@incollection{Ulke2024, author = {Ulke, Bernd}, title = {Boden, Baugrube, Verbau}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, editor = {Krause, Thomas and Ulke, Bernd and Ferger, Martin}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-41329-3 (Print)}, doi = {10.1007/978-3-658-41330-9_9}, pages = {499 -- 658}, year = {2024}, abstract = {Die L{\"o}sung den Baugrund betreffender Fragestellungen beginnen i. d. R. mit der Durchf{\"u}hrung von Baugrunderkundungen, um alle notwendigen Parameter zu erhalten, die f{\"u}r die Planung und Durchf{\"u}hrung von Bauvorhaben notwendig sind. Im Folgenden werden die wichtigsten Erkundungen in Abh{\"a}ngigkeit der erforderlichen G{\"u}teklasse der Proben beschrieben und vorgestellt.}, language = {de} } @incollection{Ulke2019, author = {Ulke, Bernd}, title = {Boden, Baugrube, Verbau}, series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-23127-9 (Online)}, doi = {10.1007/978-3-658-23127-9_8}, pages = {165 -- 239}, year = {2019}, abstract = {Im folgenden Kapitel werden die wichtigsten geotechnischen Nachweise sowie praxisnahe Beispiele f{\"u}r den Baubetrieb aufgef{\"u}hrt. Es wird im Wesentlichen auf die Bodenbeschreibung und Klassifikation nach DIN 18196 sowie nach DIN 18300 eingegangen, welche sowohl f{\"u}r die weiteren Berechnungen als auch f{\"u}r die Kalkulation von großer Bedeutung sind. Die aus der Praxis aufgef{\"u}hrten Beispiele verdeutlichen verschiedene Untersuchungs- und Auswertungsmethoden f{\"u}r direkte und indirekte Aufschl{\"u}sse, diese enthalten Labor- und Feldversuche, mit denen man die Verdichtbarkeit von B{\"o}den auswertet und quantifiziert, sowie viele andere Themenbereiche wie Erddruckberechnungen sowie Spannungs- und Setzungsberechnungen. Dar{\"u}ber hinaus werden exemplarisch bestimmte Verbauarten bez{\"u}glich ihrer Bemessung erl{\"a}utert. Es wird ebenfalls auf das Thema Wasserhaltung eingegangen und die erforderlichen Maßnahmen beschrieben, um bestimmte Versagensmechanismen - wie z.B. den hydraulischen Grundbruch - zu verhindern.}, language = {de} } @incollection{Fabo2000, author = {Fabo, Sabine}, title = {Born to be wired : Anmerkungen zur Sichtbarkeit von Netzwerken}, series = {Artefakte Artefiktionen : Transformationsprozesse zeitgen{\"o}ssischer Literaturen, Medien, K{\"u}nste, Architekturen f{\"u}r Christian W. Thomsen zum 60. Geburtstag}, booktitle = {Artefakte Artefiktionen : Transformationsprozesse zeitgen{\"o}ssischer Literaturen, Medien, K{\"u}nste, Architekturen f{\"u}r Christian W. Thomsen zum 60. Geburtstag}, editor = {Krewani, Angela}, publisher = {Universit{\"a}tsverlag Winter}, address = {Heidelberg}, isbn = {3-8253-1076-0}, pages = {271 -- 281}, year = {2000}, language = {de} } @incollection{Krause2001, author = {Krause, Gregor}, title = {Brenchmarking elektrischer Energie in Zweckbauten - Aussagef{\"a}higkeit von Energiekennzahlen}, series = {Betriebliches Energiemanagement : Tagung Cottbus, 6. und 7. M{\"a}rz 2001. (VDI-Berichte ; 1593)}, booktitle = {Betriebliches Energiemanagement : Tagung Cottbus, 6. und 7. M{\"a}rz 2001. (VDI-Berichte ; 1593)}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {3180915935}, pages = {413 -- 422}, year = {2001}, language = {de} } @incollection{MelznerFerger2024, author = {Melzner, J{\"u}rgen and Ferger, Martin}, title = {Building Information Modeling}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, editor = {Krause, Thomas and Ulke, Bernd and Ferger, Martin}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-41329-3 (Print)}, doi = {10.1007/978-3-658-41330-9_15}, pages = {1051 -- 1073}, year = {2024}, abstract = {Durch die Einf{\"u}hrung von Building Information Modeling (BIM) sowohl projektspezifisch als auch in ganze Unternehmungen hat die Baubranche einen weitreichenden Ver{\"a}nderungsprozess angestoßen. Building Information Modeling kann als eine Methode angesehen werden, um die Informationsasymmetrien zwischen den Projektbeteiligten so gering wie m{\"o}glich zu halten.}, language = {de} } @incollection{DrummLemckeOberle2007, author = {Drumm, Christian and Lemcke, Jens and Oberle, Daniel}, title = {Business Process Management And Semantic Technologies}, series = {The Semantic Web}, booktitle = {The Semantic Web}, publisher = {Springer}, address = {Boston, MA}, isbn = {978-0-387-48531-7}, doi = {10.1007/978-0-387-48531-7_10}, pages = {207 -- 239}, year = {2007}, language = {en} } @incollection{Wollert2006, author = {Wollert, J{\"o}rg}, title = {Bussysteme}, series = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.}, booktitle = {Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-J{\"u}rgen Gevatter ... (Hrsg.). - 2. Aufl.