@inproceedings{SchmittSchollCaietal.2010,
  author    = {Schmitt, Robert and Scholl, Ingrid and Cai, Yu and Xia, Ji and Dziwoki, Paul and Harding, Martin and Pavim, Alberto},
  title     = {Machine vision system for inline inspection in carbide insert production},
  series = {Proceedings of the 36th International MATADOR Conference},
  booktitle = {Proceedings of the 36th International MATADOR Conference},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-1-84996-431-9},
  doi       = {10.1007/978-1-84996-432-6_77},
  pages     = {339 -- 342},
  year      = {2010},
  abstract  = {In steps of the production chain of carbide inserts, such as unloading or packaging, the conformity test of the insert type is done manually, which causes a statistic increase of errors due to monotony and fatigue of the worker and the wide variety of the insert types. A machine vision system is introduced that captures digital frames of the inserts in the production line, analyses inspects automatically and measures four quality features: coating colour, edge radius, plate shape and chip-former geometry. This new method has been tested on several inserts of different types and has shown that the prevalent insert types can be inspected and robustly classified in real production environment and therefore improves the manufacturing automation.},
  language  = {en}
}
@incollection{StaatSponagelNguyen2010,
  author    = {Staat, Manfred and Sponagel, Stefan and Nguyen, Nhu Huynh},
  title     = {Experiment and material model for soft tissue materials},
  series = {Constitutive models for rubber VI},
  booktitle = {Constitutive models for rubber VI},
  publisher = {Taylor \& Francis},
  address   = {London},
  isbn      = {9780429206597 (eBook)},
  doi       = {10.1201/NOE0415563277-90},
  pages     = {6 Seiten},
  year      = {2010},
  abstract  = {Biomechanics studies biological soft tissue materials (growth, remodeling) in vivo. For this objective, the detailed information of material properties must be well defined to construct reliable constitutive models. In the paper, the bulge test is carried out with elastomers in order to develop a test method. Then, application of the test for soft tissue materials is straightforward due to the similarities between elastomers with soft tissue materials as proved in Holzapfel 2005, Ogden 2009. It means, after the preliminary experiments and parameter identification with rubber materials has been setup, experiments on soft tissue materials can be similarly carried out. Elastomers have a complex behavior which strongly depends on the largest previous load cycle. For simplicity we consider only the first loading.},
  language  = {en}
}
@inproceedings{PhamVuTranetal.2010,
  author    = {Pham, Phu Tinh and Vu, Khoi Duc and Tran, Thanh Ngoc and Staat, Manfred},
  title     = {A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies},
  year      = {2010},
  language  = {en}
}
@inproceedings{NguyenRaatschenStaat2010,
  author    = {Nguyen, N.-H. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {A hyperelastic model of biological tissue materials in tubular organs},
  year      = {2010},
  language  = {en}
}
@inproceedings{TranStaat2010,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method},
  year      = {2010},
  language  = {en}
}
@article{ChristenKowalskiBartelt2010,
  author    = {Christen, Marc and Kowalski, Julia and Bartelt, Perry},
  title     = {RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain},
  series = {Cold Regions Science and Technology},
  volume    = {63},
  journal   = {Cold Regions Science and Technology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7441},
  doi       = {10.1016/j.coldregions.2010.04.005},
  pages     = {1 -- 14},
  year      = {2010},
  abstract  = {Numerical avalanche dynamics models have become an essential part of snow engineering. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, their application poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to construct hazard scenarios which involve the careful specification of initial conditions (release zone location and dimensions) and definition of appropriate friction parameters. The interpretation of simulation results requires an understanding of the numerical solution schemes and easy to use visualization tools. We discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with accurate second-order numerical solution schemes. The model allows the specification of multiple release zones in three-dimensional terrain. Snow cover entrainment is considered. Furthermore, two different flow rheologies can be applied: the standard Voellmy-Salm (VS) approach or a random kinetic energy (RKE) model, which accounts for the random motion and inelastic interaction between snow granules. We present the governing differential equations, highlight some of the input and output features of RAMMS and then apply the models with entrainment to simulate two well-documented avalanche events recorded at the Vall{\´e}e de la Sionne test site.},
  language  = {en}
}
@article{HerzogPietrzykShahetal.2010,
  author    = {Herzog, Hans and Pietrzyk, Uwe and Shah, N. Jon and Ziemons, Karl},
  title     = {The current state, challenges and perspectives of MR-PET},
  series = {Neuroimage},
  volume    = {49},
  journal   = {Neuroimage},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1053-8119},
