@article{GhoschBaierSchuetzetal.2016,
  author    = {Ghosch, S. and Baier, M. and Sch{\"u}tz, J. and Schneider, Felix and Scherer, Ulrich W.},
  title     = {Analysis of electronic autoradiographs by mathematical post-processing},
  series = {Radiation Effects and Defects in Solids: Incorporating plasma science and plasma technology},
  volume    = {171},
  journal   = {Radiation Effects and Defects in Solids: Incorporating plasma science and plasma technology},
  number    = {1-2},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1029-4953},
  doi       = {10.1080/10420150.2016.1155587},
  pages     = {161 -- 172},
  year      = {2016},
  abstract  = {Autoradiography is a well-established method of nuclear imaging. When different radionuclides are present simultaneously, additional processing is needed to distinguish distributions of radionuclides. In this work, a method is presented where aluminium absorbers of different thickness are used to produce images with different cut-off energies. By subtracting images pixel-by-pixel one can generate images representing certain ranges of β-particle energies. The method is applied to the measurement of irradiated reactor graphite samples containing several radionuclides to determine the spatial distribution of these radionuclides within pre-defined energy windows. The process was repeated under fixed parameters after thermal treatment of the samples. The greyscale images of the distribution after treatment were subtracted from the corresponding pre-treatment images. Significant changes in the intensity and distribution of radionuclides could be observed in some samples. Due to the thermal treatment parameters the most significant differences were observed in the ³H and ¹⁴C inventory and distribution.},
  language  = {en}
}
@article{LeversStaatLaack2016,
  author    = {Levers, A. and Staat, Manfred and Laack, Walter van},
  title     = {Analysis of the long-term effect of the MBST® nuclear magnetic resonance therapy on gonarthrosis},
  series = {Orthopedic Practice},
  volume    = {47},
  journal   = {Orthopedic Practice},
  number    = {11},
  pages     = {521 -- 528},
  year      = {2016},
  language  = {en}
}
@article{KrollLudwigs2016,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Anmerkung zu EuGH, Urt. v. 9.9.2015, Rs. C-4/14 Christophe Bohez v. Ingrid Wiertz},
  series = {GRP : Zeitschrift f{\"u}r das Privatrecht der Europ{\"a}ischen Union},
  journal   = {GRP : Zeitschrift f{\"u}r das Privatrecht der Europ{\"a}ischen Union},
  number    = {5},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2193-9519},
  doi       = {10.9785/gpr-2016-0509},
  pages     = {255 -- 258},
  year      = {2016},
  abstract  = {Die Entscheidung in der Rechtssache Bohez /Wiertz bot dem EuGH Gelegenheit, zur Abgrenzung der Anwendungsbereiche von Br{\"u}ssel I-(jetzt: Br{\"u}ssel Ia-) und Br{\"u}ssel IIa-VO Stellung zu nehmen. Den Ausgangspunkt bildete dabei ein familienrechtlicher Sachverhalt, n{\"a}mlich die zwangsweise Durchsetzung des Umgangsrechts eines Vaters im Hinblick auf seine beiden Kinder. Auf den ersten Blick lag daher eine Anwendung der auf Verfahren betreffend die elterliche Verantwortung bezogenen Br{\"u}ssel IIa-VO nahe. Andererseits schien auch eine Argumentation denkbar, wonach es sich bei dem zu vollstreckenden Anspruch auf Zahlung des Zwangsgeldes um eine Geldforderung handele, deren Vollstreckung nach der Br{\"u}ssel I-VO zu erfolgen habe. Was vordergr{\"u}ndig die Ermittlung des einschl{\"a}gigen EU-Rechtsaktes betraf, erwies sich bei genauerer Betrachtung als Bestimmung der dogmatischen Rechtsnatur des Zwangsgeldes.},
  language  = {de}
}
@article{AlKaidyKuthanHeringetal.2016,
  author    = {Al-Kaidy, Huschyar and Kuthan, Kai and Hering, Thomas and Tippk{\"o}tter, Nils},
  title     = {Aqueous droplets used as enzymatic microreactors and their electromagnetic actuation},
  series = {Journal of Visualized Experiments},
  journal   = {Journal of Visualized Experiments},
  number    = {Issue 126},
  issn      = {1940-087X},
  doi       = {10.3791/54643},
  year      = {2016},
