of Mathematical Imaging and Vision},
  journal   = {Journal of Mathematical Imaging and Vision},
  publisher = {Springer},
  address   = {New York},
  issn      = {1573-7683 (Online)},
  doi       = {10.1007/s10851-014-0529-9},
  year      = {2014},
  language  = {en}
}
@incollection{PietschSiedentopfTeubner1992,
  author    = {Pietsch, Wolfram and Siedentopf, Jukka and Teubner, Alexander},
  title     = {Vergleich konnektionistischer Modelle und konventioneller Optimierungsverfahren am Beispiel der Maschinenbelegungsplanung},
  series = {Operations Research Proceedings 1991 / Papers of the 20th Annual Meeting = Vortr{\"a}ge der 20. Jahrestagung},
  booktitle = {Operations Research Proceedings 1991 / Papers of the 20th Annual Meeting = Vortr{\"a}ge der 20. Jahrestagung},
  editor    = {Gaul, Wolfgang and Bachem, Achim and Habenicht, Walter and Runge, Walter and Stahl, Wolfgang W.},
  publisher = {Springer},
  address   = {Berlin ; Heidelberg},
  isbn      = {978-3-642-46773-8 (Online)},
  doi       = {https://doi.org/10.1007/978-3-642-46773-8_58},
  pages     = {223},
  year      = {1992},
  abstract  = {F{\"u}r die Erstellung von Maschinenbelegungsplanen wurden im Operations Research aufwendige Optimierungsverfahren konzipiert und entsprechende Programme entwickelt. Maschinenbelegungsprobleme sind klassische Vertreter der Klasse der np-vollst{\"a}ndigen Probleme, also sichere Kandidaten f{\"u}r kombinatorische Explosion der L{\"o}sungsalternativen. Deshalb ist der Einsatz konventioneller Planungssysteme wegen der hohen Rechneranforderungen der g{\"a}ngigen Verfahren an die Hardware oft nicht praktikabel.},
  language  = {de}
}
@article{BorchertHasenbeckJungbluthetal.2009,
  author    = {Borchert, J{\"o}rg and Hasenbeck, Marc and Jungbluth, Christian and Schemm, Ralf},
  title     = {Bewertung und Steuerung von Gasspeichern bzw. Gasspeicherscheiben},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {33},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1866-2765},
  doi       = {10.1007/s12398-009-0033-x},
  pages     = {279 -- 293},
  year      = {2009},
  abstract  = {In diesem Artikel werden zun{\"a}chst einleitend der Gasmarkt Deutschland und der sich daraus ergebende Speicherbedarf skizziert. Folgend wird auf verschiedene Speichernutzen aus betriebswirtschaftlicher Perspektive eingegangen und die in diesem Artikel vorgestellten Bewertungsverfahren einleitend beschrieben. In diesem Artikel werden stochastische Optimierungsmethoden aufgegriffen, die sowohl eine Bewertung der Speicher gegen{\"u}ber einem Spotpreis, als auch gegen{\"u}ber einer gesamten Forwardcurve erm{\"o}glichen. Hierzu werden zun{\"a}chst Modelle zur Beschreibung der Marktpreise vorgestellt und anhand empirischer Daten kalibriert. Dann wird eine beispielhafte Speicherscheibe zun{\"a}chst auf Basis der LeastSquareMonteCarloTechnik gegen{\"u}ber dem stochastischen mehrfaktoriellen Spotpreismodell bewertet. Hieran schließt sich die Vorstellung der Bewertung sowie des Hedgings gegen{\"u}ber der Forwardcurve an. Abschließend erfolgt eine vergleichende Gegen{\"u}berstellung beider Verfahren.},
  language  = {de}
}
@incollection{RebelHueningScholletal.2015,
  author    = {Rebel, S{\"o}ren and H{\"u}ning, Felix and Scholl, Ingrid and Ferrein, Alexander},
  title     = {MQOne: Low-cost design for a rugged-terrain robot platform},
  series = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  booktitle = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)},
  doi       = {10.1007/978-3-319-22876-1_19},
  pages     = {209 -- 221},
  year      = {2015},
  abstract  = {Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.},
  language  = {en}
}
@incollection{RahierRitzWallenborn2015,
  author    = {Rahier, Michael and Ritz, Thomas and Wallenborn, Ramona},
  title     = {Information and communication technology for integrated mobility concepts such as E-carsharing},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_17},
  pages     = {311 -- 326},
  year      = {2015},
  abstract  = {During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users' new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.},
  language  = {en}
}
@incollection{BusseEschMuntaniol2015,
  author    = {Busse, Daniel and Esch, Thomas and Muntaniol, Roman},
  title     = {Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_18},
  pages     = {327 -- 343},
  year      = {2015},
  abstract  = {The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.},
  language  = {en}
}
@incollection{KuemmellHillgaertner2015,
  author    = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael},
  title     = {Inductive charging comfortable and nonvisible charging stations for urbanised areas},
  series = {E-Mobility in Europe : trends and good practice},
  booktitle = {E-Mobility in Europe : trends and good practice},
  publisher = {Springer},
  address   = {Cham [u.a.]},
  isbn      = {978-3-319-13193-1},
  doi       = {10.1007/978-3-319-13194-8_16},
  pages     = {297 -- 309},
  year      = {2015},
  abstract  = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.},
  language  = {en}
}
