@inproceedings{KasparGroebelKuperjansetal.2013,
  author    = {Kaspar, K. and Groebel, Simone and Kuperjans, Isabel and Dielmann, Klaus-Peter and Selmer, Thorsten},
  title     = {Charakterisierung der Bioz{\"o}nose von Biogasfermentern in Abh{\"a}ngigkeit verschiedener Substrate},
  series = {Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabr{\"u}ck, Tagungsband},
  booktitle = {Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabr{\"u}ck, Tagungsband},
  publisher = {Profair Consult+Project},
  address   = {Hildesheim},
  issn      = {978-3-9813776-3-7},
  pages     = {69 -- 74},
  year      = {2013},
  language  = {de}
}
@inproceedings{KarvanekButenwegEbenau2002,
  author    = {Karvanek, Eva and Butenweg, Christoph and Ebenau, Carsten},
  title     = {Bautechnische Pr{\"u}fung und Bau{\"u}berwachung der Arena „Auf Schalke"},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 8 am 21. und 22. M{\"a}rz 2002 in Braunschweig / Hrsg. Dieter Dinkler},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 8 am 21. und 22. M{\"a}rz 2002 in Braunschweig / Hrsg. Dieter Dinkler},
  publisher = {TU Braunschweig, Institut f{\"u}r Statik},
  address   = {Braunschweig},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2002, Braunschweig>},
  isbn      = {3-926031-95-6},
  pages     = {237 -- 245},
  year      = {2002},
  language  = {de}
}
@inproceedings{KarimiButenwegToll2005,
  author    = {Karimi, Iman and Butenweg, Christoph and Toll, Britta},
  title     = {Vulnerability assessment of industrial facilities},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.34},
  pages     = {34, 73 -- 75},
  year      = {2005},
  language  = {en}
}
@inproceedings{KalkerTollHolleretal.2004,
  author    = {Kalker, Ines and Toll, B. and Holler, Stefan and Butenweg, Christoph and Topping, B. H. V. and Mota Soares, C. A.},
  title     = {Capacity analysis of textile retrofitted unreinforced masonry},
  series = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <7, 2004, Lissabon>},
  isbn      = {0-948749-95-4},
  doi       = {10.4203/ccp.79.194},
  pages     = {431 -- 432},
  year      = {2004},
  language  = {en}
}
@inproceedings{KalkerNeumannButenwegetal.2005,
  author    = {Kalker, Ines and Neumann, M. and Butenweg, Christoph and Holler, Stefan},
  title     = {Modelling of textile strengthened masonry},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.184},
  pages     = {447 -- 448},
  year      = {2005},
  language  = {en}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@article{JungbluthBorchert2008,
  author    = {Jungbluth, Christian and Borchert, J{\"o}rg},
  title     = {M{\"o}glichkeiten der Strompreisbeeinflussung im oligopolistischen Markt},
  series = {ZNER Zeitschrift f{\"u}r Neues Energierecht},
  journal   = {ZNER Zeitschrift f{\"u}r Neues Energierecht},
  number    = {4},
  pages     = {314 -- 323},
  year      = {2008},
  language  = {de}
}
@incollection{JordanKatzPieper2021,
  author    = {Jordan, Frank and Katz, Christiane and Pieper, Martin},
  title     = {Online-Kollaboration in der Mathematik: Ein Design-Based-Research-Projekt},
  series = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen},
  booktitle = {Forschungsimpulse f{\"u}r hybrides Lehren und Lernen an Hochschulen},
  publisher = {TH K{\"o}ln},
  address   = {K{\"o}ln},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:832-cos4-9465},
  pages     = {245 -- 261},
  year      = {2021},
  abstract  = {Die Studie er{\"o}rtert anhand eines Fallbeispiels aus der Mathematik f{\"u}r Ingenieur*innen, wie didaktische Gestaltungsprinzipien f{\"u}r Soziale Pr{\"a}senz, Kollaboration und das L{\"o}sen von praxisnahen Problemen mit mathematischem Denken in einer Online-Umgebung aussehen k{\"o}nnen. Hierf{\"u}r zieht der Beitrag den forschungsmethodologischen Rahmen Design-Based Research (DBR) hinzu und berichtet {\"u}ber Zwischenergebnisse. DBR wird an dieser Stelle als eine systematische Herangehensweise an kurzfristige Lehrver{\"a}nderungen und als Chance auf dem Weg zu einer neuen Hochschullehre nach der COVID-19-Pandemie dargestellt, die theoretische und empirische Erkenntnisse mit Praxisverkn{\"u}pfung und -relevanz vereint.},
  language  = {de}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@article{JellinghausGoettscheHoffschmidt2006,
  author    = {Jellinghaus, Sabine and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard},
  title     = {Beleuchtung mit gesteuertem Farblicht - Bewertung eines Prototypen},
  series = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  journal   = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  publisher = {OTTI, Bereich Erneuerbare Energien},
  address   = {Regensburg},
  isbn      = {3-934681-43-3},
  pages     = {89 -- 93},
  year      = {2006},
  language  = {de}
}