@article{GeorgStollenwerkReinkensmeieretal.2021,
  author    = {Georg, J{\"o}rg Heiner and Stollenwerk, Dominik and Reinkensmeier, Sebastian and Jungbluth, Christian},
  title     = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 1: Quo vadis, Marktdesign?},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {71},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {1/2},
  publisher = {ETV Energieverlag},
  address   = {Essen},
  isbn      = {0720-6240},
  issn      = {0013-743X},
  pages     = {64 -- 69},
  year      = {2021},
  language  = {de}
}
@article{StollenwerkReinkensmeierGeorgetal.2021,
  author    = {Stollenwerk, Dominik and Reinkensmeier, Sebastian and Georg, J{\"o}rg Heiner and Jungbluth, Christian},
  title     = {„Smartes" Laden an {\"o}ffentlich zug{\"a}nglichen Lades{\"a}ulen - Teil 2: USER-Verhalten und -Erwartungen},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {71},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {3},
  publisher = {ETV Energieverlag},
  address   = {Essen},
  isbn      = {0720-6240},
  issn      = {0013-743X},
  pages     = {38 -- 42},
  year      = {2021},
  language  = {de}
}
@article{DellmannGloriusLitvinovetal.2023,
  author    = {Dellmann, Sophia Florence and Glorius, J. and Litvinov, Yu A. and Reifarth, R. and Al-Khasawneh, Kafa and Aliotta, M. and Bott, L. and Br{\"u}ckner, Benjamin and Bruno, C. G. and Chen, Ruijiu and Davinson, T. and Dickel, T. and Dillmann, Iris and Dmytriev, D. and Erbacher, P. and Freire-Fern{\´a}ndez, D. and Forstner, Oliver and Geissel, H. and G{\"o}bel, K. and Griffin, Christopher J. and Grisenti, R. and Gumberidze, Alexandre and Haettner, Emma and Hagmann, Siegbert and Heil, M. and Heß, R. and Hillenbrand, P.-M. and Joseph, R. and Jurado, B. and Kozhuharov, Christophor and Kulikov, I. and L{\"o}her, Bastian and Langer, Christoph and Leckenby, Guy and Lederer-Woods, C. and Lestinsky, M. and Litvinov, S. A. and Lorenz, B. A. and Lorenz, E. and Marsh, J. and Menz, Esther Babette and Morgenroth, T. and Petridis, N. and Pibernat, Jerome and Popp, U. and Psaltis, Athanasios and Sanjari, Shahab and Scheidenberger, C. and Sguazzin, M. and Sidhu, Ragandeep Singh and Spillmann, Uwe and Steck, M. and St{\"o}hlker, T. and Surzhykov, A. and Swartz, J. A. and T{\"o}rnqvist, H. and Varga, L. and Vescovi, Diego and Weick, H. and Weigand, M. and Woods, P. and Xing, Y. and Yamaguchi, Taiyo},
  title     = {Proton capture on stored radioactive ¹¹⁸Te ions},
  series = {EPJ Web of Conferences},
  volume    = {279},
  journal   = {EPJ Web of Conferences},
  number    = {Article Number: 11018},
  publisher = {EDP Sciences},
  issn      = {2100-014X},
  doi       = {10.1051/epjconf/202327911018},
  pages     = {1 -- 5},
  year      = {2023},
  abstract  = {Experimental determination of the cross sections of proton capture on radioactive nuclei is extremely difficult. Therefore, it is of substantial interest for the understanding of the production of the p-nuclei. For the first time, a direct measurement of proton-capture cross sections on stored, radioactive ions became possible in an energy range of interest for nuclear astrophysics. The experiment was performed at the Experimental Storage Ring (ESR) at GSI by making use of a sensitive method to measure (p,γ) and (p,n) reactions in inverse kinematics. These reaction channels are of high relevance for the nucleosyn-thesis processes in supernovae, which are among the most violent explosions in the universe and are not yet well understood. The cross section of the ¹¹⁸Te(p,γ) reaction has been measured at energies of 6 MeV/u and 7 MeV/u. The heavy ions interacted with a hydrogen gas jet target. The radiative recombination process of the fully stripped ¹¹⁸Te ions and electrons from the hydrogen target was used as a luminosity monitor. An overview of the experimental method and preliminary results from the ongoing analysis will be presented.},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2017,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Advances in solar tower technology},
  series = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  volume    = {6},
  journal   = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  number    = {1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2041-840X},
  doi       = {10.1002/wene.217},
  pages     = {1 -- 19},
  year      = {2017},
  language  = {en}
}
@article{IlleSchrammAdametal.2008,
  author    = {Ille, F. and Schramm, S. and Adam, M. and Backes, K. and Faber, Christian and Anthrakidis, Anette},
  title     = {Kraft-W{\"a}rme-K{\"a}lte-Kopplung im Leistungsbereich von 10 kW mit periodisch arbeitender Sorptionsmaschine},
  series = {VDI-Tage der Geb{\"a}udetechnik 2008 : Tagung Dortmund, 28. und 29. Mai 2008 / VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung},
  journal   = {VDI-Tage der Geb{\"a}udetechnik 2008 : Tagung Dortmund, 28. und 29. Mai 2008 / VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092043-6},
  pages     = {103 -- 116},
  year      = {2008},
  language  = {de}
}
@article{AlexopoulosBreitbachHoffschmidtetal.2008,
  author    = {Alexopoulos, Spiros and Breitbach, Gerd and Hoffschmidt, Bernhard and Stobbe, P.},
  title     = {Computational fluid flow of porous resic ceramic filtering modules and optimization of the channel edge form geometry},
  series = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2},
  journal   = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2},
  publisher = {Filtech Exhibitions},
  address   = {Meerbusch},
  pages     = {300 -- 304},
  year      = {2008},
  language  = {en}
}
@article{VerschitzButenweg2014,
  author    = {Verschitz, Daniel and Butenweg, Christoph},
  title     = {Standsicherheitsnachweis von Beh{\"a}ltern f{\"u}r Kleinkl{\"a}ranlagen},
  series = {ACWA aktuell},
  journal   = {ACWA aktuell},
  number    = {12 - 9/2014},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  pages     = {10},
  year      = {2014},
  abstract  = {Die PIA GmbH pr{\"u}ft seit fast 8 Jahren die Standsicherheit von Beh{\"a}ltern f{\"u}r Kleinkl{\"a}ranlagen. Diese bestehen in der Regel aus Kunststoff oder Beton und m{\"u}ssen {\"u}ber ihre gesamte Lebensdauer den Beanspruchungen aus Handhabung, Einbau und Betrieb standhalten. Die Standsicherheit kann nach EN 12566 wahlweise durch einen rechnerischen Nachweis oder durch einen praktischen Nachweis wie die Bruchlastpr{\"u}fung oder die Pr{\"u}fung in der Grube erfolgen.},
  language  = {de}
}
@article{MykoniouButenwegHoltschoppenetal.2016,
  author    = {Mykoniou, Konstantin and Butenweg, Christoph and Holtschoppen, Britta and Klinkel, Sven},
  title     = {Seismic response analysis of adjacent liquid-storage tanks},
  series = {Earthquake engineering and structural dynamics},
  volume    = {45},
  journal   = {Earthquake engineering and structural dynamics},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1096-9845 (E-Journal); 0098-8847 (Print)},
  doi       = {10.1002/eqe.2726},
  pages     = {1779 -- 1796},
  year      = {2016},
  abstract  = {A refined substructure technique in the frequency domain is developed, which permits consideration of the interaction effects among adjacent containers through the supporting deformable soil medium. The tank-liquid systems are represented by means of mechanical models, whereas discrete springs and dashpots stand for the soil beneath the foundations. The proposed model is employed to assess the responses of adjacent circular, cylindrical tanks for harmonic and seismic excitations over wide range of tank proportions and soil conditions. The influence of the number, spatial arrangement of the containers and their distance on the overall system's behavior is addressed. The results indicate that the cross-interaction effects can substantially alter the impulsive components of response of each individual element in a tank farm. The degree of this impact is primarily controlled by the tank proportions and the proximity of the predominant natural frequencies of the shell-liquid-soil systems and the input seismic motion. The group effects should be not a priori disregarded, unless the tanks are founded on shallow soil deposit overlying very stiff material or bedrock.},
  language  = {en}
}
@article{TaddeiButenwegKlinkel2015,
  author    = {Taddei, Francesca and Butenweg, Christoph and Klinkel, S.},
  title     = {Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil},
  series = {Wind energy : an international journal for progress and applications in wind power conversion technology},
  volume    = {Volume 18},
  journal   = {Wind energy : an international journal for progress and applications in wind power conversion technology},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1099-1824 (E-Journal); 1095-4244 (Print)},
  doi       = {10.1002/we.1703},
  pages     = {399 -- 417},
  year      = {2015},
  language  = {en}
}
@article{AltayButenwegTaddei2013,
  author    = {Altay, Okyay and Butenweg, Christoph and Taddei, Francesca},
  title     = {Effektivit{\"a}t von Schwingungsd{\"a}mpfern bei Windenergieanlagen},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 88},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {Heft 10},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S11 -- S17},
  year      = {2013},
  language  = {de}
}
@article{ButenwegKleemannIkier2013,
  author    = {Butenweg, Christoph and Kleemann, Anne and Ikier, Axel},
  title     = {Impact-Belastungen von Stahlbetonkonstruktionen},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 88},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  publisher = {VDI Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {S7 -- S14},
