@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@article{KuhnhenneDoeringKockeretal.2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Kocker, Ronald and Pyschny, Dominik and Feldmann, Markus},
  title     = {Die {\"O}kobilanz als Baustein der Nachhaltigkeitsbewertung im Industrie- und Gewerbebau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001336},
  pages     = {439 -- 447},
  year      = {2010},
  abstract  = {Im Herbst 2009 wurde das "Deutsche G{\"u}tesiegel Nachhaltiges Bauen" f{\"u}r die Geb{\"a}udetypen Industriebauten und Handelsbauten offiziell vorgestellt. Die {\"O}kobilanz als wichtiger Baustein der Nachhaltigkeitsbewertung wird somit auch im Industrie- und Gewerbebau zuk{\"u}nftig stark an Bedeutung gewinnen. Der vorliegende Beitrag beinhaltet einen Vergleich der Umweltleistung verschiedener Bauweisen des Industrie- und Gewerbebaus, die durch die {\"O}kobilanzierung quantifizierbar wird, anhand von momentan verf{\"u}gbaren Daten und Methoden. Es werden ausgew{\"a}hlte Ergebnisse sowie vorhandene Unsicherheiten und daraus resultierender Forschungsbedarf aufgezeigt.},
  language  = {de}
}
@article{KuhnhenneDoeringFeldmann2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Feldmann, Markus},
  title     = {Grunds{\"a}tze und L{\"o}sungen zur W{\"a}rmebr{\"u}ckenreduktion im Metallleichtbau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {5},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001330},
  pages     = {345 -- 355},
  year      = {2010},
  abstract  = {Die Anforderungen an das energiesparende Bauen sind mit der Einf{\"u}hrung der Energieeinsparverordnung (EnEV) 2009 auch im Industrie- und Gewerbebau deutlich versch{\"a}rft worden. Einen wesentlichen Beitrag zur Energieeinsparung liefert die Minimierung des Transmissionsw{\"a}rmetransfers. Analysiert man Geb{\"a}udeh{\"u}llen in Metallleichtbauweise stellt man fest, dass eine Erh{\"o}hung der W{\"a}rmed{\"a}mmst{\"a}rke allein noch nicht zielf{\"u}hrend ist, zus{\"a}tzlich sind W{\"a}rmebr{\"u}ckeneffekte zu ber{\"u}cksichtigen und deren Einfl{\"u}sse auf die W{\"a}rmetransmission zu reduzieren. Neben der Bedeutung f{\"u}r die Energieeinsparung ist eine w{\"a}rmetechnisch optimierte Detailausbildung auch erforderlich, um einen ausreichenden Feuchteschutz (Vermeidung von Tauwasser und Schimmelpilz) zu realisieren und so Sch{\"a}den zu vermeiden. Ein wichtiges Hilfsmittel stellt hierzu der vom Industrieverband f{\"u}r Bausysteme im Metallleichtbau (IFBS) herausgegebene W{\"a}rmebr{\"u}ckenatlas der Metall-Sandwichbauweise dar.},
  language  = {de}
}
@article{Goldbach2010,
  author    = {Goldbach, Daniel},
  title     = {Fahrstabilit{\"a}tserh{\"o}hung bei Gespannen durch Querverschiebung des Anh{\"a}ngerkupplungspunktes},
  series = {mechatronik mobil},
  volume    = {2},
  journal   = {mechatronik mobil},
  number    = {1},
  publisher = {Expert Verlag},
  address   = {Renningen},
  issn      = {1867-7371},
  pages     = {23 -- 29},
  year      = {2010},
  language  = {de}
}
@article{WollertLeidinger2010,
  author    = {Wollert, J{\"o}rg and Leidinger, Rafael},
  title     = {Automation trifft Automotive : SPS in der Fahrzeugtechnik},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {4/5},
  publisher = {WEKA Fachmedien},
  address   = {Haar},
  issn      = {1614-0125},
  pages     = {44 -- 48},
  year      = {2010},
  abstract  = {Eine SPS im Kraftfahrzeug? Das geht ja gar nicht - da gibt es doch all die Hersteller f{\"u}r Kfz-Steuerger{\"a}te, die konfigurierbare Hardware anbieten. Im Prinzip ja, aber leider sind gerade die Sensoren oder Aktoren nicht ansteuerbar, die der Entwickler genau f{\"u}r sein aktuelles Projekt ben{\"o}tigt. Dieser Beitrag gibt einen kleinen Einblick in neue M{\"o}glichkeiten des Rapid Prototyping f{\"u}r mechatronische Systeme auf der Basis von Speicherprogrammierbaren Steuerungen (SPS).},
  language  = {de}
}
@article{BolikLinzbach2010,
  author    = {Bolik, Andreas and Linzbach, Meike},
  title     = {Verluste und Zinsschranke in der Bilanzierung latenter Steuern},
  series = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  volume    = {48},
  journal   = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  number    = {31},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0012-1347},
  pages     = {1587 -- 1590},
  year      = {2010},