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-21207-8 ; 978-3-540-21207-2}, pages = {475 -- 653}, year = {2006}, language = {de} } @incollection{KirchnerReisertSchoening2014, author = {Kirchner, Patrick and Reisert, Steffen and Sch{\"o}ning, Michael Josef}, title = {Calorimetric gas sensors for hydrogen peroxide monitoring in aseptic food processes}, series = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)}, booktitle = {Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)}, publisher = {Springer}, address = {Heidelberg}, isbn = {978-3-642-54518-4 (Print) ; 978-3-642-54519-1 (Online)}, doi = {10.1007/5346_2013_51}, pages = {279 -- 309}, year = {2014}, abstract = {For the sterilisation of aseptic food packages it is taken advantage of the microbicidal properties of hydrogen peroxide (H2O2). Especially, when applied in vapour phase, it has shown high potential of microbial inactivation. In addition, it offers a high environmental compatibility compared to other chemical sterilisation agents, as it decomposes into oxygen and water, respectively. Due to a lack in sensory detection possibilities, a continuous monitoring of the H2O2 concentration was recently not available. Instead, the sterilisation efficacy is validated using microbiological tests. However, progresses in the development of calorimetric gas sensors during the last 7 years have made it possible to monitor the H2O2 concentration during operation. This chapter deals with the fundamentals of calorimetric gas sensing with special focus on the detection of gaseous hydrogen peroxide. A sensor principle based on a calorimetric differential set-up is described. Special emphasis is given to the sensor design with respect to the operational requirements under field conditions. The state-of-the-art regarding a sensor set-up for the on-line monitoring and secondly, a miniaturised sensor for in-line monitoring are summarised. Furthermore, alternative detection methods and a novel multi-sensor system for the characterisation of aseptic sterilisation processes are described.}, language = {en} } @incollection{HinkeVervierBrauneretal.2022, author = {Hinke, Christian and Vervier, Luisa and Brauner, Philipp and Schneider, Sebastian and Steuer-Dankert, Linda and Ziefle, Martina and Leicht-Scholten, Carmen}, title = {Capability configuration in next generation manufacturing}, series = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models}, booktitle = {Forecasting next generation manufacturing : digital shadows, human-machine collaboration, and data-driven business models}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-07733-3}, doi = {10.1007/978-3-031-07734-0_6}, pages = {95 -- 106}, year = {2022}, abstract = {Industrial production systems are facing radical change in multiple dimensions. This change is caused by technological developments and the digital transformation of production, as well as the call for political and social change to facilitate a transformation toward sustainability. These changes affect both the capabilities of production systems and companies and the design of higher education and educational programs. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these concepts, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the capabilities dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we discuss the benefits of capturing expert knowledge and making it accessible to newcomers, especially in highly specialized industries. The experts argue that in order to cope with the challenges and circumstances of today's world, students must already during their education at university learn how to work with AI and other technologies. This means that study programs must change and that universities must adapt their structural aspects to meet the needs of the students.}, language = {en} } @incollection{WendorffEggertPohletal.2007, author = {Wendorff, Marion and Eggert, Thorsten and Pohl, Martina and Dresen, Carola and M{\"u}ller, Michael and Jaeger, Karl-Erich and Sprenger, Georg A. and Sch{\"u}rmann, Melanie and Sch{\"u}rmann, Martin and Johnen, Sandra and Sprenger, Gerda and Sahm, Hermann and Inoue, Tomoyuki and Sch{\"o}rken, Ulrich and Breittaupt, Holger and Fr{\"o}lich, Bettina and Heim, Petra and Iding, Hans and Juchem, Bettina and Siegert, Petra and Kula, Maria-Regina and Weckbecker, Andrea and Hummel, Werner and Fessner, Wolf-Dieter and Elling, Lothar and Wolberg, Michael and Bode, Silke and Feldmann, Ralf and Geilenkirchen, Petra and Schubert, Thomas and Walter, Lydia and D{\"u}nnwald, Thomas and Demir, Ayhan S. and Kolter-Jung, Doris and Nitsche, Adam and D{\"u}nkelmann, Pascal and Cosp, Annabel and Lingen, Bettina}, title = {Catalytic asymmetric synthesis : section 2.2}, series = {Asymmetric synthesis with chemical and biological methods / ed. by Dieter Enders ...}, booktitle = {Asymmetric synthesis with chemical and biological methods / ed. by Dieter Enders ...}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-527-31473-7}, pages = {298 -- 413}, year = {2007}, language = {en} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Certification of supersonic civil transports}, series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, editor = {Sobieczky, H.}, publisher = {Springer}, address = {Wien [u.a.]}, isbn = {3-2118-2815-X}, doi = {10.1007/978-3-7091-2658-5_6}, pages = {97 -- 103}, year = {1997}, abstract = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].