  doi       = {10.1016/j.neuroimage.2009.10.036},
  pages     = {2072 -- 2082},
  year      = {2010},
  abstract  = {Following the success of PET/CT during the last decade and the recent increasing proliferation of SPECT/CT, another hybrid imaging instrument has been gaining more and more interest: MR-PET. First combined, simultaneous PET and MR studies carried out in small animals demonstrated the feasibility of the new approach. Concurrently, some prototypes of an MR-PET scanner for simultaneous human brain studies have been built, their performance is being tested and preliminary applications have already been shown. Through this pioneering work, it has become clear that advances in the detector design are necessary for further optimization. Recently, the different issues related to the present state and future prospects of MR-PET were presented and discussed during an international 2-day workshop at the Forschungszentrum J{\"u}lich, Germany, held after, and in conjunction with, the 2008 IEEE Nuclear Science Symposium and Medical Imaging Conference in Dresden, Germany on October 27-28, 2008. The topics ranged from small animal MR-PET imaging to human MR-BrainPET imaging, new detector developments, challenges/opportunities for ultra-high field MR-PET imaging and considerations of possible future research and clinical applications. This report presents a critical summary of the contributions made to the workshop.},
  language  = {en}
}
@article{OlbertzThiergart2010,
  author    = {Olbertz, Klaus and Thiergart, Kirsten},
  title     = {B{\"o}rsengang leicht gemacht? Gesellschafts- und arbeitsrechtliche Aspekte bei {\"U}bernahme und Verschmelzung eines Zielunternehmens auf die SPAC in der Rechtsform der SE},
  series = {Betriebs-Berater: BB ; Recht, Wirtschaft, Steuern},
  journal   = {Betriebs-Berater: BB ; Recht, Wirtschaft, Steuern},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0340-7918},
  pages     = {1547},
  year      = {2010},
  abstract  = {Die SPAC-SE ist b{\"o}rsenf{\"a}hig und damit eine f{\"u}r eine SPAC grunds{\"a}tzlich geeignete Rechtsform. Die Tatsache, dass es sich hierbei (zun{\"a}chst) um eine leere, arbeitnehmerlose H{\"u}lle handelt, {\"a}ndert hieran nichts. Die Gr{\"u}ndung einer solchen Vorrats-SE ist trotz fehlender Arbeitnehmerbeteiligung unter teleologischer Reduktion von Art. 12 II SE-VO zul{\"a}ssig. Im Gegenzug muss die Arbeitnehmerbeteiligung gemaß \S 18 III SEBG analog nachgeholt werden, wenn das sp{\"a}ter erworbene Zielunternehmen auf die SPAC-SE verschmolzen werden soll. Aus gesellschaftsrechtlicher Sicht ist zu beachten, dass die SPAC-SE mit Sitz in Deutschland, welche auch den deutschen, aktienrechtlichen Bestimmungen unterliegt, nur bedingt f{\"u}r eine SPAC geeignet erscheint. Das deutsche Aktienrecht enth{\"a}lt strenge Regelungen, die der f{\"u}r eine SPAC-SE erforderlichen Flexibilit{\"a}t entgegenstehen k{\"o}nnen. Dies gilt insbesondere f{\"u}r das Erfordernis der Zustimmung der Hauptversammlung zur Akquisition des Zielunternehmens, die R{\"u}ckzahlung des Treuhandverm{\"o}gens an Aktion{\"a}re, die der Akquisition nicht zugestimmt haben und die Liquidation der SPAC-SE im Falle des Scheiterns des Erwerbs des Zielobjektes.},
  language  = {de}
}
@article{RiglingEilmannKoechlietal.2010,
  author    = {Rigling, Andreas and Eilmann, Britta and Koechli, Roger and Dobbertin, Matthias},
  title     = {Mistletoe-induced crown degradation in Scots pine in a xeric environment},
  series = {Tree Physiology},
  volume    = {30},
  journal   = {Tree Physiology},
  number    = {7},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1758-4469 (Online)},
  doi       = {10.1093/treephys/tpq038},
  pages     = {845 -- 832},
  year      = {2010},
  abstract  = {Increasing Scots pine (Pinus sylvestris L.) mortality has been recently observed in the dry inner valleys of the European Alps. Besides drought, infection with pine mistletoe (Viscum album ssp. austriacum) seems to play an important role in the mortality dynamics of Scots pines, but how mistletoes promote pine decline remains unclear. To verify whether pine mistletoe infection weakens the host via crown degradation, as observed for dwarf mistletoes, we studied the negative effects of pine mistletoe infestation on the photosynthetic tissues and branch growth of pairs of infested and non-infested branches. Pine mistletoe infection leads to crown degradation in its host by reducing the length, the radial increment, the ramification, the needle length and the number of needle years of the infested branches. This massive loss in photosynthetic tissue results in a reduction in primary production and a subsequent decrease in carbohydrate availability. The significant reduction in needle length due to mistletoe infection is an indication for a lower water and nutrient availability in infested branches. Thus, mistletoe infection might lead to a decrease in the availability of water and carbohydrates, the two most important growth factors, which are already shortened due to the chronic drought situation in the area. Therefore, pine mistletoe increases the risk of drought-induced mortality of its host when growing in a xeric environment.},
  language  = {en}
}
@inproceedings{Hirschberg2010,
  author    = {Hirschberg, Rainer},
  title     = {Energetische Bewertung raumlufttechnischer Anlagen. Vereinfachtes Verfahren nach DIN V 18599},
