@incollection{GonsiorHoffschmidt2008,
  author    = {Gonsior, Daniel and Hoffschmidt, Bernhard},
  title     = {Innovative Rußfilter f{\"u}r LKW-Dieselmotoren (Innotrap)},
  series = {Feinstaubforschung in Nordrhein-Westfalen. LANUV-Fachbericht. 9},
  booktitle = {Feinstaubforschung in Nordrhein-Westfalen. LANUV-Fachbericht. 9},
  publisher = {Landesamt f{\"u}r Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen},
  address   = {Recklinghausen},
  isbn      = {1864-3930},
  pages     = {13 -- 14},
  year      = {2008},
  language  = {de}
}
@incollection{KrokerHoffschmidtSchwarzeretal.2008,
  author    = {Kroker, Jan and Hoffschmidt, Bernhard and Schwarzer, Klemens and Sp{\"a}te, Frank},
  title     = {PTC 1000 modular parabolic trough collector},
  series = {Process heat collectors : state of the art within task 33/IV ; IEA SHC-Task 33 and SolarPACES-Task IV: Solar heat for industrial processes : F{\"o}rderkennzeichen BMBF 0329273A / Solar Heating and Cooling Executive Committee of the International Energy Agency (IEA) ; ed. Werner Weiss},
  booktitle = {Process heat collectors : state of the art within task 33/IV ; IEA SHC-Task 33 and SolarPACES-Task IV: Solar heat for industrial processes : F{\"o}rderkennzeichen BMBF 0329273A / Solar Heating and Cooling Executive Committee of the International Energy Agency (IEA) ; ed. Werner Weiss},
  publisher = {AEE INTEC},
  address   = {Gleisdorf},
  pages     = {45 -- 46},
  year      = {2008},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Required aerodynamic technologies},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_5},
  pages     = {69 -- 96},
  year      = {1997},
  abstract  = {In the preceeding chapters on "Son of Concorde, a Technology Challenge" and "Aerodynamic Multipoint Design Challenge" it was explained, that a well balanced contribution of new technologies in all major disciplines is required for realisation of a new Supersonic Commercial Transport (SCT). One of these technologies - usually one of the most important for aircraft-is aerodynamics. Here, the required "pure" aerodynamic technologies are specified in more detail, according to our present knowledge. Increasing insight into the problems may change the balance of importance of the individual technologies and may require some more contributions. We must never confine our knowledge to the knowledge base of an expert at a given time, but must stay open for new insights.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Certification of supersonic civil transports},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_6},
  pages     = {97 -- 103},
  year      = {1997},
  abstract  = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Supersonic laminar flow},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_18},
  pages     = {275 -- 290},
  year      = {1997},
  abstract  = {Supersonic transports are very drag sensitive. Technology to reduce drag by application of laminar flow, therefore, will be important; it is a prerequisite to achieve very long range capability. In earlier studies it was assumed that SCTs would only become possible by application of laminar flow [376]. But today, we request an SCT to be viable without application of laminar flow in order to maintain its competitiveness when laminar flow becomes available for subsonic and supersonic transports. By reducing fuel burned, laminar flow drag reduction reduces size and weight of the aircraft, or increases range capability -whereas otherwise size and weight would grow towards infinity. Transition mechanisms from laminar to turbulent state of the boundary layer flow (ALT, CFI, TSI) function as for transonic transports, but at more severe conditions: higher sweep angles, cooled surfaces; higher mode instabilities (HMI) must at least be taken into account, although they may not become important below Mach 3. Hitherto there is a worldwide lack of ground test facilities to investigate TSI at the expected cruise Mach numbers between 1.6 and 2.4; in Stuttgart, Germany one such facility -a Ludwieg tube- is still in the validation phase. A quiet Ludwieg tunnel could be a favourable choice for Europe. But it will require a new approach in designing aircraft which includes improved theoretical predictions, usage of classical wind tunnels for turbulent flow and flight tests for validation.},
