@techreport{FeldmannKuhnhenneDoeringetal.2013,
  author    = {Feldmann, M. and Kuhnhenne, M. and D{\"o}ring, Bernd and Pyschny, D. and Lawson, R.M. and Chuter, R.D. and Boudjabeur, S. and Lecomte-Labory, F. and Airaksinen, M. and Heikkinen, J. and Laamanen, J. and Albart, P. and D'Haeyer, R. and Chica, J.A. and Maseda, J.M. and Amundarain, A. and Rips, M.O. and Nu{\~n}ez, J.A. and Mac{\´i}as, O. and Beguin, P. and Ben Larbi, A.},
  title     = {Energy and thermal improvements for construction in steel (ETHICS) - EUR 26010},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-30789-8},
  issn      = {1831-9424},
  doi       = {10.2777/17106},
  pages     = {136 Seiten},
  year      = {2013},
  abstract  = {ETHICS is concerned with evaluating, measuring and making improvements in the thermal and energy performance of steel-clad and steel-framed buildings. It addresses basic building physics performance at a laboratory and full-scale level, and the preparation of design guidance for commercial, industrial and residential buildings. It includes the development of design tools to assist users in assessing whole-building performance, and calibrates these tools against whole-building measurements, which will be obtained from this research. Opportunities for renewable energy and other energy-saving features will be assessed. This project focuses on objectives that are of particular interest for the design of new steel constructions regarding energy efficiency. ETHICS investigates the as-built performance by on-site tests regarding air tightness and heat transfer properties of the building envelope and by monitoring the energy consumption and thermal comfort of selected up-to-date steel buildings. As energy efficiency is a key requirement for design and construction of buildings in the future, this project provides well-founded scientific data, which prove the high energy performance of current steel constructions and work out details for further improvements to maintain and extend the position of steel products in the construction sector.},
  language  = {en}
}
@techreport{KestiMononenLautsoetal.2015,
  author    = {Kesti, Jyrki and Mononen, Tarmo and Lautso, Petteri and D{\"o}ring, Bernd and Reger, Vitali and Holopainen, R. and Jung, N. and Shemeikka, J. and Nieminen, J. and Reda, F. and Lawson, Mark and Botti, Andrea and Hall, R. and Zold, A. and Buday, T.},
  title     = {Zero energy solutions for multifunctional steel intensive commercial buildings (ZEMUSIC) - EUR 27627},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-54071-4},
  issn      = {1831-9424},
  doi       = {10.2777/111520},
  pages     = {146 Seiten},
  year      = {2015},
  abstract  = {The broad commercial objective of this project was the sustainable value creation in steel building technology by addressing the ways in which significant energy reductions can be made in the operation phase of multi-storey commercial buildings. A review on energy efficient commercial buildings in Europe has been carried out consisting of several case studies from different countries. The project included development of zero-energy concepts for reducing energy demand as well as concepts for heating, cooling and ventilation systems by utilising renewable energy sources in three different climates. Also alternative structural frame solutions were developed and analyzed in respect of structural and MEP (mechanical, electrical and plumbing solutions) features. An innovative long span floor system with integrated MEP routings promises a cost effective alternative for sophisticated ventilation distribution and radiant heating and cooling systems, allowing for high energy efficiency and high quality interior climate. The report includes also review of best architectural practices for integrated renewable energy solutions including different design strategies for building facades of zero energy buildings. Interesting results and design basis are also presented for steel energy pile concept, where structural foundation piles are utilized for ground energy harvesting. Life cycle cost calculations for near zero energy office building based on developed technologies show that a near zero energy construction is also profitable. The results and work methods of the project have been summarized in the form of design guidance that offers designers the knowledge gained in a form that can be easily understood.},
