@inproceedings{AhmedSchlenkhoffBung2011,
  author    = {Ahmed, H. and Schlenkhoff, A. and Bung, Daniel B.},
  title     = {Hydrodynamic characteristics of vertical slotted wall breakwaters},
  series = {Balance and uncertainty - water in a changing world : proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia},
  booktitle = {Balance and uncertainty - water in a changing world : proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {978-0-85825-868-6},
  pages     = {1179 -- 1186},
  year      = {2011},
  language  = {en}
}
@inproceedings{BlankeSchmidtGoettscheetal.2022,
  author    = {Blanke, Tobias and Schmidt, Katharina S. and G{\"o}ttsche, Joachim and D{\"o}ring, Bernd and Frisch, J{\´e}r{\^o}me and van Treeck, Christoph},
  title     = {Time series aggregation for energy system design: review and extension of modelling seasonal storages},
  series = {Energy Informatics},
  volume    = {5},
  booktitle = {Energy Informatics},
  number    = {1, Article number: 17},
  editor    = {Weidlich, Anke and Neumann, Dirk and Gust, Gunther and Staudt, Philipp and Sch{\"a}fer, Mirko},
  publisher = {Springer Nature},
  issn      = {2520-8942},
  doi       = {10.1186/s42162-022-00208-5},
  pages     = {1 -- 14},
  year      = {2022},
  abstract  = {Using optimization to design a renewable energy system has become a computationally demanding task as the high temporal fluctuations of demand and supply arise within the considered time series. The aggregation of typical operation periods has become a popular method to reduce effort. These operation periods are modelled independently and cannot interact in most cases. Consequently, seasonal storage is not reproducible. This inability can lead to a significant error, especially for energy systems with a high share of fluctuating renewable energy. The previous paper, "Time series aggregation for energy system design: Modeling seasonal storage", has developed a seasonal storage model to address this issue. Simultaneously, the paper "Optimal design of multi-energy systems with seasonal storage" has developed a different approach. This paper aims to review these models and extend the first model. The extension is a mathematical reformulation to decrease the number of variables and constraints. Furthermore, it aims to reduce the calculation time while achieving the same results.},
  language  = {en}
}
@inproceedings{Bung2011,
  author    = {Bung, Daniel B.},
  title     = {Non-intrusive measuring of air-water flow properties in self-aerated stepped spillway flow},
  series = {Balance and uncertainty - water in a changing world : proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia},
  booktitle = {Balance and uncertainty - water in a changing world : proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {978-0-85825-868-6},
  pages     = {2380 -- 2387},
  year      = {2011},
  language  = {en}
}
@inproceedings{Bung2010,
  author    = {Bung, Daniel B.},
  title     = {A comparative study of self-aerated stepped spillway and smooth invert chute flow: the effect of step-induced macro roughness},
  series = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  booktitle = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  publisher = {Univ. Press},
  address   = {Tianjin},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <5, 2010, Tianjin>},
  isbn      = {978-7-5618-3671-2},
  pages     = {451 -- 456},
  year      = {2010},
  language  = {en}
}
@inproceedings{Bung2012,
  author    = {Bung, Daniel B.},
  title     = {Sensitivity of phase detection techniques in aerated chute flows to hydraulic design parameters},
  series = {2nd European IAHR congress : 27. - 29. June 2012, M{\"u}nchen},
  booktitle = {2nd European IAHR congress : 27. - 29. June 2012, M{\"u}nchen},
  publisher = {Lehrstuhl u. Versuchsanst. f{\"u}r Wasserbau u. Wasserwirtschaft d. TU M{\"u}nchen},
  address   = {M{\"u}nchen},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {978-3-943683-03-5},
  pages     = {Artikelkennnummer: B15},
  year      = {2012},
  language  = {en}
}
@inproceedings{Bung2013,
  author    = {Bung, Daniel B.},
  title     = {Air-water surface roughness in self-aerated stepped spillway flows},
  series = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11045},
  year      = {2013},
  language  = {en}
}
@inproceedings{Bung2014,
  author    = {Bung, Daniel B.},
  title     = {Observations on non-aerated flow and air entrainment on moderately sloped stepped spillways},
  series = {7th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : 8. - 12. Sept. 2014, Hannover},
  booktitle = {7th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : 8. - 12. Sept. 2014, Hannover},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <7, 2014, Hannover>},
  pages     = {1 -- 8},
  year      = {2014},
  language  = {en}
}
@inproceedings{BungHildebrandtOerteletal.2008,
  author    = {Bung, Daniel B. and Hildebrandt, Arndt and Oertel, Mario and Schlenkhoff, Andreas and Schlurmann, Torsten},
  title     = {Bore propagation over a submerged horizontal plate by physical and numerical simulation},
  series = {Coastal engineering 2008 : proceedings of the 31st international conference; Hamburg, Germany, 31 August - 5 September 2008 ; Vol. 4},
  booktitle = {Coastal engineering 2008 : proceedings of the 31st international conference; Hamburg, Germany, 31 August - 5 September 2008 ; Vol. 4},
  editor    = {McKee Smith, Jane},
  isbn      = {9814277401 ; 9789814277402},
  pages     = {3542 -- 3553},
  year      = {2008},
