@inproceedings{WuKemper2016,
  author    = {Wu, Ziyi and Kemper, Hans},
  title     = {The optimal 48 V - battery pack for a specific load profile of a heavy duty vehicle},
  series = {8. Internationale Fachtagung Kraftwerk Batterie : 26. - 27. April 2016, M{\"u}nster, Deutschland},
  booktitle = {8. Internationale Fachtagung Kraftwerk Batterie : 26. - 27. April 2016, M{\"u}nster, Deutschland},
  year      = {2016},
  language  = {en}
}
@inproceedings{NeuJanserKhatibietal.2016,
  author    = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.},
  title     = {In-flight vibration-based structural health monitoring of aircraft wings},
  series = {30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea},
  booktitle = {30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea},
  pages     = {10 Seiten},
  year      = {2016},
  abstract  = {This work presents a methodology for automated damage-sensitive feature extraction and anomaly detection under multivariate operational variability for in-flight assessment of wings. The method uses a passive excitation approach, i. e. without the need for artificial actuation. The modal system properties (natural frequencies and damping ratios) are used as damage-sensitive features. Special emphasis is placed on the use of Fiber Bragg Grating (FBG) sensing technology and the consideration of Operational and Environmental Variability (OEV). Measurements from a wind tunnel investigation with a composite cantilever equipped with FBG and piezoelectric sensors are used to successfully detect an impact damage. In addition, the feasibility of damage localisation and severity estimation is evaluated based on the coupling found between damageand OEV-induced feature changes.},
  language  = {en}
}
@inproceedings{BarnatBosse2016,
  author    = {Barnat, Miriam and Bosse, Elke},
  title     = {The challenge of creating meta-inferences: Combining data representing institutional and individual perspectives on first-year support in higher education},
  series = {9th Conference on Social Science Methodology of the International Sociological Association, Leicester, UK},
  booktitle = {9th Conference on Social Science Methodology of the International Sociological Association, Leicester, UK},
  pages     = {1 -- 20},
  year      = {2016},
  language  = {en}
}
@inproceedings{KleineKallweitMichauxetal.2016,
  author    = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert},
  title     = {PIV Measurement of Shock Wave Diffraction},
  series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon},
  pages     = {1 -- 14},
  year      = {2016},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2016,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan},
  title     = {The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance},
  series = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  booktitle = {17th European Conference on Composite Materials - ECCM, Munich, Germany},
  pages     = {1 -- 8},
  year      = {2016},
  language  = {en}
}
@inproceedings{Matcha2016,
  author    = {Matcha, Heike},
  title     = {From Designing Buildings from Systems to Designing Systems for Buildings},
  series = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  booktitle = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  editor    = {Herneoja, Aulikki and {\"O}sterlund, Toni and Markkanen, Piia},
  publisher = {ECAADe},
  address   = {Oulu, Finland},
  doi       = {10.52842/conf.ecaade.2016.1.237},
  pages     = {237 -- 240},
  year      = {2016},
  abstract  = {We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.},
  language  = {en}
}
@inproceedings{RauschLeiseEdereretal.2016,
  author    = {Rausch, Lea and Leise, Philipp and Ederer, Thorsten and Altherr, Lena and Pelz, Peter F.},
  title     = {A comparison of MILP and MINLP solver performance on the example of a drinking water supply system design problem},
  series = {ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering},
  booktitle = {ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering},
  editor    = {Papadrakakis, M. and Ppadopoulos, V. and Stefanou, G. and Plevris, V.},
  isbn      = {978-618-82844-0-1},
  pages     = {8509 -- 8527},
  year      = {2016},
  abstract  = {Finding a good system topology with more than a handful of components is a highly non-trivial task. The system needs to be able to fulfil all expected load cases, but at the same time the components should interact in an energy-efficient way. An example for a system design problem is the layout of the drinking water supply of a residential building. It may be reasonable to choose a design of spatially distributed pumps which are connected by pipes in at least two dimensions. This leads to a large variety of possible system topologies. To solve such problems in a reasonable time frame, the nonlinear technical characteristics must be modelled as simple as possible, while still achieving a sufficiently good representation of reality. The aim of this paper is to compare the speed and reliability of a selection of leading mathematical programming solvers on a set of varying model formulations. This gives us empirical evidence on what combinations of model formulations and solver packages are the means of choice with the current state of the art.},
  language  = {en}
}
@inproceedings{NursinskiStolbergGangatharanCzarnecki2016,
  author    = {Nursinski-Stolberg, Andr{\´e} and Gangatharan, Kiritharan and Czarnecki, Christian},
  title     = {Development of a subject-oriented reference process model for the telecommunications industry},
  series = {GI Edition Proceedings Band 259 INFORMATIK 2016},
  booktitle = {GI Edition Proceedings Band 259 INFORMATIK 2016},
  editor    = {Mayr, Heinrich C. and Pinzger, Martin},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Bonn},
  isbn      = {9783885796534},
  issn      = {1617-5468},
  pages     = {699 -- 712},
  year      = {2016},
  abstract  = {Generally the usage of reference models can be structured top-down or bottom-up. The practical need of agile change and flexible organizational implementation requires a consistent mapping to an operational level. In this context, well-established reference process models are typically structured top-down. The subject-oriented Business Process Management (sBPM) offers a modeling concept that is structured bottom-up and concentrates on the process actors on an operational level. This paper applies sBPM to the enhanced Telecom Operations Map (eTOM), a well-accepted reference process model in the telecommunications industry. The resulting design artifact is a concrete example for a combination of a bottom-up and top-down developed reference model. The results are evaluated and confirmed in practical context through the involvement of the industry body TMForum.},
  language  = {en}
}
@inproceedings{HoevelerJanser2016,
  author    = {Hoeveler, Bastian and Janser, Frank},
  title     = {The aerodynamically optimized design of a fan-in-wing duct},
  series = {Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016},
  booktitle = {Applied Aerodynamics Research Conference 2016, Bristol, GB, Jul 19-21, 2016},
  isbn      = {1-85768-371-4},
  pages     = {1 -- 10},
  year      = {2016},
  language  = {en}
}
@inproceedings{OttenSchmidtWeber2016,
  author    = {Otten, D. and Schmidt, M. and Weber, Tobias},
  title     = {Advances in Determination of Material Parameters for Functional Simulations Based on Process Simulations},
  series = {SAMPE Europe Conference 16 Liege},
  booktitle = {SAMPE Europe Conference 16 Liege},
  isbn      = {978-1-5108-3800-0},
  pages     = {570 -- 577},
  year      = {2016},
  language  = {en}
}