@article{MedlinLangeBaumann1994,
  author    = {Medlin, L. K. and Lange, M. and Baumann, Marcus},
  title     = {Genetic differentiation among three colony-forming species of Phaeocystis : further evidence for the phylogeny of the Prymnesiophyta},
  series = {Phycologia},
  volume    = {Vol. 33},
  journal   = {Phycologia},
  number    = {Iss. 3},
  issn      = {0031-8884},
  pages     = {199 -- 212},
  year      = {1994},
  language  = {en}
}
@incollection{MedlinBarkerBaumannetal.1994,
  author    = {Medlin, L. K. and Barker, G. L. A. and Baumann, Marcus and Hayes, P. K.},
  title     = {Molecular biology and systematics},
  series = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  booktitle = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-857772-9},
  pages     = {393 -- 411},
  year      = {1994},
  language  = {en}
}
@inproceedings{MeckMuellerAltherretal.2020,
  author    = {Meck, Marvin M. and M{\"u}ller, Tim M. and Altherr, Lena and Pelz, Peter F.},
  title     = {Improving an industrial cooling system using MINLP, considering capital and operating costs},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48438-5 (Print)},
  doi       = {10.1007/978-3-030-48439-2_61},
  pages     = {505 -- 512},
  year      = {2020},
  abstract  = {The chemical industry is one of the most important industrial sectors in Germany in terms of manufacturing revenue. While thermodynamic boundary conditions often restrict the scope for reducing the energy consumption of core processes, secondary processes such as cooling offer scope for energy optimisation. In this contribution, we therefore model and optimise an existing cooling system. The technical boundary conditions of the model are provided by the operators, the German chemical company BASF SE. In order to systematically evaluate different degrees of freedom in topology and operation, we formulate and solve a Mixed-Integer Nonlinear Program (MINLP), and compare our optimisation results with the existing system.},
  language  = {en}
}
@incollection{McInnesBothmerDachwaldetal.2014,
  author    = {McInnes, Colin R. and Bothmer, Volker and Dachwald, Bernd and Geppert, Ulrich R. M. E. and Heiligers, Jeannette and Hilgers, Alan and Johnson, Les and Macdonald, Malcolm and Reinhard, Ruedeger and Seboldt, Wolfgang and Spietz, Peter},
  title     = {Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  pages     = {227 -- 242},
  year      = {2014},
  abstract  = {A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.},
  language  = {en}
}
@article{McArdellBarteltKowalski2007,
  author    = {McArdell, Brian W. and Bartelt, Perry and Kowalski, Julia},
  title     = {Field observations of basal forces and fluid pore pressure in a debris flow},
  series = {Geophysical Research Letters (GRL)},
  volume    = {34},
  journal   = {Geophysical Research Letters (GRL)},
  number    = {7},
  isbn      = {0094-8276},
  year      = {2007},
  abstract  = {Using results from an 8 m2 instrumented force plate we describe field measurements of normal and shear stresses, and fluid pore pressure for a debris flow. The flow depth increased from 0.1 to 1 m within the first 12 s of flow front arrival, remained relatively constant until 100 s, and then gradually decreased to 0.5 m by 600 s. Normal and shear stresses and pore fluid pressure varied in-phase with the flow depth. Calculated bulk densities are ρb = 2000-2250 kg m-3 for the bulk flow and ρf = 1600-1750 kg m-3 for the fluid phase. The ratio of effective normal stress to shear stress yields a Coulomb basal friction angle of ϕ = 26° at the flow front. We did not find a strong correlation between the degree of agitation in the flow, estimated using the signal from a geophone on the force plate, and an assumed dynamic pore fluid pressure. Our data support the idea that excess pore-fluid pressures are long lived in debris flows and therefore contribute to their unusual mobility.},
  language  = {en}
}
@misc{MayntzKeimerTegtmeyeretal.2021,
  author    = {Mayntz, Joscha and Keimer, Jona and Tegtmeyer, Philipp and Dahmann, Peter and Hille, Sebastian and Stumpf, Eike and Fisher, Alex and Dorrington, Graham},
  title     = {Aerodynamic Investigation on Efficient Inflight Transition of a Propeller from Propulsion to Regeneration Mode},
  series = {AIAA SCITECH 2022 Forum},
  journal   = {AIAA SCITECH 2022 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2022-0546},
  year      = {2021},
  abstract  = {This paper discusses a new way of inflight power regeneration for electric or hybrid-electric driven general aviation aircraft with one powertrain for both configurations. Three different approaches for the shift from propulsion to regeneration mode are analyzed. Numerical cal-culation and wind tunnel results are compared and show the highest regeneration potential for the "Windmill" approach, where the propeller blades are flipped, and rotation is reversed. A combination of all regeneration approaches for a realistic flight mission is discussed.},
  language  = {en}
}
@inproceedings{MayntzKeimerDahmannetal.2022,
  author    = {Mayntz, Joscha and Keimer, Jona and Dahmann, Peter and Hille, Sebastian and Stumpf, Eike and Fisher, Alex and Dorrington, Graham},
  title     = {Electrical Drive and Regeneration in General Aviation Flight with Propellers},
  series = {Deutscher Luft- und Raumfahrtkongress 2020},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2020},
  publisher = {DGLR},
  address   = {Bonn},
  doi       = {10.25967/530100},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {Electric flight has the potential for a more sustainable and energy-saving way of aviation compared to fossil fuel aviation. The electric motor can be used as a generator inflight to regenerate energy during descent. Three different approaches to regenerating with electric propeller powertrains are proposed in this paper. The powertrain is to be set up in a wind tunnel to determine the propeller efficiency in both working modes as well as the noise emissions. Furthermore, the planned flight tests are discussed. In preparation for these tests, a yaw stability analysis is performed with the result that the aeroplane is controllable during flight and in the most critical failure case. The paper shows the potential for inflight regeneration and addresses the research gaps in the dual role of electric powertrains for propulsion and regeneration of general aviation aircraft.},
  language  = {en}
}
@article{MayerHentschkeHageretal.2017,
  author    = {Mayer, Jan and Hentschke, Reinhard and Hager, Jonathan and Hojdis, Nils and Karimi-Varnaneh, Hossein Ali},
  title     = {A Nano-Mechanical Instability as Primary Contribution to Rolling Resistance},
  series = {Scientific Reports},
  volume    = {7},
  journal   = {Scientific Reports},
  number    = {Article number 11275},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2045-2322},
  year      = {2017},
  language  = {en}
}
@article{Mayer1997,
  author    = {Mayer, Claudia},
  title     = {L'Est{\´e}tique et le pouvoir: Le discours chaotique de l'Allemagne unifi{\´e}e},
  series = {Canadian review of comparative literature : CRCL = Revue canadienne de litt{\´e}rature compar{\´e}e : RCLC / Canadian Comparative Literature Association. 24 (1997), H. 2},
  journal   = {Canadian review of comparative literature : CRCL = Revue canadienne de litt{\´e}rature compar{\´e}e : RCLC / Canadian Comparative Literature Association. 24 (1997), H. 2},
  isbn      = {0319-051X},
  pages     = {297 -- 317},
  year      = {1997},
  language  = {en}
}
@article{Mayer1993,
  author    = {Mayer, Claudia},
  title     = {Between Trans- and Interdisciplinarity. »Germanistik« and the Dialectic of Inclusion and Exclusion of the Other(s)},
  series = {Language and literature today : proceedings of the XIXth triennal congress of the International Federation for Modern Languages and Literatures ; Bras{\´i}lia 22 - 30 August 1993. General ed. Neide de Faria.},
  journal   = {Language and literature today : proceedings of the XIXth triennal congress of the International Federation for Modern Languages and Literatures ; Bras{\´i}lia 22 - 30 August 1993. General ed. Neide de Faria.},
  publisher = {Univ.},
  address   = {Brasilia},
  isbn      = {85-230-0405-x},
  pages     = {958 -- 966},
  year      = {1993},
  language  = {en}
}
@article{Mayer1995,
  author    = {Mayer, Claudia},
  title     = {Between Resistance and Affirmation: Christa Wolf and German Unification},
  series = {Canadian review of comparative literature : CRCL = Revue canadienne de litt{\´e}rature compar{\´e}e / Canadian Comparative Literature Association. 22 (1995), H. 3-4},
  journal   = {Canadian review of comparative literature : CRCL = Revue canadienne de litt{\´e}rature compar{\´e}e / Canadian Comparative Literature Association. 22 (1995), H. 3-4},
  isbn      = {0319-051X},
  pages     = {813 -- 835},
  year      = {1995},
  language  = {en}
}
@book{Mayer2001,
  author    = {Mayer, Claudia},
  title     = {Art : from prehistoric art to modernism / [Text: Claudia Mayer-Iswandy]},
  publisher = {DuMont},
  address   = {K{\"o}ln},
  isbn      = {3-7701-7048-2},
  pages     = {[19] S. : zahlr. Ill. + Beil. (19 S.)},
  year      = {2001},
  language  = {en}
}
@inproceedings{MayBreitbachAlexopoulosetal.2019,
  author    = {May, Martin and Breitbach, Gerd and Alexopoulos, Spiros and Latzke, Markus and B{\"a}umer, Klaus and Uhlig, Ralf and S{\"o}hn, Matthias and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Experimental facility for investigations of wire mesh absorbers for pressurized gases},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117547},
