@inproceedings{PirovanoSeefeldtDachwaldetal.2015,
  author    = {Pirovano, Laura and Seefeldt, Patric and Dachwald, Bernd and Noomen, Ron},
  title     = {Attitude and orbital modeling of an uncontrolled solar-sail experiment in low-Earth orbit},
  series = {25th International Symposium on Space Flight Dynamics ISSFD},
  booktitle = {25th International Symposium on Space Flight Dynamics ISSFD},
  pages     = {1 -- 15},
  year      = {2015},
  abstract  = {Gossamer-1 is the first project of the three-step Gossamer roadmap, the purpose of which is to develop, prove and demonstrate that solar-sail technology is a safe and reliable propulsion technique for long-lasting and high-energy missions. This paper firstly presents the structural analysis performed on the sail to understand its elastic behavior. The results are then used in attitude and orbital simulations. The model considers the main forces and torques that a satellite experiences in low-Earth orbit coupled with the sail deformation. Doing the simulations for varying initial conditions in attitude and rotation rate, the results show initial states to avoid and maximum rotation rates reached for correct and faulty deployment of the sail. Lastly comparisons with the classic flat sail model are carried out to test the hypothesis that the elastic behavior does play a role in the attitude and orbital behavior of the sail},
  language  = {en}
}
@inproceedings{DoerenWernicke1983,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Auftragen von verschleißfesten stranggegossenen Hartlegierungen auf Kobaltbasis durch das WIG- und Gasschweißen},
  series = {Schweißen und Schneiden '83 = Welding and Cutting '83. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 83},
  booktitle = {Schweißen und Schneiden '83 = Welding and Cutting '83. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 83},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik},
  address   = {D{\"u}sseldorf},
  issn      = {3-87155-388-3},
  pages     = {109 -- 113},
  year      = {1983},
  language  = {de}
}
@inproceedings{RazenSpaeteMelissetal.1998,
  author    = {Razen, Manfred and Sp{\"a}te, Frank and Meliß, Michael and Breuer, Maria and Hubrich, J{\"o}rg and Rischert, Christa},
  title     = {Aus-, Fort- und Weiterbildung am Solar-Institut J{\"u}lich},
  series = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  booktitle = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  publisher = {Solar Promotion},
  address   = {M{\"u}nchen},
  organization    = {Deutsche Gesellschaft f{\"u}r Sonnenenergie},
  pages     = {1071 -- 1078},
  year      = {1998},
  language  = {de}
}
@inproceedings{KubalskiButenweg2015,
  author    = {Kubalski, T. and Butenweg, Christoph},
  title     = {Ausfachungsmauerwerk unter kombinierter seismischer Beanspruchung},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {117 -- 122},
  year      = {2015},
  language  = {de}
}
@inproceedings{PflugWahle1994,
  author    = {Pflug, J. and Wahle, Michael},
  title     = {Auslegung der CFK-Sandwich-Rumpfstruktur eines Hubschraubers mit der Methode der Finiten Elemente},
  series = {Basistechnologien f{\"u}r neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt ; 1994,3)},
  booktitle = {Basistechnologien f{\"u}r neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt ; 1994,3)},
  editor    = {B{\"u}rger, Gudrun},
  publisher = {DGLR},
  address   = {Bonn},
  pages     = {1135 -- 1144},
  year      = {1994},
  language  = {de}
}
@inproceedings{DuemmlerOetringerGoettsche2020,
  author    = {D{\"u}mmler, Andreas and Oetringer, Kerstin and G{\"o}ttsche, Joachim},
  title     = {Auslegungstool zur energieeffizienten K{\"u}hlung von Geb{\"a}uden},
  series = {DKV-Tagung 2020, AA IV},
  booktitle = {DKV-Tagung 2020, AA IV},
  pages     = {1 -- 12},
  year      = {2020},
  language  = {de}
}
@inproceedings{VeettilRakshitSchopenetal.2022,
  author    = {Veettil, Yadu Krishna Morassery and Rakshit, Shantam and Schopen, Oliver and Kemper, Hans and Esch, Thomas and Shabani, Bahman},
  title     = {Automated Control System Strategies to Ensure Safety of PEM Fuel Cells Using Kalman Filters},
  series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  editor    = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana},
  publisher = {Springer Nature},
  address   = {Singapore},
  isbn      = {978-981-19-3178-9},
  issn      = {2195-4356},
  doi       = {10.1007/978-981-19-3179-6_55},
  pages     = {296 -- 299},
  year      = {2022},
  abstract  = {Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer. Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench.},
  language  = {en}
}
@inproceedings{AyedStrieganKustereretal.2017,
  author    = {Ayed, Anis Haj and Striegan, Constantin J. D. and Kusterer, Karsten and Funke, Harald and Kazari, M. and Horikawa, Atsushi and Okada, Kunio},
  title     = {Automated design space exploration of the hydrogen fueled "Micromix" combustor technology},
  pages     = {1 -- 8},
  year      = {2017},
  abstract  = {Combined with the use of renewable energy sources for its production, Hydrogen represents a possible alternative gas turbine fuel for future low emission power generation. Due to its different physical properties compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for Dry Low NOx (DLN) Hydrogen combustion. This makes the development of new combustion technologies an essential and challenging task for the future of hydrogen fueled gas turbines. The newly developed and successfully tested "DLN Micromix" combustion technology offers a great potential to burn hydrogen in gas turbines at very low NOx emissions. Aiming to further develop an existing burner design in terms of increased energy density, a redesign is required in order to stabilise the flames at higher mass flows and to maintain low emission levels. For this purpose, a systematic design exploration has been carried out with the support of CFD and optimisation tools to identify the interactions of geometrical and design parameters on the combustor performance. Aerodynamic effects as well as flame and emission formation are observed and understood time- and cost-efficiently. Correlations between single geometric values, the pressure drop of the burner and NOx production have been identified as a result. This numeric methodology helps to reduce the effort of manufacturing and testing to few designs for single validation campaigns, in order to confirm the flame stability and NOx emissions in a wider operating condition field.},
  language  = {en}
}
@inproceedings{SildatkeKarwanniKraftetal.2020,
  author    = {Sildatke, Michael and Karwanni, Hendrik and Kraft, Bodo and Schmidts, Oliver and Z{\"u}ndorf, Albert},
  title     = {Automated Software Quality Monitoring in Research Collaboration Projects},
  series = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  booktitle = {ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops},
  doi       = {10.1145/3387940.3391478},
  pages     = {603 -- 610},
  year      = {2020},
  language  = {en}
}
@inproceedings{BlaneckBornheimGriegeretal.2022,
  author    = {Blaneck, Patrick Gustav and Bornheim, Tobias and Grieger, Niklas and Bialonski, Stephan},
  title     = {Automatic readability assessment of german sentences with transformer ensembles},
  series = {Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text},
  booktitle = {Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text},
  publisher = {Association for Computational Linguistics},
  address   = {Potsdam},
  doi       = {10.48550/arXiv.2209.04299},
  pages     = {57 -- 62},
  year      = {2022},