  year      = {2013},
  language  = {de}
}
@article{KubalskiButenweg2015,
  author    = {Kubalski, Thomas and Butenweg, Christoph},
  title     = {Modelling strategies for horizontally loaded infill masonry},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 19},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 5},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/dama.201500675},
  pages     = {363 -- 369},
  year      = {2015},
  language  = {de}
}
@article{ButenwegGellert2013,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Nichtlinearer Nachweis von Mauerwerksbauten},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 17},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201300575},
  pages     = {166 -- 171},
  year      = {2013},
  language  = {de}
}
@article{MeskourisButenwegRenault2006,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Renault, Philippe},
  title     = {Beurteilung der Erdbebensicherheit von bestehenden Bauwerken},
  series = {Der Pr{\"u}fingenieur : das Magazin der Bundesvereinigung der Pr{\"u}fingenieure f{\"u}r Bautechnik},
  journal   = {Der Pr{\"u}fingenieur : das Magazin der Bundesvereinigung der Pr{\"u}fingenieure f{\"u}r Bautechnik},
  number    = {Ausgabe 28},
  issn      = {1430-9084},
  pages     = {56 -- 65},
  year      = {2006},
  language  = {de}
}
@article{HollerButenwegNohetal.2004,
  author    = {Holler, S. and Butenweg, Christoph and Noh, S.-Y. and Meskouris, Konstantin},
  title     = {Computational model of textile-reinforced concrete structures},
  series = {Computers \& structures : an international journal},
  volume    = {Volume 82},
  journal   = {Computers \& structures : an international journal},
  number    = {Issues 23-26},
  issn      = {1879-2243 (E-Journal); 0045-7949 (Print)},
  doi       = {10.1016/j.compstruc.2004.03.076},
  pages     = {1971 -- 1979},
  year      = {2004},
  language  = {en}
}
@article{RenaultButenwegMeskouris2005,
  author    = {Renault, Philippe and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Beurteilung der Erdbebensicherheit von bestehenden Br{\"u}ckenbauwerken am Beispiel der Rheinbr{\"u}cke Emmerich},
  series = {Beton- und Stahlbetonbau},
  volume    = {Volume 100},
  journal   = {Beton- und Stahlbetonbau},
  number    = {Issue 7},
  issn      = {1437-1006 (E-Journal); 0005-9900 (Print)},
  doi       = {10.1002/best.200590145},
  pages     = {574 -- 581},
  year      = {2005},
  language  = {de}
}
@article{MistlerButenweg2005,
  author    = {Mistler, Michael and Butenweg, Christoph},
  title     = {Verformungsbasierter seismischer Nachweis von Mauerwerksbauten mit der Kapazit{\"a}tsspektrum-Methode},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 9},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 6},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.200590098},
  pages     = {255 -- 261},
  year      = {2005},
  language  = {de}
}
@article{MistlerButenwegMeskouris2006,
  author    = {Mistler, Michael and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Modelling methods of historic masonry buildings under seismic excitation},
  series = {Journal of seismology},
  volume    = {Volume 10},
  journal   = {Journal of seismology},
  number    = {No. 4},
  issn      = {1383-4649 (Print) ; 1573-157X (E-Journal)},
  doi       = {10.1007/s10950-006-9033-z},
  pages     = {497 -- 510},
  year      = {2006},
  language  = {en}
}
@article{MistlerAnthoineButenweg2007,
  author    = {Mistler, Michael and Anthoine, A. and Butenweg, Christoph},
  title     = {In-plane and out-of-plane homogenisation of masonry},
  series = {Computers \& structures},
  volume    = {Volume 85},
  journal   = {Computers \& structures},
  number    = {Issues 17-18},
  issn      = {1879-2243 (E-Journal); 0045-7949 (Print)},
  doi       = {10.1016/j.compstruc.2006.08.087},
  pages     = {1321 -- 1330},
  year      = {2007},
  language  = {en}
}
@article{ButenwegEbenauKarvaneketal.2003,
  author    = {Butenweg, Christoph and Ebenau, C. and Karvanek, E. and Thierauf, G.},
  title     = {Bautechnische Pr{\"u}fung und Bau{\"u}berwachung der Arena 'Auf Schalke'},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {Bd. 78},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  number    = {Nr. 5},
  issn      = {0005-6650},
  pages     = {215 -- 220},
  year      = {2003},
  language  = {de}
}
@article{ChudobaKuhlmannButenweg2001,
  author    = {Chudoba, Rostislav and Kuhlmann, Wolfram and Butenweg, Christoph},
  title     = {Ein technisches Informationssystem zur Entwicklung von Textilbeton},
  series = {Bauinformatik-Journal : bi-Journal; Zeitschrift f{\"u}r Architekten und Ingenieure},
  volume    = {Bd. 4},
  journal   = {Bauinformatik-Journal : bi-Journal; Zeitschrift f{\"u}r Architekten und Ingenieure},
  number    = {H. 6},
  issn      = {1436-9060},
  pages     = {15 -- 20},
  year      = {2001},
  language  = {de}
}
@article{ButenwegMarinkovićFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Fehling, Ekkehard and Pfetzing, Thomas},
  title     = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  isbn      = {0005-6650},
  pages     = {2 -- 10},
  year      = {2018},
  language  = {de}
}
@article{Butenweg2017,
  author    = {Butenweg, Christoph},
  title     = {Die neue Erdbebenfibel. Neue Hilfsmittel f{\"u}r die Leichtbetonindustrie},
  series = {Tagungsband 61. Ulmer Beton Tage 2017},
  journal   = {Tagungsband 61. Ulmer Beton Tage 2017},
  year      = {2017},
  language  = {de}
}
@article{RossiParisiCasarietal.2019,
  author    = {Rossi, Leonardo and Parisi, Davide and Casari, Chiara and Montanari, Luca and Ruggieri, Gabriella and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings},
  series = {Earthquake Spectra},
  volume    = {35},
  journal   = {Earthquake Spectra},
  number    = {4},
  issn      = {1944-8201},
  doi       = {10.1193/100118EQS224DP},
  pages     = {1979 -- 2001},
  year      = {2019},
  language  = {en}
}
@article{ButenwegSchmittRosen2014,
  author    = {Butenweg, Christoph and Schmitt, T. and Rosen, B.},
  title     = {Seismische Einwirkungen auf erdverlegte Rohrleitungen},
  series = {Bauingenieur},
  volume    = {89},
  journal   = {Bauingenieur},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {316 -- 324},
  year      = {2014},
  abstract  = {Die erdbebensichere Auslegung von erdverlegten Rohrleitungssystemen ist von wesentlicher Bedeutung zur Sicherstellung der Funktionalit{\"a}t der Versorgungsinfrastruktur nach einem Erdbebenereignis. Zur Vermeidung von Netzausf{\"a}llen ist es erforderlich, die r{\"a}umlich weit ausgedehnten Leitungssysteme mit geeigneten rechnerischen Modellen seismisch zu bemessen. Der vorliegende Beitrag behandelt die Beanspruchung von Rohrleitungssystemen durch seismische Welleneinwirkung und stellt geeignete N{\"a}herungsans{\"a}tze und ein detailliertes Rechenmodell f{\"u}r seismische Leitungsanalysen vor. Mit den Ans{\"a}tzen wird in Berechnungsbeispielen der Einfluss wesentlicher Parameter auf die seismisch induzierten Dehnungen in Rohrleitungssystemen untersucht.},
  language  = {de}
}
@article{RossiHoltschoppenButenweg2019,
  author    = {Rossi, Leonardo and Holtschoppen, Britta and Butenweg, Christoph},
  title     = {Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007\%2Fs10518-019-00655-8},
  pages     = {4855 -- 4884},
  year      = {2019},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2010,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Solarthermische Kraftwerke mit thermischen Speichern},
  series = {Chemie Ingenieur Technik. 82 (2010), H. 9},
  journal   = {Chemie Ingenieur Technik. 82 (2010), H. 9},
  isbn      = {1522-2640},
  pages     = {1606 -- 1606},
  year      = {2010},
  language  = {de}
}
@article{HoltschoppenButenwegMeskouris2009,
  author    = {Holtschoppen, B. and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Erdbebensichere Auslegung von Industrieanlagen},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  number    = {M{\"a}rz},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {S9 -- S14},
  year      = {2009},
  language  = {de}
}
@article{Butenweg2010,
  author    = {Butenweg, Christoph},
  title     = {Bewertung der Erdbebensicherheit von bestehenden Bauwerken},
  series = {{\"O}sterreichische Ingenieur- und Architekten-Zeitschrift : {\"O}IAZ ; Zeitschr. d. {\"O}IAV / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  volume    = {155},
  journal   = {{\"O}sterreichische Ingenieur- und Architekten-Zeitschrift : {\"O}IAZ ; Zeitschr. d. {\"O}IAV / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  number    = {1-3 und 4-6},
  publisher = {{\"O}AIV},
  address   = {Wien},
  issn      = {0721-9415},
  pages     = {11 -- 17},
  year      = {2010},
  language  = {de}
}
@article{ButenwegGellertSchlundt2010,
  author    = {Butenweg, Christoph and Gellert, Christoph and Schlundt, Andreas},
  title     = {Nichtlinearer Erdbebennachweis von Geb{\"a}uden aus Kalksandsteinmauerwerk nach DIN EN 1998},
  series = {Mauerwerk : European journal of masonry},
  volume    = {14},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1432-3427},
  doi       = {10.1002/dama.201000463},
  pages     = {120 -- 125},
  year      = {2010},
