@article{Havermann2005,
  author    = {Havermann, Marc},
  title     = {Effects of the shock tube open-end shape on vortex loops released from it / Kainuma, M. ; Havermann, M. ; Sun, M. ; Takayama, K.},
  series = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  journal   = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-22497-6},
  pages     = {505 -- 510},
  year      = {2005},
  language  = {en}
}
@article{HavermannSeilerBolleretal.2005,
  author    = {Havermann, Marc and Seiler, F. and Boller, F. and Mangold, P.},
  title     = {Operation of the ISL transonic shock tube in a high subsonic flow regime / Seiler, F. ; Havermann, M. ; Boller, F. ; Mangold, P. ; Takayama K.},
  series = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  journal   = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-22497-6},
  pages     = {307 -- 312},
  year      = {2005},
  language  = {en}
}
@article{HavermannEndeSeileretal.2005,
  author    = {Havermann, Marc and Ende, H. and Seiler, F. and Schwenzer, M.},
  title     = {Shock tunnel measurement of the interaction amplification factor for a hot gas side jet in a supersonic cross flow / Havermann, M. ; Ende, H. ; Seiler, F. ; Schwenzer, M.},
  series = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  journal   = {Shock Waves : Proceedings of the 24th International Symposium on Shock Waves Beijing, China July 11-16, 2004 / edited by Z. Jiang},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-22497-6},
  pages     = {113 -- 118},
  year      = {2005},
  language  = {en}
}
@book{HavermannSeilerGeorgeetal.2004,
  author    = {Havermann, Marc and Seiler, F. and George, A. and Srulijes, J.},
  title     = {Doppler Picture Velovimetry (DPV) applied to high speed shock tunnel flows : 11th International Symposium on Flow Visualization, University of Notre Dame, Notre Dame/IN, USA, August 9 - 12, 2004 / Institut Franco-Allemand de Recherches de Saint-Louis. Seiler, F. ...},
  publisher = {ISL},
  address   = {Saint-Louis},
  year      = {2004},
  language  = {en}
}
@article{KowalskiMcElwaine2013,
  author    = {Kowalski, Julia and McElwaine, Jim N.},
  title     = {Shallow two-component gravity-driven flows with vertical variation},
  series = {Journal of Fluid Mechanics},
  volume    = {714},
  journal   = {Journal of Fluid Mechanics},
  publisher = {Cambridge Univ. Press},
  address   = {Cambridge},
  isbn      = {0022-1120},
  pages     = {434 -- 462},
  year      = {2013},
  language  = {en}
}
@article{OlaruKowalskiSethietal.2012,
  author    = {Olaru, Alexandra Maria and Kowalski, Julia and Sethi, Vaishali and Bl{\"u}mich, Bernhard},
  title     = {Exchange relaxometry of flow at small P{\´e}clet numbers in a glass bead pack},
  series = {Journal of Magnetic Resonance (JMR)},
  volume    = {220},
  journal   = {Journal of Magnetic Resonance (JMR)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1096-0856},
  doi       = {10.1016/j.jmr.2012.04.015},
  pages     = {32 -- 44},
  year      = {2012},
  abstract  = {In this paper we consider low P{\´e}clet number flow in bead packs. A series of relaxation exchange experiments has been conducted and evaluated by ILT analysis. In the resulting correlation maps, we observed a collapse of the signal and a translation towards smaller relaxation times with increasing flow rates, as well as a signal tilt with respect to the diagonal. In the discussion of the phenomena we present a mathematical theory for relaxation exchange experiments that considers both diffusive and advective transport. We perform simulations based on this theory and discuss them with respect to the conducted experiments.},
  language  = {en}
}
@article{FischerKowalskiPudasaini2012,
  author    = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P.},
  title     = {Topographic curvature effects in applied avalanche modelling},
  series = {Cold Regions Science and Technology},
  volume    = {74-75},
  journal   = {Cold Regions Science and Technology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2012.01.005},
  pages     = {21 -- 30},
  year      = {2012},
  abstract  = {This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.},
  language  = {en}
}
@article{BuehlerChristenKowalskietal.2011,
  author    = {B{\"u}hler, Yves and Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {Sensitivity of snow avalanche simulations to digital elevation model quality and resolution},
  series = {Annals of Glaciology},
  volume    = {52},
  journal   = {Annals of Glaciology},
  number    = {58},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  isbn      = {1727-5644},
  pages     = {72 -- 80},
  year      = {2011},
  abstract  = {Digital elevation models (DEMs), represent the three-dimensional terrain and are the basic input for numerical snow avalanche dynamics simulations. DEMs can be acquired using topographic maps or remote-sensing technologies, such as photogrammetry or lidar. Depending on the acquisition technique, different spatial resolutions and qualities are achieved. However, there is a lack of studies that investigate the sensitivity of snow avalanche simulation algorithms to the quality and resolution of DEMs. Here, we perform calculations using the numerical avalance dynamics model RAMMS, varying the quality and spatial resolution of the underlying DEMs, while holding the simulation parameters constant. We study both channelized and open-terrain avalanche tracks with variable roughness. To quantify the variance of these simulations, we use well-documented large-scale avalanche events from Davos, Switzerland (winter 2007/08), and from our large-scale avalanche test site, Valĺee de la Sionne (winter 2005/06). We find that the DEM resolution and quality is critical for modeled flow paths, run-out distances, deposits, velocities and impact pressures. Although a spatial resolution of ~25 m is sufficient for large-scale avalanche modeling, the DEM datasets must be checked carefully for anomalies and artifacts before using them for dynamics calculations.},
  language  = {en}
}
@article{ChristenBarteltKowalski2010,
  author    = {Christen, Marc and Bartelt, Perry and Kowalski, Julia},
  title     = {Back calculation of the In den Arelen avalanche with RAMMS: Interpretation of model results},
  series = {Annals of Glaciology},
  volume    = {51},
  journal   = {Annals of Glaciology},
  number    = {54},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  isbn      = {1727-5644},
  doi       = {10.3189/172756410791386553},
  pages     = {161 -- 168},
  year      = {2010},
  abstract  = {Two- and three-dimensional avalanche dynamics models are being increasingly used in hazard-mitigation studies. These models can provide improved and more accurate results for hazard mapping than the simple one-dimensional models presently used in practice. However, two- and three-dimensional models generate an extensive amount of output data, making the interpretation of simulation results more difficult. To perform a simulation in three-dimensional terrain, numerical models require a digital elevation model, specification of avalanche release areas (spatial extent and volume), selection of solution methods, finding an adequate calculation resolution and, finally, the choice of friction parameters. In this paper, the importance and difficulty of correctly setting up and analysing the results of a numerical avalanche dynamics simulation is discussed. We apply the two-dimensional simulation program RAMMS to the 1968 extreme avalanche event In den Arelen. We show the effect of model input variations on simulation results and the dangers and complexities in their interpretation.},
  language  = {en}
}
@article{ChristenKowalskiBartelt2010,
  author    = {Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain},
  series = {Cold Regions Science and Technology},
  volume    = {63},
  journal   = {Cold Regions Science and Technology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2010.04.005},
  pages     = {1 -- 14},
  year      = {2010},
  abstract  = {Numerical avalanche dynamics models have become an essential part of snow engineering. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, their application poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to construct hazard scenarios which involve the careful specification of initial conditions (release zone location and dimensions) and definition of appropriate friction parameters. The interpretation of simulation results requires an understanding of the numerical solution schemes and easy to use visualization tools. We discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with accurate second-order numerical solution schemes. The model allows the specification of multiple release zones in three-dimensional terrain. Snow cover entrainment is considered. Furthermore, two different flow rheologies can be applied: the standard Voellmy-Salm (VS) approach or a random kinetic energy (RKE) model, which accounts for the random motion and inelastic interaction between snow granules. We present the governing differential equations, highlight some of the input and output features of RAMMS and then apply the models with entrainment to simulate two well-documented avalanche events recorded at the Vall{\´e}e de la Sionne test site.},