  abstract  = {Reliable methods for automatic readability assessment have the potential to impact a variety of fields, ranging from machine translation to self-informed learning. Recently, large language models for the German language (such as GBERT and GPT-2-Wechsel) have become available, allowing to develop Deep Learning based approaches that promise to further improve automatic readability assessment. In this contribution, we studied the ability of ensembles of fine-tuned GBERT and GPT-2-Wechsel models to reliably predict the readability of German sentences. We combined these models with linguistic features and investigated the dependence of prediction performance on ensemble size and composition. Mixed ensembles of GBERT and GPT-2-Wechsel performed better than ensembles of the same size consisting of only GBERT or GPT-2-Wechsel models. Our models were evaluated in the GermEval 2022 Shared Task on Text Complexity Assessment on data of German sentences. On out-of-sample data, our best ensemble achieved a root mean squared error of 0:435.},
  language  = {en}
}
@inproceedings{BudaSchuermannWollert2008,
  author    = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Automatische Generierung von Automatisierungsobjekten nach IEC 61131-3 zur einfachen Integration von Funkkomponenten in {\"u}bergeordnete Steuerungssysteme},
  series = {Wireless automation : funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)},
  booktitle = {Wireless automation : funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {Verein Deutscher Ingenieure / Kompetenzfeld Informationstechnik},
  isbn      = {978-3-18-092010-8 ; 3-18-092010-8},
  pages     = {75 -- 84},
  year      = {2008},
  language  = {de}
}
@inproceedings{EngemannWiesenKallweitetal.2018,
  author    = {Engemann, Heiko and Wiesen, Patrick and Kallweit, Stephan and Deshpande, Harshavardhan and Schleupen, Josef},
  title     = {Autonomous mobile manipulation using ROS},
  series = {Advances in Service and Industrial Robotics},
  booktitle = {Advances in Service and Industrial Robotics},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-61276-8},
  doi       = {10.1007/978-3-319-61276-8_43},
  pages     = {389 -- 401},
  year      = {2018},
  language  = {en}
}
@inproceedings{RokitanskyEhammerGraeupletal.2007,
  author    = {Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Rihacek, Christoph and Sajatovic, Miodrag},
  title     = {B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND},
  series = {IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas},
  booktitle = {IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-1108-5},
  pages     = {4D2-1 -- 4D2-13},
  year      = {2007},
  language  = {en}
}
@inproceedings{RokitanskyEhammerGraeupletal.2007,
  author    = {Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Rihacek, Christoph and Sajatovic, Miodrag},
  title     = {B-AMC - Aeronautical Broadband Communication in the L-Band},
  series = {First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2006 ; Bd. 3)},
  booktitle = {First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2006 ; Bd. 3)},
  publisher = {Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  organization    = {European Air and Space Conference <1, 2007, Berlin>},
  issn      = {0070-4083},
  pages     = {487 -- 496},
  year      = {2007},
  language  = {en}
}
@inproceedings{OPUS4-6272,
  title     = {B-AMC — broadband aeronautical multi-carrier communications},
  series = {Integrated Communications, Navigation and Surveillance Conference : [ICNS 2008] ; Bethesda, Md., 5 - 7 May 2008},
  booktitle = {Integrated Communications, Navigation and Surveillance Conference : [ICNS 2008] ; Bethesda, Md., 5 - 7 May 2008},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-2303-3 ; 978-1-4244-2304-0},
  pages     = {1 -- 12},
  year      = {2008},
  language  = {en}
}
@inproceedings{GligorevicBrandesCosovicetal.2005,
  author    = {Gligorevic, Snjezana and Brandes, Sinja and Cosovic, I. and Schnell, Michael},
  title     = {B-VHF, ein 'Overlay'-System f{\"u}r die ATC Kommunikation im VHF Band},
  series = {Motto: Luft- und Raumfahrt - Grenzen {\"u}berwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005},
  booktitle = {Motto: Luft- und Raumfahrt - Grenzen {\"u}berwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005},
  publisher = {DGLR},
  address   = {Bonn},
  organization    = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth},
  pages     = {951 -- 958},
  year      = {2005},
  language  = {de}
}
@inproceedings{BitzAlaydrusStreckertetal.2001,
  author    = {Bitz, Andreas and Alaydrus, M. and Streckert, J. and Hansen, V.W.},
  title     = {Base station antennas embedded in complex environments: rf exposure in controlled areas},
  series = {23rd BEMS Annual Meeting, St. Paul, Minnesota, USA, 49-50, June 2001},
  booktitle = {23rd BEMS Annual Meeting, St. Paul, Minnesota, USA, 49-50, June 2001},
  publisher = {Bioelectromagnetics Society},
  address   = {Frederick, MD},
  pages     = {49 -- 50},
  year      = {2001},
  language  = {en}
}
@inproceedings{FrantzBinderBuschetal.2020,
  author    = {Frantz, Cathy and Binder, Matthias and Busch, Konrad and Ebert, Miriam and Heinrich, Andreas and Kaczmarkiewicz, Nadine and Schl{\"o}gl-Knothe, B{\"a}rbel and Kunze, Tobias and Schuhbauer, Christian and Stetka, Markus and Schwager, Christian and Spiegel, Michael and Teixeira Boura, Cristiano Jos{\´e} and Bauer, Thomas and Bonk, Alexander and Eisen, Stefan and Funck, Bernhard},
  title     = {Basic Engineering of a High Performance Molten Salt Tower Receiver System},
  series = {Solar Paces 2020},
  booktitle = {Solar Paces 2020},
  pages     = {1 -- 10},
  year      = {2020},
  language  = {en}
}
@inproceedings{AbbasThurnKessleretal.2019,
  author    = {Abbas, Karim and Thurn, Laura and Kessler, Julia and Eichler, Fabian},
  title     = {Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01009},
  doi       = {10.1051/matecconf/201929901009},
  pages     = {8 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardtetal.2017,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings},
  series = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  booktitle = {The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - CoSME'16},
  edition   = {Vol. 94},
  doi       = {10.1051/matecconf/20179403008},
  pages     = {7 S.},
  year      = {2017},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardt2016,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas},
  title     = {Basic research on lattice structures focused on the strut shape and welding beads},
  series = {Physics Procedia},
  volume    = {Vol. 83},
  booktitle = {Physics Procedia},
  issn      = {1875-3884},
  doi       = {10.1016/j.phpro.2016.08.086},
  pages     = {833 -- 838},
  year      = {2016},
  language  = {en}
}
@inproceedings{RenaultButenwegMeskouris2006,
  author    = {Renault, Philippe and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Baudynamische Untersuchung von Br{\"u}ckenbauwerken im K{\"o}lner Raum},
  series = {Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)},
  booktitle = {Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb},
  isbn      = {3-18-091941-8},
  pages     = {121 -- 140},
  year      = {2006},
  language  = {de}
}
@inproceedings{KarvanekButenwegEbenau2002,
  author    = {Karvanek, Eva and Butenweg, Christoph and Ebenau, Carsten},
  title     = {Bautechnische Pr{\"u}fung und Bau{\"u}berwachung der Arena „Auf Schalke"},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 8 am 21. und 22. M{\"a}rz 2002 in Braunschweig / Hrsg. Dieter Dinkler},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 8 am 21. und 22. M{\"a}rz 2002 in Braunschweig / Hrsg. Dieter Dinkler},
  publisher = {TU Braunschweig, Institut f{\"u}r Statik},
  address   = {Braunschweig},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2002, Braunschweig>},
  isbn      = {3-926031-95-6},
  pages     = {237 -- 245},