  series = {Deutsche K{\"a}lte-Klima-Tagung 2010 Magdeburg},
  booktitle = {Deutsche K{\"a}lte-Klima-Tagung 2010 Magdeburg},
  publisher = {DKV},
  address   = {Hannover},
  isbn      = {978-3-932715-46-4},
  pages     = {26 Seiten},
  year      = {2010},
  abstract  = {Unter Energieeffizienz wird verstanden, dass ein definiertes Ziel mit m{\"o}glichst wenig Energie erreicht wird. Im Beitrag wird zun{\"a}chst eine Formel zur Berechnung der Gesamtenergieeffizienz eines Geb{\"a}udes angegeben. Darauf aufbauend wird ein 3-S{\"a}ulen-Modell zur Energieeinsparung vorgeschlagen. Es beinhaltet vereinfachte Verfahren zur Berechnung der Betriebseigenschaften von Heizanlagen, raumlufttechnischen Anlagen und K{\"u}hl- und Kaltwasseranlagen. Am Beispiel einer RLT-Anlage wird die Vorgehensweise der Bewertung n{\"a}her erl{\"a}utert. Zusammenfassend wird festgestellt, dass das vereinfachte Verfahren eine schnelle und sichere energetische Bewertung der genannten Anlagen erlaubt,, zu Pr{\"a}senzwissen f{\"u}hrt, die Haupteinflussgr{\"o}ßen aufzeigt und eine Anlagenbewertung ohne Geb{\"a}udebewertung gew{\"a}hrleistet. Das vereinfachte Verfahren wird im Fr{\"u}hjahr 2011 verf{\"u}gbar sein. Es soll Bestandteil der DIN V 18599 werden, und die EnEV 2012 soll darauf Bezug nehmen.},
  language  = {de}
}
@article{KirchnerOberlaenderFriedrichetal.2010,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Friedrich, Peter and Rysstad, Gunnar and Berger, J{\"o}rg and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.098},
  pages     = {264 -- 267},
  year      = {2010},
  abstract  = {A calorimetric gas sensor is presented for the monitoring of gas-phase H2O2 at elevated temperature during sterilization processes in aseptic food industry. The sensor consists of two temperature-sensitive thin-film resistances built up on a polyimide foil with a thickness of 25 μm, which are passivated with a layer of SU-8 photo resist and catalytically activated with manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilizes the elevated temperature of an evaporated H2O2 aerosol. In an experimental set-up, the sensor has shown a sensitivity of 4.78 °C/(\%v/v) in a H2O2 concentration range of 0 to 10\% v/v at an evaporation temperature of 240 ∘C. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied evaporation temperatures of the gas stream. The sensor characterization demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of sterilization processes.},
  language  = {en}
}
@article{WagnerMiyamotoSchoeningetal.2010,
  author    = {Wagner, Torsten and Miyamoto, Ko-ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Novel combination of digital light processing (DLP) and light-addressable potentiometric sensors (LAPS) for flexible chemical imaging},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.161},
  pages     = {520 -- 523},
  year      = {2010},
  abstract  = {Chemical imaging systems allow the visualisation of the distribution of chemical species on the sensor surface. This work represents a new flexible approach of read out in a light-addressable potentiometric sensor (LAPS) with the help of a digital light processing (DLP) set-up. The DLP, known well for video projectors, consists of a mirror-array MEMS device which allows fast and flexible generation of light patterns. With the help of these light patterns the sensor surface of the LAPS device can be read out sequentially in a raster like scheme (scanning LAPS). The DLP approach has several advantages compared to conventional scanning LAPS set-ups, e.g., the spot size, the shape and the intensity of the light pointer can be changed easily and no mechanical movement is necessary, which reduces the size of the set-up and increases the stability and speed of measurement.},
  language  = {en}
}
@article{MiyamotoKanekoMatsuoetal.2010,
  author    = {Miyamoto, Ko-ichiro and Kaneko, Kazumi and Matsuo, Akira and Wagner, Torsten and Kanoh, Shin`ichiro and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Miniaturized chemical imaging sensor system using an OLED display panel},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.160},
  pages     = {516 -- 519},
  year      = {2010},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the two-dimensional distribution of specific ions or molecules in the solution. In this study, we developed a miniaturized chemical imaging sensor system with an OLED display panel as a light source that scans the sensor plate. In the proposed configuration, the display panel is placed directly below the sensor plate and illuminates the back surface. The measured area defined by illumination can be arbitrarily customized to fit the size and the shape of the sample to be measured. The waveform of the generated photocurrent, the currentvoltage characteristics and the pH sensitivity were investigated and pH imaging with this miniaturized system was demonstrated.},
  language  = {en}
}
@article{SrivastavaSinghAggarwaletal.2010,
  author    = {Srivastava, Alok and Singh, Virendra and Aggarwal, Pranav and Schneeweiss, F. and Scherer, Ulrich W. and Friedrich, W.},
  title     = {Optical studies of insulating polymers for radiation dose monitoring},
  series = {Indian Journal of Pure and Applied Physics},
  volume    = {48},
  journal   = {Indian Journal of Pure and Applied Physics},
  number    = {11},
  publisher = {Council Of Scientific And Industrial Research (CSIR), National Institute Of Science Communication and Policy Research (NIScPR)},
