@article{VahidpourGuthmanArreolaetal.2022,
  author    = {Vahidpour, Farnoosh and Guthman, Eric and Arreola, Julia and Alghazali, Yousef H. M. and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Assessment of Various Process Parameters for Optimized Sterilization Conditions Using a Multi-Sensing Platform},
  series = {Foods},
  volume    = {11},
  journal   = {Foods},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2304-8158},
  doi       = {10.3390/foods11050660},
  pages     = {Artikel 660},
  year      = {2022},
  abstract  = {In this study, an online multi-sensing platform was engineered to simultaneously evaluate various process parameters of food package sterilization using gaseous hydrogen peroxide (H₂O₂). The platform enabled the validation of critical aseptic parameters. In parallel, one series of microbiological count reduction tests was performed using highly resistant spores of B. atrophaeus DSM 675 to act as the reference method for sterility validation. By means of the multi-sensing platform together with microbiological tests, we examined sterilization process parameters to define the most effective conditions with regards to the highest spore kill rate necessary for aseptic packaging. As these parameters are mutually associated, a correlation between different factors was elaborated. The resulting correlation indicated the need for specific conditions regarding the applied H₂O₂ gas temperature, the gas flow and concentration, the relative humidity and the exposure time. Finally, the novel multi-sensing platform together with the mobile electronic readout setup allowed for the online and on-site monitoring of the sterilization process, selecting the best conditions for sterility and, at the same time, reducing the use of the time-consuming and costly microbiological tests that are currently used in the food package industry.},
  language  = {en}
}
@article{InfantinoPaulssenMostaccietal.2016,
  author    = {Infantino, Angelo and Paulßen, Elisabeth and Mostacci, Domiziano and Schaffer, Paul and Trinczek, Michael and Hoehr, Cornelia},
  title     = {Assessment of the production of medical isotopes using the Monte Carlo code FLUKA: Simulations against experimental measurements},
  series = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms},
  volume    = {366},
  journal   = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9584},
  doi       = {10.1016/j.nimb.2015.10.067},
  pages     = {117 -- 123},
  year      = {2016},
  abstract  = {The Monte Carlo code FLUKA is used to simulate the production of a number of positron emitting radionuclides, ¹⁸F, ¹³N, ⁹⁴Tc, ⁴⁴Sc, ⁶⁸Ga, ⁸⁶Y, ⁸⁹Zr, ⁵²Mn, ⁶¹Cu and ⁵⁵Co, on a small medical cyclotron with a proton beam energy of 13 MeV. Experimental data collected at the TR13 cyclotron at TRIUMF agree within a factor of 0.6 ± 0.4 with the directly simulated data, except for the production of ⁵⁵Co, where the simulation underestimates the experiment by a factor of 3.4 ± 0.4. The experimental data also agree within a factor of 0.8 ± 0.6 with the convolution of simulated proton fluence and cross sections from literature. Overall, this confirms the applicability of FLUKA to simulate radionuclide production at 13 MeV proton beam energy.},
  language  = {en}
}
@article{AlbrachtArampatzisBaltzopoulos2008,
  author    = {Albracht, Kirsten and Arampatzis, A. and Baltzopoulos, V.},
  title     = {Assessment of muscle volume and physiological cross-sectional area of the human triceps surae muscle in vivo},
  series = {Journal of Biomechanics},
  volume    = {41},
  journal   = {Journal of Biomechanics},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2008.04.020},
  pages     = {2211 -- 2218},
  year      = {2008},
  language  = {en}
}
@article{KearneyHerrmannNavaetal.2003,
  author    = {Kearney, D. and Herrmann, Ulf and Nava, P. and Kelly, B. and Mahoney, R. and Pacheco, J. and Cable, R. and Potrovitza, N. and Blake, D. and Price, H.},
  title     = {Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field},
  series = {Journal of Solar Energy Engineering},
  volume    = {125},
  journal   = {Journal of Solar Energy Engineering},
  number    = {2},
  issn      = {1528-8986},
  doi       = {10.1115/1.1565087},
  pages     = {170 -- 176},
  year      = {2003},
  language  = {en}
}
@article{ErmolaevErichevAntonovetal.2019,
  author    = {Ermolaev, AP and Erichev, VP and Antonov, AA and Grigoryan, GL and Kotliar, Konstantin and Levitsky, YV and Hderi, K and Mazurova, YV},