  language  = {en}
}
@article{FischerKowalskiPudasainietal.2009,
  author    = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P. and Miller, S. A.},
  title     = {Dynamic Avalanche Modeling in Natural Terrain},
  series = {International Snow Science Workshop, Davos 2009, Proceedings ; Proc. ISSW 2009},
  journal   = {International Snow Science Workshop, Davos 2009, Proceedings ; Proc. ISSW 2009},
  pages     = {448 -- 452},
  year      = {2009},
  abstract  = {The powerful avalanche simulation toolbox RAMMS (Rapid Mass Movements) is based on a depth-averaged hydrodynamic system of equations with a Voellmy-Salm friction relation. The two empirical friction parameters μ and � correspond to a dry Coulomb friction and a viscous resistance, respectively. Although μ and � lack a proper physical explanation, 60 years of acquired avalanche data in the Swiss Alps made a systematic calibration possible. RAMMS can therefore successfully model avalanche flow depth, velocities, impact pressure and run out distances. Pudasaini and Hutter (2003) have proposed extended, rigorously derived model equations that account for local curvature and twist. A coordinate transformation into a reference system, applied to the actual mountain topography of the natural avalanche path, is performed. The local curvature and the twist of the avalanche path induce an additional term in the overburden pressure. This leads to a modification of the Coulomb friction, the free-surface pressure gradient, the pressure induced by the channel, and the gravity components along and normal to the curved and twisted reference surface. This eventually guides the flow dynamics and deposits of avalanches. In the present study, we investigate the influence of curvature on avalanche flow in real mountain terrain. Simulations of real avalanche paths are performed and compared for the different models approaches. An algorithm to calculate curvature in real terrain is introduced in RAMMS. This leads to a curvature dependent friction relation in an extended version of the Voellmy-Salm model equations. Our analysis provides yet another step in interpreting the physical meaning and significance of the friction parameters used in the RAMMS computational environment.},
  language  = {en}
}
@inproceedings{ChristenBarteltKowalskietal.2008,
  author    = {Christen, Marc and Bartelt, Perry and Kowalski, Julia and Stoffel, Lukus},
  title     = {Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS},
  series = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008},
  booktitle = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008},
  pages     = {709 -- 716},
  year      = {2008},
  abstract  = {Numerical models have become an essential part of snow avalanche engineering. Recent advances in understanding the rheology of flowing snow and the mechanics of entrainment and deposition have made numerical models more reliable. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, the application of numerical models poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to specify initial conditions (release zone dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this paper we discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with first and second-order numerical solution schemes. A tremendous effort has been invested in the implementation of advanced input and output features. Simulation results are therefore clearly and easily visualized to simplify their interpretation. More importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model performance. In this paper we present the governing differential equations, highlight some of the input and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that occurred in April 2008, near Klosters/Monbiel, Switzerland.},
  language  = {en}
}
@article{McArdellBarteltKowalski2007,
  author    = {McArdell, Brian W. and Bartelt, Perry and Kowalski, Julia},
  title     = {Field observations of basal forces and fluid pore pressure in a debris flow},
  series = {Geophysical Research Letters (GRL)},
  volume    = {34},
  journal   = {Geophysical Research Letters (GRL)},
  number    = {7},
  isbn      = {0094-8276},
  year      = {2007},
  abstract  = {Using results from an 8 m2 instrumented force plate we describe field measurements of normal and shear stresses, and fluid pore pressure for a debris flow. The flow depth increased from 0.1 to 1 m within the first 12 s of flow front arrival, remained relatively constant until 100 s, and then gradually decreased to 0.5 m by 600 s. Normal and shear stresses and pore fluid pressure varied in-phase with the flow depth. Calculated bulk densities are ρb = 2000-2250 kg m-3 for the bulk flow and ρf = 1600-1750 kg m-3 for the fluid phase. The ratio of effective normal stress to shear stress yields a Coulomb basal friction angle of ϕ = 26° at the flow front. We did not find a strong correlation between the degree of agitation in the flow, estimated using the signal from a geophone on the force plate, and an assumed dynamic pore fluid pressure. Our data support the idea that excess pore-fluid pressures are long lived in debris flows and therefore contribute to their unusual mobility.},
  language  = {en}
}
@book{JanserHavermann2012,
  author    = {Janser, Frank and Havermann, Marc},
  title     = {Inkompressible Str{\"o}mungen},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {978-3-86130-446-3},
  pages     = {189 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{BoernerFunkeHendricketal.2009,
  author    = {B{\"o}rner, Sebastian and Funke, Harald and Hendrick, P. and Recker, E.},
  title     = {LES of Jets In Cross-Flow and Application to the "Micromix" Hydrogen Combustion},
  series = {XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada},
  booktitle = {XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada},
  isbn      = {9781615676064},
  pages     = {1555 -- 1561},
  year      = {2009},
  language  = {en}
}
@inproceedings{KowalskiBarteltMcElwaine2007,
  author    = {Kowalski, Julia and Bartelt, Perry and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2007},
  language  = {en}
}
@inproceedings{KowalskiMcElwaine2008,
  author    = {Kowalski, Julia and McElwaine, J.},
  title     = {Two-phase debris flow modeling},
  series = {Geophysical Research Abstracts},
  booktitle = {Geophysical Research Abstracts},
  year      = {2008},
  language  = {en}
}
@inproceedings{OlaruKowalskiSethietal.2011,
  author    = {Olaru, Alexandra Maria and Kowalski, Julia and Sethi, Vaishali and Bl{\"u}mich, Bernhard},
  title     = {Fluid Transport in Porous Media probed by Relaxation-Exchange NMR},
  series = {2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.},
  booktitle = {2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.},
  year      = {2011},
  language  = {en}
}
@article{HeierliPurvesFelberetal.2004,
  author    = {Heierli, Joachim and Purves, Ross S. and Felber, Andreas and Kowalski, Julia},
  title     = {Verification of nearest-neighbours interpretations in avalanche forecasting},
  series = {Annals of Glaciology},
  volume    = {38},
  journal   = {Annals of Glaciology},
  number    = {1},
  isbn      = {1727-5644},
  pages     = {84 -- 88},
  year      = {2004},
  abstract  = {This paper examines the positive and negative aspects of a range of interpretations of nearest-neighbours models. Measures-oriented and distributionoriented verification methods are applied to categorial, probabilistic and descriptive interpretations of nearest neighbours used operationally in avalanche forecasting in Scotland and Switzerland. The dependence of skill and accuracy measures on base rate is illustrated. The purpose of the forecast and the definition of events are important variables in determining the quality of the forecast. A discussion of the application of different interpretations in operational avalanche forecasting is presented.},
  language  = {en}
}
@misc{BaumgartnerWunderlichJaunichetal.2012,
  author    = {Baumgartner, Thomas and Wunderlich, Florian and Jaunich, Arthur and Sato, Tomoo and Bundy, Georg and Grießmann, Nadine and Kowalski, Julia and Burghardt, Stefan and Hanebrink, J{\"o}rg},
  title     = {Lighting the way: Perspectives on the global lighting market},
  edition   = {2nd ed.},
  address   = {McKinsey},
  pages     = {58},
  year      = {2012},
  language  = {en}
}
@phdthesis{Kowalski2008,
  author    = {Kowalski, Julia},
  title     = {Two-phase Modeling of Debris Flows},
  publisher = {Mensch und Buch},
  address   = {Berlin},
  isbn      = {978-3-86664-524-0},
  pages     = {148},