  abstract  = {For the successful implementation of microfluidic reaction systems, such as PCR and electrophoresis, the movement of small liquid volumes is essential. In conventional lab-on-a-chip-platforms, solvents and samples are passed through defined microfluidic channels with complex flow control installations. The droplet actuation platform presented here is a promising alternative. With it, it is possible to move a liquid drop (microreactor) on a planar surface of a reaction platform (lab-in-a-drop). The actuation of microreactors on the hydrophobic surface of the platform is based on the use of magnetic forces acting on the outer shell of the liquid drops which is made of a thin layer of superhydrophobic magnetite particles. The hydrophobic surface of the platform is needed to avoid any contact between the liquid core and the surface to allow a smooth movement of the microreactor. On the platform, one or more microreactors with volumes of 10 µL can be positioned and moved simultaneously. The platform itself consists of a 3 x 3 matrix of electrical double coils which accommodate either neodymium or iron cores. The magnetic field gradients are automatically controlled. By variation of the magnetic field gradients, the microreactors' magnetic hydrophobic shell can be manipulated automatically to move the microreactor or open the shell reversibly. Reactions of substrates and corresponding enzymes can be initiated by merging the microreactors or bringing them into contact with surface immobilized catalysts.},
  language  = {en}
}
@article{OlbertzGroth2016,
  author    = {Olbertz, Klaus and Groth, Alexandra},
  title     = {Arbeitnehmer{\"u}berlassung: Neue gesetzliche Spielregeln ab dem 1.1.2017},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {371 -- 374},
  year      = {2016},
  abstract  = {Die bereits mit Koalitionsvertrag vom 16.12.2013 in Aussicht genommene Neuregulierung der Leiharbeit steht nunmehr kurz bevor. Nach diversen Korrekturen des urspr{\"u}nglichen Referentenentwurfes des Bundesministeriums f{\"u}r Arbeit und Soziales liegt seit dem 20.7.2016 der endg{\"u}ltige Entwurf des Gesetzes zur {\"A}nderung des Arbeitnehmer{\"u}berlassungsgesetzes und anderer Gesetze vor (A{\"U}G-E). Die {\"A}nderungen sollen zum 1.1.2017 in Kraft treten. Von gr{\"o}ßeren {\"A}nderungen des Gesetzesentwurfs wird allgemein nicht mehr ausgegangen. F{\"u}r die betriebliche Praxis sollte dies Anlass sein, sich bereits jetzt mit den sich abzeichnenden wichtigsten Neuerungen vertraut zu machen und diese entsprechend umzusetzen, um nachteilige Konsequenzen zu vermeiden.},
  language  = {de}
}
@article{Olbertz2016,
  author    = {Olbertz, Klaus},
  title     = {Arbeitszeit und Verg{\"u}tungspflicht des Arbeitgebers - Entstehung des Lohnanspruchs und arbeitsvertragliche Gestaltungsm{\"o}glichkeiten},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {14},
  issn      = {1860-9449},
  pages     = {1026 -- 1037},
  year      = {2016},
  abstract  = {Kaum ein anderer Begriff h{\"a}lt so viele Varianten und Facetten bereit wie die Arbeitszeit. F{\"u}r die betriebliche Praxis stellt sich dabei regelm{\"a}ßig die Frage, was {\"u}berhaupt zur Arbeitszeit geh{\"o}rt, entsprechend als solche zu verg{\"u}ten ist und welche Optionen bei der Gestaltung der Arbeitsvertr{\"a}ge bestehen. Der folgende Praxisleitfaden gibt einen {\"U}berblick {\"u}ber die aktuelle Rechtslage und enth{\"a}lt zugleich Hinweise f{\"u}r die Vertragsgestaltung. Die hierzu insbesondere in den letzten Jahren ergangenen zahlreichen aktuellen Gerichtsentscheidungen werden besonders ber{\"u}cksichtigt.},
  language  = {de}
}
@article{InfantinoPaulssenMostaccietal.2016,
  author    = {Infantino, Angelo and Paulßen, Elisabeth and Mostacci, Domiziano and Schaffer, Paul and Trinczek, Michael and Hoehr, Cornelia},
  title     = {Assessment of the production of medical isotopes using the Monte Carlo code FLUKA: Simulations against experimental measurements},
  series = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms},
  volume    = {366},
  journal   = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9584},
  doi       = {10.1016/j.nimb.2015.10.067},
  pages     = {117 -- 123},
  year      = {2016},
  abstract  = {The Monte Carlo code FLUKA is used to simulate the production of a number of positron emitting radionuclides, ¹⁸F, ¹³N, ⁹⁴Tc, ⁴⁴Sc, ⁶⁸Ga, ⁸⁶Y, ⁸⁹Zr, ⁵²Mn, ⁶¹Cu and ⁵⁵Co, on a small medical cyclotron with a proton beam energy of 13 MeV. Experimental data collected at the TR13 cyclotron at TRIUMF agree within a factor of 0.6 ± 0.4 with the directly simulated data, except for the production of ⁵⁵Co, where the simulation underestimates the experiment by a factor of 3.4 ± 0.4. The experimental data also agree within a factor of 0.8 ± 0.6 with the convolution of simulated proton fluence and cross sections from literature. Overall, this confirms the applicability of FLUKA to simulate radionuclide production at 13 MeV proton beam energy.},
  language  = {en}
}
@article{NeuJanserKhatibietal.2016,
