@article{GrundmannBommesDieter1998, author = {Grundmann, Reinhard and Bommes, Leonhard and Dieter, Reinartz}, title = {Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 1}, series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5}, journal = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 49 (1998), H. 5}, isbn = {0017-9906}, pages = {28 -- 37}, year = {1998}, language = {de} } @article{MuribYeapEurlingsetal.2016, author = {Murib, Mohammed Sharif and Yeap, Weng Siang and Eurlings, Y. and Grinsven, Bart van and Boyen, Hans-Gerd and Conings, Bert and Michiels, Luc and Ameloot, Marcel and Carleer, R. and Warmer, Johannes and Kaul, Peter Michael and Haenen, Ken and Sch{\"o}ning, Michael Josef and de Ceuninck, Ward A. and Wagner, Patrick Hermann}, title = {Heat-transfer based characterization of DNA on synthetic sapphire chips}, series = {Sensors and Actuators B: Chemical}, volume = {230}, journal = {Sensors and Actuators B: Chemical}, number = {230}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0925-4005}, doi = {10.1016/j.snb.2016.02.027}, pages = {260 -- 271}, year = {2016}, abstract = {In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.}, language = {en} } @article{BaumannLancelotBrandinietal.1994, author = {Baumann, Marcus and Lancelot, Christiane and Brandini, Frederico Pereira and Sakshaug, Egil and John, David Michael}, title = {The taxonomic identity of the cosmopolitan prymnesiophyte Phaeocystis, a morphological and ecophysiological approach / Baumann, M.E.M. ; Lancelot, C. ; Brandini, F. ; Sakshaug, E. ; John M.}, series = {Journal of Marine Systems. 5 (1994), H. 1}, journal = {Journal of Marine Systems. 5 (1994), H. 1}, isbn = {0924-7963}, pages = {5 -- 22}, year = {1994}, language = {en} } @article{BaumannBrandiniStaubes1994, author = {Baumann, Marcus and Brandini, Frederico Pereira and Staubes, Regina}, title = {The influence of light and temperature on carbonspecific DMS release by cultures of Phaeocystis antarctica and three antarctic diatoms / Baumann, Marcus E.M. ; Brandini, Frederico ; Staubes, Regina}, series = {Marine Chemistry. 45 (1994), H. 1-2}, journal = {Marine Chemistry. 45 (1994), H. 1-2}, isbn = {0304-4203}, pages = {129 -- 136}, year = {1994}, language = {en} } @article{ZiemonsHerzogBosettietal.1992, author = {Ziemons, Karl and Herzog, Hans and Bosetti, P. and Feinendegen, L. E.}, title = {Iterative image reconstruction with weighted pixel contribution to projection elements}, series = {European Journal of Nuclear Medicine}, volume = {19}, journal = {European Journal of Nuclear Medicine}, number = {8}, isbn = {1619-7089}, pages = {588 -- 588}, year = {1992}, language = {en} } @article{HoettgesKochBosbach1995, author = {H{\"o}ttges, J{\"o}rg and Koch, Hans-Georg and Bosbach, Ralf}, title = {Automatische Konstruktion von Teileinzugsgebieten f{\"u}r die Kanalnetzberechnung}, series = {Korrespondenz Abwasser : KA ; Informationsbl. f{\"u}r d. Abwasserwesen ; Wasser, Abwasser, Abfall / Gesellschaft zur F{\"o}rderung der Abwassertechnik. 42 (1995), H. 12}, journal = {Korrespondenz Abwasser : KA ; Informationsbl. f{\"u}r d. Abwasserwesen ; Wasser, Abwasser, Abfall / Gesellschaft zur F{\"o}rderung der Abwassertechnik. 42 (1995), H. 12}, isbn = {0341-1478}, year = {1995}, language = {de} } @article{BaeckerRaueSchusseretal.2012, author = {B{\"a}cker, Matthias and Raue, Markus and Schusser, Sebastian and Jeitner, C. and Breuer, Lars and Wagner, P. and Poghossian, Arshak and F{\"o}rster, Arnold and Mang, Thomas and Sch{\"o}ning, Michael Josef}, title = {Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films}, series = {Physica Status Solidi (a)}, volume = {209}, journal = {Physica Status Solidi (a)}, number = {5}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1862-6319}, doi = {10.1002/pssa.201100763}, pages = {839 -- 845}, year = {2012}, abstract = {Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3-12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.}, language = {en} } @article{BaeckerKramerHucketal.2014, author = {B{\"a}cker, Matthias and Kramer, F. and Huck, Christina and Poghossian, Arshak and Bratov, Andrey V. and Abramova, N. and Sch{\"o}ning, Michael Josef}, title = {Planar and 3D interdigitated electrodes for biosensing applications: The impact of a dielectric barrier on the sensor properties}, series = {Physica Status Solidi (A) - Applications and Materials Science}, volume = {211}, journal = {Physica Status Solidi (A) - Applications and Materials Science}, number = {6}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)}, doi = {10.1002/pssa.201330416}, pages = {1357 -- 1363}, year = {2014}, abstract = {Planar and three-dimensional (3D) interdigitated electrodes (IDE) with electrode digits separated by an insulating barrier of different heights were electrochemically characterized and compared in terms of their sensing properties. Due to the impact of the surface resistance, both types of IDE structures display a non-linear behavior in low-ionic strength solutions. The experimental data were fitted to an electrical equivalent circuit and interpreted taking into account the surface-charge-governed properties. The effect of a charged polyelectrolyte layer electrostatically assembled onto the sensor surface on the surface resistance in solutions with different KCl concentration is studied. In case of the same electrode footprint, 3D-IDEs show a larger cell constant and a higher sensitivity to molecular adsorption than that of planar IDEs. The obtained results demonstrate the potential of 3D-IDEs as a new transducer structure for a direct label-free sensing of charged molecules.}, language = {en} } @article{KloockMorenoBratovetal.2006, author = {Kloock, Joachim P. and Moreno, Lia and Bratov, Andrey V. and Huachupoma, S. and Xu, Jingjuan and Wagner, Torsten and Yoshinobu, Tatsuo and Ermolenko, Y. E. and Vlasov, Yu G. G. and Sch{\"o}ning, Michael Josef}, title = {PLD-prepared cadmium sensors based on chalcogenide glasses —ISFET, LAPS and \&\#956;ISE semiconductor structures}, series = {Sensors and Actuators B: Chemical. 118 (2006), H. 1-2}, journal = {Sensors and Actuators B: Chemical. 118 (2006), H. 1-2}, isbn = {0925-4005}, pages = {149 -- 155}, year = {2006}, language = {en} } @article{KetelhutGoellBraunsteinetal.2018, author = {Ketelhut, Maike and G{\"o}ll, Fabian and Braunstein, Bj{\"o}rn and Albracht, Kirsten and Abel, Dirk}, title = {Comparison of different training algorithms for the leg extension training with an industrial robot}, series = {Current Directions in Biomedical Engineering}, volume = {4}, journal = {Current Directions in Biomedical Engineering}, number = {1}, publisher = {De Gruyter}, address = {Berlin}, issn = {2364-5504}, doi = {10.1515/cdbme-2018-0005}, pages = {17 -- 20}, year = {2018}, abstract = {In the past, different training scenarios have been developed and implemented on robotic research platforms, but no systematic analysis and comparison have been done so far. This paper deals with the comparison of an isokinematic (motion with constant velocity) and an isotonic (motion against constant weight) training algorithm. Both algorithms are designed for a robotic research platform consisting of a 3D force plate and a high payload industrial robot, which allows leg extension training with arbitrary six-dimensional motion trajectories. In the isokinematic as well as the isotonic training algorithm, individual paths are defined i n C artesian s pace by sufficient s upport p oses. I n t he i sotonic t raining s cenario, the trajectory is adapted to the measured force as the robot should only move along the trajectory as long as the force applied by the user exceeds a minimum threshold. In the isotonic training scenario however, the robot's acceleration is a function of the force applied by the user. To validate these findings, a simulative experiment with a simple linear trajectory is performed. For this purpose, the same force path is applied in both training scenarios. The results illustrate that the algorithms differ in the force dependent trajectory adaption.}, language = {en} } @article{KetelhutBrueggeGoelletal.2020, author = {Ketelhut, Maike and Br{\"u}gge, G. M. and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk}, title = {Adaptive iterative learning control of an industrial robot during neuromuscular training}, series = {IFAC PapersOnLine}, volume = {53}, journal = {IFAC PapersOnLine}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2405-8963}, doi = {10.1016/j.ifacol.2020.12.741}, pages = {16468 -- 16475}, year = {2020}, abstract = {To prevent the reduction of muscle mass and loss of strength coming along with the human aging process, regular training with e.g. a leg press is suitable. However, the risk of training-induced injuries requires the continuous monitoring and controlling of the forces applied to the musculoskeletal system as well as the velocity along the motion trajectory and the range of motion. In this paper, an adaptive norm-optimal iterative learning control algorithm to minimize the knee joint loadings during the leg extension training with an industrial robot is proposed. The response of the algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee and compared to the results of a higher-order iterative learning control algorithm, a robust iterative learning control and a recently proposed conventional norm-optimal iterative learning control algorithm. Although significant improvements in performance are made compared to the conventional norm-optimal iterative learning control algorithm with a small learning factor, for the developed approach as well as the robust iterative learning control algorithm small steady state errors occur.