  year      = {2008},
  language  = {en}
}
@inproceedings{Kowalski2006,
  author    = {Kowalski, Julia},
  title     = {Numerical Debris Flow Simulation},
  series = {Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006},
  booktitle = {Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006},
  pages     = {1},
  year      = {2006},
  language  = {en}
}
@inproceedings{KowalskiMcArdellBartelt2006,
  author    = {Kowalski, Julia and McArdell, B. W. and Bartelt, Perry},
  title     = {A comparison of two approaches to modeling multiphase gravity currents},
  series = {Geophysical Research Abstracts},
  volume    = {8},
  booktitle = {Geophysical Research Abstracts},
  year      = {2006},
  language  = {en}
}
@inproceedings{FunkeBoernerKeinzetal.2012,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Keinz, Jan and Kusterer, K. and Kroninger, D. and Kitajima, J. and Kazari, M. and Horikama, A.},
  title     = {Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications},
  series = {Proceedings of ASME Turbo Expo 2012},
  booktitle = {Proceedings of ASME Turbo Expo 2012},
  pages     = {11},
  year      = {2012},
  language  = {en}
}
@inproceedings{FunkeBoernerKeinzetal.2012,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Keinz, Jan and Hendrick, P. and Recker, E.},
  title     = {Low NOx Hydrogen combustion chamber for industrial gas turbine applications", 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery},
  series = {ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012},
  booktitle = {ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012},
  year      = {2012},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Required aerodynamic technologies},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_5},
  pages     = {69 -- 96},
  year      = {1997},
  abstract  = {In the preceeding chapters on "Son of Concorde, a Technology Challenge" and "Aerodynamic Multipoint Design Challenge" it was explained, that a well balanced contribution of new technologies in all major disciplines is required for realisation of a new Supersonic Commercial Transport (SCT). One of these technologies - usually one of the most important for aircraft-is aerodynamics. Here, the required "pure" aerodynamic technologies are specified in more detail, according to our present knowledge. Increasing insight into the problems may change the balance of importance of the individual technologies and may require some more contributions. We must never confine our knowledge to the knowledge base of an expert at a given time, but must stay open for new insights.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Certification of supersonic civil transports},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_6},
  pages     = {97 -- 103},
  year      = {1997},
  abstract  = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Supersonic laminar flow},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_18},
  pages     = {275 -- 290},
  year      = {1997},
  abstract  = {Supersonic transports are very drag sensitive. Technology to reduce drag by application of laminar flow, therefore, will be important; it is a prerequisite to achieve very long range capability. In earlier studies it was assumed that SCTs would only become possible by application of laminar flow [376]. But today, we request an SCT to be viable without application of laminar flow in order to maintain its competitiveness when laminar flow becomes available for subsonic and supersonic transports. By reducing fuel burned, laminar flow drag reduction reduces size and weight of the aircraft, or increases range capability -whereas otherwise size and weight would grow towards infinity. Transition mechanisms from laminar to turbulent state of the boundary layer flow (ALT, CFI, TSI) function as for transonic transports, but at more severe conditions: higher sweep angles, cooled surfaces; higher mode instabilities (HMI) must at least be taken into account, although they may not become important below Mach 3. Hitherto there is a worldwide lack of ground test facilities to investigate TSI at the expected cruise Mach numbers between 1.6 and 2.4; in Stuttgart, Germany one such facility -a Ludwieg tube- is still in the validation phase. A quiet Ludwieg tunnel could be a favourable choice for Europe. But it will require a new approach in designing aircraft which includes improved theoretical predictions, usage of classical wind tunnels for turbulent flow and flight tests for validation.},
  language  = {en}
}
@incollection{MertensBecker1989,
  author    = {Mertens, Josef and Becker, K.},
  title     = {Numerical solution of flow equations : an aircraft designer's view},
  series = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  booktitle = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  editor    = {Ballmann, Josef},
  publisher = {Vieweg},
  address   = {Braunschweig},
  isbn      = {3-528-08098-1},
  doi       = {10.1007/978-3-322-87869-4_41},
  pages     = {403 -- 412},
  year      = {1989},
  abstract  = {Today the most accurate and cost effective industrial codes used in aircraft design are based on the full potential equation coupled with boundary layer equations. However, these are not capable to solve complicated three-dimensional problems of vortical flows and shocks. On the other hand Euler and Navier-Stokes codes are too expensive and not accurate enough for design purposes, especially in regard of drag and interference prediction. The reasons for these deficiencies are investigated and a way to overcome them by future developments is demonstrated.},
  language  = {en}
}
@article{MertensKlevenhusenJakob1987,
  author    = {Mertens, Josef and Klevenhusen, K. D. and Jakob, H.},
  title     = {Accurate Transonic Wave Drag Prediction Using Simple Physical Models},
  series = {AIAA-Journal. 25 (1987), H. 6},
  journal   = {AIAA-Journal. 25 (1987), H. 6},
  isbn      = {0001-1452},
  pages     = {799 -- 805},
  year      = {1987},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Son of Concorde, a technology challenge},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_3},
  pages     = {31 -- 51},
  year      = {1997},
  abstract  = {Concorde (Figure 9) is the only supersonic airliner which has been introduced into regular passenger service. It is still in service at British Airways and Air France without any flight accidents, and probably will stay in service for at least for ten more years.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Aerodynamic multi point design challenge},
  series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_4},
  pages     = {53 -- 67},
  year      = {1997},
  abstract  = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.},
  language  = {en}
}
@article{MertensHenke2001,
  author    = {Mertens, Josef and Henke, Rolf},
  title     = {Adaptive technologies for future civil air transport},
  series = {Air \& Space Europe. 3 (2001), H. 3-4},
  journal   = {Air \& Space Europe. 3 (2001), H. 3-4},
  isbn      = {1247-5793},
  pages     = {80 -- 82},
  year      = {2001},
  language  = {en}
}
@inproceedings{Mertens2001,
  author    = {Mertens, Josef},
  title     = {Next steps envisaged to improve wing performance of commercial aircraft},
  series = {Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19-21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)},
  booktitle = {Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19-21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-41911-X (Print)},
  doi       = {10.1007/978-3-540-45359-8_26},
  pages     = {246 -- 255},
  year      = {2001},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Reduction of aerodynamic drag (RaWid)-Status after the first year of the program},
  series = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  booktitle = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-06960-0},
  doi       = {10.1007/978-3-322-86573-1_2},
  pages     = {7 -- 14},
  year      = {1997},
  abstract  = {The technology programme "Reduction of aerodynamic drag (RaWid)" for high speed aerodynamics at Daimler-Benz Aerospace Airbus is sponsered by the German ministry for education, research and technology since July 1, 1995. Connected to this industrial programme are the cooperation programmes "MEGAFLOW" under leadership of the DLR and "Transition" by the DFG, and several contributions by DLR and universities. The programme is oriented towards technologies required for a MEGALINER which gains momentum by the ambitious plans for a new large Airbus A3XX. In the first year new technological steps were undertaken in theory, design and experiment. Some critical steps were verified by wing designs checked in wind tunnel tests.},
  language  = {en}
}
@book{MertensVeldenKelmetal.2000,
  author    = {Mertens, Josef and Velden, Alexander van der and Kelm, Roland and Kokan, David},
  title     = {Application of MDO to large subsonic transport aircraft},
