@inproceedings{Butenweg2022,
  author    = {Butenweg, Christoph},
  title     = {Seismic design and evaluation of industrial facilities},
  series = {Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology - Bucharest, 2022},
  booktitle = {Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology - Bucharest, 2022},
  editor    = {Vacareanu, Radu and Ionescu, Constantin},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-15103-3},
  issn      = {2524-342X},
  doi       = {10.1007/978-3-031-15104-0},
  pages     = {449 -- 464},
  year      = {2022},
  abstract  = {Industrial facilities must be thoroughly designed to withstand seismic actions as they exhibit an increased loss potential due to the possibly wideranging damage consequences and the valuable process engineering equipment. Past earthquakes showed the social and political consequences of seismic damage to industrial facilities and sensitized the population and politicians worldwide for the possible hazard emanating from industrial facilities. However, a holistic approach for the seismic design of industrial facilities can presently neither be found in national nor in international standards. The introduction of EN 1998-4 of the new generation of Eurocode 8 will improve the normative situation with specific seismic design rules for silos, tanks and pipelines and secondary process components. The article presents essential aspects of the seismic design of industrial facilities based on the new generation of Eurocode 8 using the example of tank structures and secondary process components. The interaction effects of the process components with the primary structure are illustrated by means of the experimental results of a shaking table test of a three story moment resisting steel frame with different process components. Finally, an integrated approach of digital plant models based on building information modelling (BIM) and structural health monitoring (SHM) is presented, which provides not only a reliable decision-making basis for operation, maintenance and repair but also an excellent tool for rapid assessment of seismic damage.},
  language  = {en}
}
@inproceedings{Butenweg2021,
  author    = {Butenweg, Christoph},
  title     = {Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies},
  series = {Civil Engineering 2021 - Achievements and Visions: Proceedings of the International Conferenecs celebrating 175th Anniversary of the Faculty of Civil Engineering, University of Belgrade, October 25 - 26, 2021 Belgrade, Serbia},
  booktitle = {Civil Engineering 2021 - Achievements and Visions: Proceedings of the International Conferenecs celebrating 175th Anniversary of the Faculty of Civil Engineering, University of Belgrade, October 25 - 26, 2021 Belgrade, Serbia},
  editor    = {Kuzmanović, Vladan and Ignjatović, Ivan},
  publisher = {University of Belgrade},
  address   = {Belgrade},
  year      = {2021},
  language  = {en}
}
@inproceedings{ButenwegBettziecheKuhlmannetal.2005,
  author    = {Butenweg, Christoph and Bettzieche, Volker and Kuhlmann, Wolfram and Meskouris, Konstantin},
  title     = {Die baudynamische Beurteilung von Talsperren am Beispiel der F{\"u}rwiggetalsperre},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  publisher = {Inst. f{\"u}r Statik und Dynamik der Tragwerke},
  address   = {Dresden},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2005, Dresden>},
  isbn      = {3-00-015456-6},
  pages     = {73 -- 84},
  year      = {2005},
  language  = {de}
}
@inproceedings{ButenwegBursiNardinetal.2021,
  author    = {Butenweg, Christoph and Bursi, Oreste S. and Nardin, Chiara and Lanese, Igor and Pavese, Alberto and Marinković, Marko and Paolacci, Fabrizio and Quinci, Gianluca},
  title     = {Experimental investigation on the seismic performance of a multi-component system for major-hazard industrial facilities},
  series = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021},
  booktitle = {Pressure Vessels \& Piping Virtual Conference July 13-15, 2021},
  publisher = {American Society of Mechanical Engineers (ASME)},
  address   = {New York},
  isbn      = {9780791885352},
  doi       = {10.1115/PVP2021-61696},
  pages     = {8 Seiten},
  year      = {2021},
  abstract  = {Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi-Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behaviour of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behaviour of the test structure and of its relative several installations is investigated. Furthermore, both process components and primary structure interactions are considered and analyzed. Several PGA-scaled artificial ground motions are applied to study the seismic response at different levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the experimental setup of the investigated structure and installations, selected measurement data and describes the obtained damage. Furthermore, important findings for the definition of performance limits, the effectiveness of floor response spectra in industrial facilities will be presented and discussed.},
  language  = {en}
}
@inproceedings{ButenwegGajewskiThierauf1999,
  author    = {Butenweg, Christoph and Gajewski, R. and Thierauf, Georg},
  title     = {A practical approach for the optimum design of reinforced concrete structures},
  series = {Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping},
  booktitle = {Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Edinburgh},
  organization    = {Euro-Conference on Parallel and Distributed Computing for Computational Mechanics <3, 1999, Weimar>},
  isbn      = {0-94-8749-59-8},
  pages     = {245 -- 250},
  year      = {1999},
  language  = {en}
}
@inproceedings{ButenwegGellert2008,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Displacement based design of masonry structures},
  series = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  booktitle = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  publisher = {University of Newcastle},
  address   = {Callaghan},
  organization    = {International Brick and Block Masonry Conference <14, 2008, Sydney>},
  isbn      = {978-19-2070-1-92-5},
  pages     = {1 -- 10},
  year      = {2008},
  language  = {en}
}
@inproceedings{ButenwegGellertMeskouris2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meskouris, Konstantin},
  title     = {Ein neuer Ansatz zum Nachweis von Mauerwerksbauten},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. M{\"a}rz 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut f{\"u}r Baustatik, Universit{\"a}t Karlsruhe (TH)},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. M{\"a}rz 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut f{\"u}r Baustatik, Universit{\"a}t Karlsruhe (TH)},
  publisher = {Inst. f{\"u}r Baustatik, Univ. Karlsruhe (TH)},
  address   = {Karlsruhe},
  organization    = {Fachtagung Baustatik - Baupraxis <10, 2008, Karlsruhe>},
  isbn      = {978-3-935322-14-0},
  pages     = {103 -- 116},
  year      = {2008},
  language  = {de}
}
@inproceedings{ButenwegGellertReindl2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas},
  title     = {Capacity design of masonry buildings under cyclic loading},
  series = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  booktitle = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  publisher = {Editions de l'Universit{\´e} de Li{\`e}ge},
  address   = {Li{\`e}ge},
  organization    = {Belgian Seismic Group},
  isbn      = {978-2-87456-063-7},
  pages     = {201 -- 208},
  year      = {2008},
  language  = {en}
}
@inproceedings{ButenwegHoltschoppen2014,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of industrial facilities in Germany},
  series = {Seismic Design of Industrial Facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) : Aachen, 26. - 27.9.2013},
  booktitle = {Seismic Design of Industrial Facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) : Aachen, 26. - 27.9.2013},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02809-1 ; 3-658-02809-2 (Print) ; 978-3-658-02810-7 (E-Book)},
  doi       = {10.1007/978-3-658-02810-7_6},
  pages     = {63 -- 74},
  year      = {2014},
  language  = {de}
}
@inproceedings{ButenwegKleemannAltay2013,
  author    = {Butenweg, Christoph and Kleemann, Anne and Altay, Okyay},
  title     = {Simulation von Impact Belastungen auf Stahlbetonstrukturen},
  series = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  booktitle = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  organization    = {D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik <13, 2013, Wien>},
  pages     = {1 -- 9},
  year      = {2013},
  language  = {de}
}