  address   = {New Delhi},
  isbn      = {0019-5596},
  pages     = {782 -- 786},
  year      = {2010},
  abstract  = {The optical study carried out on insulating polymers namely polyethyleneterephthalate (PET) and polyvinylchloride (PVC) has been described. The polymers are exposed to different radiation doses by exposing them to swift heavy ions of carbon (90 MeV), silicon (120 MeV) and nickel (100 MeV) which influence on their optical properties. The studies show that amongst the investigated polymers, PVC and PET have potential for application as dosimeter beyond a threshold dose which is strongly dependent on the nature of the material and the radiation type. The optical micrographs show a distinct change in colour of the sample with increase in radiation dose.},
  language  = {en}
}
@article{AbouzarPedrazaSchoeningetal.2010,
  author    = {Abouzar, Maryam H. and Pedraza, A. M. and Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Label-free DNA hybridization and denaturation detection by means of field-effect nanoplate SOI capacitors functionalized with gold nanoparticles},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.259},
  pages     = {918 -- 921},
  year      = {2010},
  abstract  = {A new approach for a label-free electrical detection of DNA hybridization and denaturation using an array of individually addressable field-effect nanoplate SOI (silicon-on-insulator) capacitors functionalized with gold nanoparticles is presented. By using a constant-capacitance measuring setup in a differential mode, signal changes of ∼110 mV and ∼70 mV have been registered after the DNA hybridization and denaturation events, respectively.},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5 B},
  journal   = {Physics Procedia},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2010.08.082},
  pages     = {543 -- 549},
  year      = {2010},
  abstract  = {Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.},
  language  = {en}
}
@article{BohrnStuetzFleischeretal.2010,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef},
  title     = {Real-time detection of CO by eukaryotic cells},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  pages     = {17 -- 20},
  year      = {2010},
  abstract  = {In this contribution, we focus on the detection of toxic gases with living eukaryotic cells. A cell-based gas sensor system, able to measure the effects of direct exposure of gases to cells in real-time, was set up. Impedance data as well as oxygen consumption of Chinese hamster lung fibroblast cells (V79) were analysed upon exposure to carbon monoxide (CO). The CO (diluted in wet synthetic air) affects the cell respiration as indicated by an attenuated respiration signal after the CO exposure as well as an instant increase of the capacitive part of the impedance signal during the gas exposure.},
  language  = {en}
}
@inproceedings{BragardSoltauDeDonckeretal.2010,
  author    = {Bragard, Michael and Soltau, N. and De Doncker, R. W. and Schmiegel, A.},
  title     = {Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618220},
  pages     = {2944 -- 2949},
  year      = {2010},
  language  = {en}
}
@incollection{Schermutzki2010,
  author    = {Schermutzki, Margret},
  title     = {In Modulen lehren, lernen und pr{\"u}fen},
  series = {In Modulen lehren, lernen und pr{\"u}fen. Herausforderungen an die Hochschuldidaktik},
  booktitle = {In Modulen lehren, lernen und pr{\"u}fen. Herausforderungen an die Hochschuldidaktik},
  editor    = {Terbuyken, Gregor},
  publisher = {Evangelische Akademie Loccum},
  address   = {Rehburg-Loccum},
  isbn      = {978-3-8172-7809-1},
  pages     = {81 -- 106},
  year      = {2010},
  language  = {de}
}
@misc{FrauenrathRenzRiegeretal.2010,
  author    = {Frauenrath, Tobias and Renz, Wolfgang and Rieger, Jan and G{\"o}mmel, Andreas and Butenweg, Christoph and Niendorf, Thoralf},
  title     = {High Spatial Resolution 3D MRI of the Larynx Using a Dedicated TX/RX Phased Array Coil at 7.0T},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {MRI holds great potential for elucidating laryngeal and vocal fold anatomy together with the assessment of physiological processes associated in human phonation. However, MRI of human phonation remains very challenging due to the small size of the targeted structures, interfering signal from fat, air between the vocal folds and surrounding muscles and physiological motion. These anatomical/physiological constraints translate into stringent technical requirements in balancing, scan time, image contrast, immunity to physiological motion, temporal resolution and spatial resolution. Motivated by these challenges and limitations this study is aiming at translating the sensitivity gain at ultra-high magnetic fields for enhanced high spatial resolution 3D imaging of the larynx and vocal tract. To approach this goal a dedicated two channel TX/RX larynx coil is being proposed.},
  language  = {en}
}
@article{Esch2010,
  author    = {Esch, Thomas},
  title     = {Trends in commercial vehicle powertrains},
  series = {ATZautotechnology},
  volume    = {2010},
  journal   = {ATZautotechnology},
  number    = {10},
  publisher = {Vieweg \& Sohn},
  address   = {Wiesbaden},
  issn      = {2192-886X},
  doi       = {10.1007/BF03247185},
  pages     = {26 -- 31},
  year      = {2010},
