@incollection{StaatHeitzer2003, author = {Staat, Manfred and Heitzer, Michael}, title = {Probabilistic limit and shakedown problems}, series = {Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems}, volume = {15}, booktitle = {Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems}, editor = {Staat, Manfred and Heitzer, Michael}, publisher = {John von Neumann Institute for Computing (NIC)}, address = {J{\"u}lich}, isbn = {3-00-010001-6}, pages = {217 -- 268}, year = {2003}, language = {en} } @incollection{BhattaraiStaat2018, author = {Bhattarai, Aroj and Staat, Manfred}, title = {Mechanics of soft tissue reactions to textile mesh implants}, series = {Biological, Physical and Technical Basics of Cell Engineering}, booktitle = {Biological, Physical and Technical Basics of Cell Engineering}, editor = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya}, publisher = {Springer}, address = {Singapore}, isbn = {978-981-10-7904-7}, doi = {10.1007/978-981-10-7904-7_11}, pages = {251 -- 275}, year = {2018}, abstract = {For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.}, language = {en} } @incollection{Eggert2019, author = {Eggert, Mathias}, title = {Big Data Research - How to Structure the Changes of the Past Decade?}, series = {The Art of Structuring}, booktitle = {The Art of Structuring}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-06234-7}, doi = {10.1007/978-3-030-06234-7_26}, pages = {271 -- 281}, year = {2019}, abstract = {In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.}, language = {en} } @incollection{RoethPielen2018, author = {R{\"o}th, Thilo and Pielen, Michael}, title = {Personal Public Vehicle - ein urbanes Fahrzeugkonzept f{\"u}r die „Shared Mobility" der Zukunft}, series = {Karosseriebautage Hamburg 2018, 16. ATZ-Fachtagung}, booktitle = {Karosseriebautage Hamburg 2018, 16. ATZ-Fachtagung}, publisher = {Springer Vieweg}, address = {Wiesbaden}, doi = {10.1007/978-3-658-22038-9_13}, pages = {189 -- 199}, year = {2018}, abstract = {Die urbane Mobilit{\"a}t ist im Wandel und insbesondere neue innovative Gesch{\"a}ftsmodelle werden einen wesentlichen Teil zur L{\"o}sung von k{\"u}nftigen Mobilit{\"a}tsbed{\"u}rfnissen beitragen. Die sogenannte „Shared Mobility" gilt aktuell neben der Elektrifizierung des Antriebes und autonomem Fahrzeugtechnologien als einer der wichtigsten Trendthemen in der Automobilindustrie. Neue Mobilit{\"a}tsdienstleistungen verlangen dabei verst{\"a}rkt auch neue Fahrzeugkonzepte.}, language = {de} } @incollection{DachwaldOhndorf2019, author = {Dachwald, Bernd and Ohndorf, Andreas}, title = {Global optimization of continuous-thrust trajectories using evolutionary neurocontrol}, series = {Modeling and Optimization in Space Engineering}, booktitle = {Modeling and Optimization in Space Engineering}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-10501-3}, doi = {10.1007/978-3-030-10501-3_2}, pages = {33 -- 57}, year = {2019}, abstract = {Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.}, language = {en} } @incollection{WolfKapelyukhScheeretal.2015, author = {Wolf, C. Roland and Kapelyukh, Yury and Scheer, Nico and Henderson, Colin J.}, title = {Application of Humanised and Other Transgenic Models to Predict Human Responses to Drugs}, editor = {Wilson, Alan G. E.}, publisher = {RSC Publ.}, address = {Cambridge}, isbn = {978-1-78262-778-4}, doi = {10.1039/9781782622376-00152}, pages = {152 -- 176}, year = {2015}, abstract = {The use of transgenic animal models has transformed our knowledge of complex biochemical pathways in vivo. It has allowed disease processes to be modelled and used in the development of new disease prevention and treatment strategies. They can also be used to define cell- and tissue-specific pathways of gene regulation. A further major application is in the area of preclinical development where such models can be used to define pathways of chemical toxicity, and the pathways that regulate drug disposition. One major application of this approach is the humanisation of mice for the proteins that control drug metabolism and disposition. Such models can have numerous applications in the development of drugs and in their more sophisticated use in the clinic.}, language = {en} } @incollection{HendersonWolfScheer2009, author = {Henderson, Colin J. and Wolf, C. Roland and Scheer, Nico}, title = {The use of transgenic animals to study drug metabolism}, series = {Handbook of Drug Metabolism. 2nd Edition}, booktitle = {Handbook of Drug Metabolism. 2nd Edition}, editor = {Woolf, Thomas F.}, publisher = {Informa Healthcare}, address = {New York}, isbn = {978-1-4200-7647-9}, pages = {637 -- 658}, year = {2009}, language = {en} } @incollection{BosseBarnat2019, author = {Bosse, Elke and Barnat, Miriam}, title = {Kombination quantitativer und qualitativer Methoden zur Untersuchung der Studieneingangsphase}, series = {Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik}, booktitle = {Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik}, editor = {Jenert, Tobias and Reinmann, Gabi and Schmohl, Tobias}, publisher = {Springer VS}, address = {Wiesbaden}, isbn = {978-3-658-20308-5}, pages = {169 -- 184}, year = {2019}, language = {de} } @incollection{FranzenSteckenPfaffetal.2019, author = {Franzen, Julian and Stecken, Jannis and Pfaff, Raphael and Kuhlenk{\"o}tter, Bernd}, title = {Using the Digital Shadow for a Prescriptive Optimization of Maintenance and Operation : The Locomotive in the Context of the Cyber-Physical System}, series = {Advances in Production, Logistics and Traffic}, booktitle = {Advances in Production, Logistics and Traffic}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-13535-5}, doi = {10.1007/978-3-030-13535-5_19}, pages = {265 -- 276}, year = {2019}, abstract = {In competition with other modes of transport, rail freight transport is looking for solutions to become more attractive. Short-term success can be achieved through the data-driven optimization of operations and maintenance as well as the application of novel strategies such as prescriptive maintenance. After introducing the concept of prescriptive maintenance, this paper aims to prove that vehicle-focused applications of this approach indeed have the potential to increase attractiveness. However, even greater advantages can be activated if data from the horizontal network of the vehicle is available. Drawing on the state of the art in research and technology in the field of cyber-physical systems (CPS) as well as digital twins and shadows, our work serves to design a system of systems for the horizontal interconnection of a rail vehicle and to conceptualize a draft for a digital twin of a locomotive.}, language = {en} } @incollection{MeskourisButenwegHinzenetal.2019, author = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger}, title = {Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response}, series = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-57550-5 (Online)}, doi = {10.1007/978-3-662-57550-5_3}, pages = {153 -- 196}, year = {2019}, abstract = {Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.}, language = {en} } @incollection{SamuelssonScheerWilsonetal.2017, author = {Samuelsson, K. and Scheer, Nico and Wilson, I. and Wolf, C.R. and Henderson, C.J.