@inproceedings{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Damage reduction system for masonry infill walls under seismic loading},
  series = {ce/papers},
  volume    = {2},
  booktitle = {ce/papers},
  number    = {4},
  publisher = {Ernst \& Sohn Verlag},
  address   = {Berlin},
  doi       = {10.1002/cepa.863},
  pages     = {267 -- 273},
  year      = {2018},
  abstract  = {Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.},
  language  = {en}
}
@inproceedings{Dielmann2002,
  author    = {Dielmann, Klaus-Peter},
  title     = {Darstellung des Erneuerbaren Energiegesetzes (EEG) und dessen Auswirkungen},
  year      = {2002},
  abstract  = {Erneuerbares Energien-Gesetz: Anwendungsbereich, Abnahme- und Verg{\"u}tungspflicht, Verg{\"u}tungss{\"a}tze, Netzkosten, Ausgleichsregelungen Auswirkungen des EEG: Photovoltaik, Windkraft, Biomasse, Wasserkraft, Kl{\"a}r-, Deponie- und Grubengas, Geothermie Zusammenfassung und Ausblick},
  subject      = {Energierecht},
  language  = {de}
}
@inproceedings{Goettsche2008,
  author    = {G{\"o}ttsche, Joachim},
  title     = {Das Geb{\"a}ude-Armaturenbrett (GAB) - ein hochaufl{\"o}sendes Monitoring-Tool f{\"u}r Verbrauchsdaten in Privathaushalten},
  series = {Energieeffizienz + Bestand : energetische Sanierung von Geb{\"a}uden ; internationales Anwenderforum ; 14./15. Februar 2008, Kloster Banz, Bad Staffelstein},
  booktitle = {Energieeffizienz + Bestand : energetische Sanierung von Geb{\"a}uden ; internationales Anwenderforum ; 14./15. Februar 2008, Kloster Banz, Bad Staffelstein},
  publisher = {OTTI},
  address   = {Regensburg},
  isbn      = {978-3-934681-68-2},
  pages     = {216 -- 223},
  year      = {2008},
  language  = {de}
}
@inproceedings{FissabreSchmidtSonnleitner2012,
  author    = {Fissabre, Anke and Schmidt, Klaus and Sonnleitner, Andrea},
  title     = {Das Lehnsm{\"u}hlschloß in Ortrand - ein s{\"a}chsisches Herrenhaus der Renaissance},
  series = {Wandel im Wohnbau zwischen Gotik und Barock : die s{\"a}chsisch-b{\"o}hmische Entwicklung im {\"u}berregionalen Vergleich},
  booktitle = {Wandel im Wohnbau zwischen Gotik und Barock : die s{\"a}chsisch-b{\"o}hmische Entwicklung im {\"u}berregionalen Vergleich},
  publisher = {Jonas},
  address   = {Marburg},
  isbn      = {978-3-89445-390-9},
  pages     = {487 -- 501},
  year      = {2012},
  language  = {de}
}
@inproceedings{SchmiegelKochDittmeretal.2010,
  author    = {Schmiegel, A. and Koch, K. and Dittmer, M. and Braun, M. and Landau, M. and Dick, C. and Bragard, Michael and [u.a.],},
  title     = {Das Sol-ion System : ein System zur Optimierung des Eigenverbrauchs von PV-Strom},
  series = {Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. M{\"a}rz 2010, Kloster Banz, Bad Staffelstein. - (Wissen f{\"u}r Profis)},
  booktitle = {Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. M{\"a}rz 2010, Kloster Banz, Bad Staffelstein. - (Wissen f{\"u}r Profis)},
  publisher = {OTTI, Ostbayerisches Technologie-Transfer-Inst.},
  address   = {Regensburg},
  isbn      = {978-3-941785-23-6},
  pages     = {354 -- 359},
  year      = {2010},
  language  = {de}
}
@inproceedings{BeckerEggertFleischeretal.2012,
  author    = {Becker, J{\"o}rg and Eggert, Mathias and Fleischer, Stefan and Heddier, Marcel and Knackstedt, Ralf},
  title     = {Data Warehouse Design and Legal Visualization - The Applicability of H2 for Reporting},
  series = {Proceedings of the 23rd Australasian Conference on Information Systems 2012},
  booktitle = {Proceedings of the 23rd Australasian Conference on Information Systems 2012},
  pages     = {11 S.},
  year      = {2012},
  language  = {de}
}
@inproceedings{StieglitzWollert2010,
  author    = {Stieglitz, Kristian and Wollert, J{\"o}rg},
  title     = {Database driven modernization and expansion of storage systems},
  series = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  booktitle = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2},
  publisher = {IIIS},
  address   = {Winter Garden, Fla.},
  organization    = {International Multi-Conference on Engineering and Technological Innovation <3, 2010, Orlando, Fla.>},
  isbn      = {978-1-936338-03-0},
  pages     = {180 -- 183},
  year      = {2010},
  language  = {de}
}
@inproceedings{WeberWolf2017,
  author    = {Weber, Niklas and Wolf, Martin},
  title     = {Datenerhebung f{\"u}r die CDG-Forschung},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  editor    = {Barton, Thomas},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {218 -- 227},
  year      = {2017},
  language  = {de}
}
@inproceedings{Golland2019,
  author    = {Golland, Alexander},
  title     = {Datenschutzregulierung als Eingriff in Wertsch{\"o}pfungsmodelle},
  series = {Die Zukunft der Daten{\"o}konomie : zwischen Gesch{\"a}ftsmodell, Kollektivgut und Verbraucherschutz},
  booktitle = {Die Zukunft der Daten{\"o}konomie : zwischen Gesch{\"a}ftsmodell, Kollektivgut und Verbraucherschutz},
  editor    = {Ochs, Carsten and Friedewald, Michael and Hess, Thomas and Lamla, J{\"o}rn},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-27510-5},
  pages     = {45 -- 68},
  year      = {2019},
  abstract  = {Das Kopplungsverbot verbietet, die Nutzung einer Dienstleistung von der Erteilung einer nicht f{\"u}r die Leistungserbringung erforderlichen Einwilligung abh{\"a}ngig zu machen. Personalisierte Werbung wird hierdurch erheblich erschwert. Anbieter k{\"o}nnen jedoch durch Bereitstellung eines alternativen, einwilligungsfreien Zugangs zu derselben Leistung ihren Dienst datenschutzkonform anbieten. Ein solcher Zugang muss nicht zwingend in Form eines fixen Entgelts gestaltet sein. Vielmehr ist es datenschutzrechtlich in gewissem Umfang zul{\"a}ssig, Preise unter Einbeziehung personenbezogener Daten dynamisch zu gestalten.},
  language  = {de}
}
@inproceedings{Kuperjans2000,
  author    = {Kuperjans, Isabel},
  title     = {Decision-support-system for technical, economical and ecological design and evaluation of industrial energy systems},
  series = {Industrial ecology and sustainability : conferences and workshops ; September 22 - 25, 1999, Troyes, France},
  booktitle = {Industrial ecology and sustainability : conferences and workshops ; September 22 - 25, 1999, Troyes, France},
  editor    = {Bourg, Dominique and Erkman, Suren},
  publisher = {Universit{\´e} de technologie de Troyes Gen{\`e}ve : Institute for communication and analysis of science and technology},
  address   = {[Troyes]},
  pages     = {1 CD-ROM},
  year      = {2000},
  language  = {en}
}
@inproceedings{SchifferFerrein2015,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {Decision-Theoretic Planning with Linguistic Terms in Golog},
  series = {FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.},
  booktitle = {FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.},
  issn      = {1613-0073},
  url       = {http://nbn-resolving.de/urn:nbn:de:0074-1424-4},
  pages     = {7 Seiten},
  year      = {2015},
  language  = {en}
}
@inproceedings{SchulteTiggesMatheisRekeetal.2023,
  author    = {Schulte-Tigges, Joschua and Matheis, Dominik and Reke, Michael and Walter, Thomas and Kaszner, Daniel},
  title     = {Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain},
  series = {HCII 2023: HCI in Mobility, Transport, and Automotive Systems},
  booktitle = {HCII 2023: HCI in Mobility, Transport, and Automotive Systems},
  editor    = {Kr{\"o}mker, Heidi},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35677-3 (Print)},
  doi       = {10.1007/978-3-031-35678-0_12},
  pages     = {200 -- 210},
  year      = {2023},
  abstract  = {Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle's software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.},
  language  = {en}
}
@inproceedings{Mandelartz1998,
  author    = {Mandelartz, Johannes},
  title     = {Der Aluminium-Sekund{\"a}rstoffstrom in Deutschland unter transporttechnischen Gesichtspunkten : Vortrag},
  series = {Rohstofftechnik im Wandel : 26./27. November 1998 ; Tagungsband / Rheinisch-Westf{\"a}lische Technische Hochschule Aachen. Aachener Umwelttage der Fakult{\"a}t f{\"u}r Bergbau, H{\"u}ttenwesen und Geowissenschaften},
  booktitle = {Rohstofftechnik im Wandel : 26./27. November 1998 ; Tagungsband / Rheinisch-Westf{\"a}lische Technische Hochschule Aachen. Aachener Umwelttage der Fakult{\"a}t f{\"u}r Bergbau, H{\"u}ttenwesen und Geowissenschaften},
