@article{EngelHoltmannUlberetal.2018,
  author    = {Engel, Mareike and Holtmann, Dirk and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Increased Biobutanol Production by Mediator-Less Electro-Fermentation},
  series = {Biotechnology Journal},
  volume    = {14},
  journal   = {Biotechnology Journal},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1860-7314},
  doi       = {10.1002/biot.201800514},
  year      = {2018},
  abstract  = {A future bio-economy should not only be based on renewable raw materials but also in the raise of carbon yields of existing production routes. Microbial electrochemical technologies are gaining increased attention for this purpose. In this study, the electro-fermentative production of biobutanol with C. acetobutylicum without the use of exogenous mediators is investigated regarding the medium composition and the reactor design. It is shown that the use of an optimized synthetic culture medium allows higher product concentrations, increased biofilm formation, and higher conductivities compared to a synthetic medium supplemented with yeast extract. Moreover, the optimization of the reactor system results in a doubling of the maximum product concentrations for fermentation products. When a working electrode is polarized at -600 mV vs. Ag/AgCl, a shift from butyrate to acetone and butanol production is induced. This leads to an increased final solvent yield of Yᴀᴃᴇ = 0.202 gg⁻¹ (control 0.103 gg⁻¹), which is also reflected in a higher carbon efficiency of 37.6\% compared to 23.3\% (control) as well as a fourfold decrease in simplified E-factor to 0.43. The results are promising for further development of biobutanol production in bioelectrochemical systems in order to fulfil the principles of Green Chemistry.},
  language  = {en}
}
@article{FingerBraunBil2018,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Impact of electric propulsion technology and mission requirements on the performance of VTOL UAVs},
  series = {CEAS Aeronautical Journal},
  volume    = {10},
  journal   = {CEAS Aeronautical Journal},
  number    = {3},
  publisher = {Springer},
  issn      = {1869-5582 print},
  doi       = {10.1007/s13272-018-0352-x},
  pages     = {843},
  year      = {2018},
  abstract  = {One of the engineering challenges in aviation is the design of transitioning vertical take-off and landing (VTOL) aircraft. Thrust-borne flight implies a higher mass fraction of the propulsion system, as well as much increased energy consumption in the take-off and landing phases. This mass increase is typically higher for aircraft with a separate lift propulsion system than for aircraft that use the cruise propulsion system to support a dedicated lift system. However, for a cost-benefit trade study, it is necessary to quantify the impact the VTOL requirement and propulsion configuration has on aircraft mass and size. For this reason, sizing studies are conducted. This paper explores the impact of considering a supplemental electric propulsion system for achieving hovering flight. Key variables in this study, apart from the lift system configuration, are the rotor disk loading and hover flight time, as well as the electrical systems technology level for both batteries and motors. Payload and endurance are typically used as the measures of merit for unmanned aircraft that carry electro-optical sensors, and therefore the analysis focuses on these particular parameters.},
  language  = {en}
}
@article{BergSchleserDelidovichetal.2018,
  author    = {Berg, Alexander-Karl and Schleser, Markus and Delidovich, Artem and Houben, Alexander},
  title     = {Ultraschallunterst{\"u}tzter Schmelzklebstoffauftrag},
  series = {adh{\"a}sion KLEBEN \& DICHTEN},
  volume    = {Volume 62},
  journal   = {adh{\"a}sion KLEBEN \& DICHTEN},
  number    = {Issue 12},
  publisher = {Springer},
  doi       = {10.1007/s35145-018-0089-z},
  pages     = {32 -- 37},
  year      = {2018},
  language  = {de}
}
@article{KampkerSchleserTriebsetal.2018,
  author    = {Kampker, Achim and Schleser, Markus and Triebs, Johannes and Berg, Alexander-Karl and Hansen, Jan Ole and Fiedler, Falko},
  title     = {Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK},
  series = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  volume    = {113},
  journal   = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  number    = {11},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {0947-0085},
  doi       = {10.3139/104.112012},
  pages     = {767 -- 770},
  year      = {2018},
  abstract  = {Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kosteng{\"u}nstige und effiziente L{\"o}sungsans{\"a}tze f{\"u}r Prozessketten im Zukunftsfeld der Elektromobilit{\"a}t. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden.},
  language  = {de}
}
@article{HueningHeuermannWache2018,
  author    = {H{\"u}ning, Felix and Heuermann, Holger and Wache, Franz-Josef},
  title     = {Wireless CAN without WLAN or Bluetooth},
