@inproceedings{KernImaniVashianiTimmermanns2021,
  author    = {Kern, Alexander and Imani Vashiani, Anahita and Timmermanns, Tobias},
  title     = {Threat for human beings due to touch voltages and body currents caused by direct lightning strikes in case of non-isolated lightning protection systems using natural components},
  series = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)},
  booktitle = {35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-6654-2346-5},
  doi       = {10.1109/ICLPandSIPDA54065.2021.9627465},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {For typical cases of non-isolated lightning protection systems (LPS) the impulse currents are investigated which may flow through a human body directly touching a structural part of the LPS. Based on a basic LPS model with conventional down-conductors especially the cases of external and internal steel columns and metal fa{\c{c}}ades are considered and compared. Numerical simulations of the line quantities voltages and currents in the time domain are performed with an equivalent circuit of the entire LPS. As a result it can be stated that by increasing the number of conventional down-conductors and external steel columns the threat for a human being can indeed be reduced, but not down to an acceptable limit. In case of internal steel columns used as natural down-conductors the threat can be reduced sufficiently, depending on the low-resistive connection of the steel columns to the lightning equipotential bonding or the earth termination system, resp. If a metal fa{\c{c}}ade is used the threat for human beings touching is usually very low, if the fa{\c{c}}ade is sufficiently interconnected and multiply connected to the lightning equipotential bonding or the earth termination system, resp.},
  language  = {en}
}
@book{Pieper2021,
  author    = {Pieper, Martin},
  title     = {Quantum mechanics: Introduction to mathematical formulation},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-32644-9},
  doi       = {10.1007/978-3-658-32645-6},
  pages     = {XIII, 33},
  year      = {2021},
  abstract  = {Anyone who has always wanted to understand the hieroglyphs on Sheldon's blackboard in the TV series The Big Bang Theory or who wanted to know exactly what the fate of Schr{\"o}dinger's cat is all about will find a short, descriptive introduction to the world of quantum mechanics in this essential. The text particularly focuses on the mathematical description in the Hilbert space. The content goes beyond popular scientific presentations, but is nevertheless suitable for readers without special prior knowledge thanks to the clear examples.},
  language  = {en}
}
@incollection{JordanKatzPieper2021,
  author    = {Jordan, Frank and Katz, Christiane and Pieper, Martin},
  title     = {Online-Kollaboration in der Mathematik: Ein Design-Based-Research-Projekt},
  series = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen},
  booktitle = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen},
  publisher = {TH K{\"o}ln},
  address   = {K{\"o}ln},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:832-cos4-9465},
  pages     = {245 -- 261},
  year      = {2021},
  abstract  = {Die Studie er{\"o}rtert anhand eines Fallbeispiels aus der Mathematik f{\"u}r Ingenieur*innen, wie didaktische Gestaltungsprinzipien f{\"u}r Soziale Pr{\"a}senz, Kollaboration und das L{\"o}sen von praxisnahen Problemen mit mathematischem Denken in einer Online-Umgebung aussehen k{\"o}nnen. Hierf{\"u}r zieht der Beitrag den forschungsmethodologischen Rahmen Design-Based Research (DBR) hinzu und berichtet {\"u}ber Zwischenergebnisse. DBR wird an dieser Stelle als eine systematische Herangehensweise an kurzfristige Lehrver{\"a}nderungen und als Chance auf dem Weg zu einer neuen Hochschullehre nach der COVID-19-Pandemie dargestellt, die theoretische und empirische Erkenntnisse mit Praxisverkn{\"u}pfung und -relevanz vereint.},
  language  = {de}
}
@inproceedings{PfeifferBalcGebhardt2021,
  author    = {Pfeiffer, Johann and Balc, N. and Gebhardt, Andreas},
  title     = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen},
  series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  publisher = {Verlag Ernst-Abbe-Hochschule Jena},
  address   = {Jena},
  isbn      = {978-3-932886-36-2},
  pages     = {99 -- 102},
  year      = {2021},
  abstract  = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.},
  language  = {de}
}
@inproceedings{EnglhardWeberArent2021,
  author    = {Englhard, Markus and Weber, Tobias and Arent, Jan-Christoph},
  title     = {Efficiency enhancement for CFRP-Prepregautoclave manufacturing by means of simulation-assisted loading optimization},
  series = {Proceedings of SAMPE Europe Conference 2021},
