@incollection{Lemke2016,
  author    = {Lemke, J{\"o}rg},
  title     = {Unfallverh{\"u}tung, Arbeits- und Gesundheitsschutz},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  edition   = {9., {\"u}berarb. und aktual. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02838-1 (Online)},
  doi       = {10.1007/978-3-658-02838-1_15},
  pages     = {1599 -- 1638},
  year      = {2016},
  abstract  = {Neben dem durch Unf{\"a}lle und Krankheiten entstehenden menschlichen Leids und der daraus resultierenden moralischen Verpflichtung, sich und seine Mitmenschen vor Schaden zu bewahren, ist der Arbeits- und Gesundheitsschutz auch ein Gebot wirtschaftlichen Handelns, da Arbeitsunf{\"a}lle und Berufskrankheiten Ausfallzeiten und Kosten verursachen. So geh{\"o}ren Arbeits- und Gesundheitsschutz zu den wichtigen Aufgaben eines Unternehmens.},
  language  = {de}
}
@inproceedings{KerpenBungValeroetal.2016,
  author    = {Kerpen, Nils B. and Bung, Daniel B. and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China},
  booktitle = {8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China},
  pages     = {6 Seiten},
  year      = {2016},
  language  = {en}
}
@inproceedings{BungValero2016,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow},
  series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  editor    = {Dewals, Benjamin},
  publisher = {CRC Press},
  isbn      = {978-1-138-02977-4},
  doi       = {10.1201/b21902-31},
  pages     = {151 -- 157},
  year      = {2016},
  language  = {en}
}
@article{RegerDoeringKuhnhenne2016,
  author    = {Reger, V. and D{\"o}ring, Bernd and Kuhnhenne, M.},
  title     = {Passive und aktive Maßnahmen zur Fl{\"a}chenk{\"u}hlung im Stahl(leicht)bau},
  series = {Bauingenieur},
  volume    = {91},
  journal   = {Bauingenieur},
  number    = {Jul/Aug},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  doi       = {10.37544/0005-6650-2016-07-08-63},
  pages     = {309 -- 316},
  year      = {2016},
  abstract  = {Mit steigenden D{\"a}mmstandards und h{\"o}heren Komfortanforderungen der Nutzer ger{\"a}t die Problematik der sommerlichen {\"U}berhitzung zunehmend in den Fokus. Um die {\"U}berhitzung m{\"o}glichst gering zu halten, sind Maßnahmen und L{\"o}sungen zu entwickeln, die den potenziellen K{\"u}hlbedarf eines Geb{\"a}udes vermeiden sowie reduzieren. Im Rahmen des europ{\"a}ischen Forschungsprojektes BATIMASS wurden Techniken untersucht, die die sommerliche Raumtemperatur ohne zus{\"a}tzliche K{\"u}hlung (passiv) oder aber mit energieeffizienter wasserbasierter Fl{\"a}chenk{\"u}hlung (aktiv) reduzieren und die besonders f{\"u}r Geb{\"a}ude in Stahl(leicht)bauweise geeignet sind. Daf{\"u}r wurde die Methodik der thermisch {\"a}quivalenten Decke weiterentwickelt, um das thermische Verhalten von Profilblechdecken in Geb{\"a}uden f{\"u}r beide L{\"o}sungsans{\"a}tze analysieren zu k{\"o}nnen. Dar{\"u}ber hinaus wurde der Einsatz von Phasenwechselmaterial (PCM) zur Steigerung der Speicherf{\"a}higkeit von leichten Decken mit besonders geringer thermischer Masse in Simulationen sowie im Labor untersucht und bewertet.},
  language  = {de}
}
@book{BleningerBrendaBungetal.2016,
  author    = {Bleninger, T. and Brenda, M. and Bung, Daniel B. and Hengl, M. and Schmid, B.H. and Schneider, E. and Sonnenburg, A. and Stoschek, O.},
  title     = {DWA-Regelwerk M 544-1 : Merkblatt: Ausbreitungsprobleme von Einleitungen - Prozesse, Methoden und Modelle - Teil 1: Anwendungsgrundlagen, Sch{\"a}tzformeln und eindimensionale Modelle},
  address   = {Hennef},
  organization    = {DWA, Deutsche Vereinigung f{\"u}r Wasserwirtschaft, Abwasser und Abfall e.V.},
  isbn      = {978-3-88721-280-3},
  pages     = {59 Seiten},
  year      = {2016},
  language  = {de}
}
@inproceedings{ValeroBungOertel2016,
  author    = {Valero, Daniel and Bung, Daniel B. and Oertel, M.},
  title     = {Turbulent dispersion in bounded horizontal jets : RANS capabilities and physical modeling comparison},
  series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  editor    = {Dewals, Benjamin},
  publisher = {CRC Press},
  isbn      = {978-1-138-02977-4},
  doi       = {10.1201/b21902-13},
  pages     = {49 -- 55},
  year      = {2016},
  language  = {en}
}
@techreport{SansomLawsonTuchoetal.2016,
  author    = {Sansom, M. and Lawson, R.M. and Tucho, R. and Kendrick, C. and Ogden, R. and Resalati, S. and Garay, R. and D{\"o}ring, Bernd and Reger, V. and Gilbert, J. and Heikkinen, J. and Hemmila, K.},
  title     = {Building in active thermal mass into steel structures (BATIMASS) - EUR 28166EN},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-63176-4},
  issn      = {1831-9424},
  doi       = {10.2777/25999},
  pages     = {147 Seiten},
  year      = {2016},