  organization    = {Aachener Umwelttage <8, 1998>},
  pages     = {V.1,1 -- V.1,21},
  year      = {1998},
  language  = {de}
}
@inproceedings{BeckerEggertKnackstedt2010,
  author    = {Becker, J{\"o}rg and Eggert, Mathias and Knackstedt, Ralf},
  title     = {Der Beitrag der Referenzmodellierung zur Compliance im Reporting des Finanzsektors},
  series = {Business Intelligence Operational Structures: Towards the Design of a Reference Process Map},
  booktitle = {Business Intelligence Operational Structures: Towards the Design of a Reference Process Map},
  pages     = {11 -- 18},
  year      = {2010},
  language  = {de}
}
@inproceedings{BragardKoellenspergerDeDoncker2007,
  author    = {Bragard, Michael and K{\"o}llensperger, P. and De Doncker, R. W.},
  title     = {Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit},
  series = {"Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne},
  booktitle = {"Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne},
  editor    = {Dmowski, Antoni},
  publisher = {APS Energia},
  address   = {Warszawa},
  isbn      = {83-918709-7-9},
  pages     = {7.1 -- 7.9},
  year      = {2007},
  language  = {de}
}
@inproceedings{SpaeteHubrichKeipetal.1998,
  author    = {Sp{\"a}te, Frank and Hubrich, J{\"o}rg and Keip, Wolfgang and Meliß, Michael},
  title     = {Der Solar-Campus J{\"u}lich - Stand der Arbeiten},
  series = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  booktitle = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  publisher = {Solar Promotion},
  address   = {M{\"u}nchen},
  organization    = {Deutsche Gesellschaft f{\"u}r Sonnenenergie},
  pages     = {666 -- 672},
  year      = {1998},
  language  = {de}
}
@inproceedings{Goettsche2005,
  author    = {G{\"o}ttsche, Joachim},
  title     = {Der vertikale Sonnenlichtquotient : eine wichtige Kenngr{\"o}ße zur Charakterisierung von Lichtlenksystemen},
  series = {Elftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 27./28. Januar 2005, Kloster Banz},
  booktitle = {Elftes Symposium Innovative Lichttechnik in Geb{\"a}uden : 27./28. Januar 2005, Kloster Banz},
  publisher = {OTTI-Energie-Kolleg},
  address   = {Regensburg},
  isbn      = {3-934681-37-9},
  pages     = {79 -- 84},
  year      = {2005},
  language  = {de}
}
@inproceedings{Schwarzer2008,
  author    = {Schwarzer, Klemens},
  title     = {Desalination systems with renewable energies},
  series = {DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut J{\"u}lich / Deutsche Meerwasserentsalzung e.V.},
  booktitle = {DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut J{\"u}lich / Deutsche Meerwasserentsalzung e.V.},
  publisher = {DME},
  address   = {Duisburg},
  isbn      = {978-3-86861-017-8},
  pages     = {219 Bl. in getr. Z{\"a}hlung : zahlr. Ill. und graph. Darst., Kt.},
  year      = {2008},
  language  = {en}
}
@inproceedings{ButenwegRajan2014,
  author    = {Butenweg, Christoph and Rajan, Sreelakshmy},
  title     = {Design and construction techniques of AAC masonry buildings in earthquakes regions},
  series = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014},
  booktitle = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014},
  year      = {2014},
  language  = {en}
}
@inproceedings{ElgamalHeuermann2020,
  author    = {Elgamal, Abdelrahman and Heuermann, Holger},
  title     = {Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications},
  series = {2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020},
  booktitle = {2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020},
  isbn      = {978-3-9820397-1-8},
  pages     = {124 -- 127},
  year      = {2020},
  language  = {en}
}
@inproceedings{SadeghfamSadeghiAhangarElgamaletal.2019,
  author    = {Sadeghfam, Arash and Sadeghi-Ahangar, A. and Elgamal, Abdelrahman and Heuermann, Holger},
  title     = {Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications},
  series = {IEEE MTT-S International Microwave Symposium Digest},
  booktitle = {IEEE MTT-S International Microwave Symposium Digest},
  isbn      = {978-172811309-8},
  pages     = {63 -- 66},
  year      = {2019},
  language  = {en}
}
@inproceedings{TersteggeWeberHerzogetal.1997,
  author    = {Terstegge, Andreas and Weber, S. and Herzog, H. and M{\"u}ller-G{\"a}rtner, H. W. and Halling, H.},
  title     = {Design and implementation aspects of a 3D reconstruction algorithm for the J{\"u}lich TierPET system},
  series = {1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97},
  booktitle = {1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97},
  pages     = {170 -- 173},
  year      = {1997},
  language  = {en}
}
@inproceedings{BragardSoltauDeDonckeretal.2010,
  author    = {Bragard, Michael and Soltau, N. and De Doncker, R. W. and Schmiegel, A.},
  title     = {Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618220},
  pages     = {2944 -- 2949},
  year      = {2010},
  language  = {en}
}
@inproceedings{BragardGottschlichDeDoncker2011,
  author    = {Bragard, Michael and Gottschlich, J. and De Doncker, R. W.},
  title     = {Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure},
  series = {2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE \& ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]},
  booktitle = {2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE \& ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-958-4 (Print)},
  doi       = {10.1109/ICPE.2011.5944661},
  pages     = {1182 -- 1189},
  year      = {2011},
  language  = {en}
}
@inproceedings{DachwaldWurm2009,
  author    = {Dachwald, Bernd and Wurm, P.},
  title     = {Design concept and modeling of an advanced solar photon thruster},
  series = {Advances in the Astronautical Sciences},
  booktitle = {Advances in the Astronautical Sciences},
  publisher = {American Astronautical Society},
  address   = {San Diego, Calif.},
  isbn      = {978-087703554-1},
  issn      = {00653438},
  pages     = {723 -- 740},
  year      = {2009},
  abstract  = {The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {Design considerations of the duo fugam dual rotor UAV},
  series = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  booktitle = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  isbn      = {978-1-5386-2314-5},
  doi       = {10.1109/RoboMech.2017.8261115},
  pages     = {7 -- 13},
  year      = {2017},
  language  = {en}
}
@inproceedings{HirschWahle1978,
  author    = {Hirsch, G. and Wahle, Michael},
  title     = {Design criteria for dynamic vibration absorbers with regard to the nonproportional damping},
  series = {Proceedings / The Third US National Conference on Wind Engineering Research, February 26 - March 1, 1978, University of Florida, Gainesville},
  booktitle = {Proceedings / The Third US National Conference on Wind Engineering Research, February 26 - March 1, 1978, University of Florida, Gainesville},
  editor    = {Leadon, Bernhard M.},
  publisher = {Univ. of Florida, Div. of Continuing Education Publ.},
  address   = {Gainsville, Fla.},
  pages     = {507 -- 510},
  year      = {1978},
  language  = {en}
}
@inproceedings{HardtAbdelGawadMartinetal.1975,
  author    = {Hardt, Arno and Abdel-Gawad, A and Martin, S. and Reich, J.},
  title     = {Design procedures for the Juelich QQDDQ high resolution spectrometer},
  series = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  booktitle = {Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975},
  pages     = {45 -- 51},
  year      = {1975},
  language  = {en}
}
@inproceedings{Czarnecki2016,
  author    = {Czarnecki, Christian},
  title     = {Design und Nutzung einer industriespezifischen Referenzarchitektur f{\"u}r die Telekommunikationsindustrie},
  series = {GI Edition Proceedings Band 259 INFORMATIK 2016. 26.-30. September 2016 Klagenfurt},
  booktitle = {GI Edition Proceedings Band 259 INFORMATIK 2016. 26.-30. September 2016 Klagenfurt},
  editor    = {Mayr, Heinrich C. and Pinzger, Martin and Gesellschaft f{\"u}r Informatik e. V. (GI),},
  publisher = {K{\"o}llen},
  address   = {Bonn},
  isbn      = {9783885796534},
  issn      = {1617-5468},
  pages     = {807 -- 814},
  year      = {2016},