  year      = {2002},
  language  = {de}
}
@inproceedings{PeekenBenner1985,
  author    = {Peeken, Heinz and Benner, Joachim},
  title     = {Beeintr{\"a}chtigung des Druckaufbaus in Gleitlagern durch Schmierstoffversch{\"a}umung},
  series = {Gleit- und W{\"a}lzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. M{\"a}rz 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)},
  booktitle = {Gleit- und W{\"a}lzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. M{\"a}rz 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)},
  isbn      = {3-18-090549-2},
  issn      = {0083-5560},
  pages     = {373 -- 397},
  year      = {1985},
  language  = {de}
}
@inproceedings{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Behaviour factor q for the seismic design of URM buildings},
  series = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology September 4 - September 9, 2022, Bucharest},
  editor    = {Arion, Christian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {1184 -- 1194},
  year      = {2022},
  abstract  = {Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.},
  language  = {en}
}
@inproceedings{ButenwegThierauf1999,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Bemessung und Kostenoptimierung von Stahlbetontragwerken},
  series = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)},
  booktitle = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)},
  publisher = {Balkema},
  address   = {Rotterdam},
  organization    = {Fachtagung Baustatik, Baupraxis <7, 1999, Aachen>},
  isbn      = {90-5809-044-2},
  pages     = {213 -- 220},
  year      = {1999},
  language  = {de}
}
@inproceedings{DammRitzStrauch2010,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Benutzerzentrierte Anforderungsanalyse f{\"u}r die Produktlinien-Entwicklung mobiler Unternehmenssoftware},
  series = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  booktitle = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  editor    = {Klink, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-266-6},
  pages     = {117 -- 130},
  year      = {2010},
  language  = {de}
}
@inproceedings{MichelAlderButenwegetal.2019,
  author    = {Michel, Philipp and Alder, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Berechnung der Fluid-Struktur-Interaktion f{\"u}r flexibel gelagerte Fl{\"u}ssigkeitstanks},
  series = {16. D-A-CH Tagung Erdbebeningenieurwesen \& Baudynamik: 26. und 27. September 2019, Universit{\"a}t Innsbruck},
  booktitle = {16. D-A-CH Tagung Erdbebeningenieurwesen \& Baudynamik: 26. und 27. September 2019, Universit{\"a}t Innsbruck},
  isbn      = {978-3-200-06454-6},
  year      = {2019},
  language  = {de}
}
@inproceedings{WahleZeleny1995,
  author    = {Wahle, Michael and Zeleny, R.},
  title     = {Berechnung von Elastomer-Bauteilen bei quasistatischer Belastung unter Ber{\"u}cksichtigung von Eigenkontakt und {\"a}ußeren Reibungseinfl{\"u}ssen},
  series = {13. CAD-FEM Users' Meeting : FEM-Technologietage, 25. - 27. Oktober 1995 in Bad Wildungen bei Kassel / [Hrsg.: CAD-FEM GmbH]},
  booktitle = {13. CAD-FEM Users' Meeting : FEM-Technologietage, 25. - 27. Oktober 1995 in Bad Wildungen bei Kassel / [Hrsg.: CAD-FEM GmbH]},
  address   = {Grafing b. M{\"u}nchen [u.a.]},
  pages     = {5 -- 6},
  year      = {1995},
  language  = {de}
}
@inproceedings{RosinButenweg2014,
  author    = {Rosin, Julia and Butenweg, Christoph},
  title     = {Berechnungsansatz f{\"u}r basisisolierte Tankbauwerke},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...},
  publisher = {Lehrstuhl f{\"u}r Statik, Techn. Univ. M{\"u}nchen},
  address   = {M{\"u}nchen},
  organization    = {Fachtagung Baustatik - Baupraxis <12, 2014, M{\"u}nchen>},
  isbn      = {978-3-00-041256-1},
  pages     = {103 -- 112},
  year      = {2014},
  language  = {de}
}
@inproceedings{HuckBaeckerPoghossianetal.2011,
  author    = {Huck, Christina and B{\"a}cker, Matthias and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Bifunktionaler Sensorchip f{\"u}r den Nachweis von Gel{\"o}stwasserstoff},
  isbn      = {978-3942710-53-4},
  doi       = {10.5162/10dss2011/16.10},
  pages     = {325 -- 328},
  year      = {2011},
  language  = {de}
}
@inproceedings{TippkoetterSchuenemannChristmannetal.2008,
  author    = {Tippk{\"o}tter, Nils and Sch{\"u}nemann, V. and Christmann, R. and Pasteur, A. and Schweizer, J. and Ulber, R.},
  title     = {Bioaffinity Layering magnetisierbarer Mikro- und Nanopartikel},
  series = {Technische Systeme f{\"u}r die Lebenswissenschaften : 14. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 22.09. - 24.09.2008},
  booktitle = {Technische Systeme f{\"u}r die Lebenswissenschaften : 14. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 22.09. - 24.09.2008},
  editor    = {Beckmann, Dieter},
  address   = {Heiligenstadt},
  isbn      = {978-3-00-025695-0},
  pages     = {97 -- 98},
  year      = {2008},
  language  = {de}
}
@inproceedings{StollenwerkRiekeDahmenetal.2016,
  author    = {Stollenwerk, Dominik and Rieke, C. and Dahmen, Markus and Pieper, Martin},
  title     = {Biogas Production Modelling : A Control System Engineering Approach},
  series = {IOP Conference Series: Earth and Environmental Science. Bd. 32},
  booktitle = {IOP Conference Series: Earth and Environmental Science. Bd. 32},
  issn      = {1755-1315},
  doi       = {10.1088/1755-1315/32/1/012008},
  pages     = {012008/1 -- 012008/4},
  year      = {2016},
  language  = {en}
}
@inproceedings{KasperSchiffelsKrafftetal.2016,
  author    = {Kasper, Katharina and Schiffels, Johannes and Krafft, Simone and Kuperjans, Isabel and Elbers, Gereon and Selmer, Thorsten},
  title     = {Biogas Production on Demand Regulated by Butyric Acid Addition},
  series = {IOP Conference Series: Earth and Environmental Science. Bd. 32},
  volume    = {32},
  booktitle = {IOP Conference Series: Earth and Environmental Science. Bd. 32},
  issn      = {1755-1315},
  doi       = {10.1088/1755-1315/32/1/012009},
  pages     = {012009/1 -- 012009/4},
  year      = {2016},
  language  = {en}
}
@inproceedings{Meliss1985,
  author    = {Meliß, Michael},
  title     = {Biomasse-Potential},
  series = {Energie aus Biomasse : Erfahrungen mit verschiedenen technischen L{\"o}sungen und Zukunftsaussichten; Tagungsbericht; [Fachtagung, 18. - 19. November 1985, Freising]},
  booktitle = {Energie aus Biomasse : Erfahrungen mit verschiedenen technischen L{\"o}sungen und Zukunftsaussichten; Tagungsbericht; [Fachtagung, 18. - 19. November 1985, Freising]},
  publisher = {Techn. Univ.},
  address   = {M{\"u}nchen},
  organization    = {International Solar Energy Society},
  pages     = {1 -- 30},
  year      = {1985},
  language  = {de}
}
@inproceedings{KahmannUschokWegmannetal.2018,
  author    = {Kahmann, Stephanie Lucina and Uschok, Stephan and Wegmann, Kilian and M{\"u}ller, Lars-P. and Staat, Manfred},
  title     = {Biomechanical multibody model with refined kinematics of the elbow},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {11 Seiten},
  year      = {2018},
  abstract  = {The overall objective of this study is to develop a new external fixator, which closely maps the native kinematics of the elbow to decrease the joint force resulting in reduced rehabilitation time and pain. An experimental setup was designed to determine the native kinematics of the elbow during flexion of cadaveric arms. As a preliminary study, data from literature was used to modify a published biomechanical model for the calculation of the joint and muscle forces. They were compared to the original model and the effect of the kinematic refinement was evaluated. Furthermore, the obtained muscle forces were determined in order to apply them in the experimental setup. The joint forces in the modified model differed slightly from the forces in the original model. The muscle force curves changed particularly for small flexion angles but their magnitude for larger angles was consistent.},
