@incollection{Gebhardt2013,
  author    = {Gebhardt, Andreas},
  title     = {Entwicklung der 3D-Drucktechnologie und Potenziale f{\"u}r die Anwendung im Mittelstand},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-136-6},
  pages     = {55 -- 59},
  year      = {2013},
  language  = {de}
}
@incollection{Cordewiner2013,
  author    = {Cordewiner, Hans-Josef},
  title     = {Konstruktion im Wandel: von der technischen Zeichnung zum 3D-Produktmodell},
  series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978--3-86359-136-6},
  pages     = {115 -- 121},
  year      = {2013},
  language  = {de}
}
@article{PeekenBennerPlatt1989,
  author    = {Peeken, Heinz and Benner, Joachim and Platt, Werner},
  title     = {Ausfallkriterien elastomerbest{\"u}ckter Wellenkupplungen},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {11},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {85 -- 88},
  year      = {1989},
  language  = {de}
}
@article{Benner1989,
  author    = {Benner, Joachim},
  title     = {Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren},
  series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  volume    = {28},
  journal   = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.},
  number    = {12},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {0341-2652},
  pages     = {49 -- 54},
  year      = {1989},
  language  = {de}
}
@inproceedings{Benner1989,
  author    = {Benner, Joachim},
  title     = {Schwingungstechnische Dimensionierung von Maschinens{\"a}tzen mit Stromrichtermotoren},
  series = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)},
  booktitle = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)},
  editor    = {Peeken, Heinz},
  publisher = {Verl. T{\"U}V Rheinland},
  address   = {K{\"o}ln},
  issn      = {3-88585-639-5},
  pages     = {309 -- 333},
  year      = {1989},
  language  = {de}
}
@inproceedings{PeekenTroederBenneretal.1986,
  author    = {Peeken, Heinz and Troeder, Christoph and Benner, Joachim and Platt, Werner},
  title     = {A new approach to describe the mechanical performance of flexible couplings in drive systems},
  series = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  booktitle = {Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo},
  publisher = {IFToMM},
  address   = {Tokyo},
  pages     = {159 -- 163},
  year      = {1986},
  language  = {en}
}
@techreport{BennerPlatt1986,
  author    = {Benner, Joachim and Platt, Werner},
  title     = {Dynamisches Verhalten drehelastischer Kupplungen unter Ber{\"u}cksichtigung allgemeiner Materialgleichungen und Einbeziehung von Ausfallkriterien : Abschlußbericht; Berichtszeitraum 01. 07. 81 - 31. 05. 85. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 221)},
  publisher = {Forschungsvereinigung Antriebstechnik e.V.},
  address   = {Frankfurt/M.},
  pages     = {149 S. : zahlr. Ill.},
  year      = {1986},
  language  = {de}
}
@techreport{Benner1982,
  author    = {Benner, Joachim},
  title     = {Dynamisches Verhalten drehelastischer Kupplungen unter Ber{\"u}cksichtigung allgemeiner Materialgleichungen und Einbeziehung von Ausfallkriterien : Literaturrecherche; Berichtszeitraum 1981 - 1982. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 132)},
  publisher = {Forschungsvereinigung Antriebstechnik e.V.},
  address   = {Frankfurt/M.},
  pages     = {113 S. : zahlr. Ill.},
  year      = {1982},
  language  = {de}
}
@article{AbdelLatifPeekenBenner1985,
  author    = {Abdel-Latif, Lotfie Ahmed and Peeken, Heinz and Benner, Joachim},
  title     = {Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)},
  series = {Journal of tribology},
  volume    = {107},
  journal   = {Journal of tribology},
  number    = {4},
  isbn      = {0742-4787},
  issn      = {1528-8897},
  pages     = {527 -- 537},
  year      = {1985},
  language  = {en}
}
@article{PeekenAbdelLatifBenner1985,
  author    = {Peeken, Heinz and Abdel-Latif, Lotfie Ahmed and Benner, Joachim},
  title     = {Einfluss der {\"O}lversch{\"a}umung auf Axiallager mit Kreis- und Michell-Segmenten},
  series = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  volume    = {127},
  journal   = {VDI-Z : Zeitschrift f{\"u}r integrierte Produktion},
  number    = {5},
  publisher = {Springer-VDI-Verl},
  address   = {D{\"u}sseldorf},
  issn      = {0042-1766},
  pages     = {145 -- 151},
  year      = {1985},
  language  = {de}
}
@inproceedings{PeekenBenner1985,
  author    = {Peeken, Heinz and Benner, Joachim},
  title     = {Beeintr{\"a}chtigung des Druckaufbaus in Gleitlagern durch Schmierstoffversch{\"a}umung},
  series = {Gleit- und W{\"a}lzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. M{\"a}rz 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)},
  booktitle = {Gleit- und W{\"a}lzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. M{\"a}rz 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)},
  isbn      = {3-18-090549-2},
  issn      = {0083-5560},
  pages     = {373 -- 397},
  year      = {1985},
