@incollection{MoorkampPetersonUibel2022,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Nachhaltige Holzbr{\"u}cken f{\"u}r Geh- und Radwege},
  series = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang},
  booktitle = {Bauphysik Kalender 2022: Holzbau, 22. Jahrgang},
  editor    = {Fouad, Nabil A.},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {9783433033609 (Print)},
  doi       = {10.1002/9783433611081.ch17},
  pages     = {574 -- 592},
  year      = {2022},
  abstract  = {Am Lehr- und Forschungsgebiet Holzbau der Fachhochschule Aachen wurden im Rahmen des Forschungsvorhabens „Nachhaltige Standardbr{\"u}cken in Holzbauweise" Standardtypen f{\"u}r Geh- und Radwegbr{\"u}cken entwickelt. Die Br{\"u}cken sind durch konsequente Umsetzungen von Maßnahmen des konstruktiven Holzschutzes f{\"u}r eine Nutzung von mehr als 80~Jahren konzipiert. Innovative L{\"o}sungen f{\"u}r Bauteile und Anschl{\"u}sse sowie Materialalternativen im Bereich des Belages und der Gel{\"a}nder erm{\"o}glichen eine wartungsarme Konstruktion und tragen somit zur Wirtschaftlichkeit und Nachhaltigkeit bei. Um den Einsatz der entwickelten Standardbr{\"u}ckentypen in der Praxis zu erleichtern, wurden Leistungsverzeichnisse, Musterstatiken, Musterzeichnungen und umfangreiche Detailkataloge als Unterst{\"u}tzung f{\"u}r Planer und Bauherren erstellt. Damit die Randbedingungen f{\"u}r eine lange Lebensdauer w{\"a}hrend der Nutzung der Br{\"u}cke erhalten bleiben, wurden Leitf{\"a}den f{\"u}r die Pflege und Wartung sowie f{\"u}r die Br{\"u}ckenpr{\"u}fung erarbeitet. Der Beitrag gibt Einblicke in das Forschungsvorhaben und seine Resultate.},
  language  = {de}
}
@book{LohseLaumannWolf2016,
  author    = {Lohse, Wolfram and Laumann, J{\"o}rg and Wolf, Christian},
  title     = {Stahlbau, 1: Bemessung von Stahlbauten nach Eurocode mit zahlreichen Beispielen},
  edition   = {25., {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0867-7},
  doi       = {10.1007/978-3-8348-2058-7},
  pages     = {XIII, 572 Seiten},
  year      = {2016},
  language  = {de}
}
@book{UibelPeterson2013,
  author    = {Uibel, Thomas and Peterson, Leif Arne},
  title     = {Tagungsband Aachener Holzbautagung 2013},
  editor    = {Uibel, Thomas and Peterson, Leif Arne},
  publisher = {FH Aachen},
  address   = {Aachen},
  issn      = {2197-4489},
  pages     = {76 Seiten ; Illustrationen, graph. Darst.},
  year      = {2013},
  language  = {de}
}
@article{EgnerHeydeLaumannetal.2015,
  author    = {Egner, Ralf and Heyde, Stefan and Laumann, J{\"o}rg and Prokop, Ines},
  title     = {Vorschl{\"a}ge f{\"u}r eine anwenderfreundliche und praxistaugliche Novellierung der allgemeinen Bemessungsregeln und Regeln f{\"u}r den Hochbau (EN 1993 Teil 1-1)},
  series = {Stahlbau},
  volume    = {84},
  journal   = {Stahlbau},
  number    = {10},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049},
  doi       = {10.1002/stab.201510321},
  pages     = {811 -- 822},
  year      = {2015},
  language  = {de}
}
@phdthesis{Mainz2017,
  author    = {Mainz, Stefan},
  title     = {Zur Berechnung der Tragf{\"a}higkeit von d{\"u}nnwandigen Koppelpfetten aus Kaltprofilen f{\"u}r Biegung um die schwache Achse und Torsion},
  address   = {Hamburg},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:1373-opus-3798},
  pages     = {261 Seiten},
  year      = {2017},
  language  = {de}
}
@book{LohseLaumannWolf2020,
  author    = {Lohse, Wolfram and Laumann, J{\"o}rg and Wolf, Christian},
  title     = {Stahlbau 2},
  edition   = {21., vollst. akt. und {\"u}berarb. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-2116-4},
  doi       = {10.1007/978-3-8348-2116-4},
  year      = {2020},
  language  = {de}
}
@inproceedings{MohanGrossMenzeletal.2021,
  author    = {Mohan, Nijanthan and Groß, Rolf Fritz and Menzel, Karsten and Theis, Fabian},
  title     = {Opportunities and Challenges in the Implementation of Building Information Modeling for Prefabrication of Heating, Ventilation and Air Conditioning Systems in Small and Medium-Sized Contracting Companies in Germany - A Case Study},
  series = {WIT Transactions on The Built Environment, Vol. 205},
  booktitle = {WIT Transactions on The Built Environment, Vol. 205},
  publisher = {WIT Press},
  address   = {Southampton},
  issn      = {1743-3509},
  doi       = {10.2495/BIM210101},
  pages     = {117 -- 126},
  year      = {2021},