}, title = {Genetically Humanized Animal Models}, series = {Comprehensive Medicinal Chemistry III. 3rd Edition}, booktitle = {Comprehensive Medicinal Chemistry III. 3rd Edition}, editor = {Chackalamannil, Samuel}, publisher = {Elsevier}, address = {Saint Louis}, isbn = {978-0-12-803201-5}, doi = {10.1016/B978-0-12-409547-2.12376-5}, pages = {130 -- 149}, year = {2017}, abstract = {Genetically humanized mice for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging as promising in vivo models for improved prediction of the pharmacokinetic, drug-drug interaction, and safety characteristics of compounds in humans. This is an overview on the genetically humanized and chimeric liver-humanized mouse models, which are illustrated with examples of their utility in drug metabolism and toxicity studies. The models are compared to give guidance for selection of the most appropriate model by highlighting advantages and disadvantages to be carefully considered when used for studies in drug discovery and development.}, language = {en} } @incollection{ScheerChuSalphatietal.2016, author = {Scheer, Nico and Chu, Xiaoyan and Salphati, Laurent and Zamek-Gliszczynski, Maciej J.}, title = {Knockout and humanized animal models to study membrane transporters in drug development}, series = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development}, booktitle = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development}, editor = {Nicholls, Glynis}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, isbn = {978-1-78262-379-3}, doi = {10.1039/9781782623793-00298}, pages = {298 -- 332}, year = {2016}, language = {en} } @incollection{Timme2020, author = {Timme, Michael}, title = {Kommentierung zu den \S\S 24 - 27}, series = {M{\"u}nchener Kommentar zum Wettbewerbsrecht Bd. 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB) \S\S 1-96, 185, 186, Verfahren vor den europ{\"a}ischen Gerichten}, booktitle = {M{\"u}nchener Kommentar zum Wettbewerbsrecht Bd. 2: Gesetz gegen Wettbewerbsbeschr{\"a}nkungen (GWB) \S\S 1-96, 185, 186, Verfahren vor den europ{\"a}ischen Gerichten}, edition = {3. Auflage}, publisher = {C.H. Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-72772-6}, year = {2020}, language = {de} } @incollection{MatchaKarzelPahl2013, author = {Matcha, Heike and Karzel, R{\"u}diger and Pahl, Katja-Annika}, title = {Lehre als Praxis als Forschung: 1:1 Entwicklung von Messest{\"a}nden unter Einsatz parametrisierter Software und computergesteuerter Herstellung}, series = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung}, booktitle = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung}, publisher = {TUDpress - Verlag der Wissenschaften}, address = {Dresden}, isbn = {978-3-94433111-9}, pages = {95 -- 108}, year = {2013}, language = {de} } @incollection{MatchaBarczik2011, author = {Matcha, Heike and Barczik, G{\"u}nter}, title = {Mass Diversity: Individualized housing via parametric typology}, series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism}, booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism}, editor = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg}, publisher = {Edition Axel Menges}, address = {Fellbach}, isbn = {978-3-936681-47-5}, pages = {354 -- 358}, year = {2011}, language = {en} } @incollection{Matcha2010, author = {Matcha, Heike}, title = {Regelbasierte Planung - Parametrik}, series = {Digitale Prozesse: Planung, Gestaltung, Fertigung}, booktitle = {Digitale Prozesse: Planung, Gestaltung, Fertigung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Ed. Detail}, address = {M{\"u}nchen}, isbn = {978-3-920034-35-5}, pages = {24 -- 24}, year = {2010}, language = {de} } @incollection{Matcha2010, author = {Matcha, Heike}, title = {Regelbasierte Planung - Parametrik}, series = {Digitale Prozesse : Planung, Gestaltung, Fertigung}, booktitle = {Digitale Prozesse : Planung, Gestaltung, Fertigung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Detail}, address = {M{\"u}nchen}, isbn = {978-3-95553-022-8}, doi = {10.11129/detail.9783955530228}, pages = {24 -- 24}, year = {2010}, language = {de} } @incollection{MatchaBarczikAgkathidis2009, author = {Matcha, Heike and Barczik, G{\"u}nter and Agkathidis, Asterios}, title = {Produktive Prozesse: Mehr Vielfalt, Komplexit{\"a}t und Kreativit{\"a}t im Entwerfen mittels parametrisierter generativer Algorithmen}, series = {Modulare Strukturen in Entwurf und Architektur}, booktitle = {Modulare Strukturen in Entwurf und Architektur}, publisher = {BIS-Publishers}, address = {Amsterdam}, isbn = {978-90-6369-208-7}, pages = {126 -- 130}, year = {2009}, language = {de} } @incollection{Matcha2007, author = {Matcha, Heike}, title = {Vom Industriellen Bauen zu parametrischen Planungsprozessen}, series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Technische Universit{\"a}t Darmstadt}, address = {Darmstadt}, pages = {12 -- 13}, year = {2007}, language = {de} } @incollection{Matcha2007, author = {Matcha, Heike}, title = {Parametrischer Geb{\"a}udeentwurf}, series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Technische Universit{\"a}t Darmstadt}, address = {Darmstadt}, pages = {14 -- 15}, year = {2007}, language = {de} } @incollection{IbanezSanchezWolf2020, author = {Ibanez-Sanchez, Gema and Wolf, Martin}, title = {Interactive Process Mining-Induced Change Management Methodology for Healthcare}, series = {Interactive Process Mining in Healthcare}, booktitle = {Interactive Process Mining in Healthcare}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-53993-1 (Online)}, doi = {10.1007/978-3-030-53993-1_16}, pages = {267 -- 293}, year = {2020}, abstract = {The adoption of the Digital Health Transformation is a tremendous paradigm change in health organizations, which is not a trivial process in reality. For that reason, in this chapter, it is proposed a methodology with the objective to generate a changing culture in healthcare organisations. Such a change culture is essential for the successful implementation of any supporting methods like Interactive Process Mining. It needs to incorporate (mostly) new ways of team-based and evidence-based approaches for solving structural problems in a digital healthcare environment.}, language = {en} } @incollection{BozakovSander2013, author = {Bozakov, Zdravko and Sander, Volker}, title = {OpenFlow: A Perspective for Building Versatile Networks}, series = {Network-Embedded Management and Applications}, booktitle = {Network-Embedded Management and Applications}, publisher = {Springer}, address = {New York, NY}, isbn = {978-1-4419-6769-5}, doi = {10.1007/978-1-4419-6769-5_11}, pages = {217 -- 245}, year = {2013}, language = {en} } @incollection{FateriGebhardt2020, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Introduction to Additive Manufacturing}, series = {3D Printing of Optical Components}, booktitle = {3D Printing of Optical Components}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-58960-8}, doi = {10.1007/978-3-030-58960-8_1}, pages = {1 -- 22}, year = {2020}, abstract = {Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the "printed" layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.}, language = {en} } @incollection{ButenwegHoltschoppen2019, author = {Butenweg, Christoph and Holtschoppen, Britta}, title = {Seismic design of structures and components in industrial units}, series = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-57550-5}, doi = {10.1007/978-3-662-57550-5_5}, pages = {359 -- 481}, year = {2019}, abstract = {Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.}, language = {en} } @incollection{GiresiniButenweg2019, author = {Giresini, Linda and Butenweg, Christoph}, title = {Earthquake resistant design of structures according to Eurocode 8}, series = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-57550-5 (Online)}, doi = {10.1007/978-3-662-57550-5_4}, pages = {197 -- 358}, year = {2019}, abstract = {The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.}, language = {en} } @incollection{ButenwegBollenbeck2003, author = {Butenweg, Christoph and Bollenbeck, S.