@misc{FeldmannFranckeEspeetal.2022,
  author    = {Feldmann, Marco and Francke, Gero and Espe, Clemes and Chen, Qian and Baader, Fabian and Boxberg, Marc S. and Sustrate, Anna-Marie and Kowalski, Julia and Dachwald, Bernd},
  title     = {Performance data of an ice-melting probe from field tests in two different ice environments},
  doi       = {10.5281/zenodo.6094866},
  year      = {2022},
  abstract  = {This dataset was acquired at field tests of the steerable ice-melting probe "EnEx-IceMole" (Dachwald et al., 2014). A field test in summer 2014 was used to test the melting probe's system, before the probe was shipped to Antarctica, where, in international cooperation with the MIDGE project, the objective of a sampling mission in the southern hemisphere summer 2014/2015 was to return a clean englacial sample from the subglacial brine reservoir supplying the Blood Falls at Taylor Glacier (Badgeley et al., 2017, German et al., 2021). The standardized log-files generated by the IceMole during melting operation include more than 100 operational parameters, housekeeping information, and error states, which are reported to the base station in intervals of 4 s. Occasional packet loss in data transmission resulted in a sparse number of increased sampling intervals, which where compensated for by linear interpolation during post processing. The presented dataset is based on a subset of this data: The penetration distance is calculated based on the ice screw drive encoder signal, providing the rate of rotation, and the screw's thread pitch. The melting speed is calculated from the same data, assuming the rate of rotation to be constant over one sampling interval. The contact force is calculated from the longitudinal screw force, which es measured by strain gauges. The used heating power is calculated from binary states of all heating elements, which can only be either switched on or off. Temperatures are measured at each heating element and averaged for three zones (melting head, side-wall heaters and back-plate heaters).},
  language  = {en}
}
@inproceedings{DachwaldSeboldtHaeusler2002,
  author    = {Dachwald, Bernd and Seboldt, Wolfgang and H{\"a}usler, Bernd},
  title     = {Performance requirements for near-term interplanetary solar sailcraft missions},
  series = {6th International AAAF Symposium on Space Propulsion: Propulsion for Space Transportation of the XXIst Century},
  booktitle = {6th International AAAF Symposium on Space Propulsion: Propulsion for Space Transportation of the XXIst Century},
  pages     = {9 Seiten},
  year      = {2002},
  abstract  = {Solar sailcraft provide a wide range of opportunities for high-energy low-cost missions. To date, most mission studies require a rather demanding performance that will not be realized by solar sailcraft of the first generation. However, even with solar sailcraft of moderate performance, scientifically relevant missions are feasible. This is demonstrated with a Near Earth Asteroid sample return mission and various planetary rendezvous missions.},
  language  = {en}
}
@inproceedings{SchartnerLoebDachwaldetal.2009,
  author    = {Schartner, Karl-Heinz and Loeb, H. W. and Dachwald, Bernd and Ohndorf, Andreas},
  title     = {Perspectives of electric propulsion for outer planetary and deep space missions},
  series = {European Planetary Science Congress 2009},
  booktitle = {European Planetary Science Congress 2009},
  pages     = {416 -- 416},
  year      = {2009},
  abstract  = {Solar-electric propulsion (SEP) is superior with respect to payload capacity, flight time and flexible launch window to the conventional interplanetary transfer method using chemical propulsion combined with gravity assists. This fact results from the large exhaust velocities of electric low-thrust propulsion and is favourable also for missions to the giant planets, Kuiper-belt objects and even for a heliopause probe (IHP) as shown in three studies by the authors funded by DLR. They dealt with a lander for Europa and a sample return mission from a mainbelt asteroid [1], with the TANDEM mission [2]; the third recent one investigates electric propulsion for the transfer to the edge of the solar system. All studies are based on triple-junction solar arrays, on rf-ion thrusters of the qualified RIT-22 type and they use the intelligent trajectory optimization program InTrance [3].},
  language  = {en}
}
@article{BlomeKosbow2004,
  author    = {Blome, Hans-Joachim and Kosbow, Michael},
  title     = {Perturbation of a satellite orbit by gravitational waves},
  series = {Jahrbuch 2004 der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR)},
  journal   = {Jahrbuch 2004 der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR)},
  publisher = {DGLR},
  address   = {Bonn},
  isbn      = {0070-4083},
  pages     = {2083 -- 2088},
  year      = {2004},
  language  = {en}
}
@article{HeiligersSchoutetensDachwald2021,
  author    = {Heiligers, Jeannette and Schoutetens, Frederic and Dachwald, Bernd},
  title     = {Photon-sail equilibria in the alpha centauri system},
  series = {Journal of Guidance, Control, and Dynamics},
  volume    = {44},
  journal   = {Journal of Guidance, Control, and Dynamics},
  number    = {5},
  issn      = {1533-3884},
  doi       = {10.2514/1.G005446},
  pages     = {1053 -- 1061},
  year      = {2021},
  language  = {en}
}
@article{StadlerGarveyEmbsetal.2014,
  author    = {Stadler, Alexander Maximilian and Garvey, Christopher J. and Embs, Jan Peter and Koza, Michael Marek and Unruh, Tobias and Artmann, Gerhard and Zaccai, Guiseppe},
  title     = {Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study},
  series = {Biochimica et biophysica acta (BBA): General Subjects},
  volume    = {1840},
  journal   = {Biochimica et biophysica acta (BBA): General Subjects},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-8006 (E-Journal); 0304-4165 (Print)},
  doi       = {10.1016/j.bbagen.2014.06.007},
  pages     = {2989 -- 2999},
  year      = {2014},
  language  = {en}
}
@inproceedings{KleineKallweitMichauxetal.2016,
  author    = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert},
  title     = {PIV Measurement of Shock Wave Diffraction},
  series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  pages     = {1 -- 14},
  year      = {2016},
  language  = {en}
}
@article{HavermannHaertigReyetal.2001,
  author    = {Havermann, Marc and Haertig, J. and Rey, C. and George, F.},
  title     = {PIV measurements in Mach 3.5 and 4.5 shock tunnel flow / Haertig, J. ; Havermann, M. ; Rey, C. ; George, F.},
  publisher = {-},
  year      = {2001},
  language  = {en}
}
@book{Havermann2006,
  author    = {Havermann, Marc},
  title     = {PIV measurements in shock tunnels : PivNet 2, Final Workshop, G{\"o}ttingen, 07. - 08.09.2006},
  publisher = {ISL},
  address   = {Saint-Louis},
  pages     = {12 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {en}
}
@article{HavermannHaertigReyetal.2008,
  author    = {Havermann, Marc and Haertig, J. and Rey, C. and George, A.},
  title     = {PIV Measurements in Shock Tunnels and Shock Tubes / Havermann, M. ; Haertig, J. ; Rey, C. ; George, A.},
  series = {Particle Image Velocimetry : New Developments and Recent Applications},
  journal   = {Particle Image Velocimetry : New Developments and Recent Applications},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-73528-1},
  pages     = {429 -- 442},
  year      = {2008},
  language  = {en}
}