  booktitle = {Proceedings of SAMPE Europe Conference 2021},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {A new method for improved autoclave loading within the restrictive framework of helicopter manufacturing is proposed. It is derived from experimental and numerical studies of the curing process and aims at optimizing tooling positions in the autoclave for fast and homogeneous heat-up. The mold positioning is based on two sets of information. The thermal properties of the molds, which can be determined via semi-empirical thermal simulation. The second information is a previously determined distribution of heat transfer coefficients inside the autoclave. Finally, an experimental proof of concept is performed to show a cycle time reduction of up to 31\% using the proposed methodology.},
  language  = {en}
}
@book{Feuerriegel2021,
  author    = {Feuerriegel, Uwe},
  title     = {W{\"a}rme{\"u}bertragung mit EXCEL und VBA: W{\"a}rmetechnische Berechnungen und Simulationen effektiv durchf{\"u}hren und professionell dokumentieren},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-35905-8},
  doi       = {10.1007/978-3-658-35906-5},
  pages     = {XX, 439 Seiten},
  year      = {2021},
  abstract  = {Dieses Lehrbuch vermittelt die Grundlagen der W{\"a}rme{\"u}bertragung sowie den Umgang mit EXCEL-VBA von der Erstellung von Makros bis zu benutzerdefinierten Funktionen. Es legt damit eine Basis f{\"u}r die schnelle und professionelle Durchf{\"u}hrung von Berechnungen und Simulationen. Die angeleitete Erstellung von Berechnungsmodulen mit EXCEL und VBA aus allen wichtigen Bereichen der W{\"a}rme{\"u}bertragung bildet den inhaltlichen Schwerpunkt. Dazu z{\"a}hlen die station{\"a}re W{\"a}rmeleitung und der station{\"a}re W{\"a}rmedurchgang, die instation{\"a}re W{\"a}rmeleitung, der W{\"a}rme{\"u}bergang bei freier und erzwungener Konvektion sowie die W{\"a}rmestrahlung und der W{\"a}rme{\"u}bergang beim Kondensieren und Sieden. Soweit sinnvoll und m{\"o}glich werden die Stoffwertekorrelationen und die Berechnungsvorschriften aus dem VDI-W{\"a}rmeatlas verwendet. F{\"u}r ausgew{\"a}hlte Anwendungen werden zudem komplexere Auslegungen und Simulationen von Prozessen der W{\"a}rme{\"u}bertragung sowie von W{\"a}rme{\"u}bertragern erstellt. Die Zielgruppen: Studierende in Bachelor- und Masterstudieng{\"a}ngen, Praktiker im Engineering},
  language  = {de}
}
@incollection{AltherrLeise2021,
  author    = {Altherr, Lena and Leise, Philipp},
  title     = {Resilience as a concept for mastering uncertainty},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9},
  pages     = {412 -- 417},
  year      = {2021},
  language  = {en}
}
@incollection{AltherrLeisePfetschetal.2021,
  author    = {Altherr, Lena and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas},
  title     = {Optimal design of resilient technical systems on the example of water supply systems},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78356-3},
  pages     = {429 -- 433},
  year      = {2021},
  language  = {en}
}
@incollection{LeiseAltherr2021,
  author    = {Leise, Philipp and Altherr, Lena},
  title     = {Experimental evaluation of resilience metrics in a fluid system},
  series = {Mastering Uncertainty in Mechanical Engineering},
  booktitle = {Mastering Uncertainty in Mechanical Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78356-3},
  pages     = {442 -- 447},
  year      = {2021},
  language  = {en}
}
@inproceedings{NikolovskiRekeElsenetal.2021,
  author    = {Nikolovski, Gjorgji and Reke, Michael and Elsen, Ingo and Schiffer, Stefan},
  title     = {Machine learning based 3D object detection for navigation in unstructured environments},
  series = {2021 IEEE Intelligent Vehicles Symposium Workshops (IV Workshops)},
  booktitle = {2021 IEEE Intelligent Vehicles Symposium Workshops (IV Workshops)},
  publisher = {IEEE},
  isbn      = {978-1-6654-7921-9},
  doi       = {10.1109/IVWorkshops54471.2021.9669218},
  pages     = {236 -- 242},
  year      = {2021},
  abstract  = {In this paper we investigate the use of deep neural networks for 3D object detection in uncommon, unstructured environments such as in an open-pit mine. While neural nets are frequently used for object detection in regular autonomous driving applications, more unusual driving scenarios aside street traffic pose additional challenges. For one, the collection of appropriate data sets to train the networks is an issue. For another, testing the performance of trained networks often requires tailored integration with the particular domain as well. While there exist different solutions for these problems in regular autonomous driving, there are only very few approaches that work for special domains just as well. We address both the challenges above in this work. First, we discuss two possible ways of acquiring data for training and evaluation. That is, we evaluate a semi-automated annotation of recorded LIDAR data and we examine synthetic data generation. Using these datasets we train and test different deep neural network for the task of object detection. Second, we propose a possible integration of a ROS2 detector module for an autonomous driving platform. Finally, we present the performance of three state-of-the-art deep neural networks in the domain of 3D object detection on a synthetic dataset and a smaller one containing a characteristic object from an open-pit mine.},
  language  = {en}
}