  pages     = {030035-1 -- 030035-9},
  year      = {2019},
  language  = {en}
}
@article{MautnerForsterKornhuberetal.2008,
  author    = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver},
  title     = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver},
  series = {Domain Decomposition Methods in Science and Engineering XVII},
  journal   = {Domain Decomposition Methods in Science and Engineering XVII},
  isbn      = {978-3-540-75198-4},
  pages     = {383 -- 390},
  year      = {2008},
  language  = {en}
}
@book{Mautner2006,
  author    = {Mautner, Karin},
  title     = {Numerical treatment of the Black-Scholes variational inequality in computational finance},
  address   = {Berlin},
  pages     = {XII, 140 S : graph. Darst.},
  year      = {2006},
  language  = {en}
}
@article{MausHoefkenSchuba2011,
  author    = {Maus, Stefan and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Forensic Analysis of Geodata in Android Smartphones},
  pages     = {1 -- 11},
  year      = {2011},
  language  = {en}
}
@article{MaurischatPerkins2020,
  author    = {Maurischat, Andreas and Perkins, Rudolph},
  title     = {Taylor coefficients of Anderson generating functions and Drinfeld torsion extensions},
  number    = {Vol. 18, No. 01},
  publisher = {World Scientific},
  address   = {Singapur},
  doi       = {10.1142/S1793042122500099},
  pages     = {113 -- 130},
  year      = {2020},
  abstract  = {We generalize our work on Carlitz prime power torsion extension to torsion extensions of Drinfeld modules of arbitrary rank. As in the Carlitz case, we give a description of these extensions in terms of evaluations of Anderson generating functions and their hyperderivatives at roots of unity. We also give a direct proof that the image of the Galois representation attached to the p-adic Tate module lies in the p-adic points of the motivic Galois group. This is a generalization of the corresponding result of Chang and Papanikolas for the t-adic case.},
  language  = {en}
}
@article{Maurischat2022,
  author    = {Maurischat, Andreas},
  title     = {Algebraic independence of the Carlitz period and its hyperderivatives},
  series = {Journal of Number Theory},
  volume    = {240},
  journal   = {Journal of Number Theory},
  publisher = {Elsevier},
  address   = {Orlando, Fla.},
  issn      = {0022-314X},
  doi       = {10.1016/j.jnt.2022.01.006},
  pages     = {145 -- 162},
  year      = {2022},
  language  = {en}
}
@article{Maurischat2021,
  author    = {Maurischat, Andreas},
  title     = {Algebraic independence of the Carlitz period and its hyperderivatives},
  pages     = {1 -- 12},
  year      = {2021},
  language  = {en}
}
@inproceedings{MaurerMiskiwAcostaetal.2023,
  author    = {Maurer, Florian and Miskiw, Kim K. and Acosta, Rebeca Ramirez and Harder, Nick and Sander, Volker and Lehnhoff, Sebastian},
  title     = {Market abstraction of energy markets and policies - application in an agent-based modeling toolbox},
  series = {EI.A 2023: Energy Informatics},
  booktitle = {EI.A 2023: Energy Informatics},
  editor    = {Jorgensen, Bo Norregaard and Pereira da Silva, Luiz Carlos and Ma, Zheng},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-48651-7 (Print)},
  doi       = {10.1007/978-3-031-48652-4_10},
  pages     = {139 -- 157},
  year      = {2023},
  abstract  = {In light of emerging challenges in energy systems, markets are prone to changing dynamics and market design. Simulation models are commonly used to understand the changing dynamics of future electricity markets. However, existing market models were often created with specific use cases in mind, which limits their flexibility and usability. This can impose challenges for using a single model to compare different market designs. This paper introduces a new method of defining market designs for energy market simulations. The proposed concept makes it easy to incorporate different market designs into electricity market models by using relevant parameters derived from analyzing existing simulation tools, morphological categorization and ontologies. These parameters are then used to derive a market abstraction and integrate it into an agent-based simulation framework, allowing for a unified analysis of diverse market designs. Furthermore, we showcase the usability of integrating new types of long-term contracts and over-the-counter trading. To validate this approach, two case studies are demonstrated: a pay-as-clear market and a pay-as-bid long-term market. These examples demonstrate the capabilities of the proposed framework.},
  language  = {en}
}
@inproceedings{Maurer2022,
  author    = {Maurer, Florian},
  title     = {Framework to provide a simulative comparison of different energy market designs},
  series = {Energy Informatics},
  volume    = {5},
  booktitle = {Energy Informatics},
  number    = {2, Article number: 12},
  publisher = {Springer Nature},
  issn      = {2520-8942},
  doi       = {10.1186/s42162-022-00215-6},
  pages     = {18 -- 20},
  year      = {2022},
  abstract  = {Useful market simulations are key to the evaluation of diferent market designs existing of multiple market mechanisms or rules. Yet a simulation framework which has a comparison of diferent market mechanisms in mind was not found. The need to create an objective view on different sets of market rules while investigating meaningful agent strategies concludes that such a simulation framework is needed to advance the research on this subject. An overview of diferent existing market simulation models is given which also shows the research gap and the missing capabilities of those systems. Finally, a methodology is outlined how a novel market simulation which can answer the research questions can be developed.},
  language  = {en}
}
@article{MatoniBerndt1980,
  author    = {Matoni, Georg and Berndt, Heinz},
  title     = {Thermal synthesis of the optical pure pentapeptide derivative Z-(L)-Ala-(L)-Phe-Gly-(L)-Phe-Gly-OMe},
  series = {Tetrahedron letters},
  volume    = {21},
  journal   = {Tetrahedron letters},
  number    = {1},
  issn      = {0040-4039},
  doi       = {10.1016/S0040-4039(00)93618-9},
  pages     = {37 -- 40},
  year      = {1980},
  language  = {en}
}
@article{MathiakWillneckerPlescher2005,
  author    = {Mathiak, Gerhard and Willnecker, Rainer and Plescher, Engelbert},
  title     = {Vibrational effects on diffusion experiments},
  series = {Microgravity science and technology : international journal for microgravity research and applications},
  volume    = {Vol. 15},
  journal   = {Microgravity science and technology : international journal for microgravity research and applications},
  number    = {No. 1},
  issn      = {0938-0108},
  pages     = {295 -- 300},
  year      = {2005},
  language  = {en}
}
@article{MathiakPlescherWillnecker2005,
  author    = {Mathiak, Gerhard and Plescher, Engelbert and Willnecker, Rainer},
  title     = {Liquid metal diffusion experiments in microgravity - Vibrational effects},
  series = {Measurement science and technology},
  volume    = {Vol. 16},
  journal   = {Measurement science and technology},
  number    = {No. 2},
  issn      = {0957-0233},
  doi       = {10.1088/0957-0233/16/2/003},
  pages     = {336},
  year      = {2005},
  language  = {en}
}
@inproceedings{MatchaQuasten2009,
  author    = {Matcha, Heike and Quasten, Gero},
  title     = {A Parametric-Typological Tool: More Diversity for Mass Produced Single Family Homes Through Parametrized Design and Customized Mass Production},
  series = {Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings},
  booktitle = {Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings},
  isbn      = {978-0-9541183-8-9},
  pages     = {409 -- 416},
  year      = {2009},
  language  = {en}
}
@article{MatchaLjubasGueldemet2018,
  author    = {Matcha, Heike and Ljubas, Ante and Gueldemet, Harun},
  title     = {Printing a Coffee Bar: An investigation into mid-scale 3D printing},
  series = {Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018},
  journal   = {Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018},
  editor    = {Kepczynska-Walczak, A.},
  pages     = {59 -- 68},
  year      = {2018},
  abstract  = {We present and discuss an exploration of the possibilities and properties of 3D printing with a printing space of 1 cubic meter, and how those can be integrated into architectural education through an experimental design and research course with students of architecture.We expand on issues presented at the eCAADe conference 2017 in Rome [Ref 6] by increasing the complexity and size of our prints, printing not a model to scale, but a full scale funtional prototype of a usable architectural object: A coffee bar.},
  language  = {en}
}
@inproceedings{MatchaLjubas2010,
  author    = {Matcha, Heike and Ljubas, Ante},
  title     = {Parametric Origami: Adaptable temporary buildings},
  series = {Future cities: 28th eCAADe Conference Proceedings. eCAADe: Conferences. Zurich, Switzerland},
  booktitle = {Future cities: 28th eCAADe Conference Proceedings. eCAADe: Conferences. Zurich, Switzerland},
  isbn      = {978-0-9541183-7-2},
  pages     = {243 -- 251},
  year      = {2010},
  language  = {en}
}
@inproceedings{MatchaKarzelQuasten2008,
  author    = {Matcha, Heike and Karzel, R{\"u}diger and Quasten, Gero},
  title     = {Architectural Design with Parametric Modeling \& Customized Mass Production: Explorations and Case Studies in Architectural Design and Production Methods},
