@article{DittusTuryshevDachwaldetal.2005,
  author    = {Dittus, H. and Turyshev, S. G. and Dachwald, Bernd and Blome, Hans-Joachim},
  title     = {A Mission to Explore the Pioneer Anomaly},
  series = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  journal   = {Proceedings of the 39th ESLAB Symposium "Trends in Space Science and Cosmic Vision 2020" : 19 - 21 April 2005, ESTEC, Noordwijk, the Netherlands / European Space Agency. [Comp. by: F. Favata ...] . - (ESA SP ; 588)},
  publisher = {ESA Publ. Div.},
  address   = {Noordwijk},
  isbn      = {9290928999},
  pages     = {3 -- 10},
  year      = {2005},
  language  = {en}
}
@article{NaetherAugerPoghossianetal.2004,
  author    = {N{\"a}ther, Niko and Auger, V. and Poghossian, Arshak and Koudelka-Hep, M. and Sch{\"o}ning, Michael Josef},
  title     = {A miniaturized flow-through cell in SU-8 technique for EIS sensors},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {994 -- 995},
  year      = {2004},
  language  = {en}
}
@article{Artmann1986,
  author    = {Artmann, Gerhard},
  title     = {A microscopic photometric method for measuring erythrocyte deformability. Artmann, Gerhard Michael},
  series = {Clinical Hemorheology. 6 (1986)},
  journal   = {Clinical Hemorheology. 6 (1986)},
  isbn      = {0271-5198},
  pages     = {617 -- 627},
  year      = {1986},
  language  = {en}
}
@article{MorenoiCodinachsBirkenstockGarmaetal.2009,
  author    = {Moreno i Codinachs, L. and Birkenstock, C. and Garma, T. and Zierold, R. and Bachmann, J. and Nielsch, K. and Sch{\"o}ning, Michael Josef and Fontcuberta i Morral, A.},
  title     = {A micron-sized nanoporous multifunction sensing device},
  series = {physica status solidi (a) . 206 (2009), H. 3},
  journal   = {physica status solidi (a) . 206 (2009), H. 3},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1862-6319},
  pages     = {435 -- 441},
  year      = {2009},
  language  = {en}
}
@article{OrzadaLaddBitz2016,
  author    = {Orzada, Stephan and Ladd, Mark E. and Bitz, Andreas},
  title     = {A method to approximate maximum local SAR in multichannel transmit MR systems without transmit phase information},
  series = {Magnetic Resonance in Medicine},
  volume    = {78},
  journal   = {Magnetic Resonance in Medicine},
  number    = {2},
  publisher = {International Society for Magnetic Resonance in Medicine},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.26398},
  pages     = {805 -- 811},
  year      = {2016},
  abstract  = {Purpose To calculate local specific absorption rate (SAR) correctly, both the amplitude and phase of the signal in each transmit channel have to be known. In this work, we propose a method to derive a conservative upper bound for the local SAR, with a reasonable safety margin without knowledge of the transmit phases of the channels. Methods The proposed method uses virtual observation points (VOPs). Correction factors are calculated for each set of VOPs that prevent underestimation of local SAR when the VOPs are applied with the correct amplitudes but fixed phases. Results The proposed method proved to be superior to the worst-case calculation based on the maximum eigenvalue of the VOPs. The mean overestimation for six coil setups could be reduced, whereas no underestimation of the maximum local SAR occurred. In the best investigated case, the overestimation could be reduced from a factor of 3.3 to a factor of 1.7. Conclusion The upper bound for the local SAR calculated with the proposed method allows a fast estimation of the local SAR based on power measurements in the transmit channels and facilitates SAR monitoring in systems that do not have the capability to monitor transmit phases},
  language  = {en}
}
@article{Ziemons1988,
  author    = {Ziemons, Karl},
  title     = {A measurement of the spin asymmetry of the structure function g1 in deep inelastic muon-proton scattering},
  series = {Physics Letters B},
  volume    = {206},
  journal   = {Physics Letters B},
  number    = {2},
  isbn      = {0370-2693},
  pages     = {364 -- 370},
  year      = {1988},
  abstract  = {The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured over a large x range (0.01<x<0.7). The spin-dependent structure function g1(x) for the proton has been determined and its integral over x found to be 0.114±0.012±0.026, in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Bjorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These values for the integrals of g1 lead to the conclusion that the total quark spin constitutes a rather small fraction of the spin of the nucleon.},
  language  = {en}
}
@article{Ziemons1993,
  author    = {Ziemons, Karl},
  title     = {A measurement of the ratio of the nucleon structure function in copper and deuterium},
  series = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  volume    = {57},
  journal   = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  number    = {2},
  isbn      = {1431-5858},
  pages     = {211 -- 218},
  year      = {1993},
  abstract  = {Results are presented on the ratios of the nucleon structure function in copper to deuterium from two separate experiments. The data confirm that the nucleon structure function,F 2, is different for bound nucleons than for the quasi-free ones in the deuteron. The redistribution in the fraction of the nucleon's momentum carried by quarks is investigated and it is found that the data are compatible with no integral loss of quark momenta due to nuclear effects.},
  language  = {en}
}
@article{Hillen1982,
  author    = {Hillen, Walter},
  title     = {A measurement of \&\#963;tot(e+e\&\#8722; \&\#8594; hadrons) for cm energies between 12.0 and 36.7 GeV. TASSO Collaboration},
  series = {Physics Letters B. 113 (1982), H. 6},
  journal   = {Physics Letters B. 113 (1982), H. 6},
  pages     = {499 -- 508},
  year      = {1982},
  language  = {en}
}
@article{FleischhakerEvers2011,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {A Maxwell-Schr{\"o}dinger solver for quantum optical few-level systems},
  series = {Computer Physics Communications},
  volume    = {182},
  journal   = {Computer Physics Communications},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0010-4655},
  doi       = {10.1016/j.cpc.2010.10.018},
  pages     = {739 -- 747},
  year      = {2011},
  abstract  = {The msprop program presented in this work is capable of solving the Maxwell-Schr{\"o}dinger equations for one or several laser fields propagating through a medium of quantum optical few-level systems in one spatial dimension and in time. In particular, it allows to numerically treat systems in which a laser field interacts with the medium with both its electric and magnetic component at the same time. The internal dynamics of the few-level system is modeled by a quantum optical master equation which includes coherent processes due to optical transitions driven by the laser fields as well as incoherent processes due to decay and dephasing. The propagation dynamics of the laser fields is treated in slowly varying envelope approximation resulting in a first order wave equation for each laser field envelope function. The program employs an Adams predictor formula second order in time to integrate the quantum optical master equation and a Lax-Wendroff scheme second order in space and time to evolve the wave equations for the fields. The source function in the Lax-Wendroff scheme is specifically adapted to allow taking into account the simultaneous coupling of a laser field to the polarization and the magnetization of the medium. To reduce execution time, a customized data structure is implemented and explained. In three examples the features of the program are demonstrated and the treatment of a system with a phase-dependent cross coupling of the electric and magnetic field component of a laser field is shown.},
  language  = {en}
}
@article{Grotendorst1991,
  author    = {Grotendorst, Johannes},
  title     = {A Maple package for transforming series, sequences and functions},
  series = {Computer Physics Communications. 67 (1991), H. 2},
  journal   = {Computer Physics Communications. 67 (1991), H. 2},
  isbn      = {0010-4655},
  pages     = {325 -- 342},
  year      = {1991},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@article{NiemuellerFerreinLakemeyer2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {A Lua-based Behavior Engine for Controlling the Humanoid Robot Nao},
  series = {RoboCup 2009: Robot Soccer World Cup XIII},