  abstract  = {Zur Unterst{\"u}tzung des Transformationsbedarfs von Telekommunikationsunternehmen sind die Referenzmodelle des TM Forums in der Praxis weltweit anerkannt. Dabei findet jedoch meist eine losgel{\"o}ste Nutzung f{\"u}r spezifische Einzelthemen statt. Daher f{\"u}hrt dieser Artikel die bestehenden Inhalte in einer industriespezifischen, {\"u}bergreifenden Referenzarchitektur zusammen. Der Fokus liegt auf den Ebenen Aufbauorganisation, Prozesse, Applikationen und Daten. Dar{\"u}ber hinaus werden inhaltliche Architekturdom{\"a}nen zur Strukturierung angeboten. Die Referenzarchitektur ist hierarchisch aufgebaut und wird hier beispielhaft f{\"u}r ausgew{\"a}hlte, aggregierte Inhalte beschrieben. Als erste Evaluation wird die Anwendung der Referenzarchitektur in drei Praxisprojekten erl{\"a}utert.},
  language  = {de}
}
@inproceedings{OstkottePetersHueningetal.2022,
  author    = {Ostkotte, Sebastian and Peters, Constantin and H{\"u}ning, Felix and Bragard, Michael},
  title     = {Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect},
  series = {2022 ELEKTRO (ELEKTRO)},
  booktitle = {2022 ELEKTRO (ELEKTRO)},
  publisher = {IEEE},
  isbn      = {978-1-6654-6726-1},
  issn      = {2691-0616},
  doi       = {10.1109/ELEKTRO53996.2022.9803477},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation. Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.},
  language  = {en}
}
@inproceedings{Vitting2011,
  author    = {Vitting, Eva},
  title     = {Designprojekte zu Solarenergie: Wie kommunizieren wir unsere Technik?},
  series = {Forschung und Entwicklung f{\"u}r solarthermische Kraftwerke : 14. K{\"o}lner Sonnenkolloquium Mittwoch, 13. Juli 2011, im Auditorium des Campus J{\"u}lich der FH Aachen : Kurzfassungen der Vortr{\"a}ge und Poster},
  booktitle = {Forschung und Entwicklung f{\"u}r solarthermische Kraftwerke : 14. K{\"o}lner Sonnenkolloquium Mittwoch, 13. Juli 2011, im Auditorium des Campus J{\"u}lich der FH Aachen : Kurzfassungen der Vortr{\"a}ge und Poster},
  publisher = {DLR},
  address   = {K{\"o}ln},
  pages     = {3 S.},
  year      = {2011},
  language  = {de}
}
@inproceedings{RochefortVerverGrunendahletal.2005,
  author    = {Rochefort, E. de and Verver, M. and Grunendahl, A. and Mooi, H. and Butenweg, Christoph},
  title     = {Detailed modelling of the lumbar spine for investigation of low back pain},
  series = {Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)},
  booktitle = {Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)},
  publisher = {SAE International},
  address   = {Warrendale, Pa.},
  organization    = {Society of Automotive Engineers},
  issn      = {0096-736X},
  doi       = {10.4271/2005-01-2716},
  pages     = {1 -- 11},
  year      = {2005},
  language  = {en}
}
@inproceedings{MolinnusHardtKaeveretal.2017,
  author    = {Molinnus, Denise and Hardt, Gabriel and K{\"a}ver, Larissa and Willenberg, Holger S. and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Detection of Adrenaline Based on Bioelectrocatalytical System to Support Tumor Diagnostic Technology},
  series = {MDPI Proceedings},
  booktitle = {MDPI Proceedings},
  doi       = {10.3390/proceedings1040506},
  pages     = {4 Seiten},
  year      = {2017},
  language  = {en}
}
@inproceedings{TakenagaHerreraWerneretal.2013,
  author    = {Takenaga, Shoko and Herrera, Cony F. and Werner, Frederik and Biselli, Manfred and Schnitzler, Thomas and Sch{\"o}ning, Michael Josef and {\"O}hlschl{\"a}ger, Peter and Wagner, Torsten},
  title     = {Detection of the metabolic activity of cells by differential measurements based on a single light-addressable potentiometric sensor chip},
  series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  organization    = {Dresdner Sensor-Symposium <11, 2013>},
  isbn      = {978-3-9813484-5-3},
  pages     = {63 -- 67},
  year      = {2013},
  language  = {en}
}
@inproceedings{BohrnMuchaWerneretal.2012,
  author    = {Bohrn, Ulrich and Mucha, Andreas and Werner, Frederik and St{\"u}tz, Evamaria and B{\"a}cker, Matthias and Krumbe, Christoph and Schienle, Meinrad and Fleischer, Maximilian and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Detection of toxic chromium species in water using cellbased sensor systems},
  isbn      = {978-3-9813484-2-2},
  doi       = {10.5162/IMCS2012/P2.1.14},
  pages     = {1364 -- 1367},
  year      = {2012},
  language  = {en}
}
@inproceedings{HartmannKallweitFeldusenetal.2012,
  author    = {Hartmann, Axel and Kallweit, Stephan and Feldusen, Antje and Schr{\"o}der, Wolfgang},
  title     = {Detection of upstream propagating sound waves at buffet flow using high-speed PIV},
  pages     = {14 S. : graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{Wahle1983,
  author    = {Wahle, Michael},
  title     = {Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes},
  series = {Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)},
  booktitle = {Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)},
  publisher = {Begell House},
  address   = {Redding, Connecticut},
  pages     = {339 -- 353},
  year      = {1983},
  language  = {en}
}
@inproceedings{TischbeinKeanVertgewalletal.2023,
  author    = {Tischbein, Franziska and Kean, Kilian and Vertgewall, Chris Martin and Ulbig, Andreas and Altherr, Lena},
  title     = {Determination of the topology of low-voltage distribution grids using cluster methods},
  series = {27th International Conference on Electricity Distribution (CIRED 2023)},
  booktitle = {27th International Conference on Electricity Distribution (CIRED 2023)},
  publisher = {IEEE},
  isbn      = {978-1-83953-855-1},
  doi       = {10.1049/icp.2023.0478},
  pages     = {1 -- 5},
  year      = {2023},
  abstract  = {Due to the decarbonization of the energy sector, the electric distribution grids are undergoing a major transformation, which is expected to increase the load on the operating resources due to new electrical loads and distributed energy resources. Therefore, grid operators need to gradually move to active grid management in order to ensure safe and reliable grid operation. However, this requires knowledge of key grid variables, such as node voltages, which is why the mass integration of measurement technology (smart meters) is necessary. Another problem is the fact that a large part of the topology of the distribution grids is not sufficiently digitized and models are partly faulty, which means that active grid operation management today has to be carried out largely blindly. It is therefore part of current research to develop methods for determining unknown grid topologies based on measurement data. In this paper, different clustering algorithms are presented and their performance of topology detection of low voltage grids is compared. Furthermore, the influence of measurement uncertainties is investigated in the form of a sensitivity analysis.},
  language  = {en}
}
@inproceedings{SchleupenEngemannBagherietal.2017,
  author    = {Schleupen, Josef and Engemann, Heiko and Bagheri, Mohsen and Kallweit, Stephan and Dahmann, Peter},
  title     = {Developing a climbing maintenance robot for tower and rotor blade service of wind turbines},
  series = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  booktitle = {Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-49058-8},
  doi       = {10.1007/978-3-319-49058-8_34},
  pages     = {310 -- 319},
  year      = {2017},
  language  = {en}
}
@inproceedings{FunkeBoernerHendricketal.2013,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E. and Elsing, R.},
  title     = {Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine},
  series = {Progress in Propulsion Physics. - Vol. 4},
  booktitle = {Progress in Propulsion Physics. - Vol. 4},
  editor    = {DeLuca, Luigi T.},
  publisher = {EDP Sciences},
  address   = {[Les Ulis]},
  isbn      = {978-2-7598-0876-2},
  doi       = {10.1051/eucass/201304357},
  pages     = {357 -- 372},
  year      = {2013},
  language  = {en}
}
@inproceedings{VedralKruseWollert2007,
  author    = {Vedral, Andreas and Kruse, Thomas and Wollert, J{\"o}rg},
  title     = {Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4},
  series = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  booktitle = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Emerging Technologies and Factory Automation <12, 2007, Patras, Greece>},
  isbn      = {1424408261 ; 9781424408269},
  doi       = {10.1109/EFTA.2007.4416769},
  pages     = {177 -- 186},
  year      = {2007},