  language  = {en}
}
@incollection{MertensBecker1989,
  author    = {Mertens, Josef and Becker, K.},
  title     = {Numerical solution of flow equations : an aircraft designer's view},
  series = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  booktitle = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  editor    = {Ballmann, Josef},
  publisher = {Vieweg},
  address   = {Braunschweig},
  isbn      = {3-528-08098-1},
  doi       = {10.1007/978-3-322-87869-4_41},
  pages     = {403 -- 412},
  year      = {1989},
  abstract  = {Today the most accurate and cost effective industrial codes used in aircraft design are based on the full potential equation coupled with boundary layer equations. However, these are not capable to solve complicated three-dimensional problems of vortical flows and shocks. On the other hand Euler and Navier-Stokes codes are too expensive and not accurate enough for design purposes, especially in regard of drag and interference prediction. The reasons for these deficiencies are investigated and a way to overcome them by future developments is demonstrated.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Son of Concorde, a technology challenge},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_3},
  pages     = {31 -- 51},
  year      = {1997},
  abstract  = {Concorde (Figure 9) is the only supersonic airliner which has been introduced into regular passenger service. It is still in service at British Airways and Air France without any flight accidents, and probably will stay in service for at least for ten more years.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Aerodynamic multi point design challenge},
  series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_4},
  pages     = {53 -- 67},
  year      = {1997},
  abstract  = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Reduction of aerodynamic drag (RaWid)-Status after the first year of the program},
  series = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  booktitle = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-06960-0},
  doi       = {10.1007/978-3-322-86573-1_2},
  pages     = {7 -- 14},
  year      = {1997},
  abstract  = {The technology programme "Reduction of aerodynamic drag (RaWid)" for high speed aerodynamics at Daimler-Benz Aerospace Airbus is sponsered by the German ministry for education, research and technology since July 1, 1995. Connected to this industrial programme are the cooperation programmes "MEGAFLOW" under leadership of the DLR and "Transition" by the DFG, and several contributions by DLR and universities. The programme is oriented towards technologies required for a MEGALINER which gains momentum by the ambitious plans for a new large Airbus A3XX. In the first year new technological steps were undertaken in theory, design and experiment. Some critical steps were verified by wing designs checked in wind tunnel tests.},
  language  = {en}
}
@incollection{Huening2012,
  author    = {H{\"u}ning, Felix},
  title     = {PowerMOSFETs f{\"u}r Elektromotoren im Automobil : Vom Fensterheber zum EPS},
  series = {Elektronik im Kraftfahrzeug : Innovationen bei Systemen und Komponenten ; mit 7 Tabellen},
  booktitle = {Elektronik im Kraftfahrzeug : Innovationen bei Systemen und Komponenten ; mit 7 Tabellen},
  editor    = {Schmitz, G{\"u}nter},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3110-2},
  pages     = {71 -- 81},
  year      = {2012},
  language  = {de}
}
@incollection{Doeren2008,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Schweißtechnische Verarbeitung nichtrostender St{\"a}hle},