  journal   = {RoboCup 2009: Robot Soccer World Cup XIII},
  pages     = {240 -- 251},
  year      = {2010},
  language  = {en}
}
@article{SchoeningThustVetteretal.1996,
  author    = {Sch{\"o}ning, Michael Josef and Thust, M. and Vetter, J. and Kordos, P. (u.a.)},
  title     = {A long-term stable penicillin-sensitive potentiometric biosensor with enzyme immobilized by heterobifunctional crosslinking},
  isbn      = {0378-4304},
  pages     = {115 -- 121},
  year      = {1996},
  language  = {en}
}
@article{SimonisRugeMuellerVeggianetal.2003,
  author    = {Simonis, A. and Ruge, C. and M{\"u}ller-Veggian, Mattea and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {A long-term stable macroporoustype EIS structure for electrochemical sensor applications},
  series = {Sensors and Actuators B. 91 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 91 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {21 -- 25},
  year      = {2003},
  language  = {en}
}
@article{FerreinRensMeyeretal.2011,
  author    = {Ferrein, Alexander and Rens, Gavin and Meyer, Thomas and Lakemeyer, Gerhard},
  title     = {A Logic for Specifying Partially Observable Stochastic Domains / Rens, Gavin ; Meyer, Thomas ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Proceedings of the Ninth International Workshop pn non-Monotonic Reasoning, Action and Change (NRAC`11)},
  journal   = {Proceedings of the Ninth International Workshop pn non-Monotonic Reasoning, Action and Change (NRAC`11)},
  pages     = {15 -- 22},
  year      = {2011},
  language  = {en}
}
@article{RensVarzinczakMeyeretal.2010,
  author    = {Rens, Gavin and Varzinczak, Ivan and Meyer, Thomas and Ferrein, Alexander},
  title     = {A Logic for Reasoning about Actions and Explicit Observations},
  series = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  journal   = {AI 2010: Advances in Artificial Intelligence 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-17431-5},
  pages     = {395 -- 404},
  year      = {2010},
  language  = {en}
}
@article{WagnerMolinaBisellietal.2007,
  author    = {Wagner, Torsten and Molina, R. and Biselli, Manfred and Canzoneri, Michele and Schnitzler, Thomas and Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {A light-addressable potentiometric sensor system for fast, simultaneous and spatial detection of the metabolic activity of biological cells},
  series = {Transducers '07 Eurosensors XXI : digest of technical papers ; the14th International Conference on Solid-State Sensors, Actuators and Microsystems, June 10-14, 2007, Lyon, France / Gilles Delapierre (Ed.)},
  journal   = {Transducers '07 Eurosensors XXI : digest of technical papers ; the14th International Conference on Solid-State Sensors, Actuators and Microsystems, June 10-14, 2007, Lyon, France / Gilles Delapierre (Ed.)},
  publisher = {IEEE},
  address   = {Piscataway},
  isbn      = {1-4244-0841-5},
  pages     = {1107 -- 1110},
  year      = {2007},
  language  = {en}
}
@article{DethloffKrollLudwigs2009,
  author    = {Dethloff, Nina and Kroll-Ludwigs, Kathrin},
  title     = {A Lei de Parceria Registrada de 2001 e suas Reformas no Direito Alemao},
  series = {Revista Brasileira de Direito das Fam{\´i}lias e Sucessoes},
  volume    = {11},
  journal   = {Revista Brasileira de Direito das Fam{\´i}lias e Sucessoes},
  number    = {12},
  pages     = {80 -- 94},
  year      = {2009},
  language  = {de}
}
@article{DantismRoehlenWagneretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Wagner, Torsten and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {21},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19214692},
  pages     = {Artikel 4692},
  year      = {2019},
  abstract  = {Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.},
  language  = {en}
}
@article{KonstantinidisFloresMartinezDachwaldetal.2015,
  author    = {Konstantinidis, Konstantinos and Flores Martinez, Claudio and Dachwald, Bernd and Ohndorf, Andreas and Dykta, Paul and Bowitz, Pascal and Rudolph, Martin and Digel, Ilya and Kowalski, Julia and Voigt, Konstantin and F{\"o}rstner, Roger},
  title     = {A lander mission to probe subglacial water on Saturn's moon enceladus for life},
  series = {Acta astronautica},
  volume    = {Vol. 106},
  journal   = {Acta astronautica},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2030 (E-Journal); 0094-5765 (Print)},
  pages     = {63 -- 89},
  year      = {2015},
  language  = {en}
}
@article{AletseeBaumann1991,
  author    = {Aletsee, Ludwig and Baumann, Marcus},
  title     = {A laboratory incubator equipped with facilities to automatically simulate natural irradiance},
  series = {Boletim do Instituto Oceanogr{\´a}fico / Universidade de S{\~a}o Paulo},
  volume    = {Vol. 39},
  journal   = {Boletim do Instituto Oceanogr{\´a}fico / Universidade de S{\~a}o Paulo},
  number    = {No. 2},
  issn      = {1982-436X; 0080-6331},
  pages     = {155 -- 159},
  year      = {1991},
  language  = {en}
}
@article{NguyenRaatschenStaat2010,
  author    = {Nguyen, N.-H. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {A hyperelastic model of biological tissue materials in tubular organs},
  pages     = {1 -- 12},
  year      = {2010},
  language  = {en}
}
@article{UlmerBraunChengetal.2023,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {A human factors-aware assistance system in manufacturing based on gamification and hardware modularisation},
  series = {International Journal of Production Research},
  journal   = {International Journal of Production Research},
  publisher = {Taylor \& Francis},
  issn      = {0020-7543 (Print)},
  doi       = {10.1080/00207543.2023.2166140},
  year      = {2023},
  abstract  = {Assistance systems have been widely adopted in the manufacturing sector to facilitate various processes and tasks in production environments. However, existing systems are mostly equipped with rigid functional logic and do not provide individual user experiences or adapt to their capabilities. This work integrates human factors in assistance systems by adjusting the hardware and instruction presented to the workers' cognitive and physical demands. A modular system architecture is designed accordingly, which allows a flexible component exchange according to the user and the work task. Gamification, the use of game elements in non-gaming contexts, has been further adopted in this work to provide level-based instructions and personalised feedback. The developed framework is validated by applying it to a manual workstation for industrial assembly routines.},
  language  = {en}
}
@article{CzarneckiSpiliopoulou2012,
  author    = {Czarnecki, Christian and Spiliopoulou, Myra},
  title     = {A holistic framework for the implementation of a next generation network},
  series = {International Journal of Business Information Systems},
  volume    = {9},
  journal   = {International Journal of Business Information Systems},
  number    = {4},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {1746-0972},
  doi       = {10.1504/IJBIS.2012.046291},
  pages     = {385 -- 401},
  year      = {2012},
  abstract  = {As the potential of a next generation network (NGN) is recognised, telecommunication companies consider switching to it. Although the implementation of an NGN seems to be merely a modification of the network infrastructure, it may trigger or require changes in the whole company, because it builds upon the separation between service and transport, a flexible bundling of services to products and the streamlining of the IT infrastructure. We propose a holistic framework, structured into the layers 'strategy', 'processes' and 'information systems' and incorporate into each layer all concepts necessary for the implementation of an NGN, as well as the alignment of these concepts. As a first proof-of-concept for our framework we have performed a case study on the introduction of NGN in a large telecommunication company; we show that our framework captures all topics that are affected by an NGN implementation.},
  language  = {en}
}
@article{RauschFriesenAltherretal.2018,
  author    = {Rausch, Lea and Friesen, John and Altherr, Lena and Meck, Marvin and Pelz, Peter F.},
  title     = {A holistic concept to design optimal water supply infrastructures for informal settlements using remote sensing data},
  series = {Remote Sensing},
  volume    = {10},
  journal   = {Remote Sensing},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {2072-4292},
  doi       = {10.3390/rs10020216},
  pages     = {1 -- 23},
  year      = {2018},