}, language = {en} } @incollection{DigelSadykovTemizArtmannetal.2015, author = {Digel, Ilya and Sadykov, R. and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard}, title = {Changes in intestinal microflora in rats induced by oral exposure to low lead (II) concentrations}, series = {Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies}, booktitle = {Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies}, publisher = {Nova Science Publ.}, isbn = {9781634826990}, pages = {75 -- 99}, year = {2015}, language = {en} } @incollection{MufflerTippkoetterUlber2010, author = {Muffler, Kai and Tippk{\"o}tter, Nils and Ulber, Roland}, title = {Chemical feedstocks and fine chemicals from other substrates}, series = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)}, booktitle = {Handbook of hydrocarbon and lipid microbiology. Volume 4: Consequences of microbial interactions with hydrocarbons, oils and lipids. - (Springer reference)}, editor = {Timmis, Kenneth N.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-540-77588-1}, doi = {10.1007\%2F978-3-540-77587-4_214}, pages = {2891 -- 2902}, year = {2010}, language = {en} } @incollection{DachwaldUlamecBiele2013, author = {Dachwald, Bernd and Ulamec, Stephan and Biele, Jens}, title = {Clean in situ subsurface exploration of icy environments in the solar system}, series = {Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)}, booktitle = {Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-94-007-6545-0 (Druckausgabe)}, pages = {367 -- 397}, year = {2013}, abstract = {"To assess the habitability of the icy environments in the solar system, for example, on Mars, Europa, and Enceladus, the scientific analysis of material embedded in or underneath their ice layers is very important. We consider self-steering robotic ice melting probes to be the best method to cleanly access these environments, that is, in compliance with planetary protection standards. The required technologies are currently developed and tested."}, language = {en} } @incollection{GohTopcuMadabhushietal.2023, author = {Goh, Kheng Lim and Top{\c{c}}u, Murat and Madabhushi, Gopal S. P. and Staat, Manfred}, title = {Collagen fibril reinforcement in connective tissue extracellular matrices}, series = {Handbook of the extracellular matrix}, booktitle = {Handbook of the extracellular matrix}, editor = {Maia, Fatima Raquel Azevedo and Miguel Oliveira, J. and Reis, Rui L.}, publisher = {Springer Nature}, address = {Cham}, isbn = {978-3-030-92090-6 (Print)}, doi = {10.1007/978-3-030-92090-6_6-1}, pages = {1 -- 20}, year = {2023}, abstract = {The connective tissues such as tendons contain an extracellular matrix (ECM) comprising collagen fibrils scattered within the ground substance. These fibrils are instrumental in lending mechanical stability to tissues. Unfortunately, our understanding of how collagen fibrils reinforce the ECM remains limited, with no direct experimental evidence substantiating current theories. Earlier theoretical studies on collagen fibril reinforcement in the ECM have relied predominantly on the assumption of uniform cylindrical fibers, which is inadequate for modelling collagen fibrils, which possessed tapered ends. Recently, Top{\c{c}}u and colleagues published a paper in the International Journal of Solids and Structures, presenting a generalized shear-lag theory for the transfer of elastic stress between the matrix and fibers with tapered ends. This paper is a positive step towards comprehending the mechanics of the ECM and makes a valuable contribution to formulating a complete theory of collagen fibril reinforcement in the ECM.}, language = {en} } @incollection{BrittenBraunHesseetal.2003, author = {Britten, G. and Braun, Carsten and Hesse, M. and Ballmann, Josef}, title = {Computational aeroelasticity with reduced structural models}, series = {Flow modulation and fluid-structure interaction at airplane wings : research results of the Collaborative Research Center SFB 401 at RWTH Aachen, University of Technology, Aachen, Germany / Josef Ballmann (Ed.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 84}, booktitle = {Flow modulation and fluid-structure interaction at airplane wings : research results of the Collaborative Research Center SFB 401 at RWTH Aachen, University of Technology, Aachen, Germany / Josef Ballmann (Ed.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 84}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-40209-8}, pages = {275 -- 299}, year = {2003}, language = {en} } @incollection{BhattaraiFrotscherStaat2018, author = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred}, title = {Computational Analysis of Pelvic Floor Dysfunction}, series = {Women's Health and Biomechanics}, booktitle = {Women's Health and Biomechanics}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-71574-2}, doi = {10.1007/978-3-319-71574-2_17}, pages = {217 -- 230}, year = {2018}, abstract = {Pelvic floor dysfunction (PFD) is characterized by the failure of the levator ani (LA) muscle to maintain the pelvic hiatus, resulting in the descent of the pelvic organs below the pubococcygeal line. This chapter adopts the modified Humphrey material model to consider the effect of the muscle fiber on passive stretching of the LA muscle. The deformation of the LA muscle subjected to intra-abdominal pressure during Valsalva maneuver is compared with the magnetic resonance imaging (MRI) examination of a nulliparous female. Numerical result shows that the fiber-based Humphrey model simulates the muscle behavior better than isotropic constitutive models. Greater posterior movement of the LA muscle widens the levator hiatus due to lack of support from the anococcygeal ligament and the perineal structure as a consequence of birth-related injury and aging. Old and multiparous females with uncontrolled urogenital and rectal hiatus tend to develop PFDs such as prolapse and incontinence.