  series = {Rostfreie St{\"a}hle. Grundwissen, Konstruktions- und Verarbeitungshinweise},
  booktitle = {Rostfreie St{\"a}hle. Grundwissen, Konstruktions- und Verarbeitungshinweise},
  editor    = {G{\"u}mpel, Paul},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-2689-4},
  pages     = {140 -- 174},
  year      = {2008},
  language  = {de}
}
@incollection{BuxbaumLangeRingbeck2009,
  author    = {Buxbaum, Bernd and Lange, Robert and Ringbeck, Thorsten},
  title     = {3D-Imaging},
  series = {Handbuch Fahrerassistenzsysteme : Grundlagen, Komponenten und Systeme f{\"u}r aktive Sicherheit und Komfort ; mit 45 Tabellen},
  booktitle = {Handbuch Fahrerassistenzsysteme : Grundlagen, Komponenten und Systeme f{\"u}r aktive Sicherheit und Komfort ; mit 45 Tabellen},
  editor    = {Winner, Hermann},
  edition   = {1. Auflage},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0287-3},
  pages     = {187 -- 197},
  year      = {2009},
  language  = {de}
}
@incollection{FunkeBoernerHendricketal.2011,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E.},
  title     = {Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine},
  series = {Progress in Propulsion Physics. Vol. 2},
  booktitle = {Progress in Propulsion Physics. Vol. 2},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  isbn      = {978-2-7598-0673-7},
  pages     = {475 -- 486},
  year      = {2011},
  language  = {en}
}
@incollection{RingbeckHagebeukerKraftetal.2007,
  author    = {Ringbeck, Thorsten and Hagebeuker, Bianca and Kraft, Holger and Paintner, Michael},
  title     = {PMD-basierte 3D-Optosensoren zur Fahrzeugumfelderfassung},
  series = {Sensoren im Automobil II : mit 27 Tabellen / [2. Tagung Sensoren im Automobil 2007]},
  booktitle = {Sensoren im Automobil II : mit 27 Tabellen / [2. Tagung Sensoren im Automobil 2007]},
  editor    = {Tille, Thomas},
  publisher = {expert-Verl.},
  address   = {Renningen},
  isbn      = {978-3-8169-2750-1},
  year      = {2007},
  language  = {de}
}
@incollection{Doeren1987,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Nichtrostende St{\"a}hle},
  series = {Jahrbuch Schweißtechnik. 1988},
  booktitle = {Jahrbuch Schweißtechnik. 1988},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {188 -- 203},
  year      = {1987},
  language  = {de}
}
@incollection{Doeren1990,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Das Schweißen von Austenit-Ferrit-Verbindungen},
  series = {Jahrbuch Schweißtechnik. 1991},
  booktitle = {Jahrbuch Schweißtechnik. 1991},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-725-0},
  pages     = {57 -- 63},
  year      = {1990},
  language  = {de}
}
@incollection{SchwarteHeinolBuxbaumetal.1999,
  author    = {Schwarte, Rudolf and Heinol, Horst-Guenther and Buxbaum, Bernd and Ringbeck, Thorsten and [u.a.],},
  title     = {Principles of three-dimensional imaging techniques},
  series = {Sensors and imaging. - (Handbook of computer vision and applications ; Vol. 1)},
  booktitle = {Sensors and imaging. - (Handbook of computer vision and applications ; Vol. 1)},
  editor    = {J{\"a}hne, Bernd},
  publisher = {Academic Press},
  address   = {San Diego},
  isbn      = {0-12-379771-3 (Einzelbd.)},
  pages     = {463 -- 485},
  year      = {1999},
  language  = {en}
}
@incollection{ClassenDoerenCodanietal.2000,
  author    = {Claßen, R. and D{\"o}ren, Horst-Peter and Codani, L. and Watermeyer, Klaus},
  title     = {Begleitende Untersuchungen beim L{\"o}ten mit vor{\"u}bergehend fl{\"u}ssiger Phase (TL PB) einschließlich Aktivkomponente an Verbindungen verschiedener Kupfer- und Kohlenstoffwerkstoffe (CFC).},
  series = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.},
  booktitle = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.},
  publisher = {Werkstoff-Informationsgesellschaft},
  address   = {Frankfurt},
  pages     = {97 -- 104},
  year      = {2000},
  language  = {de}
}