  language  = {en}
}
@inproceedings{JabbariBhattaraiAndingetal.2017,
  author    = {Jabbari, Medisa and Bhattarai, Aroj and Anding, Ralf and Staat, Manfred},
  title     = {Biomechanical simulation of different prosthetic meshes for repairing uterine/vaginal vault prolapse},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {118 -- 119},
  year      = {2017},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherStaat2015,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred},
  title     = {Biomechanical study of the female pelvic floor dysfunction using the finite element method},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@inproceedings{SchusserLeinhosPoghossianetal.2012,
  author    = {Schusser, Sebastian and Leinhos, Marcel and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Biopolymer-degradation monitoring by chip-­based impedance spectroscopy technique},
  series = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  booktitle = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  editor    = {Abdelghani, Adnane and Sch{\"o}ning, Michael Josef},
  pages     = {47 -- 47},
  year      = {2012},
  language  = {en}
}
@inproceedings{Tippkoetter2013,
  author    = {Tippk{\"o}tter, Nils},
  title     = {Biotechnologische Gewinnung von Wertstoffen aus Molke : BiobasedWorld - Innovation in food},
  series = {Biotechnica 2013 : European biotechnology science \& industry news},
  volume    = {12},
  booktitle = {Biotechnica 2013 : European biotechnology science \& industry news},
  number    = {9, special},
  pages     = {33 -- 50},
  year      = {2013},
  language  = {de}
}
@inproceedings{FuchsRitz2009,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Blended Shopping},
  series = {Mobile und ubiquit{\"a}re Informationssysteme - Entwicklung, Implementierung und Anwendung : Proceedings zur 4. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2009), 3. M{\"a}rz 2009 in M{\"u}nster, Germany. - (GI-Edition : Proceedings ; 146)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme - Entwicklung, Implementierung und Anwendung : Proceedings zur 4. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2009), 3. M{\"a}rz 2009 in M{\"u}nster, Germany. - (GI-Edition : Proceedings ; 146)},
  editor    = {Bick, Markus},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-240-6},
  pages     = {109 -- 122},
  year      = {2009},
  language  = {de}
}
@inproceedings{FuchsRitzHalbachetal.2011,
  author    = {Fuchs, Britta and Ritz, Thomas and Halbach, Bastian and Hartl, Florian},
  title     = {Blended shopping : interactivity and individualization},
  series = {Proceedings of the International Conference on e-Business : Seville, Spain, 18 - 21 July 2011 ; [... integrated in the ICETE (International Conference on e-Business and Telecommunications) joint conference]},
  booktitle = {Proceedings of the International Conference on e-Business : Seville, Spain, 18 - 21 July 2011 ; [... integrated in the ICETE (International Conference on e-Business and Telecommunications) joint conference]},
  editor    = {Marca, David A.},
  publisher = {SciTePress},
  address   = {[Lissabon]},
  isbn      = {978-989-8425-70-6},
  pages     = {47 -- 52},
  year      = {2011},
  language  = {en}
}
@inproceedings{TomicPennaDeJongetal.2020,
  author    = {Tomic, Igor and Penna, Andrea and DeJong, Matthew and Butenweg, Christoph and Senaldi, Ilaria and Guerrini, Gabriele and Malomo, Daniele and Beyer, Katrin},
  title     = {Blind predictions of shake table testing of aggregate masonry buildings},
  series = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  booktitle = {17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.},
  year      = {2020},
  abstract  = {In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The SERA project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) provides such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. With the aim to advance the modelling of unreinforced masonry aggregates, a blind prediction competition is organized before the experimental campaign. Each group has been provided a complete set of construction drawings, material properties, testing sequence and the list of measurements to be reported. The applied modelling approaches span from equivalent frame models to Finite Element models using shell elements and discrete element models with solid elements. This paper compares the first entries, regarding the modelling approaches, results in terms of base shear, roof displacements, interface openings, and the failure modes.},
  language  = {en}
}
@inproceedings{OertelBungSchlenkhoff2012,
  author    = {Oertel, Mario and Bung, Daniel B. and Schlenkhoff, Andreas},
  title     = {Blocksteinrampen in Riegelbauweise : Neue Bemessungsans{\"a}tze},
  series = {Staubauwerke : planen, bauen, betreiben; 35. Dresdner Wasserbaukolloquium 2012, 08. - 09. M{\"a}rz 2012},
  booktitle = {Staubauwerke : planen, bauen, betreiben; 35. Dresdner Wasserbaukolloquium 2012, 08. - 09. M{\"a}rz 2012},
  editor    = {Carstensen, Dirk},
  publisher = {Selbstverl. der Techn. Univ.},
  address   = {Dresden},
  organization    = {Technische Universit{\"a}t Dresden, Fakult{\"a}t Bauingenieurwesen},
  isbn      = {978-3-86780-261-1},
  pages     = {317 -- 326},
  year      = {2012},
  language  = {de}
}
@inproceedings{WollertVedral2005,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas},
  title     = {Bluetooth - Integrationstechnologie f{\"u}r automotive Anwendungen},
  series = {Begleittexte zum Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke : 20. April 2005, M{\"u}nchen-Dornach},
  booktitle = {Begleittexte zum Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke : 20. April 2005, M{\"u}nchen-Dornach},
  organization    = {Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke <2005, Aschheim-Dornach>},
  year      = {2005},
  language  = {de}
}
@inproceedings{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in Embedded-Anwendungen in der Automatisierungstechnik},
  series = {Tagungsband / SPS IPC Drives 2002 : 13. Fachmesse und Kongress, 26. - 28. November 2002 N{\"u}rnberg; elektrische Automatisierung - Systeme und Komponenten. (Praxiswissen IEE - Automatisierung)},
  booktitle = {Tagungsband / SPS IPC Drives 2002 : 13. Fachmesse und Kongress, 26. - 28. November 2002 N{\"u}rnberg; elektrische Automatisierung - Systeme und Komponenten. (Praxiswissen IEE - Automatisierung)},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {3-7785-2863-7},
  pages     = {28 -- 37},
  year      = {2002},
  language  = {de}
}
@inproceedings{BungHildebrandtOerteletal.2008,
  author    = {Bung, Daniel B. and Hildebrandt, Arndt and Oertel, Mario and Schlenkhoff, Andreas and Schlurmann, Torsten},
  title     = {Bore propagation over a submerged horizontal plate by physical and numerical simulation},
  series = {Coastal engineering 2008 : proceedings of the 31st international conference; Hamburg, Germany, 31 August - 5 September 2008 ; Vol. 4},
  booktitle = {Coastal engineering 2008 : proceedings of the 31st international conference; Hamburg, Germany, 31 August - 5 September 2008 ; Vol. 4},
  editor    = {McKee Smith, Jane},
  isbn      = {9814277401 ; 9789814277402},
  pages     = {3542 -- 3553},
  year      = {2008},
  language  = {en}
}
@inproceedings{EdipGarevskiButenwegetal.2014,
  author    = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sesov, Vlatko and Bojadjieva, Julijana and Gjorgjiev, Igor},
  title     = {Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon},
  series = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed},