  abstract  = {Die Erdbebensicherheit von Geb{\"a}uden aus Kalksandsteinmauerwerk ist aktuell nach DIN 4149 mit linearen Verfahren nachzuweisen. Dies f{\"u}hrt in der praktischen Anwendung zu großen Problemen, da selbst traditionell {\"u}bliche Grundrisse teilweise nicht mehr ohne zus{\"a}tzliche Maßnahmen nachweisbar sind. Zur L{\"o}sung dieser Problematik wurden von der deutschen Mauerwerksindustrie auf nationaler und europ{\"a}ischer Ebene Forschungsprojekte initiiert, deren Ergebnisse in Form von statisch nichtlinearen Verfahren Eingang in den Nationalen Anhang zur DIN EN 1998-1 [12] gefunden haben. Mit den Verfahren wird die Nachweissituation zuk{\"u}nftig grundlegend verbessert, da mit diesen die Tragwerksreserven wesentlich besser ausgenutzt werden k{\"o}nnen. Im Folgenden wird die Anwendung der Verfahren am Beispiel einer Reihenhauszeile aus Kalksandsteinmauerwerk demonstriert. Der Nachweis der Reihenh{\"a}user wurde im Rahmen einer Zustimmung im Einzelfall, die vom Bundesverband Kalksandsteinindustrie eV in Hannover koordiniert wurde, durch unabh{\"a}ngige Gutachter und die Bauaufsicht eingehend gepr{\"u}ft und f{\"u}r richtig befunden. Die Durchf{\"u}hrung des Nachweises erfolgte auf Grundlage eines an der RWTH Aachen entwickelten neuen Nachweiskonzeptes. Die baupraktische Anwendbarkeit und einfache Nachvollziehbarkeit dieses Konzepts ist durch eine softwaretechnische Umsetzung sichergestellt.},
  language  = {de}
}
@article{ButenwegFaeckeFehlingetal.2010,
  author    = {Butenweg, Christoph and F{\"a}cke, Andreas and Fehling, Ekkehard and Gellert, Christoph and Gierga, Michael and Meyer, Udo and R{\"u}tschlin, Andreas H. and St{\"u}rz, Jochen},
  title     = {Energieeffizient und erdbebensicher Bauen mit monolithischem Ziegelmauerwerk},
  series = {Mauerwerk : European journal of masonry},
  volume    = {14},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {1},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1432-3427},
  doi       = {10.1002/dama.201000456},
  pages     = {3 -- 9},
  year      = {2010},
  abstract  = {Moderne Bauwerke m{\"u}ssen heute eine hohe energetische Leistungsf{\"a}higkeit aufweisen und gleichzeitig alle einwirkenden Lasten sicher abtragen. Dies stellt insbesondere in Erdbebengebieten hohe Anforderungen an die verwendeten Baustoffe. Am baupraktischen Beispiel einer Doppelhaush{\"a}lfte wird demonstriert, dass die Symbiose aus energieeffizientem und gleichzeitig erdbebensicherem Bauen in der h{\"o}chsten deutschen Erdbebenzone mit monolithischem Ziegelmauerwerk gut realisierbar ist. Als Ziegelmauerwerk werden f{\"u}r die Außenw{\"a}nde w{\"a}rmetechnisch optimierte Hochlochziegel verwendet, die sowohl die Anforderungen der Energieeinsparverordnung 2009 als auch die Anforderungen an Mauerwerkbaustoffe nach den aktuellen Erdbebennormen erf{\"u}llen. Der Erdbebennachweis der Doppelhaush{\"a}lfte erfolgt mit einem nichtlinearen Nachweisverfahren, das f{\"u}r eine einfache praktische Anwendung programmtechnisch umgesetzt wurde. F{\"u}r den Nachweis wurden aus zyklischen Schubwandversuchen ermittelte Last-Verformungskurven verwendet. Das gesamte in Deutschland noch nicht normativ geregelte Nachweiskonzept wurde im Rahmen einer Zustimmung im Einzelfall gepr{\"u}ft und genehmigt.},
  language  = {de}
}
@article{ButenwegFehling2012,
  author    = {Butenweg, Christoph and Fehling, Ekkehard},
  title     = {Hintergrund f{\"u}r die vereinfachten Regeln bei Mauerwerksgeb{\"a}uden im Erdbebenfall},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200537},
  pages     = {127 -- 137},
  year      = {2012},
  abstract  = {Bei der Ausarbeitung des nationalen Anwendungsdokumentes zur DIN EN 1998-1 waren die in der ENV-Fassung enthaltenen vereinfachten Regeln im Lichte aktueller Forschungsergebnisse zu {\"u}berpr{\"u}fen und zu {\"u}berarbeiten. Die gleiche Aufgabe stellte sich auch f{\"u}r die Neufassung der DIN 4149. In beiden F{\"a}llen sind neben konstruktiven Regeln f{\"u}r die Art und Anordnung der zur Geb{\"a}udeaussteifung heranzuziehenden W{\"a}nde im Grundriss Tabellen enthalten, die unter bestimmten Bedingungen den Entfall eines rechnerischen Nachweises der Tragw{\"a}nde im Erdbebenfall erm{\"o}glichen. Dies ist f{\"u}r Schwachbebengebiete, wie sie in Deutschland und anderen L{\"a}ndern Mitteleuropas anzutreffen sind, sinnvoll, um unn{\"o}tigen Rechenaufwand sowie Probleme mit der F{\"u}hrbarkeit von Nachweisen so weit wie m{\"o}glich auszuschalten. Im vorliegenden Beitrag werden die Hintergr{\"u}nde der vereinfachten Regeln diskutiert und die Ergebnisse der Anwendung mit verschiedenen Rechenverfahren verglichen und bewertet.},
  language  = {de}
}
@article{ButenwegGellert2012,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Integrale Geb{\"a}udeplanung am Beispiel eines Geschossbaus in Ziegelmauerwerk},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 16},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.201200550},
  pages     = {247 -- 254},
  year      = {2012},
  abstract  = {Moderne Mauerwerksbauten m{\"u}ssen nach heutigen Anforderungen architektonisch, statisch, energetisch sowie schall- und brandschutztechnisch optimal ausgelegt sein. Aufgrund der Komplexit{\"a}t und engen Verzahnung der einzelnen Anforderungen ist eine integrale Geb{\"a}udeplanung zur Erzielung einer qualitativ hochwertigen Bauwerksl{\"o}sung unbedingt notwendig. Diese erfordert von den Fachplanern vertieftes Spezialwissen in den verschiedenen Bereichen, um insbesondere die Schnittstellen und Bauwerksdetails korrekt zu planen und auszuf{\"u}hren. Der Beitrag stellt die integrale Geb{\"a}udeplanung am Beispiel eines Geschossbaus in Ziegelbauweise mit L{\"o}sungen f{\"u}r wesentliche Detailpunkte vor},
  language  = {de}
}
@article{EdipGarevskiButenwegetal.2013,
  author    = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sesov, Vlatko and Cvetanovska, Julijana and Gjorgiev, Igor},
  title     = {Numerical simulation of geotechnical problems by coupled finite and infinite elements},
  series = {Journal of civil engineering and architecture},
  volume    = {7},
  journal   = {Journal of civil engineering and architecture},
  number    = {1},
  publisher = {David Publishing},
  address   = {Libertyville},
  issn      = {1934-7359 (E-Journal)},
  pages     = {68 -- 77},
  year      = {2013},
  language  = {en}
}
@article{MeskourisButenwegGellert2009,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Gellert, Christoph},
  title     = {Einfache Nachweise : einige Beispiele f{\"u}r die Anwendung des Bemessungsprogramms der RWTH Aachen f{\"u}r den Nachweis von Mauerwerksbauten in Erdbebengebieten},
  series = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  journal   = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  number    = {Heft 6},
  publisher = {Rauh Medien GmbH},
  address   = {Wandlitz},
  issn      = {0946-2422},
  pages     = {26 -- 29},
  year      = {2009},
  language  = {de}
}
@article{NordaButenweg2011,
  author    = {Norda, Hannah and Butenweg, Christoph},
  title     = {M{\"o}glichkeiten und Grenzen der Anwendbarkeit statisch nichtlinearer Verfahren nach DIN EN 1998-1},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 86},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S13 -- S21},
  year      = {2011},
  language  = {de}
}
@article{ButenwegHoltschoppen2012,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Neuer VCI-Leitfaden f{\"u}r die erdbebensichere Auslegung von Industrieanlagen},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {Band 87},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S18},
  year      = {2012},
  language  = {de}
}
@article{MeskourisButenwegGellert2009,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Gellert, Christoph},
  title     = {Iterativ verbessert : die RWTH Aachen entwickelt eine Software f{\"u}r einfache Nachweise von Mauerwerksbauten in Erdbebengebieten},
  series = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  journal   = {Deutsches Ingenieur-Blatt : Ingenieurwesen, Bautechnik, Umweltschutz ; Organ der deutschen Ingenieurkammern / Hrsg.: Bundes-Ingenieurkammer e.V.},
  number    = {Heft 5},
  publisher = {Rauh Medien GmbH},
  address   = {Wandlitz},
  issn      = {2365-192X},
  pages     = {31 -- 36},
  year      = {2009},
  language  = {de}
}
@article{ButenwegGellertKranzler2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Kranzler, Thomas},
  title     = {Pseudo-dynamische Versuche an Reihenmittelh{\"a}usern - Vergleich mit aktuellen Berechnungsans{\"a}tzen},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 12},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 6},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.200800397},
  pages     = {315 -- 326},
  year      = {2008},
  language  = {de}
}
@article{GoemmelButenwegBolenderetal.2007,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Bolender, Katrin and Grunendahl, Arno},
  title     = {A muscle controlled finite-element model of laryngeal abduction and adduction},
  series = {Computer methods in biomechanics and biomedical engineering},
  volume    = {Volume 10},
  journal   = {Computer methods in biomechanics and biomedical engineering},
  number    = {Issue 5},
  issn      = {1476-8259 (E-Journal); 1025-5842 (Print)},
  pages     = {377 -- 388},
  year      = {2007},
  language  = {en}
}
@article{RochefortVerverGrunendahletal.2005,
  author    = {Rochefort, E. de and Verver, M. and Grunendahl, A. and Mooi, H. and Butenweg, Christoph},
  title     = {Detailed modelling of the lumbar spine for investigations of low back pain},
  series = {SAE transactions : papers presented at Society and Section meetings / Society of Automotive Engineers},
  volume    = {Volume 114},
  journal   = {SAE transactions : papers presented at Society and Section meetings / Society of Automotive Engineers},
  number    = {Part 7},
  organization    = {Society of Automotive Engineers},
  issn      = {0096-736X},
  pages     = {788 -- 796},
  year      = {2005},
  language  = {en}
}
@article{KuhlmannButenwegBettzieche2006,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker},
  title     = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren},