@incollection{AydinDoerenKuepper1996,
  author    = {Aydin, I. and D{\"o}ren, Horst-Peter and K{\"u}pper, H.},
  title     = {Plasma-Auftragschweißen mit Wolframschmelzkarbid-haltigen Metallpulvern und ihre Einsatzgebiete},
  series = {Thermische Spritzkonferenz = Thermal Spraying Conference. Erich Lugscheider [Hrsg.] DVS-Berichte 175},
  booktitle = {Thermische Spritzkonferenz = Thermal Spraying Conference. Erich Lugscheider [Hrsg.] DVS-Berichte 175},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-480-4},
  pages     = {137 -- 142},
  year      = {1996},
  language  = {de}
}
@incollection{DoerenPlaschkaPohl1987,
  author    = {D{\"o}ren, Horst-Peter and Plaschka, K. and Pohl, M.},
  title     = {Die Untersuchung von Schutzgasschweißdr{\"a}hten mit Hilfe des Rasterelektronenmikroskops},
  series = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18},
  booktitle = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18},
  publisher = {Riederer},
  address   = {Stuttgart},
  issn      = {0343-3579},
  pages     = {333 -- 345},
  year      = {1987},
  language  = {de}
}
@incollection{DoerenWernicke1985,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Einfluß der Schweißparameter beim Plasmaauftragschweißen mit Pulvern},
  series = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100},
  booktitle = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-405-7},
  pages     = {72 -- 76},
  year      = {1985},
  language  = {de}
}
@incollection{Raatschen2010,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {Von der K{\"o}niglichen H{\"o}heren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der FH Aachen},
  series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  publisher = {Klinkenberg},
  address   = {Aachen},
  isbn      = {978-3-941704-03-9},
  pages     = {13 -- 18},
  year      = {2010},
  subject      = {Geschichte},
  language  = {de}
}
@incollection{Raatschen2010,
  author    = {Raatschen, Hans-J{\"u}rgen},
  title     = {75 Jahre Vereinsgeschichte},
  series = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  booktitle = {Ingenieurfreunde FH Aachen : 75 Jahre F{\"o}rderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik},
  publisher = {Klinkenberg},
  address   = {Aachen},
  isbn      = {978-3-941704-03-9},
  pages     = {66 -- 72},
  year      = {2010},
  subject      = {Geschichte},
  language  = {de}
}
@incollection{ReisgenSchleserStieglitz2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja},
  title     = {Kleben in anspruchsvollen Anwendungsbereichen},
  series = {Jahrbuch Schweißtechnik 2011},
  booktitle = {Jahrbuch Schweißtechnik 2011},
  publisher = {DVS},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {226 -- 235},
  year      = {2010},
  language  = {de}
}
@incollection{HirtBleckBobzinetal.2011,
  author    = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and Schleser, Markus and [u.a.],},
  title     = {Hybride Produktionssysteme},
  series = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  booktitle = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-20692-4 (Print) ; 978-3-642-20693-1 (E-Book)},
  doi       = {10.1007/978-3-642-20693-1_5},
  pages     = {465 -- 745},
  year      = {2011},
  abstract  = {W{\"a}hrend die virtuelle Produktentstehungskette große Gestaltungsfreir{\"a}ume bietet, ist die reale Produktentstehungskette durch wesentlich mehr Randbedingungen gekennzeichnet, die nicht oder nur ansatzweise beeinflussbar sind. Die Realisierung des aus logistischer Sicht optimalen One-Piece-Flow bei gleichzeitiger Steigerung von Flexibilit{\"a}t und Produktivit{\"a}t sowie des Verschiebens der Grenze des technologisch Machbaren m{\"u}ssen in zuk{\"u}nftigen Forschungsans{\"a}tzen gleichermaßen betrachtet werden. Die Grenzverschiebung auf Basis der Integration von Technologien ist dabei ein viel versprechender Ansatz, der es in vielen F{\"a}llen erm{\"o}glicht, in allen genannten Zielrichtungen gleichermaßen Potentiale zu erschließen.},