}, language = {en} } @article{HerssensCowburnAlbrachtetal.2022, author = {Herssens, Nolan and Cowburn, James and Albracht, Kirsten and Braunstein, Bjoern and Cazzola, Dario and Colyer, Steffi and Minetti, Alberto E. and Pavei, Gaspare and Rittweger, J{\"o}rn and Weber, Tobias and Green, David A.}, title = {Movement in low gravity environments (MoLo) programme - the MoLo-L.O.O.P. study protocol}, series = {PLOS ONE / Public Library of Science}, volume = {17}, journal = {PLOS ONE / Public Library of Science}, number = {11}, editor = {Cattaneo, Luigi}, publisher = {Plos}, address = {San Francisco}, issn = {1932-6203}, doi = {10.1371/journal.pone.0278051}, pages = {e0278051}, year = {2022}, abstract = {Exposure to prolonged periods in microgravity is associated with deconditioning of the musculoskeletal system due to chronic changes in mechanical stimulation. Given astronauts will operate on the Lunar surface for extended periods of time, it is critical to quantify both external (e.g., ground reaction forces) and internal (e.g., joint reaction forces) loads of relevant movements performed during Lunar missions. Such knowledge is key to predict musculoskeletal deconditioning and determine appropriate exercise countermeasures associated with extended exposure to hypogravity.}, language = {en} } @article{RichterBraunsteinStaeudleetal.2021, author = {Richter, Charlotte and Braunstein, Bjoern and St{\"a}udle, Benjamin and Attias, Julia and Suess, Alexander and Weber, Tobias and Mileva, Katja N. and Rittweger, Joern and Green, David A. and Albracht, Kirsten}, title = {Gastrocnemius medialis contractile behavior is preserved during 30\% body weight supported gait training}, series = {Frontiers in Sports and Active Living}, volume = {2021}, journal = {Frontiers in Sports and Active Living}, number = {2}, publisher = {Frontiers}, address = {Lausanne}, issn = {2624-9367}, doi = {10.3389/fspor.2020.614559}, pages = {Artikel 614559}, year = {2021}, abstract = {Rehabilitative body weight supported gait training aims at restoring walking function as a key element in activities of daily living. Studies demonstrated reductions in muscle and joint forces, while kinematic gait patterns appear to be preserved with up to 30\% weight support. However, the influence of body weight support on muscle architecture, with respect to fascicle and series elastic element behavior is unknown, despite this having potential clinical implications for gait retraining. Eight males (31.9 ± 4.7 years) walked at 75\% of the speed at which they typically transition to running, with 0\% and 30\% body weight support on a lower-body positive pressure treadmill. Gastrocnemius medialis fascicle lengths and pennation angles were measured via ultrasonography. Additionally, joint kinematics were analyzed to determine gastrocnemius medialis muscle-tendon unit lengths, consisting of the muscle's contractile and series elastic elements. Series elastic element length was assessed using a muscle-tendon unit model. Depending on whether data were normally distributed, a paired t-test or Wilcoxon signed rank test was performed to determine if body weight supported walking had any effects on joint kinematics and fascicle-series elastic element behavior. Walking with 30\% body weight support had no statistically significant effect on joint kinematics and peak series elastic element length. Furthermore, at the time when peak series elastic element length was achieved, and on average across the entire stance phase, muscle-tendon unit length, fascicle length, pennation angle, and fascicle velocity were unchanged with respect to body weight support. In accordance with unchanged gait kinematics, preservation of fascicle-series elastic element behavior was observed during walking with 30\% body weight support, which suggests transferability of gait patterns to subsequent unsupported walking.}, language = {en} } @article{KaramanidisAlbrachtBraunsteinetal.2011, author = {Karamanidis, Kiros and Albracht, Kirsten and Braunstein, Bjoern and Catala, Maria Moreno and Goldmann, Jan-Peter and Br{\"u}ggemann, Gert-Peter}, title = {Lower leg musculoskeletal geometry and sprint performance}, series = {Gait and Posture}, volume = {34}, journal = {Gait and Posture}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0966-6362}, doi = {10.1016/j.gaitpost.2011.03.009}, pages = {138 -- 141}, year = {2011}, abstract = {The purpose of this study was to investigate whether sprint performance is related to lower leg musculoskeletal geometry within a homogeneous group of highly trained 100-m sprinters. Using a cluster analysis, eighteen male sprinters were divided into two groups based on their personal best (fast: N = 11, 10.30 ± 0.07 s; slow: N = 7, 10.70 ± 0.08 s). Calf muscular fascicle arrangement and Achilles tendon moment arms (calculated by the gradient of tendon excursion versus ankle joint angle) were analyzed for each athlete using ultrasonography. Achilles tendon moment arm, foot and ankle skeletal geometry, fascicle arrangement as well as the ratio of fascicle length to Achilles tendon moment arm showed no significant (p > 0.05) correlation with sprint performance, nor were there any differences in the analyzed musculoskeletal parameters between the fast and slow sprinter group. Our findings provide evidence that differences in sprint ability in world-class athletes are not a result of differences in the geometrical design of the lower leg even when considering both skeletal and muscular components.}, language = {en} } @article{KetelhutKolditzGoelletal.2019, author = {Ketelhut, Maike and Kolditz, Melanie and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk}, title = {Admittance control of an industrial robot during resistance training}, series = {IFAC-PapersOnLine}, volume = {52}, journal = {IFAC-PapersOnLine}, number = {19}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2405-8963}, doi = {10.1016/j.ifacol.2019.12.102}, pages = {223 -- 228}, year = {2019}, abstract = {Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.}, language = {en} } @article{RichterBraunsteinWinnardetal.2017, author = {Richter, Charlotte and Braunstein, Bjoern and Winnard, Andrew and Nasser, Mona and Weber, T.}, title = {Human Biomechanical and Cardiopulmonary Responses to Partial Gravity - A Systematic Review}, series = {Frontiers in physiology}, journal = {Frontiers in physiology}, number = {8, article 583}, doi = {10.3389/fphys.2017.00583}, pages = {22 Seiten}, year = {2017}, language = {en} } @article{BertzSchoeningMolinnusetal.2024, author = {Bertz, Morten and Sch{\"o}ning, Michael Josef and Molinnus, Denise and Homma, Takayuki}, title = {Influence of temperature, light, and H₂O₂ concentration on microbial spore inactivation: in-situ Raman spectroscopy combined with optical trapping}, series = {Physica status solidi (a) applications and materials science}, journal = {Physica status solidi (a) applications and materials science}, number = {Early View}, publisher = {Wiley-VCH}, address = {Berlin}, issn = {1862-6319 (Online)}, doi = {10.1002/pssa.202300866}, pages = {8 Seiten}, year = {2024}, abstract = {To gain insight on chemical sterilization processes, the influence of temperature (up to 70 °C), intense green light, and hydrogen peroxide (H₂O₂) concentration (up to 30\% in aqueous solution) on microbial spore inactivation is evaluated by in-situ Raman spectroscopy with an optical trap. Bacillus atrophaeus is utilized as a model organism. Individual spores are isolated and their chemical makeup is monitored under dynamically changing conditions (temperature, light, and H₂O₂ concentration) to mimic industrially relevant process parameters for sterilization in the field of aseptic food processing. While isolated spores in water are highly stable, even at elevated temperatures of 70 °C, exposure to H₂O₂ leads to a loss of spore integrity characterized by the release of the key spore biomarker dipicolinic acid (DPA) in a concentration-dependent manner, which indicates damage to the inner membrane of the spore. Intensive light or heat, both of which accelerate the decomposition of H₂O₂ into reactive oxygen species (ROS), drastically shorten the spore lifetime, suggesting the formation of ROS as a rate-limiting step during sterilization. It is concluded that Raman spectroscopy can deliver mechanistic insight into the mode of action of H₂O₂-based sterilization and reveal the individual contributions of different sterilization methods acting in tandem.