@article{TeumerCapitainRossJonesetal.2018,
  author    = {Teumer, T. and Capitain, C. and Ross-Jones, J. and Tippk{\"o}tter, Nils and R{\"a}dle, M. and Methner, F.-J.},
  title     = {In-line Haze Monitoring Using a Spectrally Resolved Back Scattering Sensor},
  series = {BrewingScience},
  volume    = {71},
  journal   = {BrewingScience},
  number    = {5/6},
  publisher = {Fachverlag Hans Carl},
  address   = {N{\"u}rnberg},
  issn      = {1613-2041},
  pages     = {49 -- 55},
  year      = {2018},
  abstract  = {In the present work an optical sensor in combination with a spectrally resolved detection device for in-line particle-size-monitoring for quality control in beer production is presented. The principle relies on the size and wavelength dependent backscatter of growing particles in fluids. Measured interference structures of backscattered light are compared with calculated theoretical values, based on Mie-Theory, and fitted with a linear least square method to obtain particle size distributions. For this purpose, a broadband light source in combination with a process-CCD-spectrometer (charge ? coupled device spectrometer) and process adapted fiber optics are used. The goal is the development of an easy and flexible measurement device for in-line-monitoring of particle size. The presented device can be directly installed in product fill tubes or vessels, follows CIP- (cleaning in place) and removes the need of sample taking. A proof of concept and preliminary results, measuring protein precipitation, are presented.},
  language  = {en}
}
@article{TakenagaSchneiderErbayetal.2015,
  author    = {Takenaga, Shoko and Schneider, Benno and Erbay, E. and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201532053},
  pages     = {1347 -- 1352},
  year      = {2015},
  abstract  = {A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.},
  language  = {en}
}
@inproceedings{TakenagaHerreraWerneretal.2013,
  author    = {Takenaga, Shoko and Herrera, Cony F. and Werner, Frederik and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and {\"O}hlschl{\"a}ger, Peter and Wagner, Torsten},
  title     = {Detection of the metabolic activity of cells by differential measurements based on a single light-addressable potentiometric sensor chip},
  series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  organization    = {Dresdner Sensor-Symposium <11, 2013>},
  isbn      = {978-3-9813484-5-3},
  pages     = {63 -- 67},
  year      = {2013},
  language  = {en}
}
@article{TakenagaBiselliSchnitzleretal.2014,
  author    = {Takenaga, Shoko and Biselli, Manfred and Schnitzler, Thomas and {\"O}hlschl{\"a}ger, Peter and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Toward multi-analyte bioarray sensors: LAPS-based on-chip determination of a Michaelis-Menten-like kinetics for cell culturing},
  series = {Physica status solidi A : Applications and materials science},
  volume    = {211},
  journal   = {Physica status solidi A : Applications and materials science},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X (E); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)},
  doi       = {10.1002/pssa.201330464},
  pages     = {1410 -- 1415},
  year      = {2014},
  abstract  = {The metabolic activity of Chinese hamster ovary (CHO) cells was observed using a light-addressable potentiometric sensor (LAPS). The dependency toward different glucose concentrations (17-200 mM) follows a Michaelis-Menten kinetics trajectory with Kₘ = 32.8 mM, and the obtained Kₘ value in this experiment was compared with that found in literature. In addition, the pH shift induced by glucose metabolism of tumor cells transfected with the HPV-16 genome (C3 cells) was successfully observed. These results indicate the possibility to determine the tumor cells metabolism with a LAPS-based measurement device.},
  language  = {en}
}
@article{SvaneborgKarimiVarzanehHojdisetal.2016,
  author    = {Svaneborg, Carsten and Karimi-Varzaneh, Hossein Ali and Hojdis, Nils and Fleck, Franz and Everaers, Ralf},
  title     = {Multiscale approach to equilibrating model polymer melts},
  series = {Physical Review E},
  volume    = {94},
  journal   = {Physical Review E},
  number    = {032502},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.94.032502},
  year      = {2016},
