@inproceedings{GehlerOberBloebaumDachwald2009,
  author    = {Gehler, M. and Ober-Bl{\"o}baum, S. and Dachwald, Bernd},
  title     = {Application of discrete mechanics and optimal control to spacecraft in non-keplerian motion around small solar system bodies},
  series = {Procceedings of the 60th International Astronautical Congress},
  booktitle = {Procceedings of the 60th International Astronautical Congress},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-161567908-9},
  pages     = {1360 -- 1371},
  year      = {2009},
  abstract  = {Prolonged operations close to small solar system bodies require a sophisticated control logic to minimize propellant mass and maximize operational efficiency. A control logic based on Discrete Mechanics and Optimal Control (DMOC) is proposed and applied to both conventionally propelled and solar sail spacecraft operating at an arbitrarily shaped asteroid in the class of Itokawa. As an example, stand-off inertial hovering is considered, recently identified as a challenging part of the Marco Polo mission. The approach is easily extended to stand-off orbits. We show that DMOC is applicable to spacecraft control at small objects, in particular with regard to the fact that the changes in gravity are exploited by the algorithm to optimally control the spacecraft position. Furthermore, we provide some remarks on promising developments.},
  language  = {en}
}
@article{DachwaldSeboldt2003,
  author    = {Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Solar sailcraft of the first generation technology development / Seboldt, Wolfgang ; Dachwald, Bernd},
  year      = {2003},
  language  = {en}
}
@inproceedings{Dachwald2017,
  author    = {Dachwald, Bernd},
  title     = {Radiation pressure force model for an ideal laser-enhanced solar sail},
  series = {4th International Symposium on Solar Sailing},
  booktitle = {4th International Symposium on Solar Sailing},
  pages     = {1 -- 5},
  year      = {2017},
  abstract  = {The concept of a laser-enhanced solar sail is introduced and the radiation pressure force model for an ideal laser-enhanced solar sail is derived. A laser-enhanced solar sail is a "traditional" solar sail that is, however, not solely propelled by solar radiation, but additionally by a laser beam that illuminates the sail. The additional laser radiation pressure increases the sail's propulsive force and can give, depending on the location of the laser source, more control authority over the direction of the solar sail's propulsive force vector. This way, laser-enhanced solar sails may augment already existing solar sail mission concepts and make novel mission concepts feasible.},
  language  = {en}
}
@inproceedings{PhamStaat2015,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {A simplification for shakedown analysis of hardening structures},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@article{VuStaat2004,
  author    = {Vu, Duc-Khoi and Staat, Manfred},
  title     = {An algorithm for shakedown analysis of structure with temperature dependent yield stress},
  year      = {2004},
  abstract  = {This work is an attempt to answer the question: How to use convex programming in shakedown analysis of structures made of materials with temperature-dependent properties. Based on recently established shakedown theorems and formulations, a dual relationship between upper and lower bounds of the shakedown limit load is found, an algorithmfor shakedown analysis is proposed. While the original problem is neither convex nor concave, the algorithm presented here has the advantage of employing convex programming tools.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{CiritsisHorbachStaatetal.2018,
  author    = {Ciritsis, Alexander and Horbach, Andreas and Staat, Manfred and Kuhl, Christiane K. and Kraemer, Nils Andreas},
  title     = {Porosity and tissue integration of elastic mesh implants evaluated in vitro and in vivo},
  series = {Journal of Biomedical Materials Research: Part B: Applied Biomaterials},
  volume    = {106},
  journal   = {Journal of Biomedical Materials Research: Part B: Applied Biomaterials},
  number    = {2},
  publisher = {Wiley},
  address   = {New York, NY},
  issn      = {1552-4981},
  doi       = {10.1002/jbm.b.33877},
  pages     = {827 -- 833},
  year      = {2018},