  abstract  = {Ensuring access to water and sanitation for all is Goal No. 6 of the 17 UN Sustainability Development Goals to transform our world. As one step towards this goal, we present an approach that leverages remote sensing data to plan optimal water supply networks for informal urban settlements. The concept focuses on slums within large urban areas, which are often characterized by a lack of an appropriate water supply. We apply methods of mathematical optimization aiming to find a network describing the optimal supply infrastructure. Hereby, we choose between different decentral and central approaches combining supply by motorized vehicles with supply by pipe systems. For the purposes of illustration, we apply the approach to two small slum clusters in Dhaka and Dar es Salaam. We show our optimization results, which represent the lowest cost water supply systems possible. Additionally, we compare the optimal solutions of the two clusters (also for varying input parameters, such as population densities and slum size development over time) and describe how the result of the optimization depends on the entered remote sensing data.},
  language  = {en}
}
@article{GerhardsBelloumBerretzetal.2010,
  author    = {Gerhards, M. and Belloum, A. and Berretz, F. and Sander, Volker and Skorupa, S.},
  title     = {A history-tracing XML-based provenance framework for workflows},
  isbn      = {978-1-4244-8989-3},
  pages     = {1 -- 10},
  year      = {2010},
  language  = {en}
}
@article{SchoeningTsarouchasSchaubetal.1996,
  author    = {Sch{\"o}ning, Michael Josef and Tsarouchas, D. and Schaub, A. and Beckers, L. (u.a.)},
  title     = {A highly long-term stable silicon-based pH sensor using pulsed laser deposition technique},
  series = {Sensors and Actuators B. 35 (1996), H. 1-3},
  journal   = {Sensors and Actuators B. 35 (1996), H. 1-3},
  isbn      = {0925-4005},
  pages     = {228 -- 233},
  year      = {1996},
  language  = {en}
}
@article{GossmannThomasHorvathetal.2020,
  author    = {Gossmann, Matthias and Thomas, Ulrich and Horv{\´a}th, Andr{\´a}s and Dragicevic, Elena and Stoelzle-Feix, Sonja and Jung, Alexander and Raman, Aravind Hariharan and Staat, Manfred and Linder, Peter},
  title     = {A higher-throughput approach to investigate cardiac contractility in vitro under physiological mechanical conditions},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {105},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article 106843},
  publisher = {Elsevier},
  address   = {New York, NY},
  doi       = {10.1016/j.vascn.2020.106843},
  year      = {2020},
  language  = {en}
}
@article{BouwmanGuldenHeijdenetal.2013,
  author    = {Bouwman, Peter and Gulden, Hanneke van der and Heijden, Ingrid van der and Drost, Rinske and Klijn, Christiaan N. and Prasetyanti, Pramudita and Pieterse, Mark and Wientjens, Ellen and Seibler, Jost and Hogervorst, Frank B. L. and Jonkers, Jos},
  title     = {A High-Throughput Functional Complementation Assay for Classification of BRCA1 Missense Variants},
  series = {Cancer Discovery},
  journal   = {Cancer Discovery},
  number    = {3},
  issn      = {2159-8290},
  doi       = {10.1158/2159-8290.CD-13-0094},
  pages     = {1142 -- 1152},
  year      = {2013},
  language  = {en}
}
@article{MiyamotoHayashiSakamotoetal.2017,
  author    = {Miyamoto, Ko-ichiro and Hayashi, Kosuke and Sakamoto, Azuma and Werner, Frederik and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {A high-Q resonance-mode measurement of EIS capacitive sensor by elimination of series resistance},
  series = {Sensor and Actuators B: Chemical},
  volume    = {248},
  journal   = {Sensor and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2017.03.002},
  pages     = {1006 -- 1010},
  year      = {2017},
  abstract  = {An EIS capacitive sensor is a semiconductor-based potentiometric sensor, which is sensitive to the ion concentration or pH value of the solution in contact with the sensing surface. To detect a small change in the ion concentration or pH, a small capacitance change must be detected. Recently, a resonance-mode measurement was proposed, in which an inductor was connected to the EIS capacitive sensor and the resonant frequency was correlated with the pH value. In this study, the Q factor of the resonant circuit was enhanced by canceling the internal resistance of the reference electrode and the internal resistance of the inductor coil with the help of a bypass capacitor and a negative impedance converter, respectively. 1\% variation of the signal in the developed system corresponded to a pH change of 3.93 mpH, which was about 1/12 of the conventional method, suggesting a better performance in detection of a small pH change.},
  language  = {en}
}
@article{WagnerWernerMiyamotoetal.2009,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, K. and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {A high-density multi-point LAPS set-up using a VCSEL array and FPGA control},
  series = {Procedia Chemistry. 1 (2009), H. 1},
  journal   = {Procedia Chemistry. 1 (2009), H. 1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1876-6196},
  pages     = {1483 -- 1486},
  year      = {2009},
  language  = {en}
}
@article{WagnerWernerMiyamotoetal.2011,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, Ko-Ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {A high-density multi-point LAPS set-up using a VCSEL array and FPGA control},
  series = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  journal   = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1873-3077},
  pages     = {124 -- 128},
  year      = {2011},
  language  = {en}
}
@article{WagnerSchoeningOttoetal.2004,
  author    = {Wagner, Torsten and Sch{\"o}ning, Michael Josef and Otto, R. and Yoshinobu, T.},
  title     = {A handheld 16 channel pen-type LAPS as a platform for (bio-)electrochemical sensing},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {996 -- 997},
  year      = {2004},
  language  = {en}
}
@article{BaringhausGaigall2022,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {A goodness-of-fit test for the compound Poisson exponential model},
  series = {Journal of Multivariate Analysis},
  volume    = {195},
  journal   = {Journal of Multivariate Analysis},
  number    = {Article 105154},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-259X},
  doi       = {10.1016/j.jmva.2022.105154},
  year      = {2022},
  abstract  = {On the basis of bivariate data, assumed to be observations of independent copies of a random vector (S,N), we consider testing the hypothesis that the distribution of (S,N) belongs to the parametric class of distributions that arise with the compound Poisson exponential model. Typically, this model is used in stochastic hydrology, with N as the number of raindays, and S as total rainfall amount during a certain time period, or in actuarial science, with N as the number of losses, and S as total loss expenditure during a certain time period. The compound Poisson exponential model is characterized in the way that a specific transform associated with the distribution of (S,N) satisfies a certain differential equation. Mimicking the function part of this equation by substituting the empirical counterparts of the transform we obtain an expression the weighted integral of the square of which is used as test statistic. We deal with two variants of the latter, one of which being invariant under scale transformations of the S-part by fixed positive constants. Critical values are obtained by using a parametric bootstrap procedure. The asymptotic behavior of the tests is discussed. A simulation study demonstrates the performance of the tests in the finite sample case. The procedure is applied to rainfall data and to an actuarial dataset. A multivariate extension is also discussed.},
  language  = {en}
}
@article{TopcuMadabhushiStaat2022,
  author    = {Top{\c{c}}u, Murat and Madabhushi, Gopal S.P. and Staat, Manfred},
  title     = {A generalized shear-lag theory for elastic stress transfer between matrix and fibres having a variable radius},
  series = {International Journal of Solids and Structures},
  volume    = {239-240},
  journal   = {International Journal of Solids and Structures},
  number    = {Art. No. 111464},
  publisher = {Elsevier},
  address   = {New York, NY},
  issn      = {0020-7683},
  doi       = {10.1016/j.ijsolstr.2022.111464},
  year      = {2022},