}, title = {Mauerwerksbauten unter Erdbebenbelastung}, series = {Bauwerke und Erdbeben}, booktitle = {Bauwerke und Erdbeben}, publisher = {Vieweg}, address = {Wiesbaden}, isbn = {3-528-02574-3}, pages = {385 -- 397}, year = {2003}, language = {de} } @incollection{ButenwegKubalskiMarinkovicetal.2016, author = {Butenweg, Christoph and Kubalski, Thomas and Marinkovic, Marko and Pfetzing, Thomas and Ismail, Mohammed and Fehling, Ekkehard}, title = {Ausfachungen aus Ziegelmauerwerk}, series = {Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis}, booktitle = {Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-03131-5}, year = {2016}, language = {de} } @incollection{Butenweg2017, author = {Butenweg, Christoph}, title = {Passt, wackelt und hat Luft: Mauerwerksbauten aus Leichtbeton in Erdbebengebieten}, series = {Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausf{\"u}hren}, booktitle = {Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausf{\"u}hren}, publisher = {Bauverl.}, address = {G{\"u}tersloh}, isbn = {978-3-7625-3676-5}, pages = {136 -- 140}, year = {2017}, language = {de} } @incollection{ButenwegEbenau1996, author = {Butenweg, Christoph and Ebenau, C.}, title = {Entwicklung eines objekt-orientierten FE-Programms}, series = {Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96}, booktitle = {Forum Bauinformatik - Junge Wissenschaftler forschen, Cottbus '96}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-18-313504-2}, pages = {60 -- 65}, year = {1996}, language = {de} } @incollection{GebhardtHoetter2019, author = {Gebhardt, Andreas and Hoetter, Jan-Steffen}, title = {Rapid Tooling}, series = {CIRP Encyclopedia of Production Engineering}, booktitle = {CIRP Encyclopedia of Production Engineering}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-53120-4}, doi = {10.1007/978-3-662-53120-4}, pages = {39 -- 52}, year = {2019}, language = {en} } @incollection{Blome2013, author = {Blome, Hans-Joachim}, title = {Die Tragweite der physikalischen Kosmologie}, series = {Exploring Uncertainty}, booktitle = {Exploring Uncertainty}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-00897-0}, doi = {10.1007/978-3-658-00897-0_6}, pages = {105 -- 150}, year = {2013}, language = {de} } @incollection{ButenwegGellertMeyer2021, author = {Butenweg, Christoph and Gellert, Christoph and Meyer, Udo}, title = {Erdbebenbemessung bei Mauerwerksbauten}, series = {Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau}, booktitle = {Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {9783433032930}, doi = {10.1002/9783433610732.ch12}, pages = {329 -- 355}, year = {2021}, abstract = {Der vorliegende Beitrag stellt den seismischen Nachweis von Mauerwerksbauten in Deutschland auf Grundlage der DIN EN 1998-1/NA vor, wobei auch die wesentlichen {\"A}nderungen zu der Norm DIN 4149 vergleichend erl{\"a}utert werden. Vorgestellt werden die Definition der Erdbebeneinwirkung, das seismische Verhalten von Mauerwerksbauten und die Erl{\"a}uterung der Rechenverfahren. Darauf aufbauend wird die Anwendung an drei Praxisbeispielen demonstriert.}, language = {de} } @incollection{AkimbekovDigelRazzaque2022, author = {Akimbekov, Nuraly S. and Digel, Ilya and Razzaque, Mohammed S.}, title = {Role of vitamins in maintaining structure and function of intestinal microbiome}, series = {Comprehensive Gut Microbiota}, booktitle = {Comprehensive Gut Microbiota}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-12-822036-8}, doi = {10.1016/B978-0-12-819265-8.00043-7}, pages = {320 -- 334}, year = {2022}, abstract = {The recent advances in microbiology have shed light on understanding the role of vitamins beyond the nutritional range. Vitamins are critical in contributing to healthy biodiversity and maintaining the proper function of gut microbiota. The sharing of vitamins among bacterial populations promotes stability in community composition and diversity; however, this balance becomes disturbed in various pathologies. Here, we overview and analyze the ability of different vitamins to selectively and specifically induce changes in the intestinal microbial community. Some schemes and regularities become visible, which may provide new insights and avenues for therapeutic management and functional optimization of the gut microbiota.}, language = {en} } @incollection{AbelBoninAlbrachtetal.2015, author = {Abel, Thomas and Bonin, Dominik and Albracht, Kirsten and Zeller, Sebastian and Burkett, Brendan}, title = {Kinematische Untersuchung der Kurbelbewegung im Handcycling: Entwicklung einer sportartspezifischen Methode}, series = {Behindertensport 1951-2011 : Historische und aktuelle Aspekte im nationalen und internationalen Dialog}, booktitle = {Behindertensport 1951-2011 : Historische und aktuelle Aspekte im nationalen und internationalen Dialog}, publisher = {Meyer \& Meyer}, address = {Aachen}, isbn = {9783898997249}, pages = {82 -- 91}, year = {2015}, language = {de} } @incollection{DuongNguyenStaat2017, author = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred}, title = {Physical response of hyperelastic models for composite materials and soft tissues}, series = {Advances in Composite Material}, booktitle = {Advances in Composite Material}, publisher = {Scientific Research Publishing}, address = {Wuhan}, isbn = {978-1-61896-300-0 (Hardcover), 978-1-61896-299-7 (Paperback)}, pages = {316}, year = {2017}, language = {en} } @incollection{SchulteZurhausen2016, author = {Schulte-Zurhausen, Manfred}, title = {Systemisches Management von Organisationsprojekten}, series = {Projekte systemisch managen! Wie Sie soziale und rationale Prozesse in Projekten achtsam steuern}, booktitle = {Projekte systemisch managen! Wie Sie soziale und rationale Prozesse in Projekten achtsam steuern}, editor = {Stelzer-Rothe, Thomas}, publisher = {BWV Berliner Wissenschafts-Verlag}, address = {Berlin}, isbn = {978-3-8305-3647-5}, pages = {9 -- 34}, year = {2016}, language = {de} } @incollection{Tippkoetter2016, author = {Tippk{\"o}tter, Nils}, title = {Grundlagen der bio-chemischen Umwandlung}, series = {Energie aus Biomasse : Grundlagen, Techniken und Verfahren}, booktitle = {Energie aus Biomasse : Grundlagen, Techniken und Verfahren}, editor = {Kaltschmidt, Martin}, edition = {3., aktualisierte, erweiterte Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-47437-2 (Print)}, doi = {10.1007/978-3-662-47438-9}, pages = {1447 -- 1500}, year = {2016}, language = {de} } @incollection{HahnKellyMuffleretal.2011, author = {Hahn, Thomas and Kelly, Svenja and Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland}, title = {Extraction of lignocellulose and algae for the production of bulk and fine chemicals}, series = {Industrial scale natural products extraction}, booktitle = {Industrial scale natural products extraction}, editor = {Hans-J{\"o}rg, Bart and Pilz, Stephan}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-527-32504-7 (Print)}, doi = {10.1002/9783527635122}, pages = {221 -- 245}, year = {2011}, language = {en} } @incollection{MufflerPothSiekeretal.2011, author = {Muffler, Kai and Poth, Sabastian and Sieker, Tim and Tippk{\"o}tter, Nils and Ulber, Roland and Sell, Dieter}, title = {Bio-feedstocks}, series = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology}, booktitle = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology}, editor = {Moo-Young, Murray}, edition = {2. edition}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-444-53352-4}, doi = {10.1016/B978-0-08-088504-9.00088-X}, pages = {93 -- 101}, year = {2011}, language = {en} } @incollection{MufflerTippkoetterUlber2010, author = {Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland}, title = {Chemical feedstocks and fine chemicals from other substrates}, series = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)}, booktitle = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)}, editor = {Timmis, Kenneth N.