}, language = {en} } @article{NehrBausCinaretal.2024, author = {Nehr, Sascha and Baus, Lukas and {\c{C}}inar, Hasan and Elsen, Ingo and Frauenrath, Tobias}, title = {Indoor environmental quality assessment in passively ventilated classrooms in Germany and estimation of ventilation energy losses}, series = {Journal of Building Engineering}, volume = {97}, journal = {Journal of Building Engineering}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2352-7102}, pages = {20 Seiten}, year = {2024}, abstract = {In this field study we present an approach for the comprehensive and room-specific assessment of parameters with the overall aim to realize energy-efficient provision of hygienically harmless and thermally comfortable indoor environmental quality in naturally ventilated non-residential buildings. The approach is based on (i) conformity assessment of room design parameters, (ii) empirical determination of theoretically expected occupant-specific supply air flow rates and corresponding air exchange rates, (iii) experimental determination of real occupant-specific supply air flow rates and corresponding air exchange rates, (iv) measurement of indoor environmental exposure conditions of T, RH, cCO2 , cPM2.5 and cTVOC, and (v) determination of real energy demands for the prevailing ventilation scheme. Underlying assessment criteria comprise the indoor environmental parameters of category II of EN 16798-1: Temperature T = 20 ◦C-24 ◦C, and relative humidity RH = 25 \%-60 \% as well as the guide values of the German Federal Environment Agency for cCO2 cPM2.5 and cTVOC of 1000 ppm, 15 μg m⁻³, and 1 mg m ⁻³, respectively. Investigation objects are six naturally ventilated classrooms of a German secondary school. Major factors influencing indoor environmental quality in these classrooms are the specific room volume per occupant and the window opening area. It is concluded that the rigorous implementation of ventilation recommendations laid down by the German Federal Environment Agency is ineffective with respect to anticipated indoor environmental parameters and inefficient with respect to ventilation energy losses on the order of about 10 kWh m⁻² a ⁻¹ to 30 kWh m⁻² a ⁻¹.}, language = {en} } @article{GollandKriegesmann2023, author = {Golland, Alexander and Kriegesmann, Torben}, title = {Zivilprozessuale Fragen zum datenschutzrechtlichen Schadensersatzanspruch}, series = {MMR - Zeitschrift f{\"u}r IT-Recht und Recht der Digitalisierung}, journal = {MMR - Zeitschrift f{\"u}r IT-Recht und Recht der Digitalisierung}, number = {10}, publisher = {Beck}, address = {M{\"u}nchen}, issn = {2698-7988}, pages = {733 -- 739}, year = {2023}, abstract = {Im Verfahren gegen die {\"O}sterreichische Post AG (Rs. C-300/21) befasste sich der EuGH erstmals mit dem in Art. 82 DS-GVO geregelten datenschutzrechtlichen Schadensersatzanspruch. Mit den Klarstellungen des EuGH verschieben sich die Probleme nun st{\"a}rker zu den „klassischen" Fragen des Schadensersatzrechts im Zivilprozess. Relevant sind dabei vor allem Aspekte der Darlegungs- und Beweislast und deren Besonderheiten mit Blick auf den Ersatz immaterieller Sch{\"a}den. Der Beitrag fokussiert sich auf die Voraussetzungen und den dabei zu f{\"u}hrenden Tatsachenbeweis bei der Klage des Betroffenen gegen den Verantwortlichen auf Ersatz immaterieller Sch{\"a}den.}, language = {de} } @article{MorenoiCodinachsKloockSchoeningetal.2008, author = {Moreno i Codinachs, Lia and Kloock, Joachim P. and Sch{\"o}ning, Michael Josef and Baldi, Antoni and Ipatov, Andrey and Bratov, Andrey V. and Jimenez-Jorquera, Cecilia}, title = {Electronic integrated multisensor tongue applied to grape juice and wine analysis}, series = {Analyst. 133 (2008)}, journal = {Analyst. 133 (2008)}, isbn = {1364-5528}, pages = {1440 -- 1448}, year = {2008}, language = {en} } @article{Golland2023, author = {Golland, Alexander}, title = {Kompetenz nationaler Wettbewerbsbeh{\"o}rden zur Feststellung eines Verstoßes gegen die DS-GVO}, series = {MMR - Zeitschrift f{\"u}r IT-Recht und Recht der Digitalisierung}, journal = {MMR - Zeitschrift f{\"u}r IT-Recht und Recht der Digitalisierung}, number = {9}, publisher = {Beck}, address = {M{\"u}nchen}, pages = {680 -- 683}, year = {2023}, language = {de} } @article{TixGotthardtBodeetal.2024, author = {Tix, Julian and Gotthardt, Leon and Bode, Joshua and Karabacak, Burak and Nordmann, Janne and Hengsbach, Jan-Niklas and Ulber, Roland and Tippk{\"o}tter, Nils}, title = {Enhancement of succinic acid production by Actinobacillus succinogenes in an electro-bioreactor}, series = {Fermentation}, volume = {10}, journal = {Fermentation}, number = {10}, publisher = {MDPI}, address = {Basel}, issn = {2311-5637}, doi = {10.3390/fermentation10100504}, year = {2024}, abstract = {This work examines the electrochemically enhanced production of succinic acid using the bacterium Actinobacillus succinogenes. The principal objective is to enhance the metabolic potential of glucose and CO2 utilization via the C4 pathway in order to synthesize succinic acid. We report on the development of an electro-bioreactor system to increase succinic acid production in a power-2-X approach. The use of activated carbon fibers as electrode surfaces and contact areas allows A. succinogenes to self-initiate biofilm formation. The integration of an electrical potential into the system shifts the redox balance from NAD+ to NADH, increasing the efficiency of metabolic processes. Mediators such as neutral red facilitate electron transfer within the system and optimize the redox reactions that are crucial for increased succinic acid production. Furthermore, the role of carbon nanotubes (CNTs) in electron transfer was investigated. The electro-bioreactor system developed here was operated in batch mode for 48 h and showed improvements in succinic acid yield and concentration. In particular, a run with 100 µM neutral red and a voltage of -600 mV achieved a yield of 0.7 gsuccinate·gglucose-1. In the absence of neutral red, a higher yield of 0.72 gsuccinate·gglucose-1 was achieved, which represents an increase of 14\% compared to the control. When a potential of -600 mV was used in conjunction with 500 µg∙L-1 CNTs, a 21\% increase in succinate concentration was observed after 48 h. An increase of 33\% was achieved in the same batch by increasing the stirring speed. These results underscore the potential of the electro-bioreactor system to markedly enhance succinic acid production.}, language = {en} } @article{ZiemonsAuffrayBarbieretal.2005, author = {Ziemons, Karl and Auffray, Etiennette and Barbier, R{\´e}mi and Brandenburg, G. and Bruyndonckx, Peter and Choi, Yong and Christ, Daniela and Costes, Nicolas and D{\´e}clais, Yves R. A. and Devroede, Olivier and Dujardin, Christophe and Fedorovd, A. and Heinrichs, U. and Korzhik, Mikhail V. and Krieguer, Magalie and Kuntner, Claudia and Largeron, G. and Lartizien, Carole and Larue, H. and Lecoq, Paul R. and Vieira, Jean Marc}, title = {The ClearPET™ project: Development of a 2nd generation high-performance small animal PET scanner}, series = {Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment}, volume = {537}, journal = {Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment}, number = {1-2}, issn = {0168-9002}, pages = {307 -- 311}, year = {2005}, abstract = {Second generation high-performance PET scanners, called ClearPET™1, have been developed by working groups of the Crystal Clear Collaboration (CCC). High sensitivity and high spatial resolution for the ClearPET camera is achieved by using a phoswich arrangement combining two different types of lutetium-based scintillator materials: LSO from CTI and LuYAP:Ce from the CCC (ISTC project). In a first ClearPET prototype, phoswich arrangements of 8×8 crystals of 2×2×10 mm3 are coupled to multi-channel photomultiplier tubes (Hamamatsu R7600). A unit of four PMTs arranged in-line represents one of 20 sectors of the ring design. The opening diameter of the ring is 120 mm, the axial detector length is 110 mm.The PMT pulses are digitized by free-running ADCs and digital data processing determines the gamma energy, the phoswich layer and even the exact pulse starting time, which is subsequently used for coincidence detection. The gantry allows rotation of the detector modules around the field of view. Preliminary data shows a correct identification of the crystal layer about (98±1)\%. Typically the energy resolution is (23.3±0.5)\% for the luyap layer and (15.4±0.4)\% for the lso layer. early studies showed the timing resolution of 2 ns FWHM and 4.8 ns FWTM. the intrinsic spatial resolution ranges from 1.37 mm to 1.61 mm full-width of half-maximum (FWHM) with a mean of 1.48 mm FWHM. further improvements in image and energy resolution are expected when the system geometry is fully modeled.}, language = {en} } @article{AuffrayBruyndonckxDevroedeetal.2004, author = {Auffray, Etiennette and Bruyndonckx, Peter and Devroede, Olivier and Fedorov, Andrei A. and Ziemons, Karl and Heinrichs, U. and Korjik, Mikhail V. and Krieguer, Magalie and Kuntner, Claudia and Lartizien, Carole and Lecoq, Paul R. and L{\´e}onard, Sophie M. A. and Morel, Christian and Mosset, Jean-Baptiste and P{\´e}drini, Christian and Petrosian, A. G. and Pietrzyk, Uwe K. and Rey, Martin and Saladino, S. and Sappey-Marinier, D. and Simon, Luc}, title = {The ClearPET project}, series = {Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment}, volume = {527}, journal = {Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment}, number = {1-2}, isbn = {0168-9002}, pages = {171 -- 174}, year = {2004}, abstract = {The Crystal Clear Collaboration has designed and is building a high-resolution small animal PET scanner. The design is based on the use of the Hamamatsu R7600-M64 multi-anode photomultiplier tube and a LSO/LuYAP phoswich matrix with one to one coupling between the crystals and the photo-detector. The complete system will have 80 PM tubes in four rings with an inner diameter of 137 mm and an axial field of view of 110 mm. The PM pulses are digitized by free-running ADCs and digital data processing determines the gamma energy, the phoswich layer and even the pulse arrival time. Single gamma interactions are recorded and coincidences are found by software. The gantry allows rotation of the detector modules around the field of view. Simulations, and measurements a 2×4 module test set-up predict a spatial resolution of 1.5 mm in the centre of the field of view and a sensitivity of 5.9\% for a point source in the centre of the field of view.