  series = {Language and the Scientific Imagination. The 11th International Conference of ISSEI, Language Centre, University of Helsinki (Finland) 28 July - 2 August 2008},
  booktitle = {Language and the Scientific Imagination. The 11th International Conference of ISSEI, Language Centre, University of Helsinki (Finland) 28 July - 2 August 2008},
  pages     = {19 Seiten},
  year      = {2008},
  language  = {en}
}
@incollection{MatchaBarczik2011,
  author    = {Matcha, Heike and Barczik, G{\"u}nter},
  title     = {Mass Diversity: Individualized housing via parametric typology},
  series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  editor    = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg},
  publisher = {Edition Axel Menges},
  address   = {Fellbach},
  isbn      = {978-3-936681-47-5},
  pages     = {354 -- 358},
  year      = {2011},
  language  = {en}
}
@inproceedings{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Parametric possibilities: designing with parametric modelling},
  series = {Predicting the Future [25th eCAADe Conference Proceedings]},
  booktitle = {Predicting the Future [25th eCAADe Conference Proceedings]},
  isbn      = {978-0-9541183-6-5},
  pages     = {849 -- 856},
  year      = {2007},
  language  = {en}
}
@inproceedings{Matcha2016,
  author    = {Matcha, Heike},
  title     = {From Designing Buildings from Systems to Designing Systems for Buildings},
  series = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  booktitle = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  editor    = {Herneoja, Aulikki and {\"O}sterlund, Toni and Markkanen, Piia},
  publisher = {ECAADe},
  address   = {Oulu, Finland},
  doi       = {10.52842/conf.ecaade.2016.1.237},
  pages     = {237 -- 240},
  year      = {2016},
  abstract  = {We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.},
  language  = {en}
}
@article{Matcha2015,
  author    = {Matcha, Heike},
  title     = {Parametrized Systems: Conceiving of Buildings as Assemblies of Varied Parts},
  series = {Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015},
  journal   = {Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015},
  editor    = {Martens, B.},
  pages     = {143 -- 148},
  year      = {2015},
  language  = {en}
}
@inproceedings{MatareSchifferFerrein2019,
  author    = {Matar{\´e}, Victor and Schiffer, Stefan and Ferrein, Alexander},
  title     = {golog++ : An integrative system design},
  series = {CogRob 2018. Cognitive Robotics Workshop : Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018) Tempe, AZ, USA, October 27th, 2018},
  booktitle = {CogRob 2018. Cognitive Robotics Workshop : Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018) Tempe, AZ, USA, October 27th, 2018},
  editor    = {Steinbauer, Gerald and Ferrein, Alexander},
  issn      = {1613-0073},
  pages     = {29 -- 35},
  year      = {2019},
  language  = {en}
}
@article{MarxSchenkBehrensetal.2013,
  author    = {Marx, Ulrich and Schenk, Friedrich and Behrens, Jan and Meyr, Ulrike and Wanek, Paul and Zang, Werner and Schmitt, Robert and Br{\"u}stle, Oliver and Zenke, Martin and Klocke, Fritz},
  title     = {Automatic production of induced pluripotent stem cells},
  series = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  volume    = {Vol. 5},
  journal   = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  pages     = {2 -- 6},
  year      = {2013},
  language  = {en}
}
@article{MartinVaqueroKleefeld2020,
  author    = {Mart{\´i}n-Vaquero, J. and Kleefeld, Andreas},
  title     = {Solving nonlinear parabolic PDEs in several dimensions: Parallelized ESERK codes},
  series = {Journal of Computational Physics},
  journal   = {Journal of Computational Physics},
  number    = {423},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9991},
  doi       = {10.1016/j.jcp.2020.109771},
  year      = {2020},
  abstract  = {There is a very large number of very important situations which can be modeled with nonlinear parabolic partial differential equations (PDEs) in several dimensions. In general, these PDEs can be solved by discretizing in the spatial variables and transforming them into huge systems of ordinary differential equations (ODEs), which are very stiff. Therefore, standard explicit methods require a large number of iterations to solve stiff problems. But implicit schemes are computationally very expensive when solving huge systems of nonlinear ODEs. Several families of Extrapolated Stabilized Explicit Runge-Kutta schemes (ESERK) with different order of accuracy (3 to 6) are derived and analyzed in this work. They are explicit methods, with stability regions extended, along the negative real semi-axis, quadratically with respect to the number of stages s, hence they can be considered to solve stiff problems much faster than traditional explicit schemes. Additionally, they allow the adaptation of the step length easily with a very small cost. Two new families of ESERK schemes (ESERK3 and ESERK6) are derived, and analyzed, in this work. Each family has more than 50 new schemes, with up to 84.000 stages in the case of ESERK6. For the first time, we also parallelized all these new variable step length and variable number of stages algorithms (ESERK3, ESERK4, ESERK5, and ESERK6). These parallelized strategies allow to decrease times significantly, as it is discussed and also shown numerically in two problems. Thus, the new codes provide very good results compared to other well-known ODE solvers. Finally, a new strategy is proposed to increase the efficiency of these schemes, and it is discussed the idea of combining ESERK families in one code, because typically, stiff problems have different zones and according to them and the requested tolerance the optimum order of convergence is different.},
  language  = {en}
}
@article{MartinsBlaserFeliksetal.2011,
  author    = {Martins, Berta M. and Blaser, Martin and Feliks, Mikolaj and Ullmann, Matthias G. and Buckel, Wolfgang and Selmer, Thorsten},
  title     = {Structural basis for a Kolbe-type decarboxylation catalyzed by a glycyl radical enzyme},
  series = {Journal of the American Chemical Society},
  journal   = {Journal of the American Chemical Society},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  pages     = {1 -- 33},
  year      = {2011},
  language  = {en}
}
@article{MartinezJakobTuetal.2013,
  author    = {Martinez, Ronny and Jakob, Felix and Tu, Ran and Siegert, Petra and Maurer, Karl-Heinz and Schwaneberg, Ulrich},
  title     = {Increasing activity and thermal resistance of Bacillus gibsonii alkaline protease (BgAP) by directed evolution},
  series = {Biotechnology and bioengineering},
  volume    = {Vol. 110},
  journal   = {Biotechnology and bioengineering},
  number    = {Iss. 3},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1097-0290 (E-Journal); 0006-3592 (Print); 0368-1467 (Print)},
  pages     = {711 -- 720},
  year      = {2013},
  language  = {en}
}
@article{MartinGonzalezKotliarRiosMartinezetal.2014,
  author    = {Martin-Gonzalez, Anabel and Kotliar, Konstantin and Rios-Martinez, Jorge and Lanzl, Ines and Navab, Nassir},
  title     = {Mediated-reality magnification for macular degeneration rehabilitation},
  series = {Journal of Modern Optics},
  volume    = {61},
  journal   = {Journal of Modern Optics},
  number    = {17},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1362-3044},
  doi       = {10.1080/09500340.2014.936110},
  pages     = {1400 -- 1408},
  year      = {2014},
  language  = {en}
}
@article{MartinHardtMeissburgeretal.1983,
  author    = {Martin, Siegfried A. and Hardt, Arno and Meissburger, J{\"u}rgen and Berg, Georg P. A. and Hacker, Ulrich and H{\"u}rlimann, Werner and R{\"o}mer, Josef G. M. and Sagefka, Thomas and Retz, Adolf and Schult, Otto W. B.},
  title     = {The QQDDQ magnet spectrometer "BIG KARL"},
  series = {Nuclear instruments and methods in physics research. Vol. 214, iss. 2-3},
  journal   = {Nuclear instruments and methods in physics research. Vol. 214, iss. 2-3},
  issn      = {0029-554x (E-Journal); 1872-9606 (E-Journal); 0167-5087 (Print)},
  pages     = {281 -- 303},
  year      = {1983},
  language  = {en}
}
@inproceedings{MartinBergHardtetal.1979,
  author    = {Martin, S. and Berg, G. and Hardt, Arno and H{\"u}rlimann, W. and K{\"o}hler, M. and Meißberger, J. and Sagefka, T. and Schult, O. W. B.},
  title     = {First experience with the magnet spectrometer 'BIG KARL'},
  series = {Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979},
  booktitle = {Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979},
  editor    = {Sanderson, N. E.},
  publisher = {Daresbury Lab.},
  address   = {Daresbury},
  pages     = {38 -- 42},
  year      = {1979},
  language  = {en}
}
@article{MartinBergHackeretal.1985,
  author    = {Martin, S. A. and Berg, G. P. A. and Hacker, U. and Hardt, Arno and K{\"o}hler, M. and Meißburger, J. and Osterfeld, F. and Prasuhn, D. and Riepe, G. and Rogge, M. and Schult, O. W. B. and Speth, J. and Turek, P. and Gaul, G. and Hagedoorn, H. and Heide, J. A. van der and Hinterberger, F. and Huber, M. and Jahn, R. and Mayer-Kuckuk, T. and Poth, H. and Paetz gen. Schieck, H.},
  title     = {COSY - a cooler synchrotron and storage ring},
  series = {IEEE transactions on nuclear science. Vol. 32, iss. 5},
  journal   = {IEEE transactions on nuclear science. Vol. 32, iss. 5},
  issn      = {1558-1578 (E-Journal); 0018-9499 (Print)},
  pages     = {2694 -- 2696},
  year      = {1985},
  language  = {en}
}
@misc{MartinFrauenrathZerdemetal.2011,