  language  = {de}
}
@incollection{Naujokat2013,
  author    = {Naujokat, Anke},
  title     = {Schichtung, {\"U}berblendung, Collage. Formen und Bedeutungen architektonischer Simultaneit{\"a}t},
  series = {Simultaneit{\"a}t : Modelle der Gleichzeitigkeit in den Wissenschaften und K{\"u}nsten},
  booktitle = {Simultaneit{\"a}t : Modelle der Gleichzeitigkeit in den Wissenschaften und K{\"u}nsten},
  publisher = {transcript-Verlag},
  address   = {Bielefeld},
  isbn      = {978-3-8376-2261-4},
  pages     = {171 -- 190},
  year      = {2013},
  language  = {de}
}
@incollection{DiltheyBrandenburgSchleser2005,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Mikrokleben},
  series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-23706-8},
  pages     = {161 -- 172},
  year      = {2005},
  language  = {de}
}
@incollection{SchumacherSchwarzerStukenbrocketal.2009,
  author    = {Schumacher, Werner and Schwarzer, Klemens and Stukenbrock, Philipp and Rodriguez, Nadia},
  title     = {Entwicklung und Anwendungsgebiete solarthermischer Kraftwerke - Betriebsweise und Systemvarianten},
  series = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  booktitle = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  publisher = {Thom{\´e}-Kozmiensky Verlag},
  address   = {Neuruppin},
  isbn      = {978-3-935317-43-6},
  pages     = {401 -- 434},
  year      = {2009},
  language  = {de}
}
@incollection{KollSchwarzboezlHenneckeetal.2009,
  author    = {Koll, Gerritt and Schwarzb{\"o}zl, Peter and Hennecke, Klaus and Hoffschmidt, Bernhard and Hartz, Thomas},
  title     = {Solarthermisches Turmkraftwerk in J{\"u}lich},
  series = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  booktitle = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  publisher = {Thom{\´e}-Kozmiensky Verlag},
  address   = {Neuruppin},
  pages     = {455 -- 460},
  year      = {2009},
  language  = {de}
}
@incollection{Schleser2013,
  author    = {Schleser, Markus},
  title     = {F{\"u}gen f{\"u}r die Elektromobilit{\"a}t},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {65 -- 70},
  year      = {2013},
  language  = {de}
}
@incollection{OezdilBerndtHoecker1991,
  author    = {{\"O}zdil, S. and Berndt, Heinz and H{\"o}cker, Hartwig},
  title     = {Systematische Erfassung der Best{\"a}ndigkeit von Ryton-, P84- und Dralon ATF 1063-Fasern unter Einwirkung verschiedener NOx-Konzentrationen in einem definierten Temperaturintervall},
  series = {Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V.},
  booktitle = {Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V.},
  number    = {107},
  publisher = {Dt. Wollforschungsinstitut},
  address   = {Aachen},
  issn      = {0930-3723},
  pages     = {89 -- 129},
  year      = {1991},
  language  = {de}
}
@incollection{Goldbach2013,
  author    = {Goldbach, Daniel},
  title     = {Diagnosemaßnahmen in der funktionalen Sicherheit},
  series = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3221-5},
  pages     = {179 -- 198},
  year      = {2013},
  language  = {de}
}
@incollection{Goldbach2012,
  author    = {Goldbach, Daniel},
  title     = {Zuverl{\"a}ssigkeitsanalyse zur Verifikation der Einhaltung von quantitativen Sicherheitsanforderungen.},
  series = {Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz ; [anl{\"a}sslich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard B{\"a}ker ... (Hrsg.)},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz ; [anl{\"a}sslich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard B{\"a}ker ... (Hrsg.)},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3149-2},
  pages     = {116 -- 132},
  year      = {2012},
  language  = {de}
}
@incollection{AbelnDoeringFeldmannetal.2010,
  author    = {Abeln, Bj{\"o}rn and D{\"o}ring, Bernd and Feldmann, Markus and Geßler, Achim and M{\"o}ller, Sebastian and Paschen, Michael and Sedlacek, Gerhard},
  title     = {Entwicklungen zu Stahlfahrbahnen von Straßenbr{\"u}cken},