  abstract  = {The main objective of the BATIMASS project was to address how the energy balance in relatively lightweight steel buildings can be improved by building in 'active thermal mass' (ATM) into the building fabric. This was achieved through concept design, dynamic thermal modelling and testing of a number of potentially viable systems and concepts. A significant programme of thermal simulation modelling was undertaken utilising the thermally equivalent slab (TES) concept to model the passive thermal capacity effect of profiled, composite metal floor decks. It is apparent from the modelling results that thermal mass is a highly complex phenomenon which is highly dependent upon building type, occupancy patterns, climate and many other aspects of the building design and servicing strategy. The ATM systems developed, both conceptually and for prototype testing, focussed on water-cooled composite slabs, the Cofradal floor system and the phase change material (PCM) Energain. In addition to laboratory testing of prototypes, whole building monitoring was undertaken at the Kubik building in Spain and the RWTH test building in Germany. Advanced thermal modelling was also undertaken to estimate the likely benefits of the ATM concept designs developed and for comparison with the test results. In addition to thermal testing, structural tests were conducted on composite floor specimens incorporating embedded water pipes. This Final Report presents the results of the activities carried out under this RFCS contract RFSR CT 2012 00033. The work carried out is reported in six major sections corresponding to the technical Work Packages of the project. Only summaries of the work carried out are provided in this report; all work undertaken is fully reported in the formal project deliverables.},
  language  = {en}
}
@article{PyschnyDoeringFeldmann2014,
  author    = {Pyschny, D. and D{\"o}ring, Bernd and Feldmann, M.},
  title     = {Ermittlung der thermischen Leistungsf{\"a}higkeit des neuartigen multifunktionalen Verbunddeckensystems InaDeck},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  volume    = {89},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  number    = {3},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {116 -- 124},
  year      = {2014},
  language  = {de}
}
@techreport{LawsonBaddooVanieretal.2013,
  author    = {Lawson, R.M. and Baddoo, N.R. and Vanier, G. and D{\"o}ring, Bernd and Kuhnhenne, M. and Nieminen, J. and Beguin, P. and Herbin, S. and Caroli, G. and Adetunji, I. and Kozlowski, A.},
  title     = {Renovation of buildings using steel technologies (Robust) - EUR 25335},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-24950-1},
  issn      = {1831-9424},
  doi       = {10.2777/97860},
  pages     = {134 Seiten},
  year      = {2013},
  abstract  = {Robust addresses the renovation and improvement of existing residential, industrial and commercial buildings using steel-based technologies, focusing on techniques such as over-cladding, over-roofing and roof-top extensions. Steel-intensive renovation techniques currently on the market were reviewed. Performance criteria were developed for over-cladding systems meeting current regulatory standards, with guidelines on how to achieve appropriate levels of air-tightness.},
  language  = {en}
}
@techreport{FeldmannKuhnhenneDoeringetal.2013,
  author    = {Feldmann, M. and Kuhnhenne, M. and D{\"o}ring, Bernd and Pyschny, D. and Lawson, R.M. and Chuter, R.D. and Boudjabeur, S. and Lecomte-Labory, F. and Airaksinen, M. and Heikkinen, J. and Laamanen, J. and Albart, P. and D'Haeyer, R. and Chica, J.A. and Maseda, J.M. and Amundarain, A. and Rips, M.O. and Nu{\~n}ez, J.A. and Mac{\´i}as, O. and Beguin, P. and Ben Larbi, A.},
  title     = {Energy and thermal improvements for construction in steel (ETHICS) - EUR 26010},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-30789-8},
  issn      = {1831-9424},
  doi       = {10.2777/17106},
  pages     = {136 Seiten},
  year      = {2013},
  abstract  = {ETHICS is concerned with evaluating, measuring and making improvements in the thermal and energy performance of steel-clad and steel-framed buildings. It addresses basic building physics performance at a laboratory and full-scale level, and the preparation of design guidance for commercial, industrial and residential buildings. It includes the development of design tools to assist users in assessing whole-building performance, and calibrates these tools against whole-building measurements, which will be obtained from this research. Opportunities for renewable energy and other energy-saving features will be assessed. This project focuses on objectives that are of particular interest for the design of new steel constructions regarding energy efficiency. ETHICS investigates the as-built performance by on-site tests regarding air tightness and heat transfer properties of the building envelope and by monitoring the energy consumption and thermal comfort of selected up-to-date steel buildings. As energy efficiency is a key requirement for design and construction of buildings in the future, this project provides well-founded scientific data, which prove the high energy performance of current steel constructions and work out details for further improvements to maintain and extend the position of steel products in the construction sector.},
  language  = {en}
}