@inproceedings{Klocke2011, author = {Klocke, Martina}, title = {Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik}, series = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen}, booktitle = {Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Pr{\"u}fen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen}, pages = {1 -- 25}, year = {2011}, language = {de} } @inproceedings{SchmidtKaschEichleretal.2021, author = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura}, title = {Process strategies on laser-based melting of glass powder}, series = {Lasers in Manufacturing Conference 2021}, booktitle = {Lasers in Manufacturing Conference 2021}, pages = {10 Seiten}, year = {2021}, abstract = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.}, language = {en} } @inproceedings{RieperGebhardtStucker2016, author = {Rieper, Harald and Gebhardt, Andreas and Stucker, Brent}, title = {Process parameters for Selective Laser Melting of AgCu7}, series = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3}, booktitle = {DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3}, publisher = {Fraunhofer-Verlag}, address = {Stuttgart}, isbn = {978-3-8396-1001-5}, pages = {171 -- 176}, year = {2016}, language = {en} } @inproceedings{VredalWollert2006, author = {Vredal, Andreas and Wollert, J{\"o}rg}, title = {Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen}, series = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)}, booktitle = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091939-6}, pages = {135 -- 146}, year = {2006}, language = {de} } @inproceedings{VedralWollert2006, author = {Vedral, Andreas and Wollert, J{\"o}rg}, title = {Praktische Untersuchungen zum zeitlichen {\"U}bertragungs- und B{\"u}ndelfehlerverhalten der IEEE 802.15.4}, series = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen}, booktitle = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen}, publisher = {Design\&Elektronik}, address = {Poing}, organization = {Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke <2006, M{\"u}nchen>}, year = {2006}, language = {de} } @inproceedings{RoehrigGrossmannKuenemundetal.2008, author = {R{\"o}hrig, Christof and Großmann, Uwe and K{\"u}nemund, Frank and Gansemer, Sebastian and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Positionsbestimmung mittels Funktechnologien - Vergleich von Verfahren und Technologien mit exemplarischer Demonstration}, series = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert}, booktitle = {Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. J{\"o}rg F. Wollert}, publisher = {AKA}, address = {Heidelberg}, isbn = {978-3-89838-608-1}, pages = {337 -- 348}, year = {2008}, language = {de} } @inproceedings{KleineKallweitMichauxetal.2016, author = {Kleine, Harald and Kallweit, Stephan and Michaux, Frank and Havermann, Marc and Olivier, Herbert}, title = {PIV Measurement of Shock Wave Diffraction}, series = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon}, booktitle = {18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon}, pages = {1 -- 14}, year = {2016}, language = {en} } @inproceedings{Wollert2008, author = {Wollert, J{\"o}rg}, title = {Performanceanforderungen von Funkstrecken in der Prozess- und Fertigungsautomation}, series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2008, Baden-Baden>}, isbn = {978-3-18-092032-0}, pages = {247 -- 248}, year = {2008}, language = {de} } @inproceedings{BudaSchneiderWollert2009, author = {Buda, Aurel and Schneider, Ulf and Wollert, J{\"o}rg}, title = {Performanceanalyse von Frequenzdiversit{\"a}t in IEEE 802.15.4 Netzwerken}, series = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)}, booktitle = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-380010-0}, pages = {29 -- 38}, year = {2009}, language = {de} } @inproceedings{WollertRau2012, author = {Wollert, J{\"o}rg and Rau, S.}, title = {Performance von embedded WLAN-Systemen bei koexistierenden Netzwerken}, series = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)}, booktitle = {KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / J{\"u}rgen Jasperneite ... (Hrsg.)}, publisher = {Inst. f{\"u}r Industrielle Informationstechnik}, address = {Lemgo}, organization = {Jahreskolloquium Kommunikation in der Automation <3, 2012, Lemgo>}, isbn = {978-3-9814062-2-1}, pages = {1 CD-ROM}, year = {2012}, language = {de} } @inproceedings{ChudobaKonradSchleseretal.2009, author = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe}, title = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns}, series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009}, booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009}, editor = {Curbach, Manfred}, publisher = {Techn. Univ.}, address = {Dresden}, isbn = {978-3-86780-122-5}, pages = {87 -- 98}, year = {2009}, language = {en} } @inproceedings{Kallweit2012, author = {Kallweit, Stephan}, title = {Pandaboard, TurtleBot, Kinect und Co. : Low-Cost Hardware im Lehreinsatz f{\"u}r die mobile Robotik.}, year = {2012}, abstract = {Mit freundlicher Genehmigung der Autoren und des Oldenbourg Industrieverlags https://www.oldenbourg-industrieverlag.de/de/9783835633223-33223 erschienen als Beitrag im Tagungsband zur AALE-Tagung 2012. 9. Fachkonferenz 4.-5. Mai 2012, Aachen, Fachhochschule. ISBN 9783835633223 S 8-1 S. 229-238 Original-Abstract des Autors: "Die mobile Robotik wird durch den Einsatz von Low-Cost Hardware einem breiten Publikum zug{\"a}nglich. Bis vor kurzem basierte eine erschwingliche Hardware meist auf Mikrocontrollern mit den entsprechenden Leistungseinschr{\"a}nkungen z.B. im Bereich der Bildverarbeitung. Die Wahrnehmung einer 3D-Umgebung und somit die M{\"o}glichkeit zur autonomen Navigation wurde mit relativ kostenintensiver Hardware, z.B. Stereo-Vision-Systemen und Laserscannern gel{\"o}st. Die zur Auswertung der Sensorik notwendige Rechenleistung stand - entweder aufgrund des Stromverbrauchs oder der Performance meist f{\"u}r mobile Plattformen (lokal) - nicht zur Verf{\"u}gung. Durch Einsatz von leistungsf{\"a}higen Prozessoren aus dem Bereich der Mobilger{\"a}te (Smartphones, Tablets) und neuartigen Sensoren des Consumer-Bereichs, wie der Kinect, k{\"o}nnen mobile Roboter kosteng{\"u}nstig f{\"u}r den Einsatz in der Lehre aufgebaut werden.