  abstract  = {A generalized shear-lag theory for fibres with variable radius is developed to analyse elastic fibre/matrix stress transfer. The theory accounts for the reinforcement of biological composites, such as soft tissue and bone tissue, as well as for the reinforcement of technical composite materials, such as fibre-reinforced polymers (FRP). The original shear-lag theory proposed by Cox in 1952 is generalized for fibres with variable radius and with symmetric and asymmetric ends. Analytical solutions are derived for the distribution of axial and interfacial shear stress in cylindrical and elliptical fibres, as well as conical and paraboloidal fibres with asymmetric ends. Additionally, the distribution of axial and interfacial shear stress for conical and paraboloidal fibres with symmetric ends are numerically predicted. The results are compared with solutions from axisymmetric finite element models. A parameter study is performed, to investigate the suitability of alternative fibre geometries for use in FRP.},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Generalization of the Txx Network Analyzer Self-Calibration Procedure},
  series = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  journal   = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  publisher = {Microwave Exhibitions and Publishers},
  address   = {Tunbridge Wells},
  isbn      = {0-946821-77-1},
  pages     = {907 -- 912},
  year      = {1992},
  language  = {en}
}
@article{FerreinSchifferLakemeyer2008,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {A Fuzzy Set Semantics for Qualitative Fluents in the Situation Calculus / Ferrein, Alexander ; Schiffer, Stefan ; Lakemeyer, Gerhard},
  series = {Intelligent Robotics and Applications : First International Conference, ICIRA 2008 Wuhan, China, October 15-17, 2008 Proceedings, Part I},
  journal   = {Intelligent Robotics and Applications : First International Conference, ICIRA 2008 Wuhan, China, October 15-17, 2008 Proceedings, Part I},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {498 -- 509},
  year      = {2008},
  language  = {en}
}
@article{Hoettges1992,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation},
  series = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  journal   = {Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell},
  publisher = {Computational Mechanics Publications [u.a.]},
  address   = {Southampton [u.a.]},
  isbn      = {185312169X},
  year      = {1992},
  language  = {en}
}
@article{StulpeHellwig1983,
  author    = {Stulpe, Werner and Hellwig, K.-E.},
  title     = {A Formulation of Quantum Stochastic Processes and Some of its Properties. Hellwig, K.-E.; Stulpe, W.},
  series = {Foundations of Physics. 13 (1983), H. 7},
  journal   = {Foundations of Physics. 13 (1983), H. 7},
  isbn      = {1572-9516},
  pages     = {673 -- 699},
  year      = {1983},
  language  = {en}
}
@article{KosterScheidweilerTieves2016,
  author    = {Koster, Arie and Scheidweiler, Robert and Tieves, Martin},
  title     = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  series = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  journal   = {A flow based pruning scheme for enumerative equitable coloring algorithms},
  doi       = {10.48550/arXiv.1607.08754},
  pages     = {1 -- 30},
  year      = {2016},
  abstract  = {An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved. Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.},
  language  = {en}
}
@article{SchiffelsSelmer2015,
  author    = {Schiffels, Johannes and Selmer, Thorsten},
  title     = {A flexible toolbox to study protein-assisted metalloenzyme assembly in vitro},
  series = {Biotechnology and Bioengineering},
  volume    = {112},
  journal   = {Biotechnology and Bioengineering},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1097-0290},
  doi       = {10.1002/bit.25658},
  pages     = {2360 -- 2372},
  year      = {2015},
  language  = {en}
}
@article{SchoeningKloockMourzinaetal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P. and Mourzina, Y. and Schubert, J.},
  title     = {A first step towards a microfabricated thin-film sensor array on the basis of chalcogenide glass materials},
  series = {Sensors. 2 (2002), H. 9},
  journal   = {Sensors. 2 (2002), H. 9},
  isbn      = {1424-8220},
  pages     = {356 -- 365},
  year      = {2002},
  language  = {en}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@article{Jacobs1994,
  author    = {Jacobs, Stephan},
  title     = {A Fault Diagnosis System Using Temporary Relations between Symptoms},
  series = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  journal   = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {379080794X},
  pages     = {XXVI, 550 S : graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{WeberArentMuenchetal.2016,
  author    = {Weber, Tobias and Arent, Jan-Christoph and M{\"u}nch, Lukas and Duhovic, Miro and Balvers, Johannes M.},
  title     = {A fast method for the generation of boundary conditions for thermal autoclave simulation},
  series = {Composites Part A},
  volume    = {88},
  journal   = {Composites Part A},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-835X},
  doi       = {10.1016/j.compositesa.2016.05.036},
  pages     = {216 -- 225},
  year      = {2016},
  abstract  = {Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.},
  language  = {en}
}
@article{SchmitzRoetertPischinger1988,
  author    = {Schmitz, G{\"u}nter and Roetert, J. and Pischinger, M.},
  title     = {A Fast Intelligent VMEbus System for Combustion Analysis in Engines},
  series = {19th [nineteenth] International Symposium on Automotive Technology \& [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.},
  journal   = {19th [nineteenth] International Symposium on Automotive Technology \& [and] Automation : with particular reference to cell control and quality management systems for the manufacturing industries; Monte Carlo, 24. - 28. October 1988.},
  publisher = {Automotive Automation Ltd},
  address   = {Croydon},
  isbn      = {0947719229},
  pages     = {381 -- 391},
  year      = {1988},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Fast and Robust Procedure for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  address   = {Paris},
  pages     = {373 -- 374},
  year      = {1992},
  language  = {en}
}
@article{Bernecker2010,
  author    = {Bernecker, Andreas},
  title     = {A European Private Company: Is Europe's single legal form for SMEs close to approval?},
  series = {Research Briefing},
  journal   = {Research Briefing},
  publisher = {Deutsche Bank Research},
  address   = {Frankfurt a. M.},
  issn      = {2193-5955},
  year      = {2010},
  abstract  = {This Research Briefing, issued in July 2010, concluded that: - Small and medium-sized enterprises (SMEs) in Europe have long called for a matching legal form valid across the EU (similar to that of the European company (SE) for large firms) - The main benefits would be the availability of uniform Europe-wide company structures, significant cost reductions for businesses and further integration of the internal market - Given the differing national views regarding the concrete features of the new legal form there is currently no sign of an agreement being reached at the European level in the short term; however, it is possible that progress will be made in negotiations during the year - The key issues being discussed in depth are company formation, transnationality and employee participation rights in the new European private company (SPE).},
  language  = {en}
}
@article{SchoeningKrauseBlocketal.2003,
  author    = {Sch{\"o}ning, Michael Josef and Krause, R. and Block, K. and Musahmeh, M. and Mulchandani, A. and Wang, J.},
  title     = {A dual amperometric/potentiometric FIA-based biosensor for the distinctive detection of organophosphorus pesticides},
  series = {Sensors and Actuators B. 95 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 95 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {291 -- 296},
  year      = {2003},
  language  = {en}
}
@article{SchoeningKrauseBlocketal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Krause, R. and Block, K. and Musameh, M. and Mulchandani, A. and Wang, J.},
  title     = {A dual amperometric / potentiometric FIA-based biosensor for the distinctive detection of organophosphorus pesticides},
  series = {Book of abstracts / ed. by J. Saneistr.},
  journal   = {Book of abstracts / ed. by J. Saneistr.},
  publisher = {Czech Technical University, Faculty of Electrical Engineering, Department of Measurement},