@incollection{KallweitGottschalkWalenta2016,
  author    = {Kallweit, Stephan and Gottschalk, Michael and Walenta, Robert},
  title     = {ROS based safety concept for collaborative robots in industrial applications},
  series = {Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371)},
  booktitle = {Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371)},
  publisher = {Springer},
  address   = {Cham},
  organization    = {International Conference on Robotics in Alpe-Adria-Danube Region <24, 2015, Bucharest>},
  isbn      = {978-3-319-21289-0 (Print) ; 978-3-319-21290-6 (E-Book)},
  doi       = {10.1007/978-3-319-21290-6_3},
  pages     = {27 -- 35},
  year      = {2016},
  abstract  = {The production and assembly of customized products increases the demand for flexible automation systems. One approach is to remove the safety fences that separate human and industrial robot to combine their skills. This collaboration possesses a certain risk for the human co-worker, leading to numerous safety concepts to protect him. The human needs to be monitored and tracked by a safety system using different sensors. The proposed system consists of a RGBD camera for surveillance of the common working area, an array of optical distance sensors to compensate shadowing effects of the RGBD camera and a laser range finder to detect the co-worker when approaching the work cell. The software for collision detection, path planning, robot control and predicting the behaviour of the co-worker is based on the Robot Operating System (ROS). A first prototype of the work cell shows that with advanced algorithms from the field of mobile robotics a very flexible safety concept can be realized: the robot not simply stops its movement when detecting a collision, but plans and executes an alternative path around the obstacle.},
  language  = {en}
}
@incollection{Bung2015,
  author    = {Bung, Daniel B.},
  title     = {Laboratory models of free-surface flows},
  series = {Rivers - physical, fluvial and environmental processes},
  booktitle = {Rivers - physical, fluvial and environmental processes},
  editor    = {Rowinski, Pawel},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-17718-2 ; 978-3-319-17719-9},
  doi       = {10.1007/978-3-319-17719-9_9},
  pages     = {213 -- 228},
  year      = {2015},
  abstract  = {Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.},
  language  = {en}
}
@incollection{SrivastavaKnolleHoyleretal.2015,
  author    = {Srivastava, Alok and Knolle, Friedhart and Hoyler, Friedrich and Scherer, Ulrich W. and Schnug, Ewald},
  title     = {Uranium Toxicity in the State of Punjab in North-Western India},
  series = {Management of Natural Resources in a Changing Environment},
  booktitle = {Management of Natural Resources in a Changing Environment},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-12559-6},
  doi       = {10.1007/978-3-319-12559-6_21},
  pages     = {271 -- 275},
  year      = {2015},
  abstract  = {Lately there has been an increasing concern about uranium toxicity in some districts of Punjab State located in the North Western part of India after the publication of a report (Blaurock-Busch et al. 2010) which showed that the concentration of uranium in hair and urine of children suffering from physical deformities, neurological and mental disorder from Malwa region (Fig. 1) of Punjab State was manifold higher than the reference ranges. A train which connects the affected region with the nearby city of Bikaner which has a Cancer Hospital has been nicknamed as Cancer Express due to the frenzy generated on account of uranium related toxicity.},
  language  = {en}
}
@article{DuongNguyenStaat2015,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred},
  title     = {Physical response of hyperelastic models for composite materials and soft tissues},
  series = {Asia pacific journal on computational engineering},
  volume    = {2},
  journal   = {Asia pacific journal on computational engineering},
  number    = {3 (December 2015)},
  issn      = {2196-1166},
  doi       = {10.1186/s40540-015-0015-x},
  pages     = {1 -- 18},
  year      = {2015},
  language  = {en}
}
@article{KuertenMottaghyZiegler2015,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances},
  series = {Acta Geotechnica},
  volume    = {10},
  journal   = {Acta Geotechnica},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1133},
  doi       = {10.1007/s11440-014-0311-6},
  pages     = {219 -- 229},
  year      = {2015},
  language  = {en}
}
@incollection{NiemuellerReuterEwertetal.2015,
  author    = {Niemueller, Tim and Reuter, Sebastian and Ewert, Daniel and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Decisive Factors for the Success of the Carologistics RoboCup Team in the RoboCup Logistics League 2014},
  series = {RoboCup 2014: Robot World Cup XVIII},
  booktitle = {RoboCup 2014: Robot World Cup XVIII},
  publisher = {Springer},
  isbn      = {978-3-319-18615-3},
  pages     = {155 -- 167},
  year      = {2015},
  language  = {en}
}
@incollection{GoeckelSchifferWagneretal.2015,
  author    = {Goeckel, Tom and Schiffer, Stefan and Wagner, Hermann and Lakemeyer, Gerhard},