  language  = {en}
}
@inproceedings{BungOertelSchlenkhoffetal.2010,
  author    = {Bung, Daniel B. and Oertel, M. and Schlenkhoff, A. and Schlurmann, Torsten},
  title     = {Flash flood awareness and prevention in Germany},
  series = {Early warning for flash floods : international workshop, Praha 2011 : workshop proceedings},
  booktitle = {Early warning for flash floods : international workshop, Praha 2011 : workshop proceedings},
  editor    = {Obrusnik, Ivan},
  organization    = {Czech Hydrometeorological Institute},
  isbn      = {978-80-86690-91-9},
  pages     = {34 -- 40},
  year      = {2010},
  language  = {en}
}
@inproceedings{BungOertel2014,
  author    = {Bung, Daniel B. and Oertel, Mario},
  title     = {Manipulation of non-aerated cavity flow on a stepped spillway model},
  series = {3rd European IAHR Congress : April 14 - 16, 2014, Porto},
  booktitle = {3rd European IAHR Congress : April 14 - 16, 2014, Porto},
  publisher = {Univ. of Porto},
  address   = {Porto},
  organization    = {International Association of Hydro-Environment Engineering and Research},
  year      = {2014},
  language  = {en}
}
@inproceedings{BungOertel2019,
  author    = {Bung, Daniel B. and Oertel, Mario},
  title     = {Wave breaking over a submerged horizontal plate: Optical Flow, LES and RANS},
  series = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0509},
  pages     = {3690 -- 3698},
  year      = {2019},
  language  = {en}
}
@inproceedings{BungPagliara2013,
  author    = {Bung, Daniel B. and Pagliara, S.},
  title     = {Proceedings of the International Workshop on Hydraulic Design of Low-Head Structures : Aachen, Germany, February, 20-22, 2013 / D. Bung ; S. Pagliara (eds.)},
  publisher = {Bundesanst. f{\"u}r Wasserbau},
  address   = {Karlsruhe},
  isbn      = {978-3-939230-04-5},
  pages     = {X, 230 S. + 1 CD-ROM},
  year      = {2013},
  language  = {en}
}
@inproceedings{BungSchlenkhoff2010,
  author    = {Bung, Daniel B. and Schlenkhoff, Andreas},
  title     = {Self-aerated skimming flow on embankment stepped spillways : the effect of additional micro-roughness on energy dissipation and oxygen transfer},
  series = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  booktitle = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  publisher = {Heriot-Watt University, School of the Built Environment},
  address   = {Edinburgh},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9780956595102},
  pages     = {Artikelkennnummer HSIIId},
  year      = {2010},
  language  = {en}
}
@inproceedings{BungSchlenkhoff2008,
  author    = {Bung, Daniel B. and Schlenkhoff, Andreas},
  title     = {Optimization of the reaeration potential on embankment stepped spillways in skimming flow regime},
  series = {Hydraulic structures : proceedings of the second International Junior Researcher and Engineer Workshop on Hydraulic Structures, Pisa, Italy, 30 July-1 August 2008},
  booktitle = {Hydraulic structures : proceedings of the second International Junior Researcher and Engineer Workshop on Hydraulic Structures, Pisa, Italy, 30 July-1 August 2008},
  editor    = {Pagliara, Stefano},
  organization    = {International Junior Researcher and Engineer Workshop on Hydraulic Structures <2, 2008, Pisa>},
  isbn      = {978-88-8492-568-8},
  pages     = {97 -- 106},
  year      = {2008},
  language  = {en}
}
@inproceedings{BungSchlenkhoffOertel2009,
  author    = {Bung, Daniel B. and Schlenkhoff, Andreas and Oertel, M.},
  title     = {Self-aerated skimming flow on embankment stepped spillways},
  series = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  booktitle = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9789078046080},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@inproceedings{BungSunMeirelesetal.2012,
  author    = {Bung, Daniel B. and Sun, Q. and Meireles, I. and Matos, J. and Viseu, T.},
  title     = {USBR type III stilling basin performance for steep stepped spillways},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{BungTullis2018,
  author    = {Bung, Daniel B. and Tullis, Blake},
  title     = {Hydraulic Structures - ISHS2018 in Perspective},
  series = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  booktitle = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  isbn      = {978-0-692-13277-7},
  doi       = {10.15142/T3WH2B},
  pages     = {9 seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{BungValero2015,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Image processing for bubble image velocimetry in self-aerated flows},
  series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {IAHR World Congress <36, 2015, Den Haag>},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@inproceedings{BungValero2016,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Application of the optical flow method to velocity determination in hydraulic structure models},
  series = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  booktitle = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  editor    = {Crookston, B. and Tullis, B.},
  isbn      = {978-1-884575-75-4},
  doi       = {10.15142/T3150628160853},
  pages     = {223 -- 232},
  year      = {2016},
  language  = {en}
}
@inproceedings{BungValero2016,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow},
  series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  editor    = {Dewals, Benjamin},
  publisher = {CRC Press},
  isbn      = {978-1-138-02977-4},
  doi       = {10.1201/b21902-31},
  pages     = {151 -- 157},
  year      = {2016},