  language  = {en}
}
@inproceedings{FunkeBeckmannAbanteriba2019,
  author    = {Funke, Harald and Beckmann, Nils and Abanteriba, Sylvester},
  title     = {Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures},
  series = {ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. June 17-21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions},
  booktitle = {ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. June 17-21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions},
  isbn      = {978-0-7918-5861-5},
  doi       = {10.1115/GT2019-90095},
  pages     = {11 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{FunkeKeinzHajAyedetal.2015,
  author    = {Funke, Harald and Keinz, Jan and Haj Ayed, A. and Kazari, M. and Kitajima, J. and Horikawa, A. and Okada, K.},
  title     = {Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine},
  series = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  booktitle = {Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan},
  isbn      = {978-4-89111-008-6},
  pages     = {131 -- 140},
  year      = {2015},
  language  = {en}
}
@inproceedings{AnthrakidisHerrmannSchornetal.2015,
  author    = {Anthrakidis, Anette and Herrmann, Ulf and Schorn, Christian and Schwarzer, Klemens and Wedding, Philipp and Weis, Fabian},
  title     = {Development and Testing of a Novel Method for the Determination of the Efficiency of Concentrating Solar Thermal Collectors},
  series = {Conference Proceedings Solar World Congress 2015, Daegu, Korea, 08 - 12 November 2015},
  booktitle = {Conference Proceedings Solar World Congress 2015, Daegu, Korea, 08 - 12 November 2015},
  pages     = {9 Seiten},
  year      = {2015},
  language  = {en}
}
@inproceedings{SchneiderAlHakimKayseretal.2017,
  author    = {Schneider, Oliver and Al Hakim, Taher and Kayser, Peter and Digel, Ilya},
  title     = {Development and trials of a test chamber for ultrasound-assisted sampling of living cells from solid surfaces},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {96 -- 97},
  year      = {2017},
  language  = {en}
}
@inproceedings{BuckWurmhoeringerLehleetal.2010,
  author    = {Buck, R. and Wurmh{\"o}ringer, K. and Lehle, R. and Pfahl, A. and G{\"o}ttsche, Joachim and Meyr, T.},
  title     = {Development of a 30m2 heliostat with hydraulic drive},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {74 -- 75},
  year      = {2010},
  language  = {en}
}
@inproceedings{SchopenKemperEsch2021,
  author    = {Schopen, Oliver and Kemper, Hans and Esch, Thomas},
  title     = {Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC},
  series = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  booktitle = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  publisher = {FH Joanneum},
  address   = {Graz},
  isbn      = {978-3-902103-94-9},
  pages     = {45 -- 46},
  year      = {2021},
  abstract  = {In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device.},
  language  = {en}
}
@inproceedings{CaminosSchmitzAttietal.2022,
  author    = {Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Atti, Vikrama and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon},
  title     = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086262},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.},
  language  = {en}
}
@inproceedings{HeringUlberTippkoetter2016,
  author    = {Hering, T. and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Development of a screening system for antimicrobial surfaces},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {129},
  year      = {2016},
  language  = {en}
}
@inproceedings{HoffschmidtSchwarzerSpaeteetal.2006,
  author    = {Hoffschmidt, Bernhard and Schwarzer, Klemens and Sp{\"a}te, Frank and K{\"o}tter, Jens and Ebert, Miriam and Sierck, Olaf},
  title     = {Development of a small modular parabolic trough collector},
  series = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain},
  booktitle = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain},
  publisher = {SolarPaces},
  address   = {[o.O.]},
  organization    = {International Symposium on Concentrating Solar Power and Chemical Energy Systems <13, 2006, Sevilla>},
  isbn      = {8478345191},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@inproceedings{NursinskiStolbergGangatharanCzarnecki2016,
  author    = {Nursinski-Stolberg, Andr{\´e} and Gangatharan, Kiritharan and Czarnecki, Christian},
  title     = {Development of a subject-oriented reference process model for the telecommunications industry},
  series = {GI Edition Proceedings Band 259 INFORMATIK 2016},
  booktitle = {GI Edition Proceedings Band 259 INFORMATIK 2016},
  editor    = {Mayr, Heinrich C. and Pinzger, Martin},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Bonn},
  isbn      = {9783885796534},
  issn      = {1617-5468},
  pages     = {699 -- 712},
  year      = {2016},
  abstract  = {Generally the usage of reference models can be structured top-down or bottom-up. The practical need of agile change and flexible organizational implementation requires a consistent mapping to an operational level. In this context, well-established reference process models are typically structured top-down. The subject-oriented Business Process Management (sBPM) offers a modeling concept that is structured bottom-up and concentrates on the process actors on an operational level. This paper applies sBPM to the enhanced Telecom Operations Map (eTOM), a well-accepted reference process model in the telecommunications industry. The resulting design artifact is a concrete example for a combination of a bottom-up and top-down developed reference model. The results are evaluated and confirmed in practical context through the involvement of the industry body TMForum.},
  language  = {en}
}
@inproceedings{HunkerJungGossmannetal.2019,
  author    = {Hunker, Jan and Jung, Alexander and Goßmann, Matthias and Linder, Peter and Staat, Manfred},
  title     = {Development of a tool to analyze the conduction speed in microelectrode array measurements of cardiac tissue},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {7 -- 8},
  year      = {2019},
  abstract  = {The discovery of human induced pluripotent stem cells reprogrammed from somatic cells [1] and their ability to differentiate into cardiomyocytes (hiPSC-CMs) has provided a robust platform for drug screening [2]. Drug screenings are essential in the development of new components, particularly for evaluating the potential of drugs to induce life-threatening pro-arrhythmias. Between 1988 and 2009, 14 drugs have been removed from the market for this reason [3]. The microelectrode array (MEA) technique is a robust tool for drug screening as it detects the field potentials (FPs) for the entire cell culture. Furthermore, the propagation of the field potential can be examined on an electrode basis. To analyze MEA measurements in detail, we have developed an open-source tool.},
  language  = {en}
}
@inproceedings{AchenbachGoettscheKaufholdetal.2011,
  author    = {Achenbach, Timm and G{\"o}ttsche, Joachim and Kaufhold, O. and Hoffschmidt, Bernhard},
  title     = {Development of an edge module for open volumetric receiver for the use of the radiation at the receiver boundary region},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}
@inproceedings{GrundAltherr2023,
  author    = {Grund, Raphael M. and Altherr, Lena},
  title     = {Development of an open source energy disaggregation tool for the home automation platform Home Assistant},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.02},
  pages     = {11 -- 20},
  year      = {2023},
  abstract  = {In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.},
  language  = {en}
}
@inproceedings{TeixeiraBouraNiederwestbergMcLeodetal.2016,
  author    = {Teixeira Boura, Cristiano Jos{\´e} and Niederwestberg, Stefan and McLeod, Jacqueline and Herrmann, Ulf and Hoffschmidt, Bernhard},
  title     = {Development of heat exchanger for high temperature energy storage with bulk materials},
  series = {AIP Conference Proceedings},
  volume    = {1734},
  booktitle = {AIP Conference Proceedings},
  number    = {1},
  doi       = {10.1063/1.4949106},
  pages     = {050008-1 -- 050008-7},
  year      = {2016},
  language  = {en}
}
@inproceedings{SattlerSchneiderAngeleetal.2022,