  booktitle = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  organization    = {International Conference on Seismic Design of Industrial Facilities <2013, Aachen>},
  isbn      = {978-3-658-02809-1 (Print) ; 978-3-658-02810-7},
  doi       = {10.1007/978-3-658-02810-7_47},
  pages     = {569 -- 576},
  year      = {2014},
  language  = {en}
}
@inproceedings{SteuerDankertBergLeichtScholten2015,
  author    = {Steuer-Dankert, Linda and Berg, Tobias and Leicht-Scholten, Carmen},
  title     = {Breaking the habit - new approaches in engineering education},
  series = {Proceedings of the 43rd Annual Conference of the European Society for Engineering Education},
  booktitle = {Proceedings of the 43rd Annual Conference of the European Society for Engineering Education},
  isbn      = {978-2-87352-012-0},
  pages     = {11},
  year      = {2015},
  abstract  = {Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.},
  language  = {en}
}
@inproceedings{SajatovicRihacekHaindletal.2007,
  author    = {Sajatovic, Miodrag and Rihacek, Christoph and Haindl, Bernhard and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana},
  title     = {Broadband VHF (B-VHF) project achievements and follow-on activities},
  series = {Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007},
  booktitle = {Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {1-4244-1216-1},
  pages     = {1 -- 8},
  year      = {2007},
  language  = {en}
}
@inproceedings{SiegertIdingBaumannetal.2000,
  author    = {Siegert, Petra and Iding, Hans and Baumann, Martin and McLeish, Michael J. and Kenyon, George L. and Pohl, Martina},
  title     = {Broadening of the substrate spectra of two ThDP-dependent decarboxylases using site-directed-mutagenesis},
  series = {Proceedings of the 4th International Congress on Biochemical Engineering : 17 and 18 February 2000, Stuttgart},
  booktitle = {Proceedings of the 4th International Congress on Biochemical Engineering : 17 and 18 February 2000, Stuttgart},
  organization    = {International Congress on Biochemical Engineering <4, 2000, Stuttgart>},
  isbn      = {3-8167-5570-4},
  pages     = {38 -- 42},
  year      = {2000},
  language  = {en}
}
@inproceedings{GorzalkaDahlkeGoettscheetal.2018,
  author    = {Gorzalka, Philip and Dahlke, Dennis and G{\"o}ttsche, Joachim and Israel, Martin and Patel, Dhruvkumar and Prahl, Christoph and Schmiedt, Jacob Estevam and Frommholz, Dirk and Hoffschmidt, Bernhard and Linkiewicz, Magdalena},
  title     = {Building Tomograph-From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input},
  series = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  booktitle = {EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria},
  pages     = {17 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{ChristenBarteltKowalskietal.2008,
  author    = {Christen, Marc and Bartelt, Perry and Kowalski, Julia and Stoffel, Lukus},
  title     = {Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS},
  series = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008},
  booktitle = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008},
  pages     = {709 -- 716},
  year      = {2008},
  abstract  = {Numerical models have become an essential part of snow avalanche engineering. Recent advances in understanding the rheology of flowing snow and the mechanics of entrainment and deposition have made numerical models more reliable. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, the application of numerical models poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to specify initial conditions (release zone dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this paper we discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with first and second-order numerical solution schemes. A tremendous effort has been invested in the implementation of advanced input and output features. Simulation results are therefore clearly and easily visualized to simplify their interpretation. More importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model performance. In this paper we present the governing differential equations, highlight some of the input and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that occurred in April 2008, near Klosters/Monbiel, Switzerland.},
  language  = {en}
}
@inproceedings{KernSchelthoffMathieu2012,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model},
  series = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  booktitle = {International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Lightning Protection <2012, Wien>},
  isbn      = {978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)},
  pages     = {1 -- 6},
  year      = {2012},
  language  = {en}
}
@inproceedings{BirgelLeschingerWegmannetal.2017,
  author    = {Birgel, Stefan and Leschinger, Tim and Wegmann, Kilian and Staat, Manfred},
  title     = {Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {116 -- 117},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfundtVogelsangGerling1988,
  author    = {Pfundt, H. and Vogelsang, D. and Gerling, Ulrich},
  title     = {Calculation of the crust profile in aluminium reduction cells by thermal computer modelling},
  series = {Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989},
  booktitle = {Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989},
  publisher = {Minerals, Metals and Materials Soc.},
  address   = {Warrendale, Pa.},
  pages     = {371 -- 377},
  year      = {1988},
  language  = {en}
}
@inproceedings{Wahle1983,
  author    = {Wahle, Michael},
  title     = {Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects},
  series = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  booktitle = {Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1},
  publisher = {British Nuclear Energy Society},
  address   = {London},
  isbn      = {0-7277-0192-4 (Druckausg.)},
  pages     = {162 -- 183},
  year      = {1983},
  language  = {en}
}
@inproceedings{KalkerTollHolleretal.2004,
  author    = {Kalker, Ines and Toll, B. and Holler, Stefan and Butenweg, Christoph and Topping, B. H. V. and Mota Soares, C. A.},
  title     = {Capacity analysis of textile retrofitted unreinforced masonry},
  series = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <7, 2004, Lissabon>},
  isbn      = {0-948749-95-4},
  doi       = {10.4203/ccp.79.194},
  pages     = {431 -- 432},
  year      = {2004},
  language  = {en}
}
@inproceedings{ButenwegGellertReindl2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas},
  title     = {Capacity design of masonry buildings under cyclic loading},
  series = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  booktitle = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  publisher = {Editions de l'Universit{\´e} de Li{\`e}ge},
  address   = {Li{\`e}ge},
  organization    = {Belgian Seismic Group},
  isbn      = {978-2-87456-063-7},
  pages     = {201 -- 208},
  year      = {2008},
  language  = {en}
}
@inproceedings{SchifferBragard2019,
  author    = {Schiffer, Fabian and Bragard, Michael},
  title     = {Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744101},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@inproceedings{FingerBraunBil2018,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Case studies in initial sizing for hybrid-electric general aviation aircraft},
  series = {2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio},
  booktitle = {2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio},
  doi       = {10.2514/6.2018-5005},
  year      = {2018},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2021,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of heterogeneous and volatile product data},
  series = {DATA 2020: Data Management Technologies and Applications},
  booktitle = {DATA 2020: Data Management Technologies and Applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-83013-7},