  series = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  volume    = {Band 96},
  journal   = {Wasserwirtschaft : Hydrologie, Wasserbau, Hydromechanik, Gew{\"a}sser, {\"O}kologie, Boden},
  number    = {Heft 5},
  issn      = {0043-0978 (E-Journal); 0043-0978 (Print)},
  pages     = {10 -- 16},
  year      = {2006},
  language  = {de}
}
@article{ButenwegGellertMeskouris2007,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meskouris, Konstantin},
  title     = {Mauerwerksw{\"a}nde unter zyklischer Schubbeanspruchung},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 11},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 6},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.200700356},
  pages     = {356 -- 362},
  year      = {2007},
  language  = {de}
}
@article{MeskourisButenwegRenault2006,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Renault, Philippe},
  title     = {Mehrstufen-Konzept f{\"u}r mehr Erdbebensicherheit : ein Werkzeug f{\"u}r die Beurteilung der Erdbebengef{\"a}hrdung von Ingenieurbauwerken},
  series = {Deutsches Ingenieurblatt},
  volume    = {Band 13},
  journal   = {Deutsches Ingenieurblatt},
  number    = {Heft 6},
  issn      = {0946-2422},
  pages     = {18 -- 26},
  year      = {2006},
  language  = {de}
}
@article{HoltschoppenButenwegMeskouris2009,
  author    = {Holtschoppen, Britta and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Seismic design of non-structural components in industrial facilities},
  series = {International journal of engineering under uncertainty},
  volume    = {Volume 1},
  journal   = {International journal of engineering under uncertainty},
  issn      = {0975-4806},
  pages     = {1 -- 13},
  year      = {2009},
  language  = {en}
}
@article{RossiStupazziniParisietal.2019,
  author    = {Rossi, Leonardo and Stupazzini, Marco and Parisi, Davide and Holtschoppen, Britta and Ruggieri, Gabriella and Butenweg, Christoph},
  title     = {Empirical fragility functions and loss curves for long-span-beam buildings based on the 2012 Emilia-Romagna earthquake official database},
  series = {Bulletin of Earthquake Engineering},
  volume    = {18},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer Nature},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00759-1},
  pages     = {1693 -- 1721},
  year      = {2019},
  abstract  = {The 2012 Emilia-Romagna earthquake, that mainly struck the homonymous Italian region provoking 28 casualties and damage to thousands of structures and infrastructures, is an exceptional source of information to question, investigate, and challenge the validity of seismic fragility functions and loss curves from an empirical standpoint. Among the most recent seismic events taking place in Europe, that of Emilia-Romagna is quite likely one of the best documented, not only in terms of experienced damages, but also for what concerns occurred losses and necessary reconstruction costs. In fact, in order to manage the compensations in a fair way both to citizens and business owners, soon after the seismic sequence, the regional administrative authority started (1) collecting damage and consequence-related data, (2) evaluating information sources and (3) taking care of the cross-checking of various reports. A specific database—so-called Sistema Informativo Gestione Europa (SFINGE)—was devoted to damaged business activities. As a result, 7 years after the seismic events, scientists can rely on a one-of-a-kind, vast and consistent database, containing information about (among other things): (1) buildings' location and dimensions, (2) occurred structural damages, (3) experienced direct economic losses and (4) related reconstruction costs. The present work is focused on a specific data subset of SFINGE, whose elements are Long-Span-Beam buildings (mostly precast) deployed for business activities in industry, trade or agriculture. With the available set of data, empirical fragility functions, cost and loss ratio curves are elaborated, that may be included within existing Performance Based Earthquake Engineering assessment toolkits.},
  language  = {en}
}
@article{ButenwegMarinkovicKubalskietal.2016,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Kubalski, Thomas and Klinkel, Sven},
  title     = {Masonry infilled reinforced concrete frames under horizontal loading},
  series = {Mauerwerk},
  volume    = {20},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022},
  doi       = {10.1002/dama.201600703},
  pages     = {305 -- 312},
  year      = {2016},
  abstract  = {The behaviour of infilled reinforced concrete frames under horizontal load has been widely investigated, both experimentally and numerically. Since experimental tests represent large investments, numerical simulations offer an efficient approach for a more comprehensive analysis. When RC frames with masonry infill walls are subjected to horizontal loading, their behaviour is highly non-linear after a certain limit, which makes their analysis quite difficult. The non-linear behaviour results from the complex inelastic material properties of the concrete, infill wall and conditions at the wall-frame interface. In order to investigate this non-linear behaviour in detail, a finite element model using a micro modelling approach is developed, which is able to predict the complex non-linear behaviour resulting from the different materials and their interaction. Concrete and bricks are represented by a non-linear material model, while each reinforcement bar is represented as an individual part installed in the concrete part and behaving elasto-plastically. Each brick is modelled individually and connected taking into account the non-linearity of a brick mortar interface. The same approach is followed using two finite element software packages and the results are compared with the experimental results. The numerical models show a good agreement with the experiments in predicting the overall behaviour, but also very good matching for strength capacity and drift. The results emphasize the quality and the valuable contribution of the numerical models for use in parametric studies, which are needed for the derivation of design recommendations for infilled frame structures.},
  language  = {en}
}
@article{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Erdbebensicherer Anschluss von Ausfachungsmauerwerk in Stahlbetonrahmentragwerken mit Entkopplungselementen},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  number    = {9},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  pages     = {333 -- 341},
  year      = {2018},
  abstract  = {Stahlbetonrahmentragwerke mit Mauerwerksausfachungen weisen nach Erdbebenereignissen h{\"a}ufig schwere Sch{\"a}den auf, da die Ausfachungen ohne weitere konstruktive Maßnahmen mit vollem Kontakt zum Stahlbetonrahmen eingemauert werden. Durch die unplanm{\"a}ßige Beteiligung am horizontalen Lastabtrag erfahren die Ausfachungen Belastungen in Wandebene und beeinflussen das globale Schwingungsverhalten der Rahmentragwerke. In Kombination mit den gleichzeitig auftretenden seismischen Tr{\"a}gheitskr{\"a}ften senkrecht zur Wand f{\"u}hrt dies in vielen F{\"a}llen zu einem Versagen der mit niedrigen Festigkeiten ausgef{\"u}hrten Ausfachungen. Dies war der Anlass in dem europ{\"a}ischen Forschungsprojekt INSYSME ein Entkopplungssystem zu entwickeln, mit dem Rahmen und Ausfachung durch ein spezielles Profil aus Elastomeren entkoppelt werden. Das Profil erm{\"o}glicht Relativverschiebungen zwischen Rahmen und Ausfachung und stellt gleichzeitig die Aufnahme von Belastungen senkrecht zur Wand sicher. Der Beitrag erl{\"a}utert zun{\"a}chst den Aufbau des Systems und gibt einen {\"U}berblick {\"u}ber die in Kleinbauteilversuchen ermittelten Tragf{\"a}higkeiten. Zudem werden experimentelle Untersuchungen an mit hochw{\"a}rmed{\"a}mmenden Mauerziegeln ausgefachten Stahlbetonrahmen mit und ohne Entkopplungssystem f{\"u}r getrennte und kombinierte Belastungen in und senkrecht zur Wandebene vorgestellt. Auf Grundlage einer Versuchsauswertung und eines Ergebnisvergleichs werden Wirkungsweise und Effektivit{\"a}t des entwickelten Entkopplungssystems demonstriert.},
  language  = {de}
}
@article{MichelButenwegKinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Kinkel, Sven},
  title     = {Pile-grid foundations of onshore wind turbines considering soil-structure-interaction under seismic loading},
  series = {Soil Dynamics and Earthquake Engineering},
  volume    = {109},
  journal   = {Soil Dynamics and Earthquake Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0267-7261},
  doi       = {10.1016/j.soildyn.2018.03.009},
  pages     = {299 -- 311},
  year      = {2018},
  abstract  = {In recent years, many onshore wind turbines are erected in seismic active regions and on soils with poor load bearing capacity, where pile grids are inevitable to transfer the loads into the ground. In this contribution, a realistic multi pile grid is designed to analyze the dynamics of a wind turbine tower including frequency dependent soil-structure-interaction. It turns out that different foundations on varying soil configurations heavily influence the vibration response. While the vibration amplitude is mostly attenuated, certain unfavorable combinations of structure and soil parameters lead to amplification in the range of the system's natural frequencies. This testifies the need for overall dynamic analysis in the assessment of the dynamic stability and the holistic frequency tuning of the turbines.},
  language  = {en}
}
@article{RosinButenwegCacciatoreetal.2018,
  author    = {Rosin, Julia and Butenweg, Christoph and Cacciatore, Pamela and Boesen, Niklas},