}, language = {en} } @article{ChwallekNawrathKrastinaetal.2024, author = {Chwallek, Constanze and Nawrath, Lara and Krastina, Anzelika and Bruksle, Ieva}, title = {Supportive research on sustainable entrepreneurship and business practices}, series = {SECA Sustainable Entrepreneurship for Climate Action}, journal = {SECA Sustainable Entrepreneurship for Climate Action}, number = {3}, publisher = {Lapland University of Applied Sciences Ltd}, address = {Rovaniemi}, isbn = {978-952-316-514-4 (pdf)}, issn = {2954-1654 (on-line publication)}, pages = {67 Seiten}, year = {2024}, language = {en} } @article{BraunChengDoweyetal.2021, author = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg F.}, title = {Performance evaluation of skill-based order-assignment in production environments with multi-agent systems}, series = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, journal = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, number = {Early Access}, publisher = {IEEE}, address = {New York}, issn = {2687-9735}, doi = {10.1109/JESTIE.2021.3108524}, year = {2021}, abstract = {The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.}, language = {en} } @article{WollertKruseVedral2007, author = {Wollert, J{\"o}rg F. and Kruse, Thomas and Vedral, Andreas}, title = {Die Kraft der drei Antennen : zuverl{\"a}ssige Funkkommunikation f{\"u}r die Automatisierungstechnik}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, volume = {56}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, number = {Sonderh. 2}, issn = {0013-5658; 1611-5120}, pages = {36 -- 42}, year = {2007}, language = {de} } @article{Wollert1999, author = {Wollert, J{\"o}rg F.}, title = {Betriebssysteme im Wettlauf : Elan-Entwicklungsboard mit Win CE und QNX}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 48}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 11}, issn = {0013-5658}, pages = {86 -- 91}, year = {1999}, language = {de} } @article{UlmerBraunChengetal.2022, author = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg F.}, title = {Gamification of virtual reality assembly training: Effects of a combined point and level system on motivation and training results}, series = {International Journal of Human-Computer Studies}, volume = {165}, journal = {International Journal of Human-Computer Studies}, number = {Art. No. 102854}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1071-5819}, doi = {10.1016/j.ijhcs.2022.102854}, year = {2022}, abstract = {Virtual Reality (VR) offers novel possibilities for remote training regardless of the availability of the actual equipment, the presence of specialists, and the training locations. Research shows that training environments that adapt to users' preferences and performance can promote more effective learning. However, the observed results can hardly be traced back to specific adaptive measures but the whole new training approach. This study analyzes the effects of a combined point and leveling VR-based gamification system on assembly training targeting specific training outcomes and users' motivations. The Gamified-VR-Group with 26 subjects received the gamified training, and the Non-Gamified-VR-Group with 27 subjects received the alternative without gamified elements. Both groups conducted their VR training at least three times before assembling the actual structure. The study found that a level system that gradually increases the difficulty and error probability in VR can significantly lower real-world error rates, self-corrections, and support usages. According to our study, a high error occurrence at the highest training level reduced the Gamified-VR-Group's feeling of competence compared to the Non-Gamified-VR-Group, but at the same time also led to lower error probabilities in real-life. It is concluded that a level system with a variable task difficulty should be combined with carefully balanced positive and negative feedback messages. This way, better learning results, and an improved self-evaluation can be achieved while not causing significant impacts on the participants' feeling of competence.}, language = {en} } @article{UlmerBraunChengetal.2023, author = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg F.}, title = {A human factors-aware assistance system in manufacturing based on gamification and hardware modularisation}, series = {International Journal of Production Research}, journal = {International Journal of Production Research}, publisher = {Taylor \& Francis}, issn = {0020-7543 (Print)}, doi = {10.1080/00207543.2023.2166140}, year = {2023}, abstract = {Assistance systems have been widely adopted in the manufacturing sector to facilitate various processes and tasks in production environments. However, existing systems are mostly equipped with rigid functional logic and do not provide individual user experiences or adapt to their capabilities. This work integrates human factors in assistance systems by adjusting the hardware and instruction presented to the workers' cognitive and physical demands. A modular system architecture is designed accordingly, which allows a flexible component exchange according to the user and the work task. Gamification, the use of game elements in non-gaming contexts, has been further adopted in this work to provide level-based instructions and personalised feedback. The developed framework is validated by applying it to a manual workstation for industrial assembly routines.}, language = {en} } @article{UlmerBraunChengetal.2020, author = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg F.}, title = {Human-Centered Gamification Framework for Manufacturing Systems}, series = {Procedia CIRP}, volume = {93}, journal = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2020.04.076}, pages = {670 -- 675}, year = {2020}, abstract = {While bringing new opportunities, the Industry 4.0 movement also imposes new challenges to the manufacturing industry and all its stakeholders. In this competitive environment, a skilled and engaged workforce is a key to success. Gamification can generate valuable feedbacks for improving employees' engagement and performance. Currently, Gamification in workspaces focuses on computer-based assignments and training, while tasks that require manual labor are rarely considered. This research provides an overview of Enterprise Gamification approaches and evaluates the challenges. Based on that, a skill-based Gamification framework for manual tasks is proposed, and a case study in the Industry 4.0 model factory is shown.}, language = {en} } @article{Wollert1998, author = {Wollert, J{\"o}rg F.}, title = {Alles automatisch : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung}, series = {Elektrotechnik f{\"u}r die Automatisierung}, volume = {Bd. 80}, journal = {Elektrotechnik f{\"u}r die Automatisierung}, number = {H. 4}, issn = {0013-581X}, pages = {196 -- 199}, year = {1998}, language = {de} } @article{ZiemonsBruyndonckxPerezetal.2008, author = {Ziemons, Karl and Bruyndonckx, Peter and Perez, Jose M. and Pietrzyk, Uwe and Rato, P. and Tavernier, Stefaan}, title = {Beyond ClearPET: Next Aims}, series = {5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008}, journal = {5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008}, isbn = {978-1-4244-2003-2}, pages = {1421 -- 1424}, year = {2008}, abstract = {The CRYSTAL CLEAR collaboration, in short CCC, is a consortium of 12 academic institutions, mainly from Europe, joining efforts in the area of developing instrumentation for nuclear medicine and medical imaging. In the framework of the CCC a high performance small animal PET system, called ClearPET, was developed by using new technologies in electronics and crystals in a phoswich arrangement combining two types of lutetium- based scintillator materials: LSO:Ce and LuYAP:Ce. Our next aim will be the development of hybrid image systems. Hybrid MR-PET imaging has many unique advantages for brain research. This has sparked a new research line within CCC for the development of novel MR-PET compatible technologies. MRI is not as sensitive as PET but PET has poorer spatial resolution than MRI. Two major advantages of PET are sensitivity and its ability to acquire metabolic information. To assess these innovations, the development of a 9.4T hybrid animal MR-PET scanner is proposed based on an existing 9.4T MR scanner that will be adapted to enable simultaneous acquisition of MR and PET data using cutting- edge technology for both MR and PET.