}, subject = {Robotik}, language = {de} } @inproceedings{GrossmannGabrielliHerdrichetal.2015, author = {Großmann, Agnes and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Schnauffer, Peter and Middendorf, Peter and Fateri, Miranda and Gebhardt, Andreas}, title = {Overview of the MultiRob 3D Lunar Industrial Development Project}, series = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, booktitle = {Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015}, pages = {8 S.}, year = {2015}, language = {en} } @inproceedings{SchuermannWollert2008, author = {Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Ortsbezogene Fernwartungsdienste mit Bluetooth Ranging und Java Micro Edition}, series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2008, Baden-Baden>}, isbn = {978-3-18-092032-0}, pages = {353 -- 356}, year = {2008}, language = {de} } @inproceedings{EichlerSkupinThurnetal.2019, author = {Eichler, Fabian and Skupin, Marco and Thurn, Laura and Kasch, Susanne and Schmidt, Thomas}, title = {Operating limits for beam melting of glass materials}, series = {Modern Technologies in Manufacturing (MTeM 2019)}, volume = {299}, booktitle = {Modern Technologies in Manufacturing (MTeM 2019)}, number = {Article 01004}, doi = {10.1051/matecconf/201929901004}, pages = {8 Seiten}, year = {2019}, abstract = {Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.}, language = {en} } @inproceedings{FiedlerGottschlichMuellerMelcher2021, author = {Fiedler, Gerda and Gottschlich-M{\"u}ller, Birgit and Melcher, Karin}, title = {Online-Pr{\"u}fungen mit STACK Aufgaben}, series = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021}, booktitle = {Tagungsband ASIM Workshop STS/GMMS/EDU 2021}, editor = {Liu-Henke, Xiaobo and Durak, Umut}, publisher = {ARGESIM Verlag}, address = {Wien}, isbn = {978-3-901608-69-8}, doi = {10.11128/arep.45}, pages = {6 Seiten}, year = {2021}, abstract = {Wir stellen hier exemplarisch STACK Aufgaben vor, die frei von der Problematik sind, welche sich durch diverse Kommunikationswege und (webbasierte) Computer Algebra Systeme (CAS) ergibt. Daher sind sie insbesondere f{\"u}r eine Open-Book Online Pr{\"u}fung geeignet, da eine faire Pr{\"u}fungssituation gew{\"a}hrleistet werden kann.}, language = {de} } @inproceedings{PfaffBurnham2008, author = {Pfaff, Raphael and Burnham, Keith J.}, title = {On abstraction and interpretability: a behavioural perspective}, series = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada}, booktitle = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Systems Engineering <19, 2008, Las Vegas, Nev.>}, isbn = {978-0-7695-3331-5 ; 978-0-7695-2719-2}, pages = {89 -- 94}, year = {2008}, language = {en} } @inproceedings{Wollert1994, author = {Wollert, J{\"o}rg}, title = {Objekt-orientierte Modellierung hybrider Systeme mit heuristischen und analytischen Merkmalen}, series = {Berichtsband / 4. Workshop "Fuzzy Control" des GMA-UA 1.4.2. am 03./04.11.1994 in Dortmund. (Forschungsbericht / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 1/94)}, booktitle = {Berichtsband / 4. Workshop "Fuzzy Control" des GMA-UA 1.4.2. am 03./04.11.1994 in Dortmund. (Forschungsbericht / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 1/94)}, publisher = {Univ., Fak. f. Elektrotechnik}, address = {Dortmund}, pages = {246 -- 257}, year = {1994}, language = {de} } @inproceedings{ReisgenSchleserScheiketal.2011, author = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.}, title = {Novel process chains for the production of plastics/metal-hybrids}, series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011}, booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011}, editor = {Thoben, Klaus-Dieter}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {Forschungsinstitut f{\"u}r Rationalisierung ; International Conference on Concurrent Enterprising <17, 2011, Aachen>}, isbn = {978-1-457-70772-8 ; 978-3-943024-05-0}, pages = {596 -- 604}, year = {2011}, language = {en} } @inproceedings{PfaffVinsonneauBurnham2006, author = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.}, title = {Multiple models for nonlinear systems}, series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]}, booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]}, organization = {International Conference on Systems Engineering <18, 2006, Coventry>}, isbn = {1-84600-013-0}, pages = {347 -- 352}, year = {2006}, language = {en} } @inproceedings{PfaffMoshiriReichetal.2017, author = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus}, title = {Modelling of the effect of sanding on the wheel-rail adhesion area}, series = {First International Conference on Rail Transportation}, booktitle = {First International Conference on Rail Transportation}, pages = {1 -- 7}, year = {2017}, language = {en} } @inproceedings{Wollert1994, author = {Wollert, J{\"o}rg}, title = {Modellierung intelligenter Regelungen mit analytischen und heuristischen Merkmalen}, series = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994}, booktitle = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994}, publisher = {Techn. Univ.}, address = {Ilmenau}, organization = {Technische Universit{\"a}t }, issn = {0943-7207}, pages = {181 -- 188}, year = {1994}, language = {de} } @inproceedings{MoshiriKahakPfaffGaebeletal.2017, author = {Moshiri-Kahak, Amir and Pfaff, Raphael and G{\"a}bel, Markus and Reich, Alexander}, title = {Modellierung der Adh{\"a}sionsfl{\"a}che im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln}, series = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017}, booktitle = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017}, pages = {3 Seiten}, year = {2017}, language = {de} } @inproceedings{GaoBabilonPfaffetal.2018, author = {Gao, H. and Babilon, Katharina and Pfaff, Raphael and Gan, F. and Reich, A.}, title = {Model of wheel-rail contact for sanding and adhesion enhancement}, series = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018}, booktitle = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018}, isbn = {978-946186963-0}, pages = {314 -- 321}, year = {2018}, language = {en} } @inproceedings{PfaffPichlerGeorgeetal.2007, author = {Pfaff, Raphael and Pichler, Alexander and George, Alfred and Seiler, Friedrich}, title = {Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007}, series = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620}, booktitle = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620}, publisher = {ISL}, address = {Saint Louis, France}, organization = {International Conference on Systems Science <16, 2007, Wroclaw>}, pages = {1 -- 10}, year = {2007}, language = {en} } @inproceedings{Wollert2007, author = {Wollert, J{\"o}rg}, title = {Mobility - Integration von Offboard-Devices in Fahrzeugen}, series = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, booktitle = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, publisher = {Design \& Elektronik}, address = {Poing}, pages = {47 -- 54}, year = {2007}, language = {de} } @inproceedings{KallweitFerreinScholletal.2014, author = {Kallweit, Stephan and Ferrein, Alexander and Scholl, Ingrid and Reichert, Walter}, title = {Mobile Autonome Systeme in der Lehre, am Beispiel der ROS Summer School}, series = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]}, booktitle = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz f{\"u}r Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und F{\"o}rderer der Angewandten Automatisierungstechnik]}, publisher = {Dt. Industrieverl.