  author    = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.},
  title     = {Automated modal parameter-based anomaly detection under varying wind excitation},
  series = {Structural Health Monitoring},
  volume    = {15},
  journal   = {Structural Health Monitoring},
  number    = {6},
  publisher = {Sage},
  address   = {London},
  issn      = {1475-9217},
  doi       = {10.1177/1475921716665803},
  pages     = {1 -- 20},
  year      = {2016},
  abstract  = {Wind-induced operational variability is one of the major challenges for structural health monitoring of slender engineering structures like aircraft wings or wind turbine blades. Damage sensitive features often show an even bigger sensitivity to operational variability. In this study a composite cantilever was subjected to multiple mass configurations, velocities and angles of attack in a controlled wind tunnel environment. A small-scale impact damage was introduced to the specimen and the structural response measurements were repeated. The proposed damage detection methodology is based on automated operational modal analysis. A novel baseline preparation procedure is described that reduces the amount of user interaction to the provision of a single consistency threshold. The procedure starts with an indeterminate number of operational modal analysis identifications from a large number of datasets and returns a complete baseline matrix of natural frequencies and damping ratios that is suitable for subsequent anomaly detection. Mahalanobis distance-based anomaly detection is then applied to successfully detect the damage under varying severities of operational variability and with various degrees of knowledge about the present operational conditions. The damage detection capabilities of the proposed methodology were found to be excellent under varying velocities and angles of attack. Damage detection was less successful under joint mass and wind variability but could be significantly improved through the provision of the currently encountered operational conditions.},
  language  = {en}
}
@article{Kern2016,
  author    = {Kern, Alexander},
  title     = {Blitz- und {\"U}berspannungsschutz von Kernkraftwerken - Nachweisf{\"u}hrung der ausreichenden Sicherheit f{\"u}r leittechnische Einrichtungen auch bei Blitzeinschl{\"a}gen mit extremen Parametern},
  series = {Atw. International Journal for Nuclear Power},
  volume    = {61},
  journal   = {Atw. International Journal for Nuclear Power},
  number    = {8/9},
  publisher = {Inforum},
  address   = {Berlin},
  issn      = {1431-5254},
  pages     = {534 -- 543},
  year      = {2016},
  abstract  = {F{\"u}r das Auftreten extremer Wetterereignisse werden f{\"u}r Kernkraftwerke Eintrittsh{\"a}ufigkeiten f{\"u}r nicht mehr beherrschbare Zust{\"a}nde von unter 10⁻⁴/a gefordert. Dies gilt auch f{\"u}r die Einwirkung von Blitzeinschl{\"a}gen. Die bisherige Nachweisf{\"u}hrung zu Blitz- und {\"U}berspannungsschutz eines KKW in Deutschland ist deterministisch. In diesem Bericht werden das Vorgehen f{\"u}r einen entsprechenden Nachweis f{\"u}r leittechnische Einrichtungen der Sicherheitstechnik von KKW, der zur geforderten Zielgr{\"o}ße der Eintrittsh{\"a}ufigkeit f{\"u}hrt. Die Ergebnisse werden zusammenfassend bewertet.},
  language  = {de}
}
@article{Olbertz2016,
  author    = {Olbertz, Klaus},
  title     = {Bundesregierung beschließt Flexi-Rente},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {42},
  issn      = {1860-9449},
  pages     = {3145 -- 3147},
  year      = {2016},
  abstract  = {Das Bundeskabinett hat sich am 14.9.2016 mit der sog. Flexi-Rente befasst und eine sog. Formulierungshilfe verabschiedet, der ein aus den Regierungsfraktionen des Bundestages einzubringender entsprechender Gesetzesentwurf zur „Flexibilisierung des {\"U}bergangs vom Erwerbsleben in den Ruhestand und zur St{\"a}rkung von Pr{\"a}vention und Rehabilitation im Erwerbsleben (Flexirentengesetz)" folgen soll. Eine entsprechende Vorabfassung des Gesetzesentwurfs liegt bereits vor (BT-Drucks. 18/9787). Mit der Flexi-Rente sollen im Wesentlichen zwei Ziele erreicht werden: Das flexible Arbeiten bis zum Erreichen der Regelaltersgrenze soll gef{\"o}rdert und das Weiterarbeiten {\"u}ber die Regelaltersgrenze hinaus attraktiver gemacht werden. Hierf{\"u}r ist eine Reihe von gesetzlichen {\"A}nderungen geplant, insbesondere im SGB VI und SGB III. Teile des Gesetzes sollen schon zum 1.1.2017 in Kraft treten. Grund genug, sich bereits jetzt einen ersten {\"U}berblick {\"u}ber die geplanten Neuerungen zu verschaffen.},
  language  = {de}
}