}, language = {en} } @article{WedrowskiBruyndonckxTavernieretal.2009, author = {Wedrowski, Mateusz and Bruyndonckx, Peter and Tavernier, Stefaan and Zhi, Li and Dang, Jun and Mendes, Pedro Rato and Perez, Jose Manuel and Ziemons, Karl}, title = {Robustness of neural networks algorithm for gamma detection in monolithic block detector, positron emission tomography}, series = {2009 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)}, journal = {2009 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)}, isbn = {1082-3654}, pages = {2625 -- 2628}, year = {2009}, abstract = {The monolithic scintillator block approach for gamma detection in the Positron Emission Tomography (PET) avoids estimating Depth of Interaction (DOI), reduces dead zones in detector and diminishes costs of detector production. Neural Networks (NN) are very efficient to determine the entrance point of a gamma incident on a scintillator block. This paper presents results on the robustness of the spatial resolution as a function of the random fraction in the data, temperature and HV fluctuations. This is important when implementing the method in a real scanner. Measurements were done with two Hamamatsu S8550 APD arrays, glued on a 20 {\~A}— 20 {\~A}— 10 mm3 monolithic LSO crystal block.}, language = {en} } @article{UlberTippkoetterBuchholzetal.2008, author = {Ulber, Roland and Tippk{\"o}tter, Nils and Buchholz, Heinrich and Demmer, W. and Scheper, T.}, title = {Innovative Verfahren in der Molkeaufarbeitung zur Gewinnung neuer Produkte}, series = {Deutsche Milchwirtschaft}, volume = {59}, journal = {Deutsche Milchwirtschaft}, number = {19}, issn = {0012-0480}, pages = {704 -- 706}, year = {2008}, language = {de} } @article{HoffschmidtBuckFendetal.2001, author = {Hoffschmidt, Bernhard and Buck, Reiner and Fend, Thomas and Pitz-Paal, Robert and Rietbrock, P.}, title = {Porous materials as volumetric solar receivers : experimental approach towards a detailed characterisation of instability problems / R. Buck ; T. Fend ; B. Hoffschmidt ...}, series = {Forschungsbericht : DLR FB. 10 (2001)}, journal = {Forschungsbericht : DLR FB. 10 (2001)}, isbn = {0939-2963}, pages = {71 -- 72}, year = {2001}, language = {en} } @article{Wollert2001, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 8: Anwendungs-Profile}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 50}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 25}, issn = {0013-5658}, pages = {66 -- 73}, year = {2001}, language = {de} } @article{Wollert2007, author = {Wollert, J{\"o}rg F.}, title = {Wireless in industriellen Anwendungen}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Scout : Leitfaden f{\"u}r Elektronik-Entwickler}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Scout : Leitfaden f{\"u}r Elektronik-Entwickler}, issn = {1863-3420}, pages = {40 -- 46}, year = {2007}, language = {de} } @article{LeidingerNoistenWollert2012, author = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg F.}, title = {Realtime automation networks in moVing industrial environments}, series = {Journal of systemics, cybernetics and informatics}, volume = {10}, journal = {Journal of systemics, cybernetics and informatics}, number = {2}, publisher = {IIIC}, address = {Orlando}, issn = {1690-4532}, pages = {52 -- 56}, year = {2012}, abstract = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.}, language = {en} } @article{WollertFiedler1996, author = {Wollert, J{\"o}rg F. and Fiedler, J{\"o}rg}, title = {atp-Marktanalyse Echtzeitbetriebssysteme}, series = {Automatisierungstechnische Praxis : atp ; Praxis der Meß-, Steuerungs-, Regelungs- und Informationstechnik mit Softwaretechnik}, volume = {Bd. 38}, journal = {Automatisierungstechnische Praxis : atp ; Praxis der Meß-, Steuerungs-, Regelungs- und Informationstechnik mit Softwaretechnik}, number = {H. 1}, issn = {0340-4730}, pages = {33 -- 44}, year = {1996}, language = {de} } @article{Wollert1998, author = {Wollert, J{\"o}rg F.}, title = {Die Produktionslogistik der Front- und Heckmodule f{\"u}r die Smart-Montage in Hambach}, series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik}, journal = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik}, issn = {0930-7834}, pages = {48 -- 51}, year = {1998}, language = {de} } @article{HeineHerrmannSelmeretal.2014, author = {Heine, Andreas and Herrmann, Gloria and Selmer, Thorsten and Terwesten, Felix and Buckel, Wolfgang and Reuter, Klaus}, title = {High resolution crystal structure of clostridium propionicum β-Alanyl-CoA:Ammonia Lyase, a new member of the "Hot Dog Fold" protein superfamily}, series = {Proteins}, volume = {82}, journal = {Proteins}, number = {9}, publisher = {Wiley-Liss}, address = {New York}, issn = {1097-0134 (E-Journal); 0887-3585 (Print)}, doi = {10.1002/prot.24557}, pages = {2041 -- 2053}, year = {2014}, abstract = {Clostridium propionicum is the only organism known to ferment β-alanine, a constituent of coenzyme A (CoA) and the phosphopantetheinyl prosthetic group of holo-acyl carrier protein. The first step in the fermentation is a CoA-transfer to β-alanine. Subsequently, the resulting β-alanyl-CoA is deaminated by the enzyme β-alanyl-CoA:ammonia lyase (Acl) to reversibly form ammonia and acrylyl-CoA. We have determined the crystal structure of Acl in its apo-form at a resolution of 0.97 {\AA} as well as in complex with CoA at a resolution of 1.59 {\AA}. The structures reveal that the enyzme belongs to a superfamily of proteins exhibiting a so called "hot dog fold" which is characterized by a five-stranded antiparallel β-sheet with a long α-helix packed against it. The functional unit of all "hot dog fold" proteins is a homodimer containing two equivalent substrate binding sites which are established by the dimer interface. In the case of Acl, three functional dimers combine to a homohexamer strongly resembling the homohexamer formed by YciA-like acyl-CoA thioesterases. Here, we propose an enzymatic mechanism based on the crystal structure of the Acl·CoA complex and molecular docking. Proteins 2014; 82:2041-2053. © 2014 Wiley Periodicals, Inc.}, language = {en} } @article{Wollert2001, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 3: Rund um den Bluetooth-Protokollstack}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 50}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 19}, issn = {0013-5658}, pages = {96 -- 103}, year = {2001}, language = {de} } @article{ValeroFelderKrameretal.2024, author = {Valero, Daniel and Felder, Stefan and Kramer, Matthias and Wang, Hang and Carrillo, Jos{\´e} M. and Pfister, Michael and Bung, Daniel Bernhard}, title = {Air-water flows}, series = {Journal of Hydraulic Research}, volume = {62}, journal = {Journal of Hydraulic Research}, number = {4}, publisher = {Taylor \& Francis}, issn = {0022-1686 (Print)}, doi = {10.1080/00221686.2024.2379482}, pages = {319 -- 339}, year = {2024}, abstract = {High Froude-number open-channel flows can entrain significant volumes of air, a phenomenon that occurs continuously in spillways, in free-falling jets and in hydraulic jumps, or as localized events, notably at the toe of hydraulic jumps or in plunging jets. Within these flows, turbulence generates millions of bubbles and droplets as well as highly distorted wavy air-water interfaces. This phenomenon is crucial from a design perspective, as it influences the behaviour of high-velocity flows, potentially impairing the safety of dam operations. This review examines recent scientific and engineering progress, highlighting foundational studies and emerging developments. Notable advances have been achieved in the past decades through improved sampling of flows and the development of physics-based models. Current challenges are also identified for instrumentation, numerical modelling and (up)scaling that hinder the formulation of fundamental theories, which are instrumental for improving predictive models, able to offer robust support for the design of large hydraulic structures at prototype scale.}, language = {en} } @article{GerigkBujnickiGanpoNkwenkwaetal.2002, author = {Gerigk, M. and Bujnicki, Robert and Ganpo-Nkwenkwa, E. and Bongaerts, Johannes and Sprenger, Georg A. and Takors, Ralf}, title = {Process control for enhanced L-phenylalanine production using different recombinant Escherichia coli strains}, series = {Biotechnology and bioengineering}, volume = {Vol. 80}, journal = {Biotechnology and bioengineering}, number = {Iss. 7}, issn = {1097-0290 (E-Journal); 0006-3592 (Print)}, pages = {746 -- 754}, year = {2002}, language = {en} } @article{SlabuRoethEngelmannetal.2019, author = {Slabu, Ioana and Roeth, Anjali A. and Engelmann, Ulrich M. and Wiekhorst, Frank and Buhl, Eva Miriam and Neumann, Ulf P. and Schmitz-Rode, Thomas}, title = {Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro}, series = {Nanotechnology}, volume = {30}, journal = {Nanotechnology}, number = {18}, issn = {1361-6528}, doi = {10.1088/1361-6528/ab033e}, pages = {184004}, year = {2019}, language = {en} } @article{Wollert2018, author = {Wollert, J{\"o}rg F.}, title = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0}, series = {Design \& Elektronik}, journal = {Design \& Elektronik}, publisher = {WEKA-Fachmedien}, address = {M{\"u}nchen}, isbn = {0933-8667}, year = {2018}, language = {de} } @article{ArtmannKelemenPorstetal.1998, author = {Artmann, Gerhard and Kelemen, Christina and Porst, Dariusz and B{\"u}ldt, Georg and Chien, Shu}, title = {Temperature transitions of protein properties in human red blood cells. Artmann, Gerhard Michael, Kelemen, Christina; Porst, D.; B{\"u}ldt, G.; Chien, S.}, series = {Biophysical Journal. 75 (1998), H. 6}, journal = {Biophysical Journal. 