  language  = {en}
}
@inproceedings{BungValero2017,
  author    = {Bung, Daniel B. and Valero, Daniel},
  title     = {FlowCV - An open-source toolbox for computer vision applications in turbulent flows},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {5356 -- 5365},
  year      = {2017},
  language  = {en}
}
@inproceedings{BuehlerLeandroBungetal.2015,
  author    = {B{\"u}hler, P. and Leandro, J. and Bung, Daniel B. and Lopes, P. and Carvalho, R.},
  title     = {Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions},
  series = {2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015},
  booktitle = {2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015},
  organization    = {International Workshop on Hydraulic Structures : Data Validation <2, 2015, Coimbra>},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@inproceedings{DuranParedesMottaghyHerrmannetal.2020,
  author    = {Duran Paredes, Ludwin and Mottaghy, Darius and Herrmann, Ulf and Groß, Rolf Fritz},
  title     = {Online ground temperature and soil moisture monitoring of a shallow geothermal system with non-conventional components},
  series = {EGU General Assembly 2020},
  booktitle = {EGU General Assembly 2020},
  year      = {2020},
  abstract  = {We present first results from a newly developed monitoring station for a closed loop geothermal heat pump test installation at our campus, consisting of helix coils and plate heat exchangers, as well as an ice-store system. There are more than 40 temperature sensors and several soil moisture content sensors distributed around the system, allowing a detailed monitoring under different operating conditions.In the view of the modern development of renewable energies along with the newly concepts known as Internet of Things and Industry 4.0 (high-tech strategy from the German government), we created a user-friendly web application, which will connect the things (sensors) with the open network (www). Besides other advantages, this allows a continuous remote monitoring of the data from the numerous sensors at an arbitrary sampling rate.Based on the recorded data, we will also present first results from numerical simulations, taking into account all relevant heat transport processes.The aim is to improve the understanding of these processes and their influence on the thermal behavior of shallow geothermal systems in the unsaturated zone. This will in turn facilitate the prediction of the performance of these systems and therefore yield an improvement in their dimensioning when designing a specific shallow geothermal installation.},
  language  = {en}
}
@inproceedings{DoeringFeldmannKuhnhenne2007,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus},
  title     = {An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests},
  series = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings},
  booktitle = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings},
  address   = {Helsinki},
  isbn      = {978-952-99898-2-9},
  pages     = {1 -- 8},
  year      = {2007},
  language  = {en}
}
@inproceedings{DoeringFeldmannKuhnhenneetal.2008,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus and Hellberg, Jan},
  title     = {Implementing a thermal activation system into a light-weight steel deck element},
  series = {Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...},
  booktitle = {Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...},
  publisher = {ECCS, European Convention for Construction Steelwork},
  address   = {Brussels},
  organization    = {Eurosteel <5, 2008, Graz>},
  isbn      = {92-0147-000-90},
  pages     = {941 -- 946},
  year      = {2008},
  language  = {en}
}
@inproceedings{DoeringKuhnhenneFeldmann2011,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Feldmann, Markus},
  title     = {Floor systems - key elements for sustainable multi-storey buildings},
  series = {SB11 Helsinki World Sustainable Building Conference : 18. - 21.10.2011},
  booktitle = {SB11 Helsinki World Sustainable Building Conference : 18. - 21.10.2011},
  organization    = {World Sustainable Building Conference <2011, Helsinki>},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@inproceedings{DoeringSedlacek2004,
  author    = {D{\"o}ring, Bernd and Sedlacek, Gerhard},
  title     = {Improvement of thermal comfort in light weight buildings made of steel with new concepts for slab systems},
  series = {10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings},
  booktitle = {10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings},
  publisher = {Danish Steel Inst.},
  address   = {Copenhagen},
  organization    = {Nordic Steel Construction Conference <10, 2004, Copenhagen>},
  pages     = {35 -- 44},
  year      = {2004},
  language  = {en}
}
@inproceedings{DoeringZillerHortmanns2003,
  author    = {D{\"o}ring, Bernd and Ziller, Claudia and Hortmanns, M.},
  title     = {Ventilation of double facades by external dynamic wind pressure},
  series = {11th International Conference on Wind Engineering. 1},
  booktitle = {11th International Conference on Wind Engineering. 1},
  publisher = {The Wind Science and Engineering Research Center},
  address   = {Lubbock, Tex.},
  organization    = {International Conference on Wind Engineering <11, 2003, Lubbock, Tex.>},
  pages     = {721 -- 730},
  year      = {2003},
  language  = {en}
}
@inproceedings{FeldmannPyschnyDoeringetal.2012,
  author    = {Feldmann, Markus and Pyschny, D. and D{\"o}ring, Bernd and Kuhnhenne, Markus},
  title     = {Life cycle assessment of steel constructions},