  doi       = {10.1007/978-3-030-83014-4_7},
  pages     = {134 -- 153},
  year      = {2021},
  abstract  = {The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.},
  language  = {en}
}
@inproceedings{SchmidtsKraftWinkensetal.2020,
  author    = {Schmidts, Oliver and Kraft, Bodo and Winkens, Marvin and Z{\"u}ndorf, Albert},
  title     = {Catalog integration of low-quality product data by attribute label ranking},
  series = {Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA},
  booktitle = {Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA},
  isbn      = {978-989-758-440-4},
  doi       = {10.5220/0009831000900101},
  pages     = {90 -- 101},
  year      = {2020},
  language  = {en}
}
@inproceedings{SchulteFischedickTammeHerrmann2009,
  author    = {Schulte-Fischedick, Jan and Tamme, Rainer and Herrmann, Ulf},
  title     = {CFD Analysis of the Cool Down Behaviour of Molten Salt Thermal Storage Systems},
  series = {ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10-14, 2008. - Vol. 2},
  booktitle = {ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10-14, 2008. - Vol. 2},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-4320-8},
  doi       = {doi:10.1115/ES2008-54101},
  pages     = {515 -- 524},
  year      = {2009},
  language  = {de}
}
@inproceedings{LuftGebhardtBalc2019,
  author    = {Luft, Angela and Gebhardt, Andreas and Balc, Nicolae},
  title     = {Challenges of additive manufacturing in production systems},
  series = {Modern technologies in manufacturing (MTeM 2019)},
  volume    = {299},
  booktitle = {Modern technologies in manufacturing (MTeM 2019)},
  number    = {Article 01003},
  doi       = {10.1051/matecconf/201929901003},
  pages     = {6 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{ReisertGeisslerFloerkeetal.2012,
  author    = {Reisert, Steffen and Geissler, H. and Fl{\"o}rke, R. and Weiler, C. and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Characterisation of aseptic sterilisation processes using an electronic nose},
  series = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  booktitle = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  editor    = {Abdelghani, Adnane and Sch{\"o}ning, Michael Josef},
  pages     = {45 -- 45},
  year      = {2012},
  language  = {en}
}
@inproceedings{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Characteristics of cross-bar block ramp flows},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{RothMoehringTippkoetter2016,
  author    = {Roth, J. and M{\"o}hring, S. and Tippk{\"o}tter, Nils},
  title     = {Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {130},
  year      = {2016},
  language  = {en}
}
@inproceedings{WeberTellisDuhovic2016,
  author    = {Weber, Tobias and Tellis, Jane J. and Duhovic, Miro},
  title     = {Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation},
  series = {ECCM 17, 17th European Conference on Composite Materials, M{\"u}nchen, DE, Jun 26-30, 2016},
  booktitle = {ECCM 17, 17th European Conference on Composite Materials, M{\"u}nchen, DE, Jun 26-30, 2016},
  isbn      = {978-3-00-053387-7},
  pages     = {1 -- 7},
  year      = {2016},
  language  = {en}
}
@inproceedings{KasparGroebelKuperjansetal.2013,
  author    = {Kaspar, K. and Groebel, Simone and Kuperjans, Isabel and Dielmann, Klaus-Peter and Selmer, Thorsten},
  title     = {Charakterisierung der Bioz{\"o}nose von Biogasfermentern in Abh{\"a}ngigkeit verschiedener Substrate},
  series = {Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabr{\"u}ck, Tagungsband},
  booktitle = {Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabr{\"u}ck, Tagungsband},
  publisher = {Profair Consult+Project},
  address   = {Hildesheim},
  issn      = {978-3-9813776-3-7},
  pages     = {69 -- 74},
  year      = {2013},
  language  = {de}
}
@inproceedings{BuxbaumSchwarteXuetal.1999,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Xu, Zhanping and Ringbeck, Thorsten and [u.a.],},
  title     = {Charge Transfer Simulation in PMD-Structures},
  series = {Sensor 99 : proceedings / 9th Int'l Fair and Conference for Sensors, Transducers \& Systems, May 18 - 20, 1999, Exhibition Centre N{\"u}rnberg/Germany. - Vol. 2},
  booktitle = {Sensor 99 : proceedings / 9th Int'l Fair and Conference for Sensors, Transducers \& Systems, May 18 - 20, 1999, Exhibition Centre N{\"u}rnberg/Germany. - Vol. 2},
  publisher = {AMA Service GmbH},
  address   = {Wunsdorf},
  pages     = {427 -- 432},
  year      = {1999},
  language  = {en}
}
@inproceedings{HoeflerKneerGrossetal.2015,
  author    = {H{\"o}fler, M. and Kneer, R. and Groß, Rolf Fritz and Kehrmann, K.},
  title     = {Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows},
  series = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  booktitle = {Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ; Volume 89)},
  editor    = {Vorobieff, P.},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-84564-946-3 (Print-Ausgabe)},
  issn      = {1746-4471},
  pages     = {89 -- 101},
  year      = {2015},
  language  = {en}
}
@inproceedings{HuckPoghossianBaeckeretal.2013,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Zander, W. and Schubert, J. and Sukoyan, L. H. and Begoyan, V. and Buniatyan, V. V. and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Chemische Sensoren mit Bariumstrontiumtitanat als funktionelle Schicht zur Multiparameterdetektion},
  series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  organization    = {Dresdner Sensor-Symposium <11, 2013>},
  isbn      = {978-3-9813484-5-3},
  pages     = {368 -- 372},
  year      = {2013},
  language  = {de}
}
@inproceedings{AlexopoulosHoffschmidtRauetal.2011,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard and Rau, Christoph and Sattler, Johannes, Christoph},
  title     = {Choice of solar share of a hybrid power plant of a central receiver system and a biogas plant in dependency of the geographical latitude},
  series = {World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Link{\"o}ping, Sweden / ed.: Bahram Moshfegh},
  booktitle = {World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Link{\"o}ping, Sweden / ed.: Bahram Moshfegh},
  publisher = {Univ. Electronic Pr.},
  address   = {Link{\"o}ping},
  isbn      = {9789173930703},
  pages     = {3710 -- 3717},
  year      = {2011},
  language  = {en}
}
@inproceedings{BlankeDringVonteinetal.2018,
  author    = {Blanke, Tobias and Dring, Bernd and Vontein, Marius and Kuhnhenne, Markus},
  title     = {Climate Change Mitigation Potentials of Vertical Building Integrated Photovoltaic},
  series = {8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden},
  booktitle = {8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden},
  pages     = {1 -- 7},
  year      = {2018},
  language  = {en}
}
@inproceedings{HammerViethMaier2005,
  author    = {Hammer, Andreas and Vieth, Matthias and Maier, Frank},
  title     = {Co-Plot as a new multivariate analysis method for operations management research?},
  series = {Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter},
  booktitle = {Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter},
  isbn      = {963-218-455-6},
  pages     = {1007 -- 1016},
  year      = {2005},
  language  = {en}
}
@inproceedings{DeyElsenFerreinetal.2021,
  author    = {Dey, Thomas and Elsen, Ingo and Ferrein, Alexander and Frauenrath, Tobias and Reke, Michael and Schiffer, Stefan},
  title     = {CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom},
  series = {PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference},
  booktitle = {PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference},
  editor    = {Makedon, Fillia},
  publisher = {Association for Computing Machinery},
  address   = {New York},