}, language = {en} } @incollection{ReimerWellmerBraunetal.2009, author = {Reimer, Lars and Wellmer, Georg and Braun, Carsten and Ballmann, Josef}, title = {Computational methods for aero-structural analysis and optimisation of aircrafts based on reduced-order structural models}, series = {MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107}, booktitle = {MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-642-04092-4}, pages = {135 -- 150}, year = {2009}, abstract = {In this part of the MEGADESIGN project, aeroelastic effects are introduced into the aerodynamic analysis of aircrafts by coupling DLR's flow solvers TAU and FLOWer to a Timoshenko-beam solver. The emerging aeroelastic solvers and a method for the automatic identification of Timoshenko-beam models for wing-box structures were integrated into a simulation environment enabling the combined optimisation of aerodynamic wing shape and structure.}, language = {en} } @incollection{ReimerBraunBallmann2007, author = {Reimer, Lars and Braun, Carsten and Ballmann, Josef}, title = {Computational study of the aeroelastic equilibrium configuration of a swept wind tunnel wing model in subsonic flow}, series = {High performance computing in science and engineering '06. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2006 / Wolfgang E. Nagel ... Eds.}, booktitle = {High performance computing in science and engineering '06. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2006 / Wolfgang E. Nagel ... Eds.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-540-36165-7}, pages = {421 -- 434}, year = {2007}, abstract = {In the Collaborative Research Center SFB 401 at RWTH Aachen University, the numerical aeroelastic method SOFIA for direct numerical aeroelastic simulation is being progressively developed. Numerical results obtained by applying SOFIA were compared with measured data of static and dynamic aeroelastic wind tunnel tests for an elastic swept wing in subsonic flow.}, language = {en} } @incollection{HoffschmidtAlexopoulosRauetal.2012, author = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, P. and Hilger, Patrick}, title = {Concentrating solar power}, series = {Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications}, volume = {3}, booktitle = {Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-08-087872-0}, doi = {10.1016/B978-0-08-087872-0.00319-X}, pages = {595 -- 636}, year = {2012}, language = {en} } @incollection{HoffschmidtAlexopoulosRauetal.2021, author = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Caminos, R.A. Chico and Rend{\´o}n, C. and Hilger, P.}, title = {Concentrating Solar Power}, series = {Earth systems and environmental sciences}, booktitle = {Earth systems and environmental sciences}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-12-409548-9}, doi = {10.1016/B978-0-12-819727-1.00089-3}, year = {2021}, abstract = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.}, language = {en} } @incollection{HoffschmidtAlexopoulosRauetal.2022, author = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes, Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Chico Caminos, R.A. and Rend{\´o}n, C. and Hilger, P.}, title = {Concentrating solar power}, series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications}, booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-12-819734-9}, pages = {670 -- 724}, year = {2022}, abstract = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.}, language = {en} } @incollection{DuffnerUibelPetersonetal.2023, author = {Duffner, Markus and Uibel, Thomas and Peterson, Leif Arne and Moorkamp, Wilfried}, title = {Cross Layers Light - Ein ressourceneffizientes und recyclebares Holz-Wandsystem}, series = {Bauphysik Kalender 2023: Nachhaltigkeit}, booktitle = {Bauphysik Kalender 2023: Nachhaltigkeit}, editor = {Fouad, Nabil A.}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {9783433033890 (Print)}, doi = {10.1002/9783433611289.ch13}, pages = {483 -- 501}, year = {2023}, abstract = {Ein neues tragendes, lagenweise aufgebautes Holzbau-Wandsystem und seine {\"o}konomische und statische Entwicklung werden vorgestellt. Randbedingungen wie Nachhaltigkeit, Ressourceneffizienz und eine beanspruchungsadaptive Konstruktionsweise sind f{\"u}r diese innovative Bauteilentwicklung von zentraler Bedeutung. Eine wesentliche Herausforderung ist die Herstellung der Verbindung der Lagen untereinander zu einem bauphysikalisch und statisch leistungsf{\"a}higen Wandsystem. Die Tragf{\"a}higkeit und Steifigkeit verschiedener Verbindungsvarianten wurden ebenso wie die Eigenschaften der Wandelemente analytisch, numerisch und experimentell untersucht.