@inproceedings{MoehringWulfhorstRothetal.2016,
  author    = {M{\"o}hring, S. and Wulfhorst, H. and Roth, J. and Tippk{\"o}tter, Nils},
  title     = {Pretreatment strategies for lignocellulosic biomass},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {131},
  year      = {2016},
  language  = {en}
}
@inproceedings{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the determination of harmonic propeller loads},
  series = {AIAA SCITECH 2023 Forum},
  booktitle = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  doi       = {10.2514/6.2023-2404},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Dynamic loads significantly impact the structural design of propeller blades due to fatigue and static strength. Since propellers are elastic structures, deformations and aerodynamic loads are coupled. In the past, propeller manufacturers established procedures to determine unsteady aerodynamic loads and the structural response with analytical steady-state calculations. According to the approach, aeroelastic coupling primarily consists of torsional deformations. They neglect bending deformations, deformation velocities, and inertia terms. This paper validates the assumptions above for a General Aviation propeller and a lift propeller for urban air mobility or large cargo drones. Fully coupled reduced-order simulations determine the dynamic loads in the time domain. A quasi-steady blade element momentum approach transfers loads to one-dimensional finite beam elements. The simulation results are in relatively good agreement with the analytical method for the General Aviation propeller but show increasing errors for the slender lift propeller. The analytical approach is modified to consider the induced velocities. Still, inertia and velocity proportional terms play a significant role for the lift propeller due to increased elasticity. The assumption that only torsional deformations significantly impact the dynamic loads of propellers is not valid. Adequate determination of dynamic loads of such designs requires coupled aeroelastic simulations or advanced analytical procedures.},
  language  = {en}
}
@inproceedings{MoritzYoshinobuFingeretal.2003,
  author    = {Moritz, Werner and Yoshinobu, Tatsuo and Finger, Friedhelm and Krause, Steffi and Sch{\"o}ning, Michael Josef},
  title     = {Amorphous silicon as semiconductor material for high resolution LAPS},
  series = {Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimar{\~a}es, Portugal, September 21 - 24, 2003},
  booktitle = {Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimar{\~a}es, Portugal, September 21 - 24, 2003},
  pages     = {48 -- 49},
  year      = {2003},
  language  = {en}
}
@inproceedings{MorenoDosevBratovetal.2006,
  author    = {Moreno, Lia and Dosev, D. and Bratov, A. and Dominguez, C. and Sch{\"o}ning, Michael Josef and Kloock, Joachim P.},
  title     = {Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film},
  series = {XX Eurosensors : 20th anniversary ; G{\"o}teborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1},
  booktitle = {XX Eurosensors : 20th anniversary ; G{\"o}teborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1},
  address   = {G{\"o}teborg},
  isbn      = {978-91-631-9280-7},
  pages     = {384 -- 385},
  year      = {2006},
  language  = {en}
}
@inproceedings{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Behaviour factor q for the seismic design of URM buildings},
  series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  editor    = {Arion, Christian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {1184 -- 1194},
  year      = {2022},
  abstract  = {Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.},
  language  = {en}
}
@inproceedings{MolinnusHardtKaeveretal.2017,
  author    = {Molinnus, Denise and Hardt, Gabriel and K{\"a}ver, Larissa and Willenberg, Holger S. and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Detection of Adrenaline Based on Bioelectrocatalytical System to Support Tumor Diagnostic Technology},
  series = {MDPI Proceedings},
  booktitle = {MDPI Proceedings},
  doi       = {10.3390/proceedings1040506},
  pages     = {4 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{MohanGrossMenzeletal.2021,
  author    = {Mohan, Nijanthan and Groß, Rolf Fritz and Menzel, Karsten and Theis, Fabian},
  title     = {Opportunities and Challenges in the Implementation of Building Information Modeling for Prefabrication of Heating, Ventilation and Air Conditioning Systems in Small and Medium-Sized Contracting Companies in Germany - A Case Study},
  series = {WIT Transactions on The Built Environment, Vol. 205},
  booktitle = {WIT Transactions on The Built Environment, Vol. 205},
  publisher = {WIT Press},
  address   = {Southampton},
  issn      = {1743-3509},
  doi       = {10.2495/BIM210101},
  pages     = {117 -- 126},
  year      = {2021},
  abstract  = {FEven though BIM (Building Information Modelling) is successfully implemented in most of the world, it is still in the early stages in Germany, since the stakeholders are sceptical of its reliability and efficiency. The purpose of this paper is to analyse the opportunities and obstacles to implementing BIM for prefabrication. Among all other advantages of BIM, prefabrication is chosen for this paper because it plays a vital role in creating an impact on the time and cost factors of a construction project. The project stakeholders and participants can explicitly observe the positive impact of prefabrication, which enables the breakthrough of the scepticism factor among the small-scale construction companies. The analysis consists of the development of a process workflow for implementing prefabrication in building construction followed by a practical approach, which was executed with two case studies. It was planned in such a way that, the first case study gives a first-hand experience for the workers at the site on the BIM model so that they can make much use of the created BIM model, which is a better representation compared to the traditional 2D plan. The main aim of the first case study is to create a belief in the implementation of BIM Models, which was succeeded by the execution of offshore prefabrication in the second case study. Based on the case studies, the time analysis was made and it is inferred that the implementation of BIM for prefabrication can reduce construction time, ensures minimal wastes, better accuracy, less problem-solving at the construction site. It was observed that this process requires more planning time, better communication between different disciplines, which was the major obstacle for successful implementation. This paper was carried out from the perspective of small and medium-sized mechanical contracting companies for the private building sector in Germany.},
  language  = {en}
}
@inproceedings{MiyamotoSutoWerneretal.2017,
  author    = {Miyamoto, Ko-ichiro and Suto, Takeyuki and Werner, Frederik and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Restraining the Diffusion of Photocarriers to Improve the Spatial Resolution of the Chemical Imaging Sensor},
  series = {MDPI Proceedings},
  volume    = {1},
  booktitle = {MDPI Proceedings},
  number    = {4},
  doi       = {10.3390/proceedings1040477},
  pages     = {4 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{MistlerButenweg2005,
  author    = {Mistler, Michael and Butenweg, Christoph},
  title     = {A seismic design procedure for masonry buildings},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.193},
  pages     = {465 -- 467},
  year      = {2005},
  language  = {en}
}
@inproceedings{MistlerButenwegAnthoine2004,
  author    = {Mistler, M. and Butenweg, Christoph and Anthoine, A.},
  title     = {Evaluation of the failure criterion for masonry by homogenisation},
  series = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares},
  booktitle = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <7, 2004, Lissabon>},
  isbn      = {0-948749-95-4},
  doi       = {10.4203/ccp.79.201},
  pages     = {16 Seiten},
  year      = {2004},
  language  = {en}
}