  author    = {Sattler, Johannes Christoph and Schneider, Iesse Peer and Angele, Florian and Atti, Vikrama and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Development of heliostat field calibration methods: Theory and experimental test results},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {Vol. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.678},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut J{\"u}lich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.},
  language  = {en}
}
@inproceedings{NeumannAdamBackesetal.2021,
  author    = {Neumann, Hannah and Adam, Mario and Backes, Klaus and B{\"o}rner, Martin and Clees, Tanja and Doetsch, Christian and Glaeser, Susanne and Herrmann, Ulf and May, Johanna and Rosenthal, Florian and Sauer, Dirk Uwe and Stadler, Ingo},
  title     = {Development of open educational resources for renewable energy and the energy transition process},
  series = {ISES SWC 2021},
  booktitle = {ISES SWC 2021},
  publisher = {International Solar Energy Society},
  address   = {Freiburg},
  doi       = {10.18086/swc.2021.47.03},
  pages     = {6 Seiten},
  year      = {2021},
  abstract  = {The dissemination of knowledge about renewable energies is understood as a social task with the highest topicality. The transfer of teaching content on renewable energies into digital open educational resources offers the opportunity to significantly accelerate the implementation of the energy transition. Thus, in the here presented project six German universities create open educational resources for the energy transition. These materials are available to the public on the internet under a free license. So far there has been no publicly accessible, editable media that cover entire learning units about renewable energies extensively and in high technical quality. Thus, in this project, the content that remains up-to-date for a longer period is appropriately prepared in terms of media didactics. The materials enable lecturers to provide students with in-depth training about technologies for the energy transition. In a particular way, the created material is also suitable for making the general public knowledgeable about the energy transition with scientifically based material.},
  language  = {en}
}
@inproceedings{MilkovaRosinButenwegetal.2018,
  author    = {Milkova, Kristina and Rosin, Julia and Butenweg, Christoph and Dumova-Jovanoska, Elena},
  title     = {Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 10},
  year      = {2018},
  language  = {en}
}
@inproceedings{AdamsLosekammCzupalla2020,
  author    = {Adams, Moritz and Losekamm, Martin J. and Czupalla, Markus},
  title     = {Development of the Thermal Control System for the RadMap Telescope Experiment on the International Space Station},
  series = {International Conference on Environmental Systems},
  booktitle = {International Conference on Environmental Systems},
  pages     = {1 -- 10},
  year      = {2020},
  language  = {en}
}
@inproceedings{TamaldinMansorMatYaminetal.2022,
  author    = {Tamaldin, Noreffendy and Mansor, Muhd Rizuan and Mat Yamin, Ahmad Kamal and Bin Abdollah, Mohd Fazli and Esch, Thomas and Tonoli, Andrea and Reisinger, Karl Heinz and Sprenger, Hanna and Razuli, Hisham},
  title     = {Development of UTeM United Future Fuel Design Training Center Under Erasmus+ United Program},
  series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  editor    = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana},
  publisher = {Springer Nature},
  address   = {Singapore},
  isbn      = {978-981-19-3178-9},
  issn      = {2195-4356},
  doi       = {10.1007/978-981-19-3179-6_50},
  pages     = {274 -- 278},
  year      = {2022},
  abstract  = {The industrial revolution IR4.0 era have driven many states of the art technologies to be introduced especially in the automotive industry. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South-East Asia (SEA). Indulging this situation, FH Joanneum, Austria together with European partners from FH Aachen, Germany and Politecnico Di Torino, Italy is taking initiative to close the gap utilizing the Erasmus+ United grant from EU. A consortium was founded to engage with automotive technology transfer using the European ramework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative, and high-quality training courses to increase graduate's employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing Universityindustry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.},
  language  = {en}
}
@inproceedings{LeiseBreuerAltherretal.2020,
  author    = {Leise, Philipp and Breuer, Tim and Altherr, Lena and Pelz, Peter F.},
  title     = {Development, validation and assessment of a resilient pumping system},
  series = {Proceedings of the Joint International Resilience Conference, JIRC2020},
  booktitle = {Proceedings of the Joint International Resilience Conference, JIRC2020},
  isbn      = {978-90-365-5095-6},
  pages     = {97 -- 100},
  year      = {2020},
  abstract  = {The development of resilient technical systems is a challenging task, as the system should adapt automatically to unknown disturbances and component failures. To evaluate different approaches for deriving resilient technical system designs, we developed a modular test rig that is based on a pumping system. On the basis of this example system, we present metrics to quantify resilience and an algorithmic approach to improve resilience. This approach enables the pumping system to automatically react on unknown disturbances and to reduce the impact of component failures. In this case, the system is able to automatically adapt its topology by activating additional valves. This enables the system to still reach a minimum performance, even in case of failures. Furthermore, timedependent disturbances are evaluated continuously, deviations from the original state are automatically detected and anticipated in the future. This allows to reduce the impact of future disturbances and leads to a more resilient system behaviour.},
  language  = {en}
}
@inproceedings{HorikawaKazariOkadaetal.2015,
  author    = {Horikawa, Atsushi and Kazari, Masahide and Okada, Kunio and Funke, Harald and Keinz, Jan and Kusterer, Karsten and Haji Ayed, Anis},
  title     = {Developments of Hydrogen Dry Low Emission Combustion Technology},
  series = {Annual Congress of Gas Turbine Society Japan, 2015},
  booktitle = {Annual Congress of Gas Turbine Society Japan, 2015},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{TippkoetterMoehringMaureretal.2013,
  author    = {Tippk{\"o}tter, Nils and M{\"o}hring, S. and Maurer, S. and Roth, J.},
  title     = {Dezentrale Vorbehandlung und Verarbeitung pflanzlicher Reststoffe f{\"u}r Bioraffinerien},
  series = {Kurzfassungen der Vortr{\"a}ge nach Sessions : Fr{\"u}hjahrstagung der Biotechnologen 2013, 4. - 5. M{\"a}rz 2013, Dechema-Haus, Frankfurt am Main},
  booktitle = {Kurzfassungen der Vortr{\"a}ge nach Sessions : Fr{\"u}hjahrstagung der Biotechnologen 2013, 4. - 5. M{\"a}rz 2013, Dechema-Haus, Frankfurt am Main},
  address   = {Frankfurt am Main},
  pages     = {5},
  year      = {2013},
  language  = {de}
}
@inproceedings{Goldbach2014,
  author    = {Goldbach, Daniel},
  title     = {Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit},
  series = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)},
  booktitle = {AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beitr{\"a}ge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)},
  editor    = {Wahl, Michael},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3580-8},
  pages     = {172 -- 179},
  year      = {2014},
  language  = {de}
}
@inproceedings{VedralWollert2006,
  author    = {Vedral, Andreas and Wollert, J{\"o}rg},
  title     = {Die Analyse industrieller funkgest{\"u}tzter Kommunikationskan{\"a}le},
  series = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg},
  booktitle = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {9783800729944},
  pages     = {279 -- 288},
  year      = {2006},
  language  = {de}
}
@inproceedings{MelissSchwarzerSpaeteetal.1992,
  author    = {Meliß, Michael and Schwarzer, Klemens and Sp{\"a}te, F. and Neskakis, A. and Buck, H.},
  title     = {Die Arbeitsgemeinschaft Solar Nordrhein-Westfalen, Schwerpunkt B: Dezentrale Energietechnologien},
  series = {Energie und unsere Umwelt. 8. Internationales Sonnenforum '92, 30. Juni - 3. Juli 1992. Bd. 2},