  language  = {en}
}
@article{PyschnyDoeringFeldmann2014,
  author    = {Pyschny, D. and D{\"o}ring, Bernd and Feldmann, M.},
  title     = {Ermittlung der thermischen Leistungsf{\"a}higkeit des neuartigen multifunktionalen Verbunddeckensystems InaDeck},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  volume    = {89},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen},
  number    = {3},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {116 -- 124},
  year      = {2014},
  language  = {de}
}
@incollection{FeldmannDoeringPyschny2016,
  author    = {Feldmann, M. and D{\"o}ring, Bernd and Pyschny, D.},
  title     = {Floor systems; Sustainabilty analyses and assessments of steel bridges},
  series = {Sustainable steel buildings : a practical guide for structures and envelopes},
  booktitle = {Sustainable steel buildings : a practical guide for structures and envelopes},
  publisher = {Wiley Blackwell},
  address   = {Chichester, West Sussex},
  isbn      = {978-1-118-74079-8 (PDF)},
  pages     = {198 -- 223},
  year      = {2016},
  language  = {en}
}
@article{HennesLaumann2021,
  author    = {Hennes, Philipp and Laumann, J{\"o}rg},
  title     = {Ansatz der Drehbehinderung aus Koppelpfetten mit d{\"u}nnwandigen kaltgeformten Z-Profilen},
  series = {Stahlbau},
  volume    = {90},
  journal   = {Stahlbau},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049},
  doi       = {10.1002/stab.202000104},
  pages     = {158 -- 168},
  year      = {2021},
  language  = {de}
}
@techreport{KlugeKirschBudach2022,
  author    = {Kluge, Katharina and Kirsch, Ansgar and Budach, Christoph},
  title     = {Digitale Lehre in der Geotechnik: Aktueller Stand und weitere Entwicklungen},
  series = {geotechntik},
  journal   = {geotechntik},
  number    = {Early View},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {0172-6145 (Print)},
  doi       = {10.1002/gete.202200013},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {Digitale Lehrmaterialien werden seit mehreren Jahren in den Hochschulen eingesetzt und er{\"o}ffnen ganz neue Wege zur Vermittlung des Lehrstoffs. Die Erstellung dieser Lehrmaterialien kann allerdings je nach Art und Qualit{\"a}t sehr zeitintensiv sein und f{\"u}r Lehrende einen großen Mehraufwand bedeuten. Im Rahmen eines Kooperationsprojekts zur Erstellung von Lehrvideos f{\"u}r geotechnische Feld- und Laborversuche haben die Autoren dieses Beitrags allerdings die Erfahrung gemacht, dass das gemeinsame, hochschul{\"u}bergreifende Erstellen von Lehrmaterialien viele Vorteile mit sich bringt. Dadurch inspiriert, f{\"u}hrten die Autoren dieses Berichts eine Umfrage unter den deutschsprachigen Geotechnik-Lehrst{\"u}hlen der (Technischen) Universit{\"a}ten und (Fach-)Hochschulen durch. Nach drei Semestern, in denen Lehrveranstaltungen an den Hochschulen aufgrund der Corona-Pandemie {\"u}berwiegend digital durchgef{\"u}hrt werden mussten, war es ein Ziel dieser Umfrage, den Bestand und den Einsatz digitaler Lehrmaterialien im Fachgebiet Geotechnik zu erheben. Ein weiteres Ziel war die Initiierung eines Netzwerks, in dem sich Geotechnik-Professorinnen und -Professoren zu Lehrthemen austauschen k{\"o}nnen und gemeinsam (digitale) Lehrmaterialien erstellen und nutzen. Der vorliegende Beitrag stellt das gemeinsame Lehrprojekt der Autoren vor, pr{\"a}sentiert die Ergebnisse der durchgef{\"u}hrten Umfrage und berichtet {\"u}ber die ersten Aktivit{\"a}ten des neuen Netzwerks.},
  language  = {de}
}
@article{GrossTimmer1998,
  author    = {Groß, Rolf Fritz and Timmer, H.},
  title     = {Energetische und betriebswirtschaftliche Bewertung von K{\"u}hlsystemen f{\"u}r K{\"u}hllager},
  series = {HLH. Heizung, L{\"u}ftung/Klima, Haustechnik},