  series = {CAN Newsletter},
  journal   = {CAN Newsletter},
  number    = {December 2018},
  pages     = {44 -- 46},
  year      = {2018},
  abstract  = {In two developed concepts, dual-mode radio enables CAN participants to be integrated wirelessly into a CAN network. Constructed from a few components, a protocol-free, real-time transmission and thus transparent integration into CAN is provided.},
  language  = {en}
}
@article{ButenwegMarinkovićFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Fehling, Ekkehard and Pfetzing, Thomas},
  title     = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  isbn      = {0005-6650},
  pages     = {2 -- 10},
  year      = {2018},
  language  = {de}
}
@article{DitzhausGaigall2018,
  author    = {Ditzhaus, Marc and Gaigall, Daniel},
  title     = {A consistent goodness-of-fit test for huge dimensional and functional data},
  series = {Journal of Nonparametric Statistics},
  volume    = {30},
  journal   = {Journal of Nonparametric Statistics},
  number    = {4},
  publisher = {Taylor \& Francis},
  address   = {Abingdon},
  issn      = {1029-0311},
  doi       = {10.1080/10485252.2018.1486402},
  pages     = {834 -- 859},
  year      = {2018},
  abstract  = {A nonparametric goodness-of-fit test for random variables with values in a separable Hilbert space is investigated. To verify the null hypothesis that the data come from a specific distribution, an integral type test based on a Cram{\´e}r-von-Mises statistic is suggested. The convergence in distribution of the test statistic under the null hypothesis is proved and the test's consistency is concluded. Moreover, properties under local alternatives are discussed. Applications are given for data of huge but finite dimension and for functional data in infinite dimensional spaces. A general approach enables the treatment of incomplete data. In simulation studies the test competes with alternative proposals.},
  language  = {en}
}
@article{BaringhausGaigallThiele2018,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel and Thiele, Jan Philipp},
  title     = {Statistical inference for L²-distances to uniformity},
  series = {Computational Statistics},
  volume    = {2018},
  journal   = {Computational Statistics},
  number    = {33},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-9658},
  doi       = {10.1007/s00180-018-0820-0},
  pages     = {1863 -- 1896},
  year      = {2018},
  abstract  = {The paper deals with the asymptotic behaviour of estimators, statistical tests and confidence intervals for L²-distances to uniformity based on the empirical distribution function, the integrated empirical distribution function and the integrated empirical survival function. Approximations of power functions, confidence intervals for the L²-distances and statistical neighbourhood-of-uniformity validation tests are obtained as main applications. The finite sample behaviour of the procedures is illustrated by a simulation study.},
  language  = {en}
}
@article{BaringhausGaigall2018,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {Efficiency comparison of the Wilcoxon tests in paired and independent survey samples},
  series = {Metrika},
  volume    = {2018},
  journal   = {Metrika},
  number    = {81},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1435-926X},
  doi       = {10.1007/s00184-018-0661-4},
  pages     = {891 -- 930},
  year      = {2018},
  abstract  = {The efficiency concepts of Bahadur and Pitman are used to compare the Wilcoxon tests in paired and independent survey samples. A comparison through the length of corresponding confidence intervals is also done. Simple conditions characterizing the dominance of a procedure are derived. Statistical tests for checking these conditions are suggested and discussed.},
  language  = {de}
}
@article{ButenwegMarinkovićKubalskietal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Kubalski, Thomas and Fehling, Ekkehard and Pfetzing, Thomas and Meyer, Udo},
  title     = {Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1)},
  series = {Ziegelindustrie international : ZI = Brick and tile industry international},
  journal   = {Ziegelindustrie international : ZI = Brick and tile industry international},
  number    = {4},
  editor    = {Voss, Michael},
  publisher = {Bauverlag BV GmbH},
  address   = {G{\"u}tersloh},
  issn      = {0341-0552},
  pages     = {30 -- 39},
  year      = {2018},
  abstract  = {Im Rahmen des europ{\"a}ischen Verbundprojekts INSYSME wurden von den deutschen Partnern die Systeme IMES und INODIS zur Verbesserung des seismischen Verhaltens von ausgefachten Stahlbetonrahmen entwickelt. Ziel beider Systeme ist es, Stahlbetonrahmen und Ausfachung zu entkoppeln, anstatt die Tragf{\"a}higkeit durch aufwendige und kostspielige zus{\"a}tzliche Bewehrungseinlagen zu erh{\"o}hen. Erste Ergebnisse des Systems IMES f{\"u}r Belastungen in und senkrecht zu der Wandebene werden vorgestellt.},
  language  = {de}
}