  booktitle = {Energie und unsere Umwelt. 8. Internationales Sonnenforum '92, 30. Juni - 3. Juli 1992. Bd. 2},
  publisher = {DGS-Sonnenenergie-Verl.},
  address   = {M{\"u}nchen},
  pages     = {1439 -- 1444},
  year      = {1992},
  language  = {de}
}
@inproceedings{Fissabre2015,
  author    = {Fissabre, Anke},
  title     = {Die Augsburger Dachterrassen der Renaissance},
  series = {Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht {\"u}ber die Tagung des Arbeitskreises f{\"u}r Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.},
  booktitle = {Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht {\"u}ber die Tagung des Arbeitskreises f{\"u}r Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.},
  publisher = {Jonas Verlag f{\"u}r Kunst und Literatur},
  address   = {Marburg},
  isbn      = {978-3-89445-517-0},
  pages     = {571 -- 585},
  year      = {2015},
  language  = {de}
}
@inproceedings{ButenwegBettziecheKuhlmannetal.2005,
  author    = {Butenweg, Christoph and Bettzieche, Volker and Kuhlmann, Wolfram and Meskouris, Konstantin},
  title     = {Die baudynamische Beurteilung von Talsperren am Beispiel der F{\"u}rwiggetalsperre},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  publisher = {Inst. f{\"u}r Statik und Dynamik der Tragwerke},
  address   = {Dresden},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2005, Dresden>},
  isbn      = {3-00-015456-6},
  pages     = {73 -- 84},
  year      = {2005},
  language  = {de}
}
@inproceedings{Ritz2007,
  author    = {Ritz, Thomas},
  title     = {Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware},
  series = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany},
  booktitle = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany},
  editor    = {K{\"o}nig-Ries, Brigitta},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-198-0},
  pages     = {23 -- 35},
  year      = {2007},
  language  = {de}
}
@inproceedings{DonnerRabelScholletal.2019,
  author    = {Donner, Ralf and Rabel, Matthias and Scholl, Ingrid and Ferrein, Alexander and Donner, Marc and Geier, Andreas and John, Andr{\´e} and K{\"o}hler, Christian and Varga, Sebastian},
  title     = {Die Extraktion bergbaulich relevanter Merkmale aus 3D-Punktwolken eines untertagetauglichen mobilen Multisensorsystems},
  series = {Tagungsband Geomonitoring},
  booktitle = {Tagungsband Geomonitoring},
  doi       = {10.15488/4515},
  pages     = {91 -- 110},
  year      = {2019},
  language  = {de}
}
@inproceedings{Kern2013,
  author    = {Kern, Alexander},
  title     = {Die neue DIN EN 62305-2 (VDE 0185-305-2) Ed.2:2013-02 - {\"A}nderungen zur Ed.l und zugeh{\"o}rige Beibl{\"a}tter},
  series = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)},
  booktitle = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  organization    = {Blitzschutztagung <10, 2013, Neu-Ulm>},
  isbn      = {978-3-8007-3540-2},
  pages     = {9 -- 16},
  year      = {2013},
  language  = {de}
}
@inproceedings{RoethStark2009,
  author    = {R{\"o}th, Thilo and Stark, R.},
  title     = {Die Rolle der virtuellen Produktentstehung bei der Integration von Karosseriesystemen},
  series = {Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. M{\"a}rz 2009 in Baden-Baden / Kongressleitung: Reiner Stark},
  booktitle = {Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. M{\"a}rz 2009 in Baden-Baden / Kongressleitung: Reiner Stark},
  publisher = {VDI-Wissensforum},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-9812624-4-5},
  pages     = {175 S. : zahlr. Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@inproceedings{DroszezSannoGoldmannetal.2016,
  author    = {Droszez, Anna and Sanno, Maximilian and Goldmann, Jan-Peter and Albracht, Kirsten and Br{\"u}ggemann, Gerd-Peter and Braunstein, Bjoern},
  title     = {Differences between take-off behavior during vertical jumps and two artistic elements},
  series = {34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016},
  booktitle = {34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016},
  issn      = {1999-4168},
  pages     = {577 -- 580},
  year      = {2016},
  language  = {en}
}
@inproceedings{AltherrDoeringFrauenrathetal.2024,
  author    = {Altherr, Lena and D{\"o}ring, Bernd and Frauenrath, Tobias and Groß, Rolf and Mohan, Nijanthan and Oyen, Marc and Schnittcher, Lukas and Voß, Norbert},
  title     = {DiggiTwin: ein interdisziplin{\"a}res Projekt zur Nutzung digitaler Zwillinge auf dem Weg zu einem klimaneutralen Geb{\"a}udebestand},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.67},
  pages     = {341 -- 346},
  year      = {2024},
  abstract  = {Im Hinblick auf die Klimaziele der Bundesrepublik Deutschland konzentriert sich das Projekt Diggi Twin auf die nachhaltige Geb{\"a}udeoptimierung. Grundlage f{\"u}r eine ganzheitliche Geb{\"a}ude{\"u}berwachung und -optimierung bildet dabei die Digitalisierung und Automation im Sinne eines Smart Buildings. Das interdisziplin{\"a}re Projekt der FH Aachen hat das Ziel, ein bestehendes Hochschulgeb{\"a}ude und einen Neubau an klimaneutrale Standards anzupassen. Im Rahmen des Projekts werden bekannte Verfahren, wie das Building Information Modeling (BIM), so erweitert, dass ein digitaler Geb{\"a}udezwilling entsteht. Dieser kann zur Optimierung des Geb{\"a}udebetriebs herangezogen werden, sowie als Basis f{\"u}r eine Erweiterung des Bewertungssystems Nachhaltiges Bauen (BNB) dienen. Mithilfe von Sensortechnologie und k{\"u}nstlicher Intelligenz kann so ein pr{\"a}zises Monitoring wichtiger Geb{\"a}udedaten erfolgen, um ungenutzte Energieeinsparpotenziale zu erkennen und zu nutzen. Das Projekt erforscht und setzt methodische Erkenntnisse zu BIM und digitalen Geb{\"a}udezwillingen praxisnah um, indem es spezifische Fragen zur Energie- und Ressourceneffizienz von Geb{\"a}uden untersucht und konkrete L{\"o}sungen f{\"u}r die Geb{\"a}udeoptimierung entwickelt.},
  language  = {de}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGrossUlbrich2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz and Ulbrich, Michelle},
  title     = {Digital planning using building information modelling and virtual reality: new approach for students' remote practical training under lockdown conditions in the course of smart building engineering},
  series = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  booktitle = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  publisher = {ISTES Organization},
  address   = {San Antonio, TX},
  isbn      = {978-1-952092-17-6},
  pages     = {118 -- 123},
  year      = {2021},
  abstract  = {The worldwide Corona pandemic has severely restricted student projects in the higher semesters of engineering courses. In order not to delay the graduation, a new concept had to be developed for projects under lockdown conditions. Therefore, unused rooms at the university should be digitally recorded in order to develop a new usage concept as laboratory rooms. An inventory of the actual state of the rooms was done first by taking photos and listing up all flaws and peculiarities. After that, a digital site measuring was done with a 360° laser scanner and these recorded scans were linked to a coherent point cloud and transferred to a software for planning technical building services and supporting Building Information Modelling (BIM). In order to better illustrate the difference between the actual and target state, two virtual reality models were created for realistic demonstration. During the project, the students had to go through the entire digital planning phases. Technical specifications had to be complied with, as well as documentation, time planning and cost estimate. This project turned out to be an excellent alternative to on-site practical training under lockdown conditions and increased the students' motivation to deal with complex technical questions.},
  language  = {en}
}
@inproceedings{UlmerMostafaWollert2022,
  author    = {Ulmer, Jessica and Mostafa, Youssef and Wollert, J{\"o}rg},
  title     = {Digital Twin Academy: From Zero to Hero through individual learning experiences},
  series = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  booktitle = {Tagungsband AALE 2022 / Herausgegeben von der Hochschule f{\"u}r Technik, Wirtschaft und Kultur Leipzig},
  isbn      = {978-3-910103-00-9},