  address   = {Prague},
  isbn      = {80-01-02576-4},
  pages     = {76 -- 79},
  year      = {2002},
  language  = {en}
}
@article{OehlschlaegerOsenPeileretal.2001,
  author    = {{\"O}hlschl{\"a}ger, Peter and Osen, Wolfram and Peiler, Tanja and Caldeira, Sandra},
  title     = {A DNA vaccine based on a shuffled E7 oncogene of the human papillomavirus type 16 (HPV 16) induces E7-specific cytotoxic T cells but lacks transforming activity / Osen, Wolfram ; Peiler, Tanja ; {\"O}hlschl{\"a}ger, Peter ; Caldeira, Sandra ; Faath, Stefan ; Mich},
  series = {Vaccine. 19 (2001), H. 20},
  journal   = {Vaccine. 19 (2001), H. 20},
  isbn      = {0264-410X},
  pages     = {4276 -- 4286},
  year      = {2001},
  language  = {en}
}
@article{SildatkeKarwanniKraftetal.2023,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {A distributed microservice architecture pattern for the automated generation of information extraction pipelines},
  series = {SN Computer Science},
  journal   = {SN Computer Science},
  number    = {4, Article number: 833},
  publisher = {Springer Singapore},
  address   = {Singapore},
  issn      = {2661-8907},
  doi       = {10.1007/s42979-023-02256-4},
  pages     = {19 Seiten},
  year      = {2023},
  abstract  = {Companies often build their businesses based on product information and therefore try to automate the process of information extraction (IE). Since the information source is usually heterogeneous and non-standardized, classic extract, transform, load techniques reach their limits. Hence, companies must implement the newest findings from research to tackle the challenges of process automation. They require a flexible and robust system that is extendable and ensures the optimal processing of the different document types. This paper provides a distributed microservice architecture pattern that enables the automated generation of IE pipelines. Since their optimal design is individual for each input document, the system ensures the ad-hoc generation of pipelines depending on specific document characteristics at runtime. Furthermore, it introduces the automated quality determination of each available pipeline and controls the integration of new microservices based on their impact on the business value. The introduced system enables fast prototyping of the newest approaches from research and supports companies in automating their IE processes. Based on the automated quality determination, it ensures that the generated pipelines always meet defined business requirements when they come into productive use.},
  language  = {en}
}
@article{SanderFosterRoyetal.2000,
  author    = {Sander, Volker and Foster, Ian and Roy, Alain and Winkler, Linda},
  title     = {A differentiated services implementation for high-performance TCP flows},
  series = {Computer Networks. 34 (2000), H. 6},
  journal   = {Computer Networks. 34 (2000), H. 6},
  isbn      = {1389-1286},
  pages     = {915 -- 929},
  year      = {2000},
  language  = {en}
}
@article{Harder1999,
  author    = {Harder, J{\"o}rn},
  title     = {A crystallographic model for the study of local deformation processes in polycrystals},
  series = {International journal of plasticity. 15 (1999), H. 6},
  journal   = {International journal of plasticity. 15 (1999), H. 6},
  isbn      = {0749-6419},
  pages     = {605 -- 624},
  year      = {1999},
  language  = {en}
}
@article{BohrnMuchaWerneretal.2013,
  author    = {Bohrn, Ulrich and Mucha, Andreas and Werner, Frederik and Trattner, Barbara and B{\"a}cker, Matthias and Krumbe, Christoph and Schienle, Meinrad and St{\"u}tz, Evamaria and Schmitt-Landsiedel, Doris and Fleischer, Maximilian and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {A critical comparison of cell-based sensor systems for the detection of Cr (VI) in aquatic environment},
  series = {Sensors and actuators. B: Chemical},
  volume    = {Vol. 182},
  journal   = {Sensors and actuators. B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  pages     = {58 -- 65},
  year      = {2013},
  language  = {en}
}
@article{LuftBremenLuft2023,
  author    = {Luft, Angela and Bremen, Sebastian and Luft, Nils},
  title     = {A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning},
  series = {Processes},
  volume    = {11},
  journal   = {Processes},
  number    = {7},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9717},
  doi       = {10.3390/pr11071968},
  pages     = {Artikel 1968},
  year      = {2023},
  abstract  = {There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.},
  language  = {en}
}
@article{PietschKurbel1990,
  author    = {Pietsch, Wolfram and Kurbel, Karl},
  title     = {A Cooperative Work Environment for Evolutionary Software Development / Kurbel, K., Pietsch, W.},
  series = {Multi-user interfaces and applications : proceedings of the IFIP WG 8.4 Conference on Multi-User Interfaces and Applications, Heraklion, Crete, Greece, 24 - 26 September, 1990 / ed. by Simon Gibbs ...},
  journal   = {Multi-user interfaces and applications : proceedings of the IFIP WG 8.4 Conference on Multi-User Interfaces and Applications, Heraklion, Crete, Greece, 24 - 26 September, 1990 / ed. by Simon Gibbs ...},
  publisher = {North-Holland Publ.},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-444-88760-1},
  pages     = {115 -- 127},
  year      = {1990},
  language  = {en}
}
@article{HaegerBongaertsSiegert2022,
  author    = {Haeger, Gerrit and Bongaerts, Johannes and Siegert, Petra},
  title     = {A convenient ninhydrin assay in 96-well format for amino acid-releasing enzymes using an air-stable reagent},
  series = {Analytical Biochemistry},
  journal   = {Analytical Biochemistry},
  number    = {624},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1096-0309},
  doi       = {10.1016/j.ab.2022.114819},
  pages     = {Artikel 114819},
  year      = {2022},
  abstract  = {An improved and convenient ninhydrin assay for aminoacylase activity measurements was developed using the commercial EZ Nin™ reagent. Alternative reagents from literature were also evaluated and compared. The addition of DMSO to the reagent enhanced the solubility of Ruhemann's purple (RP). Furthermore, we found that the use of a basic, aqueous buffer enhances stability of RP. An acidic protocol for the quantification of lysine was developed by addition of glacial acetic acid. The assay allows for parallel processing in a 96-well format with measurements microtiter plates.},
  language  = {en}
}
@article{GerlingPoolPredel1983,
  author    = {Gerling, Ulrich and Pool, M. J. and Predel, Bruno},
  title     = {A contribution to the associate model for binary liquid alloys = Ein Beitrag zum Assoziat-Modell f{\"u}r bin{\"a}re fl{\"u}ssige Legierungen},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 9},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 9},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {616 -- 619},
  year      = {1983},
  language  = {en}
}
@article{BreitbachSchubert2004,
  author    = {Breitbach, Gerd and Schubert, F.},
  title     = {A contribution to stress prediction in coatings for gas turbine blades},
  series = {Archive of applied mechanics. 73 (2004), H. 9-10},
  journal   = {Archive of applied mechanics. 73 (2004), H. 9-10},
  isbn      = {0939-1533},
  pages     = {682 -- 689},
  year      = {2004},
  language  = {en}
}
@article{DitzhausGaigall2018,
  author    = {Ditzhaus, Marc and Gaigall, Daniel},
  title     = {A consistent goodness-of-fit test for huge dimensional and functional data},
  series = {Journal of Nonparametric Statistics},
  volume    = {30},
  journal   = {Journal of Nonparametric Statistics},
  number    = {4},
  publisher = {Taylor \& Francis},
  address   = {Abingdon},
  issn      = {1029-0311},
  doi       = {10.1080/10485252.2018.1486402},
  pages     = {834 -- 859},
  year      = {2018},
  abstract  = {A nonparametric goodness-of-fit test for random variables with values in a separable Hilbert space is investigated. To verify the null hypothesis that the data come from a specific distribution, an integral type test based on a Cram{\´e}r-von-Mises statistic is suggested. The convergence in distribution of the test statistic under the null hypothesis is proved and the test's consistency is concluded. Moreover, properties under local alternatives are discussed. Applications are given for data of huge but finite dimension and for functional data in infinite dimensional spaces. A general approach enables the treatment of incomplete data. In simulation studies the test competes with alternative proposals.},