  title     = {Investigation of the seismic performance of modern masonry buildings during the Emilia Romagna earthquake series},
  series = {Mauerwerk},
  volume    = {22},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1022},
  doi       = {10.1002/dama.201800013},
  pages     = {238 -- 250},
  year      = {2018},
  abstract  = {The article presents the investigation of the seismic behaviour of a modern URM building located in the municipality of Finale Emilia in province of Modena, Northern Italy. The building is situated in the centre of the series of the 2012 Northern Italy earthquakes and has not suffered any damage during the earthquake series in 2012. The observed earthquake resistance of the building is compared with predicted resistances based on linear and nonlinear design approaches according to Eurocode. Furthermore, probabilistic analyses based on nonlinear calculation models taking into account scattering of the most relevant input parameters are carried out to identify their influence to the results and to derive fragility curves.},
  language  = {en}
}
@article{ButenwegMarinkovicSalatic2019,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Salatic, Ratko},
  title     = {Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading},
  series = {Bulletin of Earthquake Engineering},
  volume    = {17},
  journal   = {Bulletin of Earthquake Engineering},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1456},
  doi       = {10.1007/s10518-019-00602-7},
  pages     = {3397 -- 3422},
  year      = {2019},
  language  = {en}
}
@article{KleinButenwegKlinkel2017,
  author    = {Klein, Michel and Butenweg, Christoph and Klinkel, Sven},
  title     = {The Influence of Soil-Structure-Interaction on the Fatigue Analysis in the Foundation Design of Onshore Wind Turbines},
  series = {Procedia Engineering},
  volume    = {199},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2017.09.325},
  pages     = {3218 -- 3223},
  year      = {2017},
  language  = {en}
}
@article{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Earthquake-proof system for masonry infills in RC frame structures},
  series = {International Journal of Masonry Research and Innovation},
  volume    = {5},
  journal   = {International Journal of Masonry Research and Innovation},
  number    = {2},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {2056-9467},
  doi       = {10.1504/IJMRI.2020.106328},
  pages     = {185 -- 208},
  year      = {2020},
  language  = {de}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@article{ElDeibButenwegKlinkel2020,
  author    = {El-Deib, Khaled and Butenweg, Christoph and Klinkel, Sven},
  title     = {Erdbebennachweis von Mauerwerksbauten mit realistischen Modellen und erh{\"o}hten Verhaltensbeiwerten},
  series = {Bautechnik},
  volume    = {97},
  journal   = {Bautechnik},
  number    = {11},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  doi       = {10.1002/bate.202000016},
  pages     = {756 -- 765},
  year      = {2020},
  abstract  = {Die Anwendung des linearen Nachweiskonzepts auf Mauerwerksbauten f{\"u}hrt dazu, dass bereits heute Standsicherheitsnachweise f{\"u}r Geb{\"a}ude mit {\"u}blichen Grundrissen in Gebieten mit moderaten Erdbebeneinwirkungen nicht mehr gef{\"u}hrt werden k{\"o}nnen. Diese Problematik wird sich in Deutschland mit der Einf{\"u}hrung kontinuierlicher probabilistischer Erdbebenkarten weiter versch{\"a}rfen. Aufgrund der Erh{\"o}hung der seismischen Einwirkungen, die sich vielerorts ergibt, ist es erforderlich, die vorhandenen, bislang nicht ber{\"u}cksichtigten Tragf{\"a}higkeitsreserven in nachvollziehbaren Nachweiskonzepten in der Baupraxis verf{\"u}gbar zu machen. Der vorliegende Beitrag stellt ein Konzept f{\"u}r die geb{\"a}udespezifische Ermittlung von erh{\"o}hten Verhaltensbeiwerten vor. Die Verhaltensbeiwerte setzen sich aus drei Anteilen zusammen, mit denen die Lastumverteilung im Grundriss, die Verformungsf{\"a}higkeit und Energiedissipation sowie die {\"U}berfestigkeiten ber{\"u}cksichtigt werden. F{\"u}r die rechnerische Ermittlung dieser drei Anteile wird ein nichtlineares Nachweiskonzept auf Grundlage von Pushover-Analysen vorgeschlagen, in denen die Interaktionen von W{\"a}nden und Geschossdecken durch einen Einspanngrad beschrieben werden. F{\"u}r die Bestimmung der Einspanngrade wird ein nichtlinearer Modellierungsansatz eingef{\"u}hrt, mit dem die Interaktion von W{\"a}nden und Decken abgebildet werden kann. Die Anwendung des Konzepts mit erh{\"o}hten geb{\"a}udespezifischen Verhaltensbeiwerten wird am Beispiel eines Mehrfamilienhauses aus Kalksandsteinen demonstriert. Die Ergebnisse der linearen Nachweise mit erh{\"o}hten Verhaltensbeiwerten f{\"u}r dieses Geb{\"a}ude liegen deutlich n{\"a}her an den Ergebnissen nichtlinearer Nachweise und somit bleiben {\"u}bliche Grundrisse in Erdbebengebieten mit den traditionellen linearen Rechenans{\"a}tzen nachweisbar.},
  language  = {de}
}
@article{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Ausfachungen aus Ziegelmauerwerk in Stahlbetonrahmentragwerken unter Erdbebenbeanspruchung},
  series = {Mauerwerk},
  volume    = {24},
  journal   = {Mauerwerk},
  number    = {4},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022},
  doi       = {10.1002/dama.202000011},
  pages     = {194 -- 205},
  year      = {2020},
  abstract  = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk weisen nach Erdbeben h{\"a}ufig schwere Sch{\"a}den auf. Gr{\"u}nde hierf{\"u}r sind die Beanspruchungen der Ausfachungsw{\"a}nde durch die aufgezwungenen Rahmenverformungen in Wandebene und die gleichzeitig auftretenden Tr{\"a}gheitskr{\"a}fte senkrecht zur Wandebene in Kombination mit der konstruktiven Ausf{\"u}hrung des Ausfachungsmauerwerks. Die Ausfachung wird in der Regel knirsch gegen die Rahmenst{\"u}tzen gemauert, wobei der Verschluss der oberen Fuge mit M{\"o}rtel oder Montageschaum erfolgt. Dadurch kommt es im Erdbebenfall zu lokalen Interaktionen zwischen Ausfachung und Rahmen, die in der Folge zu einem Versagen einzelner Ausfachungsw{\"a}nde oder zu einem sukzessiven Versagen des Gesamtgeb{\"a}udes f{\"u}hren k{\"o}nnen. Die beobachteten Sch{\"a}den waren die Motivation daf{\"u}r, in dem europ{\"a}ischen Forschungsprojekt INSYSME f{\"u}r Stahlbetonrahmentragwerke mit Ausfachungen aus hochw{\"a}rmed{\"a}mmenden Ziegelmauerwerk innovative L{\"o}sungen zur Verbesserung des seismischen Verhaltens zu entwickeln. Der vorliegende Beitrag stellt die im Rahmen des Projekts von den deutschen Projektpartnern (Universit{\"a}t Kassel, SDA-engineering GmbH) entwickelten L{\"o}sungen vor und vergleicht deren seismisches Verhalten mit der traditionellen Ausf{\"u}hrung der Ausfachungsw{\"a}nde. Grundlage f{\"u}r den Vergleich sind statisch-zyklische Wandversuche und Simulationen auf Wandebene. Aus den Ergebnissen werden Empfehlungen f{\"u}r die erdbebensichere Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk abgeleitet.},
  language  = {de}
}
@article{RosinButenwegKlinkel2016,
  author    = {Rosin, Julia and Butenweg, Christoph and Klinkel, Sven},
  title     = {Stabilit{\"a}tsnachweis f{\"u}r seismisch beanspruchte Tankbauwerke nach dem LBA/MNA-Konzept},
  series = {Bauingenieur},
  volume    = {91},
  journal   = {Bauingenieur},
  number    = {12},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  doi       = {10.37544/0005-6650-2016-12-74},
  pages     = {518 -- 526},
  year      = {2016},
  abstract  = {Eine seismische Anregung verursacht in einem Fl{\"u}ssigkeitstank einen kombinierten Spannungszustand, was zu einem Stabilit{\"a}tsversagen der h{\"a}ufig sehr d{\"u}nnwandigen Konstruktionen f{\"u}hren kann. F{\"u}r die Durchf{\"u}hrung von Stabilit{\"a}tsnachweisen stehen verschiedene Verfahren zur Verf{\"u}gung. {\"U}blicherweise werden aus Gr{\"u}nden der Einfachheit spannungsbasierte Verfahren angewendet. Diese sind f{\"u}r Einheitslastf{\"a}lle experimentell abgesichert, wobei eine {\"U}bertragung auf kombinierte Spannungszust{\"a}nde wie im Erdbebenfall nur begrenzt m{\"o}glich ist. Alternativ kann ein globales, numerisches Konzept, das LBA/MNA-Verfahren, angewendet werden. Das Verfahren kombiniert eine materiell nichtlineare Berechnung (MNA) mit einer linearen Beulanalyse (LBA) und erfasst die Interaktion verschiedener gleichzeitig auftretender Beanspruchungen implizit im Nachweis. Dieser Beitrag demonstriert die Anwendung der Verfahren am Beispiel verschiedener Tankgeometrien mit H{\"o}he/Radius-Verh{\"a}ltnissen zwischen 1 ≤ H/R ≤ 2 und Radius/Tankwand-Verh{\"a}ltnissen zwischen 500 ≤ R/t ≤ 1000 und diskutiert zus{\"a}tzlich die Defizite der spannungsbasierten Nachweisverfahren.},
  language  = {de}
}
@article{ButenwegRosin2020,
  author    = {Butenweg, Christoph and Rosin, Julia},
  title     = {Seismischer Nachweis von Mauerwerksbauten in deutschen Erdbebengebieten},
  series = {Mauerwerk},
  volume    = {24},
  journal   = {Mauerwerk},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022},
  doi       = {10.1002/dama.202000006},
  pages     = {108 -- 113},
  year      = {2020},
  abstract  = {Mit finanzieller Unterst{\"u}tzung der Deutschen Gesellschaft f{\"u}r Mauerwerks- und Wohnungsbau e.V. (DGfM) und des Deutschen Instituts f{\"u}r Bautechnik in Berlin (DIBt) wurden zwei aufeinander aufbauende Forschungsvorhaben zur Verbesserung der seismischen Nachweise von Mauerwerksbauten in deutschen Erdbebengebieten durchgef{\"u}hrt. Zun{\"a}chst wurde das seismische Verhalten von drei modernen unbewehrten Mauerwerksgeb{\"a}uden in der Region Emilia Romagna in Italien w{\"a}hrend der Erdbebenserie im Jahr 2012 in Kooperation mit der Universit{\"a}t Pavia eingehend untersucht. Aufbauend auf den Erkenntnissen dieser Untersuchungen wurde ein verbessertes seismisches Bemessungskonzept f{\"u}r unbewehrte Mauerwerksbauten erarbeitet. Der Beitrag stellt die wesentlichen Ergebnisse dieser Forschungsarbeiten und deren Eingang in die Normung vor.},