  publisher = {American Institute of Aeronautics and Astronautics},
  address   = {Reston, Va.},
  pages     = {12 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2000},
  language  = {en}
}
@misc{MertensLajain2002,
  author    = {Mertens, Josef and Lajain, Henri},
  title     = {Method of fabricating leading edge nose structures of aerodynamic surfaces : patent no.: US 6,415,510 B2 ; date of patent: Jul. 9, 2002},
  publisher = {United States Patent and Trademark Office},
  address   = {[Washington, DC]},
  pages     = {12 S. : Ill.},
  year      = {2002},
  language  = {en}
}
@article{Mertens1998,
  author    = {Mertens, Josef},
  title     = {Required technologies for supersonic aircraft},
  series = {Fluid dynamics research on supersonic aircraft : this report is a compilation of the edited proceedings of the special course on "Fluid dynamic research on supersonic aircraft" held at the Karman Institute for Fluid Dynamics (VKI) in Rhode-Saint-Genese, Belgium, 25-29 May 1998},
  journal   = {Fluid dynamics research on supersonic aircraft : this report is a compilation of the edited proceedings of the special course on "Fluid dynamic research on supersonic aircraft" held at the Karman Institute for Fluid Dynamics (VKI) in Rhode-Saint-Genese, Belgium, 25-29 May 1998},
  publisher = {Research and Technology Organization},
  address   = {Neuilly-sur-Seine},
  isbn      = {92-837-1007-X},
  pages     = {5.1 -- 5.16},
  year      = {1998},
  language  = {en}
}
@article{Mertens1998,
  author    = {Mertens, Josef},
  title     = {Multi point design challenges for supersonic transports},
  series = {Fluid dynamics research on supersonic aircraft : this report is a compilation of the edited proceedings of the special course on "Fluid dynamics research on supersonic aircraft" held at the Karman Institute for Fluid Dynamics (VKI) in Rhode-Saint-Genese, Belgium, 25-29 May 1998},
  journal   = {Fluid dynamics research on supersonic aircraft : this report is a compilation of the edited proceedings of the special course on "Fluid dynamics research on supersonic aircraft" held at the Karman Institute for Fluid Dynamics (VKI) in Rhode-Saint-Genese, Belgium, 25-29 May 1998},
  publisher = {Research and Technology Organization},
  address   = {Neuilly-sur-Seine},
  isbn      = {92-837-1007-X},
  pages     = {8.1 -- 8.12},
  year      = {1998},
  language  = {en}
}
@book{LeyWittmannHallmann2009,
  author    = {Ley, Wilfried and Wittmann, Klaus and Hallmann, Willi},
  title     = {Handbook of space technology},
  publisher = {Wiley},
  address   = {Chichester},
  isbn      = {978-0-470-69739-9},
  pages     = {XIII, 882 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {en}
}
@article{OverduinBlomeHoell2007,
  author    = {Overduin, James and Blome, Hans-Joachim and Hoell, Josef},
  title     = {Wolfgang Priester: from the big bounce to the Lambda-dominated universe},
  series = {Naturwissenschaften},
  volume    = {94},
  journal   = {Naturwissenschaften},
  number    = {6},
  isbn      = {0028-1042},
  pages     = {417 -- 429},
  year      = {2007},
  language  = {en}
}
@article{TrillaGrossenRobinsonetal.2008,
  author    = {Trilla, Joan and Grossen, J{\"u}rgen and Robinson, Alexander and Funke, Harald and Bosschaerts, Walter and Hendrick, Patrick},
  title     = {Development of a hydrogen combustion chamber for an ultra micro gas turbine},
  series = {PowerMEMS 2008, 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, microEMS 2008, 2nd Symposium on Micro Environmental Machine Systems, Sendai, JP, Nov 9-12, 2008},
  journal   = {PowerMEMS 2008, 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, microEMS 2008, 2nd Symposium on Micro Environmental Machine Systems, Sendai, JP, Nov 9-12, 2008},
  pages     = {101 -- 104},
  year      = {2008},
  language  = {en}
}
@article{RobinsonFunkeHendricketal.2008,
  author    = {Robinson, A. E. and Funke, Harald and Hendrick, P. and Recker, E. and Peirs, J.},
  title     = {Development of a hydrogen fuelled 1 kW ultra micro gas turbine with special respect to designing, testing and mapping of the µ-scale combustor},
  series = {IEEE International Conference on Sustainable Energy Technologies, 2008 : ICSET 2008 ; Singapore, 24 - 27 Nov. 2008.},
  journal   = {IEEE International Conference on Sustainable Energy Technologies, 2008 : ICSET 2008 ; Singapore, 24 - 27 Nov. 2008.},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-1887-9},
  pages     = {656 -- 660},
  year      = {2008},
  language  = {en}
}
@article{BlomeChiconeHehletal.2010,
  author    = {Blome, Hans-Joachim and Chicone, Carmen and Hehl, Friedrich W. and Mashhoon, Bahram},
  title     = {Nonlocal modification of Newtonian gravity},
  series = {Physical Review D},
  volume    = {81},
  journal   = {Physical Review D},
  number    = {6},
  isbn      = {0556-2821},
  pages     = {065020},
  year      = {2010},
  language  = {en}
}
@article{WilsonBlome2009,
  author    = {Wilson, T. L. and Blome, Hans-Joachim},
  title     = {The Pioneer anomaly and a rotating G{\"o}del universe},
  series = {Advances in Space Research},
  volume    = {44},
  journal   = {Advances in Space Research},
  number    = {11},
  isbn      = {0273-1177},
  pages     = {1345 -- 1353},
  year      = {2009},
  language  = {en}
}
@article{HavermannSalveTinetal.1994,
  author    = {Havermann, Marc and Salve, M. de and Tin, G. del and Panella, B.},
  title     = {Experimental Study of the Temperature Field along a Density Lock / Salve, M. de ; Tin, G. del ; Panella, B. ; Sansoldo, D. ; Havermann, M.},
  series = {Proceedings : International Conference on New Trends in Nuclear System Thermohydraulics, May 30th - June 2nd, 1994, Pisa / organized by Dipartimento di Costruzioni Meccaniche e Nucleari ... . Ed. by Francesco Oriolo},
  journal   = {Proceedings : International Conference on New Trends in Nuclear System Thermohydraulics, May 30th - June 2nd, 1994, Pisa / organized by Dipartimento di Costruzioni Meccaniche e Nucleari ... . Ed. by Francesco Oriolo},
  publisher = {-},
  address   = {Pisa},
  pages     = {623 -- 630},
  year      = {1994},
  language  = {en}
}
@article{HavermannBeylich1998,
  author    = {Havermann, Marc and Beylich, A. E.},
  title     = {Combined Measurement of Velocity, Temperature and Pressure in Compressible Gas Flows Using Laser-Induced Iodine Fluorescence / Havermann, M. ; Beylich, A. E.},
  publisher = {-},
  year      = {1998},
  language  = {en}
}
@article{HavermannSeilerGeorgeetal.2002,
  author    = {Havermann, Marc and Seiler, F. and George, A. and Leopold, F.},
  title     = {Enhanced Doppler Picture Velocimetry (DPV) for Planar Velocity Measurements in High-Speed Shock Tunnel Flow / Seiler, F. ; George, A. ; Leopold, F. ; Havermann, M. ; Srulijes, J.},
  series = {10th International Symposium on Flow Visualization : Kyōto, Japan, August 26 - 29, 2002 / sponsored by International Flow Visualization Society . [Chairman:] Toshio Kobayashi},
  journal   = {10th International Symposium on Flow Visualization : Kyōto, Japan, August 26 - 29, 2002 / sponsored by International Flow Visualization Society . [Chairman:] Toshio Kobayashi},
  publisher = {Visualization Society of Japan},
  address   = {Kyoto},
  isbn      = {4906497829},
  year      = {2002},
  language  = {en}
}
@article{LeyPlescherScholzetal.2007,
  author    = {Ley, Wilfried and Plescher, Engelbert and Scholz, Artur and Piepenbrock, Johannes},
  title     = {COMPASS-1 picosatellite project / Ley, Wilfried ; Plescher, Engelbert ; Scholz, Artur ; Piepenbrock, Johannes},
  series = {Small satellites for earth observation : digest of the 6th International symposium of the International Academy of Astronautics, Berlin, April 23 - 26, 2007 / ed. by Rainer Sandau; Hans-Peter R{\"o}ser; Arnoldo Valenzuela},
  journal   = {Small satellites for earth observation : digest of the 6th International symposium of the International Academy of Astronautics, Berlin, April 23 - 26, 2007 / ed. by Rainer Sandau; Hans-Peter R{\"o}ser; Arnoldo Valenzuela},
  publisher = {Wissenschaft und Technik Verl.},
  address   = {Berlin},
  isbn      = {9783896855718},
  pages     = {147 -- 150},
  year      = {2007},
  language  = {en}
}
@article{WittmannKehrWillnecker2000,
  author    = {Wittmann, Klaus and Kehr, J. and Willnecker, R.},
  title     = {Decentralized Payload Operations Concept for Columbus},
  year      = {2000},
  language  = {en}
}
@article{WittmannBibringRosenbaueretal.2007,
  author    = {Wittmann, Klaus and Bibring, J.-P. and Rosenbauer, H. and Boehnhardt, H.},
  title     = {The Rosetta Lander ("Philae") Investigations / Bibring, J.-P. ; Rosenbauer, H. ; Boehnhardt, H. ; [...] Wittmann, K.},
  series = {Space Science Reviews. 128 (2007), H. 1-4},
  journal   = {Space Science Reviews. 128 (2007), H. 1-4},
  isbn      = {0038-6308},
  pages     = {205 -- 220},
  year      = {2007},
  language  = {en}
}
@article{Wittmann2000,