  abstract  = {Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.},
  language  = {en}
}
@techreport{EschFunkeRoosen2010,
  author    = {Esch, Thomas and Funke, Harald and Roosen, Petra},
  title     = {SIoBiA - Safety Implications of Biofuels in Aviation},
  publisher = {EASA},
  address   = {K{\"o}ln},
  pages     = {279 Seiten},
  year      = {2010},
  abstract  = {Biofuels potentially interesting also for aviation purposes are predominantly liquid fuels produced from biomass. The most common biofuels today are biodiesel and bioethanol. Since diesel engines are rather rare in aviation this survey is focusing on ethanol admixed to gasoline products. The Directive 2003/30/EC of the European Parliament and the Council of May 8th 2003 on the promotion of the use of biofuels or other renewable fuels for transport encourage a growing admixture of biogenic fuel components to fossil automotive gasoline. Some aircraft models equipped with spark ignited piston engines are approved for operation with automotive gasoline, frequently called "MOGAS" (motor gasoline). The majority of those approvals is limited to MOGAS compositions that do not contain methanol or ethanol beyond negligible amounts. In the past years (bio-)MTBE or (bio-)ETBE have been widely used as blending component of automotive gasoline whilst the usage of low-molecular alcohols like methanol or ethanol has been avoided due to the handling problems especially with regard to the strong affinity for water. With rising mandatory bio-admixtures the conversion of the basic biogenic ethanol to ETBE, causing a reduction of energetic payoff, becomes more and more unattractive. Therefore the direct ethanol admixture is accordingly favoured. Due to the national enforcements of the directive 2003/30/EC more oxygenates produced from organic materials like bioethanol have started to appear in automotive gasolines already. The current fuel specification EN 228 already allows up to 3 \% volume per volume (v/v) (bio-)methanol or up to 5 \% v/v (bio-)ethanol as fuel components. This is also roughly the amount of biogenic components to comply with the legal requirements to avoid monetary penalties for producers and distributors of fuels. Since automotive fuel is cheaper than the common aviation gasoline (AVGAS), creates less problems with lead deposits in the engine, and in general produces less pollutants it is strongly favoured by pilots. But being designed for a different set of usage scenarios the use of automotive fuel with low molecular alcohols for aircraft operation may have adverse effects in aviation operation. Increasing amounts of ethanol admixtures impose various changes in the gasoline's chemical and physical properties, some of them rather unexpected and not within the range of flight experiences even of long-term pilots.},
  language  = {en}
}
@article{RieplPettrakFaulstichetal.2010,
  author    = {Riepl, Herbert Matthias and Pettrak, J{\"u}rgen and Faulstich, Martin and Herrmann, Wolfgang Anton},
  title     = {Self metathesis of fatty alcohols and amines to provide monomers for polyester and polyamide products},
  series = {Macromolecular Symposia},
  volume    = {293},
  journal   = {Macromolecular Symposia},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-3900 (eISSN)},
  doi       = {10.1002/masy.200900041},
  pages     = {39 -- 42},
  year      = {2010},
  abstract  = {Self metathesis of oleochemicals offers a variety of bifunctional compounds, that can be used as monomer for polymer production. Many precursors are in huge scales available, like oleic acid ester (biodiesel), oleyl alcohol (tensides), oleyl amines (tensides, lubricants). We show several ways to produce and separate and purify C18-α,ω-bifunctional compounds, using Grubbs 2nd Generation catalysts, starting from technical grade educts.},
  language  = {en}
}
@phdthesis{Pettrak2010,
  author    = {Pettrak, J{\"u}rgen},
  title     = {Nutzung nachwachsender Rohstoffe bei der Herstellung thermoplastischer Elastomere aus Folgeprodukten der Olefinmetathese},
  publisher = {Technische Universit{\"a}t M{\"u}nchen},
  address   = {M{\"u}nchen},
  pages     = {137 Seiten},
  year      = {2010},
  abstract  = {Metathese von {\"O}ls{\"a}ure und Derivaten ist ein interessanter Weg f{\"u}r die Synthese bifunktioneller Verbindungen aus nachwachsenden Rohstoffen. Verwendet wurden Ru-Katalysatoren der zweiten Generation, welche eine hohe Toleranz gegen{\"u}ber funktionellen Gruppen und Verunreinigungen aufweisen. Trotz des Einsatzes technischer Edukte waren Umsetzungen mit niedrigen Katalysatormengen (0.001 - 0.01 mol-\%) m{\"o}glich, mit Ausbeuten entsprechend der Literatur. Kreuzmetathesen erm{\"o}glichten variable Kettenl{\"a}ngen und Funktionalit{\"a}ten der Monomere, die Produktgewinnung ist jedoch aufw{\"a}ndig. Selbstmetathese lieferte C18-bifunktionelle Verbindungen, welche einfach durch Destillation oder Kristallisation isoliert werden k{\"o}nnen. Neben der katalystischen Umsetzung wurde auch die Produktgewinnung untersucht und f{\"u}r ausgew{\"a}hlte Produkte auch im gr{\"o}ßeren Maßstab durchgef{\"u}hrt.},
  language  = {de}
}
@article{BarbazanHagenbachPaulssenetal.2010,
  author    = {Barbaz{\´a}n, Paula and Hagenbach, Adelheid and Paulßen, Elisabeth and Abram, Ulrich and Carballo, Rosa and Rodriguez-Hermida, Sabina and V{\´a}zquez-L{\´o}pez, Ezequiel M.},