}, address = {M{\"u}nchen}, isbn = {978-3-8356-7142-3}, pages = {157 -- 163}, year = {2014}, language = {de} } @inproceedings{BudaJozenfiniWollert2007, author = {Buda, Aurel and Jozenfini, B. and Wollert, J{\"o}rg}, title = {Mobile ad-hoc Network for home automation based on ZigBee application framework}, series = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, booktitle = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, publisher = {Design \& Elektronik}, address = {Poing}, organization = {European ZigBee Developer's Conference <1, 2007, M{\"u}nchen>}, pages = {1 -- 5}, year = {2007}, language = {en} } @inproceedings{BraunChengLaietal.2019, author = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg}, title = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system}, series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, pages = {33 -- 37}, year = {2019}, language = {en} } @inproceedings{DannenSchindelePruemmeretal.2022, author = {Dannen, Tammo and Schindele, Benedikt and Pr{\"u}mmer, Marcel and Arntz, Kristian and Bergs, Thomas}, title = {Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking}, series = {Procedia CIRP}, volume = {107}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2022.05.188}, pages = {1539 -- 1544}, year = {2022}, abstract = {Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures. The first stage of the approach specifies the model's initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality.}, language = {en} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2009, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Amdrej V.}, title = {Measurement method of electron beam plasma parameters by non-vacuum electron beam welding}, series = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009}, booktitle = {Beam technologies \& laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009}, editor = {Turichin, G.}, publisher = {Politechnical Univ.}, address = {Saint Petersburg}, organization = {Russian Academy of Science}, pages = {259 -- 267}, year = {2009}, language = {en} } @inproceedings{HuberRauStreblowetal.2014, author = {Huber, Max and Rau, Sebastian and Streblow, Rita and Wollert, J{\"o}rg and M{\"u}ller, Dirk}, title = {L{\"u}ftungskan{\"a}le als Funkstrecke}, series = {Jahreskolloquium Kommunikation in der Automation (KommA 2014) : Lemgo, 18.11.2014 / J{\"u}rgen Jasperneite ... (Hrsg.)}, booktitle = {Jahreskolloquium Kommunikation in der Automation (KommA 2014) : Lemgo, 18.11.2014 / J{\"u}rgen Jasperneite ... (Hrsg.)}, organization = {Jahreskolloquium Kommunikation in der Automation <5, 2014, Lemgo>}, isbn = {978-3-9814062-4-5}, pages = {1 -- 8}, year = {2014}, language = {de} } @inproceedings{SchuermannWollert2008, author = {Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Location based Services in der Geb{\"a}udeautomation}, series = {Wireless Technologies Kongress 2008: von der Technologie zur Anwendung ; [10. Kongress, 23. - 24. September 2008, Bochum]}, booktitle = {Wireless Technologies Kongress 2008: von der Technologie zur Anwendung ; [10. Kongress, 23. - 24. September 2008, Bochum]}, publisher = {Aka}, address = {Heidelberg}, organization = {Wireless-Technologies-Kongress <10, 2008, Bochum>}, isbn = {978-3-89838-608-1}, pages = {313 -- 322}, year = {2008}, language = {de} } @inproceedings{DiltheySchleserHeggeretal.2007, author = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan}, title = {Load-bearing behaviour of polymer-impregnated textiles in concrete}, series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)}, booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)}, editor = {Reinhardt, Hans W.}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>}, isbn = {978-2-35158-046-2}, pages = {183 -- 192}, year = {2007}, language = {en} } @inproceedings{BudaWollert2011, author = {Buda, Aurel and Wollert, J{\"o}rg}, title = {Leistungsbewertung von Ultra Wideband Funktechnologien nach ECMA 368 f{\"u}r den Einsatz in industriellen Kommunikationssystemen}, series = {Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)}, booktitle = {Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)}, publisher = {ifak, Institut f{\"u}r Automation und Kommunikation e.V. Magdeburg an der Otto-von-Guericke-Universit{\"a}t Magdeburg}, address = {Magdeburg}, organization = {Jahreskolloquium Kommunikation in der Automation <2, 2011, Magdeburg>}, isbn = {978-3-940961-58-7}, pages = {1 CD-ROM}, year = {2011}, language = {de} } @inproceedings{FerreinKallweitScholletal.2015, author = {Ferrein, Alexander and Kallweit, Stephan and Scholl, Ingrid and Reichert, Walter}, title = {Learning to Program Mobile Robots in the ROS Summer School Series}, series = {Proceedings 6th International Conference on Robotics in Education (RiE 15)}, booktitle = {Proceedings 6th International Conference on Robotics in Education (RiE 15)}, pages = {6 S.}, year = {2015}, abstract = {The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.