  author    = {Wittmann, Klaus},
  title     = {Overview of Space Operations at DLR},
  year      = {2000},
  language  = {en}
}
@article{Mertens1992,
  author    = {Mertens, Josef},
  title     = {Laminar flow for supersonic transports},
  series = {Proceedings : March 16 - 18, 1992, Congress Centrum, Hamburg, Federal Republic of Germany / organized jointly by: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt e.V. ... [Programme committee J. Szodruch ...]},
  journal   = {Proceedings : March 16 - 18, 1992, Congress Centrum, Hamburg, Federal Republic of Germany / organized jointly by: Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt e.V. ... [Programme committee J. Szodruch ...]},
  publisher = {DGLR},
  address   = {Bonn},
  isbn      = {3-922010-73-3},
  pages     = {319 -- 323},
  year      = {1992},
  language  = {en}
}
@article{BohnFunke2003,
  author    = {Bohn, Dieter and Funke, Harald},
  title     = {Experimental investigations into the nonuniform flow in a 4-stage turbine with special focus on the flow equalization in the first turbine stage},
  series = {ASME TURBO EXPO, Proceedings of the ASME Turbo Expo, 2003},
  journal   = {ASME TURBO EXPO, Proceedings of the ASME Turbo Expo, 2003},
  isbn      = {0-7918-3689-4},
  pages     = {281 -- 289},
  year      = {2003},
  language  = {en}
}
@article{Gerhardt2005,
  author    = {Gerhardt, Hans Joachim},
  title     = {Design methods of smoke and heat exhaust systems in construction works},
  series = {V Mie\&\#796;dzynarodowa Konferencja Bezpiecze\&\#324;stwo Po\&\#380;arowe Budowli, Warszawa-Miedzeszyn, 14 - 16 listopada 2005 r. = : Vth International Conference Fire Safety of Buildings / ITB ... [Ed. Miros\&\#322;aw Kosiorek]},
  journal   = {V Mie\&\#796;dzynarodowa Konferencja Bezpiecze\&\#324;stwo Po\&\#380;arowe Budowli, Warszawa-Miedzeszyn, 14 - 16 listopada 2005 r. = : Vth International Conference Fire Safety of Buildings / ITB ... [Ed. Miros\&\#322;aw Kosiorek]},
  publisher = {ITB},
  address   = {Warszawa},
  isbn      = {83-7413-810-6},
  pages     = {127 -- 140},
  year      = {2005},
  language  = {en}
}
@article{GerhardtKonrathLieb2005,
  author    = {Gerhardt, Hans Joachim and Konrath, B. and Lieb, R.-D.},
  title     = {Das Drallrohr},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik. 56 (2005), H. 11},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik. 56 (2005), H. 11},
  isbn      = {1436-5103},
  pages     = {91 -- 95},
  year      = {2005},
  language  = {en}
}
@article{GerhardtKrueger1997,
  author    = {Gerhardt, Hans Joachim and Kr{\"u}ger, O.},
  title     = {Building shape influence on local wind loads},
  series = {Proceedings of the 2nd European \& African Conference on Wind Engineering : 2 EACWE, Palazzo Ducale, Genova, Italy, June 22-26, 1997 / ed. by Giovanni Solari. - Vol. 2},
  journal   = {Proceedings of the 2nd European \& African Conference on Wind Engineering : 2 EACWE, Palazzo Ducale, Genova, Italy, June 22-26, 1997 / ed. by Giovanni Solari. - Vol. 2},
  publisher = {Servizi Grafici Editoriali},
  address   = {Padova},
  isbn      = {88-86281-19-6},
  pages     = {XIX, S. 1017 - 1998 : Ill., graph. Darst.},
  year      = {1997},
  language  = {en}
}
@incollection{FunkeBoernerHendricketal.2011,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E.},
  title     = {Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine},
  series = {Progress in Propulsion Physics. Vol. 2},
  booktitle = {Progress in Propulsion Physics. Vol. 2},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  isbn      = {978-2-7598-0673-7},
  pages     = {475 -- 486},
  year      = {2011},
  language  = {en}
}
@inproceedings{SpohrSchirraHoeflingetal.2013,
  author    = {Spohr, A. and Schirra, Julian and Hoefling, J. and Schedl, A.},
  title     = {Wing weight estimation methodology for highly non-planar lifting systems during conceptual design},
  series = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart},
  organization    = {Deutscher Luft- und Raumfahrtkongress <62, 2013, Stuttgart>},
  pages     = {Publ. online},
  year      = {2013},
  language  = {en}
}
@inproceedings{HoeflingSchirraSpohretal.2013,
  author    = {Hoefling, J. and Schirra, Julian and Spohr, A. and Sch{\"a}fer, D.},
  title     = {Induced drag computation with wake model schemes for highly non-planar wing systems},
  series = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart},
  publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  organization    = {Deutscher Luft- und Raumfahrtkongress <62, 2013, Stuttgart>},
  pages     = {1 -- 10},
  year      = {2013},
  language  = {en}
}
@article{FunkeDickhoffKeinzetal.2014,
  author    = {Funke, Harald and Dickhoff, J. and Keinz, Jan and Anis, H. A. and Parente, A. and Hendrick, P.},
  title     = {Experimental and numerical study of the micromix combustion principle applied for hydrogen and hydrogen-rich syngas as fuel with increased energy density for industrial gas turbine applications},
  series = {Energy procedia},
  journal   = {Energy procedia},
  number    = {61},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal)},
  doi       = {10.1016/j.egypro.2014.12.201},
  pages     = {1736 -- 1739},
  year      = {2014},
  abstract  = {The Dry Low NOx (DLN) Micromix combustion principle with increased energy density is adapted for the industrial gas turbine APU GTCP 36-300 using hydrogen and hydrogen-rich syngas with a composition of 90\%-Vol. hydrogen (H₂) and 10\%-Vol. carbon-monoxide (CO). Experimental and numerical studies of several combustor geometries for hydrogen and syngas show the successful advance of the DLN Micromix combustion from pure hydrogen to hydrogen-rich syngas. The impact of the different fuel properties on the combustion principle and aerodynamic flame stabilization design laws, flow field, flame structure and emission characteristics is investigated by numerical analysis using a hybrid Eddy Break Up combustion model and validated against experimental results.},
  language  = {en}
}
@article{SchirraWatmuffBauschat2014,
  author    = {Schirra, Julian and Watmuff, Jonathan and Bauschat, J.-Michael},
  title     = {Highly non-planar lifting systems: a relative assessment of existing potential-methodologies to accurately estimate the induced drag},
  series = {32nd AIAA Applied Aerodynamics Conference 2014 : June, 16-20 2014, Atlanta, Ga.},
  journal   = {32nd AIAA Applied Aerodynamics Conference 2014 : June, 16-20 2014, Atlanta, Ga.},
  organization    = {American Institute of Aeronautics and Astronautics},
  isbn      = {978-1-62410-288-2},
  doi       = {10.2514/6.2014-2988},
  pages     = {Publ. online},
  year      = {2014},
  language  = {en}
}
@inproceedings{FunkeKeinzBoerneretal.2013,
  author    = {Funke, Harald and Keinz, Jan and B{\"o}rner, Sebastian and Haj Ayed, A. and Kusterer, K. and Tekin, N. and Kazari, M. and Kitajima, J. and Horikawa, A. and Okada, K.},
  title     = {Experimental and numerical characterization of the dry low NOx micromix hydrogen combustion principle at increased energy density for industrial hydrogen gas turbine applications},
  series = {Combustion, fuels and emissions : proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2013 ; June 3 - 7, 2013, San Antonio, Texas, USA ; vol. 1},
  booktitle = {Combustion, fuels and emissions : proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2013 ; June 3 - 7, 2013, San Antonio, Texas, USA ; vol. 1},
  editor    = {Song, Seung Jin},
  publisher = {ASME},
  address   = {New York, NY},
  organization    = {American Society of Mechanical Engineers},
  isbn      = {978-0-7918-5510-2},
  pages     = {V001T04A055},
  year      = {2013},
  language  = {en}
}
@inproceedings{SchirraJ2013,
  author    = {Schirra, Julian and J., Watmuff},
  title     = {Euler-based induced drag estimation for highly non-planar lifting systems during conceptional design},
  series = {62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft},
  booktitle = {62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  organization    = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth},
  pages     = {1 -- 8},
  year      = {2013},
  language  = {en}
}
@phdthesis{Boerner2013,
  author    = {B{\"o}rner, Sebastian},
  title     = {Optimization and testing of a low NOx hydrogen fuelled gas turbine},
  publisher = {Universit{\´e} Libre de Bruxelles},
  address   = {Bruxelles},
  pages     = {XVI, 144 S.},
  year      = {2013},
  language  = {en}
}
@inproceedings{FunkeKeinzKustereretal.2015,
  author    = {Funke, Harald and Keinz, Jan and Kusterer, K. and Haj Ayed, A. and Kazari, M. and Kitajima, J. and Horikawa, A. and Okada, K.},
  title     = {Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications},
  series = {ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15-19, 2015},
  booktitle = {ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15-19, 2015},
  isbn      = {978-0-7918-5668-0},