  isbn      = {9781450387927},
  doi       = {10.1145/3453892.3462697},
  pages     = {292 -- 299},
  year      = {2021},
  abstract  = {In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.},
  language  = {en}
}
@inproceedings{SteinbauerFerrein2019,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {CogRob 2018 : Cognitive Robotics Workshop. Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018). Tempe, AZ, USA, October 27th, 2018.},
  series = {CEUR workshop proceedings},
  booktitle = {CEUR workshop proceedings},
  number    = {Vol-2325},
  issn      = {1613-0073},
  pages     = {46 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{LindenlaufHoefkenSchuba2015,
  author    = {Lindenlauf, Simon and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Cold Boot Attacks on DDR2 and DDR3 SDRAM},
  series = {10th International Conference on Availability, Reliability and Security (ARES) 2015},
  booktitle = {10th International Conference on Availability, Reliability and Security (ARES) 2015},
  doi       = {10.1109/ARES.2015.28},
  pages     = {287 -- 292},
  year      = {2015},
  language  = {en}
}
@inproceedings{BitzAlaydrusStreckertetal.2002,
  author    = {Bitz, Andreas and Alaydrus, M. and Streckert, J. and Hansen, V.},
  title     = {Combination of the hybrid/sup [2]/-method and the FDTD-method for solution of boundary value problems with electrically large and high-resolution bodies},
  series = {IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June},
  booktitle = {IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-7330-8},
  doi       = {10.1109/APS.2002.1018209},
  pages     = {278 -- 281},
  year      = {2002},
  language  = {en}
}
@inproceedings{HorikawaAshikagaYamaguchietal.2022,
  author    = {Horikawa, Atsushi and Ashikaga, Mitsugu and Yamaguchi, Masato and Ogino, Tomoyuki and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combined heat and power supply demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine},
  series = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  booktitle = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  publisher = {American Society of Mechanical Engineers},
  address   = {Fairfield},
  isbn      = {978-0-7918-8599-4},
  doi       = {10.1115/GT2022-81620},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {Kawasaki Heavy Industries, Ltd. (KHI), Aachen University of Applied Sciences, and B\&B-AGEMA GmbH have investigated the potential of low NOx micro-mix (MMX) hydrogen combustion and its application to an industrial gas turbine combustor. Engine demonstration tests of a MMX combustor for the M1A-17 gas turbine with a co-generation system were conducted in the hydrogen-fueled power generation plant in Kobe City, Japan. This paper presents the results of the commissioning test and the combined heat and power (CHP) supply demonstration. In the commissioning test, grid interconnection, loading tests and load cut-off tests were successfully conducted. All measurement results satisfied the Japanese environmental regulation values. Dust and soot as well as SOx were not detected. The NOx emissions were below 84 ppmv at 15 \% O2. The noise level at the site boundary was below 60 dB. The vibration at the site boundary was below 45 dB. During the combined heat and power supply demonstration, heat and power were supplied to neighboring public facilities with the MMX combustion technology and 100 \% hydrogen fuel. The electric power output reached 1800 kW at which the NOx emissions were 72 ppmv at 15 \% O2, and 60 \%RH. Combustion instabilities were not observed. The gas turbine efficiency was improved by about 1 \% compared to a non-premixed type combustor with water injection as NOx reduction method. During a total equivalent operation time of 1040 hours, all combustor parts, the M1A-17 gas turbine as such, and the co-generation system were without any issues.},
  language  = {en}
}
@inproceedings{HorikawaOkadaYamaguchietal.2021,
  author    = {Horikawa, Atsushi and Okada, Kunio and Yamaguchi, Masato and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combustor development and engine demonstration of micro-mix hydrogen combustion applied to M1A-17 gas turbine},
  series = {ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition // Volume 3B: Combustion, Fuels, and Emissions},
  booktitle = {ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition // Volume 3B: Combustion, Fuels, and Emissions},
  doi       = {10.1115/GT2021-59666},
  pages     = {13 Seiten},
  year      = {2021},
  abstract  = {Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion. KHI, Aachen University of Applied Science, and B\&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15\%). Hereby, the elementary combustor development was completed. From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100\% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH\%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.},
  language  = {en}
}
@inproceedings{FleischhakerGebsBudnickietal.2013,
  author    = {Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Sutter, Dirk H.},
  title     = {Compact gigawatt-class sub-picosecond Yb:YAG thin-disk regenerative chirped-pulse amplifier with high average power at up to 800 kHz},
  series = {Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.},
  booktitle = {Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.},
  publisher = {IEEE Computer Society},
  isbn      = {978-1-4799-0593-5},
  doi       = {10.1109/CLEOE-IQEC.2013.6801054},
  pages     = {1},
  year      = {2013},
  language  = {en}
}
@inproceedings{FingerBraunBil2020,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Comparative assessment of parallel-hybrid-electric propulsion systems for four different aircraft},
  series = {AIAA SciTech Forum 2020, 06.01.2020 - 10.01.2020, Orlando},
  booktitle = {AIAA SciTech Forum 2020, 06.01.2020 - 10.01.2020, Orlando},
  doi       = {10.2514/6.2020-1502},
  pages     = {15 Seiten},
  year      = {2020},
  language  = {en}
}
@inproceedings{Finger2016,
  author    = {Finger, Felix},
  title     = {Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs},
  series = {Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016},
  booktitle = {Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016},
  pages     = {10 Seiten},
  year      = {2016},
  language  = {en}
}
@inproceedings{OertelBung2013,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Comparison of 2D dam-break waves with VOF and SPH method},
  series = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11113},
  year      = {2013},
  language  = {en}
}
@inproceedings{TakenagaWernerSawadaetal.2012,
  author    = {Takenaga, Shoko and Werner, Frederik and Sawada, Kazuaki and Sch{\"o}ning, Michael Josef},
  title     = {Comparison of label-free ACh image sensors based on CCD and LAPS},
  isbn      = {978-3-9813484-2-2},
  doi       = {10.5162/IMCS2012/4.2.6},
  pages     = {356 -- 359},
  year      = {2012},
  language  = {en}
}
@inproceedings{LeiseSimonAltherr2020,
  author    = {Leise, Philipp and Simon, Nicolai and Altherr, Lena},
  title     = {Comparison of Piecewise Linearization Techniques to Model Electric Motor Efficiency Maps: A Computational Study},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48439-2},
  doi       = {10.1007/978-3-030-48439-2_55},
  pages     = {457 -- 463},
  year      = {2020},