  language  = {de}
}
@article{ButenwegKubalskiElDeibetal.2021,
  author    = {Butenweg, Christoph and Kubalski, Thomas and El-Deib, Khaled and Gellert, Christoph},
  title     = {Erdbebennachweis von Mauerwerksbauten nach DIN EN 1998-1/NA-2021},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {98},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {11},
  editor    = {Jesse, Dirk},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-0999},
  doi       = {10.1002/bate.202100064},
  pages     = {852 -- 863},
  year      = {2021},
  abstract  = {Mauerwerksbauten in Deutschland sind mit Einf{\"u}hrung des nationalen Anwendungsdokuments DIN EN 1998-1/NA auf Grundlage einer neuen probabilistischen Erdbebenkarte nachzuweisen. F{\"u}r erfolgreiche Erdbebennachweise {\"u}blicher Grundrissformen von Mauerwerksbauten stehen in dem zuk{\"u}nftigen Anwendungsdokument neue rechnerische Nachweism{\"o}glichkeiten zur Verf{\"u}gung, mit denen die Tragf{\"a}higkeitsreserven von Mauerwerksbauten in der Baupraxis mit einem {\"u}berschaubaren Aufwand besser in Ansatz gebracht werden k{\"o}nnen. Das Standardrechenverfahren ist weiterhin der kraftbasierte Nachweis, der nun mit h{\"o}heren Verhaltensbeiwerten im Vergleich zur DIN 4149 durchgef{\"u}hrt werden kann. Die h{\"o}heren Verhaltensbeiwerte basieren auf der besseren Ausnutzung der geb{\"a}udespezifischen Verformungsf{\"a}higkeit und Energiedissipation sowie der Lastumverteilung der Schubkr{\"a}fte im Grundriss mit Ansatz von Rahmentragwirkung durch Wand-Deckeninteraktionen. Alternativ dazu kann ein nichtlinearer Nachweis auf Grundlage von Pushover-Analysen zur Anwendung kommen. Vervollst{\"a}ndigt werden die Regelungen f{\"u}r Mauerwerksbauten durch neue Regelungen f{\"u}r nichttragende Innenw{\"a}nde und Außenmauerschalen. Der vorliegende Beitrag stellt die Grundlagen und Hintergr{\"u}nde der neuen rechnerischen Nachweise in DIN EN 1998-1/NA vor und demonstriert deren Anwendung an einem Beispiel aus der Praxis.},
  language  = {de}
}
@article{KubalskiButenwegElDeib2022,
  author    = {Kubalski, Thomas and Butenweg, Christoph and El-Deib, Khaled},
  title     = {Vereinfachte Ber{\"u}cksichtigung der Rahmentragwirkung in Mauerwerksgeb{\"a}uden},
  series = {Bautechnik},
  volume    = {99},
  journal   = {Bautechnik},
  number    = {12},
  editor    = {Jesse, Dirk},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {0932-8351},
  doi       = {10.1002/bate.202200081},
  pages     = {865 -- 928},
  year      = {2022},
  abstract  = {Aufgrund der gestiegenen Anforderungen durch h{\"o}here Ein-wirkungen aus Wind und Erdbeben ist eine Verbesserung und Optimierung der Berechnungs- und Bemessungsans{\"a}tze f{\"u}r Mauerwerksbauten erforderlich. Eine bessere Ausnutzung der Tragwerksreserven ist durch die Ber{\"u}cksichtigung der Rah-mentragwirkung mit einer Aktivierung der Deckenscheiben in den Rechenmodellen m{\"o}glich, die in der Praxis aufgrund der Komplexit{\"a}t der Wand-Decken-Interaktion bislang nicht aus-genutzt wird. Im vorliegenden Aufsatz wird ein vereinfachter Ansatz auf Grundlage der mitwirkenden Plattenbreite von Schubw{\"a}nden aus Mauerwerk vorgestellt, der die wesentli-chen Einfl ussfaktoren in parametrisierten Tabellen erfasst. Damit steht den Tragwerksplanern ein einfach anwendbares Werkzeug zur Verf{\"u}gung, um die Rahmentragwirkung in der Mauerwerksbemessung anzusetzen.},
  language  = {de}
}
@article{MarinkovićFloresCalvinistiButenweg2020,
  author    = {Marinković, Marko and Flores Calvinisti, Santiago and Butenweg, Christoph},
  title     = {Numerical analysis of reinforced concrete frame buildings with decoupled infill walls},
  series = {Building Materials and Structures},
  volume    = {63},
  journal   = {Building Materials and Structures},
  number    = {4},
  publisher = {Society for Materials and Structures Testing of Serbia},
  address   = {Belgrad},
  issn      = {2217-8139},
  doi       = {10.5937/GRMK2004013M},
  pages     = {13 -- 48},
  year      = {2020},
  abstract  = {Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characteristics of RC frame structures during earthquake excitation. Recently, significant effort was spent on studying decoupled infills, which are isolated from the surrounding frame usually by adding a gap between frame and infill. In this case, the frame deformation does not activate infill wall, thus infills are not influencing the behaviour of the frame. This paper presents the results of the investigation of the behaviour of RC frame buildings with the INODIS system that decouples masonry infills from the surrounding frame. Effect of masonry infill decoupling was investigated first on the one-bay onestorey frame. This was used as a base for parametric study on the frames with more bays and storeys, as well as on the building level. Change of stiffness and dynamic characteristics was analysed as well as response under earthquake loading. Comparison with the bare frame and traditionally infilled frame was performed. The results show that behaviour of the decoupled infilled frames is similar to the bare frame, whereas behaviour of frames with traditional infills is significantly different and demands complex numerical models. This means that if adequate decoupling is applied, design of},
  language  = {mul}
}
@article{ElDeibButenwegKlinkel2021,
  author    = {El-Deib, Khaled and Butenweg, Christoph and Klinkel, Sven},
  title     = {Erdbebennachweis von Mauerwerksbauten mit realistischen Modellen und erh{\"o}hten Verhaltensbeiwerten},
  series = {Mauerwerk},
  volume    = {2021},
  journal   = {Mauerwerk},
  number    = {3},
  editor    = {Jesse, Dirk},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1022},
  doi       = {10.1002/dama.202110014},
  pages     = {110 -- 119},
  year      = {2021},
  abstract  = {Die Anwendung des linearen Nachweiskonzepts auf Mauerwerksbauten f{\"u}hrt dazu, dass bereits heute Standsicherheitsnachweise f{\"u}r Geb{\"a}ude mit {\"u}blichen Grundrissen in Gebieten mit moderaten Erdbebeneinwirkungen nicht mehr gef{\"u}hrt werden k{\"o}nnen. Diese Problematik wird sich in Deutschland mit der Einf{\"u}hrung kontinuierlicher probabilistischer Erdbebenkarten weiter versch{\"a}rfen. Aufgrund der Erh{\"o}hung der seismischen Einwirkungen, die sich vielerorts ergibt, ist es erforderlich, die vorhandenen, bislang nicht ber{\"u}cksichtigten Tragf{\"a}higkeitsreserven in nachvollziehbaren Nachweiskonzepten in der Baupraxis verf{\"u}gbar zu machen. Der vorliegende Beitrag stellt ein Konzept f{\"u}r die geb{\"a}udespezifische Ermittlung von erh{\"o}hten Verhaltensbeiwerten vor. Die Verhaltensbeiwerte setzen sich aus drei Anteilen zusammen, mit denen die Lastumverteilung im Grundriss, die Verformungsf{\"a}higkeit und Energiedissipation sowie die {\"U}berfestigkeiten ber{\"u}cksichtigt werden. F{\"u}r die rechnerische Ermittlung dieser drei Anteile wird ein nichtlineares Nachweiskonzept auf Grundlage von Pushover-Analysen vorgeschlagen, in denen die Interaktionen von W{\"a}nden und Geschossdecken durch einen Einspanngrad beschrieben werden. F{\"u}r die Bestimmung der Einspanngrade wird ein nichtlinearer Modellierungsansatz eingef{\"u}hrt, mit dem die Interaktion von W{\"a}nden und Decken abgebildet werden kann. Die Anwendung des Konzepts mit erh{\"o}hten geb{\"a}udespezifischen Verhaltensbeiwerten wird am Beispiel eines Mehrfamilienhauses aus Kalksandsteinen demonstriert. Die Ergebnisse der linearen Nachweise mit erh{\"o}hten Verhaltensbeiwerten f{\"u}r dieses Geb{\"a}ude liegen deutlich n{\"a}her an den Ergebnissen nichtlinearer Nachweise und somit bleiben {\"u}bliche Grundrisse in Erdbebengebieten mit den traditionellen linearen Rechenans{\"a}tzen nachweisbar.},
  language  = {de}
}
@article{GoettscheAlexopoulosDuemmleretal.2019,
  author    = {G{\"o}ttsche, Joachim and Alexopoulos, Spiros and D{\"u}mmler, Andreas and Maddineni, S. K.},
  title     = {Multi-Mirror Array Calculations With Optical Error},
  pages     = {1 -- 6},
  year      = {2019},
  abstract  = {The optical performance of a 2-axis solar concentrator was simulated with the COMSOL Multiphysics® software. The concentrator consists of a mirror array, which was created using the application builder. The mirror facets are preconfigured to form a focal point. During tracking all mirrors are moved simultaneously in a coupled mode by 2 motors in two axes, in order to keep the system in focus with the moving sun. Optical errors on each reflecting surface were implemented in combination with the solar angular cone of ± 4.65 mrad. As a result, the intercept factor of solar radiation that is available to the receiver was calculated as a function of the transversal and longitudinal angles of incidence. In addition, the intensity distribution on the receiver plane was calculated as a function of the incidence angles.},
  language  = {en}
}
@article{ŠakićMarinkovićButenwegetal.2023,
  author    = {Šakić, Bogdan and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven},
  title     = {Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls},
  series = {Engineering Structures},
  volume    = {276},
  journal   = {Engineering Structures},
  editor    = {Yang, J.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.115342},
  year      = {2023},
  abstract  = {Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study.},
  language  = {en}
}