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-540-77588-1}, doi = {10.1007\%2F978-3-540-77587-4_214}, pages = {2891 -- 2902}, year = {2010}, language = {en} } @incollection{StraubeFrohn2007, author = {Straube, and Frohn, Jan}, title = {Kundennutzen durch logistische Mehrwertleistungen}, series = {Handbuch der Kontraktlogistik}, booktitle = {Handbuch der Kontraktlogistik}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {9783527502035}, pages = {181 -- 198}, year = {2007}, language = {de} } @incollection{BarnatBosseTight2017, author = {Barnat, Miriam and Bosse, Elke and Tight, Malcolm}, title = {The Guiding Role of Theory in Mixed-Methods Research: Combining Individual and Institutional Perspectives on the Transition to Higher Education}, series = {Theory and Method in Higher Education Research. Vol 3}, booktitle = {Theory and Method in Higher Education Research. Vol 3}, publisher = {Emerald Publishing Limited}, isbn = {978-1-78743-222-2}, doi = {10.1108/S2056-375220170000003001}, pages = {1 -- 19}, year = {2017}, abstract = {The methodological discourse of mixed-methods research offers general procedures to combine quantitative and qualitative methods for investigating complex fields of research such as higher education. However, integrating different methods still poses considerable challenges. To move beyond general recommendations for mixed-methods research, this chapter proposes to discuss methodological issues with respect to a particular research domain. Taking current studies on the transition to higher education as an example, the authors first provide an overview of the potentials and limitations of quantitative and qualitative methods in the research domain. Second, they show the need for a conceptual framework grounded in the theory of the research object to guide the integration of different methods and findings. Finally, an example study that investigates transition with regard to the interplay of the individual student and the institutional context serves to illustrate the guiding role of theory. The framework integrates different theoretical perspectives on transition, informs the selection of the research methods, and defines the nexus of the two strands that constitute the mixed-methods design. As the interplay of individual and context is of concern for teaching and learning in general, the example presented may be fruitful for the wider field of higher education research.}, language = {en} } @incollection{PielenRoethFlatten2018, author = {Pielen, Michael and R{\"o}th, Thilo and Flatten, T.}, title = {Erfolgsfaktoren k{\"u}nftiger Gesch{\"a}ftsmodelle von urbanen, geteilten Mobilit{\"a}tsdienstleistungen}, series = {Mobilit{\"a}t und digitale Transformation. (9. Wissenschaftsforum Mobilit{\"a}t. Tagungsband)}, booktitle = {Mobilit{\"a}t und digitale Transformation. (9. Wissenschaftsforum Mobilit{\"a}t. Tagungsband)}, editor = {Proff, H.}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-20779-3}, doi = {10.1007/978-3-658-20779-3_2}, pages = {435 -- 448}, year = {2018}, abstract = {Digitalisierung bezeichnet die Nutzung großer Datenmengen, die zu einer umfassenden Vernetzung aller Bereiche der Wirtschaft und Gesellschaft f{\"u}hren wird (BMWi, 2015 und {\"a}hnlich K{\"o}hler/Wollschl{\"a}ger, 2014: 79). Sie umfasst die Erhebung von analogen Informationen („Big Data" in einem engen Sinne; z.B. O´Leary, 2013), ihre Speicherung in einem digitaltechnischen System (lokale Speicherung oder „Cloud Computing" durch die Weiterentwickelung des Internets; z.B. Hashem et al., 2015: 101), die Analyse und Interpretation sowie den Transfer in andere Systeme („Internet der Dinge" bzw. „Internet of Things"; z.B. Ashton, 2009).}, language = {de} } @incollection{BhattaraiFrotscherStaat2018, author = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred}, title = {Computational Analysis of Pelvic Floor Dysfunction}, series = {Women's Health and Biomechanics}, booktitle = {Women's Health and Biomechanics}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-71574-2}, doi = {10.1007/978-3-319-71574-2_17}, pages = {217 -- 230}, year = {2018}, abstract = {Pelvic floor dysfunction (PFD) is characterized by the failure of the levator ani (LA) muscle to maintain the pelvic hiatus, resulting in the descent of the pelvic organs below the pubococcygeal line. This chapter adopts the modified Humphrey material model to consider the effect of the muscle fiber on passive stretching of the LA muscle. The deformation of the LA muscle subjected to intra-abdominal pressure during Valsalva maneuver is compared with the magnetic resonance imaging (MRI) examination of a nulliparous female. Numerical result shows that the fiber-based Humphrey model simulates the muscle behavior better than isotropic constitutive models. Greater posterior movement of the LA muscle widens the levator hiatus due to lack of support from the anococcygeal ligament and the perineal structure as a consequence of birth-related injury and aging. Old and multiparous females with uncontrolled urogenital and rectal hiatus tend to develop PFDs such as prolapse and incontinence.}, language = {en} } @incollection{Wilke2015, author = {Wilke, Thomas}, title = {Weltkulturerbe(n). Die Residenzen des Hauses Savoyen in Turin und Umgebung}, series = {WeltkulturerbeN : Formen, Funktionen und Objekte kulturellen Erinnerns im und an das Mittelalter : Vortr{\"a}ge der Ringvorlesung des Zentrums f{\"u}r Mittelalterstudien der Otto-Friedrich-Universit{\"a}t Bamberg im Sommersemester 2013}, booktitle = {WeltkulturerbeN : Formen, Funktionen und Objekte kulturellen Erinnerns im und an das Mittelalter : Vortr{\"a}ge der Ringvorlesung des Zentrums f{\"u}r Mittelalterstudien der Otto-Friedrich-Universit{\"a}t Bamberg im Sommersemester 2013}, editor = {Schindler, Andrea}, publisher = {University of Bamberg Press}, address = {Bamberg}, isbn = {978-3-86309-385-3}, pages = {167 -- 196}, year = {2015}, language = {de} } @incollection{Wilke2016, author = {Wilke, Thomas}, title = {Planning Process of the Di Castellamonte's Chapel of the Holy Shroud}, series = {Carlo e Amedeo di Castellamonte : 1571-1683, ingegneri e architetti per i duchi di Savoia}, booktitle = {Carlo e Amedeo di Castellamonte : 1571-1683, ingegneri e architetti per i duchi di Savoia}, editor = {Merlotti, Andrea}, publisher = {Campisano editore}, address = {Rom}, isbn = {978-88-98229-57-4}, pages = {141 -- 152}, year = {2016}, language = {en} } @incollection{HoehneNarr2006, author = {H{\"o}hne, Tim and Narr, Claus}, title = {Konsequenzen f{\"u}r die {\"u}berbetriebliche IT-Unterst{\"u}tzung}, series = {Liefertreue im Maschinen- und Anlagenbau}, booktitle = {Liefertreue im Maschinen- und Anlagenbau}, editor = {Schuh, G{\"u}nther}, isbn = {3-926690-02-X}, year = {2006}, language = {de} } @incollection{ChwallekGoelzerReichert2018, author = {Chwallek, Constanze and G{\"o}lzer, Kaan and Reichert, Walter}, title = {Faymonville - Wachstum als Komplexit{\"a}tstreiber}, series = {Fallstudienkompendium Hidden Champions - Innovationen f{\"u}r den Weltmarkt}, booktitle = {Fallstudienkompendium Hidden Champions - Innovationen f{\"u}r den Weltmarkt}, publisher = {Springer Gabler}, isbn = {978-3-658-17829-1}, doi = {10.1007/978-3-658-17829-1_18}, pages = {299 -- 312}, year = {2018}, abstract = {Die Fallstudie FAYMONVILLE besch{\"a}ftigt sich damit, wie es dem Familienunternehmen Faymonville aus Ostbelgien gelungen ist, sich zu einem der f{\"u}hrenden Hersteller in seiner Branche zu entwickeln. Die gezielte Identifizierung neuer M{\"a}rkte, die Fokussierung auf die relevanten Kundenbed{\"u}rfnisse und eine konsistente Produktpolitik mit einem abgestimmten Fertigungskonzept legen die Grundsteine f{\"u}r den Erfolg. Das vorliegende Fallbeispiel zeigt anschaulich, wie es gelingen kann, den prinzipiellen Widerspruch zwischen wirtschaftlicher und kundenindividueller Fertigung erfolgreich aufzul{\"o}sen.