  doi       = {10.1115/GT2015-42043},
  pages     = {V04AT04A008},
  year      = {2015},
  language  = {en}
}
@article{HajAyedKustererFunkeetal.2015,
  author    = {Haj Ayed, A. and Kusterer, K. and Funke, Harald and Keinz, Jan and Striegan, Constantin and Bohn, D.},
  title     = {Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine},
  series = {Propulsion and power research},
  volume    = {Vol. 4},
  journal   = {Propulsion and power research},
  number    = {Iss. 3},
  issn      = {2212-540X},
  doi       = {10.1016/j.jppr.2015.07.005},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{HajAyedKustererFunkeetal.2015,
  author    = {Haj Ayed, A. and Kusterer, K. and Funke, Harald and Keinz, Jan and Striegan, Constantin and Bohn, D.},
  title     = {Improvement study for the dry-low-NOx hydrogen micromix combustion technology},
  series = {Propulsion and power research},
  volume    = {Vol. 4},
  journal   = {Propulsion and power research},
  number    = {Iss. 3},
  issn      = {2212-540X},
  doi       = {10.1016/j.jppr.2015.07.003},
  pages     = {132 -- 140},
  year      = {2015},
  language  = {en}
}
@inproceedings{NeuJanserKhatibietal.2015,
  author    = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.},
  title     = {Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors},
  series = {6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain},
  booktitle = {6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain},
  doi       = {10.13140/RG.2.1.3753.0324},
  pages     = {10 S.},
  year      = {2015},
  language  = {en}
}
@article{BindalSharmaJanseretal.2013,
  author    = {Bindal, Gaurav and Sharma, Sparsh and Janser, Frank and Neu, Eugen},
  title     = {Detailed analysis of variables affecting wing kinematics of bat flight},
  series = {SAE International Journal of Aerospace},
  volume    = {6},
  journal   = {SAE International Journal of Aerospace},
  number    = {2},
  issn      = {1946-3901},
  doi       = {10.4271/2013-01-9003},
  pages     = {811 -- 818},
  year      = {2013},
  language  = {en}
}
@inproceedings{HorikawaOkadaKazarietal.2015,
  author    = {Horikawa, Atsushi and Okada, Kunio and Kazari, Masahide and Funke, Harald and Keinz, Jan and Kusterer, Karsten and Haj Ayed, Anis},
  title     = {Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design},
  series = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  isbn      = {978-4-89111-008-6},
  pages     = {141 -- 146},
  year      = {2015},
  language  = {en}
}
@inproceedings{FunkeKeinzHajAyedetal.2015,
  author    = {Funke, Harald and Keinz, Jan and Haj Ayed, A. and Kazari, M. and Kitajima, J. and Horikawa, A. and Okada, K.},
  title     = {Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine},
  series = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  isbn      = {978-4-89111-008-6},
  pages     = {131 -- 140},
  year      = {2015},
  language  = {en}
}
@incollection{WolffSeefeldtBaueretal.2014,
  author    = {Wolff, Nino and Seefeldt, Patric and Bauer, Wolfgang and Fiebig, Christopher and Gerding, Patrick and Parow-Souchon, Kai and Pongs, Anna and Reiffenrath, Matti and Ziemann, Thomas},
  title     = {Alternative application of solar sail technology},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  doi       = {10.1007/978-3-642-34907-2_23},
  pages     = {351 -- 365},
  year      = {2014},
  abstract  = {The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.},
  language  = {en}
}
@inproceedings{SchirraWatmuffBauschat2014,
  author    = {Schirra, Julian and Watmuff, Jon and Bauschat, J.-Michael},
  title     = {A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems},
  series = {Advanced aero concepts, design and operations : Applied Aerodynamics Conference : July 22 -24, 2014, Bristol, UK},
  booktitle = {Advanced aero concepts, design and operations : Applied Aerodynamics Conference : July 22 -24, 2014, Bristol, UK},
  organization    = {Applied Aerodynamics Conference <2014, Bristol>},
  pages     = {1 -- 13},
  year      = {2014},
  language  = {en}
}
@article{StadlerGarveyEmbsetal.2014,
  author    = {Stadler, Alexander Maximilian and Garvey, Christopher J. and Embs, Jan Peter and Koza, Michael Marek and Unruh, Tobias and Artmann, Gerhard and Zaccai, Guiseppe},
  title     = {Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study},
  series = {Biochimica et biophysica acta (BBA): General Subjects},
  volume    = {1840},
  journal   = {Biochimica et biophysica acta (BBA): General Subjects},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-8006 (E-Journal); 0304-4165 (Print)},
  doi       = {10.1016/j.bbagen.2014.06.007},
  pages     = {2989 -- 2999},
  year      = {2014},
  language  = {en}
}
@book{BenkoePlescher2013,
  author    = {Benk{\"o}, Marietta and Plescher, Engelbert},
  title     = {Space law: reconsidering the definition/delimitation question and the passage of spacecraft through foreign airspace. (Essential air and space law ; 12)},
  publisher = {Eleven International Publishing},
  address   = {The Hague},
  isbn      = {9789462360761 ; 9462360766 ; 9789460948176},
  pages     = {VII, 159 S.},
  year      = {2013},
  language  = {en}
}
@inproceedings{PlescherMathiakWillnecker2005,
  author    = {Plescher, Engelbert and Mathiak, Gerhard and Willnecker, Rainer},
  title     = {Technical aspects of liquid diffusion model experiments},
  series = {55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04},
  booktitle = {55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04},
  publisher = {International Astronautical Federation},
  address   = {Paris},
  organization    = {International Astronautical Congress <55, 2004, Vancouver>},
  pages     = {5019 -- 5025},
  year      = {2005},
  language  = {en}
}
@article{MathiakPlescherWillnecker2005,
  author    = {Mathiak, Gerhard and Plescher, Engelbert and Willnecker, Rainer},
  title     = {Liquid metal diffusion experiments in microgravity - Vibrational effects},
  series = {Measurement science and technology},
  volume    = {Vol. 16},
  journal   = {Measurement science and technology},
  number    = {No. 2},
  issn      = {0957-0233},
  doi       = {10.1088/0957-0233/16/2/003},
  pages     = {336},
  year      = {2005},
  language  = {en}
}
@article{MathiakWillneckerPlescher2005,
  author    = {Mathiak, Gerhard and Willnecker, Rainer and Plescher, Engelbert},
  title     = {Vibrational effects on diffusion experiments},
  series = {Microgravity science and technology : international journal for microgravity research and applications},
  volume    = {Vol. 15},
  journal   = {Microgravity science and technology : international journal for microgravity research and applications},
  number    = {No. 1},
  issn      = {0938-0108},
  pages     = {295 -- 300},
  year      = {2005},
  language  = {en}
}
@inproceedings{RoosenFeyerl2015,
  author    = {Roosen, Petra and Feyerl, G{\"u}nter},
  title     = {Gender-specific perception and utilization of personal use vehicles},
  series = {FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1},
  booktitle = {FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-5108-0209-4},
  pages     = {418 -- 425},
  year      = {2015},
  language  = {en}
}
@inproceedings{HorikawaKazariOkadaetal.2015,
  author    = {Horikawa, Atsushi and Kazari, Masahide and Okada, Kunio and Funke, Harald and Keinz, Jan and Kusterer, Karsten and Haji Ayed, Anis},
  title     = {Developments of Hydrogen Dry Low Emission Combustion Technology},
  series = {Annual Congress of Gas Turbine Society Japan, 2015},
  booktitle = {Annual Congress of Gas Turbine Society Japan, 2015},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@article{FunkeBeckmann2022,
  author    = {Funke, Harald and Beckmann, Nils},
  title     = {Flexible fuel operation of a Dry-Low-NOx Micromix Combustor with Variable Hydrogen Methane Mixture},
  series = {International Journal of Gas Turbine, Propulsion and Power Systems},
  volume    = {13},
  journal   = {International Journal of Gas Turbine, Propulsion and Power Systems},
  number    = {2},
  issn      = {1882-5079},
  pages     = {1 -- 7},
  year      = {2022},
  abstract  = {The role of hydrogen (H2) as a carbon-free energy carrier is discussed since decades for reducing greenhouse gas emissions. As bridge technology towards a hydrogen-based energy supply, fuel mixtures of natural gas or methane (CH4) and hydrogen are possible. The paper presents the first test results of a low-emission Micromix combustor designed for flexible-fuel operation with variable H2/CH4 mixtures. The numerical and experimental approach for considering variable fuel mixtures instead of recently investigated pure hydrogen is described. In the experimental studies, a first generation FuelFlex Micromix combustor geometry is tested at atmospheric pressure at gas turbine operating conditions corresponding to part- and full-load. The H2/CH4 fuel mixture composition is varied between 57 and 100 vol.\% hydrogen content. Despite the challenges flexible-fuel operation poses onto the design of a combustion system, the evaluated FuelFlex Micromix prototype shows a significant low NOx performance},