@article{FrauenrathHezelHeinrichsetal.2009,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Heinrichs, Uwe and Kozerke, Sebastian and Utting, Jane and Kob, Malte and Butenweg, Christoph and Boesiger, Peter and Niendorf, Thoralf},
  title     = {Feasibility of Cardiac Gating Free of Interference With Electro-Magnetic Fields at 1.5 Tesla, 3.0 Tesla and 7.0 Tesla Using an MR-Stethoscope},
  series = {Investigative Radiology},
  volume    = {44},
  journal   = {Investigative Radiology},
  number    = {9},
  publisher = {Lippincott Williams \& Wilkins ; (via Ovid)},
  address   = {Philadelphia, Pa},
  issn      = {1536-0210 (online)},
  doi       = {10.1097/RLI.0b013e3181b4c15e},
  pages     = {539 -- 547},
  year      = {2009},
  language  = {en}
}
@article{ButenwegMarinkovićKubalskietal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Kubalski, Thomas and Fehling, Ekkehard and Pfetzing, Thomas and Meyer, Udo},
  title     = {Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1)},
  series = {Ziegelindustrie international : ZI = Brick and tile industry international},
  journal   = {Ziegelindustrie international : ZI = Brick and tile industry international},
  number    = {4},
  editor    = {Voss, Michael},
  publisher = {Bauverlag BV GmbH},
  address   = {G{\"u}tersloh},
  issn      = {0341-0552},
  pages     = {30 -- 39},
  year      = {2018},
  abstract  = {Im Rahmen des europ{\"a}ischen Verbundprojekts INSYSME wurden von den deutschen Partnern die Systeme IMES und INODIS zur Verbesserung des seismischen Verhaltens von ausgefachten Stahlbetonrahmen entwickelt. Ziel beider Systeme ist es, Stahlbetonrahmen und Ausfachung zu entkoppeln, anstatt die Tragf{\"a}higkeit durch aufwendige und kostspielige zus{\"a}tzliche Bewehrungseinlagen zu erh{\"o}hen. Erste Ergebnisse des Systems IMES f{\"u}r Belastungen in und senkrecht zu der Wandebene werden vorgestellt.},
  language  = {de}
}
@article{MarinkovićButenweg2022,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading},
  series = {Construction and Building Materials},
  volume    = {318},
  journal   = {Construction and Building Materials},
  number    = {1},
  editor    = {Ford, Michael C.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0526},
  doi       = {10.1016/j.conbuildmat.2021.126041},
  year      = {2022},
  abstract  = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.},
  language  = {en}
}
@article{RuppRiekeHandschuhetal.2020,
  author    = {Rupp, Matthias and Rieke, Christian and Handschuh, Nils and Kuperjans, Isabel},
  title     = {Economic and ecological optimization of electric bus charging considering variable electricity prices and CO₂eq intensities},
  series = {Transportation Research Part D: Transport and Environment},
  volume    = {81},
  journal   = {Transportation Research Part D: Transport and Environment},
  number    = {Article 102293},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1361-9209},
  doi       = {10.1016/j.trd.2020.102293},
  year      = {2020},
  abstract  = {In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses. In this study, we present a new methodology for optimizing the vehicles' charging time as a function of the parameters CO₂eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO₂eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle. In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6\% compared to charging at a fixed electricity price. The savings potential of CO₂eq emissions is similar, at 14.9\%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO₂eq intensity is also low in this period, but midday charging leads to the largest savings in CO₂eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5\% CO₂eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.},
  language  = {en}
}
@article{SchwarzerGoettscheJellinghaus2006,
  author    = {Schwarzer, Klemens and G{\"o}ttsche, Joachim and Jellinghaus, Sabine},
  title     = {FORSCHUNG UND TECHNIK - Messtechnik - Was will der Nutzer? Eine langfristige Studie hat Nutzer zu einer Farblichtsteuerung befragt (Teil 2)},
  series = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 9},
  journal   = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 9},
  isbn      = {0024-2861},
  pages     = {862 -- 867},
  year      = {2006},
  language  = {de}
}
@article{Kuperjans1996,
  author    = {Kuperjans, Isabel},
  title     = {Exergetische und exergo{\"o}konomische Analyse thermischer Prozesse},
  series = {Arbeitsbericht / Institut f{\"u}r Wirtschaftswissenschaften, Rheinisch-Westf{\"a}lische Technische Hochschule Aachen},
  journal   = {Arbeitsbericht / Institut f{\"u}r Wirtschaftswissenschaften, Rheinisch-Westf{\"a}lische Technische Hochschule Aachen},
  number    = {06},
  year      = {1996},
  language  = {de}
}
@article{KuperjansGuerzenichRoosen2005,
  author    = {Kuperjans, Isabel and G{\"u}rzenich, D. and Roosen, P.},
  title     = {Kostenfunktionen im WWW : Unterst{\"u}tzung der Auslegung energietechnischer Anlagen und deren Verschaltungen},
  series = {Gasw{\"a}rme international (GWI)},
  volume    = {54},
  journal   = {Gasw{\"a}rme international (GWI)},
  number    = {1},
  issn      = {0020-9384},
  pages     = {19 -- 21},
  year      = {2005},
  language  = {de}
}
@article{KuperjansEsserMeyeretal.2000,
  author    = {Kuperjans, Isabel and Esser, J. and Meyer, J{\"o}rg and Donner, O.},
  title     = {Gestaltung und Bewertung von Energieanlagen unter {\"o}kologischen, wirtschaftlichen und technischen Gesichtspunkten},
  series = {Umweltwirtschaftsforum : UWF},
  volume    = {8},
  journal   = {Umweltwirtschaftsforum : UWF},
  number    = {3},
  issn      = {0943-3481},
  pages     = {53 -- 58},
  year      = {2000},
  language  = {de}
}
@article{AugensteinHerbergsKuperjans2006,
  author    = {Augenstein, Eckardt and Herbergs, S. and Kuperjans, Isabel},
  title     = {TOP-Energy : ein Werkzeug zur Optimierung der Geb{\"a}udeenergieversorgung},
  series = {KI : K{\"a}lte, Luft, Klimatechnik},
  journal   = {KI : K{\"a}lte, Luft, Klimatechnik},
  number    = {5},
  issn      = {1865-5432},
  pages     = {198 -- 201},
  year      = {2006},
  language  = {de}
}
@article{KuperjansStarkeEsseretal.2000,
  author    = {Kuperjans, Isabel and Starke, M. and Esser, J. and [u.a.],},
  title     = {Analyse und Konzeption von Energieanlagen unter {\"o}kologischen, wirtschaftlichen und technischen Gesichtspunkten},
  series = {WLB : Umwelttechnik f{\"u}r Industrie und Kommune},
  volume    = {44},
  journal   = {WLB : Umwelttechnik f{\"u}r Industrie und Kommune},
  number    = {11/12},
  issn      = {0341-2679},
  pages     = {26 -- 29},
  year      = {2000},
  language  = {de}
}
@article{PauksztatKuperjansMeyer2005,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg},
  title     = {Formeln statt Zahlen : Referenzwerte Formeln zur energetischen Bewertung von Produktionsanlagen},
  series = {BWK : das Energie-Fachmagazin},
  volume    = {57},
  journal   = {BWK : das Energie-Fachmagazin},
  number    = {12},
  issn      = {0006-9612},
  pages     = {52 -- 55},
  year      = {2005},
  language  = {de}
}
@article{PauksztatKuperjansMeyer2005,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg},
  title     = {Produktbezogene Referenzwerte f{\"u}r Energieeffizienz und CO2-Emissionen},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {55},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {6},
  issn      = {0013-743X},
  pages     = {374 -- 376},
  year      = {2005},
  language  = {de}
}
@article{SattlerRoegerSchwarzboezletal.2020,
  author    = {Sattler, Johannes Christoph and R{\"o}ger, Marc and Schwarzb{\"o}zl, Peter and Buck, Reiner and Macke, Ansgar and Raeder, Christian and G{\"o}ttsche, Joachim},
  title     = {Review of heliostat calibration and tracking control methods},
  series = {Solar Energy},
  volume    = {207},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.solener.2020.06.030},
  pages     = {110 -- 132},
  year      = {2020},
  abstract  = {Large scale central receiver systems typically deploy between thousands to more than a hundred thousand heliostats. During solar operation, each heliostat is aligned individually in such a way that the overall surface normal bisects the angle between the sun's position and the aim point coordinate on the receiver. Due to various tracking error sources, achieving accurate alignment ≤1 mrad for all the heliostats with respect to the aim points on the receiver without a calibration system can be regarded as unrealistic. Therefore, a calibration system is necessary not only to improve the aiming accuracy for achieving desired flux distributions but also to reduce or eliminate spillage. An overview of current larger-scale central receiver systems (CRS), tracking error sources and the basic requirements of an ideal calibration system is presented. Leading up to the main topic, a description of general and specific terms on the topics heliostat calibration and tracking control clarifies the terminology used in this work. Various figures illustrate the signal flows along various typical components as well as the corresponding monitoring or measuring devices that indicate or measure along the signal (or effect) chain. The numerous calibration systems are described in detail and classified in groups. Two tables allow the juxtaposition of the calibration methods for a better comparison. In an assessment, the advantages and disadvantages of individual calibration methods are presented.},
  language  = {en}
}
@article{SchwarzerGoettscheJellinghaus2006,
  author    = {Schwarzer, Klemens and G{\"o}ttsche, Joachim and Jellinghaus, Sabine},
  title     = {FORSCHUNG UND TECHNIK - Messtechnik - Was will der Nutzer? - Eine langfristige Studie hat Nutzer zu einer Farblichtsteuerung befragt. Teil 1: Untersuchungsdesign, Leuchtenentwicklung und Messwerterfassung},