}, language = {en} } @inproceedings{WiesenEngemannLimpertetal.2018, author = {Wiesen, Patrick and Engemann, Heiko and Limpert, Nicolas and Kallweit, Stephan}, title = {Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School}, series = {European Robotics Forum 2018, TRROS18 Workshop}, booktitle = {European Robotics Forum 2018, TRROS18 Workshop}, pages = {47 -- 58}, year = {2018}, language = {en} } @inproceedings{AdenackerGerhardsOttenetal.2021, author = {Adenacker, J. and Gerhards, Benjamin and Otten, Christian and Schleser, Markus}, title = {Laserstrahlschweißen von Aluminium-Kupfer-Werkstoffkombinationen f{\"u}r die Elektromobilit{\"a}t}, series = {DVS CONGRESS 2021}, booktitle = {DVS CONGRESS 2021}, publisher = {DVS Media GmbH}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-146-4}, pages = {31 -- 38}, year = {2021}, language = {de} } @inproceedings{Wollert2006, author = {Wollert, J{\"o}rg}, title = {Langzeitstatistische Untersuchungen zur Qualit{\"a}t von Funkkan{\"a}len f{\"u}r das industrielle Umfeld}, series = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, booktitle = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-377210-8}, pages = {165 -- 176}, year = {2006}, language = {de} } @inproceedings{SchuermannKellerWollert2009, author = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg}, title = {Konvergenz von drahtlosen und drahtgebundenen Kommunikationstechnologien in der Geb{\"a}udeautomation}, series = {Wireless technologies : von der Technologie zur Anwendung ; 11. Kongress, 29. - 30. September 2009, Stuttgart / [11. Wireless-Technologies-Kongress]. (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 800)}, booktitle = {Wireless technologies : von der Technologie zur Anwendung ; 11. Kongress, 29. - 30. September 2009, Stuttgart / [11. Wireless-Technologies-Kongress]. (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 800)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Wireless-Technologies-Kongress <11, 2009, Stuttgart>}, isbn = {978-3-18-380010-0}, pages = {197 -- 205}, year = {2009}, language = {de} } @inproceedings{ReisgenSchleserHarmsetal.2010, author = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander}, title = {Konduktiv unterst{\"u}tztes R{\"u}hrreibschweißen an Stahl- und Aluminiumwerkstoffen}, series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>}, isbn = {978-3-87155-592-3}, pages = {394 -- 398}, year = {2010}, language = {de} } @inproceedings{BudaWollert2008, author = {Buda, Aurel and Wollert, J{\"o}rg}, title = {Kompensation von Fading und Koexistenzproblemen in IEEE 802.15.4 Netzwerken durch Diversit{\"a}t : die Kombination macht's m{\"o}glich}, series = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, booktitle = {Automation 2008: L{\"o}sungen f{\"u}r die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2008, Baden-Baden>}, isbn = {978-3-18-092032-0}, pages = {139 -- 142}, year = {2008}, language = {de} } @inproceedings{BagheriSchleupenDahmannetal.2016, author = {Bagheri, Mohsen and Schleupen, Josef and Dahmann, Peter and Kallweit, Stephan}, title = {Kletternde Wartungsplattform f{\"u}r die wetterunabh{\"a}ngige Instandhaltung von Rotorbl{\"a}ttern an Windenergieanlagen - SMART}, series = {AKIDA 2016 Aachener Kolloquium f{\"u}r Instandhaltung, Diagnose und Anlagen{\"u}berwachung (AKIDA) am 15. und 16.11.2016, Technologiezentrum Aachen}, booktitle = {AKIDA 2016 Aachener Kolloquium f{\"u}r Instandhaltung, Diagnose und Anlagen{\"u}berwachung (AKIDA) am 15. und 16.11.2016, Technologiezentrum Aachen}, pages = {21 Folien}, year = {2016}, abstract = {In Deutschland liegt der Anteil der Windkraft an der Gesamtstromerzeugung bei 13,3\% mit mehr als 25.000 installierten Windenergieanlagen (WEA). Weltweit erf{\"a}hrt die Windbranche ein rasantes Wachstum. Indien und China berichten eine j{\"a}hrliche Wachstumsrate an Neuinstallationen von 45\%. Die Technologie zur Erzeugung elektrischer Energie aus Windkraft ist noch vergleichsweise jung. Durch die weltweit steigende Anzahl an Windenergieanlagen w{\"a}chst zunehmend der Bedarf an innovativen Wartungsl{\"o}sungen. Komponenten wie Generator oder Getriebe sind inzwischen weitestgehend ausgereift. Der Fokus richtet sich zunehmend auf die wesentliche Kernkomponente - die Rotorbl{\"a}tter. Industriekletterer inspizieren die Rotorbl{\"a}tter oder T{\"u}rme i.d.R. in einem zwei Jahres Rhythmus. Sie werden zunehmend durch Seilarbeitsb{\"u}hnen unterst{\"u}tzt. F{\"u}r gr{\"o}ßere Reparaturen kommen Kr{\"a}ne zum Einsatz, mit denen das Rotorblatt f{\"u}r die Instandhaltung demontiert wird. Die Standardinspektion besteht aus Sicht- und Klopfpr{\"u}fung der Rotorblattoberfl{\"a}che und ist nur bei sehr ruhiger Wetterlage durchf{\"u}hrbar. Seit September 2014 wird das Forschungsprojekt SMART (Scanning, Monitoring, Analysis, Repair and Transportation), Entwicklung einer Wartungsplattform f{\"u}r WEA, vom BMWi gef{\"o}rdert. Das Konsortium besteht aus zwei Firmen und der Fachhochschule Aachen. Die SMART-Anlage klettert reibschl{\"u}ssig am Turm der WEA mittels speziellen Kettenfahrwerken (Abbildung) auf- und abw{\"a}rts. Ein ringf{\"o}rmiges Spannsystems, basierend auf dem Konzept der „N{\"u}rnberger"-Schere, erzeugt die erforderliche Anpresskraft f{\"u}r den Kletterprozess. Wettergesch{\"u}tzte Arbeitskabinen erm{\"o}glichen die ganzj{\"a}hrige Instandhaltung von Rotorbl{\"a}ttern und ebenso T{\"u}rmen. Dadurch k{\"o}nnen Wartungsarbeiten auf 24 Stunden am Tag ausgeweitet werden. Der kombinierte Einsatz (Sensorfusion) bildgebender Messtechnik wie Thermografie, Ultraschall, und Terahertz in der Arbeitskabine kann die Dokumentation, Effizienz und Qualit{\"a}t der Instandhaltungsarbeiten erheblich verbessern. Langfristiges Ziel von SMART ist ein Condition Monitoring f{\"u}r Rotorbl{\"a}tter und T{\"u}rme auf Basis digitalisierter dreidimensionaler Volumenscans. Der kooperative Einsatz mit UAVs erweitert die Instandhaltungsstrategie. UAVs erm{\"o}glichen die schnelle, kosteng{\"u}nstige globale optische Inspektion von Rotorblattoberfl{\"a}chen zur Detektion potentieller Fehlstellen. Der „Proof-of-Concept" Meilenstein wurde mit der Demonstration eines funktionsf{\"a}higen Modells im Dezember 2015 erfolgreich abgeschlossen.}, language = {de} } @inproceedings{ReisgenSchleserEssersetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Essers, Marc and Thiele, Regina and Schiebahn, Alexander}, title = {Klebstofffixiertes R{\"u}hrreibschweißen von d{\"u}nnen Aluminiumblechen}, series = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, booktitle = {DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vortr{\"a}ge der Veranstaltungen in Saarbr{\"u}cken am 17. und 18. September 2012. (DVS-Berichte ; 286)}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Große Schweißtechnische Tagung <2012, Saarbr{\"u}cken> ; Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren}, isbn = {978-3-87155-593-0}, pages = {20 -- 25}, year = {2012}, language = {de} } @inproceedings{ReisgenSchleserStieglitz2009, author = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja}, title = {Kleben im Schienenfahrzeugbau}, series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>}, isbn = {978-3-87155-584-8}, pages = {182 -- 186}, year = {2009}, language = {de} } @inproceedings{FateriGebhardt2014, author = {Fateri, Miranda and Gebhardt, Andreas}, title = {Jewelry fabrication via selective laser melting of glass}, series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications}, booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications}, isbn = {978-0-7918-4583-7}, doi = {10.1115/ESDA2014-20380}, pages = {V001T06A005}, year = {2014}, abstract = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.