}, language = {de} } @incollection{NiemuellerZwillingLakemeyeretal.2017, author = {Niemueller, Tim and Zwilling, Frederik and Lakemeyer, Gerhard and L{\"o}bach, Matthias and Reuter, Sebastian and Jeschke, Sabina and Ferrein, Alexander}, title = {Cyber-Physical System Intelligence}, series = {Industrial Internet of Things}, booktitle = {Industrial Internet of Things}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-42559-7}, doi = {10.1007/978-3-319-42559-7_17}, pages = {447 -- 472}, year = {2017}, abstract = {Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.}, language = {en} } @incollection{SchubaHoefken2022, author = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm}, title = {Cybersicherheit in Produktion, Automotive und intelligenten Geb{\"a}uden}, series = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen}, booktitle = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen}, publisher = {Carl Hanser Verlag}, address = {M{\"u}nchen}, isbn = {978-3-446-47223-5}, doi = {10.3139/9783446473478.012}, pages = {193 -- 218}, year = {2022}, language = {de} } @incollection{Fabo2017, author = {Fabo, Sabine}, title = {Das Dokumentarische als offene Konstruktion}, series = {Doris Frohnapfel, Documentary derivative}, booktitle = {Doris Frohnapfel, Documentary derivative}, publisher = {Totalverlag}, address = {K{\"o}ln}, isbn = {978-3-942040-03-7}, pages = {5 -- 23}, year = {2017}, language = {de} } @incollection{Doeren1990, author = {D{\"o}ren, Horst-Peter}, title = {Das Schweißen von Austenit-Ferrit-Verbindungen}, series = {Jahrbuch Schweißtechnik. 1991}, booktitle = {Jahrbuch Schweißtechnik. 1991}, publisher = {DVS-Verlag}, address = {D{\"u}sseldorf}, isbn = {3-87155-725-0}, pages = {57 -- 63}, year = {1990}, language = {de} } @incollection{NiemuellerReuterEwertetal.2015, author = {Niemueller, Tim and Reuter, Sebastian and Ewert, Daniel and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {Decisive Factors for the Success of the Carologistics RoboCup Team in the RoboCup Logistics League 2014}, series = {RoboCup 2014: Robot World Cup XVIII}, booktitle = {RoboCup 2014: Robot World Cup XVIII}, publisher = {Springer}, isbn = {978-3-319-18615-3}, pages = {155 -- 167}, year = {2015}, language = {en} } @incollection{BorchertHintze2009, author = {Borchert, J{\"o}rg and Hintze, D.}, title = {Der Aufbau von Handelseinheiten}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {2. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-58373-5}, pages = {393 -- 410}, year = {2009}, language = {de} } @incollection{Ulke2019, author = {Ulke, Bernd}, title = {Der baurechtliche Vertrag}, series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-23127-9}, pages = {63 -- 87}, year = {2019}, abstract = {Anhand von kurzen theoretischen Einf{\"u}hrungen werden anhand von Beispielen die wesentlichen Aspekte des baurechtlichen Vertrages erl{\"a}utert. Nach einer Einf{\"u}hrung {\"u}ber das Zustandekommen von (Bau-) Vertr{\"a}gen wird die f{\"u}r Streitf{\"a}lle unerl{\"a}ssliche Dokumentation auf Baustellen erl{\"a}utert. Hierbei werden Hinweise zur Erstellung von Protokollen, zum E-Mail bei Großprojekten und zur Dokumentation von Stundenlohnarbeiten gegeben. Des Weiteren wird eine Schriftverkehrsliste vorgestellt, die zur Nachverfolgung des Schriftverkehrs bei Großprojekten unerl{\"a}sslich ist. Anschließend werden die typischen Vertragsarten vorgestellt, die bei der Abwicklung von Großprojekten zu beachten sind und die Unterschiede werden durch Fallbeispiele erl{\"a}utert. Einen Schwerpunkt des Kapitels bilden auftragsnehmerseitige Verz{\"u}ge sowie mangelbehaftete Leistungen. Hier werden Hinweise gegeben, wie in den entsprechenden Situationen zu reagieren ist.}, language = {de} } @incollection{MuellerJungSchmoelzer2015, author = {Mueller, Wolfram and Jung, Alexander and Schm{\"o}lzer, Bernhard}, title = {Der Einfluss der H{\"o}he {\"u}ber dem Meeresspiegel auf die Flugbahnen im Schispringen}, series = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin}, booktitle = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin}, editor = {Faulhaber, Martin and Schobersberger, Wolfgang and Schobersberger, Beatrix and Sumann, G{\"u}nther and Domej, Wolfgang}, publisher = {{\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin}, address = {Innsbruck}, isbn = {978-3-9501312-5-3}, pages = {173 -- 190}, year = {2015}, language = {de} } @incollection{Borchert1997, author = {Borchert, J{\"o}rg}, title = {Der Elektrizit{\"a}tsmarkt in Indonesien und Beteiligungsm{\"o}glichkeiten privater Unternehmen}, series = {Investitionsf{\"u}hrer ASEAN, Indochina, 1997 : Brunei, Indonesien, Kambodscha, Laos, Malaysia, Myanmar, Philippinen, Singapur, Thailand, Vietnam}, booktitle = {Investitionsf{\"u}hrer ASEAN, Indochina, 1997 : Brunei, Indonesien, Kambodscha, Laos, Malaysia, Myanmar, Philippinen, Singapur, Thailand, Vietnam}, edition = {Stand: Mai 1997}, publisher = {Berliner Bank AG}, address = {Berlin}, pages = {42 -- 52}, year = {1997}, language = {de} } @incollection{BlachianFissabre2002, author = {Blachian, Marion and Fissabre, Anke}, title = {Der Hof Dorfstraße 32 in Kaulsdorf : Bauforschung und Dorfgeschichte}, series = {Die Denkmale in Berlin : Bezirk Marzahn-Hellersdorf : Ortsteile Kaulsdorf, Mahlsdorf und Hellersdorf}, booktitle = {Die Denkmale in Berlin : Bezirk Marzahn-Hellersdorf : Ortsteile Kaulsdorf, Mahlsdorf und Hellersdorf}, publisher = {Lukas-Verlag}, address = {Berlin}, isbn = {3-931836-73-8}, pages = {102 -- 107}, year = {2002}, language = {de} } @incollection{StangelMesekeHahnSteuerDankert2015, author = {Stangel-Meseke, Martina and Hahn, Pia and Steuer-Dankert, Linda}, title = {Der Individualisierungs-Trend pr{\"a}gt die Unternehmenszukunft}, series = {Diversity Management und Individualisierung}, booktitle = {Diversity Management und Individualisierung}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-07484-5}, doi = {10.1007/978-3-658-07485-2_1}, pages = {1 -- 3}, year = {2015}, abstract = {Laut Zukunftsinstitut (2010) stellt die Individualisierung eine langfristige und nachhaltige Ver{\"a}nderung dar, die die gesamte Gesellschaft (den einzelnen Menschen, Unternehmen, den Staat) betrifft und Auswirkungen auf nahezu alle Lebensbereiche (z. B. Arbeit, Wohnen, Partnerschaft) hat. Die Individualisierung beschreibt dabei die Entwicklung hin zur Fokussierung pers{\"o}nlicher Interessen und Lebensentscheidungen der einzelnen Person (Kunze, Individualisierung, 2011). Der Grund f{\"u}r diese Entwicklung sind laut Kunze (Individualisierung, 2011) Treiber wie steigendes Verm{\"o}gen, Bildung und Mobilit{\"a}t, was die einzelne Person unabh{\"a}ngiger von gr{\"o}ßeren Gemeinschaften macht und mehr Freiheit zur Selbstverwirklichung bietet. Als eine Konsequenz daraus werden Wertevorstellungen nicht mehr einfach hingenommen, sondern f{\"u}r die eigene Person {\"u}berpr{\"u}ft und individualisiert (Kunze, Individualisierung, 2011). So wies Beck bereits 1996 darauf hin, dass Individualisierung meint „erstens die Aufl{\"o}sung und zweitens die Abl{\"o}sung industriegesellschaftlicher Lebensformen durch andere, in denen die Einzelnen ihre Biographie selbst herstellen, inszenieren, zusammenflickschustern m{\"u}ssen" (Beck, Die Erfindung des Politischen, 1996, S. 150).}, language = {de} } @incollection{Reichert2014, author = {Reichert, Walter}, title = {Der Vertriebsingenieur: Ausbildung und Beruf}, series = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker}, booktitle = {Berufsstart Technik : das Karriereportal f{\"u}r junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker}, publisher = {Resch}, address = {Großenkneten}, pages = {456 -- 458}, year = {2014}, language = {de} } @incollection{AltherrEdererLorenzetal.2016, author = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp}, title = {Designing a feedback control system via mixed-integer programming}, series = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research}, booktitle = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research}, editor = {L{\"u}bbecke, Marco E. and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Preis, Britta and Walther, Grit}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-28695-2}, doi = {10.1007/978-3-319-28697-6_18}, pages = {121 -- 127}, year = {2016}, abstract = {Pure analytical or experimental methods can only find a control strategy for technical systems with a fixed setup. In former contributions we presented an approach that simultaneously finds the optimal topology and the optimal open-loop control of a system via Mixed Integer Linear Programming (MILP). In order to extend this approach by a closed-loop control we present a Mixed Integer Program for a time discretized tank level control. This model is the basis for an extension by combinatorial decisions and thus for the variation of the network topology. Furthermore, one is able to appraise feasible solutions using the global optimality gap.}, language = {en} } @incollection{ReimerBraunWellmeretal.2010, author = {Reimer, Lars and Braun, Carsten and Wellmer, Georg and Behr, Marek and Ballmann, Josef}, title = {Development of a modular method for computational aero-structural analysis of aircraft}, series = {Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schr{\"o}der. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109}, booktitle = {Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schr{\"o}der. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-642-04087-0}, pages = {205 -- 238}, year = {2010}, language = {en} } @incollection{Goldbach2013, author = {Goldbach, Daniel}, title = {Diagnosemaßnahmen in der funktionalen Sicherheit}, series = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)}, booktitle = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-3221-5}, pages = {179 -- 198}, year = {2013}, language = {de} } @incollection{HoepnerSchminke2013, author = {Hoepner, Gert and Schminke, Lutz H.