@incollection{MoorkampPetersonUibel2023,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Standardholzbr{\"u}cken f{\"u}r kommunale Geh- und Radwege},
  series = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  booktitle = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  editor    = {Wehren, Cedric},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-95886-500-6},
  pages     = {140 -- 165},
  year      = {2023},
  language  = {de}
}
@article{MoraisSumanSchoeningetal.2023,
  author    = {Morais, Paulo V. and Suman, Pedro H. and Sch{\"o}ning, Michael Josef and Siqueira Junior, Jos{\´e} R. and Orlandi, Marcelo O.},
  title     = {Layer-by-layer film based on Sn₃O₄ nanobelts as sensing units to detect heavy metals using a capacitive field-effect sensor platform},
  series = {Chemosensors},
  volume    = {11},
  journal   = {Chemosensors},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors11080436},
  pages     = {Artikel 436},
  year      = {2023},
  abstract  = {Lead and nickel, as heavy metals, are still used in industrial processes, and are classified as "environmental health hazards" due to their toxicity and polluting potential. The detection of heavy metals can prevent environmental pollution at toxic levels that are critical to human health. In this sense, the electrolyte-insulator-semiconductor (EIS) field-effect sensor is an attractive sensing platform concerning the fabrication of reusable and robust sensors to detect such substances. This study is aimed to fabricate a sensing unit on an EIS device based on Sn₃O₄ nanobelts embedded in a polyelectrolyte matrix of polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) using the layer-by-layer (LbL) technique. The EIS-Sn₃O₄ sensor exhibited enhanced electrochemical performance for detecting Pb²⁺ and Ni²⁺ ions, revealing a higher affinity for Pb²⁺ ions, with sensitivities of ca. 25.8 mV/decade and 2.4 mV/decade, respectively. Such results indicate that Sn₃O₄ nanobelts can contemplate a feasible proof-of-concept capacitive field-effect sensor for heavy metal detection, envisaging other future studies focusing on environmental monitoring.},
  language  = {en}
}
@article{MuesgenanntKoersMcNeilRadchenkoetal.2023,
  author    = {Mues genannt Koers, Lucas and McNeil, S. W. and Radchenko, V. and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Production of Co-58m in a siphon-style liquid target on a medical cyclotron},
  volume    = {195},
  number    = {Art. 110734},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2023.110734},
  year      = {2023},
  abstract  = {We present the production of 58mCo on a small, 13 MeV medical cyclotron utilizing a siphon style liquid target system. Different concentrated iron(III)-nitrate solutions of natural isotopic distribution were irradiated at varying initial pressures and subsequently separated by solid phase extraction chromatography. The radio cobalt (58m/gCo and 56Co) was successfully produced with saturation activities of (0.35 ± 0.03) MBq μA-1 for 58mCo with a separation recovery of (75 ± 2) \% of cobalt after one separation step utilizing LN-resin.},
  language  = {en}
}
@article{MuesgenanntKoersPrevostPaulssenetal.2023,
  author    = {Mues genannt Koers, Lucas and Prevost, David and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Density reduction effects on the production of [11C]CO2 in Nb-body targets on a medical cyclotron},
  volume    = {199},
  number    = {Art. 110911},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.apradiso.2023.110911},
  year      = {2023},
  abstract  = {Medical isotope production of 11C is commonly performed in gaseous targets. The power deposition of the proton beam during the irradiation decreases the target density due to thermodynamic mixing and can cause an increase of penetration depth and divergence of the proton beam. In order to investigate the difference how the target-body length influences the operation conditions and the production yield, a 12 cm and a 22 cm Nb-target body containing N2/O2 gas were irradiated using a 13 MeV proton cyclotron. It was found that the density reduction has a large influence on the pressure rise during irradiation and the achievable radioactive yield. The saturation activity of [11C]CO2 for the long target (0.083 Ci/μA) is about 10\% higher than in the short target geometry (0.075 Ci/μA).},
  language  = {en}
}
@inproceedings{MulsowHuelsenGuetzlaffetal.2023,
  author    = {Mulsow, Niklas A. and H{\"u}lsen, Benjamin and G{\"u}tzlaff, Joel and Spies, Leon and Bresser, Andreas and Dabrowski, Adam and Czupalla, Markus and Kirchner, Frank},
  title     = {Concept and design of an autonomous micro rover for long term lunar exploration},
  series = {Proceedings of the 74th International Astronautical Congress},
  booktitle = {Proceedings of the 74th International Astronautical Congress},
  publisher = {dfki},
  address   = {Saarbr{\"u}cken},
  pages     = {13 Seiten},
  year      = {2023},
  abstract  = {Research on robotic lunar exploration has seen a broad revival, especially since the Google Lunar X-Prize increasingly brought private endeavors into play. This development is supported by national agencies with the aim of enabling long-term lunar infrastructure for in-situ operations and the establishment of a moon village. One challenge for effective exploration missions is developing a compact and lightweight robotic rover to reduce launch costs and open the possibility for secondary payload options. Existing micro rovers for exploration missions are clearly limited by their design for one day of sunlight and their low level of autonomy. For expanding the potential mission applications and range of use, an extension of lifetime could be reached by surviving the lunar night and providing a higher level of autonomy. To address this objective, the paper presents a system design concept for a lightweight micro rover with long-term mission duration capabilities, derived from a multi-day lunar mission scenario at equatorial regions. Technical solution approaches are described, analyzed, and evaluated, with emphasis put on the harmonization of hardware selection due to a strictly limited budget in dimensions and power.},