  title     = {The Video Conference Tool Robot ViCToR},
  series = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II},
  booktitle = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II},
  publisher = {Springer},
  isbn      = {978-3-319-22876-1},
  doi       = {10.1007/978-3-319-22876-1_6},
  pages     = {61 -- 73},
  year      = {2015},
  abstract  = {We present a robotic tool that autonomously follows a conversation to enable remote presence in video conferencing. When humans participate in a meeting with the help of video conferencing tools, it is crucial that they are able to follow the conversation both with acoustic and visual input. To this end, we design and implement a video conferencing tool robot that uses binaural sound source localization as its main source to autonomously orient towards the currently talking speaker. To increase robustness of the acoustic cue against noise we supplement the sound localization with a source detection stage. Also, we include a simple onset detector to retain fast response times. Since we only use two microphones, we are confronted with ambiguities on whether a source is in front or behind the device. We resolve these ambiguities with the help of face detection and additional moves. We tailor the system to our target scenarios in experiments with a four minute scripted conversation. In these experiments we evaluate the influence of different system settings on the responsiveness and accuracy of the device.},
  language  = {en}
}
@incollection{AltayTaddeiButenwegetal.2014,
  author    = {Altay, Okyay and Taddei, Francesca and Butenweg, Christoph and Klinkel, Sven},
  title     = {Vibration mitigation of wind turbine towers with tuned mass dampers},
  series = {Wind turbine control and monitoring. (Advances in industrial control)},
  booktitle = {Wind turbine control and monitoring. (Advances in industrial control)},
  publisher = {Springer},
  address   = {Cham ; Heidelberg ; New York ; Dordrecht ; London},
  isbn      = {978-3-319-08412-1 (Print) ; 978-3-319-08413-8 (E-Book)},
  doi       = {10.1007/978-3-319-08413-8_12},
  pages     = {337 -- 373},
  year      = {2014},
  abstract  = {Because of its minor environmental impact, electricity generation using wind power is getting remarkable. The further growth of the wind industry depends on technological solutions to the challenges in production and construction of the turbines. Wind turbine tower vibrations, which limit power generation efficiency and cause fatigue problems with high maintenance costs, count as one of the main structural difficulties in the wind energy sector. To mitigate tower vibrations auxiliary measures are necessary. The effectiveness of tuned mass damper is verified by means of a numeric study on a 5 MW onshore reference wind turbine. Hereby, also seismic-induced vibrations and soil-structure interaction are considered. Acquired results show that tuned mass damper can effectively reduce resonant tower vibrations and improve the fatigue life of wind turbines. This chapter is also concerned with tuned liquid column damper and a semiactive application of it. Due to its geometric versatility and low prime costs, tuned liquid column dampers are a good alternative to other damping measures, in particular for slender structures like wind turbines.},
  language  = {en}
}
@article{FischerSelverGezeretal.2015,
  author    = {Fischer, Felix and Selver, M. Alper and Gezer, Sinem and Dicle, Oguz and Hillen, Walter},
  title     = {Systematic Parameterization, Storage, and Representation of Volumetric DICOM Data},
  series = {Journal of Medical and Biological Engineering},
  volume    = {35},
  journal   = {Journal of Medical and Biological Engineering},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2199-4757},
  doi       = {10.1007/s40846-015-0097-5},
  pages     = {709 -- 723},
  year      = {2015},
  language  = {en}
}
@article{HacklMuellerStaatetal.2016,
  author    = {Hackl, Michael and M{\"u}ller, Lars-Peter and Staat, Manfred and Kahmann, Stephanie Lucina and Wegmann, Kilian},
  title     = {Proximal phalangeal neck fractures of the hand — a biomechanical comparison of three fixation techniques},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {148 -- 149},
  year      = {2016},
  abstract  = {Plate osteosynthesis of displaced proximal phalangeal neck fractures of the hand allows early mobilization due to a stable internal fixation. Nevertheless, joint stiffness—because of soft tissue irritation—represents a common complication leading to high complication rates. Del Pinal et al. recently reported promising clinical results for a new, minimally invasive fixation technique with a cannulated headless intramedullary compression screw. Hence, the aim of this study was to compare plate fixation of proximal phalangeal neck fractures to less two less invasive techniques: Crossed k-wire fixation and intramedullary screw fixation. We hypothesized that these fixation techniques provide inferior stability when compared to plate osteosynthesis.},
  language  = {en}
}
@article{HacklKahmannWegmannetal.2016,