}, title = {Dialog-Marketing - 2 in 1 - mehr als 3-fach erfolgreich}, series = {Marketing in Forschung und Praxis : [Jubil{\"a}umsausgabe zum 40-j{\"a}hrigen Bestehen der Arbeitsgemeinschaft f{\"u}r Marketing] / hrsg. von G{\"u}nter Hofbauer ...}, booktitle = {Marketing in Forschung und Praxis : [Jubil{\"a}umsausgabe zum 40-j{\"a}hrigen Bestehen der Arbeitsgemeinschaft f{\"u}r Marketing] / hrsg. von G{\"u}nter Hofbauer ...}, publisher = {Uni-Ed.}, address = {Berlin}, isbn = {978-3-942171-98-4}, pages = {375 -- 396}, year = {2013}, language = {de} } @incollection{SaldenFischerBarnat2016, author = {Salden, Peter and Fischer, Kathrin and Barnat, Miriam}, title = {Didaktische Studiengangentwicklung: Rahmenkonzepte und Praxisbeispiel}, series = {P{\"a}dagogische Hochschulentwicklung. Von der Programmierung zur Implementierung}, booktitle = {P{\"a}dagogische Hochschulentwicklung. Von der Programmierung zur Implementierung}, publisher = {Springer VS}, address = {Wiesbaden}, isbn = {978-3-658-12067-2}, doi = {10.1007/978-3-658-12067-2_9}, pages = {133 -- 149}, year = {2016}, abstract = {Die Studiengangentwicklung ist ein komplexer Prozess, in dem strukturelle Vorgaben beachtet, viele unterschiedliche Akteure/-innen einbezogen und nicht zuletzt angemessene didaktische L{\"o}sungen zum Erreichen der angestrebten Lernergebnisse gefunden werden m{\"u}ssen. Der vorliegende Text nimmt besonders den letzten Punkt in den Blick: Er zeigt, wie Studiengangentwicklung zu einem Thema der (Hochschul-)Didaktik geworden ist und wie sich der didaktische Ansatz von struktur- und prozessorientierten Ans{\"a}tzen unterscheidet, aber auch, wie er mit diesen zusammenh{\"a}ngt. An einem Beispiel aus dem Wirtschaftsingenieurwesen wird veranschaulicht, was didaktische Studiengangentwicklung in der Praxis ausmacht und wie eine konkrete Implementierung verlaufen kann. Auf dieser Grundlage wird abschließend ein erweitertes Modell der didaktischen Studiengangentwicklung vorgeschlagen.}, language = {de} } @incollection{TeschersMarkhoeferMandelartz2003, author = {Teschers, Reimar and Markh{\"o}fer, J{\"o}rg and Mandelartz, Johannes}, title = {Die Aluminiumr{\"u}ckf{\"u}hrung aus dem Automobilbereich}, series = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)}, booktitle = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)}, publisher = {Forschungszentrum J{\"u}lich}, address = {J{\"u}lich}, isbn = {3-89336-342-4}, pages = {7.1 -- 7.12}, year = {2003}, language = {de} } @incollection{Fissabre2022, author = {Fissabre, Anke}, title = {Die Bauten des j{\"u}dischen Friedhofs an der L{\"u}tticher Straße}, series = {Der J{\"u}dische Friedhof Aachen}, booktitle = {Der J{\"u}dische Friedhof Aachen}, editor = {Dux, Holger A.}, publisher = {Mayersche Buchhandlung Aachen GmbH}, address = {Aachen}, isbn = {978-3-87519-266-7}, pages = {51 -- 69}, year = {2022}, language = {de} } @incollection{Fabo2012, author = {Fabo, Sabine}, title = {Die Kunst der Irritation und ihr Mehrwert}, series = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien}, booktitle = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien}, publisher = {Transcript Verlag}, address = {Bielefeld}, isbn = {978-3-8376-2170-9}, pages = {112 -- 145}, year = {2012}, language = {de} } @incollection{Fabo2004, author = {Fabo, Sabine}, title = {Die Museumsinsel und die neuen Medien}, series = {Einf{\"u}hrung in die Kunstwissenschaft}, booktitle = {Einf{\"u}hrung in die Kunstwissenschaft}, editor = {K{\"o}stler, Andreas and Hensel, Thomas}, publisher = {Reimer}, address = {Berlin}, isbn = {3-496-01271-4}, pages = {45 -- 60}, year = {2004}, language = {de} } @incollection{LindemannKlein1997, author = {Lindemann, Markus and Klein, Stefan}, title = {Die Nutzung von Internet-Diensten im Rahmen des Elektronischen Datenaustauschs - Architekturvarianten und ein Anwendungsszenario}, series = {Wirtschaftsinformatik '97 - Internationale Gesch{\"a}ftst{\"a}tigkeit auf der Basis flexibler Organisationsstrukturen und leistungsf{\"a}higer Informationssysteme / Hermann Krallmann (Hrsg.)}, booktitle = {Wirtschaftsinformatik '97 - Internationale Gesch{\"a}ftst{\"a}tigkeit auf der Basis flexibler Organisationsstrukturen und leistungsf{\"a}higer Informationssysteme / Hermann Krallmann (Hrsg.)}, publisher = {Physica-Verlag}, address = {Heidelberg}, isbn = {3-7908-0999-3}, pages = {513 -- 531}, year = {1997}, language = {de} } @incollection{Finkenberger2018, author = {Finkenberger, Isabel Maria}, title = {Die Stadt als st{\"a}dtisch-theatrale Versuchsanordnung: Wie wollen wir in Zukunft leben und welche Stadt brauchen wir daf{\"u}r?}, series = {Un/Certain Futures - Rollen des Designs in gesellschaftlichen Transformationsprozessen}, booktitle = {Un/Certain Futures - Rollen des Designs in gesellschaftlichen Transformationsprozessen}, publisher = {transcript}, address = {Bielefeld}, isbn = {9783839443323}, doi = {https://doi.org/10.1515/9783839443323-009}, pages = {86 -- 95}, year = {2018}, language = {de} } @incollection{Blome2013, author = {Blome, Hans-Joachim}, title = {Die Tragweite der physikalischen Kosmologie}, series = {Exploring Uncertainty}, booktitle = {Exploring Uncertainty}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3-658-00897-0}, doi = {10.1007/978-3-658-00897-0_6}, pages = {105 -- 150}, year = {2013}, language = {de} } @incollection{DoerenPlaschkaPohl1987, author = {D{\"o}ren, Horst-Peter and Plaschka, K. and Pohl, M.