  series = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem Konstruktiven Ingenieurbau / Universit{\"a}t der Bundeswehr M{\"u}nchen ; 10/6)},
  booktitle = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem Konstruktiven Ingenieurbau / Universit{\"a}t der Bundeswehr M{\"u}nchen ; 10/6)},
  publisher = {Univ. der Bundeswehr},
  address   = {Neubiberg},
  pages     = {65 -- 76},
  year      = {2010},
  language  = {de}
}
@incollection{LanzlSeidovaDuehringetal.2009,
  author    = {Lanzl, I. and Seidova, S.-F. and D{\"u}hring, C. von and Kotliar, Konstantin},
  title     = {Befunde der dynamischen Gef{\"a}ßanalyse am Auge bei Gesunden und Glaukom-Patienten mit praxisrelevanter Bedeutung},
  series = {Mikrozirkulation beim Glaukom},
  booktitle = {Mikrozirkulation beim Glaukom},
  editor    = {Erb, Carl},
  publisher = {Elsevier},
  address   = {Amsterdam},
  pages     = {33 -- 39},
  year      = {2009},
  language  = {de}
}
@incollection{GoldbachHochrein2011,
  author    = {Goldbach, Daniel and Hochrein, Ulrich},
  title     = {Functional Safety Management und Analysemethoden in der Entwicklung eines sicherheitskritischen Systems im Automobil},
  series = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]},
  booktitle = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]},
  publisher = {Expert Verlag},
  address   = {Renningen},
  isbn      = {978-3-8169-3068-6},
  pages     = {175 -- 194},
  year      = {2011},
  language  = {de}
}
@incollection{Alt1971,
  author    = {Alt, Helmut},
  title     = {Fußball oder Mathematik},
  series = {Alma Mater Aquensis : Jahresbericht},
  booktitle = {Alma Mater Aquensis : Jahresbericht},
  pages     = {110 -- 114},
  year      = {1971},
  language  = {de}
}
@incollection{Alt1983,
  author    = {Alt, Helmut},
  title     = {Analog anzeigende Digitaluhr},
  series = {FH-Texte ; 36 : Berichte aus dem Fachbereich Elektrotechnik Aachen},
  booktitle = {FH-Texte ; 36 : Berichte aus dem Fachbereich Elektrotechnik Aachen},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  pages     = {98 -- 104},
  year      = {1983},
  language  = {de}
}
@incollection{Schmidt2014,
  author    = {Schmidt, Herbert},
  title     = {Angst vor Zukunft, Lust auf Zukunft},
  series = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen},
  booktitle = {Re|peat-Jahrbuch Treasury und Private Banking : Produkte, M{\"a}rkte und Strategien zum Nachschlagen und Verstehen},
  publisher = {Roland Eller},
  address   = {Potsdam},
  pages     = {255 -- 269},
  year      = {2014},
  language  = {de}
}
@incollection{KnocheKruskaWeberetal.2001,
  author    = {Knoche, K. F. and Kruska, Martin and Weber, P. and Kuperjans, Isabel},
  title     = {Energiemanagement},
  series = {Lexikon Nachhaltiges Wirtschaften. - (Lehr- und Handb{\"u}cher zur {\"o}kologischen Unternehmensf{\"u}hrung und Umwelt{\"o}konomie)},
  booktitle = {Lexikon Nachhaltiges Wirtschaften. - (Lehr- und Handb{\"u}cher zur {\"o}kologischen Unternehmensf{\"u}hrung und Umwelt{\"o}konomie)},
  editor    = {Schulz, Werner F.},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-486-24523-6},
  pages     = {88 -- 92},
  year      = {2001},
  language  = {de}
}
@incollection{MedlinBarkerBaumannetal.1994,
  author    = {Medlin, L. K. and Barker, G. L. A. and Baumann, Marcus and Hayes, P. K.},
  title     = {Molecular biology and systematics},
  series = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  booktitle = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-857772-9},
  pages     = {393 -- 411},
  year      = {1994},
  language  = {en}
}
@incollection{MandelartzTeschersSchumacher2003,
  author    = {Mandelartz, Johannes and Teschers, Reimar and Schumacher, Thomas},
  title     = {Aluminium-Einsatz im Verkehrssektor},
  series = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)},
  booktitle = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)},
