@inproceedings{HandschuhStollenwerkBorchert2021,
  author    = {Handschuh, Nils and Stollenwerk, Dominik and Borchert, J{\"o}rg},
  title     = {Operation of thermal storage power plants under high renewable grid penetration},
  series = {NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems},
  booktitle = {NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-5651-3},
  pages     = {261 -- 265},
  year      = {2021},
  abstract  = {The planned coal phase-out in Germany by 2038 will lead to the dismantling of power plants with a total capacity of approx. 30 GW. A possible further use of these assets is the conversion of the power plants to thermal storage power plants; the use of these power plants on the day-ahead market is considerably limited by their technical parameters. In this paper, the influence of the technical boundary conditions on the operating times of these storage facilities is presented. For this purpose, the storage power plants were described as an MILP problem and two price curves, one from 2015 with a relatively low renewable penetration (33 \%) and one from 2020 with a high renewable energy penetration (51 \%) are compared. The operating times were examined as a function of the technical parameters and the critical influencing factors were investigated. The thermal storage power plant operation duration and the energy shifted with the price curve of 2020 increases by more than 25 \% compared to 2015.},
  language  = {en}
}
@inproceedings{HardtAbdelGawadMartinetal.1975,
  author    = {Hardt, Arno and Abdel-Gawad, A and Martin, S. and Reich, J.},
  title     = {Design procedures for the Juelich QQDDQ high resolution spectrometer},
  series = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  booktitle = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  pages     = {45 -- 51},
  year      = {1975},
  language  = {en}
}
@article{HardtBisplinghoffErnstetal.1977,
  author    = {Hardt, Arno and Bisplinghoff, J. and Ernst, J. and L{\"o}hr, R.},
  title     = {On-line apparatus BANDIT for half-life determination of short-lived neutron deficient isotopes. A. Hardt, J. Bisplinghoff, J. Ernst, R. L{\"o}hr, H. Machner, T . Mayer-Kuckuk},
  series = {Nuclear Instruments and Methods. 143 (1977), H. 3},
  journal   = {Nuclear Instruments and Methods. 143 (1977), H. 3},
  isbn      = {0029-554X},
  pages     = {519 -- 523},
  year      = {1977},
  language  = {en}
}
@article{HardtKoehlerMuelleretal.1980,
  author    = {Hardt, Arno and K{\"o}hler, M. and M{\"u}ller, K. D. and Stoff, H.},
  title     = {A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the J{\"u}lich Cyclotron "JULIC". M. K{\"o}hler, K. D. M{\"u}ller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-B{\"o}ricke , J. Meißburger},
  series = {Nuclear Instruments and Methods. 75 (1980), H. 2-3},
  journal   = {Nuclear Instruments and Methods. 75 (1980), H. 2-3},
  isbn      = {0029-554X},
  pages     = {357 -- 362},
  year      = {1980},
  language  = {en}
}
@article{HardtMartinMeissburgeretal.1978,
  author    = {Hardt, Arno and Martin, S. and Meißburger, J. and Retz, R. and Wimmer, J.},
  title     = {The cryopump system of the QQDDQ magnet spectrometer BIG KARL},
  series = {Vacuum},
  volume    = {28},
  journal   = {Vacuum},
  number    = {10-11},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2715 (E-Journal); 0042-207X (Print)},
  doi       = {10.1016/S0042-207X(78)80026-8},
  pages     = {483},
  year      = {1978},
  abstract  = {Cryopumps without liquid nitrogen shielding are used to provide a vacuum of 10-6 torr in the spectrometer. The vacuum system is subdivided in three sections that can be separated by valves. The first section (scattering chamber) has a volume of 60 l, two rotation transmissions with 35 cm dia and a sliding seal that allows a rotation of 160° without deteriorating the vacuum. The second section includes the vacuum chambers inside the magnets with 6 × 80 cm cross-section and a length of 1200 cm. The third section (detector box) has a volume of 4300 l and contains a moveable detector system. The gas inside the detector with a pressure of 760 torr is separated from the vacuum by a 15 μm mylar foil with an area of 300 cm2. The detector box can be valved off by a valve with the dimension of 10 × 100 cm. The layout of system is given. The instrumentation and the interlock system are described. First experiences with this system are presented.},
  language  = {en}
}
@inproceedings{HartungDilgerHellmannsetal.2009,
  author    = {Hartung, I. and Dilger, Klaus and Hellmanns, Mark and B{\"o}hme, Stefan},
  title     = {Repair of non-weldable steel structures to extend the life cycle},
  series = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)},
  booktitle = {Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  organization    = {International Institute of Welding},
  isbn      = {978-981-08-3259-9},
  pages     = {569 -- 574},
  year      = {2009},
  language  = {en}
}
@article{HeelDiktaBraekers2021,
  author    = {Heel, Mareike van and Dikta, Gerhard and Braekers, Roel},
  title     = {Bootstrap based goodness‑of‑fit tests for binary multivariate regression models},
  series = {Journal of the Korean Statistical Society},
  volume    = {51},
  journal   = {Journal of the Korean Statistical Society},
  publisher = {Springer Nature},
  address   = {Singapur},
  issn      = {2005-2863 (Online)},
  doi       = {10.1007/s42952-021-00142-4},
  pages     = {28 Seiten},
  year      = {2021},
  abstract  = {We consider a binary multivariate regression model where the conditional expectation of a binary variable given a higher-dimensional input variable belongs to a parametric family. Based on this, we introduce a model-based bootstrap (MBB) for higher-dimensional input variables. This test can be used to check whether a sequence of independent and identically distributed observations belongs to such a parametric family. The approach is based on the empirical residual process introduced by Stute (Ann Statist 25:613-641, 1997). In contrast to Stute and Zhu's approach (2002) Stute \& Zhu (Scandinavian J Statist 29:535-545, 2002), a transformation is not required. Thus, any problems associated with non-parametric regression estimation are avoided. As a result, the MBB method is much easier for users to implement. To illustrate the power of the MBB based tests, a small simulation study is performed. Compared to the approach of Stute \& Zhu (Scandinavian J Statist 29:535-545, 2002), the simulations indicate a slightly improved power of the MBB based method. Finally, both methods are applied to a real data set.},
  language  = {en}
}
@inproceedings{HellmannsBoehmDilger2008,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Weight and noise reduction in power transmissions through epoxy resin foams},
  series = {Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas},
  booktitle = {Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas},
  publisher = {Adhesion Society},
  address   = {Blacksburg},
  organization    = {Adhesion Society},
  pages     = {291 -- 293},
  year      = {2008},
  language  = {en}
}
@inproceedings{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control},
  series = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida},
  booktitle = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida},
  publisher = {Adhesion Society},
  address   = {Blacksburg, Va.},
  organization    = {Adhesion Society},
  issn      = {1086-9506},
  pages     = {68 -- 70},
  year      = {2006},
  language  = {en}
}
@article{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Manual applications of adhesives},
  series = {Journal of adhesion and interface},
  volume    = {Vol. 7},
  journal   = {Journal of adhesion and interface},
  number    = {No. 4},
  pages     = {24 -- 27},
  year      = {2006},
  language  = {en}
}