  abstract  = {Even though BIM (Building Information Modelling) is successfully implemented in most of the world, it is still in the early stages in Germany, since the stakeholders are sceptical of its reliability and efficiency. The purpose of this paper is to analyse the opportunities and obstacles to implementing BIM for prefabrication. Among all other advantages of BIM, prefabrication is chosen for this paper because it plays a vital role in creating an impact on the time and cost factors of a construction project. The project stakeholders and participants can explicitly observe the positive impact of prefabrication, which enables the breakthrough of the scepticism factor among the small-scale construction companies. The analysis consists of the development of a process workflow for implementing prefabrication in building construction followed by a practical approach, which was executed with two case studies. It was planned in such a way that, the first case study gives a first-hand experience for the workers at the site on the BIM model so that they can make much use of the created BIM model, which is a better representation compared to the traditional 2D plan. The main aim of the first case study is to create a belief in the implementation of BIM Models, which was succeeded by the execution of offshore prefabrication in the second case study. Based on the case studies, the time analysis was made and it is inferred that the implementation of BIM for prefabrication can reduce construction time, ensures minimal wastes, better accuracy, less problem-solving at the construction site. It was observed that this process requires more planning time, better communication between different disciplines, which was the major obstacle for successful implementation. This paper was carried out from the perspective of small and medium-sized mechanical contracting companies for the private building sector in Germany.},
  language  = {en}
}
@incollection{Streit2016,
  author    = {Streit, Wilfried},
  title     = {Kalkulation},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  edition   = {9., {\"u}berarb. und aktual. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02838-1 (Online)},
  doi       = {10.1007/978-3-658-02838-1_13},
  pages     = {1391 -- 1501},
  year      = {2016},
  abstract  = {Das Kapitel behandelt die Kosten- und Preisermittlung, die Kostenvorgabe und Kostenkontrolle. Der Angebotspreis wird aufgeschl{\"u}sselt in die Einzelkosten der Teilleistungen, die Baustellengemeinkosten, die Allgemeinen Gesch{\"a}ftskosten und einen Zuschlag f{\"u}r Wagnis und Gewinn. Auf der Basis der Angebotskalkulation werden die Vorgaben f{\"u}r die Kostenkontrolle entwickelt.},
  language  = {de}
}
@article{CheenakulaPaulsenOttetal.2023,
  author    = {Cheenakula, Dheeraja and Paulsen, Svea and Ott, Fabian and Gr{\"o}mping, Markus},
  title     = {Operational window of a deammonifying sludge for mainstream application in a municipal wastewater treatment plant},
  series = {Water and Environment Journal},
  volume    = {38},
  journal   = {Water and Environment Journal},
  number    = {1},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {1747-6593},
  doi       = {10.1111/wej.12898},
  pages     = {59 -- 70},
  year      = {2023},
  abstract  = {The present work aimed to study the mainstream feasibility of the deammonifying sludge of side stream of municipal wastewater treatment plant (MWWTP) in Kaster, Germany. For this purpose, the deammonifying sludge available at the side stream was investigated for nitrogen (N) removal with respect to the operational factors temperature (15-30°C), pH value (6.0-8.0) and chemical oxygen demand (COD)/N ratio (≤1.5-6.0). The highest and lowest N-removal rates of 0.13 and 0.045 kg/(m³ d) are achieved at 30 and 15°C, respectively. Different conditions of pH and COD/N ratios in the SBRs of Partial nitritation/anammox (PN/A) significantly influenced both the metabolic processes and associated N-removal rates. The scientific insights gained from the current work signifies the possibility of mainstream PN/A at WWTPs. The current study forms a solid basis of operational window for the upcoming semi-technical trails to be conducted prior to the full-scale mainstream PN/A at WWTP Kaster and WWTPs globally.},
  language  = {en}
}
@incollection{Streit2019,
  author    = {Streit, Wilfried},
  title     = {Kalkulation},
  series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-23127-9},
  doi       = {10.1007/978-3-658-23127-9_11},
  pages     = {273 -- 334},
  year      = {2019},
  language  = {de}
}