}, language = {de} } @incollection{Wilke2010, author = {Wilke, Thomas}, title = {Piemont - Grenzregion zwischen Frankreich und Italien}, series = {Sehnsucht Italien - Die sch{\"o}nsten Kunstlandschaften von Piemont bis Sizilien}, booktitle = {Sehnsucht Italien - Die sch{\"o}nsten Kunstlandschaften von Piemont bis Sizilien}, editor = {Heussler, Carla}, publisher = {WBG}, address = {Darmstadt}, isbn = {978-3-534-22986-4}, pages = {13 -- 24}, year = {2010}, language = {de} } @incollection{Wilke2010, author = {Wilke, Thomas}, title = {Vorlagegraphik versus K{\"u}nstlergraphik: {\"U}berlegungen zu Jean Lepautres Kupferstichfolgen f{\"u}r die Innenraumgestaltung}, series = {Druckgraphik : zwischen Reproduktion und Invention}, booktitle = {Druckgraphik : zwischen Reproduktion und Invention}, editor = {Castor, Markus A.}, publisher = {Dt. Kunstverl.}, address = {Berlin}, isbn = {978-3-422-06940-4}, pages = {419 -- 432}, year = {2010}, language = {de} } @incollection{Wilke2007, author = {Wilke, Thomas}, title = {Architektonische Innovation in Deutschland und Italien vor 1848: Gottfried Semper und Alessandro Antonelli}, series = {Gottfried Semper - Dresden und Europa : die moderne Renaissance der K{\"u}nste ; Akten des Internationalen Kolloquiums der Technischen Universit{\"a}t Dresden aus Anlass des 200. Geburtstags von Gottfried Semper}, booktitle = {Gottfried Semper - Dresden und Europa : die moderne Renaissance der K{\"u}nste ; Akten des Internationalen Kolloquiums der Technischen Universit{\"a}t Dresden aus Anlass des 200. Geburtstags von Gottfried Semper}, editor = {Karge, Henrik}, publisher = {Dt. Kunstverl.}, address = {Berlin}, isbn = {3-422-06606-3}, pages = {277 -- 288}, year = {2007}, language = {de} } @incollection{Wilke2017, author = {Wilke, Thomas}, title = {Peyre, Marie-Josephe}, series = {Allgemeines K{\"u}nstler-Lexikon. Bd. 95}, booktitle = {Allgemeines K{\"u}nstler-Lexikon. Bd. 95}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-023261-5}, pages = {301 -- 302}, year = {2017}, language = {de} } @incollection{Wilke2017, author = {Wilke, Thomas}, title = {Peyre, Antoine-Francois}, series = {Allgemeines K{\"u}nstler-Lexikon. Bd. 95}, booktitle = {Allgemeines K{\"u}nstler-Lexikon. Bd. 95}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-023261-5}, pages = {300 -- 301}, year = {2017}, language = {de} } @incollection{Wilke2017, author = {Wilke, Thomas}, title = {Patte, Pierre}, series = {Allgemeines K{\"u}nstler-Lexikon. Bd. 94}, booktitle = {Allgemeines K{\"u}nstler-Lexikon. Bd. 94}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-023260-8}, pages = {429 -- 430}, year = {2017}, language = {de} } @incollection{Wilke2017, author = {Wilke, Thomas}, title = {Ranson, Pierre}, series = {Allgemeines K{\"u}nstler-Lexikon. Online}, booktitle = {Allgemeines K{\"u}nstler-Lexikon. Online}, publisher = {De Gruyter}, address = {Berlin}, year = {2017}, language = {de} } @incollection{Wilke2015, author = {Wilke, Thomas}, title = {Lepautre}, series = {Allgemeines K{\"u}nstler-Lexikon. Bd. 84}, booktitle = {Allgemeines K{\"u}nstler-Lexikon. Bd. 84}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-023189-2}, pages = {157 -- 160}, year = {2015}, language = {de} } @incollection{HerrmannKearneyRoegeretal.2017, author = {Herrmann, Ulf and Kearney, D. and R{\"o}ger, M. and Prahl, C.}, title = {System performance measurements}, series = {The Performance of Concentrated Solar Power (CSP) Systems : Modelling, Measurement and Assessment}, booktitle = {The Performance of Concentrated Solar Power (CSP) Systems : Modelling, Measurement and Assessment}, publisher = {Woodhead Publishing}, address = {Duxford}, isbn = {978-0-08-100448-7}, doi = {https://doi.org/10.1016/B978-0-08-100447-0.00005-5}, pages = {115 -- 165}, year = {2017}, abstract = {This chapter introduces performance and acceptance testing and describes state-of-the-art tools, methods, and instruments to assess the plant performance or realize plant acceptance testing. The status of the development of standards for performance assessment is given.}, language = {en} } @incollection{DrummLemckeOberle2007, author = {Drumm, Christian and Lemcke, Jens and Oberle, Daniel}, title = {Business Process Management And Semantic Technologies}, series = {The Semantic Web}, booktitle = {The Semantic Web}, publisher = {Springer}, address = {Boston, MA}, isbn = {978-0-387-48531-7}, doi = {10.1007/978-0-387-48531-7_10}, pages = {207 -- 239}, year = {2007}, language = {en} } @incollection{KrollLudwigs2011, author = {Kroll-Ludwigs, Kathrin}, title = {Einleitung vor \S 1297 BGB}, series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, edition = {13., neu bearb. Aufl.}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {9783504471019}, pages = {4299}, year = {2011}, language = {de} } @incollection{KrollLudwigs2011, author = {Kroll-Ludwigs, Kathrin}, title = {Vor \S 1297 bis \S 1302 BGB (Verl{\"o}bnis)}, series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, edition = {13., neu bearb. Aufl.}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {9783504471019}, year = {2011}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Art. 48 EGBGB: Wahl eines in einem anderen Mitgliedstaat der Europ{\"a}ischen Union erworbenen Namens, Rn. 5-8, Rn. 11-14, Rn. 45-47, Rn. 48-51}, series = {Beck'scher Online-Großkommentar zum B{\"u}rgerlichen Recht (BeckOGK), Band: Internationales Privatrecht}, booktitle = {Beck'scher Online-Großkommentar zum B{\"u}rgerlichen Recht (BeckOGK), Band: Internationales Privatrecht}, editor = {Weller, Marc-Philippe and Kindler, Peter}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Names of individuals}, series = {European Encyclopedia of Private International Law}, booktitle = {European Encyclopedia of Private International Law}, publisher = {Edward Elgar Publishing}, address = {Cheltenham, UK}, isbn = {9781782547228}, year = {2017}, language = {en} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Small Claims Regulation}, series = {European Encyclopedia of Private International Law}, booktitle = {European Encyclopedia of Private International Law}, publisher = {Edward Elgar Publishing}, address = {Cheltenham, UK}, isbn = {9781782547228}, year = {2017}, language = {en} } @incollection{BarnatJaensch2019, author = {Barnat, Miriam and J{\"a}nsch, Vanessa K.}, title = {Forschendes Lernen und Studienerfolg: Die Bedeutung epistemischer Neugier}, series = {Forschendes Lernen in der Studieneingangsphase: Empirische Befunde, Fallbeispiele und individuelle Perspektiven}, booktitle = {Forschendes Lernen in der Studieneingangsphase: Empirische Befunde, Fallbeispiele und individuelle Perspektiven}, publisher = {Springer VS}, address = {Wiesbaden}, isbn = {978-3-658-25312-7}, doi = {10.1007/978-3-658-25312-7_6}, pages = {99 -- 109}, year = {2019}, abstract = {Forschendes Lernen ist dazu geeignet, epistemische Neugier - definiert als Freude an neuen Erkenntnissen - anzuregen und zu befriedigen. Neben der Selbstwirksamkeit zeigt sich die Neugier als relevant f{\"u}r den Studienerfolg. Allerdings ist bisher nicht gekl{\"a}rt, in welcher Beziehung diese beiden Konstrukte zueinanderstehen.}, language = {de} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Art. 5 Rom III-Regulation (choice of applicable law by the parties)}, series = {Rome Regulations : commentary}, booktitle = {Rome Regulations : commentary}, editor = {Calliess, Gralf-Peter}, edition = {2nd ed.