  author    = {Martin, Conrad Steven and Frauenrath, Tobias and Zerdem, Celal and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {Evaluation of Magneto Alert Sensor (MALSE) to Improve MR Safety by Decreasing the Incidence of Ferromagnetic Projectile Accidents},
  series = {2011 ISMRM Annual Meeting Proceedings},
  journal   = {2011 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2011},
  abstract  = {The magnetic forces of fringe magnetic fields of MR systems on ferromagnetic components can impose a severe patient, occupational health and safety hazard. MRI accidents are listed as number 9 of the top 10 risks in modern medicine. With the advent of ultrahigh field MR systems including passively shielded magnet versions, this risk, commonly known as the missile or projectile effect is even more pronounced. A strategy employing magnetic field sensors which can be attached to ferromagnetic objects that are commonly used in a clinical environment is conceptually appealing for the pursuit of reducing the risk of ferromagnetic projectile accidents.},
  language  = {en}
}
@article{MartinFrauenrathOezerdemetal.2011,
  author    = {Martin, Conrad and Frauenrath, Tobias and {\"O}zerdem, Celal and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {Development and evaluation of a small and mobile Magneto Alert Sensor (MALSE) to support safety requirements for magnetic resonance imaging},
  series = {European Radiology},
  volume    = {21},
  journal   = {European Radiology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-011-2153-z},
  pages     = {2187 -- 2192},
  year      = {2011},
  abstract  = {Objective The purpose of this study is to (i) design a small and mobile Magnetic field ALert SEnsor (MALSE), (ii) to carefully evaluate its sensors to their consistency of activation/deactivation and sensitivity to magnetic fields, and (iii) to demonstrate the applicability of MALSE in 1.5 T, 3.0 T and 7.0 T MR fringe field environments. Methods MALSE comprises a set of reed sensors, which activate in response to their exposure to a magnetic field. The activation/deactivation of reed sensors was examined by moving them in/out of the fringe field generated by 7TMR. Results The consistency with which individual reed sensors would activate at the same field strength was found to be 100\% for the setup used. All of the reed switches investigated required a substantial drop in ambient magnetic field strength before they deactivated. Conclusions MALSE is a simple concept for alerting MRI staff to a ferromagnetic object being brought into fringe magnetic fields which exceeds MALSEs activation magnetic field. MALSE can easily be attached to ferromagnetic objects within the vicinity of a scanner, thus creating a barrier for hazardous situations induced by ferromagnetic parts which should not enter the vicinity of an MR-system to occur.},
  language  = {en}
}
@inproceedings{MarkinkovicButenwegPaveseetal.2020,
  author    = {Markinkovic, Marko and Butenweg, Christoph and Pavese, A. and Lanese, I. and Hoffmeister, B. and Pinkawa, M. and Vulcu, C. and Bursi, O. and Nardin, C. and Paolacci, F. and Quinci, G. and Fragiadakis, M. and Weber, F. and Huber, P. and Renault, P. and G{\"u}ndel, M. and Dyke, S. and Ciucci, M. and Marino, A.},
  title     = {Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests},
  series = {Seismic design of industrial facilities 2020},
  booktitle = {Seismic design of industrial facilities 2020},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-729-0},
  pages     = {159 -- 172},
  year      = {2020},
  language  = {en}
}
@inproceedings{MarinkovićButenweg2019,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental and numerical analysis of RC frames with decoupled masonry infills},
  series = {7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  booktitle = {7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering},
  editor    = {Papadrakakis, Manolis and Fragiadakis, Michalis},
  publisher = {National Technical University of Athens},
  address   = {Athen},
  isbn      = {978-618-82844-5-6},
  issn      = {2623-3347},
  doi       = {10.7712/120119.7088.18845},
  pages     = {2464 -- 2479},
  year      = {2019},
  abstract  = {Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their poor behaviour is the connection to the frame, which is usually constructed using mortar. This paper describes the novel solution for infill/frame connection based on application of elastomeric material between them. The system called INODIS (Innovative Decoupled Infill System) has the aim to postpone the activation of infill in in-plane direction and at the same time to provide sufficient out-of-plane support. First, experimental tests on infilled frame specimens are presented and the comparison of the results between traditionally infilled frames and infilled frames with the INODIS system are given. The results are then used for calibration and validation of numerical model, which can be further employed for investigating the influence of some material parameters on the behaviour of infilled frames with the INODIS system.},
  language  = {en}
}
@inproceedings{MarinkovićButenweg2020,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Out-of-plane behavior of decoupled masonry infills under seismic loading},
  series = {Proceedings of the 17th World Conference on Earthquake Engineering},
  booktitle = {Proceedings of the 17th World Conference on Earthquake Engineering},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {Masonry is used in many buildings not only for load-bearing walls, but also for non-load-bearing enclosure elements in the form of infill walls. Many studies confirmed that infill walls interact with the surrounding reinforced concrete frame, thus changing dynamic characteristics of the structure. Consequently, masonry infills cannot be neglected in the design process. However, although the relevant standards contain requirements for infill walls, they do not describe how these requirements are to be met concretely. This leads in practice to the fact that the infill walls are neither dimensioned nor constructed correctly. The evidence of this fact is confirmed by the recent earthquakes, which have led to enormous damages, sometimes followed by the total collapse of buildings and loss of human lives. Recently, the increasing effort has been dedicated to the approach of decoupling of masonry infills from the frame elements by introducing the gap in between. This helps in removing the interaction between infills and frame, but raises the question of out-of-plane stability of the panel. This paper presents the results of the experimental campaign showing the out-of-plane behavior of masonry infills decoupled with the system called INODIS (Innovative decoupled infill system), developed within the European project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings). Full scale specimens were subjected to the different loading conditions and combinations of in-plane and out-of-plane loading. Out-of-plane capacity of the masonry infills with the INODIS system is compared with traditionally constructed infills, showing that INODIS system provides reliable out-of-plane connection under various loading conditions. In contrast, traditional infills performed very poor in the case of combined and simultaneously applied in-plane and out-of-plane loading, experiencing brittle behavior under small in-plane drifts followed by high out-of-plane displacements. Decoupled infills with the INODIS system have remained stable under out-of-plane loads, even after reaching high in-plane drifts and being damaged.},
  language  = {en}
}
@article{MarinkovićButenweg2022,
  author    = {Marinković, Marko and Butenweg, Christoph},
  title     = {Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading},
  series = {Construction and Building Materials},
  volume    = {318},
  journal   = {Construction and Building Materials},
  number    = {1},
  editor    = {Ford, Michael C.},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0526},
  doi       = {10.1016/j.conbuildmat.2021.126041},
  year      = {2022},
  abstract  = {Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries in the world, as well as in seismic active areas. However, many RC frame structures with masonry infills were seriously damaged during earthquake events, as the traditional infills are generally constructed with direct contact to the RC frame which brings undesirable infill/frame interaction. This interaction leads to the activation of the equivalent diagonal strut in the infill panel, due to the RC frame deformation, and combined with seismically induced loads perpendicular to the infill panel often causes total collapses of the masonry infills and heavy damages to the RC frames. This fact was the motivation for developing different approaches for improving the behaviour of masonry infills, where infill isolation (decoupling) from the frame has been more intensively studied in the last decade. In-plane isolation of the infill wall reduces infill activation, but causes the need for additional measures to restrain out-of-plane movements. This can be provided by installing steel anchors, as proposed by some researchers. Within the framework of European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in Reinforced Concrete Buildings) the system based on a use of elastomers for in-plane decoupling and steel anchors for out-of-plane restrain was tested. This constructive solution was tested and deeply investigated during the experimental campaign where traditional and decoupled masonry infilled RC frames with anchors were subjected to separate and combined in-plane ‬and out-of-plane loading. Based on a detailed evaluation and comparison of the test results, the performance and effectiveness of the developed system are illustrated.},
