@article{KuhnhenneRegerPyschnyetal.2020,
  author    = {Kuhnhenne, Markus and Reger, Vitali and Pyschny, Dominik and D{\"o}ring, Bernd},
  title     = {Influence of airtightness of steel sandwich panel joints on heat losses},
  series = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  volume    = {172},
  journal   = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)},
  number    = {Art. 05008},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  doi       = {10.1051/e3sconf/202017205008},
  pages     = {6},
  year      = {2020},
  abstract  = {Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.},
  language  = {en}
}
@article{RegerKuhnhenneEbbertetal.2020,
  author    = {Reger, Vitali and Kuhnhenne, Markus and Ebbert, Thiemo and Hachul, Helmut and Blanke, Tobias and D{\"o}ring, Bernd},
  title     = {Nutzung erneuerbarer Energien durch thermische Aktivierung von Komponenten aus Stahl},
  series = {Stahlbau},
  volume    = {2020},
  journal   = {Stahlbau},
  number    = {Volume 89, Issue 6512-519},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049},
  doi       = {10.1002/stab.202000031},
  pages     = {512 -- 519},
  year      = {2020},
  abstract  = {Die Versorgung von Neubauten soll m{\"o}glichst weitgehend unabh{\"a}ngig von fossilen Energietr{\"a}gern erfolgen. Erneuerbare Energien spielen daf{\"u}r eine gewichtige Rolle. Eine gute M{\"o}glichkeit, erneuerbare Energien ohne viel zus{\"a}tzlichen Aufwand nutzbar zu machen, ist, bereits vorhandenen Komponenten im Geb{\"a}ude zus{\"a}tzliche Funktionen zu geben. Hier kann bspw. die Fassade oder das Dach solarthermisch aktiviert oder durch Fotovoltaikmodule erg{\"a}nzt werden. Auch Tiefgr{\"u}ndungen k{\"o}nnen neben der statischen Funktion noch eine geothermische Funktion zur Aufnahme oder Abgabe von W{\"a}rme erhalten. Neben der Erzeugung bietet sich auch f{\"u}r die Verteilung der W{\"a}rme oder K{\"a}lte im Geb{\"a}ude die Integration in Bauteile an. Hier kann bspw. der Boden durch eine Fußbodenheizung oder die Decke durch Deckenstrahlplatten aktiviert werden. Im Rahmen der Ver{\"o}ffentlichung wird auf die thermische Aktivierung von Stahlkomponenten eingegangen. Es wird eine L{\"o}sung vorgestellt, die vorgeh{\"a}ngte hinterl{\"u}ftete Stahlfassade (VHF) solarthermisch zu aktivieren. Außerdem werden zwei M{\"o}glichkeiten zur geothermischen Aktivierung von Tiefgr{\"u}ndungen mittels Stahlpf{\"a}hlen gezeigt. Zuletzt wird ein System zur thermischen Aktivierung von Stahltrapezprofilen an der Decke erl{\"a}utert, welches W{\"a}rme zuf{\"u}hren oder bei Bedarf abf{\"u}hren kann.},
  language  = {de}
}
@article{BungCrookstonValero2020,
  author    = {Bung, Daniel Bernhard and Crookston, Brian M. and Valero, Daniel},
  title     = {Turbulent free-surface monitoring with an RGB-D sensor: the hydraulic jump case},
  series = {Journal of Hydraulic Research},
  journal   = {Journal of Hydraulic Research},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079},
  doi       = {10.1080/00221686.2020.1844810},
  year      = {2020},
  language  = {en}
}
@article{ValeroChansonBung2020,
  author    = {Valero, Daniel and Chanson, Hubert and Bung, Daniel Bernhard},
  title     = {Robust estimators for free surface turbulence characterization: A stepped spillway application},
  series = {Flow Measurement and Instrumentation},
  volume    = {76},
  journal   = {Flow Measurement and Instrumentation},
  number    = {Art. 101809},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0955-5986},
  doi       = {10.1016/j.flowmeasinst.2020.101809},
  year      = {2020},