  title     = {Assessing retinal photosensitivity in patients with central vision impairment using a portable perimeter (a preliminary report)},
  series = {Vestnik oftalmologii},
  volume    = {135},
  journal   = {Vestnik oftalmologii},
  number    = {3},
  doi       = {10.17116/oftalma201913503146},
  pages     = {46 -- 54},
  year      = {2019},
  language  = {ru}
}
@article{KaemperLehrAbeletal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  journal   = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  publisher = {Fuji Technology Press},
  pages     = {31 -- 31},
  year      = {1995},
  language  = {en}
}
@article{Mayer1991,
  author    = {Mayer, Claudia},
  title     = {Aspekte der Wiedervereinigung in der aktuellen deutschen Literatur.},
  series = {Forum Deutsch : Informationen, Meinungen, Materialien und Tips f{\"u}r kanadische Deutschlehrer / St{\"a}ndige Konferenz kanadischer Deutschlehrer (1991)},
  journal   = {Forum Deutsch : Informationen, Meinungen, Materialien und Tips f{\"u}r kanadische Deutschlehrer / St{\"a}ndige Konferenz kanadischer Deutschlehrer (1991)},
  pages     = {16 -- 22},
  year      = {1991},
  language  = {de}
}
@article{Grap1995,
  author    = {Grap, Rolf Dietmar},
  title     = {Aspekte der Optimierung der Auftragsabwicklung in einem Konzernbetrieb},
  series = {Gruppenarbeit in der Praxis : neue Arbeitsstrukturen zwischen Anspruch und Realit{\"a}t / Rolf Grap ; Volker Gebbert (Hrsg.)},
  journal   = {Gruppenarbeit in der Praxis : neue Arbeitsstrukturen zwischen Anspruch und Realit{\"a}t / Rolf Grap ; Volker Gebbert (Hrsg.)},
  publisher = {Verl. der GOM},
  address   = {Herzogenrath},
  isbn      = {3-931196-01-1},
  pages     = {194 -- 206},
  year      = {1995},
  language  = {de}
}
@article{Blome2001,
  author    = {Blome, Hans-Joachim},
  title     = {Aspekte der modernen Kosmologie},
  series = {Mensch, Leben, Schwerkraft, Kosmos : Perspektiven biowissenschaftlicher Weltraumforschung in Deutschland ; Berichtsband einer Klausurtagung vom 20. - 22.10.2000 in Stuttgart-Hohenheim/Birkach / Hinrich Rahmann ... (Hrsg.). [Ausgerichtet von der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt medizin]},
  journal   = {Mensch, Leben, Schwerkraft, Kosmos : Perspektiven biowissenschaftlicher Weltraumforschung in Deutschland ; Berichtsband einer Klausurtagung vom 20. - 22.10.2000 in Stuttgart-Hohenheim/Birkach / Hinrich Rahmann ... (Hrsg.). [Ausgerichtet von der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt medizin]},
  publisher = {Heimbach},
  address   = {Stuttgart},
  isbn      = {3-935380-03-8},
  pages     = {50 -- 79},
  year      = {2001},
  language  = {de}
}
@article{BaatzButzBaeck1972,
  author    = {Baatz, Udo and Butz, Hans-Werner and B{\"a}ck, Karin},
  title     = {Aspekte der Bildschirmprogrammierung im Rahmen des rechnergest{\"u}tzten Konstruierens. Some aspects of CRT-screen programming in computer aided design.},
  series = {eR - Elektronische Rechenanlagen},
  volume    = {14},
  journal   = {eR - Elektronische Rechenanlagen},
  number    = {5},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen},
  isbn      = {0013-5720},
  doi       = {10.1524/itit.1972.14.16.229},
  pages     = {229 -- 235},
  year      = {1972},
  abstract  = {In den letzten Jahren hat der Einsatz von graphischen Datenverarbeitungsanlagen auf dem technischen, naturwissenschaftlichen und kommerziellen Sektor immer mehr an allgemeinem Interesse und Bedeutung gewonnen. Diese Entwicklung hat neue Aspekte und Probleme in bezug auf Anwendungsm{\"o}glichkeiten, Programmierung, Datenstrukturen sowie der Hard- und Software dieser Anlagen hervorgerufen. Zur Zeit werden von verschiedenen Institutionen die Einsatzm{\"o}glichkeiten graphischer Datenverarbeitungsanlagen in den Funktionsbereichen Konstruktion und Arbeitsvorbereitung untersucht. Der folgende Beitrag zeigt eine kurze {\"U}bersicht {\"u}ber die verschiedenen programmiertechnischen Probleme sowie eine Auswahl von Programmbeispielen, die am Laboratorium f{\"u}r Werkzeugmaschinen und Betriebslehre der RWTH Aachen entwickelt wurden. Bei den Bildschirmsystemen wird zwischen zwei Arten unterschieden. Aktive Bildschirmeinheiten besitzen als {\"a}ußeres Merkmal einen Lichtstift und eine Funktionstastatur zur Programmverzweigung. Passive Bildschirmeinheiten lassen demgegen{\"u}ber einen Eingriff in das Programm in der oben aufgef{\"u}hrten Form nicht zu. Zwischen diesen extremen Formen gibt es noch eine Reihe Mischformen. Die in Aachen zur Verf{\"u}gung stehende Anlage arbeitet aktiv und wird im nachfolgenden Kapitel n{\"a}her beschrieben.},
  language  = {de}
}