  series = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  booktitle = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Symposium on Life-Cycle Civil Engineering <3, 2012, Wien>},
  isbn      = {978-0-203-10336-4},
  pages     = {321},
  year      = {2012},
  language  = {en}
}
@inproceedings{FellinKingKirschetal.2009,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  booktitle = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla. [u.a.]},
  organization    = {International Conference on Structural Safety and Reliability <10, 2009, Osaka>},
  isbn      = {978-0-415-47557-0},
  pages     = {112 -- 114},
  year      = {2009},
  language  = {en}
}
@inproceedings{GanegedaraAlahakoonMashfordetal.2012,
  author    = {Ganegedara, H. and Alahakoon, D. and Mashford, J. and Paplinski, A. and M{\"u}ller, Karsten and Deserno, T. M.},
  title     = {Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections},
  series = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  booktitle = {The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {IEEE Computational Intelligence Society (IEEE-CIS)},
  isbn      = {978-1-4673-1490-9},
  pages     = {8 S.},
  year      = {2012},
  language  = {en}
}
@inproceedings{GogolinCarvalhoBungetal.2013,
  author    = {Gogolin, C. and Carvalho, R. and Bung, Daniel B. and Matos, J.},
  title     = {Experimental and numerical investigation of steady and unsteady flows in roughened channels with cross beams},
  series = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A10837C},
  year      = {2013},
  language  = {en}
}
@inproceedings{HeinzOertelBung2010,
  author    = {Heinz, G. and Oertel, Mario and Bung, Daniel B.},
  title     = {Investigations on a cooling water system for a gas tubine facility concerning air vortexes and sediment transport},
  series = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  booktitle = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  editor    = {Janssen, Robert},
  publisher = {School of Civil Engineering, The University of Queensland},
  address   = {Brisbane},
  organization    = {International Junior Researcher and Engineer Workshop on Hydraulic Structures <3, 2010, Edinburgh>},
  isbn      = {9781742720159},
  pages     = {109 -- 116},
  year      = {2010},
  language  = {en}
}
@inproceedings{JockwerKleiberUibel2018,
  author    = {Jockwer, R. and Kleiber, M. and Uibel, Thomas},
  title     = {Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners},
  series = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  booktitle = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  editor    = {G{\"o}rlacher, Rainer},
  publisher = {Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  pages     = {461 -- 466},
  year      = {2018},
  language  = {en}
}
@inproceedings{KerpenBungSchlurmann2010,
  author    = {Kerpen, N. B. and Bung, Daniel B. and Schlurmann, Torsten},
  title     = {Physical model investigations of ships passing through a lock},
  series = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  booktitle = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  editor    = {Janssen, Robert},
  publisher = {School of Civil Engineeering, The University of Queensland},
  address   = {Brisbane},
  organization    = {International Junior Researcher and Engineer Workshop on Hydraulic Structures <3, 2010, Edinburgh>},
  isbn      = {9781742720159},
  pages     = {93 -- 100},
  year      = {2010},
  language  = {en}
}
@inproceedings{KerpenBungSchlurmann2010,
  author    = {Kerpen, N. B. and Bung, Daniel B. and Schlurmann, Torsten},
  title     = {Physical model investigations of pressure distributions next to ships passing through a lock},
  series = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  booktitle = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  publisher = {Univ. Press},
  address   = {Tianjin},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <5, 2010, Tianjin>},
  isbn      = {978-7-5618-3671-2},
  pages     = {514 -- 519},
  year      = {2010},
  language  = {en}
}
@inproceedings{KerpenBungValeroetal.2016,
  author    = {Kerpen, Nils B. and Bung, Daniel B. and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China},
  booktitle = {8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China},
  pages     = {6 Seiten},
  year      = {2016},
  language  = {en}
}
@inproceedings{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Numerical investigation of the face stability of shallow tunnels in sand},
  series = {Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...},
  booktitle = {Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...},
  publisher = {Taylor and Francis},
  address   = {London},
  organization    = {European Conference on Numerical Methods in Geotechnical Engineering <7, 2010, Trondheim>},
  isbn      = {978-0-415-59239-0},
  pages     = {779 -- 784},
  year      = {2010},
  language  = {en}
}
@inproceedings{Kirsch2009,
  author    = {Kirsch, Ansgar},
  title     = {Experimental and numerical investigation of the face stability of shallow tunnels in sand},
  series = {Safe tunnelling for the city and environment : proceedings of the World Tunnel Congress 2009, Budapest, Hungary, 23 to 28 September 2009 / organised by International Tunnelling and Underground Space Association ...},
  booktitle = {Safe tunnelling for the city and environment : proceedings of the World Tunnel Congress 2009, Budapest, Hungary, 23 to 28 September 2009 / organised by International Tunnelling and Underground Space Association ...},
