@inproceedings{SchopenKemperEsch2021,
  author    = {Schopen, Oliver and Kemper, Hans and Esch, Thomas},
  title     = {Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC},
  series = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  booktitle = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  publisher = {FH Joanneum},
  address   = {Graz},
  isbn      = {978-3-902103-94-9},
  pages     = {45 -- 46},
  year      = {2021},
  abstract  = {In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device.},
  language  = {en}
}
@inproceedings{FunkeHajAyedKustereretal.2014,
  author    = {Funke, Harald and Haj Ayed, A. and Kusterer, K. and Keinz, Jan and Kazari, M. and Kitajima, J. and Horikawa, A. and Okada, K.},
  title     = {Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle},
  series = {Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : D{\"u}sseldorf, Germany, June 16-20, 2014 ; Vol. 4A)},
  booktitle = {Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : D{\"u}sseldorf, Germany, June 16-20, 2014 ; Vol. 4A)},
  publisher = {ASME},
  address   = {New York, N.Y.},
  isbn      = {978-0-7918-4568-4},
  pages     = {V04AT04A057},
  year      = {2014},
  language  = {en}
}
@inproceedings{HagebeukerRingbeckFrydlewiczetal.2007,
  author    = {Hagebeuker, Bianca and Ringbeck, Thorsten and Frydlewicz, Paul and Jesorsky, Oliver and S{\"u}nkel, Thomas},
  title     = {PMD-Sensoren als Schl{\"u}sselkomponenten f{\"u}r die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums},
  series = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg},
  booktitle = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg},
  editor    = {Grote, Caspar},
  publisher = {WEKA-Fachzeitschr.-Verl.},
  address   = {Poing},
  pages     = {287 -- 296},
  year      = {2007},
  language  = {en}
}
@inproceedings{GrothofSchwarteBuxbaumetal.2002,
  author    = {Grothof, M. and Schwarte, Rudolf and Buxbaum, Bernd and Ringbeck, Thorsten},
  title     = {Product monitoring with MSM-PMD-Array},
  series = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques},
  booktitle = {Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors \& Measuring Techniques},
  editor    = {Wagner, Elmar},
  publisher = {AMA Service GmbH},
  address   = {Wunsdorf},
  pages     = {41 -- 47},
  year      = {2002},
  language  = {en}
}
@inproceedings{BuxbaumSchwarteRingbecketal.2001,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and Grothof, Markus and Sluiter, A. and Frey, Jochen and Hildebrand, M. and David, Klaus},
  title     = {Wireless LAN based on optical CDMA using a new high-speed correlation receiver (MSM-PMD)},
  series = {Optical wireless communications IV : 21-22 August, 2001, Denver, USA. - (SPIE proceedings series ; 4530)},
  booktitle = {Optical wireless communications IV : 21-22 August, 2001, Denver, USA. - (SPIE proceedings series ; 4530)},
  editor    = {Korevaar, Eric John},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-4254-2},
  doi       = {10.1117/12.449808},
  pages     = {168 -- 178},
  year      = {2001},
  language  = {en}
}
@inproceedings{KoetterDeckerDetzleretal.2012,
  author    = {K{\"o}tter, Jens and Decker, Stefan and Detzler, Raphael and Sch{\"a}fer, Jochen and Schmitz, Mark and Herrmann, Ulf},
  title     = {Cost Reduction of Solar Fields with HelioTrough Collector},
  publisher = {FLAGSOL},
  address   = {K{\"o}ln},
  pages     = {9 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{NoetzoldUphuesWegeneretal.2013,
  author    = {N{\"o}tzold, K. and Uphues, A. and Wegener, R. and Fink, K. and Bragard, Michael and Griessel, R. and Soter, S.},
  title     = {Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter},
  series = {15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]},
  booktitle = {15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-0115-9 (Online-Ausg.)},
  doi       = {10.1109/EPE.2013.6634752},
  pages     = {1037 -- 1042},
  year      = {2013},
  language  = {en}
}
@inproceedings{AjonaHerrmannSperdutoetal.1996,
  author    = {Ajona, J. I. and Herrmann, Ulf and Sperduto, F. and Farinha-Mendes, J.},
  title     = {Main Achievements within ARDISS (Advanced Receiver for Direct Solar Steam Production in Parabolic Trough Solar Power Plants) Project},
  series = {Components, tools, facilities and measurement techniques. - (Solar thermal concentrating technologies : proceedings of the 8th international symposium, October, 6 - 11, 1996, K{\"o}ln, Germany ; Vol. 2)},
  booktitle = {Components, tools, facilities and measurement techniques. - (Solar thermal concentrating technologies : proceedings of the 8th international symposium, October, 6 - 11, 1996, K{\"o}ln, Germany ; Vol. 2)},
  editor    = {Becker, Manfred},
  publisher = {M{\"u}ller},
  address   = {Heidelberg},
  isbn      = {3-7880-7616-X},
  pages     = {733 -- 754},
  year      = {1996},
  language  = {en}
}
@inproceedings{BayerHeschelerArtmannetal.2019,
  author    = {Bayer, Robin and Hescheler, J{\"u}rgen and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Treating arterial hypertension in a cell culture well},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {5 -- 6},
  year      = {2019},
  abstract  = {Hypertension describes the pathological increase of blood pressure, which is most commonly associated with the increase of vascular wall stiffness [1]. Referring to the "Deutsche Bluthochdruck Liga" this pathology shows a growing trend in our aging society. In order to find novel pharmacological and probably personalized treatments, we want to present a functional approach to study biomechanical properties of a human aortic vascular model. In this method review we will give an overview of recent studies which were carried out with the CellDrum technology [2] and underline the added value to already existing standard procedures known from the field of physiology. Herein described CellDrum technology is a system to measure functional mechanical properties of cell monolayers and thin tissue constructs in-vitro. Additionally, the CellDrum enables to elucidate the mechanical response of cells to pharmacological drugs, toxins and vasoactive agents. Due to its highly flexible polymer support, cells can also be mechanically stimulated by steady and cyclic biaxial stretching.},
  language  = {en}
}
@inproceedings{EllerwegRitz2008,
  author    = {Ellerweg, Roland and Ritz, Thomas},
  title     = {Tool supported requirements analysis for the user centered development of mobile enterprise software},
  series = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  booktitle = {Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands},
  editor    = {Roth, J{\"o}rg},
  publisher = {IADIS Press},
  address   = {[Lisboa]},
  isbn      = {978-972-8924-62-1},
  pages     = {160 -- 162},
  year      = {2008},
  abstract  = {A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.},
  language  = {en}
}