  language  = {en}
}
@article{MarinkovicButenweg2022,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames},
  series = {Engineering Structures},
  volume    = {272},
  journal   = {Engineering Structures},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2022.114959},
  pages     = {18 Seiten},
  year      = {2022},
  abstract  = {Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill walls prone to damage during earthquakes. Interstory deformations lead to an interaction between the infill and the RC frame, which affects the structural response. The result of this interaction is significant damage to the infill wall and sometimes to the surrounding structural system too. In most design codes, infill walls are considered as non-structural elements and neglected in the design process, because taking into account the infills and considering the interaction between frame and infill in software packages can be complicated and impractical. A good way to avoid negative aspects arising from this behavior is to ensure no or low-interaction of the frame and infill wall, for instance by decoupling the infill from the frame. This paper presents the numerical study performed to investigate new connection system called INODIS (Innovative Decoupled Infill System) for decoupling infill walls from surrounding frame with the aim to postpone infill activation to high interstory drifts thus reducing infill/frame interaction and minimizing damage to both infills and frames. The experimental results are first used for calibration and validation of the numerical model, which is then employed for investigating the influence of the material parameters as well as infill's and frame's geometry on the in-plane behaviour of the infilled frames with the INODIS system. For all the investigated situations, simulation results show significant improvements in behaviour for decoupled infilled RC frames in comparison to the traditionally infilled frames.},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2018,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative System for Earthquake Resistant Masonry Infill Walls},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays},
  series = {Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference},
  booktitle = {Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference},
  publisher = {CRC Press},
  address   = {London},
  doi       = {10.1201/9781003098508-72},
  pages     = {1 -- 7},
  year      = {2020},
  abstract  = {Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the surrounding RC frame performed rather poor in past earthquakes. Masonry infills showed severe in-plane damages and failed in many cases under out-of-plane seismic loading. As the undesired interactions between frames and infills changes the load transfer on building level, complete collapses of buildings were observed. A possible solution is uncoupling of masonry infills to the frame to reduce the infill contribution activated by the frame deformation under horizontal loading. The paper presents numerical simulations on RC frames equipped with the innovative decoupling system INODIS. The system was developed within the European project INSYSME and allows an effective uncoupling of frame and infill. The simulations are carried out with a micro-modelling approach, which is able to predict the complex nonlinear behaviour resulting from the different materials and their interaction. Each brick is modelled individually and connected taking into account nonlinearity of a brick mortar interface. The calibration of the model is based on small specimen tests and experimental results for one bay one storey frame are used for the validation. The validated model is further used for parametric studies on two storey and two bay infilled frames. The response and change of the structural stiffness are analysed and compared to the traditionally infilled frame. The results confirm the effectiveness of the INODIS system with less damage and relatively low contribution of the infill at high drift levels. In contrast to the uncoupled system configurations, traditionally infilled frames experienced brittle failure at rather low drift levels.},
  language  = {en}
}
@article{MarinkovicButenweg2019,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames},
  series = {Engineering Structures},
  volume    = {197},
  journal   = {Engineering Structures},
  number    = {Article 109435},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0141-0296},
  doi       = {10.1016/j.engstruct.2019.109435},
  year      = {2019},
  language  = {en}
}
@inproceedings{MarcusMelissSpaete1993,
  author    = {Marcus, W. and Meliß, Michael and Sp{\"a}te, F.},
  title     = {Street lighting and advertising with photovoltaics},
  series = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  booktitle = {Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 3: Photovoltaics},
  publisher = {Hungarian Energy Society},
  address   = {Budapest},
  pages     = {509 -- 514},
  year      = {1993},
  language  = {en}
}
@inproceedings{MarcoFerrein2017,
  author    = {Marco, Heather G. and Ferrein, Alexander},
  title     = {AGNES: The African-German Network of Excellence in Science},
  series = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  booktitle = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {en}
}
@incollection{MansurovJandosovChenchiketal.2020,
  author    = {Mansurov, Zulkhair A. and Jandosov, Jakpar and Chenchik, D. and Azat, Seitkhan and Savitskaya, Irina S. and Kistaubaeva, Aida and Akimbekov, Nuraly S. and Digel, Ilya and Zhubanova, Azhar Achmet},
  title     = {Biocomposite Materials Based on Carbonized Rice Husk in Biomedicine and Environmental Applications},
  series = {Carbon Nanomaterials in Biomedicine and the Environment},
  booktitle = {Carbon Nanomaterials in Biomedicine and the Environment},
  publisher = {Jenny Stanford Publishing Pte. Ltd.},
  address   = {Singapore},
  isbn      = {978-981-4800-27-3},
  doi       = {10.1201/9780429428647-2},
  pages     = {3 -- 32},
  year      = {2020},
  abstract  = {This chapter describes the prospects for biomedical and environmental engineering applications of heterogeneous materials based on nanostructured carbonized rice husk. Efforts in engineering enzymology are focused on the following directions: development and optimization of immobilization methods leading to novel biotechnological and biomedical applications; construction of biocomposite materials based on individual enzymes, multi-enzyme complexes and whole cells, targeted on realization of specific industrial processes. Molecular biological and biochemical studies on cell adhesion focus predominantly on identification, isolation and structural analysis of attachment-responsible biological molecules and their genetic determinants. The chapter provides a short overview of applications of the biocomposite materials based of nanostructured carbonized adsorbents. It emphasizes that further studies and better understanding of the interactions between CNS and microbial cells are necessary. The future use of living cells as biocatalysts, especially in the environmental field, needs more systematic investigations of the microbial adsorption phenomenon.},
  language  = {en}
}
@article{MansurovJandosovKerimkulovaetal.2014,
  author    = {Mansurov, Zulkhair A. and Jandosov, J. M. and Kerimkulova, A. R. and Azat, S. and Zhubanova, Azhar Achmet and Digel, Ilya and Savistkaya, I. S. and Akimbekov, Nuraly S. and Kistaubaeva, A. S.},
  title     = {Nanostructured carbon materials for biomedical use},
  series = {Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences},
  volume    = {15 (2013)},
  journal   = {Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences},
  number    = {3},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {1562-3920},
  doi       = {10.18321/ectj224},
  pages     = {209 -- 217},
  year      = {2014},
  abstract  = {One of the priority trends of carbon nanotechnology is creation of nanocomposite systems. Such carbon nanostructured composites were produced using - raw materials based on the products of agricultural waste, such as grape stones, apricot stones, rice husk. These products have a - wide spectrum of application and can be obtained in large quantities. The Institute of Combustion Problems has carried out the work on synthesis of the nanostructured carbon sorbents for multiple applications including the field of biomedicine. The article presents the data on the synthesis and physico-chemical properties of carbonaceous sorbents using physicochemical methods of investigation: separation and purification of biomolecules; isolation of phytohormone - fusicoccin; adsorbent INGO-1 in the form of an adsorption column for blood detoxification, oral (entero) sorbent - INGO-2; the study of efferent and probiotic properties and sorption activity in regard to the lipopolysaccharide (LPS), new biocomposites - based on carbonized rice husk (CRH) and cellular microorganisms; the use of CRH in wound treatment. A new material for blood detoxication (INGO-1) has been obtained. Adsorption of p-cresyl sulfate and indoxyl sulfate has shown that active carbon adsorbent can remove clinically significant level of p-cresyl sulfate and indoxyl sulfate from human plasma. Enterosorbent INGO-2 possesses high adsorption activity in relation to Gram-negative bacteria and their endotoxins. INGO-2 slows down the growth of conditionally pathogenic microorganisms, without having a negative effect on bifido and lactobacteria. The use of enterosorbent INGO-2 for sorption therapy may provide a solution to a complex problem - detoxication of the digestive tract and normalization of the intestinal micro ecology. The immobilized probiotic called "Riso-lact" was registered at the Ministry of Health of the Republic of Kazakhstan as a biologically active food additive. The developed technology is patented and provides production of the medicine in the form of freeze-dried biomass immobilized in vials.},