  language  = {de}
}
@article{PeekenBenner1984,
  author    = {Peeken, Heinz and Benner, Joachim},
  title     = {Berechnung von hydrodynamischen Radial- und Axiallagern},
  series = {Goldschmidt informiert : aus der Arbeit der Th. Goldschmidt AG, Chemische Fabriken},
  volume    = {61},
  journal   = {Goldschmidt informiert : aus der Arbeit der Th. Goldschmidt AG, Chemische Fabriken},
  number    = {2},
  publisher = {Goldschmidt},
  address   = {Essen},
  issn      = {0340-8507},
  pages     = {42 -- 48},
  year      = {1984},
  language  = {de}
}
@phdthesis{Benner1984,
  author    = {Benner, Joachim},
  title     = {Experimentelle Untersuchungen des mechanischen Verhaltens drehnachgiebiger Wellenkupplungen und Entwicklung eines Ersatzmodells},
  pages     = {147 S. : graph. Darst.},
  year      = {1984},
  language  = {de}
}
@article{TroederBennerSpielvogeletal.1986,
  author    = {Troeder, Christoph and Benner, Joachim and Spielvogel, A. and Platt, Werner},
  title     = {Expertensystem w{\"a}hlt und dimensioniert drehelastische Kupplungen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {78},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {1},
  publisher = {Binkert Medien},
  address   = {Laufenburg},
  issn      = {0040-1498},
  pages     = {92 -- 95},
  year      = {1986},
  language  = {de}
}
@article{AbdelLatifPeekenBenner1985,
  author    = {Abdel-Latif, Lotfie Ahmed and Peeken, Heinz and Benner, Joachim},
  title     = {Термогидродинамический расчет упорных подшипников с круговыми подушками на масляной пленке, содержащей пузырьки газа},
  series = {Проблемы трения и смазки},
  volume    = {107},
  journal   = {Проблемы трения и смазки},
  number    = {4},
  pages     = {94 -- 102},
  year      = {1985},
  language  = {ru}
}
@misc{TroederBennerAltherretal.1999,
  author    = {Troeder, Christoph and Benner, Joachim and Altherr, Marcel and Schiessl, Helmut F.},
  title     = {Topfspinnvorrichtung : [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt ; Weltorganisation f{\"u}r Geistiges Eigentum},
  address   = {M{\"u}nchen ; Genf},
  year      = {1999},
  abstract  = {"The invention relates to a pot spinning device (1) comprising a thread guide (9) which can be moved backwards and forwards and introduced into an opening (8) on the end side of the pot (7) so as to deposit a thread on the inside wall of a spinning pot. In order to improve upon pot spinning devices of this kind, the spinning pot is connected to an electric drive mechanism (10), mounted in magnetic bearings and provided with a gastight housing. Said housing encompasses the spinning pot (7), is open in the area where there is an opening in the end side of the pot and is provided with a seal (19) to seal off the intermediate area (17) between the housing and spinning pot. The housing is also connected to a supply of light-gas via a feed line (18), thereby enabling a light-gas atmosphere to be maintained in the intermediate area."},
  language  = {de}
}
@inproceedings{BeerHaidnWillms1995,
  author    = {Beer, Stefan and Haidn, O.J. and Willms, Herbert},
  title     = {Control of stoichiometric propellant supply in an H2/O2-spinning reserve system},
  series = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  booktitle = {Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)},
  editor    = {Carvalho, Maria da Gra{\c{c}}a},
  publisher = {Gordon and Breach},
  address   = {Basel [u.a.]},
  isbn      = {2-88124-619-2},
  pages     = {825 -- 838},
  year      = {1995},
  language  = {en}
}
@inproceedings{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow},
  series = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  booktitle = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  editor    = {Skupinski, Edwin},
  publisher = {Graham \& Trotman [u.a.]},
  address   = {London Gaithersburg, Md.},
  isbn      = {0-86010-678-0},
  pages     = {294 -- 304},
  year      = {1984},
  language  = {en}
}
@techreport{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow : final report. - (Euratom-publications-EUR ; 9593 : Nuclear science and technology)},
  publisher = {Commission of the European Communities},
  address   = {Luxembourg},
  isbn      = {92-825-4699-3},
  pages     = {III, 119 S.},
  year      = {1984},
  language  = {en}
}
@article{HennPolaczek2007,
  author    = {Henn, Gudrun and Polaczek, Christa},
  title     = {Studienerfolg in den Ingenieurwissenschaften},
  series = {Das Hochschulwesen : HSW ; Forum f{\"u}r Hochschulforschung, -praxis und -politik},
  volume    = {55},
  journal   = {Das Hochschulwesen : HSW ; Forum f{\"u}r Hochschulforschung, -praxis und -politik},
  number    = {5},
  issn      = {0018-2974},
  pages     = {144 -- 147},
  year      = {2007},
  language  = {de}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@article{AnikTopuzTuncel1992,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {44},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {2},
  issn      = {0036},
  pages     = {97 -- 100},