  language  = {en}
}
@article{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the influence of elasticity on propeller performance: a parametric study},
  series = {CEAS Aeronautical Journal},
  volume    = {14},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer Nature},
  address   = {Berlin},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-023-00649-y},
  pages     = {311 -- 323},
  year      = {2023},
  abstract  = {The aerodynamic performance of propellers strongly depends on their geometry and, consequently, on aeroelastic deformations. Knowledge of the extent of the impact is crucial for overall aircraft performance. An integrated simulation environment for steady aeroelastic propeller simulations is presented. The simulation environment is applied to determine the impact of elastic deformations on the aerodynamic propeller performance. The aerodynamic module includes a blade element momentum approach to calculate aerodynamic loads. The structural module is based on finite beam elements, according to Timoshenko theory, including moderate deflections. Several fixed-pitch propellers with thin-walled cross sections made of both isotropic and non-isotropic materials are investigated. The essential parameters are varied: diameter, disc loading, sweep, material, rotational, and flight velocity. The relative change of thrust between rigid and elastic blades quantifies the impact of propeller elasticity. Swept propellers of large diameters or low disc loadings can decrease the thrust significantly. High flight velocities and low material stiffness amplify this tendency. Performance calculations without consideration of propeller elasticity can lead to decreased efficiency. To avoid cost- and time-intense redesigns, propeller elasticity should be considered for swept planforms and low disc loadings.},
  language  = {en}
}
@inproceedings{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the determination of harmonic propeller loads},
  series = {AIAA SCITECH 2023 Forum},
  booktitle = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  doi       = {10.2514/6.2023-2404},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Dynamic loads significantly impact the structural design of propeller blades due to fatigue and static strength. Since propellers are elastic structures, deformations and aerodynamic loads are coupled. In the past, propeller manufacturers established procedures to determine unsteady aerodynamic loads and the structural response with analytical steady-state calculations. According to the approach, aeroelastic coupling primarily consists of torsional deformations. They neglect bending deformations, deformation velocities, and inertia terms. This paper validates the assumptions above for a General Aviation propeller and a lift propeller for urban air mobility or large cargo drones. Fully coupled reduced-order simulations determine the dynamic loads in the time domain. A quasi-steady blade element momentum approach transfers loads to one-dimensional finite beam elements. The simulation results are in relatively good agreement with the analytical method for the General Aviation propeller but show increasing errors for the slender lift propeller. The analytical approach is modified to consider the induced velocities. Still, inertia and velocity proportional terms play a significant role for the lift propeller due to increased elasticity. The assumption that only torsional deformations significantly impact the dynamic loads of propellers is not valid. Adequate determination of dynamic loads of such designs requires coupled aeroelastic simulations or advanced analytical procedures.},
  language  = {en}
}
@masterthesis{Nahrings2023,
  type      = {Bachelor Thesis},
  author    = {Nahrings, Laura Aileen},
  title     = {Seamless Connection : die Integration eines smarten WLAN Routers in die Wohnumgebung},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {131 Seiten},
  year      = {2023},
  abstract  = {In Deutschland verf{\"u}gen mehr als 95 \% aller Haushalte {\"u}ber einen Internetzugang und das Interesse an Smart Home Anwendungen steigt. Je vernetzter das Zuhause wird, desto mehr Devices m{\"u}ssen dort ihren Platz finden. WLAN Router wirken durch ihre technische Designsprache meist wie Fremdk{\"o}rper im Raum, sodass oft versucht wird, sie zu verstecken. Das soll sich mit „Cobo", dem smarten WLAN Router, {\"a}ndern. Neben der Bereitstellung einer Internetanbindung wird er zum Hub f{\"u}r alle Smart Home Anwendungen. Als Herzst{\"u}ck des Zuhauses sorgt er f{\"u}r die Vernetzung aller Devices und schafft zudem eine Verbindung zwischen Technologie und Interior. Mit seinem minimalistischen Design und der gezielten Auswahl an Materialien und Farben f{\"u}gt sich der intelligente Router in die eigenen vier W{\"a}nde ein. „Cobo" ist kein WLAN Router, der im Schuhregal versteckt werden muss, denn er wird zum Teil der Einrichtung.},
  language  = {de}
}
@masterthesis{Namakiravesh2023,
  type      = {Bachelor Thesis},
  author    = {Namakiravesh, Ehsan},
  title     = {Coup{\´e} Nr. 13},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {25 Seiten},
  year      = {2023},
  abstract  = {Coup{\´e} Nr. 13 ist eine kurze Animation {\"u}ber ein Zugcoup{\´e} mit 6 individuellen Passagieren und den 5 Stufen der Kommunikationsentwicklung zwischen ihnen. Die Passagiere des "Coup{\´e} Nummer 13" werden zu ihrem wahren Ich, wenn sie sich gegenseitig die Kofferklappen {\"o}ffnen. Doch dieses Offen-Sein ist gar nicht so einfach. Es f{\"u}hlt sich anfangs verletzlich an, psychologisch nackt und meist {\"a}ngstlich. Aber diese Verletzlichkeit ist aus psychologischer Sicht der Schl{\"u}ssel zu engen Beziehungen. Wahre Verbundenheit entsteht nur, wenn man den Weg zur Schattenseite des anderen findet - indem man sie so sieht und annimmt, wie sie wirklich sind. In der Tat bewundern und respektieren wir meistens die Verletzlichkeit anderer Menschen. Wir sehen sie in der Regel als ein Zeichen von St{\"a}rke und Mut - nicht von Schw{\"a}che.},
  language  = {de}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}