  publisher = {Hungarian Tunnelling Association},
  address   = {Budapest},
  organization    = {World Tunnel Congress <2009, Budapest>},
  pages     = {1 -- 8},
  year      = {2009},
  language  = {en}
}
@inproceedings{KirschFelberMarcheretal.2014,
  author    = {Kirsch, Ansgar and Felber, W. and Marcher, Thomas and Fuchs, W.},
  title     = {Geotechnical challenges during design and construction of a ski resort in Azerbaijan},
  series = {Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria},
  booktitle = {Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria},
  publisher = {{\"O}IAV - {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  address   = {Wien},
  organization    = {Danube - European Conference on Geotechnical Engineering <15, 2014, Wien>},
  isbn      = {978-3-902593-01-6},
  pages     = {757 -- 762},
  year      = {2014},
  language  = {en}
}
@inproceedings{KirschMarcher2010,
  author    = {Kirsch, Ansgar and Marcher, Thomas},
  title     = {Numerical prediction of time-dependent rock swelling based on an example of a major tunnel project in Ontario/Canada},
  series = {Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...},
  booktitle = {Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...},
  publisher = {Taylor and Francis},
  address   = {London},
  organization    = {European Conference on Numerical Methods in Geotechnical Engineering <7, 2010, Trondheim>},
  isbn      = {978-0-415-59239-0},
  pages     = {297 -- 302},
  year      = {2010},
  language  = {en}
}
@inproceedings{KuhnhenneDoeringPyschnyetal.2012,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Pyschny, Dominik and Feldmann, Markus},
  title     = {Energy efficient sandwich construction},
  series = {Proceedings of the VI International Congress on Architectural Envelopes : 20.6. - 22.6.2012, San Sebastian, Spain},
  booktitle = {Proceedings of the VI International Congress on Architectural Envelopes : 20.6. - 22.6.2012, San Sebastian, Spain},
  publisher = {ICAE},
  organization    = {International Congress on Architectural Envelopes <6, 2012, San Sebastian>},
  pages     = {277 -- 285},
  year      = {2012},
  language  = {en}
}
@inproceedings{LopesBungLeandroetal.2015,
  author    = {Lopes, Pedro and Bung, Daniel B. and Leandro, Jorge and Carvalho, Rita F.},
  title     = {The effect of cross-waves in physical stepped spillway models},
  series = {E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {International Association for Hydro-Environment Engineering and Research},
  pages     = {1 -- 9},
  year      = {2015},
  language  = {en}
}
@inproceedings{MerkensHebel2021,
  author    = {Merkens, Torsten and Hebel, Christoph},
  title     = {Sharing mobility concepts - flexible, sustainable, smart},
  series = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG)},
  booktitle = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG)},
  isbn      = {978-3-902103-94-9},
  pages     = {43 -- 44},
  year      = {2021},
  language  = {en}
}
@inproceedings{MohanGrossMenzeletal.2021,
  author    = {Mohan, Nijanthan and Groß, Rolf Fritz and Menzel, Karsten and Theis, Fabian},
  title     = {Opportunities and Challenges in the Implementation of Building Information Modeling for Prefabrication of Heating, Ventilation and Air Conditioning Systems in Small and Medium-Sized Contracting Companies in Germany - A Case Study},
  series = {WIT Transactions on The Built Environment, Vol. 205},
  booktitle = {WIT Transactions on The Built Environment, Vol. 205},
  publisher = {WIT Press},
  address   = {Southampton},
  issn      = {1743-3509},
  doi       = {10.2495/BIM210101},
  pages     = {117 -- 126},
  year      = {2021},
  abstract  = {FEven though BIM (Building Information Modelling) is successfully implemented in most of the world, it is still in the early stages in Germany, since the stakeholders are sceptical of its reliability and efficiency. The purpose of this paper is to analyse the opportunities and obstacles to implementing BIM for prefabrication. Among all other advantages of BIM, prefabrication is chosen for this paper because it plays a vital role in creating an impact on the time and cost factors of a construction project. The project stakeholders and participants can explicitly observe the positive impact of prefabrication, which enables the breakthrough of the scepticism factor among the small-scale construction companies. The analysis consists of the development of a process workflow for implementing prefabrication in building construction followed by a practical approach, which was executed with two case studies. It was planned in such a way that, the first case study gives a first-hand experience for the workers at the site on the BIM model so that they can make much use of the created BIM model, which is a better representation compared to the traditional 2D plan. The main aim of the first case study is to create a belief in the implementation of BIM Models, which was succeeded by the execution of offshore prefabrication in the second case study. Based on the case studies, the time analysis was made and it is inferred that the implementation of BIM for prefabrication can reduce construction time, ensures minimal wastes, better accuracy, less problem-solving at the construction site. It was observed that this process requires more planning time, better communication between different disciplines, which was the major obstacle for successful implementation. This paper was carried out from the perspective of small and medium-sized mechanical contracting companies for the private building sector in Germany.},