  language  = {en}
}
@article{BergmannMoehrenBraunetal.2023,
  author    = {Bergmann, Ole and M{\"o}hren, Felix and Braun, Carsten and Janser, Frank},
  title     = {On the influence of elasticity on swept propeller noise},
  series = {AIAA SCITECH 2023 Forum},
  journal   = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2023-0210},
  year      = {2023},
  abstract  = {High aerodynamic efficiency requires propellers with high aspect ratios, while propeller sweep potentially reduces noise. Propeller sweep and high aspect ratios increase elasticity and coupling of structural mechanics and aerodynamics, affecting the propeller performance and noise. Therefore, this paper analyzes the influence of elasticity on forward-swept, backward-swept, and unswept propellers in hover conditions. A reduced-order blade element momentum approach is coupled with a one-dimensional Timoshenko beam theory and Farassat's formulation 1A. The results of the aeroelastic simulation are used as input for the aeroacoustic calculation. The analysis shows that elasticity influences noise radiation because thickness and loading noise respond differently to deformations. In the case of the backward-swept propeller, the location of the maximum sound pressure level shifts forward by 0.5 °, while in the case of the forward-swept propeller, it shifts backward by 0.5 °. Therefore, aeroacoustic optimization requires the consideration of propeller deformation.},
  language  = {en}
}
@inproceedings{FunkeBeckmann2019,
  author    = {Funke, Harald and Beckmann, Nils},
  title     = {Flexible Fuel Operation of a Dry-Low-Nox Micromix Combustor with Variable Hydrogen Methane Mixtures},
  series = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan},
  isbn      = {978-4-89111-010-9},
  year      = {2019},
  language  = {en}
}
@inproceedings{FunkeBeckmannKeinzetal.2021,
  author    = {Funke, Harald and Beckmann, Nils and Keinz, Jan and Horikawa, Atsushi},
  title     = {30 years of dry low NOx micromix combustor research for hydrogen-rich fuels: an overview of past and present activities},
  series = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 4B: Combustion, Fuels, and Emissions},
  booktitle = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 4B: Combustion, Fuels, and Emissions},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-8413-3},
  doi       = {10.1115/GT2020-16328},
  pages     = {14 Seiten},
  year      = {2021},
  abstract  = {The paper presents an overview of the past and present of low-emission combustor research with hydrogen-rich fuels at Aachen University of Applied Sciences. In 1990, AcUAS started developing the Dry-Low-NOx Micromix combustion technology. Micromix reduces NOx emissions using jet-in-crossflow mixing of multiple miniaturized fuel jets and combustor air with an inherent safety against flashback. At first, pure hydrogen as fuel was investigated with lab-scale applications. Later, Micromix prototypes were developed for the use in an industrial gas turbine Honeywell/Garrett GTCP-36-300, proving low NOx characteristics during real gas turbine operation, accompanied by the successful definition of safety laws and control system modifications. Further, the Micromix was optimized for the use in annular and can combustors as well as for fuel-flexibility with hydrogen-methane-mixtures and hydrogen-rich syngas qualities by means of extensive experimental and numerical simulations. In 2020, the latest Micromix application will be demonstrated in a commercial 2 MW-class gas turbine can-combustor with full-scale engine operation. The paper discusses the advances in Micromix research over the last three decades.},
  language  = {en}
}
@inproceedings{ReimerBraunBallmann2006,
  author    = {Reimer, Lars and Braun, Carsten and Ballmann, Josef},
  title     = {Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation},
  series = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  booktitle = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences},
  publisher = {Optimage},
  address   = {Edinburgh},
  organization    = {International Council of the Aeronautical Sciences (ICAS)},
  isbn      = {0-9533991-7-6},
  pages     = {Paper No. 2006-10.3.3},
  year      = {2006},
  language  = {en}
}
@article{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple near-earth asteroid rendezvous mission: Solar-sailing options},
  series = {Advances in Space Research},
  journal   = {Advances in Space Research},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2017.10.017},
  year      = {2017},
  language  = {en}
}
@inproceedings{LoebSchartnerDachwaldetal.2007,
  author    = {Loeb, Horst Wolfgang and Schartner, Karl-Heinz and Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {SEP-Sample return from a main belt asteroid},
  series = {30th International Electric Propulsion Conference},
  booktitle = {30th International Electric Propulsion Conference},
  pages     = {1 -- 11},
  year      = {2007},
  abstract  = {By DLR-contact, sample return missions to the large main-belt asteroid "19, Fortuna" have been studied. The mission scenario has been based on three ion thrusters of the RIT-22 model, which is presently under space qualification, and on solar arrays equipped with triple-junction GaAs solar cells. After having designed the spacecraft, the orbit-to-orbit trajectories for both, a one-way SEP mission with a chemical sample return and an all-SEP return mission, have been optimized using a combination of artificial neural networks with evolutionary algorithms. Additionally, body-to-body trajectories have been investigated within a launch period between 2012 and 2015. For orbit-to-orbit calculation, the launch masses of the hybrid mission and of the all-SEP mission resulted in 2.05 tons and 1.56 tons, respectively, including a scientific payload of 246 kg. For the related transfer durations 4.14 yrs and 4.62 yrs were obtained. Finally, a comparison between the mission scenarios based on SEP and on NEP have been carried out favouring clearly SEP.},
  language  = {en}
}
@article{DachwaldSeboldtLoebetal.2008,
  author    = {Dachwald, Bernd and Seboldt, Wolfgang and Loeb, H. W. and Schartner, Karl-Heinz},
  title     = {Main Belt Asteroid Sample Return Mission Using Solar Electric Propulsion},
  series = {Acta Astronautica. 63 (2008), H. 1-4},
  journal   = {Acta Astronautica. 63 (2008), H. 1-4},
  isbn      = {0094-5765},
  pages     = {91 -- 101},
  year      = {2008},
  language  = {en}
}
@article{KezerashviliDachwald2021,
  author    = {Kezerashvili, Roman Ya and Dachwald, Bernd},
  title     = {Preface: Solar sailing: Concepts, technology, and missions II},
  series = {Advances in Space Research},
  volume    = {67},
  journal   = {Advances in Space Research},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2021.01.037},
  pages     = {2559 -- 2560},
  year      = {2021},
  language  = {en}
}
@inproceedings{DachwaldOhndorfSpurmannetal.2009,
  author    = {Dachwald, Bernd and Ohndorf, Andreas and Spurmann, J. and Loeb, H. W. and Schartner, Karl-Heinz and Seboldt, Wolfgang},
  title     = {Mission design for a SEP mission to saturn},
  series = {60th International Astronautical Congress 2009 (IAC 2009)},
  booktitle = {60th International Astronautical Congress 2009 (IAC 2009)},
  publisher = {Curran Associates, Inc.},
  address   = {Red Hook, NY},
  isbn      = {978-1-61567-908-9},
  pages     = {11 Seiten},
  year      = {2009},
  abstract  = {Within ESA's Cosmic Vision 2015-2025 plan, a mission to explore the Saturnian System, with special emphasis on its two moons Titan and Enceladus, was selected for study, termed TANDEM (Titan and Enceladus Mission). In this paper, we describe an optimized mission design for a TANDEM-derived solar electric propulsion (SEP) mission. We have chosen the SEP mission scenario for the interplanetary transfer of the TANDEM spacecraft because all feasible gravity assist sequences for a chemical transfer between 2015 and 2025 result in long flight times of about nine years. Our SEP system is based on the German RIT ion engine. For our optimized mission design, we have extensively explored the SEP parameter space (specific impulse, thrust level, power level) and have calculated an optimal interplanetary trajectory for each setting. In contrast to the original TANDEM mission concept, which intends to use two launch vehicles and an all-chemical transfer, our SEP mission design requires only a single Ariane 5 ECA launch for the same payload mass. Without gravity assist, it yields a faster and more flexible transfer with a fight time of less than seven years, and an increased payload ratio. Our mission design proves thereby the capability of SEP even for missions into the outer solar system.},