}, language = {en} } @inproceedings{WeissHeslenfeldSaeweetal.2022, author = {Weiss, Christian and Heslenfeld, Jonas and Saewe, Jasmin Kathrin and Bremen, Sebastian and H{\"a}fner, Constantin Leon}, title = {Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)}, series = {Procedia CIRP}, volume = {111}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2022.08.102}, pages = {115 -- 120}, year = {2022}, abstract = {In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.}, language = {en} } @inproceedings{ReisgenSchleserSchoeneetal.2012, author = {Reisgen, Uwe and Schleser, Markus and Schoene, Jens and Hegger, Josef and Gallwoszus, J{\"o}rg and Feldmann, Markus and Kopp, Maik and G{\"u}ndel, Max}, title = {Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete}, series = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions}, booktitle = {Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions}, editor = {Cairns, John W.}, publisher = {Publisher creations}, address = {Manerbio, Brescia}, isbn = {978-88-907078-3-4}, pages = {893 -- 898}, year = {2012}, language = {en} } @inproceedings{HuberBleckScheiketal.2011, author = {Huber, Fr{\´e}d{\´e}ric and Bleck, Wolfgang and Scheik, Sven and Schleser, Markus and Reisgen, Uwe}, title = {Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test}, series = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings}, booktitle = {Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings}, publisher = {Associazione Italiana di Metallurgia}, address = {Mailand}, organization = {International Conference on Zinc and Zinc Alloy Coated Steel Sheet <8, 2011, Genua>}, isbn = {978-88-85298-82-8}, pages = {Paper No. 43}, year = {2011}, language = {en} } @inproceedings{ReisgenSchleserAbdurakhmanovetal.2011, author = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander}, title = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding}, series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine}, booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine}, publisher = {Paton Publ. House}, address = {Kiev}, pages = {104 -- 109}, year = {2011}, language = {en} } @inproceedings{DiltheySchleserPuterman2007, author = {Dilthey, Ulrich and Schleser, Markus and Puterman, Moshe}, title = {Investigation and improvement of concrete reinforced with epoxy impregnated fabrics}, series = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007}, booktitle = {Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007}, publisher = {Kangwoon National Univ.}, address = {Chancheon}, isbn = {978-89-9600450-9}, pages = {725 -- 733}, year = {2007}, language = {en} } @inproceedings{Wollert2000, author = {Wollert, J{\"o}rg}, title = {Internettechnologie und Multimedia f{\"u}r Steuerungssysteme}, series = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)}, booktitle = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)}, publisher = {H{\"u}thig}, address = {Heidelberg}, organization = {SPS IPC Drives <11, 2000, N{\"u}rnberg>}, isbn = {3-7785-2836-X}, pages = {78 -- 86}, year = {2000}, language = {de} } @inproceedings{ThomasWollert2000, author = {Thomas, F. and Wollert, J{\"o}rg}, title = {Internet und OO-Systeme in der Logistik}, series = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)}, booktitle = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)}, publisher = {VDI-Verl.}, address = {H{\"u}thig}, organization = {Gesellschaft F{\"o}rdertechnik, Materialfluss und Logistik}, isbn = {3180915773}, pages = {149 -- 164}, year = {2000}, language = {de} } @inproceedings{SchuermannKellerWollert2009, author = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg}, title = {Internet based middleware approach for building services}, series = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1}, booktitle = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1}, publisher = {IIIS}, address = {Winter Garden, Fla.}, organization = {International Multi-Conference on Engineering and Technological Innovation <2, 2009, Orlando, Fla.>}, isbn = {1-934272-68-X ; 978-1-934272-68-8}, pages = {30 -- 34}, year = {2009}, language = {en} } @inproceedings{ReisgenSchleserMokrovetal.2009, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam and Schmidt, Andre and Rossiter, Eduardo}, title = {Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter}, series = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar}, booktitle = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar}, editor = {Hildebrand, J{\"o}rg}, publisher = {Univ.-Verl.}, address = {Weimar}, isbn = {978-3-86068-401-6}, pages = {32 -- 41}, year = {2009}, language = {de} } @inproceedings{UlmerLaiChengetal.2019, author = {Ulmer, Jessica and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg}, title = {Integration von VR und AR in Produktlebenszyklen - Eine {\"U}bersicht {\"u}ber die Nutzung virtueller Technologien im industriellen Umfeld}, series = {Automation 2019}, booktitle = {Automation 2019}, pages = {1 -- 12}, year = {2019}, language = {de} } @inproceedings{WiezikHoetterGebhardt2015, author = {Wiezik, P. and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas}, title = {Integration des Laserpolierens in den SLM-Prozess}, series = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015}, volume = {315}, booktitle = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015}, publisher = {Verl. f{\"u}r Schweißen und verwandte Verfahren, DVS-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-945023-46-4}, pages = {117 -- 120}, year = {2015}, language = {de} } @inproceedings{SchuermannMannBudaetal.2009, author = {Sch{\"u}rmann, Volker and Mann, Thorsten and Buda, Aurel and Wollert, J{\"o}rg}, title = {Integrating bluetooth localization into existing TCP/IP networks}, series = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009}, booktitle = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Workshop on Intelligent Data Acquisition and Advanced Computing Systems <5, 2009, Rende, Cosenza, Italy>}, isbn = {978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9}, doi = {10.1109/IDAACS.2009.5342903}, pages = {621 -- 624}, year = {2009}, language = {en} } @inproceedings{KolkmannGriesSchleseretal.2005, author = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich}, title = {Innovative yarn structures and coatings for textile reinforced concrete}, series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main}, booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main}, address = {Frankfurt a.M.