  language  = {en}
}
@inproceedings{MuellerFischer2009,
  author    = {M{\"u}ller, Karsten and Fischer, B.},
  title     = {Objective condition assessment of sewer systems},
  series = {Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do C{\´e}u Almeida},
  booktitle = {Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do C{\´e}u Almeida},
  publisher = {IWA Publ.},
  address   = {London},
  isbn      = {9781843391869},
  pages     = {521 -- 534},
  year      = {2009},
  language  = {en}
}
@inproceedings{MuellerHueben2008,
  author    = {M{\"u}ller, Karsten and H{\"u}ben, Susanne},
  title     = {From rehabilitation strategy up to formation of lots : implementation of a computer-aided decision support system},
  series = {11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31st August to 5th September 2008},
  booktitle = {11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31st August to 5th September 2008},
  pages     = {12 S. : graph. Darst.},
  year      = {2008},
  language  = {en}
}
@inproceedings{OertelBung2016,
  author    = {Oertel, M. and Bung, Daniel B.},
  title     = {Scouring processes downstream a crossbar block ramp},
  series = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  booktitle = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  editor    = {Crookston, B. and Tullis, B.},
  isbn      = {978-1-884575-75-4},
  doi       = {10.15142/T3340628160853},
  pages     = {549 -- 559},
  year      = {2016},
  language  = {en}
}
@inproceedings{OertelBungSchlenkhoff2009,
  author    = {Oertel, M. and Bung, Daniel B. and Schlenkhoff, Andreas},
  title     = {Flash flood awareness and prevention},
  series = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  booktitle = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9789078046080},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@inproceedings{OertelBalmesBung2015,
  author    = {Oertel, Mario and Balmes, Jan P. and Bung, Daniel B.},
  title     = {Numerical simulation of erosion processes on crossbar block ramps},
  series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {IAHR World Congress <36, 2015, Den Haag>},
  pages     = {1 -- 8},
  year      = {2015},
  language  = {en}
}
@inproceedings{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Characteristics of cross-bar block ramp flows},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{OertelBung2013,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Comparison of 2D dam-break waves with VOF and SPH method},
  series = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11113},
  year      = {2013},
  language  = {en}
}
@inproceedings{SchlenkhoffBung2009,
  author    = {Schlenkhoff, Andreas and Bung, Daniel B.},
  title     = {Prediction of oxygen transfer in self-aerated skimming flow on embankment stepped spillways},
  series = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  booktitle = {Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9789078046080},
  pages     = {1 CD-ROM},
  year      = {2009},
  language  = {en}
}
@inproceedings{SchlurmannBung2012,
  author    = {Schlurmann, Torsten and Bung, Daniel B.},
  title     = {Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam},
  series = {Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung},
  booktitle = {Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <6, 2012, Keelung>},
  pages     = {7 -- 14},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Miniature urban farming plant: a complex educational "Toy" for engineering students},
  series = {The Future of Education 11th Edition 2021},
  booktitle = {The Future of Education 11th Edition 2021},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {Urban farming is an innovative and sustainable way of food production and is becoming more and more important in smart city and quarter concepts. It also enables the production of certain foods in places where they usually dare not produced, such as production of fish or shrimps in large cities far away from the coast. Unfortunately, it is not always possible to show students such concepts and systems in real life as part of courses: visits of such industry plants are sometimes not possible because of distance or are permitted by the operator for hygienic reasons. In order to give the students the opportunity of getting into contact with such an urban farming system and its complex operation, an industrial urban farming plant was set up on a significantly smaller scale. Therefore, all needed technical components like water aeriation, biological and mechanical filtration or water circulation have been replaced either by aquarium components or by self-designed parts also using a 3D-printer. Students from different courses like mechanical engineering, smart building engineering, biology, electrical engineering, automation technology and civil engineering were involved in this project. This "miniature industrial plant" was also able to start operation and has now been running for two years successfully. Due to Corona pandemic, home office and remote online lectures, the automation of this miniature plant should be brought to a higher level in future for providing a good control over the system and water quality remotely. The aim of giving the student a chance to get to know the operation of an urban farming plant was very well achieved and the students had lots of fun in "playing" and learning with it in a realistic way.},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions},