  language  = {en}
}
@misc{MachadoDahmannKeimeretal.2020,
  author    = {Machado, Patricia Almeida and Dahmann, Peter and Keimer, Jona and Saretzki, Charlotte and St{\"u}bing, Felix and K{\"u}pper, Thomas},
  title     = {Stress profile and individual workload monitoring in general aviation pilots - an experiment's setting},
  series = {23. Annual Meeting of the German Society of Travel Medicine, Coburg, 18.-19.9.2020},
  journal   = {23. Annual Meeting of the German Society of Travel Medicine, Coburg, 18.-19.9.2020},
  doi       = {10.55225/hppa.156},
  year      = {2020},
  language  = {en}
}
@inproceedings{FunkeBeckmannAbanteriba2017,
  author    = {Funke, Harald and Beckmann, Nils and Abanteriba, Sylvester},
  title     = {A comparison of complex chemistry mechanisms for hydrogen methane blends based on the Sandia / Sydney Bluff-Body Flame HM1},
  series = {Proceedings of the Eleventh Asia-Pacific Conference on Combustion (ASPACC 2017), New South Wales, Australia, 10-14 December 2017},
  booktitle = {Proceedings of the Eleventh Asia-Pacific Conference on Combustion (ASPACC 2017), New South Wales, Australia, 10-14 December 2017},
  isbn      = {978-1-5108-5646-2},
  pages     = {262 -- 265},
  year      = {2017},
  language  = {en}
}
@article{SpietzSproewitzSeefeldtetal.2021,
  author    = {Spietz, Peter and Spr{\"o}witz, Tom and Seefeldt, Patric and Grundmann, Jan Thimo and Jahnke, Rico and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Reershemius, Siebo and Renger, Thomas and Ruffer, Michael and Sasaki, Kaname and Sznajder, Maciej and T{\´o}th, Norbert and Ceriotti, Matteo and Dachwald, Bernd and Macdonald, Malcolm and McInnes, Colin and Seboldt, Wolfgang and Quantius, Dominik and Bauer, Waldemar and Wiedemann, Carsten and Grimm, Christian D. and Hercik, David and Ho, Tra-Mi and Lange, Caroline and Schmitz, Nicole},
  title     = {Paths not taken - The Gossamer roadmap's other options},
  series = {Advances in Space Research},
  volume    = {67},
  journal   = {Advances in Space Research},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2021.01.044},
  pages     = {2912 -- 2956},
  year      = {2021},
  language  = {en}
}
@inproceedings{DachwaldWurm2009,
  author    = {Dachwald, Bernd and Wurm, P.},
  title     = {Design concept and modeling of an advanced solar photon thruster},
  series = {Advances in the Astronautical Sciences},
  booktitle = {Advances in the Astronautical Sciences},
  publisher = {American Astronautical Society},
  address   = {San Diego, Calif.},
  isbn      = {978-087703554-1},
  issn      = {00653438},
  pages     = {723 -- 740},
  year      = {2009},
  abstract  = {The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.},
  language  = {en}
}
@article{DachwaldBaturkinCoverstoneetal.2006,
  author    = {Dachwald, Bernd and Baturkin, Volodymyr and Coverstone, Victoria L. and Dietrich, Benjamin and Garbe, Gregory P. and G{\"o}rlich, Marianne and Leipold, Manfred and Lura, Franz and Macdonald, Malcolm and McInnes, Colin R. and Mengali, Giovanni and Quatra, Alessandro A. and Rios-Reyes, Leonel and Scheeres, Daniel J. and Seboldt, Wolfgang and Wie, Bong},
  title     = {Potential Effects of Optical Solar Sail Degradation on Interplanetary Trajectory Design},
  series = {Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)},
  journal   = {Astrodynamics 2005 : proceedings of the AAS/AIAA astrodynamics conference held August 7 - 11, 2005, South Lake Tahoe, California / ed. by Bobby G. Williams. - Pt. 3. - (Advances in the astronautical sciences ; 123,3)},
  publisher = {Univelt},
  address   = {San Diego, Calif.},
  isbn      = {0-87703-527-X},
  pages     = {2569 -- 2592},
  year      = {2006},
  language  = {en}
}
@article{DachwaldSeboldtRichter2006,
  author    = {Dachwald, Bernd and Seboldt, Wolfgang and Richter, L.},
  title     = {Multiple rendezvous and sample return missions to near-Earth objects using solar sailcraft / Dachwald, B. ; Seboldt, W. ; Richter, L.},
  series = {Acta Astronautica. 59 (2006), H. 8-11},
  journal   = {Acta Astronautica. 59 (2006), H. 8-11},
  isbn      = {0094-5765},
  pages     = {768 -- 776},
  year      = {2006},
  language  = {en}
}
@inproceedings{GrundmannBieleDachwaldetal.2017,
  author    = {Grundmann, Jan Thimo and Biele, Jens and Dachwald, Bernd and Grimm, Christian D. and Lange, Caroline and Ulamec, Stephan and Ziach, Christian and Spr{\"o}witz, Tom and Ruffer, Michael and Seefeldt, Patric and Spietz, Peter and Toth, Norbert and Mimasu, Yuya and Rittweger, Andreas and Bibring, Jean-Pierre and Braukhane, Andy and Boden, Ralf Christian and Dumont, Etienne and Jahnke, Stephan Siegfried and Jetzschmann, Michael and Kr{\"u}ger, Hans and Lange, Michael and Gomez, Antonio Martelo and Massonett, Didier and Okada, Tatsuaki and Sagliano, Marco and Sasaki, Kaname and Schr{\"o}der, Silvio and Sippel, Martin and Skoczylas, Thomas and Wejmo, Elisabet},
  title     = {Small landers and separable sub-spacecraft for near-term solar sails},
  series = {The Fourth International Symposium on Solar Sailing 2017},
  booktitle = {The Fourth International Symposium on Solar Sailing 2017},
  pages     = {1 -- 10},
  year      = {2017},
  abstract  = {Following the successful PHILAE landing with ESA's ROSETTA probe and the launch of the MINERVA rovers and the Mobile Asteroid Surface Scout, MASCOT, aboard the JAXA space probe, HAYABUSA2, to asteroid (162173) Ryugu, small landers have found increasing interest. Integrated at the instrument level in their mothership they support small solar system body studies. With efficient capabilities, resource-friendly design and inherent robustness they are an attractive exploration mission element. We discuss advantages and constraints of small sub-spacecraft, focusing on emerging areas of activity such as asteroid diversity studies, planetary defence, and asteroid mining, on the background of our projects PHILAE, MASCOT, MASCOT2, the JAXA-DLR Solar Power Sail Lander Design Study, and others. The GOSSAMER-1 solar sail deployment concept also involves independent separable sub-spacecraft operating synchronized to deploy the sail. Small spacecraft require big changes in the way we do things and occasionally a little more effort than would be anticipated based on a traditional large spacecraft approach. In a Constraints-Driven Engineering environment we apply Concurrent Design and Engineering (CD/CE), Concurrent Assembly, Integration and Verification (CAIV) and Model-Based Systems Engineering (MBSE). Near-term solar sails will likely be small spacecraft which we expect to harmonize well with nano-scale separable instrument payload packages.},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf and Ceriotti, Matteo and Chand, Suditi and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Heiligers, Jeannette and Herč{\´i}k, David and H{\´e}rique, Alain and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin and Meß, Jan-Gerd and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettemeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and T{\´o}th, Norbert and Vergaaij, Merel and Viavattene, Giulia and Wejmo, Elisabet and Wiedemann, Carsten and Wolff, Friederike and Ziach, Christian},
  title     = {Flights are ten a sail - Re-use and commonality in the design and system engineering of small spacecraft solar sail missions with modular hardware for responsive and adaptive exploration},
  series = {70th International Astronautical Congress (IAC)},
  booktitle = {70th International Astronautical Congress (IAC)},
  isbn      = {9781713814856},
  pages     = {1 -- 7},
  year      = {2019},
  language  = {en}
}
@incollection{ReimerWellmerBraunetal.2009,
  author    = {Reimer, Lars and Wellmer, Georg and Braun, Carsten and Ballmann, Josef},
  title     = {Computational methods for aero-structural analysis and optimisation of aircrafts based on reduced-order structural models},
  series = {MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107},
  booktitle = {MEGADESIGN and MegaOpt - German initiatives for aerodynamic simulation and optimization in aircraft design. Results of the closing symposium of the MEGADESIGN and MegaOpt projects, Braunschweig, Germany, 23 - 24 May, 2007 / Norbert Kroll ... (Eds.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 107},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-04092-4},
  pages     = {135 -- 150},
  year      = {2009},
  abstract  = {In this part of the MEGADESIGN project, aeroelastic effects are introduced into the aerodynamic analysis of aircrafts by coupling DLR's flow solvers TAU and FLOWer to a Timoshenko-beam solver. The emerging aeroelastic solvers and a method for the automatic identification of Timoshenko-beam models for wing-box structures were integrated into a simulation environment enabling the combined optimisation of aerodynamic wing shape and structure.},
  language  = {en}
}