75 (1998), H. 6}, isbn = {1542-0086}, pages = {3179 -- 3183}, year = {1998}, language = {en} } @article{BuniatyanAbouzarMartirosyanetal.2010, author = {Buniatyan, Vahe Vazgen and Abouzar, Maryam H. and Martirosyan, Norayr W. and Schubert, J{\"u}rgen and Gevorgian, Spartak and Sch{\"o}ning, Michael Josef and Poghossian, Arshak}, title = {pH-sensitive properties of barium strontium titanate (BST) thin films prepared by pulsed laser deposition technique}, series = {Physica Status Solidi (A)}, volume = {207}, journal = {Physica Status Solidi (A)}, number = {4}, publisher = {Wiley-VCH}, address = {Berlin}, issn = {1862-6300}, doi = {10.1002/pssa.200983310}, pages = {824 -- 830}, year = {2010}, abstract = {pH-sensitive properties of barium strontium titanate (BST) high-k thin films as alternative gate material for field-effect capacitive (bio-)chemical sensors based on an electrolyte-insulator-semiconductor system have been investigated. The BST films of different compositions (Ba0.31Sr0.69TiO3, Ba0.25Sr0.75TiO3 and Mg-doped Ba0.8Sr0.2Mg0.1Ti0.9O3) were deposited by pulsed laser deposition technique from targets fabricated by self-propagating high-temperature synthesis. The realised sensors have been electrochemically characterised by means of impedance-spectroscopy, capacitance-voltage and constant-capacitance method. The sensors possess a Nernstian-like pH sensitivity in the concentration range between pH 3 and 11 with a response time of 5-10 s. An equivalent circuit model for the BST-based capacitive field-effect sensor is discussed.}, language = {en} } @article{BuniatyanMatirosyanAbouzaretal.2009, author = {Buniatyan, Vahe Vazgen and Matirosyan, N. and Abouzar, Maryam H. and Schubert, J. and Zander, W. and Gevorgian, S. and Sch{\"o}ning, Michael Josef and Poghossian, Arshak}, title = {Capacitive field-effect pH sensor based on an electrolyte-ferroelectric-insulator-semiconductor structure}, series = {SENSOR 2009 : : 14th International Conference on Sensors, Technologies, Electronics and Applications; N{\"u}rnberg, Germany, 26 - 28 May 2009; proceedings; [part of] Sensor + Test Conference 2009 / AMA, Fachverband f{\"u}r Sensorik e.V}, journal = {SENSOR 2009 : : 14th International Conference on Sensors, Technologies, Electronics and Applications; N{\"u}rnberg, Germany, 26 - 28 May 2009; proceedings; [part of] Sensor + Test Conference 2009 / AMA, Fachverband f{\"u}r Sensorik e.V}, publisher = {AMA Service}, address = {Wunstorf}, isbn = {9783981099355}, pages = {317 -- 322}, year = {2009}, language = {en} } @article{HacklMayerWeberetal.2017, author = {Hackl, Michael and Mayer, Katharina and Weber, Mareike and Staat, Manfred and van Riet, Roger and Burkhart, Klaus Josef and M{\"u}ller, Lars-Peter and Wegmann, Kilian}, title = {Plate osteosynthesis of proximal ulna fractures : a biomechanical micromotion analysis}, series = {The journal of hand surgery}, volume = {42}, journal = {The journal of hand surgery}, number = {10}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0363-5023}, doi = {10.1016/j.jhsa.2017.05.014}, pages = {834.e1 -- 834.e7}, year = {2017}, language = {en} } @article{Wollert1998, author = {Wollert, J{\"o}rg F.}, title = {Zwergen-Anatomie : Aufbau von und Entwicklung f{\"u}r Windows CE}, series = {C't : Magazin f{\"u}r Computertechnik}, journal = {C't : Magazin f{\"u}r Computertechnik}, number = {H. 8}, issn = {0724-8679}, pages = {148 -- 151}, year = {1998}, language = {de} } @article{HeptnerWollert2005, author = {Heptner, K. and Wollert, J{\"o}rg F.}, title = {FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik'}, series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik}, volume = {19}, journal = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik}, issn = {0930-7834}, pages = {58 -- 59}, year = {2005}, language = {de} } @article{StaatFioriniLensaetal.1997, author = {Staat, Manfred and Fiorini, Gian Luigi and Lensa, Werner von and Burgazzi, Luciano}, title = {Reliability Methods for Passive Safety Functions}, series = {Proceedings of the SMiRT 14 Post Conference Seminar No 18 on Passive Safety Features in Nuclear Installations}, journal = {Proceedings of the SMiRT 14 Post Conference Seminar No 18 on Passive Safety Features in Nuclear Installations}, address = {Pisa}, year = {1997}, language = {en} } @article{BuniatyanHuckPoghossianetal.2013, author = {Buniatyan, Vahe Vazgen and Huck, Christina and Poghossian, Arshak and Aroutiounian, V. M. and Sch{\"o}ning, Michael Josef}, title = {BaxSr1-x TiO3/pc-Si heterojunction capacitance}, series = {Armenian journal of physics}, volume = {6}, journal = {Armenian journal of physics}, number = {4}, publisher = {National Academy of Sciences of Armenia}, address = {Yerevan}, issn = {1829-1171}, pages = {188 -- 197}, year = {2013}, language = {en} } @article{BuniatyanHuckPoghossianetal.2013, author = {Buniatyan, Vahe Vazgen and Huck, Christina and Poghossian, Arshak and Aroutiounian, V. M. and Sch{\"o}ning, Michael Josef}, title = {BaxSr1-x TiO3/pc-Si heterojunction}, series = {Armenian journal of physics}, volume = {6}, journal = {Armenian journal of physics}, number = {4}, publisher = {National Academy of Sciences of Armenia}, address = {Yerevan}, issn = {1829-1171}, pages = {177 -- 187}, year = {2013}, language = {en} } @article{PrumeMuraltCalameetal.2007, author = {Prume, Klaus and Muralt, Paul and Calame, Florian and Schmitz-Kempen, Thorsten and Tiedke, Stephan}, title = {Piezoelectric thin films: evaluation of electrical and electromechanical characteristics for MEMS devices / Prume, K. ; Muralt, P. ; Calame, F. ; Schmitz-Kempen, T. ; Tiedke, S. ;}, series = {IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. 54 (2007), H. 1}, journal = {IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. 54 (2007), H. 1}, isbn = {0885-3010}, pages = {81 -- 14}, year = {2007}, language = {en} } @article{BuniatyanMatirosyanAbouzaretal.2009, author = {Buniatyan, Vahe Vazgen and Matirosyan, N. W. and Abouzar, Maryam H. and Sch{\"o}ning, Michael Josef and Poghossian, Arshak and Schubert, J. and Khachatryan, V. R. and Soukiassyan, G. R.}, title = {(Ba,Sr)TiO3 based electrolyte-insulator-semiconductor pHsensors: comparitive study}, series = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009}, journal = {Semiconductor micro- and nanoelectronics : Proceedings of the Seventh International Conference , Tsakhcadzor, Armenia July 3-5 2009}, pages = {71 -- 74}, year = {2009}, language = {en} } @article{StulpeBuschHellwig1993, author = {Stulpe, Werner and Busch, Paul and Hellwig, K.-E.}, title = {Classical Representations of Finite-Dimensional Quantum Mechanics. Busch, P.; Hellwig, K.-E.; Stulpe, W.}, series = {International Journal of Theoretical Physics. 32 (1993), H. 3}, journal = {International Journal of Theoretical Physics. 32 (1993), H. 3}, isbn = {1572-9575}, pages = {399 -- 405}, year = {1993}, language = {en} } @article{PlessmannWollertFiedler1995, author = {Pleßmann, K. W. and Wollert, J{\"o}rg F. and Fiedler, J{\"o}rg}, title = {Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision?}, series = {CIM-Management : Produkte, Strategien, Entscheidungshilfen}, volume = {11}, journal = {CIM-Management : Produkte, Strategien, Entscheidungshilfen}, number = {2}, issn = {0179-2679}, pages = {56 -- 60}, year = {1995}, language = {de} } @article{HuckPoghossianKerroumietal.2014, author = {Huck, Christina and Poghossian, Arshak and Kerroumi, Iman and Schusser, Sebastian and B{\"a}cker, Matthias and Zander, Willi and Schubert, J{\"u}rgen and Buniatyan, Vahe Vazgen and Martirosyan, Norayr W. and Wagner, Patrick and Sch{\"o}ning, Michael Josef}, title = {Multiparameter sensor chip with Barium Strontium Titanate as multipurpose material}, series = {Electroanalysis}, volume = {26}, journal = {Electroanalysis}, number = {5}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1521-4109 (E-Journal); 1040-0397 (Print)}, doi = {10.1002/elan.201400076}, pages = {980 -- 987}, year = {2014}, abstract = {It is well known that biochemical and biotechnological processes are strongly dependent and affected by a variety of physico-chemical parameters such as pH value, temperature, pressure and electrolyte conductivity. Therefore, these quantities have to be monitored or controlled in order to guarantee a stable process operation, optimization and high yield. In this work, a sensor chip for the multiparameter detection of three physico-chemical parameters such as electrolyte conductivity, pH and temperature is realized using barium strontium titanate (BST) as multipurpose material. The chip integrates a capacitively coupled four-electrode electrolyte-conductivity sensor, a capacitive field-effect pH sensor and a thin-film Pt-temperature sensor. Due to the multifunctional properties of BST, it is utilized as final outermost coating layer of the processed sensor chip and serves as passivation and protection layer as well as pH-sensitive transducer material at the same time. The results of testing of the individual sensors of the developed multiparameter sensor chip are presented. In addition, a quasi-simultaneous multiparameter characterization of the sensor chip in buffer solutions with different pH value and electrolyte conductivity is performed. To study the sensor behavior and the suitability of BST as multifunctional material under harsh environmental conditions, the sensor chip was exemplarily tested in a biogas digestate.