}, pages = {1 CD-ROM}, year = {2005}, language = {en} } @inproceedings{OttenGerhardsSchleseretal.2019, author = {Otten, Christian and Gerhards, Benjamin and Schleser, Markus and Schwarz, A. and Gebhardt, Andreas}, title = {Innovative Laserschweißtechnologie f{\"u}r additiv gefertigte Bauteile}, series = {Große Schweißtechnische Tagung}, booktitle = {Große Schweißtechnische Tagung}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-066-5}, pages = {150 -- 157}, year = {2019}, language = {de} } @inproceedings{GerhardsSchleserOttenetal.2019, author = {Gerhards, Benjamin and Schleser, Markus and Otten,, Christian and Schwarz, Alexander and Gebhardt, Andreas}, title = {Innovative Laser Beam Joining Technology for Additive Manufactured Parts}, series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, pages = {1 -- 8}, year = {2019}, language = {en} } @inproceedings{Wollert2016, author = {Wollert, J{\"o}rg}, title = {Industrie 4.0 - warten bis die Revolution vorbei ist?}, series = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, booktitle = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, publisher = {DIV Deutscher Industrieverlag GmbH}, address = {M{\"u}nchen}, isbn = {978-3-8356-7312-0}, pages = {127 -- 136}, year = {2016}, language = {de} } @inproceedings{AlhwarinFerreinGebhardtetal.2015, author = {Alhwarin, Faraj and Ferrein, Alexander and Gebhardt, Andreas and Kallweit, Stephan and Scholl, Ingrid and Tedjasukmana, Osmond Sanjaya}, title = {Improving additive manufacturing by image processing and robotic milling}, series = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden}, booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden}, doi = {10.1109/CoASE.2015.7294217}, pages = {924 -- 929}, year = {2015}, language = {en} } @inproceedings{SchleserDiltheyMundetal.2007, author = {Schleser, Markus and Dilthey, Ulrich and Mund, F. and B{\"o}hm, Stefan}, title = {Improvement of textile reinforced concrete by use of polymers}, series = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)}, booktitle = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)}, editor = {Czarnecki, Lech and Garbacz, Andrzej}, publisher = {Aedificatio Publ.}, address = {Freiburg}, isbn = {978-3-931681-89-0}, pages = {153 -- 162}, year = {2007}, language = {en} } @inproceedings{DiltheyMundRaupachetal.2004, author = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd}, title = {Improvement of textile reinforced concrete by polymer additives}, series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch}, booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch}, publisher = {BAM}, address = {Berlin}, isbn = {3-00-013706-8}, pages = {469 -- 476}, year = {2004}, language = {en} } @inproceedings{SeilerPichlerPfaffetal.2008, author = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and George, Alfred and Srulijes, Julio}, title = {Improved Doppler picture velocimetry and new automated processing}, series = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008}, booktitle = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008}, organization = {International Symposium on Applications of Laser Techniques to Fluid Mechanics <14, 2008, Lisboa>}, pages = {1 -- 12}, year = {2008}, language = {en} } @inproceedings{ReisgenSchoeneSchleseretal.2009, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Gries, Thomas and Glowania, Michael}, title = {Impregnated textile reinforcements for concrete applications}, series = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009}, booktitle = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009}, pages = {7 S.}, year = {2009}, language = {en} } @inproceedings{EngemannBadriWenningetal.2019, author = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan}, title = {Implementation of an Autonomous Tool Trolley in a Production Line}, series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980}, booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-19648-6}, doi = {10.1007/978-3-030-19648-6_14}, pages = {117 -- 125}, year = {2019}, language = {en} } @inproceedings{PlessmannWollert1993, author = {Pleßmann, K. W. and Wollert, J{\"o}rg}, title = {Hybride Beobachter zur Regelung arbeitspunktabh{\"a}ngiger Regelstrecken}, series = {Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 2/93)}, booktitle = {Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 2/93)}, publisher = {Univ., Fak. Elektrotechnik}, address = {Dortmund}, pages = {122 -- 126}, year = {1993}, language = {de} } @inproceedings{Wollert1994, author = {Wollert, J{\"o}rg}, title = {Hybride arbeitspunktabh{\"a}ngige Beobachter zur intelligenten Modellierung und Regelung nichtlinearer Strecken}, series = {Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. M{\"a}rz 1994. (VDI-Berichte ; 1113)}, booktitle = {Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. M{\"a}rz 1994. (VDI-Berichte ; 1113)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik}, isbn = {3-18-091113-1}, pages = {497 -- 506}, year = {1994}, language = {de} } @inproceedings{PakPiegelerFeldmannetal.2006, author = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich}, title = {Hybrid joints of textile reinforced concrete parts - designed for assembly}, series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, editor = {Hegger, Josef}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>}, isbn = {2-912143-97-7}, pages = {181 -- 190}, year = {2006}, language = {en} } @inproceedings{Wollert1999, author = {Wollert, J{\"o}rg}, title = {Harte Echtzeit f{\"u}r Windows}, series = {Tagungsband : SPS/IPC/Drives '99 : 10. Fachmesse und Kongress, 23. - 25. November 1999 N{\"u}rnberg}, booktitle = {Tagungsband : SPS/IPC/Drives '99 : 10. Fachmesse und Kongress, 23. - 25. November 1999 N{\"u}rnberg}, publisher = {H{\"u}thig}, address = {Heidelberg}, organization = {SPS IPC Drives <10, 1999, N{\"u}rnberg>}, isbn = {3-7785-2788-6}, pages = {172 -- 182}, year = {1999}, language = {de} } @inproceedings{Wollert2010, author = {Wollert, J{\"o}rg}, title = {Grundlagen Wireless Technologie}, series = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, booktitle = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, pages = {322 -- 330}, year = {2010}, language = {de} } @inproceedings{Wollert2006, author = {Wollert, J{\"o}rg}, title = {Grundlagen Wireless - Was kann von Funktechnik erwartet werden?