  language  = {en}
}
@article{Koehler2020,
  author    = {K{\"o}hler, Klemens},
  title     = {A conflict theory perspective of IT attacks - consequences for IT security education},
  number    = {Preprint},
  year      = {2020},
  abstract  = {Cyberspace is "the environment formed by physical and non-physical components to store, modify, and exchange data using computer networks" (NATO CCDCOE). Beyond that, it is an environment where people interact. IT attacks are hostile, non-cooperative interactions that can be described with conflict theory. Applying conflict theory to IT security leads to different objectives for end-user education, requiring different formats like agency-based competence developing games.},
  language  = {en}
}
@article{DigelDachwaldArtmannetal.2009,
  author    = {Digel, Ilya and Dachwald, Bernd and Artmann, Gerhard and Linder, Peter and Funke, O.},
  title     = {A concept of a probe for particle analysis and life detection in icy environments},
  pages     = {1 -- 24},
  year      = {2009},
  language  = {en}
}
@article{BhattaraiStaat2019,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse},
  series = {Computer Methods in Biomechanics and Biomedical Engineering: Imaging \& Visualization},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering: Imaging \& Visualization},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {2168-1171},
  doi       = {10.1080/21681163.2019.1670095},
  year      = {2019},
  language  = {en}
}
@article{GerhardtCooperWhitbreadetal.1985,
  author    = {Gerhardt, Hans Joachim and Cooper, K.-R. and Whitbread, R. and Gary, K.-P. (u.a.)},
  title     = {A comparison of aerodynamic drag measurements on model trucks in closed-jet and open-jet wind tunnels},
  pages     = {261 -- 274},
  year      = {1985},
  language  = {en}
}
@article{ScheerWilson2016,
  author    = {Scheer, Nico and Wilson, Ian D.},
  title     = {A comparison between genetically humanized and chimeric liver humanized mouse models for studies in drug metabolism and toxicity},
  series = {Drug Discovery Today},
  volume    = {21},
  journal   = {Drug Discovery Today},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-6446},
  doi       = {10.1016/j.drudis.2015.09.002},
  pages     = {250 -- 263},
  year      = {2016},
  abstract  = {Mice that have been genetically humanized for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging and promising in vivo models for an improved prediction of the pharmacokinetic, drug-drug interaction and safety characteristics of compounds in humans. The specific advantages and disadvantages of these models should be carefully considered when using them for studies in drug discovery and development. Here, an overview on the corresponding genetically humanized and chimeric liver humanized mouse models described to date is provided and illustrated with examples of their utility in drug metabolism and toxicity studies. We compare the strength and weaknesses of the two different approaches, give guidance for the selection of the appropriate model for various applications and discuss future trends and perspectives.},
  language  = {en}
}
@article{StreunLarueParletal.2009,
  author    = {Streun, M. and Larue, H. and Parl, C. and Ziemons, Karl},
  title     = {A compact PET detector readout using charge-to-time conversion},
  series = {2009 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)},
  journal   = {2009 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {1082-3654},
  pages     = {1868 -- 1870},
  year      = {2009},
  abstract  = {The readout of gamma detectors is considerably simplified when the event intensity is encoded as a pulse width (Pulse Width Modulation, PWM). Time-to-Digital-Converters (TDC) replace the conventional ADCs and multiple TDCs can be realized easily in one PLD chip (Programmable Logic Device). The output of a PWM stage is only one digital signal per channel which is well suited for transport so that further processing can be performed apart from the detector. This is particularly interesting for large systems with high channel density (e.g. high resolution scanners). In this work we present a circuit with a linear transfer function that requires a minimum of components by performing the PWM already in the preamp stage. This allows a very compact and also cost-efficient implementation of the front-end electronics.},
  language  = {en}
}
@article{DachwaldTsinas1994,
  author    = {Dachwald, Bernd and Tsinas, L.},
  title     = {A combined neural and genetic learning algorithm / Tsinas, L. ; Dachwald, B.},
  series = {Proceedings of the First IEEE Conference on Evolutionary Computation, 1994. IEEE World Congress on Computational Intelligence.},
  journal   = {Proceedings of the First IEEE Conference on Evolutionary Computation, 1994. IEEE World Congress on Computational Intelligence.},
  address   = {Orlando, Fl},
  isbn      = {0-7803-1899-4},
  pages     = {770 -- 774},
  year      = {1994},
  language  = {en}
}
@article{StulpeHellwig1993,
  author    = {Stulpe, Werner and Hellwig, K.-E.},
  title     = {A Classical Reformulation of Finite-Dimensional Quantum Mechanics. Hellwig, K.-E.; Stulpe, W.},
  series = {Quantum measurement, irreversibility and the physics of information / Symposium on the Foundations of Modern Physics 1993, Cologne, Germany 1 - 5 June 1993. Ed. Paul Busch},
  journal   = {Quantum measurement, irreversibility and the physics of information / Symposium on the Foundations of Modern Physics 1993, Cologne, Germany 1 - 5 June 1993. Ed. Paul Busch},
  publisher = {World Scientific},
  address   = {Singapore [u.a.]},
  isbn      = {981021507X},
  pages     = {209 -- 214},
  year      = {1993},
  language  = {en}
}
@article{BiselliNollMuehlsiepenetal.2000,
  author    = {Biselli, Manfred and Noll, Thomas and M{\"u}hlsiepen, Heinz and Engels, Ralf},
  title     = {A cell-culture reactor for the on-line evaluation of radiopharmaceuticals : evaluation of the lumped constant of FDG in human glioma cells / Noll, Thomas ; M{\"u}hlensiepen, Heinz ; Engels, Ralf ; Hamacher, Kurt ; Papaspyrou, Manfred ; Langen, Karl-Josef ; Bi},
  series = {Journal of Nuclear Medicine. 41 (2000), H. 3},
  journal   = {Journal of Nuclear Medicine. 41 (2000), H. 3},
  isbn      = {0022-3123},
  pages     = {556 -- 564},
  year      = {2000},
  language  = {en}
}
@article{SchoeningArzdorfMulchandanietal.2003,
  author    = {Sch{\"o}ning, Michael Josef and Arzdorf, M. and Mulchandani, P. and Chen, W. and Mulchandani, A.},
  title     = {A capacitive field-effect sensor for the direct determination of organophosphorus pesticides},
  series = {Sensors and Actuators B. 91 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 91 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {92 -- 97},
  year      = {2003},
  language  = {en}
}
@article{SchoeningCrottRonkeletal.1996,
  author    = {Sch{\"o}ning, Michael Josef and Crott, M. and Ronkel, F. and Thust, M. and Schultze, J. W. and Kordos, P. and L{\"u}th, H.},
  title     = {A capacitive chemical sensor based on porous silicon},
  series = {Proceedings of the 26th European Solid State Device Research Conference : Congress Centre, Bologna, Italy, 9 - 11 September 1996 / ESSDERC '96. Ed. by G. Baccarani},
  journal   = {Proceedings of the 26th European Solid State Device Research Conference : Congress Centre, Bologna, Italy, 9 - 11 September 1996 / ESSDERC '96. Ed. by G. Baccarani},
  publisher = {Ed. Fronti{\`e}res},
  address   = {Gif-sur-Yvette},
  isbn      = {2-86332-196-X},
  pages     = {907 -- 910},
  year      = {1996},
  language  = {en}
}
@article{KreyerMuellerEsch2020,
  author    = {Kreyer, J{\"o}rg and M{\"u}ller, Marvin and Esch, Thomas},
  title     = {A Calculation Methodology for Predicting Exhaust Mass Flows and Exhaust Temperature Profiles for Heavy-Duty Vehicles},
  series = {SAE International Journal of Commercial Vehicles},
  volume    = {13},
  journal   = {SAE International Journal of Commercial Vehicles},
  number    = {2},
  publisher = {SAE International},
  address   = {Warrendale, Pa.},
  issn      = {1946-3928},
  doi       = {10.4271/02-13-02-0009},
  pages     = {129 -- 143},
  year      = {2020},