  year      = {1992},
  language  = {de}
}
@article{AnikTopuzTuncel1991,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X 210 Cr 12 und 25 MoCr 4 auf ihre mechanischen Eigenschaften},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {6},
  issn      = {0036-7184},
  pages     = {341 -- 344},
  year      = {1991},
  language  = {de}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The calculation of component activities of binary metallic melts from their gas solubilities},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {76},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {2},
  issn      = {0044-3093},
  pages     = {135 -- 137},
  year      = {1985},
  language  = {en}
}
@book{Anik1983,
  author    = {Anik, Sabri},
  title     = {Zum L{\"o}sungsverhalten von Sauerstoff in bin{\"a}ren Legierungen unter besonderer Ber{\"u}cksichtigung experimenteller Ergebnisse am System Kupfer-Sauerstoff-Wismut bei 1200 Grad C},
  number    = {Mikroform},
  pages     = {89, 28 S. ; 2 Mikrofiches 24x},
  year      = {1983},
  language  = {de}
}
@inproceedings{AnikFrohberg1989,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten metallic alloys},
  series = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  booktitle = {Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)},
  editor    = {Brodowsky, Horst},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-0434-9},
  pages     = {419 -- 428},
  year      = {1989},
  language  = {en}
}
@article{AnikFrohbergKapoor1982,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C},
  series = {Zeitschrift f{\"u}r Physikalische Chemie},
  volume    = {133},
  journal   = {Zeitschrift f{\"u}r Physikalische Chemie},
  number    = {2},
  issn      = {0942-9352},
  pages     = {167 -- 174},
  year      = {1982},
  language  = {de}
}
@article{AnikAnik1991,
  author    = {Anik, Sabri and Anik, Salahaddin},
  title     = {Stand der Schweißtechnik in der T{\"u}rkei},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {3},
  issn      = {0036-7184},
  pages     = {142 -- 145},
  year      = {1991},
  language  = {de}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {88},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {8},
  issn      = {0940-483X},
  pages     = {707 -- 710},
  year      = {1984},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Experiments and theoretical considerations on the solution of oxygen in binary metal alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {87},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {12},
  issn      = {0005-9021},
  pages     = {1201 -- 1204},
  year      = {1983},
  language  = {en}
}
@article{FrohbergAnik1985,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Thermodynamic relations between component activities and gas solubilities in binary metallic systems},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {89},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {2},
  issn      = {0940-483X},
  pages     = {130 -- 134},
  year      = {1985},
  language  = {en}
}
@article{AnikFrohberg1987,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {91},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {7},
  issn      = {0940-483X},
  pages     = {790 -- 794},
  year      = {1987},
  language  = {en}
}
@article{WangAnikFrohberg1988,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {79},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {5},
  issn      = {0044-3093},
  pages     = {336 -- 339},
  year      = {1988},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {75},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {586 -- 589},
  year      = {1984},
  language  = {en}
}
@article{FrohbergAnik1983,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {10},
  issn      = {0044-3093},
  pages     = {665 -- 666},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohberg1983,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {530 -- 534},
  year      = {1983},
  language  = {en}
}
@article{AnikKapoorFrohberg1983,
  author    = {Anik, Sabri and Kapoor, Madan Lal and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten substitutional alloy solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {1},
  issn      = {0044-3093},
  pages     = {53 -- 58},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Prediction of thermodynamic properties of oxygen in binary metallic solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {6},
  issn      = {0044-3093},
  pages     = {372 -- 375},
  year      = {1983},
  language  = {en}
}
@article{FrohbergAnik1984,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {{\"U}ber die Voraussetzungen der Wasserstoffl{\"o}slichkeit in bin{\"a}ren Eisenschmelzen},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  volume    = {55},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  number    = {2},
  issn      = {0003-8962},
  pages     = {45 -- 48},
  year      = {1984},
  language  = {de}
}