  abstract  = {To maximize the travel distances of battery electric vehicles such as cars or buses for a given amount of stored energy, their powertrains are optimized energetically. One key part within optimization models for electric powertrains is the efficiency map of the electric motor. The underlying function is usually highly nonlinear and nonconvex and leads to major challenges within a global optimization process. To enable faster solution times, one possibility is the usage of piecewise linearization techniques to approximate the nonlinear efficiency map with linear constraints. Therefore, we evaluate the influence of different piecewise linearization modeling techniques on the overall solution process and compare the solution time and accuracy for methods with and without explicitly used binary variables.},
  language  = {en}
}
@inproceedings{LatzkeAlexopoulosKronhardtetal.2015,
  author    = {Latzke, Markus and Alexopoulos, Spiros and Kronhardt, Valentina and Rend{\´o}n, Carlos and Sattler, Johannes, Christoph},
  title     = {Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver},
  series = {Energy Procedia},
  booktitle = {Energy Procedia},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2015.03.142},
  pages     = {1327 -- 1334},
  year      = {2015},
  language  = {en}
}
@inproceedings{AlexopoulosHoffschmidtRau2011,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard and Rau, Christoph},
  title     = {Comparison of steady-state and transient simulations for solar tower power plants with open-volumetric receiver},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}
@inproceedings{WolfKoenig2017,
  author    = {Wolf, Martin and K{\"o}nig, Johannes Alexander},
  title     = {Competence Developing Games - Ein {\"U}berblick},
  series = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  booktitle = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  editor    = {Eibl, Maximilian and Gaedke, Martin},
  organization    = {Gesellschaft f{\"u}r Informatik},
  isbn      = {978-3-88579-669-5},
  doi       = {10.18420/in2017_32},
  pages     = {385 -- 391},
  year      = {2017},
  abstract  = {Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu {\"u}berf{\"u}hren. In diesem Artikel wird der {\"U}berbegriff „Competence Developing Games" definiert und anhand von Beispielen erl{\"a}utert. Daf{\"u}r werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erl{\"a}utert und eine Zuordnung durch-gef{\"u}hrt.},
  language  = {de}
}
@inproceedings{FerreinMeessenLimpertetal.2021,
  author    = {Ferrein, Alexander and Meeßen, Marcus and Limpert, Nicolas and Schiffer, Stefan},
  title     = {Compiling ROS Schooling Curricula via Contentual Taxonomies},
  series = {Robotics in Education},
  booktitle = {Robotics in Education},
  editor    = {Lepuschitz, Wilfried},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-67411-3},
  doi       = {10.1007/978-3-030-67411-3_5},
  pages     = {49 -- 60},
  year      = {2021},
  language  = {en}
}
@inproceedings{Huening2019,
  author    = {H{\"u}ning, Felix},
  title     = {Complexity for heterogeneous classes: teaching embedded systems using an open project approach},
  series = {Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings},
  booktitle = {Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings},
  isbn      = {978-2-87352-018-2},
  pages     = {540 -- 549},
  year      = {2019},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@inproceedings{LandAGligorevic2004,
  author    = {Land, Ingmar and A., Peter and Gligorevic, Snjezana},
  title     = {Computation of symbol-wise mutual information in transmission systems with logAPP decoders and application to EXIT charts},
  series = {5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)},
  booktitle = {5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  organization    = {International Conference Source and Channel Coding <5, 2004, Erlangen>},
  isbn      = {3-8007-2802-8},
  pages     = {195 -- 202},
  year      = {2004},
  language  = {en}
}
@inproceedings{ReimerBraunChenetal.2007,
  author    = {Reimer, Lars and Braun, Carsten and Chen, B.-H. and Ballmann, Josef},
  title     = {Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests},
  series = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden},
  booktitle = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden},
  publisher = {KTH},
  address   = {Stockholm},
  pages     = {1 CD-ROM},
  year      = {2007},
  language  = {en}
}
@inproceedings{VoronkovaBauerKotliar2014,
  author    = {Voronkova, Eva B. and Bauer, Svetlana M. and Kotliar, Konstantin},
  title     = {Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye},
  series = {2014 International Conference on Computer Technologies in Physical and Engineering Applications : ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg},
  booktitle = {2014 International Conference on Computer Technologies in Physical and Engineering Applications : ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4799-5315-8},
  pages     = {204 -- 205},
  year      = {2014},
  language  = {en}
}
@inproceedings{JungStaat2016,
  author    = {Jung, Alexander and Staat, Manfred},
  title     = {Computing olympic gold: Ski jumping as an example},
  series = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  booktitle = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen},
  editor    = {Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-06-6},
  doi       = {10.17185/duepublico/40821},
  pages     = {54 -- 55},
  year      = {2016},
  language  = {en}
}
@inproceedings{KemperHellenbroichEsch2009,
  author    = {Kemper, Hans and Hellenbroich, Gereon and Esch, Thomas},
  title     = {Concept of an innovative passenger-car hybrid drive for European driving conditions},
  series = {Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig},
  booktitle = {Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig},
  publisher = {Gesamtzentrum f{\"u}r Verkehr (GZVB)},
  address   = {Braunschweig},
  isbn      = {978-3-937655-20-8},
  pages     = {264 -- 287},
  year      = {2009},
  abstract  = {The downsizing of spark ignition engines in conjunction with turbocharging is considered to be a promising method for reducing CO₂ emissions. Using this concept, FEV has developed a new, highly efficient drivetrain to demonstrate fuel consumption reduction and drivability in a vehicle based on the Ford Focus ST. The newly designed 1.8L turbocharged gasoline engine incorporates infinitely variable intake and outlet control timing and direct fuel injection utilizing piezo injectors centrally located. In addition, this engine uses a prototype FEV engine control system, with software that was developed and adapted entirely by FEV. The vehicle features a 160 kW engine with a maximum mean effective pressure of 22.4 bar and 34 \% savings in simulated fuel consumption. During the first stage, a new electrohydraulically actuated hybrid transmission with seven forward gears and one reverse gear and a single dry starting clutch will be integrated. The electric motor of the hybrid is directly connected to the gear set of the transmission. Utilizing the special gear set layout, the electric motor can provide boost during a change of gears, so that there is no interruption in traction. Therefore, the transmission system combines the advantages of a double clutch controlled gear change (gear change without an interruption in traction) with the efficient, cost-effective design of an automated manual transmission system. Additionally, the transmission provides a purely electric drive system and the operation of an air-conditioning compressor during the engine stop phases. One other alternative is through the use of CAI (Controlled Auto Ignition), which incorporates a process developed by FEV for controlled compression ignition.},
  language  = {en}
}
@inproceedings{GoettenFinger2019,
  author    = {G{\"o}tten, Falk and Finger, Felix},
  title     = {Conceptual Design of a Modular 150 kg Vertical Take-off and Landing Unmanned Aerial Vehicle},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany},
  pages     = {1 -- 10},
  year      = {2019},
  language  = {en}
}