  abstract  = {The predictive control of commercial vehicle energy management systems, such as vehicle thermal management or waste heat recovery (WHR) systems, are discussed on the basis of information sources from the field of environment recognition and in combination with the determination of the vehicle system condition. In this article, a mathematical method for predicting the exhaust gas mass flow and the exhaust gas temperature is presented based on driving data of a heavy-duty vehicle. The prediction refers to the conditions of the exhaust gas at the inlet of the exhaust gas recirculation (EGR) cooler and at the outlet of the exhaust gas aftertreatment system (EAT). The heavy-duty vehicle was operated on the motorway to investigate the characteristic operational profile. In addition to the use of road gradient profile data, an evaluation of the continuously recorded distance signal, which represents the distance between the test vehicle and the road user ahead, is included in the prediction model. Using a Fourier analysis, the trajectory of the vehicle speed is determined for a defined prediction horizon. To verify the method, a holistic simulation model consisting of several hierarchically structured submodels has been developed. A map-based submodel of a combustion engine is used to determine the EGR and EAT exhaust gas mass flows and exhaust gas temperature profiles. All simulation results are validated on the basis of the recorded vehicle and environmental data. Deviations from the predicted values are analyzed and discussed.},
  language  = {en}
}
@article{FerreinMeyer2012,
  author    = {Ferrein, Alexander and Meyer, Thomas},
  title     = {A Brief Overview of Artificial Intelligence in South Africa},
  series = {AI Magazine},
  volume    = {33},
  journal   = {AI Magazine},
  number    = {1},
  publisher = {AAAI},
  address   = {Menlo Park},
  issn      = {0738-4602},
  doi       = {10.1609/aimag.v33i1.2357},
  pages     = {99 -- 101},
  year      = {2012},
  abstract  = {South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.},
  language  = {en}
}
@article{SchoeningSchuetzSchrothetal.1998,
  author    = {Sch{\"o}ning, Michael Josef and Sch{\"u}tz, S. and Schroth, P. and Weißbecker, B. and Steffen, A. and Kordos, P. and Hummel, Hans E.},
  title     = {A BioFET on the basis of intact insect antennae},
  series = {Sensors and Actuators B. 47 (1998), H. 1-3},
  journal   = {Sensors and Actuators B. 47 (1998), H. 1-3},
  isbn      = {0925-4005},
  pages     = {235 -- 238},
  year      = {1998},
  language  = {en}
}
@article{SchoeningSchuetzRiemeretal.1997,
  author    = {Sch{\"o}ning, Michael Josef and Sch{\"u}tz, S. and Riemer, A. and Weißbecker, B. and Steffen, A. and Kordos, P. and L{\"u}th, H. and Hummel, Hans E.},
  title     = {A BioFET on the basis of intact insect antennae},
  series = {Proceedings of the 11th European Conference on Solid-State Transducers / Eurosensors XI, September 21 - 24, 1997, Warsaw, Poland. [Organised by] Warsaw University of Technology. Vol 2.},
  journal   = {Proceedings of the 11th European Conference on Solid-State Transducers / Eurosensors XI, September 21 - 24, 1997, Warsaw, Poland. [Organised by] Warsaw University of Technology. Vol 2.},
  publisher = {Sensor Lab Sp.},
  address   = {Warsaw},
  isbn      = {83-908335-0-6},
  pages     = {1461 -- 1464},
  year      = {1997},
  language  = {en}
}
@article{FerreinRensPoel2009,
  author    = {Ferrein, Alexander and Rens, Gavin and Poel, Etienne van der},
  title     = {A BDI agent architecture for a POMDP planner / Rens, Gavin ; Ferrein, Alexander ; Poel, Etienne van der},
  pages     = {1 -- 6},
  year      = {2009},
  language  = {en}
}
@article{LuftLuftArntz2023,
  author    = {Luft, Angela and Luft, Nils and Arntz, Kristian},
  title     = {A basic description logic for service-oriented architecture in factory planning and operational control in the age of industry 4.0},
  series = {Applied Sciences},
  volume    = {2023},
  journal   = {Applied Sciences},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/app13137610},
  pages     = {Artikel 7610},
  year      = {2023},
  abstract  = {Manufacturing companies across multiple industries face an increasingly dynamic and unpredictable environment. This development can be seen on both the market and supply side. To respond to these challenges, manufacturing companies must implement smart manufacturing systems and become more flexible and agile. The flexibility in operational planning regarding the scheduling and sequencing of customer orders needs to be increased and new structures must be implemented in manufacturing systems' fundamental design as they constitute much of the operational flexibility available. To this end, smart and more flexible solutions for production planning and control (PPC) are developed. However, scheduling or sequencing is often only considered isolated in a predefined stable environment. Moreover, their orientation on the fundamental logic of the existing IT solutions and their applicability in a dynamic environment is limited. This paper presents a conceptual model for a task-based description logic that can be applied to factory planning, technology planning, and operational control. By using service-oriented architectures, the goal is to generate smart manufacturing systems. The logic is designed to allow for easy and automated maintenance. It is compatible with the existing resource and process allocation logic across operational and strategic factory and production planning.},
  language  = {en}
}
@article{OrzadaSolbachGratzetal.2019,
  author    = {Orzada, Stephan and Solbach, Klaus and Gratz, Marcel and Brunheim, Sascha and Fiedler, Thomas M. and Johst, S{\"o}ren and Bitz, Andreas and Shooshtary, Samaneh and Abuelhaija, Asjraf and Voelker, Maximilian N. and Rietsch, Stefan H. G. and Kraff, Oliver and Maderwald, Stefan and Fl{\"o}ser, Martina and Oehmingen, Mark and Quick, Harald H. and Ladd, Mark E.},
  title     = {A 32-channel parallel transmit system add-on for 7T MRI},
  series = {Plos one},
  journal   = {Plos one},
  doi       = {10.1371/journal.pone.0222452},
  year      = {2019},
  language  = {en}
}
@article{Heuermann2008,
  author    = {Heuermann, Holger},
  title     = {A 14 W SPST Switch with Four PIN-Diodes In a 0402-SMD-Package},
  isbn      = {978-3-8007-3086-5},
  pages     = {318 -- 321},
  year      = {2008},
  language  = {en}
}
@article{SchoeningSimonisRugeetal.2002,
  author    = {Sch{\"o}ning, Michael Josef and Simonis, Anette and Ruge, Christian and Ecken, Holger and M{\"u}ller-Veggian, Mattea and L{\"u}th, Hans},
  title     = {A (bio-)chemical Field-effect Sensor with Macroporous Si as Substrate Material and a SiO₂ / LPCVD-Si₃N₄ Double Layer as pH Transducer},
  series = {Sensors. 2 (2002), H. 1},
  journal   = {Sensors. 2 (2002), H. 1},
  isbn      = {1424-8220},
  doi       = {10.3390/s20100011},
  pages     = {11 -- 22},
  year      = {2002},
  abstract  = {Macroporous silicon has been etched from n-type Si, using a vertical etching cell where no rear side contact on the silicon wafer is necessary. The resulting macropores have been characterised by means of Scanning Electron Microscopy (SEM). After etching, SiO₂ was thermally grown on the top of the porous silicon as an insulating layer and Si₃N₄ was deposited by means of Low Pressure Chemical Vapour Deposition (LPCVD) as transducer material to fabricate a capacitive pH sensor. In order to prepare porous biosensors, the enzyme penicillinase has been additionally immobilised inside the porous structure. Electrochemical measurements of the pH sensor and the biosensor with an Electrolyte/Insulator/Semiconductor (EIS) structure have been performed in the Capacitance/Voltage (C/V) and Constant capacitance (ConCap) mode.},
  language  = {en}
}
@article{HacklBuessKammerlohretal.2021,
  author    = {Hackl, Michael and Buess, Eduard and Kammerlohr, Sandra and Nacov, Julia and Staat, Manfred and Leschinger, Tim and M{\"u}ller, Lars P. and Wegmann, Kilian},
  title     = {A "comma sign"-directed subscapularis repair in anterosuperior rotator cuff tears yields biomechanical advantages in a cadaveric model},
  series = {The american journal of sports medicine},
  volume    = {49},
  journal   = {The american journal of sports medicine},
  number    = {12},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211031506},
  pages     = {3212 -- 3217},
  year      = {2021},