@article{FrohbergAnik1984,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Die Vorausbestimmung der Stickstoffl{\"o}slichkeit in bin{\"a}ren Eisenschmelzen},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  volume    = {55},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen : Fachberichte},
  number    = {8},
  issn      = {0003-8962},
  pages     = {365 -- 367},
  year      = {1984},
  language  = {de}
}
@article{AnikFrohberg1988,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the copper-antimony system at 1473K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {41},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {10},
  issn      = {0044-2658},
  pages     = {498 -- 501},
  year      = {1988},
  language  = {en}
}
@article{WangAnikFrohberg1987,
  author    = {Wang, Mao and Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the lead-antimony system at 1173 K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {40},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {6},
  issn      = {0044-2658},
  pages     = {316 -- 319},
  year      = {1987},
  language  = {en}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Untersuchungen zum L{\"o}sungsverhalten von Sauerstoff in Metallschmelzen},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {7},
  issn      = {0028-3207},
  pages     = {255 -- 258},
  year      = {1986},
  language  = {de}
}
@article{FrohbergAnik1986,
  author    = {Frohberg, Martin G. and Anik, Sabri},
  title     = {Experimentelle Ergebnisse zum L{\"o}sungsverhalten von Sauerstoff in den Systemen Cu-O-Bi und Cu-O-Pb},
  series = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  volume    = {31},
  journal   = {Neue H{\"u}tte : metallurgisch-metallkundliche Fachzeitschrift f{\"u}r Forschung und Praxis},
  number    = {9},
  issn      = {0028-3207},
  pages     = {344 -- 347},
  year      = {1986},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {26},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1978},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {39},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {37 -- 41},
  year      = {1978},
  language  = {de}
}
@article{AnikTuelbentci1973,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke beim Lichtbogenschweißen ; Teil 1},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {65},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {48},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {13 -- 15},
  year      = {1973},
  language  = {de}
}
@article{AnikTuelbentci1973,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 2},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {65},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {52},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1973},
  language  = {de}
}
@article{AnikTuelbentci1974,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 3},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {66},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {2},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {43 -- 47},
  year      = {1974},
  language  = {de}
}
@article{AnikDagsoez1971,
  author    = {Anik, Sabri and Dagsoez, A. K.},
  title     = {Feinbleche schweißen : die Temperaturverteilung in d{\"u}nnen Stahlblechplatten beim Lichtbogenschweißen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {63},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {9},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {57 -- 59},
  year      = {1971},
  language  = {de}
}
@inproceedings{DiltheyMundRaupachetal.2004,
  author    = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd},
  title     = {Improvement of textile reinforced concrete by polymer additives},
  series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  publisher = {BAM},
  address   = {Berlin},
  isbn      = {3-00-013706-8},
  pages     = {469 -- 476},
  year      = {2004},
  language  = {en}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@incollection{DiltheyBrandenburgSchleser2005,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Mikrokleben},
  series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-23706-8},
  pages     = {161 -- 172},
  year      = {2005},
  language  = {de}
}
@inproceedings{KolkmannGriesSchleseretal.2005,
  author    = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich},
  title     = {Innovative yarn structures and coatings for textile reinforced concrete},
  series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  address   = {Frankfurt a.M.},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@article{DiltheySchleserGessleretal.2005,
  author    = {Dilthey, Ulrich and Schleser, Markus and Geßler, Achim and Rettweiler, Timo and V{\"o}lling, Boris},
  title     = {Kleben textilbewehrter Betonbauteile},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  issn      = {0036-7184},
  pages     = {373 -- 377},
  year      = {2005},
  language  = {de}
}
@inproceedings{WalkLaufferRaupachDilgeretal.2004,
  author    = {Walk-Lauffer, Bernd and Raupach, Michael and Dilger, Klaus and B{\"o}hm, Stefan and Mundt, F. and Dilthey, Ulrich and Schleser, Markus},