}, series = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, booktitle = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-377210-8}, pages = {314 -- 323}, year = {2006}, language = {de} } @inproceedings{UlmerBraunWollert2018, author = {Ulmer, Jessica and Braun, Sebastian and Wollert, J{\"o}rg}, title = {Generische IoT Adapter f{\"u}r semantische Maschinenschnittstellen}, series = {Internet of Things - vom Sensor bis zur Cloud}, booktitle = {Internet of Things - vom Sensor bis zur Cloud}, pages = {1 -- 5}, year = {2018}, language = {de} } @inproceedings{UlmerBraunLaietal.2019, author = {Ulmer, Jessica and Braun, Sebastian and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg}, title = {Generic integration of VR and AR in product lifecycles based on CAD models}, series = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, booktitle = {Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, year = {2019}, language = {en} } @inproceedings{Gebhardt2015, author = {Gebhardt, Andreas}, title = {Generative Fertigungsverfahren in der Produktentwicklung}, series = {Spritzgießen 2015}, booktitle = {Spritzgießen 2015}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, organization = {VDI-Gesellschaft Kunststofftechnik (VDI-K), Baden-Baden, DE, 10.-11.Feb, 2015}, isbn = {978-3-18-234336-3}, pages = {1 -- 19}, year = {2015}, language = {de} } @inproceedings{SchuermannKellerWollert2010, author = {Sch{\"u}rmann, Volker and Keller, A. and Wollert, J{\"o}rg}, title = {Geb{\"a}udeautomation mit Webtechnologien : ein Erfahrungsbericht}, series = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)}, booktitle = {Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. (VDI-Berichte ; 2092)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, isbn = {978-3-18-092092-4}, pages = {321 -- 324}, year = {2010}, language = {de} } @inproceedings{ChavezBermudezWollert2019, author = {Chavez Bermudez, Victor Francisco and Wollert, J{\"o}rg}, title = {Gateway for Automation Controllers and Cloud based Voice Recognition Services}, series = {KommA, 10. Jahreskolloquium Kommunikation in der Automation}, booktitle = {KommA, 10. Jahreskolloquium Kommunikation in der Automation}, publisher = {Institut f{\"u}r Automation und Kommunikation}, address = {Magdeburg}, organization = {KommA, 2019, Jahreskolloquium Kommunikation in der Automation, 10., Lemgo, DE, 2019-11-20 - 2019-11-21}, isbn = {978-3-944722-85-6}, pages = {1 -- 8}, year = {2019}, language = {en} } @inproceedings{UlmerBraunChengetal.2020, author = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg}, title = {Gamified Virtual Reality Training Environment for the Manufacturing Industry}, doi = {10.1109/ME49197.2020.9286661}, pages = {1 -- 6}, year = {2020}, language = {de} } @inproceedings{ReisgenSchoeneSchleseretal.2009, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel and Feldmann, Markus}, title = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton}, series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>}, isbn = {978-3-87155-584-8}, pages = {312 -- 318}, year = {2009}, language = {de} } @inproceedings{ReisgenSchoeneSchleseretal.2010, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel}, title = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton}, series = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)}, booktitle = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Assistentenseminar F{\"u}ge- und Schweißtechnik <30, 2009, Warberg> ; Institut f{\"u}r Schweiß- und F{\"u}getechnik }, isbn = {978-3-87155-260-1}, pages = {36 -- 43}, year = {2010}, language = {de} } @inproceedings{BudaSchuermannWollert2009, author = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Funktechnologien im 2,45 GHz ISM Frequenzband: {\"U}berblick und Coexistenzeigenschaften}, series = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009. (VDI-Berichte ; 2067)}, booktitle = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009. (VDI-Berichte ; 2067)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2009, Baden-Baden>}, isbn = {978-3-18-092067-2}, pages = {383 -- 386}, year = {2009}, language = {de} } @inproceedings{EnningFratscher2017, author = {Enning, Manfred and Fratscher, Ren{\´e}}, title = {Funk-Kommunikation f{\"u}r G{\"u}terwagen: Prinzipien und Anwendungsbeispiel}, series = {IRSA International Railway Symposium Aachen}, booktitle = {IRSA International Railway Symposium Aachen}, pages = {1 -- 16}, year = {2017}, language = {de} } @inproceedings{ReisgenSchleserScheik2009, author = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven}, title = {Fortschritte beim linienf{\"o}rmigen Mikrodispensen ungef{\"u}llter Klebstoffe}, series = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009}, booktitle = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009}, editor = {Vollertsen, Frank and B{\"u}ttgenbach, Stephanus}, publisher = {BIAS Verl.}, address = {Bremen}, organization = {Kolloquium Mikroproduktion <4, 2009, Bremen>}, isbn = {978-3-933762-32-0}, pages = {43 -- 51}, year = {2009}, language = {de} } @inproceedings{Raatschen1985, author = {Raatschen, Hans-J{\"u}rgen}, title = {Fokussierung ebener Spannungswellen in einer linearelastischen Scheibe}, series = {Sonderforschungsbereich 27 Wellenfokussierung der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen, Kolloquium 3. und 4. Juli 1985}, booktitle = {Sonderforschungsbereich 27 Wellenfokussierung der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen, Kolloquium 3. und 4. Juli 1985}, address = {Aachen}, pages = {105 -- 118}, year = {1985}, language = {de} } @inproceedings{StarkeKunkelHahn2013, author = {Starke, G{\"u}nther and Kunkel, Thomas and Hahn, Daniel}, title = {Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept}, series = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)}, booktitle = {2013 IEEE International Conference on Industrial Technologies (ICIT-13)}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Industrial Technologies <2013, Cape Town>}, isbn = {978-1-4673-4567-5 ; 978-1-4673-4569-9}, pages = {1982 -- 1987}, year = {2013}, language = {en} } @inproceedings{KilicRaatschenAstanehAsletal.2015, author = {Kilic, S. A. and Raatschen, Hans-J{\"u}rgen and Astaneh-Asl, A. and Apaydin, N. M.