  language  = {en}
}
@article{MansurovDigelBiisenbaevetal.2012,
  author    = {Mansurov, Z. and Digel, Ilya and Biisenbaev, M. and Savistkaya, I. and Kistaubaeva, A. and Akimbekov, Nuraly S. and Zhubanova, A.},
  title     = {Bio-composite material on the basis of carbonized rice husk in biomedicine and environmental applications},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {14},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  issn      = {2522-4867},
  doi       = {10.18321/ectj105},
  pages     = {115 -- 131},
  year      = {2012},
  language  = {en}
}
@article{MangRoosenAnsorgeSchumacheretal.2007,
  author    = {Mang, Thomas and Roosen, Christoph and Ansorge-Schumacher, Marion and Leitner, Walter},
  title     = {Gaining pH-control in water/carbon dioxide biphasic systems / Roosen, Christoph ; Ansorge-Schumacher, Marion ; Mang, Thomas ; Leitner, Walter ; Greiner, Lasse},
  series = {Green Chemistry. 9 (2007)},
  journal   = {Green Chemistry. 9 (2007)},
  isbn      = {1463-9262},
  pages     = {455 -- 458},
  year      = {2007},
  language  = {en}
}
@article{MangRoosenAnsorgeetal.2006,
  author    = {Mang, Thomas and Roosen, C. and Ansorge, Marion and Leitner, W.},
  title     = {Gaining pH-control in water/carbon dioxide biphasic systems / Abstract No. 1038 / Roosen, Ch. ; Ansorge, M. ; Mang, Thomas ; Leitner, W. ; Greiner, L.},
  series = {Green solvents for processes : Lake Constance, Friedrichshafen, Germany, 8 - 11 October 2006 ; book of abstracts / DECHEMA e.V.},
  journal   = {Green solvents for processes : Lake Constance, Friedrichshafen, Germany, 8 - 11 October 2006 ; book of abstracts / DECHEMA e.V.},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {145 S.},
  year      = {2006},
  language  = {en}
}
@article{MangKricheldorfJonte1984,
  author    = {Mang, Thomas and Kricheldorf, Hans R. and Jont{\´e}, J. Michael},
  title     = {Polylactones. 1. Copolymerizations of glycolide and \&beta-caprolactone / Kricheldorf, Hans R. ; Mang, Thomas ; Jont{\´e}, J. Michael},
  series = {Macromolecules. 17 (1984), H. 10},
  journal   = {Macromolecules. 17 (1984), H. 10},
  isbn      = {0024-9297},
  pages     = {2173 -- 2181},
  year      = {1984},
  language  = {en}
}
@article{MangKricheldorfJonte1985,
  author    = {Mang, Thomas and Kricheldorf, Hans R. and Jont{\´e}, J. Michael},
  title     = {Polylactones, 2. Copolymerization of glycolide with \&\#946;-propiolactone, \&\#967;-butyrolactone or \&\#948;-valerolactone / Kricheldorf, Hans R. ; Mang, Thomas ; Jont{\´e}, J. Michael},
  series = {Die makromolekulare Chemie. 186 (1985), H. 5},
  journal   = {Die makromolekulare Chemie. 186 (1985), H. 5},
  isbn      = {1022-1352},
  pages     = {955 -- 976},
  year      = {1985},
  language  = {en}
}
@article{MangKricheldorfAu1985,
  author    = {Mang, Thomas and Kricheldorf, Hans R. and Au, M.},
  title     = {Models of molecular evolution. 2. Stereospecificity of dipeptide syntheses by means of cyanamides and carbodiimides / Kricheldorf, Hans R. ; Au, M. ; Mang, Thomas},
  series = {International journal of peptide and protein research. 26 (1985), H. 2},
  journal   = {International journal of peptide and protein research. 26 (1985), H. 2},
  isbn      = {0300-9769},
  pages     = {149 -- 157},
  year      = {1985},
  language  = {en}
}
@article{MangKricheldorf1983,
  author    = {Mang, Thomas and Kricheldorf, Hans R.},
  title     = {Stereospecificity of peptide synthesis by means of phosphorus derivatives: a model of peptide synthesis in molecular evolution / Kricheldorf, Hans R. ; Mang, Thomas},
  series = {International Journal of Biological Macromolecules. 5 (1983), H. 5},
  journal   = {International Journal of Biological Macromolecules. 5 (1983), H. 5},
  isbn      = {0141-8130},
  pages     = {258 -- 266},
  year      = {1983},
  language  = {en}
}
@article{MangKricheldorf1981,
  author    = {Mang, Thomas and Kricheldorf, Hans R.},
  title     = {13-C-NMR Sequence Analysis 20. Stereospecificity of the polymerization of D,L-Leu-NCA and D,L-Val-NCA / Kricheldorf, Hans R. ; Mang, Thomas},
  series = {Die makromolekulare Chemie. 182 (1981), H. 11},
  journal   = {Die makromolekulare Chemie. 182 (1981), H. 11},
  isbn      = {1022-1352},
  pages     = {3077 -- 3098},
  year      = {1981},
  language  = {en}
}
@article{MangKricheldorf1982,
  author    = {Mang, Thomas and Kricheldorf, Hans R.},
  title     = {13-C-NMR sequence analysis. 21. Stereoselectivity of oligopeptide syntheses / Kricheldorf, Hans R. ; Mang, Thomas},
  series = {Die makromolekulare Chemie. 183 (1982), H. 9},
  journal   = {Die makromolekulare Chemie. 183 (1982), H. 9},
  isbn      = {1022-1352},
  pages     = {2093 -- 2111},
  year      = {1982},
  language  = {en}
}
@article{MangKricheldorf1982,
  author    = {Mang, Thomas and Kricheldorf, Hans R.},
  title     = {13-C-NMR sequence analysis. 22. Stereoselectivity of the polymerization of D,L-leucine and D,L-valine N-thiocarboxy anhydrides / Kricheldorf, Hans R. ; Mang, Thomas},
  series = {Die makromolekulare Chemie. 183 (1982), H. 9},
  journal   = {Die makromolekulare Chemie. 183 (1982), H. 9},
  isbn      = {1022-1352},
  pages     = {2113 -- 2129},
  year      = {1982},
  language  = {en}
}
@article{MangKolzMartinsetal.2007,
  author    = {Mang, Thomas and Kolz, J. and Martins, J. and Kremer, K.},
  title     = {Investigation of the Elastomer-Foam Production with Single-Sided NMR / Kolz, J. ; Martins, J. ; Kremer, K. ; Mang, Thomas ; Bl{\"u}mich, B.},
  series = {Kautschuk Gummi Kunststoffe. 60 (2007), H. 4},
  journal   = {Kautschuk Gummi Kunststoffe. 60 (2007), H. 4},
  isbn      = {0948-3276},
  pages     = {179 -- 183},
  year      = {2007},
  language  = {en}
}
@article{MangKolzMartinsetal.2006,
  author    = {Mang, Thomas and Kolz, J. and Martins, J. and Kremer, K.},
  title     = {Investigation of Elastomer Foams by Single-Sided NMR / Kolz, J. ; Martins, J. ; Kremer, K. ; Bl{\"u}mich, B. ; Mang, Thomas},
  series = {Kurzfassungen : 3. bis 6. Juli 2006, N{\"u}rnberg = Summaries / Deutsche Kautschuk Tagung, 3.7.-6.7.2006},
  journal   = {Kurzfassungen : 3. bis 6. Juli 2006, N{\"u}rnberg = Summaries / Deutsche Kautschuk Tagung, 3.7.-6.7.2006},
  publisher = {DKG, Dt. Kautschuk-Ges.},
  address   = {Frankfurt, Main},
  pages     = {33},
  year      = {2006},
  language  = {en}
}
@article{MangKolzHungeretal.2007,
  author    = {Mang, Thomas and Kolz, J. and Hunger, K. and Rath, S.},
  title     = {Investigation of self-diffusion processes in ionic hydrogels with a single-sided sensor / Kolz, J. ; Hunger, K. ; Rath, S. ; Mang, T. ; Bl{\"u}mich, B.},
  series = {Magnetic Resonance Imaging. 25 (2007), H. 4},
  journal   = {Magnetic Resonance Imaging. 25 (2007), H. 4},
  isbn      = {0730-725X},
  pages     = {566 -- 567},
  year      = {2007},
  language  = {en}
}
@article{MangKolzGogaetal.2007,
  author    = {Mang, Thomas and Kolz, J. and Goga, N. and Casanova, F.},
  title     = {Spatial localization with single-sided NMR sensors / Kolz, J. ; Goga, N. ; Casanova, F. ; Mang, T. ; Bl{\"u}mich, B.},
  series = {Applied Magnetic Resonance. 32 (2007), H. 1-2},
  journal   = {Applied Magnetic Resonance. 32 (2007), H. 1-2},
  isbn      = {0937-9347},
  pages     = {171 -- 184},
  year      = {2007},
  language  = {en}
}
@article{MangHodeniusSchmitzRodeetal.2009,
  author    = {Mang, Thomas and Hodenius, M. A. J. and Schmitz-Rode, T. and Baumann, M.},
  title     = {Absorption of 10-hydroxycamptothecin into the coat of magnetoliposomes / Hodenius, M. A. J. ; Schmitz-Rode, T. ; Baumann, M. ; Ivoanova, G. ; Wong, J. E. ; Mang, T. ; Haulena, F. ; Soenen, S. J. H. ; De Cuyper, M.},
  series = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3},
  journal   = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0927-7757},
  pages     = {20 -- 23},
  year      = {2009},
  language  = {en}
}
@article{MangHaulena1992,
  author    = {Mang, Thomas and Haulena, Friedhelm},
  title     = {Monodisperse latex particles with functional groups},
  series = {Modification of polymers : 4th Dresden Polymer Discussion ; September 22 to 25, 1992 at Gaussig / Dresden University of Technology, Department of Macromolecular Chemistry and Textile Chemistry; Institute of Polymer Technology Dresden. [Organizers: Claudia Kummerl{\"o}we ...]},
  journal   = {Modification of polymers : 4th Dresden Polymer Discussion ; September 22 to 25, 1992 at Gaussig / Dresden University of Technology, Department of Macromolecular Chemistry and Textile Chemistry; Institute of Polymer Technology Dresden. [Organizers: Claudia Kummerl{\"o}we ...]},
  publisher = {Univ.},
  address   = {Dresden},
  pages     = {68 -- 88},
  year      = {1992},
  language  = {en}
}
@article{MangHaulena1998,
  author    = {Mang, Thomas and Haulena, Friedhelm},
  title     = {Recycling of Polymeric Composites},