  abstract  = {Robust estimators are parameters insensitive to the presence of outliers. However, they presume the shape of the variables' probability density function. This study exemplifies the sensitivity of turbulent quantities to the use of classic and robust estimators and the presence of outliers in turbulent flow depth time series. A wide range of turbulence quantities was analysed based upon a stepped spillway case study, using flow depths sampled with Acoustic Displacement Meters as the flow variable of interest. The studied parameters include: the expected free surface level, the expected fluctuation intensity, the depth skewness, the autocorrelation timescales, the vertical velocity fluctuation intensity, the perturbations celerity and the one-dimensional free surface turbulence spectrum. Three levels of filtering were utilised prior to applying classic and robust estimators, showing that comparable robustness can be obtained either using classic estimators together with an intermediate filtering technique or using robust estimators instead, without any filtering technique.},
  language  = {en}
}
@article{PetersonOsterPeterson2020,
  author    = {Peterson-Oster, Madeleine and Peterson, Leif Arne},
  title     = {Gewerbebau: Modellprojekt mit neuem elementiertem, freistehendem Fassadensystem},
  series = {Bauen mit Holz, Der Zimmermann},
  journal   = {Bauen mit Holz, Der Zimmermann},
  publisher = {Rudolf M{\"u}ller},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  year      = {2020},
  abstract  = {Die im Zuge einer Betriebs{\"u}bergabe anstehende Baumaßnahmen am eigenen B{\"u}ro- und Produktionsgeb{\"a}ude boten ideale Voraussetzung zur Anwendung einer raum­-kreierenden Außenhaut. Mit der elementierten, freistehenden Eichenholz-Fassade wurde ein bis dahin weitgehend funktionales Bauwerk substanzschonend und zugleich optisch ansprechender umgestaltet.},
  language  = {de}
}
@article{PetersonOsterPeterson2020,
  author    = {Peterson-Oster, Madeleine and Peterson, Leif Arne},
  title     = {Fassadensystem: Optisch ansprechend, freistehend, elementiert und aus Eichenholz},
  series = {Bauen mit Holz, Der Zimmermann},
  journal   = {Bauen mit Holz, Der Zimmermann},
  publisher = {Rudolf M{\"u}ller},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  year      = {2020},
  abstract  = {Bei der Entwicklung des Fassadensystems ging es darum die m{\"o}gliche Dauerhaftigkeit von Holz bei direkter Bewitterung zu maximieren. Gleichzeitig soll gezeigt werden, dass mittels durchdachter Ans{\"a}tze beim konstruktiven Holzschutz und die Wahl einer geeigneten Holzart langlebige Konstruktionen realisiert werden k{\"o}nnen.},
  language  = {de}
}
@article{ValeroChansonBung2019,
  author    = {Valero, Daniel and Chanson, Hubert and Bung, Daniel Bernhard},
  title     = {Robust estimators for turbulence properties assessment},
  pages     = {1 -- 24},
  year      = {2019},
  language  = {en}
}
@article{KramerValeroChansonetal.2019,
  author    = {Kramer, Matthias and Valero, Daniel and Chanson, Hubert and Bung, Daniel Bernhard},
  title     = {Towards reliable turbulence estimations with phase-detection probes: an adaptive window cross-correlation technique},
  series = {Experiments in Fluids},
  volume    = {60},
  journal   = {Experiments in Fluids},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1114},
  doi       = {10.1007/s00348-018-2650-9},
  year      = {2019},
  language  = {en}
}
@article{ValeroVitiGualtieri2019,
  author    = {Valero, Daniel and Viti, Nicolo and Gualtieri, Carlo},
  title     = {Numerical Simulation of Hydraulic Jumps. Part 1: Experimental Data for Modelling Performance Assessment},
  series = {Water},
  volume    = {11},
  journal   = {Water},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4441},
  doi       = {10.3390/w11010036},
  pages     = {Art. Nr. 36},
  year      = {2019},
  language  = {en}
}
@article{VitiValeroGualtieri2019,
  author    = {Viti, Nicolo and Valero, Daniel and Gualtieri, Carlo},
  title     = {Numerical Simulation of Hydraulic Jumps. Part 2: Recent Results and Future Outlook},
  series = {Water},
  volume    = {11},
  journal   = {Water},
  number    = {1},
  issn      = {2073-4441},
  doi       = {10.3390/w11010028},
  pages     = {Art. Nr. 28},
  year      = {2019},
  language  = {en}
}