  series = {New Perspectives in Science Education -International Conference (virtual event, 18-19 March 2021)},
  booktitle = {New Perspectives in Science Education -International Conference (virtual event, 18-19 March 2021)},
  publisher = {Filodiritto},
  address   = {Bologna},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future.},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGrossUlbrich2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz and Ulbrich, Michelle},
  title     = {Digital planning using building information modelling and virtual reality: new approach for students' remote practical training under lockdown conditions in the course of smart building engineering},
  series = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  booktitle = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  publisher = {ISTES Organization},
  address   = {San Antonio, TX},
  isbn      = {978-1-952092-17-6},
  pages     = {118 -- 123},
  year      = {2021},
  abstract  = {The worldwide Corona pandemic has severely restricted student projects in the higher semesters of engineering courses. In order not to delay the graduation, a new concept had to be developed for projects under lockdown conditions. Therefore, unused rooms at the university should be digitally recorded in order to develop a new usage concept as laboratory rooms. An inventory of the actual state of the rooms was done first by taking photos and listing up all flaws and peculiarities. After that, a digital site measuring was done with a 360° laser scanner and these recorded scans were linked to a coherent point cloud and transferred to a software for planning technical building services and supporting Building Information Modelling (BIM). In order to better illustrate the difference between the actual and target state, two virtual reality models were created for realistic demonstration. During the project, the students had to go through the entire digital planning phases. Technical specifications had to be complied with, as well as documentation, time planning and cost estimate. This project turned out to be an excellent alternative to on-site practical training under lockdown conditions and increased the students' motivation to deal with complex technical questions.},
  language  = {en}
}
@inproceedings{SiekmannMueller2011,
  author    = {Siekmann, Thomas and M{\"u}ller, Karsten},
  title     = {Adaptive potential of the stormwater management in urban areas faced by the climate change},
  series = {12th International Conference on Urban Drainage, Porto Alegre/Brazil, 11-16 September 2011},
  booktitle = {12th International Conference on Urban Drainage, Porto Alegre/Brazil, 11-16 September 2011},
  pages     = {9 S.},
  year      = {2011},
  language  = {en}
}
@inproceedings{SpasovDoeringGriffin2007,
  author    = {Spasov, Yulian and D{\"o}ring, Bernd and Griffin, Allan},
  title     = {Exploiting the thermal mass in an energy efficient building - a comparison exercise between IES Apache and TRNSYS models},
  series = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings},
  booktitle = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings},
  address   = {Helsinki},
  isbn      = {978-952-99898-2-9},
  pages     = {1 -- 7},
  year      = {2007},
  language  = {en}
}
@inproceedings{StepkesZimmermannMuelleretal.2007,
  author    = {Stepkes, Hermann and Zimmermann, J. and M{\"u}ller, Karsten and Siekmann, Marko and Pinnekamp, Josef},
  title     = {Economical rehabilitation of sewer systems by ground penetration radar investigations},
  series = {Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do C{\´e}u Almeida},
  booktitle = {Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do C{\´e}u Almeida},
  publisher = {IWA Publ.},
  address   = {London},
  isbn      = {9781843391869},
  pages     = {501 -- 520},
  year      = {2007},
  language  = {en}
}
@inproceedings{TullisCrookstonBung2019,
  author    = {Tullis, Blake P. and Crookston, Brian M. and Bung, Daniel B.},
  title     = {Weir head-discharge relationships: A multi-lab exercise},
  series = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress September 1-6, 2019, Panama City, Panama},
  pages     = {1 -- 15},
  year      = {2019},
  language  = {en}
}
@inproceedings{UibelBlass2006,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {Load Carrying Capacity of Joints with Dowel Type Fasteners in Solid Wood Panels},
  series = {Proceedings. CIB-W18 Meeting 2006, Florence, Italy 2006},
  booktitle = {Proceedings. CIB-W18 Meeting 2006, Florence, Italy 2006},
  issn      = {0945-6996},
  pages     = {1 -- 10},
  year      = {2006},
  language  = {en}
}
@inproceedings{UibelBlass2007,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {Edge Joints with Dowel Type Fasteners in Cross Laminated Timber},
  series = {Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007},
  booktitle = {Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007},
  issn      = {0945-6996},
  pages     = {1 -- 11},
  year      = {2007},
  language  = {en}
}
@inproceedings{UibelBlass2010,
  author    = {Uibel, Thomas and Blaß, Hans Joachim},
  title     = {A new method to determine suitable spacings and distances for self-tapping screws},
  series = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  volume    = {43},
  booktitle = {Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures},
  publisher = {Lehrstuhl f{\"u}r Ingenieurholzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  issn      = {1864-1784},
