@incollection{MacdonaldMcGrathAppourchauxetal.2014,
  author    = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, Wolfgang and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger},
  title     = {Gossamer roadmap technology reference study for a solar polar mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  editor    = {Macdonald, Malcolm},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-642-34906-5},
  doi       = {10.1007/978-3-642-34907-2_17},
  pages     = {243 -- 257},
  year      = {2014},
  abstract  = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.},
  language  = {en}
}
@inproceedings{TranStaatStavroulakis2014,
  author    = {Tran, Ngoc Trinh and Staat, Manfred and Stavroulakis, G. E.},
  title     = {A multicriteria method for truss optimization},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{LeandroBungCarvalho2014,
  author    = {Leandro, J. and Bung, Daniel Bernhard and Carvalho, R.},
  title     = {Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods},
  series = {Experiments in fluids},
  journal   = {Experiments in fluids},
  number    = {55},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0723-4864 (Print) ; 1432-1114 (Online)},
  doi       = {10.1007/s00348-014-1732-6},
  pages     = {Art. 1732},
  year      = {2014},
  language  = {en}
}
@inproceedings{FrotscherKochRaatschenetal.2014,
  author    = {Frotscher, Ralf and Koch, Jan-Peter and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {Evaluation of a computational model for drug action on cardiac tissue},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@book{Laack2014,
  author    = {Laack, Walter van},
  title     = {Schnittstelle Tod: Was spricht f{\"u}r unser Weiterleben?},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-19-9},
  pages     = {100 S.},
  year      = {2014},
  language  = {de}
}
@inproceedings{BhattaraiFrotscherSoraetal.2014,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Sora, M.-C. and Staat, Manfred},
  title     = {A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence},
  series = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  booktitle = {11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona},
  editor    = {Onate, E.},
  organization    = {World Congress on Computational Mechanics <11, 2014, Barcelona>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@article{KueppersSteffenHellmuthetal.2014,
  author    = {K{\"u}ppers, Tobias and Steffen, Victoria and Hellmuth, Hendrik and O'Connell, Timothy and Bongaerts, Johannes and Maurer, Karl-Heinz and Wiechert, Wolfgang},
  title     = {Developing a new production host from a blueprint: Bacillus pumilus as an industrial enzyme producer},
  series = {Microbial cell factories},
  volume    = {13},
  journal   = {Microbial cell factories},
  publisher = {BioMed Central},
  address   = {London},
  issn      = {1475-2859 (E-Journal)},
  doi       = {10.1186/1475-2859-13-46},
  pages     = {Article No. 46},
  year      = {2014},
  language  = {en}
}
@article{PhamStaat2014,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {FEM-based shakedown analysis of hardening structures},
  series = {Asia Pacific journal on computational engineering},
  journal   = {Asia Pacific journal on computational engineering},
  number    = {1},
  publisher = {SpringerOpen},
  address   = {Berlin},
  issn      = {2196-1166 (E-Journal)},
  doi       = {10.1186/2196-1166-1-4},
  pages     = {Article No. 4},
  year      = {2014},
  abstract  = {This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.},
  language  = {en}
}
@article{HaagZontarSchleupenetal.2014,
  author    = {Haag, S. and Zontar, D. and Schleupen, Josef and M{\"u}ller, T. and Brecher, C.},
  title     = {Chain of refined perception in self-optimizing assembly of micro-optical systems},
  series = {Journal of sensors and sensor systems},
  volume    = {3},
  journal   = {Journal of sensors and sensor systems},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-3-87-2014},
  pages     = {87 -- 95},
  year      = {2014},
  abstract  = {Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements - especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.},
  language  = {en}
}
@inproceedings{HecklWeilerFleischhakeretal.2014,
  author    = {Heckl, O. H. and Weiler, Sascha and Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Russ, S. and Kumkar, M. and Sutter, Dirk H.},
  title     = {Industry-grade high average power femtosecond light source},
  series = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  booktitle = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  editor    = {Heisterkamp, Alexander and Herman, Peter R. and Meunier, Michael and Nolte, Stefan},
  publisher = {SPIE, International Society for Optical Engineering},
  doi       = {10.1117/12.2039337},
  pages     = {89720P -- 89720P-7},
  year      = {2014},
  language  = {en}
}