  series = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 7-8},
  journal   = {Licht : Planung, Design, Technik, Handel ; Organ der Deutschen Lichttechnischen Gesellschaft e.V. (LiTG) ; Organ des Normenausschusses Lichttechnik (FNL) im DIN Deutsches Institut f{\"u}r Normung e.V. ; Organ des Verbandes Wohnraumleuchten-, Lampenschirm und . 58 (2006), H. 7-8},
  isbn      = {0024-2861},
  pages     = {754 -- 759},
  year      = {2006},
  language  = {de}
}
@article{HerrmannSchwarzenbartDittmannGabriel2019,
  author    = {Herrmann, Ulf and Schwarzenbart, Marc and Dittmann-Gabriel, S{\"o}ren},
  title     = {Speicher statt Kohle. Integration thermischer Stromspeicher in vorhandene Kraftwerksstandorte},
  series = {BWK : Das Energie-Fachmagazin},
  volume    = {71},
  journal   = {BWK : Das Energie-Fachmagazin},
  number    = {4},
  publisher = {Springer-VDI-Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4883},
  pages     = {42 -- 45},
  year      = {2019},
  language  = {de}
}
@article{GeimerSauerbornHoffschmidtetal.2010,
  author    = {Geimer, Konstantin and Sauerborn, Markus and Hoffschmidt, Bernhard and Schmitz, Mark and G{\"o}ttsche, Joachim},
  title     = {Test Facility for Absorber Specimens of Solar Tower Power Plants},
  series = {Advances in Science and Technology. 74 (2010)},
  journal   = {Advances in Science and Technology. 74 (2010)},
  pages     = {266 -- 271},
  year      = {2010},
  language  = {en}
}
@article{RuppHandschuhRiekeetal.2019,
  author    = {Rupp, Matthias and Handschuh, Nils and Rieke, Christian and Kuperjans, Isabel},
  title     = {Contribution of country-specific electricity mix and charging time to environmental impact of battery electric vehicles: A case study of electric buses in Germany},
  series = {Applied Energy},
  volume    = {237},
  journal   = {Applied Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0306-2619},
  doi       = {10.1016/j.apenergy.2019.01.059},
  pages     = {618 -- 634},
  year      = {2019},
  language  = {en}
}
@article{JellinghausGoettscheHoffschmidt2006,
  author    = {Jellinghaus, Sabine and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard},
  title     = {Beleuchtung mit gesteuertem Farblicht - Bewertung eines Prototypen},
  series = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  journal   = {Zw{\"o}lftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 26./27. Januar 2006, Kloster Banz, Bad Staffelstein / OTTI - Training, Seminare, Tagungen. [Fachliche Gesamtleitung: Claus Steffan. Veranst.: OTTI, Bereich Erneuerbare Energien. Mitveranst.: Architektenkammer Baden-W{\"u}rttemberg, Stuttgart ...] / . - (Wissen f{\"u}r Profis)},
  publisher = {OTTI, Bereich Erneuerbare Energien},
  address   = {Regensburg},
  isbn      = {3-934681-43-3},
  pages     = {89 -- 93},
  year      = {2006},
  language  = {de}
}
@article{WarerkarSchmitzGoettscheetal.2007,
  author    = {Warerkar, Shashikant and Schmitz, Stefan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard},
  title     = {Wirtschaftlich und flexibel : Luft-Sand-W{\"a}rme{\"u}bertrager f{\"u}r die Energiespeicherung bei Temperaturen bis 800 °C},
  series = {Verfahrenstechnik. 41 (2007), H. 4},
  journal   = {Verfahrenstechnik. 41 (2007), H. 4},
  isbn      = {0175-5315},
  pages     = {72 -- 73},
  year      = {2007},
  language  = {de}
}
@article{HoffstadtPohenDickeetal.2020,
  author    = {Hoffstadt, Kevin and Pohen, Gino D. and Dicke, Max D. and Paulsen, Svea and Krafft, Simone and Zang, Joachim W. and Fonseca-Zang, Warde A. da and Leite, Athaydes and Kuperjans, Isabel},
  title     = {Challenges and prospects of biogas from energy cane as supplement to bioethanol production},
  series = {Agronomy},
  volume    = {10},
  journal   = {Agronomy},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4395},
  doi       = {10.3390/agronomy10060821},
  year      = {2020},
  abstract  = {Innovative breeds of sugar cane yield up to 2.5 times as much organic matter as conventional breeds, resulting in a great potential for biogas production. The use of biogas production as a complementary solution to conventional and second-generation ethanol production in Brazil may increase the energy produced per hectare in the sugarcane sector. Herein, it was demonstrated that through ensiling, energy cane can be conserved for six months; the stored cane can then be fed into a continuous biogas process. This approach is necessary to achieve year-round biogas production at an industrial scale. Batch tests revealed specific biogas potentials between 400 and 600 LN/kgVS for both the ensiled and non-ensiled energy cane, and the specific biogas potential of a continuous biogas process fed with ensiled energy cane was in the same range. Peak biogas losses through ensiling of up to 27\% after six months were observed. Finally, compared with second-generation ethanol production using energy cane, the results indicated that biogas production from energy cane may lead to higher energy yields per hectare, with an average energy yield of up to 162 MWh/ha. Finally, the Farm²CBG concept is introduced, showing an approach for decentralized biogas production.},
  language  = {en}
}
@article{Kuperjans2011,
  author    = {Kuperjans, Isabel},
  title     = {Gute Planung ist alles : Energieeffizienz in der Pharmaproduktion},
  series = {Pharma + Food},
  volume    = {2011},
  journal   = {Pharma + Food},
  number    = {2},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  issn      = {1434-8942},
  pages     = {8 -- 10},
  year      = {2011},
  language  = {de}
}
@article{BlockViebahnJungbluth2024,
  author    = {Block, Simon and Viebahn, Peter and Jungbluth, Christian},
  title     = {Analysing direct air capture for enabling negative emissions in Germany: an assessment of the resource requirements and costs of a potential rollout in 2045},
  series = {Frontiers in Climate},
  volume    = {6},
  journal   = {Frontiers in Climate},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {2624-9553},
  doi       = {10.3389/fclim.2024.1353939},
  pages     = {18 Seiten},
  year      = {2024},
  abstract  = {Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46\% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4\% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40\% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.},
  language  = {en}
}
@article{MaurerRiekeSchemmetal.2023,
  author    = {Maurer, Florian and Rieke, Christian and Schemm, Ralf and Stollenwerk, Dominik},
  title     = {Analysis of an urban grid with high photovoltaic and e-mobility penetration},
  series = {Energies},
  volume    = {16},
  journal   = {Energies},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en16083380},
  pages     = {18 Seiten},
  year      = {2023},
  abstract  = {This study analyses the expected utilization of an urban distribution grid under high penetration of photovoltaic and e-mobility with charging infrastructure on a residential level. The grid utilization and the corresponding power flow are evaluated, while varying the control strategies and photovoltaic installed capacity in different scenarios. Four scenarios are used to analyze the impact of e-mobility. The individual mobility demand is modelled based on the largest German studies on mobility "Mobilit{\"a}t in Deutschland", which is carried out every 5 years. To estimate the ramp-up of photovoltaic generation, a potential analysis of the roof surfaces in the supply area is carried out via an evaluation of an open solar potential study. The photovoltaic feed-in time series is derived individually for each installed system in a resolution of 15 min. The residential consumption is estimated using historical smart meter data, which are collected in London between 2012 and 2014. For a realistic charging demand, each residential household decides daily on the state of charge if their vehicle requires to be charged. The resulting charging time series depends on the underlying behavior scenario. Market prices and mobility demand are therefore used as scenario input parameters for a utility function based on the current state of charge to model individual behavior. The aggregated electricity demand is the starting point of the power flow calculation. The evaluation is carried out for an urban region with approximately 3100 residents. The analysis shows that increased penetration of photovoltaics combined with a flexible and adaptive charging strategy can maximize PV usage and reduce the need for congestion-related intervention by the grid operator by reducing the amount of kWh charged from the grid by 30\% which reduces the average price of a charged kWh by 35\% to 14 ct/kWh from 21.8 ct/kWh without PV optimization. The resulting grid congestions are managed by implementing an intelligent price or control signal. The analysis took place using data from a real German grid with 10 subgrids. The entire software can be adapted for the analysis of different distribution grids and is publicly available as an open-source software library on GitHub.},
  language  = {en}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@article{RegerKuhnhenneHachuletal.2019,
  author    = {Reger, Vitali and Kuhnhenne, Markus and Hachul, Helmut and D{\"o}ring, Bernd and Blanke, Tobias and G{\"o}ttsche, Joachim},
  title     = {Plusenergiegeb{\"a}ude 2.0 in Stahlleichtbauweise},
  series = {Stahlbau},
  volume    = {88},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-journal), 0038-9145 (print)},
  doi       = {10.1002/stab.201900034},
  pages     = {522 -- 528},
  year      = {2019},
  language  = {de}
}