  title     = {The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete},
  series = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  booktitle = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  publisher = {Liguori},
  address   = {Napoli},
  pages     = {150 -- 159},
  year      = {2004},
  language  = {en}
}
@inproceedings{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Simulation des Tropfen{\"u}bergangs beim MSG-Impulslichtbogenschweißen},
  series = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg},
  booktitle = {Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vortr{\"a}ge der Veranstaltung in Hamburg},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2011, Hamburg>},
  isbn      = {978-3-87155-267-0},
  pages     = {554 -- 559},
  year      = {2011},
  language  = {de}
}
@misc{SchoeneGlowaniaSchleseretal.2011,
  author    = {Schoene, Jens and Glowania, Michael and Schleser, Markus and Gries, Thomas and Reisgen, Uwe},
  title     = {Betonteil und Verfahren zum Bewehren von Teilen aus Beton / Offenlegungsschrift},
  publisher = {Dt. Patent- und Markenamt},
  address   = {M{\"u}nchen},
  pages     = {6 S. : graph. Darst.},
  year      = {2011},
  language  = {de}
}
@inproceedings{ReisgenSchleserSchoeneetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Schoene, Jens and Hegger, Josef and Gallwoszus, J{\"o}rg and Feldmann, Markus and Kopp, Maik and G{\"u}ndel, Max},
  title     = {Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete},
  series = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  booktitle = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions},
  editor    = {Cairns, John W.},
  publisher = {Publisher creations},
  address   = {Manerbio, Brescia},
  isbn      = {978-88-907078-3-4},
  pages     = {893 -- 898},
  year      = {2012},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.06.028},
  pages     = {255 -- 262},
  year      = {2012},
  abstract  = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.},
  language  = {en}
}
@article{ReisgenOlschokJakobsetal.2012,
  author    = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo},
  title     = {Laser beam submerged arc hybrid welding},
  series = {Physics procedia},
  volume    = {39},
  journal   = {Physics procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.016},
  pages     = {75 -- 83},
  year      = {2012},
  abstract  = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.},
  language  = {en}
}
@inproceedings{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ufer, Sebastian and Guenel, Ismet and Gach, Stefan},
  title     = {Voruntersuchungen mit Ansys CFX zu einer Druckstufe von einem Druckstufensystem f{\"u}r das Elektronenstrahlschweißen},
  series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken>},
  isbn      = {978-3-87155-593-0},
  pages     = {33 -- 35},
  year      = {2012},
  language  = {de}
}
@inproceedings{ReisgenSchleserThiele2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Thiele, Regina},
  title     = {Schweißverbindungen in Lithium-Ionen-Batterien},
  series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren},
  isbn      = {978-3-87155-593-0},
  pages     = {157 -- 161},
  year      = {2012},
  language  = {de}
}
@inproceedings{ReisgenSchleserEssersetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Essers, Marc and Thiele, Regina and Schiebahn, Alexander},
  title     = {Klebstofffixiertes R{\"u}hrreibschweißen von d{\"u}nnen Aluminiumblechen},
  series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren},
  isbn      = {978-3-87155-593-0},
  pages     = {20 -- 25},
  year      = {2012},
  language  = {de}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {64},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {166 -- 174},
  year      = {2012},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  editor    = {Brameshuber, Wolfgang},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>},
  isbn      = {978-2-35158-106-3},
  pages     = {153 -- 162},
  year      = {2010},
  language  = {en}
}
@article{HarmsReisgenSchleseretal.2010,
  author    = {Harms, Alexander and Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Thiele, Regina},
  title     = {Herausforderungen an die F{\"u}getechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug},
  series = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)},
  journal   = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)},
  issn      = {0179-079X},
  pages     = {58 -- 60},
  year      = {2010},
  language  = {de}
}
@incollection{HirtBleckBobzinetal.2011,
  author    = {Hirt, Gerhard and Bleck, Wolfgang and Bobzin, Kirsten and Schleser, Markus and [u.a.],},
  title     = {Hybride Produktionssysteme},
  series = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  booktitle = {Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder / hrsg. von Christian Brecher},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-20692-4 (Print) ; 978-3-642-20693-1 (E-Book)},