  series = {Invited and contributing lectures presented at the 38th Microsymposium on Recycling of Polymers : held in Prague, Czech Republic, July 14 - 17, 1997 / International Union of Pure and Applied Chemistry, Macromolecular Division. Symposium ed. J. Kahovec.},
  journal   = {Invited and contributing lectures presented at the 38th Microsymposium on Recycling of Polymers : held in Prague, Czech Republic, July 14 - 17, 1997 / International Union of Pure and Applied Chemistry, Macromolecular Division. Symposium ed. J. Kahovec.},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  pages     = {147 -- 156},
  year      = {1998},
  language  = {en}
}
@article{Mang2004,
  author    = {Mang, Thomas},
  title     = {Thermosensitive Magnetic Nanoparticles for Bioanalytical and Therapeutical Applications},
  series = {Biomedizinische Technik = Biomedical Engineering. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik = Biomedical Engineering. 49 (2004), H. 2},
  isbn      = {0013-5585},
  pages     = {1006 -- 1007},
  year      = {2004},
  language  = {en}
}
@article{Mang2004,
  author    = {Mang, Thomas},
  title     = {Polymer Magnetic Particles for Isolating Biomolecules, Especially Nucleic Acids},
  series = {Biomedizinische Technik = Biomedical Engineering. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik = Biomedical Engineering. 49 (2004), H. 2},
  isbn      = {0013-5585},
  pages     = {1008 -- 1009},
  year      = {2004},
  language  = {en}
}
@article{ManeaLeursOrbanetal.2011,
  author    = {Manea, Marilena and Leurs, Ulrike and Orban, Erika and Baranyai, Zsuzsa and {\"O}hlschl{\"a}ger, Peter and Marquardt, Andreas and Schulcz, Akos and Tejeda, Miguel},
  title     = {Enhanced Enzymatic Stability and Antitumor Activity of Daunorubicin-GnRH-III Bioconjugates Modified in Position 4},
  series = {Bioconjugate Chemistry},
  volume    = {22},
  journal   = {Bioconjugate Chemistry},
  number    = {7},
  publisher = {ACS},
  address   = {Washington, DC},
  isbn      = {1520-4812},
  pages     = {1320 -- 1329},
  year      = {2011},
  language  = {en}
}
@inproceedings{MandekarJentschLutzetal.2021,
  author    = {Mandekar, Swati and Jentsch, Lina and Lutz, Kai and Behbahani, Mehdi and Melnykowycz, Mark},
  title     = {Earable design analysis for sleep EEG measurements},
  series = {UbiComp '21},
  booktitle = {UbiComp '21},
  doi       = {10.1145/3460418.3479328},
  pages     = {171 -- 175},
  year      = {2021},
  abstract  = {Conventional EEG devices cannot be used in everyday life and hence, past decade research has been focused on Ear-EEG for mobile, at-home monitoring for various applications ranging from emotion detection to sleep monitoring. As the area available for electrode contact in the ear is limited, the electrode size and location play a vital role for an Ear-EEG system. In this investigation, we present a quantitative study of ear-electrodes with two electrode sizes at different locations in a wet and dry configuration. Electrode impedance scales inversely with size and ranges from 450 kΩ to 1.29 MΩ for dry and from 22 kΩ to 42 kΩ for wet contact at 10 Hz. For any size, the location in the ear canal with the lowest impedance is ELE (Left Ear Superior), presumably due to increased contact pressure caused by the outer-ear anatomy. The results can be used to optimize signal pickup and SNR for specific applications. We demonstrate this by recording sleep spindles during sleep onset with high quality (5.27 μVrms).},
  language  = {en}
}
@article{MandekarHollandThielenetal.2022,
  author    = {Mandekar, Swati and Holland, Abigail and Thielen, Moritz and Behbahani, Mehdi and Melnykowycz, Mark},
  title     = {Advancing towards Ubiquitous EEG, Correlation of In-Ear EEG with Forehead EEG},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22041568},
  pages     = {1 -- 19},
  year      = {2022},
  abstract  = {Wearable EEG has gained popularity in recent years driven by promising uses outside of clinics and research. The ubiquitous application of continuous EEG requires unobtrusive form-factors that are easily acceptable by the end-users. In this progression, wearable EEG systems have been moving from full scalp to forehead and recently to the ear. The aim of this study is to demonstrate that emerging ear-EEG provides similar impedance and signal properties as established forehead EEG. EEG data using eyes-open and closed alpha paradigm were acquired from ten healthy subjects using generic earpieces fitted with three custom-made electrodes and a forehead electrode (at Fpx) after impedance analysis. Inter-subject variability in in-ear electrode impedance ranged from 20 kΩ to 25 kΩ at 10 Hz. Signal quality was comparable with an SNR of 6 for in-ear and 8 for forehead electrodes. Alpha attenuation was significant during the eyes-open condition in all in-ear electrodes, and it followed the structure of power spectral density plots of forehead electrodes, with the Pearson correlation coefficient of 0.92 between in-ear locations ELE (Left Ear Superior) and ERE (Right Ear Superior) and forehead locations, Fp1 and Fp2, respectively. The results indicate that in-ear EEG is an unobtrusive alternative in terms of impedance, signal properties and information content to established forehead EEG.},
  language  = {en}
}
@article{MalzahnWindmillerValdesRamirezetal.2011,
  author    = {Malzahn, Kerstin and Windmiller, Joshua Ray and Vald{\´e}s-Ram{\´i}rez, Gabriela and Wang, Joseph and Sch{\"o}ning, Michael Josef},
  title     = {Wearable electrochemical sensors for in situ analysis in marine environments},
  series = {Analyst. 136 (2011), H. 14},
  journal   = {Analyst. 136 (2011), H. 14},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  isbn      = {0003-2654},
  pages     = {2912 -- 2917},
  year      = {2011},
  language  = {en}
}
@article{MalinowskiFournierHorbachetal.2022,
  author    = {Malinowski, Daniel and Fournier, Yvan and Horbach, Andreas and Frick, Michael and Magliani, Mirko and Kalverkamp, Sebastian and Hildinger, Martin and Spillner, Jan and Behbahani, Mehdi and Hima, Flutura},
  title     = {Computational fluid dynamics analysis of endoluminal aortic perfusion},
  series = {Perfusion},
  volume    = {0},
  journal   = {Perfusion},
  number    = {0},
  publisher = {Sage},
  address   = {London},
  issn      = {1477-111X},
  doi       = {10.1177/02676591221099809},
  pages     = {1 -- 8},
  year      = {2022},
  abstract  = {Introduction: In peripheral percutaneous (VA) extracorporeal membrane oxygenation (ECMO) procedures the femoral arteries perfusion route has inherent disadvantages regarding poor upper body perfusion due to watershed. With the advent of new long flexible cannulas an advancement of the tip up to the ascending aorta has become feasible. To investigate the impact of such long endoluminal cannulas on upper body perfusion, a Computational Fluid Dynamics (CFD) study was performed considering different support levels and three cannula positions. Methods: An idealized literature-based- and a real patient proximal aortic geometry including an endoluminal cannula were constructed. The blood flow was considered continuous. Oxygen saturation was set to 80\% for the blood coming from the heart and to 100\% for the blood leaving the cannula. 50\% and 90\% venoarterial support levels from the total blood flow rate of 6 l/min were investigated for three different positions of the cannula in the aortic arch. Results: For both geometries, the placement of the cannula in the ascending aorta led to a superior oxygenation of all aortic blood vessels except for the left coronary artery. Cannula placements at the aortic arch and descending aorta could support supra-aortic arteries, but not the coronary arteries. All positions were able to support all branches with saturated blood at 90\% flow volume. Conclusions: In accordance with clinical observations CFD analysis reveals, that retrograde advancement of a long endoluminal cannula can considerably improve the oxygenation of the upper body and lead to oxygen saturation distributions similar to those of a central cannulation.},
  language  = {en}
}
@article{MalanHamerKaeneletal.2020,
  author    = {Malan, Leone and Hamer, Mark and K{\"a}nel, Roland von and Kotliar, Konstantin and Wyk, Roelof D. van and Lambert, Gavin W. and Vilser, Walthard and Ziemssen, Tjalf and Schlaich, Markus P. and Smith, Wayne and Magnusson, Martin and Wentzel, Annemarie and Myburgh, Carlien E. and Steyn, Hendrik S. and Malan, Nico T.},
  title     = {Delayed retinal vein recovery responses indicate both non-adaptation to stress as well as increased risk for stroke: the SABPA study},
  series = {Cardiovascular Journal of Africa},
  volume    = {26},
  journal   = {Cardiovascular Journal of Africa},
  number    = {31},
  publisher = {Clinics Cardive Publishing},
  address   = {Durbanville},
  issn      = {1680-0745},
  doi       = {10.5830/CVJA-2020-031},
  pages     = {1 -- 12},
  year      = {2020},
  language  = {en}
}
@article{MakovickaGaertnerHardtetal.1997,
  author    = {Makovicka, C. and G{\"a}rtner, G. and Hardt, Arno and Hermann, W. and Wiechert, D. U.},
  title     = {Impregnated cathode surface investigations by SFM/STM and SEM/EDX},
  series = {Applied surface science. Vol. 111},
  journal   = {Applied surface science. Vol. 111},
  issn      = {1873-5584 (E-Journal); 0169-4332 (Print)},
  pages     = {70 -- 75},
  year      = {1997},
  language  = {en}
}
@article{MaiwaldDachwald2010,
  author    = {Maiwald, Volker and Dachwald, Bernd},
  title     = {Mission Design for a Multiple-Rendezvous Mission to Jupiter's Trojans},
  pages     = {3},
  year      = {2010},
  language  = {en}
}
