@article{KluczkaEcksteinAlexopoulosetal.2014,
  author    = {Kluczka, Sven and Eckstein, Julian and Alexopoulos, Spiros and Vaeßen, Christiane and Roeb, Martin},
  title     = {Process simulation for solar steam and dry reforming},
  series = {Energy procedia : Proceedings of the SolarPACES 2013 International Conference},
  volume    = {49},
  journal   = {Energy procedia : Proceedings of the SolarPACES 2013 International Conference},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal)},
  doi       = {10.1016/j.egypro.2014.03.092},
  pages     = {850 -- 859},
  year      = {2014},
  abstract  = {In co-operation with the German Aerospace Center, the Solar-Institut J{\"u}lich has been analyzing the different technologies that are available for methanol production from CO2 using solar energy. The aim of the project is to extract CO2 from industrial exhaust gases or directly from the atmosphere to recycle it by use of solar energy. Part of the study was the modeling and simulating of a methane reformer for the production of synthesis gas, which can be operated by solar or hybrid heat sources. The reformer has been simplified in such a way that the model is accurate and enables fast calculations. The developed pseudo-homogeneous one- dimensional model can be regarded as a kind of counter-current heat exchanger and is able to incorporate a steam reforming reaction as well as a dry reforming reaction.},
  language  = {en}
}
@article{GoettscheHinschWittwer1993,
  author    = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker},
  title     = {Electrochromic mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique : a comparison / J. G{\"o}ttsche ; A. Hinsch ; V. Wittwer},
  series = {Solar Energy Materials and Solar Cells. 31 (1993), H. 3},
  journal   = {Solar Energy Materials and Solar Cells. 31 (1993), H. 3},
  isbn      = {0927-0248},
  pages     = {415 -- 428},
  year      = {1993},
  language  = {en}
}
@inproceedings{AlexopoulosHoffschmidtRauetal.2011,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard and Rau, Christoph and Sattler, Johannes Christoph},
  title     = {Choice of solar share of a hybrid power plant of a central receiver system and a biogas plant in dependency of the geographical latitude},
  series = {World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Link{\"o}ping, Sweden / ed.: Bahram Moshfegh},
  booktitle = {World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Link{\"o}ping, Sweden / ed.: Bahram Moshfegh},
  publisher = {Univ. Electronic Pr.},
  address   = {Link{\"o}ping},
  isbn      = {9789173930703},
  pages     = {3710 -- 3717},
  year      = {2011},
  language  = {en}
}
@inproceedings{AchenbachBoschBreitbachetal.2013,
  author    = {Achenbach, Timm and Bosch, Timo and Breitbach, Gerd and G{\"o}ttsche, Joachim and Sauerborn, Markus},
  title     = {Theoretical and experimental investigations regarding open volumetric receivers of CRS},
  series = {Energy procedia : proceedings of the SolarPACES 2013 International Conference},
  volume    = {Vol. 49},
  booktitle = {Energy procedia : proceedings of the SolarPACES 2013 International Conference},
  issn      = {1876-6102},
  pages     = {1259 -- 1268},
  year      = {2013},
  language  = {en}
}
@incollection{HerrmannKearneyRoegeretal.2017,
  author    = {Herrmann, Ulf and Kearney, D. and R{\"o}ger, M. and Prahl, C.},
  title     = {System performance measurements},
  series = {The Performance of Concentrated Solar Power (CSP) Systems : Modelling, Measurement and Assessment},
  booktitle = {The Performance of Concentrated Solar Power (CSP) Systems : Modelling, Measurement and Assessment},
  publisher = {Woodhead Publishing},
  address   = {Duxford},
  isbn      = {978-0-08-100448-7},
  doi       = {https://doi.org/10.1016/B978-0-08-100447-0.00005-5},
  pages     = {115 -- 165},
  year      = {2017},
  abstract  = {This chapter introduces performance and acceptance testing and describes state-of-the-art tools, methods, and instruments to assess the plant performance or realize plant acceptance testing. The status of the development of standards for performance assessment is given.},
  language  = {en}
}
@article{SattlerRoegerSchwarzboezletal.2020,
  author    = {Sattler, Johannes Christoph and R{\"o}ger, Marc and Schwarzb{\"o}zl, Peter and Buck, Reiner and Macke, Ansgar and Raeder, Christian and G{\"o}ttsche, Joachim},
  title     = {Review of heliostat calibration and tracking control methods},
  series = {Solar Energy},
  volume    = {207},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.solener.2020.06.030},
  pages     = {110 -- 132},
  year      = {2020},
  abstract  = {Large scale central receiver systems typically deploy between thousands to more than a hundred thousand heliostats. During solar operation, each heliostat is aligned individually in such a way that the overall surface normal bisects the angle between the sun's position and the aim point coordinate on the receiver. Due to various tracking error sources, achieving accurate alignment ≤1 mrad for all the heliostats with respect to the aim points on the receiver without a calibration system can be regarded as unrealistic. Therefore, a calibration system is necessary not only to improve the aiming accuracy for achieving desired flux distributions but also to reduce or eliminate spillage. An overview of current larger-scale central receiver systems (CRS), tracking error sources and the basic requirements of an ideal calibration system is presented. Leading up to the main topic, a description of general and specific terms on the topics heliostat calibration and tracking control clarifies the terminology used in this work. Various figures illustrate the signal flows along various typical components as well as the corresponding monitoring or measuring devices that indicate or measure along the signal (or effect) chain. The numerous calibration systems are described in detail and classified in groups. Two tables allow the juxtaposition of the calibration methods for a better comparison. In an assessment, the advantages and disadvantages of individual calibration methods are presented.},
  language  = {en}
}
@incollection{HoffschmidtAlexopoulosRauetal.2022,
  author    = {Hoffschmidt, Bernhard and Alexopoulos, Spiros and Rau, Christoph and Sattler, Johannes Christoph and Anthrakidis, Anette and Teixeira Boura, Cristiano Jos{\´e} and O'Connor, B. and Chico Caminos, Ricardo Alexander and Rend{\´o}n, C. and Hilger, P.},
  title     = {Concentrating solar power},
  series = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  booktitle = {Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-12-819734-9},
  pages     = {670 -- 724},
  year      = {2022},
  abstract  = {The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world.},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2009,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays / G{\"o}ttsche, Joachim ; Hoffschmidt, Bernhard ; Schmitz, Stefan ; Sauerborn, Markus ; Buck, Reiner ; Teufel, Edgar ; Badst{\"u}bner, Karin ; Ifland, David ; Rebholz, Christian},
  series = {Proceedings of the 2nd International Conference on Energy Sustainability - 2008 : : presented ... August 10 - 14, 2008, Jacksonville, Florida, USA / sponsored by Advanced Energy Systems Division, ASME; Solar Energy Division, ASME},
  journal   = {Proceedings of the 2nd International Conference on Energy Sustainability - 2008 : : presented ... August 10 - 14, 2008, Jacksonville, Florida, USA / sponsored by Advanced Energy Systems Division, ASME; Solar Energy Division, ASME},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {9780791843208},
  pages     = {1 -- 5},
  year      = {2009},
  language  = {en}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {Vol. 132},
  journal   = {Journal of solar energy engineering},
  number    = {Iss. 1},
  isbn      = {0199-6231},
  pages     = {4 S.},
  year      = {2010},
  language  = {en}
}