  volume    = {49},
  journal   = {HLH. Heizung, L{\"u}ftung/Klima, Haustechnik},
  number    = {9},
  publisher = {Springer},
  address   = {D{\"u}sseldorf},
  issn      = {1436-5103},
  pages     = {74 -- 77},
  year      = {1998},
  language  = {de}
}
@incollection{ThulfautGrossRenz2000,
  author    = {Thulfaut, Christian and Groß, Rolf Fritz and Renz, Ulrich},
  title     = {Messwerterfassung und -auswertung mit LabView: Experimentelle Analyse der Mischungsg{\"u}te in Hybridzellenk{\"u}hlt{\"u}rmen},
  series = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  booktitle = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  editor    = {Jamal, Rahman and Jaschinski, Hans},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2789-4 (print)},
  pages     = {54 -- 60},
  year      = {2000},
  abstract  = {Zur K{\"u}hlung von Abw{\"a}rmestr{\"o}men aus Kraftwerksprozessen werden in zunehmenden Maße Hybridzellenk{\"u}hlt{\"u}rme mit Zwangskonvektion eingesetzt, deren wesentlicher Vorteil ihre geringe Bauh{\"o}he ist. Um bei derartigen K{\"u}hlt{\"u}rmen eine Sichtbehinderung oder Glatteisgef{\"a}hrdung durch bodennahen Nebel zu vermeiden, muss durch eine optimale Vermischung des Trocken- und Naßluftanteils gew{\"a}hrleistet sein, daß aus der K{\"u}hlturmkrone keine Nebelschwaden austreten. In Zusammenarbeit mit der Industrie betreibt der Lehrstuhl f{\"u}r W{\"a}rme{\"u}bertragung und Klimatechnik der RWTH Aachen einen Versuchsstand zur Erfassung der Mischungsg{\"u}te in Hybridzellenk{\"u}hlt{\"u}rmen. In maßstabsgerechter Nachbildung k{\"o}nnen dabei am Modell alle relevanten Einflußgr{\"o}ßen wie K{\"u}hlturmgeometrie, Gestaltung zus{\"a}tzlicher Mischeinbauten sowie die Betriebsparameter variiert werden. Mit Hilfe einer unter LabView 5.01 erstellten Software werden sowohl die l3etriebszust{\"u}ncle online {\"u}berwacht, als auch die ben{\"o}tigten Meßwerte zur Bestimmung der Mischungsg{\"u}te erfaßt. {\"U}ber die grafische Oberfl{\"a}che k{\"o}nnen s{\"a}mtliche Meßoptionen gesteuert sowie alle Meßdaten visualisiert und kontrolliert werden. In das LabView-Programm sind dar{\"u}ber hinaus Routinen zur Auswertung der Daten implementiert worden, die sowohl eine direkte Darstellung der Ergebnisse in Form von Diagrammen erm{\"o}glichen, als auch zur Weiterverarbeitung einen Datenexport in eine Microsoft- Excel-Tabelle vorsehen.},
  language  = {de}
}
@incollection{GrossThulfautRenz2000,
  author    = {Groß, Rolf Fritz and Thulfaut, Christian and Renz, Ulrich},
  title     = {On-Line Simulation mit LabView: Experimentelle und numerische Analyse homogener Gasphasenreaktionen aus Kraftwerksprozessen,},
  series = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  booktitle = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000},
  editor    = {Jamal, Rahman and Jaschinski, Hans},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2789-4 (print)},
  pages     = {103 -- 108},
  year      = {2000},
  abstract  = {The institute of heat transfer and air conditioning at the Aachen University of Technology operates several test facilities in order to investigate homogeneous and catalytical processes for the reduction of gaseous pollutants (e.g. nitrous oxide) of flue gases in a tempeature range up to 900°C. One test facility consists of a stainless steel reactor in which the influence of reducing additives can be investigated. The software tool, created with LabVIEW 5.01, offers the possibility to measure, visualize and control all relevant physical quantities and to gain a numerical solution of the problem by solving the one dimensional, steady state conservation equations.},
  language  = {de}
}
@techreport{ChristGrossRenz1998,
  author    = {Christ, Ansgar and Groß, Rolf Fritz and Renz, Ulrich},
  title     = {Str{\"o}mungs-, Filterkuchen- und Abreinigungsmodelle f{\"u}r Heißgasfilter, Teilvorhaben "Numerische Simulation des Abreinigungsvorganges und der Rohgasstr{\"o}mung"},
  doi       = {10.2314/GBV:50431601X},
  pages     = {117 Seiten},
  year      = {1998},
  language  = {de}
}