  abstract  = {We present an effective and simple multiscale method for equilibrating Kremer Grest model polymer melts of varying stiffness. In our approach, we progressively equilibrate the melt structure above the tube scale, inside the tube and finally at the monomeric scale. We make use of models designed to be computationally effective at each scale. Density fluctuations in the melt structure above the tube scale are minimized through a Monte Carlo simulated annealing of a lattice polymer model. Subsequently the melt structure below the tube scale is equilibrated via the Rouse dynamics of a force-capped Kremer-Grest model that allows chains to partially interpenetrate. Finally the Kremer-Grest force field is introduced to freeze the topological state and enforce correct monomer packing. We generate 15 melts of 500 chains of 10.000 beads for varying chain stiffness as well as a number of melts with 1.000 chains of 15.000 monomers. To validate the equilibration process we study the time evolution of bulk, collective, and single-chain observables at the monomeric, mesoscopic, and macroscopic length scales. Extension of the present method to longer, branched, or polydisperse chains, and/or larger system sizes is straightforward.},
  language  = {en}
}
@article{SvaneborgKarimiVarzanehHojdisetal.2018,
  author    = {Svaneborg, Carsten and Karimi-Varzaneh, Hossein Ali and Hojdis, Nils and Fleck, Franz and Everaers, Ralf},
  title     = {Kremer-Grest Models for Universal Properties of Specific Common Polymer Species},
  series = {Soft Condensed Matter},
  journal   = {Soft Condensed Matter},
  number    = {1606.05008},
  year      = {2018},
  abstract  = {The Kremer-Grest (KG) bead-spring model is a near standard in Molecular Dynamic simulations of generic polymer properties. It owes its popularity to its computational efficiency, rather than its ability to represent specific polymer species and conditions. Here we investigate how to adapt the model to match the universal properties of a wide range of chemical polymers species. For this purpose we vary a single parameter originally introduced by Faller and M{\"u}ller-Plathe, the chain stiffness. Examples include polystyrene, polyethylene, polypropylene, cis-polyisoprene, polydimethylsiloxane, polyethyleneoxide and styrene-butadiene rubber. We do this by matching the number of Kuhn segments per chain and the number of Kuhn segments per cubic Kuhn volume for the polymer species and for the Kremer-Grest model. We also derive mapping relations for converting KG model units back to physical units, in particular we obtain the entanglement time for the KG model as function of stiffness allowing for a time mapping. To test these relations, we generate large equilibrated well entangled polymer melts, and measure the entanglement moduli using a static primitive-path analysis of the entangled melt structure as well as by simulations of step-strain deformation of the model melts. The obtained moduli for our model polymer melts are in good agreement with the experimentally expected moduli.},
  language  = {en}
}
@article{StanleyHorsburghRossetal.2009,
  author    = {Stanley, Lesley A. and Horsburgh, Brian C. and Ross, Jillian and Scheer, Nico and Wolf, C. Roland},
  title     = {Drug transporters: Gatekeepers controlling access of xenobiotics to the cellular interior},
  series = {Drug Metabolism Reviews},
  volume    = {41},
  journal   = {Drug Metabolism Reviews},
  number    = {1},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1097-9883},
  doi       = {10.1080/03602530802605040},
  pages     = {27 -- 65},
  year      = {2009},
  language  = {en}
}
@article{StanleyHorsburghRossetal.2006,
  author    = {Stanley, Lesley A. and Horsburgh, Brian C. and Ross, Jillian and Scheer, Nico and Wolf, C. Roland},
  title     = {Nuclear Receptors which play a pivotal role in drug disposition and chemical toxicity},
  series = {Drug Metabolism Reviews},
  volume    = {38},
  journal   = {Drug Metabolism Reviews},
  number    = {3},
  issn      = {1097-9883},
  doi       = {10.1080/03602530600786232},
  pages     = {515 -- 597},
  year      = {2006},
  language  = {en}
}
@misc{StadtmuellerTippkoetterUlber2013,
  author    = {Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {A method for production of single-stranded nucleic acids [Europ{\"a}ische Patentanmeldung]},
  publisher = {Europ{\"a}isches Patentamt},
  address   = {Den Hague},
  pages     = {14 Seiten},
  year      = {2013},
  language  = {en}
}
@misc{StadtmuellerTippkoetterUlber2015,
  author    = {Stadtm{\"u}ller, Ralf and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Method for production of single-stranded macronucleotides},
  year      = {2015},
  abstract  = {The invention relates to a method for production of single-stranded macronucleotides by amplifying and ligating an extended monomeric single-stranded target nucleic acid sequence (targetss) into a repetitive cluster of double-stranded target nucleic acid sequences (targetds), and subsequently cloning the construct into a vector (aptagene vector). The aptagene vector is transformed into host cells for replication of the aptagene and isolated in order to optain single-stranded target sequences (targetss). The invention also relates to single-stranded nucleic acids, produced by a method of the invention.},
  language  = {en}
}