  doi       = {10.33968/2022.33},
  url       = {http://nbn-resolving.de/urn:nbn:de:bsz:l189-qucosa2-776097},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules.},
  language  = {en}
}
@inproceedings{Pieper2018,
  author    = {Pieper, Martin},
  title     = {Digitale Hochschullehre in mathematischen und mathematikdidaktischen Veranstaltungen},
  series = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 1},
  booktitle = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 1},
  publisher = {WTM-Verlag},
  address   = {M{\"u}nster},
  isbn      = {978-3-95987-089-4},
  pages     = {105 -- 106},
  year      = {2018},
  language  = {de}
}
@inproceedings{TranMatthiesStavroulakisetal.2018,
  author    = {Tran, Ngoc Trinh and Matthies, Hermann G. and Stavroulakis, Georgios Eleftherios and Staat, Manfred},
  title     = {Direct plastic structural design by chance constrained programming},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {12 Seiten},
  year      = {2018},
  abstract  = {We propose a stochastic programming method to analyse limit and shakedown of structures under random strength with lognormal distribution. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit or the shakedown limit. The edge-based smoothed finite element method (ES-FEM) using three-node linear triangular elements is used.},
  language  = {en}
}
@inproceedings{SchollSuderSchiffer2018,
  author    = {Scholl, Ingrid and Suder, Sebastian and Schiffer, Stefan},
  title     = {Direct Volume Rendering in Virtual Reality},
  series = {Bildverarbeitung f{\"u}r die Medizin 2018},
  booktitle = {Bildverarbeitung f{\"u}r die Medizin 2018},
  publisher = {Springer Vieweg},
  address   = {Berlin},
  isbn      = {978-3-662-56537-7},
  doi       = {10.1007/978-3-662-56537-7_79},
  pages     = {297 -- 302},
  year      = {2018},
  language  = {en}
}
@inproceedings{Ritz2001,
  author    = {Ritz, Thomas},
  title     = {DISMED - an innovation portal for printing and media industry},
  series = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  booktitle = {CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000},
  publisher = {CORDIS Archive},
  address   = {[s.l.]},
  pages     = {9 S. : graph. Darst.},
  year      = {2001},
  language  = {en}
}
@inproceedings{ButenwegGellert2008,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Displacement based design of masonry structures},
  series = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  booktitle = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  publisher = {University of Newcastle},
  address   = {Callaghan},
  organization    = {International Brick and Block Masonry Conference <14, 2008, Sydney>},
  isbn      = {978-19-2070-1-92-5},
  pages     = {1 -- 10},
  year      = {2008},
  language  = {en}
}
@inproceedings{SteuerDankertLeichtScholten2019,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Diversity- and innovation management in complex engineering organizations},
  series = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia},
  booktitle = {7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia},
  editor    = {Tipurić, Darko and Hruška, Domagoj},
  publisher = {Governance Research and Development Centre (CIRU)},
  address   = {Zagreb},
  pages     = {136 -- 157},
  year      = {2019},
  abstract  = {Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.},
  language  = {en}
}
@inproceedings{WuBronderPoghossianetal.2014,
  author    = {Wu, Chunsheng and Bronder, Thomas and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 4},
  year      = {2014},
  language  = {en}
}
@inproceedings{SattlerAttiAlexopoulosetal.2022,
  author    = {Sattler, Johannes Christoph and Atti, Vikrama and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis},
  title     = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook},
  series = {SolarPACES conference proceedings},
  booktitle = {SolarPACES conference proceedings},
  number    = {VOL. 1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.731},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.},
  language  = {en}
}
@inproceedings{SuryoputriGhaderiLinderetal.2017,
  author    = {Suryoputri, Nathania and Ghaderi, Aydin and Linder, Peter and Kotliar, Konstantin and G{\"o}ttler, Jens and Sorg, Christian and Grimmer, Timo},
  title     = {Does hemodynamic response function change in Alzheimer disease?},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Erni, Daniel and Fischerauer, Alice and Himmel, J{\"o}rg and Seeger, Thomas and Thelen, Klaus},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {92},
  year      = {2017},
  language  = {en}
}
@inproceedings{CzarneckiDietze2017,
  author    = {Czarnecki, Christian and Dietze, Christian},
  title     = {Domain-Specific reference modeling in the telecommunications industry},
  series = {DESRIST 2017: Designing the Digital Transformation},
  booktitle = {DESRIST 2017: Designing the Digital Transformation},
  editor    = {Maedche, Alexander and vom Brocke, Jan and Hevner, Alan},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-59144-5},
  doi       = {10.1007/978-3-319-59144-5_19},
  pages     = {313 -- 329},
  year      = {2017},
  abstract  = {The telecommunications industry is currently going through a major transformation. In this context, the enhanced Telecom Operations Map (eTOM) is a domain-specific process reference model that is offered by the industry organization TM Forum. In practice, eTOM is well accepted and confirmed as de facto standard. It provides process definitions and process flows on different levels of detail. This article discusses the reference modeling of eTOM, i.e., the design, the resulting artifact, and its evaluation based on three project cases. The application of eTOM in three projects illustrates the design approach and concrete models on strategic and operational levels. The article follows the Design Science Research (DSR) paradigm. It contributes with concrete design artifacts to the transformational needs of the telecommunications industry and offers lessons-learned from a general DSR perspective.},
  language  = {en}
}
@inproceedings{WeingartSchneiderWollert2009,
  author    = {Weingart, Daniel and Schneider, Ulf and Wollert, J{\"o}rg},
  title     = {Doppelt gekoppelt - Kabellose und dynamische Anbindung von CANopen an Profinet IO},
  series = {Elektrische Automatisierung - Systeme und Komponenten: SPS-IPC-Drives 2009, Fachmesse \& Kongress, 24. - 26. Nov. 2009, N{\"u}rnberg ; [Tagungsband]},
  booktitle = {Elektrische Automatisierung - Systeme und Komponenten: SPS-IPC-Drives 2009, Fachmesse \& Kongress, 24. - 26. Nov. 2009, N{\"u}rnberg ; [Tagungsband]},
  publisher = {VDE-Verl.},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-8007-3184-8},
  pages     = {147 -- 154},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Schmidt, A. and Rossiter, E. and Loose, T.},
  title     = {Durchg{\"a}ngige Schweißsimulation der Eigenspannung und des Gef{\"u}gezustands auf Basis realer Schweißstromquellenparameter},
  series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>},
  isbn      = {978-3-87155-592-3},
  pages     = {37 -- 42},
  year      = {2010},
  language  = {de}
}
@inproceedings{DalguerChurilovButenwegetal.2014,
  author    = {Dalguer, Luis A. and Churilov, Sergey and Butenweg, Christoph and Renault, Philippe and Hyun, An Jun},
  title     = {Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS},
  series = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  booktitle = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  organization    = {Workshop SMART2013 <2014, Paris>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{JanotteFecklerKoetteretal.2014,
  author    = {Janotte, N. and Feckler, G. and K{\"o}tter, Jens and Decker, Stefan and Herrmann, Ulf and Schmitz, Mark and L{\"u}pfert, E.},
  title     = {Dynamic performance evaluation of the HelioTrough® collector demonstration loop : towards a new benchmark in parabolic trough qualification},
  series = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  booktitle = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-63266-904-9},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2014.03.012},
  pages     = {109 -- 117},
  year      = {2014},
  language  = {en}
}
@inproceedings{Golland2019,
  author    = {Golland, Alexander},