  year      = {2010},
  abstract  = {The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.},
  language  = {en}
}
@inproceedings{UibelBlass2013,
  author    = {Uibel, Thomas and Blaß, Hans-Joachim},
  title     = {Joints with Dowel Type Fasteners in CLT structures},
  series = {Focus solid timber solutions : European Conference on Cross Laminated Timber (CLT); May 21-22, 2013, Graz University of Technology, Austria},
  booktitle = {Focus solid timber solutions : European Conference on Cross Laminated Timber (CLT); May 21-22, 2013, Graz University of Technology, Austria},
  organization    = {European Conference on Cross Laminated Timber <2013, Graz>},
  isbn      = {978-1-85790-181-8 ; 1-85790-181-9},
  pages     = {119 -- 134},
  year      = {2013},
  language  = {en}
}
@inproceedings{ValeroBung2015,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Hybrid investigation of air transport processes in moderately sloped stepped spillway flows},
  series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands},
  organization    = {IAHR World Congress <36, 2015, Den Haag>},
  pages     = {1 -- 10},
  year      = {2015},
  language  = {en}
}
@inproceedings{ValeroBung2016,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Interfacial velocity estimation in highly aerated stepped spillway flows with a single tip fibre optical probe and Artificial Neural Networks},
  series = {6th IAHR International Junior Researcher and Engineer Workshop on Hydraulic Structures, May 30th to June 1st 2016. L{\"u}beck, Germany},
  booktitle = {6th IAHR International Junior Researcher and Engineer Workshop on Hydraulic Structures, May 30th to June 1st 2016. L{\"u}beck, Germany},
  doi       = {10.15142/T3Q590},
  pages     = {13 Seiten},
  year      = {2016},
  abstract  = {Air-water flows can be found in different engineering applications: from nuclear engineering to huge hydraulic structures. In this paper, a single tip fibre optical probe has been used to record high frequency (over 1 MHz) phase functions at different locations of a stepped spillway. These phase functions have been related to the interfacial velocities by means of Artificial Neural Networks (ANN) and the measurements of a classical double tip conductivity probe. Special attention has been put to the input selection and the ANN dimensions. Finally, ANN have shown to be able to link the signal rising times and plateau shapes to the air-water interfacial velocity.},
  language  = {en}
}
@inproceedings{ValeroBungCrookstonetal.2016,
  author    = {Valero, Daniel and Bung, Daniel B. and Crookston, B. M. and Matos, J.},
  title     = {Numerical investigation of USBR type III stilling basin performance downstream of smooth and stepped spillways},
  series = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  booktitle = {Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016},
  editor    = {Crookston, B. and Tullis, B.},
  isbn      = {978-1-884575-75-4},
  doi       = {10.15142/T340628160853},
  pages     = {635 -- 646},
  year      = {2016},
  language  = {en}
}
@inproceedings{ValeroBungErpicumetal.2017,
  author    = {Valero, Daniel and Bung, Daniel B. and Erpicum, Sebastien and Dewals, Benjamin},
  title     = {Numerical study of turbulent oscillations around a cylinder: RANS capabilities and sensitivity analysis},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {3126 -- 3135},
  year      = {2017},
  language  = {en}
}
@inproceedings{ValeroBungOertel2016,
  author    = {Valero, Daniel and Bung, Daniel B. and Oertel, M.},
  title     = {Turbulent dispersion in bounded horizontal jets : RANS capabilities and physical modeling comparison},
  series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)},
  editor    = {Dewals, Benjamin},
  publisher = {CRC Press},
  isbn      = {978-1-138-02977-4},
  doi       = {10.1201/b21902-13},
  pages     = {49 -- 55},
  year      = {2016},
  language  = {en}
}
@inproceedings{ValeroKramerBungetal.2019,
  author    = {Valero, Daniel and Kramer, Matthias and Bung, Daniel B. and Chanson, Hubert},
  title     = {A stochastic bubble generator for air-water flow research},
  series = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  booktitle = {E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama},
  doi       = {10.3850/38WC092019-0909},
  pages     = {5714 -- 5721},
  year      = {2019},
  language  = {en}
}
@inproceedings{ValeroVogelSchmidtetal.2018,
  author    = {Valero, Daniel and Vogel, Jochen and Schmidt, Daniel and Bung, Daniel B.},
  title     = {Three-dimensional flow structure inside the cavity of a non-aerated stepped chute},
  series = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  booktitle = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May},
  isbn      = {978-0-692-13277-7},
  doi       = {10.15142/T3GH17},
  pages     = {12 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{ZillerDoering2003,
  author    = {Ziller, Claudia and D{\"o}ring, Bernd},
  title     = {Influence of the external dynamic wind pressure on the ventilation of double facades},
  series = {Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003},
  booktitle = {Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003},
  editor    = {Carmeliet, J. and Hens, H. and Vermeir, G.},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Conference on Building Physics <2, 2003, Leuven>},
  isbn      = {9058095657, 9789058095657},
  pages     = {527 -- 533},
  year      = {2003},
  language  = {en}
}