  abstract  = {Purpose In vivo, a loss of mesh porosity triggers scar tissue formation and restricts functionality. The purpose of this study was to evaluate the properties and configuration changes as mesh deformation and mesh shrinkage of a soft mesh implant compared with a conventional stiff mesh implant in vitro and in a porcine model. Material and Methods Tensile tests and digital image correlation were used to determine the textile porosity for both mesh types in vitro. A group of three pigs each were treated with magnetic resonance imaging (MRI) visible conventional stiff polyvinylidene fluoride meshes (PVDF) or with soft thermoplastic polyurethane meshes (TPU) (FEG Textiltechnik mbH, Aachen, Germany), respectively. MRI was performed with a pneumoperitoneum at a pressure of 0 and 15 mmHg, which resulted in bulging of the abdomen. The mesh-induced signal voids were semiautomatically segmented and the mesh areas were determined. With the deformations assessed in both mesh types at both pressure conditions, the porosity change of the meshes after 8 weeks of ingrowth was calculated as an indicator of preserved elastic properties. The explanted specimens were examined histologically for the maturity of the scar (collagen I/III ratio). Results In TPU, the in vitro porosity increased constantly, in PVDF, a loss of porosity was observed under mild stresses. In vivo, the mean mesh areas of TPU were 206.8 cm2 (± 5.7 cm2) at 0 mmHg pneumoperitoneum and 274.6 cm2 (± 5.2 cm2) at 15 mmHg; for PVDF the mean areas were 205.5 cm2 (± 8.8 cm2) and 221.5 cm2 (± 11.8 cm2), respectively. The pneumoperitoneum-induced pressure increase resulted in a calculated porosity increase of 8.4\% for TPU and of 1.2\% for PVDF. The mean collagen I/III ratio was 8.7 (± 0.5) for TPU and 4.7 (± 0.7) for PVDF. Conclusion The elastic properties of TPU mesh implants result in improved tissue integration compared to conventional PVDF meshes, and they adapt more efficiently to the abdominal wall. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 827-833, 2018.},
  language  = {en}
}
@misc{HacklWegmannKahmannetal.2017,
  author    = {Hackl, Michael and Wegmann, Kilian and Kahmann, Stephanie Lucina and Heinze, Nicolai and Staat, Manfred and Neiss, Wolfram F. and Scaal, Martin and M{\"u}ller, Lars P.},
  title     = {Reply to the letter to the editor: shortening osteotomy of the proximal radius},
  series = {Knee Surgery, Sports Traumatology, Arthroscopy},
  volume    = {25},
  journal   = {Knee Surgery, Sports Traumatology, Arthroscopy},
  number    = {10},
  doi       = {10.1007/s00167-017-4666-8},
  pages     = {3328 -- 3329},
  year      = {2017},
  language  = {en}
}
@incollection{DachwaldOhndorf2019,
  author    = {Dachwald, Bernd and Ohndorf, Andreas},
  title     = {Global optimization of continuous-thrust trajectories using evolutionary neurocontrol},
  series = {Modeling and Optimization in Space Engineering},
  booktitle = {Modeling and Optimization in Space Engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-10501-3},
  doi       = {10.1007/978-3-030-10501-3_2},
  pages     = {33 -- 57},
  year      = {2019},
  abstract  = {Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.},
  language  = {en}
}
@inproceedings{TranMatthiesStavroulakisetal.2018,
  author    = {Tran, Ngoc Trinh and Matthies, Hermann G. and Stavroulakis, Georgios Eleftherios and Staat, Manfred},
  title     = {Direct plastic structural design by chance constrained programming},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {12 Seiten},
  year      = {2018},
  abstract  = {We propose a stochastic programming method to analyse limit and shakedown of structures under random strength with lognormal distribution. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit or the shakedown limit. The edge-based smoothed finite element method (ES-FEM) using three-node linear triangular elements is used.},
  language  = {en}
}
@article{StaatHeitzerLangetal.2005,
  author    = {Staat, Manfred and Heitzer, M. and Lang, H. and Wirtz, K.},
  title     = {Direct Finite Element Route for Design-by-Analysis of Pressure Components},
  series = {International Journal of Pressure Vessels and Piping. 82 (2005), H. 1},
  journal   = {International Journal of Pressure Vessels and Piping. 82 (2005), H. 1},
  isbn      = {0308-0161},
  pages     = {61 -- 67},
  year      = {2005},
  language  = {en}
}