}, title = {Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge}, series = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges}, booktitle = {Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges}, publisher = {CRC Press}, address = {Leiden}, isbn = {9781138027572}, pages = {1169 -- 1173}, year = {2015}, language = {en} } @inproceedings{GebhardtSchmidt2005, author = {Gebhardt, Andreas and Schmidt, Frank-Michael}, title = {Farbige Prototypen als Werkzeug f{\"u}r den Konstrukteur}, year = {2005}, abstract = {Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch f{\"u}r die B{\"u}roumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe" der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have" oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe" dar{\"u}ber hinaus?}, subject = {Prototyping}, language = {de} } @inproceedings{Wollert2007, author = {Wollert, J{\"o}rg}, title = {Fahrzeug-Umwelt Kommunikation? Chancen und Herausforderungen}, series = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, booktitle = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, publisher = {Design \& Elektronik}, address = {Poing}, pages = {39 -- 46}, year = {2007}, language = {de} } @inproceedings{AdomeitWillms1984, author = {Adomeit, G. and Willms, Herbert}, title = {Experimental investigation of the acceleration of deflagration in wake flow}, series = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities}, booktitle = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities}, editor = {Skupinski, Edwin}, publisher = {Graham \& Trotman [u.a.]}, address = {London Gaithersburg, Md.}, isbn = {0-86010-678-0}, pages = {294 -- 304}, year = {1984}, language = {en} } @inproceedings{FateriGebhardtKhosravi2013, author = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar}, title = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications}, series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing}, booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing}, publisher = {ASME}, organization = {American Society of Mechanical Engineers}, isbn = {978-0-7918-5618-5}, pages = {V02AT02A008}, year = {2013}, language = {en} } @inproceedings{DiltheySchleserChudobaetal.2007, author = {Dilthey, Ulrich and Schleser, Markus and Chudoba, Rostislav and Konrad, Martin}, title = {Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics}, series = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007}, booktitle = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007}, editor = {Triantafillou, T. C.}, publisher = {Univ.}, address = {Patras}, organization = {International Symposium on Fibre-Reinforced Polymer Reinforcement for Concrete Structures <8, 2007, Patras>}, isbn = {9608969107}, pages = {456 -- 457}, year = {2007}, language = {en} } @inproceedings{RaupachOrlowskyBuettneretal.2006, author = {Raupach, Michael and Orlowsky, Jeannette and B{\"u}ttner, T. and Dilthey, Ulrich and Schleser, Markus}, title = {Epoxy-impregnated textiles in concrete - load bearing capacity and durability}, series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, editor = {Hegger, Josef}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>}, isbn = {2-912143-97-7}, pages = {77 -- 88}, year = {2006}, language = {en} } @inproceedings{LeidingerSchuermannWollertetal.2010, author = {Leidinger, Rafael and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg and Schneider, Christoph}, title = {Entwicklungsprojekt BASic - Bluetooth Authentication Service}, series = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, booktitle = {Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-381010-9}, pages = {296 -- 303}, year = {2010}, language = {de} } @inproceedings{KallweitSchleupenDahmannetal.2016, author = {Kallweit, Stephan and Schleupen, Josef and Dahmann, Peter and Bagheri, Mohsen and Engemann, Heiko}, title = {Entwicklung eines Kletterroboters zur Diagnose und Instandsetzung von Windenergieanlagen (SMART)}, series = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, booktitle = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, publisher = {DIV Deutscher Industrieverlag GmbH}, address = {M{\"u}nchen}, isbn = {978-3-8356-7312-0}, pages = {207 -- 212}, year = {2016}, language = {de} } @inproceedings{WiesenSchleser2019, author = {Wiesen, Andreas and Schleser, Markus}, title = {Entwicklung einer Qualit{\"a}tssicherung f{\"u}r das Laserstrahlschweißen im Vakuum mittels Bildverarbeitung}, series = {Große Schweißtechnische Tagung}, booktitle = {Große Schweißtechnische Tagung}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-066-5}, pages = {1 -- 6}, year = {2019}, language = {de} } @inproceedings{UlmerWollertChengetal.2020, author = {Ulmer, Jessica and Wollert, J{\"o}rg and Cheng, C. and Dowey, S.}, title = {Enterprise Gamification f{\"u}r produzierende mittelst{\"a}ndische Unternehmen}, series = {Shaping automation for our future: 21. Leitkongress Mess- u. Automatisierungstechnik : Automation 2020 : 30. Juni u. 01. Juli 2020}, booktitle = {Shaping automation for our future: 21. Leitkongress Mess- u. Automatisierungstechnik : Automation 2020 : 30. Juni u. 01. Juli 2020}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-18-092375-8}, pages = {157 -- 165}, year = {2020}, language = {de} } @inproceedings{GoettscheHinschWittwer1992, author = {G{\"o}ttsche, Joachim and Hinsch, Andreas and Wittwer, Volker}, title = {Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique}, series = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)}, booktitle = {Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Lab{\`e}ge. (SPIE proceedings series. 1728)}, editor = {Hugo-Le Goff, Anne}, publisher = {SPIE}, address = {Bellingham, Wash.}, isbn = {0-8194-0901-4}, pages = {13 -- 25}, year = {1992}, language = {en} } @inproceedings{Wollert2003, author = {Wollert, J{\"o}rg}, title = {Einsatz von Wireless Technologien im Kraftfahrzeug}, series = {Sichere Datenkommunikation im Automobil : Kongress ; 18. - 19. November 2003, Radisson SAS Hotel, K{\"o}ln}, booktitle = {Sichere Datenkommunikation im Automobil : Kongress ; 18. - 19. November 2003, Radisson SAS Hotel, K{\"o}ln}, address = {K{\"o}ln}, organization = {ESCAR-Tagung <2003, K{\"o}ln>}, pages = {Getr. Z{\"a}hlung}, year = {2003}, language = {de} }