  abstract  = {Latente Steuern stellen eine Schnittstelle zwischen handelsrechtlicher Rechnungslegung und Steuerrecht dar. Das Verh{\"a}ltnis von Handels- und Steuerrecht ist dabei keinesfalls stetig; vielmehr fordert die Dynamik des deutschen Steuerrechts in vielen Bereichen regelm{\"a}ßige Anpassungen in der Bilanzierung in Handels- und Steuerbilanz. Dies gilt insbesondere f{\"u}r die Bilanzierung latenter Steuern im handelsrechtlichen Jahresabschluss, welche durch das BilMoG deutlich an Bedeutung gewonnen hat. Neben latenten Steuern auf tempor{\"a}re Differenzen ist es nunmehr erforderlich, Verlustvortr{\"a}ge und die Folgen der Zinsschranke bei der Berechnung latenter Steuern zu ber{\"u}cksichtigen. Der nachfolgende Beitrag geht auf die Ber{\"u}cksichtigung von Verlust- und Zinsvortr{\"a}gen und die Ber{\"u}cksichtigungsf{\"a}higkeit von EBITDA-Vortr{\"a}gen bei der Berechnung latenter Steuern ein und beleuchtet dabei insbesondere auch praktische Fragestellungen.},
  language  = {de}
}
@article{MottaghyPechnigTaugsetal.2010,
  author    = {Mottaghy, Darius and Pechnig, Renate and Taugs, Renate and Kr{\"o}ger, Jens and Thomsen, Claudia and Hesse, Fabian and Liebsch-Doerschner, Thomas},
  title     = {Erstellung eines geothermischen Modells f{\"u}r Teile Hamburgs und anliegende Gebiete},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {61},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {12},
  publisher = {WVGW Wirtschafts- u. Verl.Ges. Gas und Wasser},
  address   = {Bonn},
  issn      = {1611-1478},
  pages     = {52 -- 59},
  year      = {2010},
  language  = {de}
}
@article{VogtMottaghyWolfetal.2010,
  author    = {Vogt, C. and Mottaghy, Darius and Wolf, A. and Rath, V. and Pechnig, R. and Clauser, C.},
  title     = {Reducing temperature uncertainties by stochastic geothermal reservoir modelling},
  series = {Geophysical Journal International},
  volume    = {181},
  journal   = {Geophysical Journal International},
  number    = {1},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1365-246X},
  doi       = {10.1111/j.1365-246X.2009.04498.x},
  pages     = {321 -- 333},
  year      = {2010},
  abstract  = {Quantifying and minimizing uncertainty is vital for simulating technically and economically successful geothermal reservoirs. To this end, we apply a stochastic modelling sequence, a Monte Carlo study, based on (i) creating an ensemble of possible realizations of a reservoir model, (ii) forward simulation of fluid flow and heat transport, and (iii) constraining post-processing using observed state variables. To generate the ensemble, we use the stochastic algorithm of Sequential Gaussian Simulation and test its potential fitting rock properties, such as thermal conductivity and permeability, of a synthetic reference model and—performing a corresponding forward simulation—state variables such as temperature. The ensemble yields probability distributions of rock properties and state variables at any location inside the reservoir. In addition, we perform a constraining post-processing in order to minimize the uncertainty of the obtained distributions by conditioning the ensemble to observed state variables, in this case temperature. This constraining post-processing works particularly well on systems dominated by fluid flow. The stochastic modelling sequence is applied to a large, steady-state 3-D heat flow model of a reservoir in The Hague, Netherlands. The spatial thermal conductivity distribution is simulated stochastically based on available logging data. Errors of bottom-hole temperatures provide thresholds for the constraining technique performed afterwards. This reduce the temperature uncertainty for the proposed target location significantly from 25 to 12 K (full distribution width) in a depth of 2300 m. Assuming a Gaussian shape of the temperature distribution, the standard deviation is 1.8 K. To allow a more comprehensive approach to quantify uncertainty, we also implement the stochastic simulation of boundary conditions and demonstrate this for the basal specific heat flow in the reservoir of The Hague. As expected, this results in a larger distribution width and hence, a larger, but more realistic uncertainty estimate. However, applying the constraining post-processing the uncertainty is again reduced to the level of the post-processing without stochastic boundary simulation. Thus, constraining post-processing is a suitable tool for reducing uncertainty estimates by observed state variables.},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}