  title     = {Tricarbonyl Rhenium(I) and Technetium(I) Complexes with Hydrazones Derived from 4,5-Diazafluoren-9-one and 1,10-Phenanthroline-5,6-dione},
  series = {European Journal of Inorganic Chemistry},
  journal   = {European Journal of Inorganic Chemistry},
  number    = {29},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1099-0682},
  doi       = {10.1002/ejic.201000522},
  pages     = {4622 -- 4630},
  year      = {2010},
  abstract  = {Tricarbonylrhenium(I) and -technetium(I) halide (halide = Cl and Br) complexes of ligands derived from 4,5-diazafluoren-9-one (df) and 1,10-phenanthroline-5,6-dione (phen) derivatives of benzoic and 2-hydroxybenzoic acid hydrazides have been prepared. The complexes have been characterized by elemental analysis, MS, IR, 1H NMR and absorption and emission UV/Vis spectroscopic methods. The metal centres (ReI and TcI) are coordinated through the nitrogen imine atoms and establish five-membered chelate rings, whereas the hydrazone groups stand uncoordinated. The 1H NMR spectra suggest the same behaviour in solution on the basis of only marginal variations in the chemical shifts of the hydrazine protons.},
  language  = {en}
}
@article{UlberPothMonzonetal.2010,
  author    = {Ulber, Roland and Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils},
  title     = {Prozessintegration von Hydrolyse und Fermentation von Cellulose- Faserstoff},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.200900103},
  pages     = {135 -- 139},
  year      = {2010},
  abstract  = {Ein viel versprechender erneuerbarer Rohstoff f{\"u}r die Produktion von Chemikalien und Treibstoffen ist Lignocellulose aus pflanzlicher Biomasse. Die darin enthaltenen Zucker k{\"o}nnen mittels enzymatischer Hydrolyse freigesetzt und fermentativ zu Ethanol umgesetzt werden. Ein interessanter Ansatz ist dabei die simultane Verzuckerung und Fermentation. Hefen und Enzyme haben mit 30 °C bzw. 50 °C zwar unterschiedliche Temperaturoptima, es konnte aber gezeigt werden, dass auch bei den niedrigeren Temperaturen eine Umsetzung der Cellulose zu Glucose erfolgt, wenn auch langsamer als bei optimalen Bedingungen. Außerdem konnte in Vorversuchen gezeigt werden, dass Ethanol in den zu erwartenden Konzentrationen keinen Einfluss auf die enzymatische Umsetzung hat.},
  language  = {de}
}
@article{SiekerNeunerDimitrovaetal.2010,
  author    = {Sieker, Tim and Neuner, Andreas and Dimitrova, Darina and Tippk{\"o}tter, Nils and Bart, Hans-J{\"o}rg and Heinzle, Elmar and Ulber, Roland},
  title     = {Grassilage als Rohstoff f{\"u}r die chemische Industrie},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.201000088},
  pages     = {1153 -- 1159},
  year      = {2010},
  abstract  = {Grassilage stellt einen nachwachsenden Rohstoff mit großem Potenzial dar. Neben Cellulose und Hemicellulose enth{\"a}lt sie auch organische S{\"a}uren, insbesondere Milchs{\"a}ure. In einem Bioraffinerie-Projekt wird die Milchs{\"a}ure aus der Silage isoliert und mit gentechnisch optimierten St{\"a}mmen zu L-Lysin weiterverarbeitet. Die Lignocellulose wird hydrolysiert und zu Ethanol fermentiert. Ein besonderes Augenmerk liegt auf der Integration der unterschiedlichen Prozesse sowie der einzelnen Prozessschritte zu einem Gesamtprozess, der s{\"a}mtliche Inhaltsstoffe der Silage verwertet.},
  language  = {de}
}
@article{BenzelLinzbach2010,
  author    = {Benzel, Ute and Linzbach, Meike},
  title     = {Bilanzierung und Offenlegung von Ertragsteuerrisiken - Quo vadis? Unsichere Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB},
  series = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  journal   = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  number    = {11},
  issn      = {1862-5533},
  pages     = {475 -- 523},
  year      = {2010},
  abstract  = {In den letzten drei bis vier Jahren unterlag der Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen im IFRS- und US-GAAP-Abschluss einem stetigen Wandel. Sowohl nach US-GAAP als auch nach IFRS nehmen die Anforderungen an die Bilanzierung und Offenlegung best{\"a}ndig zu. Schon allein dies zeigt die Bedeutung, die dem Themenbereich der Steuerrisiken beigemessen wird. Aber nicht nur im Rahmen der Berichterstattung im Jahresabschluss stehen Steuerrisiken oben auf der Agenda, auch der amerikanische Internal Revenue Service (IRS) verfolgt das Thema sehr konsequent und plant, bestimmte Unternehmen zu Angaben von Steuerrisiken im Rahmen der Steuererkl{\"a}rungen zu verpflichten. Der Aufsatz befasst sich mit den neueren Entwicklungen im Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB und der Offenlegung von Steuerrisiken im Rahmen der Steuererkl{\"a}rung.},
  language  = {de}
}
@article{FleischhakerEversDey2010,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg and Dey, Tarak N.},
  title     = {Phase modulation induced by cooperative effects in electromagnetically induced transparency},
  series = {Physical Review A - Atomic, molecular, and optical physics},
  volume    = {82},
  journal   = {Physical Review A - Atomic, molecular, and optical physics},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1050-2947},
  doi       = {10.1103/PhysRevA.82.013815},
  pages     = {013815},
  year      = {2010},