}, language = {en} } @article{HuckPoghossianBaeckeretal.2014, author = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Chaudhuri, S. and Zander, W. and Schubert, J. and Begoyan, Vardges K. and Buniatyan, Vahe Vazgen and Wagner, P. and Sch{\"o}ning, Michael Josef}, title = {Capacitively coupled electrolyte-conductivity sensor based on high-k material of barium strontium titanate}, series = {Sensors and actuators. B: Chemical}, journal = {Sensors and actuators. B: Chemical}, number = {198}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1873-3077 (E-Journal); 0925-4005 (Print)}, doi = {10.1016/j.snb.2014.02.103}, pages = {102 -- 109}, year = {2014}, language = {en} } @article{PrumeTyholdtCalameetal.2007, author = {Prume, Klaus and Tyholdt, Frode and Calame, Florian and Raeder, Henrik and Muralt, Paul}, title = {Chemically derived seeding layer for {100}-textured PZT thin films / Tyholdt, F. ; Calame, F. ; Prume, K. ; Raeder, H. ; Muralt, P.}, series = {Journal of Electroceramics. 19 (2007), H. 4}, journal = {Journal of Electroceramics. 19 (2007), H. 4}, isbn = {1385-3449}, pages = {311 -- 314}, year = {2007}, language = {en} } @article{Wollert2007, author = {Wollert, J{\"o}rg F.}, title = {Funk f{\"u}r die Sicherheit auf vier R{\"a}dern : Chancen und Herausforderungen in der Fahrzeug-Umwelt-Kommunikation}, series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik}, journal = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik}, number = {H. 8}, issn = {1614-0125}, pages = {78 -- 83}, year = {2007}, language = {de} } @article{WollertFiedlerStockmann1994, author = {Wollert, J{\"o}rg F. and Fiedler, J{\"o}rg and Stockmann, T.}, title = {Automatisieren mit dem PC : was der Personal Computer kann und wo er passen muss}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {Nr. 6}, issn = {0013-5658}, pages = {76 -- 82}, year = {1994}, language = {de} } @article{Wollert1997, author = {Wollert, J{\"o}rg F.}, title = {Wieviel Echtzeit kann Windows?}, series = {IEE : elektrische Automatisierung und Antriebstechnik}, volume = {Jg. 42}, journal = {IEE : elektrische Automatisierung und Antriebstechnik}, number = {Nr. 9}, issn = {1434-2898}, pages = {30 -- 37}, year = {1997}, language = {de} } @article{PoghossianWeldenBuniatyanetal.2021, author = {Poghossian, Arshak and Welden, Rene and Buniatyan, Vahe Vazgen and Sch{\"o}ning, Michael Josef}, title = {An Array of On-Chip Integrated, Individually Addressable Capacitive Field-Effect Sensors with Control Gate: Design and Modelling}, series = {Sensors}, volume = {21}, journal = {Sensors}, number = {18}, publisher = {MDPI}, address = {Basel}, issn = {1424-8220}, doi = {10.3390/s21186161}, pages = {17}, year = {2021}, abstract = {The on-chip integration of multiple biochemical sensors based on field-effect electrolyte-insulator-semiconductor capacitors (EISCAP) is challenging due to technological difficulties in realization of electrically isolated EISCAPs on the same Si chip. In this work, we present a new simple design for an array of on-chip integrated, individually electrically addressable EISCAPs with an additional control gate (CG-EISCAP). The existence of the CG enables an addressable activation or deactivation of on-chip integrated individual CG-EISCAPs by simple electrical switching the CG of each sensor in various setups, and makes the new design capable for multianalyte detection without cross-talk effects between the sensors in the array. The new designed CG-EISCAP chip was modelled in so-called floating/short-circuited and floating/capacitively-coupled setups, and the corresponding electrical equivalent circuits were developed. In addition, the capacitance-voltage curves of the CG-EISCAP chip in different setups were simulated and compared with that of a single EISCAP sensor. Moreover, the sensitivity of the CG-EISCAP chip to surface potential changes induced by biochemical reactions was simulated and an impact of different parameters, such as gate voltage, insulator thickness and doping concentration in Si, on the sensitivity has been discussed.}, language = {en} } @article{PoghossianWernerBuniatyanetal.2017, author = {Poghossian, Arshak and Werner, Frederik and Buniatyan, Vahe Vazgen and Wagner, Torsten and Miamoto, K. and Yoshinobu, T. and Sch{\"o}ning, Michael Josef}, title = {Towards addressability of light-addressable potentiometric sensors: Shunting effect of non-illuminated region and cross-talk}, series = {Sensor and Actuators B: Chemical}, journal = {Sensor and Actuators B: Chemical}, number = {244}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0925-4005}, doi = {10.1016/j.snb.2017.01.047}, pages = {1071 -- 1079}, year = {2017}, abstract = {The LAPS (light-addressable potentiometric sensor) platform is one of the most attractive approaches for chemical and biological sensing with many applications ranging from pH and ion/analyte concentration measurements up to cell metabolism detection and chemical imaging. However, although it is generally accepted that LAPS measurements are spatially resolved, the light-addressability feature of LAPS devices has not been discussed in detail so far. In this work, an extended electrical equivalent-circuit model of the LAPS has been presented, which takes into account possible cross-talk effects due to the capacitive coupling of the non-illuminated region. A shunting effect of the non-illuminated area on the measured photocurrent and addressability of LAPS devices has been studied. It has been shown, that the measured photocurrent will be determined not only by the local interfacial potential in the illuminated region but also by possible interfacial potential changes in the non-illuminated region, yielding cross-talk effects. These findings were supported by the experimental investigations of a penicillin-sensitive multi-spot LAPS and a metal-insulator-semiconductor LAPS as model systems.}, language = {en} } @article{HuckPoghossianBaeckeretal.2014, author = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Schubert, J. and Zander, W. and Begoyan, Vardges K. and Buniatyan, Vahe Vazgen and Sch{\"o}ning, Michael Josef}, title = {Chemical sensors based on a high-k perovskite oxide of barium strontium titanate}, series = {Procedia Engineering}, volume = {87}, journal = {Procedia Engineering}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1877-7058}, doi = {10.1016/j.proeng.2014.11.258}, pages = {28 -- 31}, year = {2014}, abstract = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.}, language = {en} } @article{HuckPoghossianBaeckeretal.2015, author = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Kramer, Friederike and Begoyan, Vardges K. and Buniatyan, Vahe Vazgen and Sch{\"o}ning, Michael Josef}, title = {Multi-parameter sensing using high-k oxide of barium strontium titanate}, series = {Physica status solidi (a)}, volume = {212}, journal = {Physica status solidi (a)}, number = {6}, publisher = {Wiley}, address = {Weinheim}, issn = {1862-6319}, doi = {10.1002/pssa.201431911}, pages = {1259}, year = {2015}, abstract = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.}, language = {en} } @article{Wollert2017, author = {Wollert, J{\"o}rg F.}, title = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0}, series = {Design \& Elektronik}, journal = {Design \& Elektronik}, number = {12}, publisher = {WEKA-Fachmedien}, address = {Haar, M{\"u}nchen}, issn = {0933-8667}, pages = {38 -- 41}, year = {2017}, language = {de} } @article{Wollert1999, author = {Wollert, J{\"o}rg F.}, title = {Schlaue Produktion von smarten Autos : hinter der Smart-Produktion steckt ein innovatives Logistikkonzept}, series = {Technica}, volume = {Bd. 48}, journal = {Technica}, number = {H. 4}, issn = {0040-866X}, pages = {20 -- 23}, year = {1999}, language = {de} } @article{Wollert2001, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 4: Der Bluetooth Protokoll-Stack}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Jg. 50}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {Nr. 20}, issn = {0013-5658}, pages = {76 -- 81}, year = {2001}, language = {de} } @article{HuberStreblowMuelleretal.2014, author = {Huber, M. and Streblow, R. and M{\"u}ller, D. and Lange, S. and Joneleit, R. and Sefker, T. and Rau, Sebastian and Wollert, J{\"o}rg F.}, title = {Funksignal{\"u}bertragung in Luftleitungen}, series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik}, volume = {Bd. 65}, journal = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik}, number = {H. 7/8}, issn = {1436-5103}, pages = {36 -- 40}, year = {2014}, language = {de} } @article{FiedlerWollert1996, author = {Fiedler, J{\"o}rg and Wollert, J{\"o}rg F.}, title = {Zeitmeister : Echtzeitbetriebssysteme f{\"u}r Mikrocontroller}, series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen}, journal = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen}, number = {2}, issn = {0170-1827}, pages = {55 -- 59}, year = {1996}, language = {de} } @article{Wollert1998, author = {Wollert, J{\"o}rg F.}, title = {Komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung}, series = {Dhf : Intralogistik ; Fachzeitschrift f{\"u}r Intralogistik}, volume = {Bd. 44}, journal = {Dhf : Intralogistik ; Fachzeitschrift f{\"u}r Intralogistik}, number = {H. 1}, issn = {0723-7901}, pages = {14 -- 16}, year = {1998}, language = {de} } @article{UlmerGroeningerBraunetal.2020, author = {Ulmer, Jessica and Gr{\"o}ninger, Marc and Braun, Sebastian and Wollert, J{\"o}rg F.