}, publisher = {Wolters Kluwer}, isbn = {9789041147547}, year = {2015}, language = {en} } @incollection{CalliessKrollLudwigs2015, author = {Calliess, Gralf-Peter and Kroll-Ludwigs, Kathrin}, title = {Art. 6 Rome III-Regulation (consent and material validity)}, series = {Rome Regulations : commentary}, booktitle = {Rome Regulations : commentary}, publisher = {Wolters Kluwer}, isbn = {9789041147547}, year = {2015}, language = {en} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Art. 7 Rome III-Regulation (formal validity)}, series = {Rome Regulations : commentary}, booktitle = {Rome Regulations : commentary}, editor = {Colliess, Gralf-Peter}, edition = {2nd ed.}, publisher = {Wolters Kluwer}, isbn = {9789041147547}, year = {2015}, language = {en} } @incollection{RoethDeutskensKreiskoetheretal.2018, author = {R{\"o}th, Thilo and Deutskens, Christoph and Kreisk{\"o}ther, Kai and Heimes, Heiner Hans and Schittny, Bastian and Ivanescu, Sebastian and Kleine B{\"u}ning, Max and Reinders, Christian and Wessels, Saskia and Haunreiter, Andreas and Reisgen, Uwe and Thiele, Regina and Hameyer, Kay and Doncker, Rik W. de and Sauer, Uwe and Hoek, Hauke van and H{\"u}bner, Mareike and Hennen, Martin and Stolze, Thilo and Vetter, Andreas and Hagedorn, J{\"u}rgen and M{\"u}ller, Dirk and Rewitz, Kai and Wesseling, Mark and Flieger, Bj{\"o}rn}, title = {Entwicklung von elektrofahrzeugspezifischen Systemen}, series = {Elektromobilit{\"a}t}, booktitle = {Elektromobilit{\"a}t}, publisher = {Springer Vieweg}, address = {Berlin, Heidelberg}, isbn = {978-3-662-53137-2}, doi = {10.1007/978-3-662-53137-2_6}, pages = {279 -- 386}, year = {2018}, abstract = {Die Batterie ist eine der absolut zentralen Komponenten des Elektrofahrzeugs. Die serielle Entwicklung und Produktion dieser Batterien und die Verbesserung der Leistungen wird entscheidend f{\"u}r den Erfolg der Elektromobilit{\"a}t sein. Die Batterie ist jedoch nicht das einzige elektrofahrzeugspezifische System, das neu entwickelt, umkonzipiert oder verbessert werden muss. So sind ebenso die Entwicklung der neuen Fahrzeugstruktur sowie des elektrifizierten Antriebsstranges Teil dieses Kapitels. Weiterhin wird ein Blick auf das bedeutende Thema des Thermomanagements geworfen.}, language = {de} } @incollection{KlockeKatz2017, author = {Klocke, Martina and Katz, Christiane}, title = {Heterogenit{\"a}t von MINT-Studierenden als Herausforderung}, series = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern}, booktitle = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern}, publisher = {Technische Hochschule N{\"u}rnberg Georg Simon Ohm}, address = {N{\"u}rnberg}, pages = {31 -- 36}, year = {2017}, language = {de} } @incollection{Klocke2018, author = {Klocke, Martina}, title = {Schulter an Schulter - Zusammenarbeit in einem differenzierten Hochschulsystem}, series = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn}, booktitle = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn}, publisher = {Waxmann}, address = {M{\"u}nster}, isbn = {978-3-8309-3782-1}, pages = {75 -- 80}, year = {2018}, language = {de} } @incollection{KrollLudwigs2011, author = {Kroll-Ludwigs, Kathrin}, title = {Vor \S 1353 bis \S 1362 BGB (Allgemeine Ehewirkungen)}, series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, edition = {13., neu bearb. Aufl.}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {9783504471019}, year = {2011}, language = {de} } @incollection{KrollLudwigs2014, author = {Kroll-Ludwigs, Kathrin}, title = {Vorbemerkung vor \S 1353}, series = {Erman, B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug) , ErbbauRG, LPartG, ProdHaftG, VBVG, VersAus-glG und WEG}, booktitle = {Erman, B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug) , ErbbauRG, LPartG, ProdHaftG, VBVG, VersAus-glG und WEG}, editor = {Ermann, Walter, and Grunewald, Barbara and Maier-Reimer, Georg}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-50447-102-6}, year = {2014}, language = {de} } @incollection{KrollLudwigs2014, author = {Kroll-Ludwigs, Kathrin}, title = {Vorbemerkung vor \S 1297}, series = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, booktitle = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, editor = {Ermann, Walter and Grunewald, Barbara and Maier-Reimer, Georg}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-47102-6}, year = {2014}, language = {de} } @incollection{KrollLudwigs2014, author = {Kroll-Ludwigs, Kathrin}, title = {Einleitung vor \S 1297}, series = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, booktitle = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-47102-6}, year = {2014}, language = {de} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu EU-EheG{\"u}terVO-E}, series = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, booktitle = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, editor = {Rauscher, Thomas}, edition = {4., neu bearbeitete Auflage}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-38437-1}, doi = {10.9785/9783504384371-007}, pages = {1081 -- 1146}, year = {2015}, language = {de} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu EU-LP-G{\"u}terVO}, series = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, booktitle = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, editor = {Rauscher, Thomas}, edition = {4., neu bearbeitete Auflage}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-38437-1}, doi = {10.9785/9783504384371-008}, pages = {1147 -- 1188}, year = {2015}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu \S\S 1802 - 1834}, series = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, booktitle = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, editor = {Oetker, Hartmut and Rixecker, Roland and S{\"a}cker, J{\"u}rgen}, edition = {7. Auflage}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66548-6}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu \S\S 1837 - 1851}, series = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, booktitle = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, edition = {7. Auflage}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66548-6}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu \S\S 1852 - 1857a}, series = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, booktitle = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, edition = {7. Auflage}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66548-6}, year = {2017}, language = {de} } @incollection{RaoPathroseHueningetal.2019, author = {Rao, Deepak and Pathrose, Plato and H{\"u}ning, Felix and Sid, Jithin}, title = {An Approach for Validating Safety of Perception Software in Autonomous Driving Systems}, series = {Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16-18, 2019, Proceedings}, booktitle = {Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16-18, 2019, Proceedings}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-32872-6}, doi = {10.1007/978-3-030-32872-6_20}, pages = {303 -- 316}, year = {2019}, abstract = {The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon's DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.