  abstract  = {We analyze the influence of dipole-dipole interactions in an electromagnetically induced transparency set up for a density at the onset of cooperative effects. To this end, we include mean-field models for the influence of local-field corrections and radiation trapping into our calculation. We show both analytically and numerically that the polarization contribution to the local field strongly modulates the phase of a weak pulse. We give an intuitive explanation for this local-field-induced phase modulation and demonstrate that it distinctively differs from the nonlinear self-phase-modulation that a strong pulse experiences in a Kerr medium.},
  language  = {en}
}
@misc{Digel2010,
  author    = {Digel, Ilya},
  title     = {In-situ biological decontamination of an ice melting probe},
  year      = {2010},
  language  = {en}
}
@article{KozhalakovaZhubanovaMansurovetal.2010,
  author    = {Kozhalakova, A. A. and Zhubanova, Azhar A. and Mansurov, Z. A. and Digel, Ilya and Tazhibayeva, S. M. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice shell},
  series = {Science of Central Asia},
  journal   = {Science of Central Asia},
  pages     = {50 -- 54},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI},
  volume    = {24},
  journal   = {K{\"u}nstliche Intelligenz : KI},
  number    = {2},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-010-0041-3},
  pages     = {175 -- 178},
  year      = {2010},
  abstract  = {In this extended abstract we describe the robot programming and planning language READYLOG, a GOLOG dialect which was developed to support the decision making of robots acting in dynamic real-time domains like robotic soccer. The formal framework of READYLOG, which is based on the situation calculus, features imperative control structures like loops and procedures, allows for decision-theoretic planning, and accounts for a continuously changing world. We developed high-level controllers in READYLOG for our soccer robots in RoboCup's Middle-size league, but also for service robots and for autonomous agents in interactive computer games.},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {golog.lua: Towards a Non-Prolog Implementation of Golog for Embedded Systems},
  publisher = {AAAI},
  address   = {Menlo Park},
  pages     = {20 -- 28},
  year      = {2010},
  language  = {en}
}
@inproceedings{AbelBoninAlbrachtetal.2010,
  author    = {Abel, Thomas and Bonin, Dominik and Albracht, Kirsten and Zeller, Sebastian and Br{\"u}ggemann, Gert-Peter and Burkett, Brendan and Str{\"u}der, Heiko K.},
  title     = {Kinematic profile of the elite handcyclist},
  series = {28th International Conference on Biomechanics in Sports, Marquette, Michigan, USA, July 19 - 23, 2010},
  booktitle = {28th International Conference on Biomechanics in Sports, Marquette, Michigan, USA, July 19 - 23, 2010},
  issn      = {1999-4168},
  pages     = {140 -- 141},
  year      = {2010},
  language  = {en}
}
@inproceedings{BegingPoghossianMlyneketal.2010,
  author    = {Beging, Stefan and Poghossian, Arshak and Mlynek, D. and Hataihimakul, S. and Pedraza, A. and Dhawan, S. and Laube, N. and Kleinen, Lisa and Baldsiefen, Gerhard and Busch, Heinrich von and Sch{\"o}ning, Michael Josef},
  title     = {Ion-selective sensors for the determination of the risk of urinary stone formation},
  series = {Micro- and Nanosystems in biochemical diagnosis : Principles and applications},
  booktitle = {Micro- and Nanosystems in biochemical diagnosis : Principles and applications},
  address   = {Warsaw},
  pages     = {74 -- 80},
  year      = {2010},
  language  = {en}
}
@article{LeimenaArtmannDachwaldetal.2010,
  author    = {Leimena, W. and Artmann, Gerhard and Dachwald, Bernd and Temiz Artmann, Ayseg{\"u}l and Gossmann, Matthias and Digel, Ilya},
  title     = {Feasibility of an in-situ microbial decontamination of an ice-melting probe},
  series = {Eurasian Chemico-Technological Journal},
  volume    = {12},
  journal   = {Eurasian Chemico-Technological Journal},
  number    = {2},
  publisher = {Institute of Combustion Problems},
  address   = {Almaty},
  isbn      = {1562-3920},
  doi       = {10.18321/ectj37},
  pages     = {145 -- 150},
  year      = {2010},
  abstract  = {Autonomous robotic systems for penetrating thick ice shells with simultaneous collecting of scientific data are very promising devices in both terrestrial (glacier, climate research) and extra-terrestrial applications. Technical challenges in development of such systems are numerous and include 3D-navigation, an appropriate energy source, motion control, etc. Not less important is the problem of forward contamination of the pristine glacial environments with microorganisms and biomolecules from the surface of the probe. This study was devoted to establishing a laboratory model for microbial contamination of a newly constructed ice-melting probe called IceMole and to analyse the viability and amount of the contaminating microorganisms as a function of distance. The used bacterial strains were Bacillus subtilis (ATCC 6051) and Escherichia coli (ATCC 11775). The main objective was development of an efficient and reliable in-situ decontamination method of the melting probe. Therefore, several chemical substances were tested in respect of their efficacy to eliminate bacteria on the surface of the melting probe at low temperature (0 - 5 °C) and at continuous dilution by melted water. Our study has shown that at least 99.9\% decontamination of the IceMole can be successfully achieved by the injection of 30\% (v/v) hydrogen peroxide and 3\% (v/v) sodium hypochlorite into the drilling site. We were able to reproduce this result in both time-dependent and depth-dependent experiments. The sufficient amount of 30\% (v/v) H₂O₂ or 3\% (v/v) NaClO has been found to be approximately 18 L per cm² of the probe's surface.},