  doi       = {10.1007/978-3-642-20693-1_5},
  pages     = {465 -- 745},
  year      = {2011},
  abstract  = {W{\"a}hrend die virtuelle Produktentstehungskette große Gestaltungsfreir{\"a}ume bietet, ist die reale Produktentstehungskette durch wesentlich mehr Randbedingungen gekennzeichnet, die nicht oder nur ansatzweise beeinflussbar sind. Die Realisierung des aus logistischer Sicht optimalen One-Piece-Flow bei gleichzeitiger Steigerung von Flexibilit{\"a}t und Produktivit{\"a}t sowie des Verschiebens der Grenze des technologisch Machbaren m{\"u}ssen in zuk{\"u}nftigen Forschungsans{\"a}tzen gleichermaßen betrachtet werden. Die Grenzverschiebung auf Basis der Integration von Technologien ist dabei ein viel versprechender Ansatz, der es in vielen F{\"a}llen erm{\"o}glicht, in allen genannten Zielrichtungen gleichermaßen Potentiale zu erschließen.},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleseretal.2011,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub},
  title     = {Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Pr{\"u}fk{\"o}rpern},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-245-1},
  pages     = {73 -- 84},
  year      = {2011},
  language  = {de}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding},
  series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  publisher = {Paton Publ. House},
  address   = {Kiev},
  pages     = {104 -- 109},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Naumov, Andreas},
  title     = {Erweiterung des Parameterfelds zum R{\"u}hrreibschweißen mittels konduktiver Unterst{\"u}tzung},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 63},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 12},
  publisher = {DVS-Media GmbH},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {710 -- 714},
  year      = {2011},
  language  = {de}
}
@inproceedings{ReisgenSchleserScheiketal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.},
  title     = {Novel process chains for the production of plastics/metal-hybrids},
  series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  editor    = {Thoben, Klaus-Dieter},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Forschungsinstitut f{\"u}r Rationalisierung <Aachen> ; International Conference on Concurrent Enterprising <17, 2011, Aachen>},
  isbn      = {978-1-457-70772-8 ; 978-3-943024-05-0},
  pages     = {596 -- 604},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Thiele, Regina},
  title     = {Elektromobilit{\"a}t - Herausforderungen an die F{\"u}getechnik},
  series = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  volume    = {Jg. 1},
  journal   = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  number    = {Nr. 2},
  editor    = {Kampker, Achim},
  pages     = {16 -- 17},
  year      = {2011},
  language  = {de}
}
@techreport{BleckReisgenSchleseretal.2011,
  author    = {Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Prahl, Ulrich and Mukherjee, Krishnendu and Abdurakhmanov, Aydemir},
  title     = {Konsistentes Materialmodell f{\"u}r Umwandlung und mechanische Eigenschaften beim Schweißen hochfester Mehrphasen-St{\"a}hle : IGF-Vorhaben 15548 N. (FAT-Schriftenreihe ; 234)},
  publisher = {VDA},
  address   = {Berlin},
  organization    = {Forschungsvereinigung Automobiltechnik},
  pages     = {XVI, 17 - 174 S. Ill., graph. Darst.},
  year      = {2011},
  language  = {de}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus},
  title     = {Laser assisted joining of plastic metal hybrids},
  series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  journal   = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  organization    = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  pages     = {370 -- 377},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation},
  series = {Frontiers of materials science},
  volume    = {Vol. 5},
  journal   = {Frontiers of materials science},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2095-0268 (E-Journal); 2095-025X (Print)},
  pages     = {79 -- 89},
  year      = {2011},
  language  = {en}
}
@inproceedings{HuberBleckScheiketal.2011,
  author    = {Huber, Fr{\´e}d{\´e}ric and Bleck, Wolfgang and Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test},
  series = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  booktitle = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings},
  publisher = {Associazione Italiana di Metallurgia},
  address   = {Mailand},
  organization    = {International Conference on Zinc and Zinc Alloy Coated Steel Sheet <8, 2011, Genua>},
  isbn      = {978-88-85298-82-8},
  pages     = {Paper No. 43},
  year      = {2011},
  language  = {en}
}
@inproceedings{ChudobaKonradSchleseretal.2009,
  author    = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe},
  title     = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-122-5},
  pages     = {87 -- 98},
  year      = {2009},
  language  = {en}
}
@inproceedings{GoettscheHinschWittwer1992,