}, title = {Die Untersuchung von Schutzgasschweißdr{\"a}hten mit Hilfe des Rasterelektronenmikroskops}, series = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18}, booktitle = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18}, publisher = {Riederer}, address = {Stuttgart}, issn = {0343-3579}, pages = {333 -- 345}, year = {1987}, language = {de} } @incollection{BensbergBuscherCzarnecki2019, author = {Bensberg, Frank and Buscher, Gandalf and Czarnecki, Christian}, title = {Digital transformation and IT topics in the consulting industry: a labor market perspective}, series = {Advances in consulting research : recent findings and practical cases}, booktitle = {Advances in consulting research : recent findings and practical cases}, editor = {Nissen, Volker}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-95998-6}, doi = {10.1007/978-3-319-95999-3_16}, pages = {341 -- 357}, year = {2019}, abstract = {Information technologies, such as big data analytics, cloud computing, cyber physical systems, robotic process automation, and the internet of things, provide a sustainable impetus for the structural development of business sectors as well as the digitalization of markets, enterprises, and processes. Within the consulting industry, the proliferation of these technologies opened up the new segment of digital transformation, which focuses on setting up, controlling, and implementing projects for enterprises from a broad range of sectors. These recent developments raise the question, which requirements evolve for IT consultants as important success factors of those digital transformation projects. Therefore, this empirical contribution provides indications regarding the qualifications and competences necessary for IT consultants in the era of digital transformation from a labor market perspective. On the one hand, this knowledge base is interesting for the academic education of consultants, since it supports a market-oriented design of adequate training measures. On the other hand, insights into the competence requirements for consultants are considered relevant for skill and talent management processes in consulting practice. Assuming that consulting companies pursue a strategic human resource management approach, labor market information may also be useful to discover strategic behavioral patterns.}, language = {en} } @incollection{AuthCzarneckiBensbergetal.2019, author = {Auth, Gunnar and Czarnecki, Christian and Bensberg, Frank and Thor, Andreas}, title = {Digitalisierung des Forschungsprozesses aus Sicht von Forschenden - durch Serviceintegration zum pers{\"o}nlichen Forschungsinformationssystem}, series = {Hochschulen in Zeiten der Digitalisierung : Lehre, Forschung und Organisation}, booktitle = {Hochschulen in Zeiten der Digitalisierung : Lehre, Forschung und Organisation}, editor = {Barton, Thomas and M{\"u}ller, Christian and Seel, Christian}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-26617-2 (Print)}, doi = {10.1007/978-3-658-26618-9_17}, pages = {287 -- 307}, year = {2019}, abstract = {In der Diskussion {\"u}ber die Digitalisierung der Forschung spielt die Frage nach der optimalen IT-Unterst{\"u}tzung f{\"u}r Forschende eine wichtige Rolle. Forschende k{\"o}nnen heute an ihren Hochschulen bzw. Wissenschaftseinrichtungen auf ein breites Angebot interner IT-Dienstleistungen zur{\"u}ckgreifen, das auch kooperative IT-Dienste umfasst, die von mehreren Institutionen in Zusammenarbeit bereitgestellt werden. Außerhalb der eigenen Organisation und des weiteren Verbunds hat sich im Internet zudem ein breites externes Angebot an innovativen, h{\"a}ufig kostenlos nutzbaren Onlinediensten entwickelt. Neben horizontalen Onlinediensten, die sich prinzipiell an jeden Internetnutzer richten (bspw. Dropbox, Twitter, WhatsApp), nimmt auch die Zahl von vertikalen Diensten f{\"u}r wissenschaftliche bzw. Forschungszwecke immer weiter zu (bspw. GoogleScholar, ResearchGate, figshare). F{\"u}r Forschende er{\"o}ffnen sich damit vielf{\"a}ltige neue M{\"o}glichkeiten, ihren individuellen Forschungsprozess durch digitale Werkzeuge zu verbessern. Aufgrund rechtlicher, technischer und personeller Restriktionen k{\"o}nnen jedoch interne Dienstleister bei der Identifizierung, Auswahl und Nutzung externer Onlinedienste nur wenig Unterst{\"u}tzung leisten. Aus einer serviceorientierten Perspektive stehen Forschende zunehmend vor dem Problem, wie sich heterogene IT-Dienste interner und externer Anbieter in den eigenen Forschungsprozess integrieren lassen. Als L{\"o}sungsansatz skizziert das Kapitel das Konzept eines pers{\"o}nlichen Forschungsinformationssystems nach Gesichtspunkten eines digitalen Servicesystems.}, language = {de} }