  author    = {Hackl, Michael and Kahmann, Stephanie Lucina and Wegmann, Kilian and Ries, Christian and Staat, Manfred and M{\"u}ller, Lars-Peter},
  title     = {Shortening osteotomy of the proximal radius — a treatment option for isolated osteoarthritis of the lateral column of the elbow joint?},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {128 -- 129},
  year      = {2016},
  abstract  = {Treatment of posttraumatic osteoarthritis of the radial column of the elbow joint remains a challenging yet common issue. While partial joint replacement leads to high revision rates, radial head excision has shown to severely increase joint instability. Shortening osteotomy of the radius could be an option to decrease the contact pressure of the radiohumeral joint and thereby pain levels without causing valgus instability. Hence, the aim of this biomechanical study was to evaluate the effects of radial shortening on axial load distribution and valgus stability of the elbow joint.},
  language  = {en}
}
@article{HacklLeschingerStaatetal.2016,
  author    = {Hackl, Michael and Leschinger, T. and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Reconstruction of the interosseous membrane in the Essex Lopresti lesion — a biomechanical evaluation},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {130 -- 131},
  year      = {2016},
  abstract  = {Surgical reconstruction of the interosseous membrane (IOM) could restore longitudinal forearm stability to avoid persisting disability due to capituloradial and ulnocarpal impingement in Essex Lopresti lesions. This biomechanical study aimed to assess longitudinal forearm stability of intact specimens, after sectioning of the IOM and after reconstruction with a TightRope construct using either a single or double bundle technique.},
  language  = {en}
}
@article{WegmannHacklStaatetal.2016,
  author    = {Wegmann, Kilian and Hackl, Michael and Staat, Manfred and Mayer, Katharina and M{\"u}ller, Lars-Peter},
  title     = {Double plate osteosynthesis of proximal ulna fractures: biomechanical and clinical results},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4079-0},
  pages     = {58 -- 59},
  year      = {2016},
  abstract  = {While plate fixation of proximal ulna fractures might lead to superior clinical results compared to tension band wiring, regular plates represent an established risk factor for wound complications. The olecranon double plates (Medartis, Basel, CH) might decrease complications related to the osteosynthesis because of their low profile and better anatomical fit. This study aimed to evaluate the biomechanical performance and clinical results of the olecranon double plates.},
  language  = {en}
}
@article{ScheidweilerTriesch2016,
  author    = {Scheidweiler, Robert and Triesch, Eberhard},
  title     = {A note on the duality between matchings and vertex covers in balanced hypergraphs},
  series = {Journal of Combinatorial Optimization},
  volume    = {32},
  journal   = {Journal of Combinatorial Optimization},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-2886},
  doi       = {10.1007/s10878-015-9887-5},
  pages     = {639 -- 644},
  year      = {2016},
  abstract  = {We present a new Min-Max theorem for an optimization problem closely connected to matchings and vertex covers in balanced hypergraphs. The result generalizes Kőnig's Theorem (Berge and Las Vergnas in Ann N Y Acad Sci 175:32-40, 1970; Fulkerson et al. in Math Progr Study 1:120-132, 1974) and Hall's Theorem (Conforti et al. in Combinatorica 16:325-329, 1996) for balanced hypergraphs.},
  language  = {en}
}
@article{LopesLeandroCarvalhoetal.2017,
  author    = {Lopes, Pedro and Leandro, Jorge and Carvalho, Rita F. and Bung, Daniel B.},
  title     = {Alternating skimming flow over a stepped spillway},
  series = {Environmental Fluid Mechanics},
  volume    = {17},
  journal   = {Environmental Fluid Mechanics},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1510},
  doi       = {10.1007/s10652-016-9484-x},
  pages     = {303 -- 322},
  year      = {2017},
  language  = {en}
}
@article{PinkenburgSchiffelsSelmer2016,
  author    = {Pinkenburg, Olaf and Schiffels, Johannes and Selmer, Thorsten},
  title     = {Das CoLibry-Konzept - ein Werkzeugkasten f{\"u}r die Synthetische Biologie: Bioproduktion},
  series = {BIOspektrum},
  volume    = {22},
  journal   = {BIOspektrum},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/s12268-016-0734-8},
  pages     = {593 -- 595},
  year      = {2016},
  abstract  = {Regardless of size or destination, synthetic biology starts with com-parably small information units, which need to be combined and properly arranged in order to achieve a certain goal. This may be the de novo synthesis of individual genes from oligonucleotides, a shuffling of protein domains in order to create novel biocatalysts, the assembly of multiple enzyme encoding genes in metabolic pathway design, or strain development at the production stage. The CoLibry concept has been designed in order to close the gap between recombinant production of individual genes and genome editing.},
  language  = {de}
}