}, language = {en} } @incollection{MuellerJungSchmoelzer2015, author = {Mueller, Wolfram and Jung, Alexander and Schm{\"o}lzer, Bernhard}, title = {Der Einfluss der H{\"o}he {\"u}ber dem Meeresspiegel auf die Flugbahnen im Schispringen}, series = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin}, booktitle = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin}, editor = {Faulhaber, Martin and Schobersberger, Wolfgang and Schobersberger, Beatrix and Sumann, G{\"u}nther and Domej, Wolfgang}, publisher = {{\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin}, address = {Innsbruck}, isbn = {978-3-9501312-5-3}, pages = {173 -- 190}, year = {2015}, language = {de} } @incollection{ErnhardtDrummvanGogetal.2019, author = {Ernhardt, Selina and Drumm, Christian and van Gog, Tamara and Brand-Gruwel, Saskia and Jarodzka, Halszka}, title = {Through the eyes of a programmer : a research project on how to foster programming education with eye-tracking technology}, series = {Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen}, booktitle = {Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen}, publisher = {Mana-Buch}, address = {Heide}, isbn = {978-3-944330-62-4}, pages = {42 -- 47}, year = {2019}, language = {en} } @incollection{BorchertTenbrake2020, author = {Borchert, J{\"o}rg and Tenbrake, Andre}, title = {Bewirtschaftung von Flexibilit{\"a}t {\"u}ber Microservices eines Plattformanbieters}, series = {Realisierung Utility 4.0 Band 1}, booktitle = {Realisierung Utility 4.0 Band 1}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-25332-5}, doi = {10.1007/978-3-658-25332-5_37}, pages = {615 -- 626}, year = {2020}, abstract = {Die Energiewirtschaft befindet sich in einem starken Wandel, der v. a. durch die Energiewende und Digitalisierung Druck auf s{\"a}mtliche Marktteilnehmer aus{\"u}bt. Das klassische Gesch{\"a}ftsmodell des Energieversorgungsunternehmens ver{\"a}ndert sich dabei grundlegend. Der kontinuierlich ansteigende Einsatz dezentraler und volatiler Erzeugungsanlagen macht die Identifikation von Flexibilit{\"a}tspotenzialen notwendig, um weiterhin eine hohe Versorgungssicherheit zu gew{\"a}hrleisten. Dieser Schritt ist nur mit einem hohen Digitalisierungsgrad m{\"o}glich. Eine funktionale Plattform mit Microservices, die zu Gesch{\"a}ftsprozessen verbunden werden k{\"o}nnen, wird als M{\"o}glichkeit zur Aktivierung der Flexibilit{\"a}t und Digitalisierung der Energieversorgungsunternehmen im Folgenden vorgestellt.}, language = {de} } @incollection{FinkenbergerBaumeisterKoch2019, author = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian}, title = {Themen}, series = {Komplement und Verst{\"a}rker: zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, booktitle = {Komplement und Verst{\"a}rker: zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, publisher = {JOVIS Verlag}, address = {Berlin}, isbn = {978-3-86859-578-9}, pages = {50 -- 57}, year = {2019}, language = {de} } @incollection{FinkenbergerBaumeister2017, author = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria}, title = {Working in between : Die Stadt von der anderen Seite sehen : Where Urban Planning Meets Artistic Practice}, series = {New Stakeholders of Urban Change : A Question of Culture and Attitude?. - (Perspectives in Metropolitan Research ; IV)}, booktitle = {New Stakeholders of Urban Change : A Question of Culture and Attitude?. - (Perspectives in Metropolitan Research ; IV)}, editor = {Berger, Hilke Marit and Ziemer, Gesa}, publisher = {JOVIS Verlag}, address = {Berlin}, isbn = {978-3-86859-487-4}, pages = {119 -- 129}, year = {2017}, language = {de} } @incollection{Finkenberger2018, author = {Finkenberger, Isabel Maria}, title = {Schwellenreiten}, series = {Prozesse reflexiven Entwerfens : Entwerfen und Forschen in Architektur und Landschaft}, booktitle = {Prozesse reflexiven Entwerfens : Entwerfen und Forschen in Architektur und Landschaft}, editor = {Buchert, Margitta}, publisher = {JOVIS Verlag}, address = {Berlin}, isbn = {978-3-86859-558-1}, pages = {208 -- 226}, year = {2018}, language = {de} } @incollection{FiedlerHennMelcher2015, author = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin}, title = {ANPAK - Ein Anpassungskurs f{\"u}r Studienanf{\"a}nger in den Ingenieurwissenschaften}, series = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /}, booktitle = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /}, editor = {Morschheuser, Petra}, publisher = {Duale Hochschule Baden-W{\"u}rttemberg (DHBW)}, address = {Mosbach}, isbn = {978-3-943656-02-2}, pages = {90 -- 93}, year = {2015}, language = {de} } @incollection{FinkenbergerBaumeisterKoch2019, author = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian}, title = {Komplement und Verst{\"a}rker : Wandel durch neue Allianzen}, series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, publisher = {JOVIS Verlag}, address = {Berlin}, isbn = {978-3-86859-578-9}, pages = {10 -- 39}, year = {2019}, language = {de} } @incollection{FinkenbergerBaumeisterKoch2019, author = {Finkenberger, Isabel Maria and Baumeister, Eva-Maria and Koch, Christian}, title = {Komplement und Verst{\"a}rker : der Diskurs geht weiter}, series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, publisher = {JOVIS Verlag}, address = {Berlin}, isbn = {978-3-86859-578-9}, pages = {40 -- 49}, year = {2019}, language = {de} } @incollection{FinkenbergerHerbertMalornyetal.2019, author = {Finkenberger, Isabel Maria and Herbert, Saskia and Malorny, Thomas and Koch, Christian}, title = {Perforierte Wirklichkeit und m{\"o}gliche Zuk{\"u}nfte : ein Gespr{\"a}ch}, series = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, booktitle = {Komplement und Verst{\"a}rker : zum Verh{\"a}ltnis von Stadtplanung, k{\"u}nstlerischen Praktiken und Kulturinstitutionen}, publisher = {JOVIS Verlag}, address = {Berlin}, isbn = {978-3-86859-578-9}, pages = {108 -- 129}, year = {2019}, language = {de} } @incollection{AzatKerimkulovaMansurovetal.2020, author = {Azat, Seitkhan and Kerimkulova, Almagul R. and Mansurov, Zulkhair A. and Adekenov, Sergazy and Artmann, Gerhard}, title = {The Use of Fusicoccin as Anticancer Compound}, series = {Carbon Nanomaterials in Biomedicine and the Environment}, booktitle = {Carbon Nanomaterials in Biomedicine and the Environment}, publisher = {Jenny Stanford Publishing}, address = {New York}, isbn = {978-0-429-42864-7}, doi = {10.1201/9780429428647-8}, pages = {149 -- 172}, year = {2020}, abstract = {The problem of creation and use of sorption materials is of current interest for the practice of the modern medicine and agriculture. Practical importance is production of a biostimulant using a carbon sorbent for a significant increase in productivity, which is very relevant for the regions of Kazakhstan. It is known that a plant phytohormone—fusicoccin—in nanogram concentrations transforms cancer cells to the state of apoptosis. In this regard, there is a scientific practical interest in the development of a highly efficient method for producing fusicoccin from extract of germinated wheat seeds. According to the results of computer modeling, cleaning composite components of fusicoccin using microporous carbon adsorbents not suitable as the size of the molecule of fusicoccin more than micropores and the optimum pore size for purification of constituents of fusicoccin was determined by computer simulation.}, language = {en} } @incollection{MuellerAltherrAholaetal.2018, author = {M{\"u}ller, Tim M. and Altherr, Lena and Ahola, Marja and Schabel, Samuel and Pelz, Peter F.}, title = {Optimizing pressure screen systems in paper recycling: optimal system layout, component selection and operation}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-18499-5}, doi = {10.1007/978-3-030-18500-8_44}, pages = {355 -- 361}, year = {2018}, abstract = {Around 60\% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.}, language = {en} } @incollection{Kotliar2021, author = {Kotliar, Konstantin}, title = {Ocular rigidity: clinical approach}, series = {Ocular Rigidity, Biomechanics and Hydrodynamics of the Eye}, booktitle = {Ocular Rigidity, Biomechanics and Hydrodynamics of the Eye}, editor = {Pallikaris, I. and Tsilimbaris, M. K. and Dastiridou, A. I.