  title     = {Dynamic Pricing: Algorithmen zwischen {\"O}konomie und Datenschutz},
  series = {Die Macht der Daten und der Algorithmen - Regulierung von IT, IoT und KI},
  booktitle = {Die Macht der Daten und der Algorithmen - Regulierung von IT, IoT und KI},
  editor    = {Taeger, J{\"u}rgen},
  publisher = {OlWIR Verlag f{\"u}r Wirtschaft, Informatik und Recht},
  address   = {Edewecht},
  isbn      = {978-3-95599-061-9},
  pages     = {61 -- 75},
  year      = {2019},
  language  = {de}
}
@inproceedings{KorschDafnisReimerdesetal.2006,
  author    = {Korsch, Helge and Dafnis, Athanasios and Reimerdes, Hans-G{\"u}nther and Braun, Carsten and Ballmann, Josef},
  title     = {Dynamic qualification of the HIRENASD elastic wing model},
  series = {Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt. 2006},
  booktitle = {Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt. 2006},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)},
  address   = {Bonn},
  pages     = {1441 -- 1450},
  year      = {2006},
  language  = {en}
}
@inproceedings{SattlerAlexopoulosCaminosetal.2019,
  author    = {Sattler, Johannes, Christoph and Alexopoulos, Spiros and Caminos, Ricardo Alexander Chico and Mitchell, John C. and Ruiz, Victor C. and Kalogirou, Soteris and Ktistis, Panayiotis K. and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117663},
  pages     = {150007-1 -- 150007-8},
  year      = {2019},
  language  = {en}
}
@inproceedings{HirschAhlbrinkPitzPaaletal.2011,
  author    = {Hirsch, Tobias and Ahlbrink, Nils and Pitz-Paal, Robert and Teixeira Boura, Cristiano Jos{\´e} and Hoffschmidt, Bernhard and Gall, Jan and Abel, Dirk and Nolte, Vera and Wirsum, Manfred and Andersson, Joel and Diehl, Moritz},
  title     = {Dynamic simulation of a solar tower system with open volumetric receiver - a review on the ViCERP project},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}
@inproceedings{SattlerChicoCaminosAttietal.2020,
  author    = {Sattler, Johannes Christoph and Chico Caminos, Ricardo Alexander and Atti, Vikrama Nagababu and {\"U}rlings, Nicolas and Dutta, Siddharth and Ruiz, Victor and Kalogirou, Soteris and Ktistis, Panayiotis and Agathokleous, Rafaela and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Dynamic simulation tool for a performance evaluation and sensitivity study of a parabolic trough collector system with concrete thermal energy storage},
  series = {AIP Conference Proceedings 2303},
  booktitle = {AIP Conference Proceedings 2303},
  publisher = {American Institute of Physics},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/5.0029277},
  pages     = {160004},
  year      = {2020},
  language  = {de}
}
@inproceedings{HafnerHoellerWemhoeneretal.1998,
  author    = {Hafner, Bernd and H{\"o}ller, Robert and Wemh{\"o}ner, Carsten and Schwarzer, Klemens},
  title     = {Dynamische Simulation thermischer Speicher mit MATLAB},
  series = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  booktitle = {Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule K{\"o}ln / 11. Internationales Sonnenforum},
  publisher = {Solar Promotion},
  address   = {M{\"u}nchen},
  organization    = {Deutsche Gesellschaft f{\"u}r Sonnenenergie},
  pages     = {734 -- 740},
  year      = {1998},
  language  = {de}
}
@inproceedings{MandekarJentschLutzetal.2021,
  author    = {Mandekar, Swati and Jentsch, Lina and Lutz, Kai and Behbahani, Mehdi and Melnykowycz, Mark},
  title     = {Earable design analysis for sleep EEG measurements},
  series = {UbiComp '21},
  booktitle = {UbiComp '21},
  doi       = {10.1145/3460418.3479328},
  pages     = {171 -- 175},
  year      = {2021},
  abstract  = {Conventional EEG devices cannot be used in everyday life and hence, past decade research has been focused on Ear-EEG for mobile, at-home monitoring for various applications ranging from emotion detection to sleep monitoring. As the area available for electrode contact in the ear is limited, the electrode size and location play a vital role for an Ear-EEG system. In this investigation, we present a quantitative study of ear-electrodes with two electrode sizes at different locations in a wet and dry configuration. Electrode impedance scales inversely with size and ranges from 450 kΩ to 1.29 MΩ for dry and from 22 kΩ to 42 kΩ for wet contact at 10 Hz. For any size, the location in the ear canal with the lowest impedance is ELE (Left Ear Superior), presumably due to increased contact pressure caused by the outer-ear anatomy. The results can be used to optimize signal pickup and SNR for specific applications. We demonstrate this by recording sleep spindles during sleep onset with high quality (5.27 μVrms).},
  language  = {en}
}
@inproceedings{BalaskasHoffmeisterButenwegetal.2021,
  author    = {Balaskas, Georgios and Hoffmeister, Benno and Butenweg, Christoph and Pilz, Marco and Bauer, Anna},
  title     = {Earthquake early warning and response system based on intelligent seismic and monitoring sensors embedded in a communication platform and coupled with BIM models},
  series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {978-618-85072-5-8},
  issn      = {2623-3347},
  doi       = {10.7712/120121.8539.18855},
  pages     = {987 -- 998},
  year      = {2021},
  abstract  = {This paper describes the concept of an innovative, interdisciplinary, user-oriented earthquake warning and rapid response system coupled with a structural health monitoring system (SHM), capable to detect structural damages in real time. The novel system is based on interconnected decentralized seismic and structural health monitoring sensors. It is developed and will be exemplarily applied on critical infrastructures in Lower Rhine Region, in particular on a road bridge and within a chemical industrial facility. A communication network is responsible to exchange information between sensors and forward warnings and status reports about infrastructures'health condition to the concerned recipients (e.g., facility operators, local authorities). Safety measures such as emergency shutdowns are activated to mitigate structural damages and damage propagation. Local monitoring systems of the infrastructures are integrated in BIM models. The visualization of sensor data and the graphic representation of the detected damages provide spatial content to sensors data and serve as a useful and effective tool for the decision-making processes after an earthquake in the region under consideration.},
  language  = {en}
}
@inproceedings{AlhaskirTschescheLinkeetal.2023,
  author    = {Alhaskir, Mohamed and Tschesche, Matteo and Linke, Florian and Schriewer, Elisabeth and Weber, Yvonne and Wolking, Stefan and R{\"o}hrig, Rainer and Koch, Henner and Kutafina, Ekaterina},
  title     = {ECG matching: an approach to synchronize ECG datasets for data quality comparisons},
  series = {German Medical Data Sciences 2023 - Science. Close to People.},
  volume    = {307},
  booktitle = {German Medical Data Sciences 2023 - Science. Close to People.},
  editor    = {R{\"o}hrig, Rainer and Grabe, Niels and Haag, Martin and H{\"u}bner, Ursula and Sax, Ulrich and Schmidt, Carsten Oliver and Sedlmayr, Martin and Zapf, Antonia},
  publisher = {IOS Press},
  isbn      = {978-1-64368-428-4 (Print)},
  doi       = {10.3233/SHTI230718},
  pages     = {225 -- 232},
  year      = {2023},
  abstract  = {Clinical assessment of newly developed sensors is important for ensuring their validity. Comparing recordings of emerging electrocardiography (ECG) systems to a reference ECG system requires accurate synchronization of data from both devices. Current methods can be inefficient and prone to errors. To address this issue, three algorithms are presented to synchronize two ECG time series from different recording systems: Binned R-peak Correlation, R-R Interval Correlation, and Average R-peak Distance. These algorithms reduce ECG data to their cyclic features, mitigating inefficiencies and minimizing discrepancies between different recording systems. We evaluate the performance of these algorithms using high-quality data and then assess their robustness after manipulating the R-peaks. Our results show that R-R Interval Correlation was the most efficient, whereas the Average R-peak Distance and Binned R-peak Correlation were more robust against noisy data.},
  language  = {en}
}