@article{MahmoudiFleischhakerSahraietal.2008,
  author    = {Mahmoudi, Mohammad and Fleischhaker, Robert and Sahrai, Mostafa and Evers, J{\"o}rg},
  title     = {Group velocity control in the ultraviolet domain via interacting dark-state resonances},
  series = {Journal of physics B: Atomic, molecular and optical physics},
  volume    = {41},
  journal   = {Journal of physics B: Atomic, molecular and optical physics},
  number    = {2},
  issn      = {0953-4075},
  doi       = {10.1088/0953-4075/41/2/025504},
  pages     = {25504 -- 25600},
  year      = {2008},
  language  = {en}
}
@inproceedings{MahdiRendonSchwageretal.2019,
  author    = {Mahdi, Zahra and Rend{\´o}n, Carlos and Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Novel concept for indirect solar-heated methane reforming},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {0094-243X},
  doi       = {10.1063/1.5117694},
  pages     = {180014-1 -- 180014-7},
  year      = {2019},
  language  = {en}
}
@inproceedings{MahdiDerschSchmitzetal.2022,
  author    = {Mahdi, Zahra and Dersch, J{\"u}rgen and Schmitz, Pascal and Dieckmann, Simon and Chico Caminos, Ricardo Alexander and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Schwager, Christian and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and B{\"u}scher, Rauno},
  title     = {Technical assessment of Brayton cycle heat pumps for the integration in hybrid PV-CSP power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086269},
  pages     = {11 Seiten},
  year      = {2022},
  abstract  = {The hybridization of Concentrated Solar Power (CSP) and Photovoltaics (PV) systems is a promising approach to reduce costs of solar power plants, while increasing dispatchability and flexibility of power generation. High temperature heat pumps (HT HP) can be utilized to boost the salt temperature in the thermal energy storage (TES) of a Parabolic Trough Collector (PTC) system from 385 °C up to 565 °C. A PV field can supply the power for the HT HP, thus effectively storing the PV power as thermal energy. Besides cost-efficiently storing energy from the PV field, the power block efficiency of the overall system is improved due to the higher steam parameters. This paper presents a technical assessment of Brayton cycle heat pumps to be integrated in hybrid PV-CSP power plants. As a first step, a theoretical analysis was carried out to find the most suitable working fluid. The analysis included the fluids Air, Argon (Ar), Nitrogen (N2) and Carbon dioxide (CO2). N2 has been chosen as the optimal working fluid for the system. After the selection of the ideal working medium, different concepts for the arrangement of a HT HP in a PV-CSP hybrid power plant were developed and simulated in EBSILON®Professional. The concepts were evaluated technically by comparing the number of components required, pressure losses and coefficient of performance (COP).},
  language  = {en}
}
@inproceedings{MagnorSoltauBragardetal.2010,
  author    = {Magnor, D. and Soltau, N. and Bragard, Michael and Schmiegel, A. and De Doncker, R. W. and Sauer, D. U.},
  title     = {Analysis of the model dynamics for the battery and battery converter in a grid-connected 5 kW photovoltaic system},
  series = {Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention \& Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference},
  booktitle = {Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention \& Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference},
  editor    = {de Santi, Giovanni Frederigo},
  publisher = {WIP Renewable Energies},
  address   = {[M{\"u}nchen]},
  isbn      = {3-936338-26-4 (DVD-ROM)},
  year      = {2010},
  language  = {en}
}
@article{MaggakisKelemenDigelArtmann2005,
  author    = {Maggakis-Kelemen, Christina and Digel, Ilya and Artmann, Gerhard},
  title     = {Polystyrene sulfonate/Polyallylamine hydrochloride microcapsules as potential artificial red blood cells - improvement of capsule flexibility},
  series = {Biomedizinische Technik. 50 (2005), H. Erg.-Bd. 1},
  journal   = {Biomedizinische Technik. 50 (2005), H. Erg.-Bd. 1},
  pages     = {324 -- 326},
  year      = {2005},
  language  = {en}
}
@article{MaggakisKelemenBiselliArtmann2002,
  author    = {Maggakis-Kelemen, Christina and Biselli, Manfred and Artmann, Gerhard},
  title     = {Determination of the elastic shear modulus of cultured human red blood cells},
  series = {Biomedizinische Technik. 47 (2002), H. Suppl. 1 Pt. 1},
  journal   = {Biomedizinische Technik. 47 (2002), H. Suppl. 1 Pt. 1},
  isbn      = {0013-5585},
  pages     = {106 -- 109},
  year      = {2002},
  language  = {en}
}
@article{MaggakisKelemenBorkKayseretal.2003,
  author    = {Maggakis-Kelemen, C. and Bork, M. and Kayser, Peter and Biselli, Manfred and Artmann, Gerhard},
  title     = {Biological and mechanical quality of red blood cells cultured from human umbilical cord blood stem cells},
  series = {Medical and biological engineering and computing. 41 (2003), H. 3},
  journal   = {Medical and biological engineering and computing. 41 (2003), H. 3},
  isbn      = {0140-0118},
  pages     = {350 -- 356},
  year      = {2003},
  language  = {en}
}
@article{MaezawaFoerster2003,
  author    = {Maezawa, Koichi and F{\"o}rster, Arnold},
  title     = {Quantum transport devices based on resonant tunneling},
  series = {Nanoelectronics and information technology : advanced electronic materials and novel devices / Rainer Waser (ed.).},
  journal   = {Nanoelectronics and information technology : advanced electronic materials and novel devices / Rainer Waser (ed.).},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {3-527-40363-9},
  pages     = {407 -- 424},
  year      = {2003},
  language  = {en}
}
@book{Maercker1995,
  author    = {Maercker, Gisela},
  title     = {Efficient estimation in AR models with ARCH errors},
  publisher = {Institute f{\"u}r Mathematik, Techn. Univ.},
  address   = {Braunschweig},
  pages     = {20 Bl.},
  year      = {1995},
  language  = {en}
}
@book{Maercker1997,
  author    = {Maercker, Gisela},
  title     = {Statistical inference in conditional heteroskedastic autoregressive models},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-2486-1},
  pages     = {87 S.: graph. Darst.},
  year      = {1997},
  language  = {en}
}
@book{MackensteinMarsch2005,
  author    = {Mackenstein, Hans and Marsch, Steve},
  title     = {The international relations of the European Union / by Steve Marsh and Hans Mackenstein},
  publisher = {Pearson Education},
  address   = {Harlow [u.a.]},
  isbn      = {0-582-47293-8},
  pages     = {XX, 305 S.},
  year      = {2005},
  language  = {en}
}
@article{MackensteinJeffery1999,
  author    = {Mackenstein, Hans and Jeffery, Charlie},
  title     = {Financial equalization in the 1990s : on the road back to Karlsruhe / Hans Mackenstein and Charlie Jeffery},
  series = {Recasting German federalism : the legacies of unification},
  journal   = {Recasting German federalism : the legacies of unification},
  publisher = {Pinter},
  address   = {London},
  isbn      = {1-85567-579-x},
  pages     = {155 -- 176},
  year      = {1999},
  language  = {en}
}
@article{Mackenstein1998,
  author    = {Mackenstein, Hans},
  title     = {Book Reviews - Samardzic, Slobodan and Thomas Fleiner, Federalismus und Minderheitenproblem in Multiethnischen Gemeinschaften},
  series = {Regional and federal studies. 8 (1998), H. 3},
  journal   = {Regional and federal studies. 8 (1998), H. 3},
  isbn      = {1359-7566},
  pages     = {138 -- 138},
  year      = {1998},
  language  = {en}
}
@article{Mackenstein1998,
  author    = {Mackenstein, Hans},
  title     = {Book Reviews - Morass, Michael; Regionale Interessen auf dem Weg in die Europ{\"a}ische Union: Strukturelle Entwicklung und Perspektiven der Interessenvermittlung {\"O}sterreichischer und deutscher L{\"a}ndesakteure im Rahmen der Europ{\"a}ischen Integration},
  series = {Regional and federal studies. 8 (1998), H. 1},
  journal   = {Regional and federal studies. 8 (1998), H. 1},
  isbn      = {1359-7566},
  pages     = {227 -- 227},
  year      = {1998},
  language  = {en}
}
@book{Mackenstein1992,
  author    = {Mackenstein, Hans},
  title     = {The European system of central banks in relation to the Deutsche Bundesbank : a comparative study of the two institutions and their political and social environment / by Hans Wilhelm Mackenstein},
  address   = {Birmingham},
  pages     = {47 Bl.},
  year      = {1992},
  language  = {en}
}
@article{Mackenstein1991,
  author    = {Mackenstein, Hans},
  title     = {The role of Germany, Japan and the United States on the ECU-bond markets / Hans Wilhelm Mackenstein},
  series = {De pecunia. 3 (1991), H. 1},
  journal   = {De pecunia. 3 (1991), H. 1},
  isbn      = {1015-6283},
  pages     = {113 -- 150},
  year      = {1991},
  language  = {en}
}
@article{Mackenstein2000,
  author    = {Mackenstein, Hans},
  title     = {Books Reviewed - European Democratization since 1800 edited by J. Garrard, V. Tolz and R. White},
  series = {Democratization. 7 (2000), H. 4},
  journal   = {Democratization. 7 (2000), H. 4},
  isbn      = {1351-0347},
  pages     = {219 -- 219},
  year      = {2000},
  language  = {en}
}
@article{Mackenstein1999,
  author    = {Mackenstein, Hans},
  title     = {Book Reviews - Cowie, Harry, Private Partnership and Public Networks in Europe},
  series = {Regional and federal studies. 9 (1999), H. 2},
  journal   = {Regional and federal studies. 9 (1999), H. 2},
  isbn      = {1359-7566},
  pages     = {111 -- 111},
  year      = {1999},
  language  = {en}
}