  abstract  = {Background: Additional stabilization of the "comma sign" in anterosuperior rotator cuff repair has been proposed to provide biomechanical benefits regarding stability of the repair. Purpose: This in vitro investigation aimed to investigate the influence of a comma sign-directed reconstruction technique for anterosuperior rotator cuff tears on the primary stability of the subscapularis tendon repair. Study Design: Controlled laboratory study. Methods: A total of 18 fresh-frozen cadaveric shoulders were used in this study. Anterosuperior rotator cuff tears (complete full-thickness tear of the supraspinatus and subscapularis tendons) were created, and supraspinatus repair was performed with a standard suture bridge technique. The subscapularis was repaired with either a (1) single-row or (2) comma sign technique. A high-resolution 3D camera system was used to analyze 3-mm and 5-mm gap formation at the subscapularis tendon-bone interface upon incremental cyclic loading. Moreover, the ultimate failure load of the repair was recorded. A Mann-Whitney test was used to assess significant differences between the 2 groups. Results: The comma sign repair withstood significantly more loading cycles than the single-row repair until 3-mm and 5-mm gap formation occurred (P≤ .047). The ultimate failure load did not reveal any significant differences when the 2 techniques were compared (P = .596). Conclusion: The results of this study show that additional stabilization of the comma sign enhanced the primary stability of subscapularis tendon repair in anterosuperior rotator cuff tears. Although this stabilization did not seem to influence the ultimate failure load, it effectively decreased the micromotion at the tendon-bone interface during cyclic loading. Clinical Relevance: The proposed technique for stabilization of the comma sign has shown superior biomechanical properties in comparison with a single-row repair and might thus improve tendon healing. Further clinical research will be necessary to determine its influence on the functional outcome.},
  language  = {en}
}
@article{BrabandYegenPaulssenetal.2005,
  author    = {Braband, Henrik and Yegen, Eda and Paulßen, Elisabeth and Abram, Ulrich},
  title     = {[{ReN(PMe2Ph)3}{ReO3N}]2 - Structural Evidence for the Nitridotrioxorhenate(VII) Anion, [ReO3N]2-},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {631},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {12},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200500240},
  pages     = {2408 -- 2410},
  year      = {2005},
  language  = {en}
}
@article{Wilke2006,
  author    = {Wilke, Thomas},
  title     = {[Tagungsbericht zu:] Bourbon - Habsburg - Oranien 1700 (Marburg, 19. - 21.10.2006).},
  series = {ArtHist.net},
  journal   = {ArtHist.net},
  year      = {2006},
  language  = {de}
}
@article{Wilke2017,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu:] Deutsch, Kristina: Jean Marot. Un graveur d'architecture {\`a} l'{\´e}poque de Louis XIV. (= Ars et Scientia; 12), Berlin; Boston 2015.},
  series = {ArtHist.net},
  journal   = {ArtHist.net},
  year      = {2017},
  language  = {de}
}
@article{Wilke2015,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu: ] Yvonne Prinzessin von Cro{\"y}: Das H{\^o}tel de Galliffet (1784-1792). Pariser Baupraxis undAusstattungskunst am feudalen Privatbau des ausgehenden Ancien R{\´e}gime, Hildesheim: Olms 2014},
  series = {Sehepunkte},
  volume    = {15},
  journal   = {Sehepunkte},
  number    = {9},
  issn      = {1618-6168},
  year      = {2015},
  language  = {de}
}
@article{Wilke2011,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu: ] Simone Meyder: "Mehr k{\"o}niglich als frei". Robert de Cotte und das Bauen in Straßburgnach 1681, M{\"u}nster: Waxmann 2010},
  series = {Sehepunkte},
  volume    = {11},
  journal   = {Sehepunkte},
  number    = {2},
  issn      = {1618-6168},
  year      = {2011},
  language  = {de}
}
@article{Wilke2008,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu: ] Gundula Lang: B{\"u}rgerliche Privatg{\"a}rten in deutschen Landen um 1800. Fallstudien zu Gestalt, Nutzung und Bedeutung im Kontext des gesellschaftlichen Umbruchs, Worms: Wernersche Verlagsgesellschaft 2007},
  series = {Sehepunkte},
  volume    = {8},
  journal   = {Sehepunkte},
  number    = {9},
  issn      = {1618-6168},
  year      = {2008},
  language  = {de}
}
@article{SchulteZurhausen1997,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {[Mehrere Beitr{\"a}ge]},
  series = {Lexikon Informatik und Datenverarbeitung},
  journal   = {Lexikon Informatik und Datenverarbeitung},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-486-22875-7},
  year      = {1997},
  language  = {de}
}
@article{Stippel2007,
  author    = {Stippel, Nicola},
  title     = {[Kapitel 9] : Investitionsrechnung},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {356 -- 374},
  year      = {2007},
  language  = {de}
}
@article{Balzer2007,
  author    = {Balzer, Hermann},
  title     = {[Kapitel 8] : Kosten- und Erl{\"o}srechnung},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {274 -- 355},
  year      = {2007},
  language  = {de}
}
@article{Zimmermann2007,
  author    = {Zimmermann, Doris},
  title     = {[Kapitel 7] : Externes Rechnungswesen},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {208 -- 273},
  year      = {2007},
  language  = {de}
}
@article{Call2007,
  author    = {Call, Guido},
  title     = {[Kapitel 3] : Marketing und Vetrieb},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {34 -- 57},
  year      = {2007},
  language  = {de}
}
@article{MackensteinGrap2007,
  author    = {Mackenstein, Hans and Grap, Rolf},
  title     = {[Kapitel 1] : Einf{\"u}hrung in die Betriebswirtschaftslehre und das Management},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {1 -- 16},
  year      = {2007},
  language  = {de}
}
@article{SchneiderSchneider2007,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {[Kapitel 11] : Unternehmenssteuern / von Bettina und Wilhelm Schneider},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {397 -- 413},
  year      = {2007},
  language  = {de}
}
@article{SchneiderSchneider2007,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {[Kapitel 10] : Finanzierung / von Bettina und Wilhelm Schneider},
  series = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  journal   = {Business-Management f{\"u}r Ingenieure : beurteilen - entscheiden - gestalten / Rolf Grap (Hrsg.). - (REFA-Fachbuchreihe Unternehmensentwicklung)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-41256-9},
  pages     = {375 -- 396},
  year      = {2007},
  language  = {de}
}
@article{Baehr2012,
  author    = {B{\"a}hr, Brigitte},
  title     = {[Gert Hoepner] im Interview zum Thema ; Verpackungspolitik - mehr als H{\"u}lle},
  series = {Packaging journal : Technologie, Logistik, Marketing, Produkte},
  journal   = {Packaging journal : Technologie, Logistik, Marketing, Produkte},
  number    = {5},
  publisher = {Ella Verlag},
  address   = {H{\"u}rth},
  issn      = {1610-0336},
  pages     = {78 -- 80},
  year      = {2012},
  language  = {de}
}
@article{KotliarMogilevskiĭShiloetal.2008,
  author    = {Kotliar, Konstantin and Mogilevskiĭ, A. Ia. and Shilo, A. V. and Panchekha, A. P.},
  title     = {[Chaotic non-linear dynamics of alpha-band of the EEg and organization of the cortical activity of P300 wave] / Mogilevskiĭ, A. Ia. ; Kotliar, K. E. ; Shilo, A. V. ; Panchekha, A. P.},
  series = {Zhurnal vyssheĭ nervnoĭ deiatelnosti imeni I P Pavlova. 58 (2008), H. 5},
  journal   = {Zhurnal vyssheĭ nervnoĭ deiatelnosti imeni I P Pavlova. 58 (2008), H. 5},
  publisher = {-},
  isbn      = {0044-4677},
  pages     = {562 -- 575},
  year      = {2008},
  language  = {en}
}
@article{Baatz1974,
  author    = {Baatz, Udo},
  title     = {82.000 FL/h - Eine neue Dimension in der Abf{\"u}llung von Erfrischungsgetr{\"a}nken},
  series = {Das Erfrischungsgetr{\"a}nk - Mineralwasser-Zeitung},
  volume    = {27},
  journal   = {Das Erfrischungsgetr{\"a}nk - Mineralwasser-Zeitung},
  number    = {14},
  publisher = {Matthaes},
  address   = {Stuttgart},
  isbn      = {0342-2232},
  pages     = {341 -- 345},
  year      = {1974},
  language  = {de}
}
@article{FaganBitzBjoerkmanBurtscheretal.2021,
  author    = {Fagan, Andrew J. and Bitz, Andreas and Bj{\"o}rkman-Burtscher, Isabella M. and Collins, Christopher M. and Kimbrell, Vera and Raaijmakers, Alexander J. E.},
  title     = {7T MR Safety},
  series = {Journal of Magnetic Resonance Imaging (JMRI)},
  volume    = {53},
  journal   = {Journal of Magnetic Resonance Imaging (JMRI)},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.27319},
  pages     = {333 -- 346},
  year      = {2021},
  language  = {en}
}