  author    = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker},
  title     = {Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique},
  series = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)},
  booktitle = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)},
  editor    = {Hugo-Le Goff, Anne},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-0901-4},
  pages     = {13 -- 25},
  year      = {1992},
  language  = {en}
}
@inproceedings{ReisgenSchleserStieglitz2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja},
  title     = {Kleben im Schienenfahrzeugbau},
  series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>},
  isbn      = {978-3-87155-584-8},
  pages     = {182 -- 186},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2009,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel and Feldmann, Markus},
  title     = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton},
  series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>},
  isbn      = {978-3-87155-584-8},
  pages     = {312 -- 318},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchleserScheik2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven},
  title     = {Fortschritte beim linienf{\"o}rmigen Mikrodispensen ungef{\"u}llter Klebstoffe},
  series = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009},
  booktitle = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009},
  editor    = {Vollertsen, Frank and B{\"u}ttgenbach, Stephanus},
  publisher = {BIAS Verl.},
  address   = {Bremen},
  organization    = {Kolloquium Mikroproduktion <4, 2009, Bremen>},
  isbn      = {978-3-933762-32-0},
  pages     = {43 -- 51},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam and Schmidt, Andre and Rossiter, Eduardo},
  title     = {Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter},
  series = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar},
  booktitle = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar},
  editor    = {Hildebrand, J{\"o}rg},
  publisher = {Univ.-Verl.},
  address   = {Weimar},
  isbn      = {978-3-86068-401-6},
  pages     = {32 -- 41},
  year      = {2009},
  language  = {de}
}
@inproceedings{RaupachOrlowskyBuettneretal.2006,
  author    = {Raupach, Michael and Orlowsky, Jeannette and B{\"u}ttner, T. and Dilthey, Ulrich and Schleser, Markus},
  title     = {Epoxy-impregnated textiles in concrete - load bearing capacity and durability},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {77 -- 88},
  year      = {2006},
  language  = {en}
}
@inproceedings{PakPiegelerFeldmannetal.2006,
  author    = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich},
  title     = {Hybrid joints of textile reinforced concrete parts - designed for assembly},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {181 -- 190},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleserChudobaetal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Chudoba, Rostislav and Konrad, Martin},
  title     = {Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics},
  series = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  booktitle = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  editor    = {Triantafillou, T. C.},
  publisher = {Univ.},
  address   = {Patras},
  organization    = {International Symposium on Fibre-Reinforced Polymer Reinforcement for Concrete Structures <8, 2007, Patras>},
  isbn      = {9608969107},
  pages     = {456 -- 457},
  year      = {2007},
  language  = {en}
}
@inproceedings{SchleserDiltheyMundetal.2007,
  author    = {Schleser, Markus and Dilthey, Ulrich and Mund, F. and B{\"o}hm, Stefan},
  title     = {Improvement of textile reinforced concrete by use of polymers},
  series = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)},
  booktitle = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)},
  editor    = {Czarnecki, Lech and Garbacz, Andrzej},
  publisher = {Aedificatio Publ.},
  address   = {Freiburg},
  isbn      = {978-3-931681-89-0},
  pages     = {153 -- 162},
  year      = {2007},
  language  = {en}
}
@inproceedings{DiltheySchleserHeggeretal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan},
  title     = {Load-bearing behaviour of polymer-impregnated textiles in concrete},
  series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  editor    = {Reinhardt, Hans W.},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>},
  isbn      = {978-2-35158-046-2},
  pages     = {183 -- 192},
  year      = {2007},
  language  = {en}
}
@article{FeldmannPakGessleretal.2008,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Schleser, Markus},
  title     = {Entwicklung eines Bemessungsmodells f{\"u}r punktf{\"o}rmige Verbindungen textibewehrter Betonbauteile},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Bd. 85},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {2},
  issn      = {0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351},
  pages     = {143 -- 147},
  year      = {2008},
  language  = {de}
}