  publisher = {Forschungszentrum J{\"u}lich},
  address   = {J{\"u}lich},
  isbn      = {3-89336-342-4},
  pages     = {7.1 -- 7.11},
  year      = {2003},
  language  = {de}
}
@incollection{TeschersMarkhoeferMandelartz2003,
  author    = {Teschers, Reimar and Markh{\"o}fer, J{\"o}rg and Mandelartz, Johannes},
  title     = {Die Aluminiumr{\"u}ckf{\"u}hrung aus dem Automobilbereich},
  series = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)},
  booktitle = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)},
  publisher = {Forschungszentrum J{\"u}lich},
  address   = {J{\"u}lich},
  isbn      = {3-89336-342-4},
  pages     = {7.1 -- 7.12},
  year      = {2003},
  language  = {de}
}
@incollection{Mandelartz2007,
  author    = {Mandelartz, Johannes},
  title     = {VDI-Richtlinien und Standards zu RFID},
  series = {RFID in der Instandhaltung. (Forum Vision Instandhaltung)},
  booktitle = {RFID in der Instandhaltung. (Forum Vision Instandhaltung)},
  publisher = {Verl. Praxiswissen},
  address   = {Dortmund},
  isbn      = {978-3-89957-061-8},
  pages     = {169 -- 179},
  year      = {2007},
  language  = {de}
}
@incollection{Schmidt2013,
  author    = {Schmidt, Herbert},
  title     = {Finanzierungspartnerwahl durch mittelst{\"a}ndische Unternehmen},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert ; Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {163 -- 166},
  year      = {2013},
  language  = {de}
}
@incollection{KruskaKuperjans1999,
  author    = {Kruska, Martin and Kuperjans, Isabel},
  title     = {An{\´a}lisis Thermodin{\´a}micos : [Cap{\´i}tulo 3.3]},
  series = {Uso racional de energ{\´i}a : eficiencia energ{\´e}tica y energ{\´i}as renovables. - (Manual para consultores y expertos)},
  booktitle = {Uso racional de energ{\´i}a : eficiencia energ{\´e}tica y energ{\´i}as renovables. - (Manual para consultores y expertos)},
  publisher = {Ministerio de Energ{\´i}a y Minas},
  address   = {Lima},
  pages     = {3.3-1 -- 3.3-15},
  year      = {1999},
  language  = {es}
}
@incollection{HoepnerSchminke2013,
  author    = {Hoepner, Gert and Schminke, Lutz H.},
  title     = {Dialog-Marketing - 2 in 1 - mehr als 3-fach erfolgreich},
  series = {Marketing in Forschung und Praxis : [Jubil{\"a}umsausgabe zum 40-j{\"a}hrigen Bestehen der Arbeitsgemeinschaft f{\"u}r Marketing] / hrsg. von G{\"u}nter Hofbauer ...},
  booktitle = {Marketing in Forschung und Praxis : [Jubil{\"a}umsausgabe zum 40-j{\"a}hrigen Bestehen der Arbeitsgemeinschaft f{\"u}r Marketing] / hrsg. von G{\"u}nter Hofbauer ...},
  publisher = {Uni-Ed.},
  address   = {Berlin},
  isbn      = {978-3-942171-98-4},
  pages     = {375 -- 396},
  year      = {2013},
  language  = {de}
}
@incollection{SchmitzWeber2007,
  author    = {Schmitz, Philipp and Weber, Martin},
  title     = {Setze nicht alles auf eine Karte, diversifiziere!},
  series = {Genial einfach investieren},
  booktitle = {Genial einfach investieren},
  publisher = {Campus-Verlag},
  address   = {Frankfurt a.M.},
  pages     = {104 -- 140},
  year      = {2007},
  language  = {de}
}
@incollection{Reichert2014,
  author    = {Reichert, Walter},
  title     = {Der Vertriebsingenieur: Ausbildung und Beruf},
  series = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker},
  booktitle = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker},
  publisher = {Resch},
  address   = {Großenkneten},
  pages     = {456 -- 458},
  year      = {2014},
  language  = {de}
}
@incollection{AugensteinGuerzenichKuperjansetal.2004,
  author    = {Augenstein, Eckardt and G{\"u}rzenich, D. and Kuperjans, Isabel and Wrobel, G.},
  title     = {TOP-Energy : softwaregest{\"u}tzte Analyse und Optimierung industrieller Energieversorgungssysteme},
  series = {Entwicklungslinien der Energietechnik 2004},
  booktitle = {Entwicklungslinien der Energietechnik 2004},
  edition   = {CD-ROM-Ausg.},
  publisher = {VDI},
  address   = {D{\"u}sseldorf},
  year      = {2004},
  language  = {de}
}