}, title = {AR Arbeitspl{\"a}tze: F{\"u}r hochflexible und skalierbare Produktionsumgebungen}, series = {atp Magazin}, volume = {62}, journal = {atp Magazin}, number = {10}, publisher = {Vulkan-Verlag}, address = {Essen}, issn = {2364-3137}, doi = {10.17560/atp.v62i10.2495}, year = {2020}, abstract = {Trotz fortschreitender Automatisierung bleiben manuelle T{\"a}tigkeiten ein wichtiger Baustein der Fertigung kundenindividueller Produkte. Um die Mitarbeiter(innen) zu unterst{\"u}tzen und um eine effiziente Arbeit zu erm{\"o}glichen, werden zunehmend auf Augmented Reality (AR) basierende Systeme eingesetzt. Die vorgestellte Arbeit konzentriert sich auf die Entwicklung ganzheitlicher AR-Arbeitspl{\"a}tze f{\"u}r den Einsatz in kleinen und mittleren Unternehmen (KMU). Das entwickelte AR- Handarbeitskonzept beinhaltet eine Just-in-time-Darstellung der Arbeitsaufgaben auf Werkst{\"u}cken mit automatisierter Fertigungskontrolle. Als Reaktion auf kurze Produktlebenszyklen und hohe Produktvielfalten sind alle Komponenten auf maximale Flexibilit{\"a}t ausgelegt. Ein Umr{\"u}sten auf neue Produkte kann innerhalb von Minuten erfolgen.}, language = {de} } @article{Wollert2014, author = {Wollert, J{\"o}rg F.}, title = {Der Embedded Wireless-Report}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, publisher = {WEKA-Fachmedien}, address = {Haar}, issn = {0013-5658}, pages = {18 -- 25}, year = {2014}, language = {de} } @article{Wollert1998, author = {Wollert, J{\"o}rg F.}, title = {Im Sog des Standards : Windows CE als Betriebssystem f{\"u}r Embedded Controller}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 47}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 9}, issn = {0013-5658}, pages = {40 -- 51}, year = {1998}, language = {de} } @article{Wollert2002, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 10: Alternative Technologien}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 51}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 2}, issn = {0013-5658}, pages = {50 -- 56}, year = {2002}, language = {de} } @article{Wollert2004, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth, WLAN and ZigBee f{\"u}r die Automatisierungstechnik}, series = {Etz : Elektrotechnik \& Automation}, volume = {Bd. 125}, journal = {Etz : Elektrotechnik \& Automation}, number = {H. 6}, issn = {0948-7387}, pages = {10 -- 18}, year = {2004}, language = {de} } @article{WollertBuda2009, author = {Wollert, J{\"o}rg F. and Buda, Aurel}, title = {Funkl{\"o}sungen im parallelen Betrieb}, series = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management}, journal = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management}, number = {H. 4}, publisher = {VDMA-Verl.}, address = {Frankfurt, M.}, issn = {1869-2745}, pages = {6 -- 8}, year = {2009}, language = {de} } @article{Wollert2014, author = {Wollert, J{\"o}rg F.}, title = {Feldbustechnologie}, series = {Factory : der Durchblick in der Technik}, journal = {Factory : der Durchblick in der Technik}, publisher = {WEKA-Industriemedien}, address = {Wien}, pages = {Publ. online}, year = {2014}, language = {de} } @article{Wollert2008, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth: Funk f{\"u}r alle(s)? : 10 Jahre Bluetooth: ein Technologie-{\"U}ber- und -Ausblick}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, number = {Okt.}, pages = {36 -- 43}, year = {2008}, language = {de} } @article{Wollert2001, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 5: Die Bluetooth-Host-Schnittstelle}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 50}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 22}, issn = {0013-5658}, pages = {60 -- 65}, year = {2001}, language = {de} } @article{Wollert1995, author = {Wollert, J{\"o}rg F.}, title = {Euros - 166 - Echtzeitentwicklungskit f{\"u}r den 80C166}, series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen}, journal = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen}, number = {H. 8}, issn = {0170-1827}, pages = {32 -- 34}, year = {1995}, language = {de} } @article{Wollert2008, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth in der Klemme}, series = {Computer \& Automation : Fachmedium der Automatisierungstechnik}, journal = {Computer \& Automation : Fachmedium der Automatisierungstechnik}, number = {H. 10}, issn = {1615-8512}, pages = {62 -- 67}, year = {2008}, language = {de} } @article{WollertLeidinger2010, author = {Wollert, J{\"o}rg F. and Leidinger, Rafael}, title = {Automation trifft Automotive : SPS in der Fahrzeugtechnik}, series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik}, journal = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik}, number = {4/5}, publisher = {WEKA Fachmedien}, address = {Haar}, issn = {1614-0125}, pages = {44 -- 48}, year = {2010}, abstract = {Eine SPS im Kraftfahrzeug? Das geht ja gar nicht - da gibt es doch all die Hersteller f{\"u}r Kfz-Steuerger{\"a}te, die konfigurierbare Hardware anbieten. Im Prinzip ja, aber leider sind gerade die Sensoren oder Aktoren nicht ansteuerbar, die der Entwickler genau f{\"u}r sein aktuelles Projekt ben{\"o}tigt. Dieser Beitrag gibt einen kleinen Einblick in neue M{\"o}glichkeiten des Rapid Prototyping f{\"u}r mechatronische Systeme auf der Basis von Speicherprogrammierbaren Steuerungen (SPS).}, language = {de} } @article{Wollert2000, author = {Wollert, J{\"o}rg F.}, title = {Ethernet in der Automatisierungstechnik ; 2: Grenzen und M{\"o}glichkeiten des industriellen Ethernet-Einsatzes}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 49}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 21}, issn = {0013-5658}, pages = {66 -- 75}, year = {2000}, language = {de} } @article{Wollert2009, author = {Wollert, J{\"o}rg F.}, title = {Funk-Suche : Lokalisierung und Ortsbestimmungs-Verfahren f{\"u}r mobile Systeme}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, number = {H. 2}, publisher = {Weka Fachmedien GmbH}, address = {Haar}, pages = {24 -- 27}, year = {2009}, language = {de} } @article{Wollert2001, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 1: Die Technik auf einen Blick}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 50}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 17}, issn = {0013-5658}, pages = {80 -- 84}, year = {2001}, language = {de} } @article{Wollert2001, author = {Wollert, J{\"o}rg F.}, title = {Bluetooth aktuell - Technik und Anwendungen ; 7: Angepasste Protokolle}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 50}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 24}, issn = {0013-5658}, pages = {66 -- 72}, year = {2001}, language = {de} } @article{Wollert2016, author = {Wollert, J{\"o}rg F.}, title = {Industrial Internet of Things : Seifenblase oder Revolution}, series = {Elektronik}, journal = {Elektronik}, number = {7}, publisher = {WEKA-Fachmedien}, address = {M{\"u}nchen}, issn = {0013-5658}, pages = {39 -- 45}, year = {2016}, language = {de} } @article{Wollert2002, author = {Wollert, J{\"o}rg F.}, title = {Vierzig Jahre Software-Desaster : zehn Regeln als R{\"u}stzeug, um die Herausforderung Software-Entwicklung zu meistern}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 51}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 25}, issn = {0013-5658}, pages = {110 -- 115}, year = {2002}, language = {de} } @article{Wollert1998, author = {Wollert, J{\"o}rg F.}, title = {F{\"u}r viele, viele bunte Smarties : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung}, series = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik}, volume = {30}, journal = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik}, number = {H. 6}, issn = {1430-9807}, pages = {30 -- 32}, year = {1998}, language = {de} } @article{Wollert1997, author = {Wollert, J{\"o}rg F.}, title = {Doping f{\"u}r den Betriebssystem-Kern : Echtzeit-L{\"o}sungen f{\"u}r Windows NT im Vergleich}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 46}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 20}, issn = {0013-5658}, pages = {46 -- 50}, year = {1997}, language = {de} } @article{Wollert1999, author = {Wollert, J{\"o}rg F.}, title = {Mit verwertbarem Aufwand : Portieren von Software auf Windows CE}, series = {Elektrotechnik f{\"u}r die Automatisierung}, journal = {Elektrotechnik f{\"u}r die Automatisierung}, issn = {0013-581X}, pages = {46 -- 47}, year = {1999}, language = {de} } @article{Wollert1997, author = {Wollert, J{\"o}rg F.}, title = {Voll im Bilde : Marktreport - Industrielle Bildverarbeitung}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, volume = {Bd. 46}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler}, number = {H. 2}, issn = {0013-5658}, pages = {62 -- 67}, year = {1997}, language = {de} } @article{Wollert1997, author = {Wollert, J{\"o}rg F.}, title = {Zeitweise : Windows NT und die Echtzeit}, series = {Elrad - Magazin f{\"u}r Elektronik und technische Rechneranwendungen}, journal = {Elrad - Magazin f{\"u}r Elektronik und technische Rechneranwendungen}, number = {H. 4}, issn = {0170-1827}, pages = {71 -- 73}, year = {1997}, language = {de} } @article{WollertVedralGrimmetal.2004, author = {Wollert, J{\"o}rg F. and Vedral, Andreas and Grimm, A. and Holtmann, M.}, title = {Bluetooth-Sicherheit : wie viel Pers{\"o}nlichkeit gebe ich preis?}, series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, volume = {Bd. 53}, journal = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme}, number = {Sonderh. M{\"a}rz}, issn = {0013-5658}, pages = {30 -- 35}, year = {2004}, language = {de} }