}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-64422-2}, doi = {10.1007/978-3-030-64422-2_2}, pages = {15 -- 43}, year = {2021}, abstract = {The term ocular rigidity is widely used in clinical ophthalmology. Generally it is assumed as a resistance of the whole eyeball to mechanical deformation and relates to biomechanical properties of the eye and its tissues. Basic principles and formulas for clinical tonometry, tonography and pulsatile ocular blood flow measurements are based on the concept of ocular rigidity. There is evidence for altered ocular rigidity in aging, in several eye diseases and after eye surgery. Unfortunately, there is no consensual view on ocular rigidity: it used to make a quite different sense for different people but still the same name. Foremost there is no clear consent between biomechanical engineers and ophthalmologists on the concept. Moreover ocular rigidity is occasionally characterized using various parameters with their different physical dimensions. In contrast to engineering approach, clinical approach to ocular rigidity claims to characterize the total mechanical response of the eyeball to its deformation without any detailed considerations on eye morphology or material properties of its tissues. Further to the previous chapter this section aims to describe clinical approach to ocular rigidity from the perspective of an engineer in an attempt to straighten out this concept, to show its advantages, disadvantages and various applications.}, language = {en} } @incollection{JordanKatzPieper2021, author = {Jordan, Frank and Katz, Christiane and Pieper, Martin}, title = {Online-Kollaboration in der Mathematik: Ein Design-Based-Research-Projekt}, series = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen}, booktitle = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen}, publisher = {TH K{\"o}ln}, address = {K{\"o}ln}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:832-cos4-9465}, pages = {245 -- 261}, year = {2021}, abstract = {Die Studie er{\"o}rtert anhand eines Fallbeispiels aus der Mathematik f{\"u}r Ingenieur*innen, wie didaktische Gestaltungsprinzipien f{\"u}r Soziale Pr{\"a}senz, Kollaboration und das L{\"o}sen von praxisnahen Problemen mit mathematischem Denken in einer Online-Umgebung aussehen k{\"o}nnen. Hierf{\"u}r zieht der Beitrag den forschungsmethodologischen Rahmen Design-Based Research (DBR) hinzu und berichtet {\"u}ber Zwischenergebnisse. DBR wird an dieser Stelle als eine systematische Herangehensweise an kurzfristige Lehrver{\"a}nderungen und als Chance auf dem Weg zu einer neuen Hochschullehre nach der COVID-19-Pandemie dargestellt, die theoretische und empirische Erkenntnisse mit Praxisverkn{\"u}pfung und -relevanz vereint.}, language = {de} } @incollection{StengerAltherrMuelleretal.2018, author = {Stenger, David and Altherr, Lena and M{\"u}ller, Tankred and Pelz, Peter F.}, title = {Product family design optimization using model-based engineering techniques}, series = {Operations Research Proceedings 2017}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-89919-0}, doi = {10.1007/978-3-319-89920-6_66}, pages = {495 -- 502}, year = {2018}, abstract = {Highly competitive markets paired with tremendous production volumes demand particularly cost efficient products. The usage of common parts and modules across product families can potentially reduce production costs. Yet, increasing commonality typically results in overdesign of individual products. Multi domain virtual prototyping enables designers to evaluate costs and technical feasibility of different single product designs at reasonable computational effort in early design phases. However, savings by platform commonality are hard to quantify and require detailed knowledge of e.g. the production process and the supply chain. Therefore, we present and evaluate a multi-objective metamodel-based optimization algorithm which enables designers to explore the trade-off between high commonality and cost optimal design of single products.}, language = {en} } @incollection{AltherrDoerigEdereretal.2017, author = {Altherr, Lena and D{\"o}rig, Bastian and Ederer, Thorsten and Pelz, Peter Franz and Pfetsch, Marc and Wolf, Jan}, title = {A mixed-integer nonlinear program for the design of gearboxes}, series = {Operations Research Proceedings 2016}, booktitle = {Operations Research Proceedings 2016}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-55701-4}, doi = {10.1007/978-3-319-55702-1_31}, pages = {227 -- 233}, year = {2017}, abstract = {Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.}, language = {en} } @incollection{LeiseAltherrPelz2018, author = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.}, title = {Energy-Efficient design of a water supply system for skyscrapers by mixed-integer nonlinear programming}, series = {Operations Research Proceedings 2017}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-89919-0}, doi = {10.1007/978-3-319-89920-6_63}, year = {2018}, abstract = {The energy-efficiency of technical systems can be improved by a systematic design approach. Technical Operations Research (TOR) employs methods known from Operations Research to find a global optimal layout and operation strategy of technical systems. We show the practical usage of this approach by the systematic design of a decentralized water supply system for skyscrapers. All possible network options and operation strategies are modeled by a Mixed-Integer Nonlinear Program. We present the optimal system found by our approach and highlight the energy savings compared to a conventional system design.}, language = {en} } @incollection{AltherrEdererLorenzetal.2016, author = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp}, title = {Designing a feedback control system via mixed-integer programming}, series = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research}, booktitle = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research}, editor = {L{\"u}bbecke, Marco E. and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Preis, Britta and Walther, Grit}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-28695-2}, doi = {10.1007/978-3-319-28697-6_18}, pages = {121 -- 127}, year = {2016}, abstract = {Pure analytical or experimental methods can only find a control strategy for technical systems with a fixed setup. In former contributions we presented an approach that simultaneously finds the optimal topology and the optimal open-loop control of a system via Mixed Integer Linear Programming (MILP). In order to extend this approach by a closed-loop control we present a Mixed Integer Program for a time discretized tank level control. This model is the basis for an extension by combinatorial decisions and thus for the variation of the network topology. Furthermore, one is able to appraise feasible solutions using the global optimality gap.}, language = {en} } @incollection{Kurz2019, author = {Kurz, Melanie}, title = {Betrifft Design : von historischen Zukunftsperspektiven zu gegenw{\"a}rtigen Vergangenheitssehns{\"u}chten}, series = {Positionen des Neuen : Zukunft im Design}, booktitle = {Positionen des Neuen : Zukunft im Design}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-301-7}, pages = {136 -- 144}, year = {2019}, language = {de} } @incollection{Alt2022, author = {Alt, Helmut}, title = {Speicher speichern, Leiter leiten}, series = {Generationenprojekt Energiewende : Elektroenergiepolitik im Spannungsfeld zwischen Vision und Mission / Herbert Niederhausen (Hrsg.)}, booktitle = {Generationenprojekt Energiewende : Elektroenergiepolitik im Spannungsfeld zwischen Vision und Mission / Herbert Niederhausen (Hrsg.)}, publisher = {Books on Demand}, address = {Norderstedt}, isbn = {9783755774389}, pages = {125 -- 136}, year = {2022}, language = {de} }