  language  = {en}
}
@article{FerreinSiebelSteinbauer2010,
  author    = {Ferrein, Alexander and Siebel, Nils T. and Steinbauer, Gerald},
  title     = {Hybrid control for autonomous systems — Integrating learning, deliberation and reactive control},
  series = {Robotics and Autonomous Systems},
  volume    = {58},
  journal   = {Robotics and Autonomous Systems},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0921-8890},
  doi       = {10.1016/j.robot.2010.06.003},
  pages     = {1037 -- 1038},
  year      = {2010},
  language  = {en}
}
@misc{DieringerRenzLindeletal.2010,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz Dawid and Seifert, Frank and Frauenrath, Tobias and Waiczies, Helmar and von Knobelsdorff-Brenkhoff, Florian and Santoro, Davide and Hoffmann, Werner and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {4CH TX/RX Surface Coil for 7T: Design, Optimization and Application for Cardiac Function Imaging},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {Practical impediments of ultra high field cardiovascular MR (CVMR) can be catalogued in exacerbated magnetic field and radio frequency (RF) inhomogeneities, susceptibility and off-resonance effects, conductive and dielectric effects in tissue, and RF power deposition constraints, which all bear the potential to spoil the benefit of CVMR at 7T. Therefore, a four element cardiac transceive surface coil array was developed. Cardiac imaging provided clinically acceptable signal homogeneity with an excellent blood myocardium contrast. Subtle anatomic structures, such as pericardium, mitral and tricuspid valves and their apparatus, papillary muscles, and trabecles were accurately delineated.},
  language  = {en}
}
@misc{FrauenrathBeckerHezeletal.2010,
  author    = {Frauenrath, Tobias and Becker, Meike and Hezel, Fabian and Krombach, Gabriele A. and Kremer, Ute and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Comparison of Left Function Assessment Using Phonocardiogram and Electrocardiogram Triggered 2D SSFP CINE MR Imaging at 1.5 T and 3.0 T},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {As high-field cardiac MRI (CMR) becomes more widespread the propensity of ECG to distortions and mistriggering increases and with it the motivation for a cardiac triggering alternative. Hence, this study explores the suitability of acoustic cardiac triggering (ACT) for left ventricular (LV) function assessment in healthy subjects at 1.5T and 3.0T.},
  language  = {en}
}
@misc{HezelFrauenrathRenzetal.2010,
  author    = {Hezel, Fabian and Frauenrath, Tobias and Renz, Wolfgang and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Feasibility of CINE Myocardial T2* Mapping Using Susceptibility Weighted Gradient-Echo Imaging at 7.0 T},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {This study is designed to demonstrate the promise of susceptibility weighted 2D CINE FLASH and T2* Mapping of the heart at 7T.},
  language  = {en}
}
@misc{PasteurLudwigTippkoetteretal.2010,
  author    = {Pasteur, A. and Ludwig, B. and Tippk{\"o}tter, Nils and Diller, R. and Kampeis, P. and Ulber, Roland},
  title     = {Aufarbeitung von β-Lactamantibiotika mittels selektiver, magnetischer Adsorbermaterialien},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201050270},
  pages     = {1587},
  year      = {2010},
  abstract  = {b-Lactame geh{\"o}ren zu den wirkungsvollsten Antibiotika, jedoch lassen sich viele nur schwierig fermentativ erzeugen. Ein Problem bei der fermentativen Produktion ist die Hydrolyse des Lactamrings im w{\"a}ssrigen Milieu. Das Ziel des von der DBU gef{\"o}rderten Projekts ist die selektive In-situ-Adsorption der b-Lactamantibiotika unter anschließender magnetischer Separation. Durch die Isolation im Hochgradientenmagnetseparator (HGMS) ist eine Fest-fest-fl{\"u}ssig-Trennung und somit ein erheblicher Zeitgewinn im Downstreamprozess m{\"o}glich. Zus{\"a}tzlich kommt es zur Einsparung an L{\"o}sungsmittel und Energie, was neben Reduzierung der Antibiotikahydrolyse auch in {\"o}kologischer Hinsicht einen interessanten Aspekt darstellt. Als Tr{\"a}germaterial f{\"u}r die Adsorbermatrix werden magnetisierbare Eisenoxidpartikel eingesetzt, die in einer Silikamatrix eingebettet sind. Diese Adsorber sollen auf Selektivit{\"a}t in Wasser und verschiedenen Medien getestet werden. Zus{\"a}tzlich werden die Abbauprodukte des b-Lactams analysiert, um eine Aussage {\"u}ber die Stabilisierung des Antibiotikums durch die selektiven Adsorber treffen zu k{\"o}nnen. Diese Ergebnisse werden mit kommerziell erh{\"a}ltlichen Adsorbern verglichen. Die Aufreinigung der Antibiotika soll direkt aus der Fermentationsbr{\"u}he erfolgen. Um die Trennung der magnetischen, selektiven Adsorber von der Biomasse zu gew{\"a}hrleisten, soll der HGMS in die Fermentation integriert werden. Das filament{\"o}se Wachstum des Mikroorganismus erfordert eine Neuauslegung der Filtermatrix.},
  language  = {de}
}
@misc{TippkoetterZhangPothetal.2010,
  author    = {Tippk{\"o}tter, Nils and Zhang, M. and Poth, S. and Ulber, Roland},
  title     = {Enzymatische Lignindegradierung unter Einsatz eines Optimierungsalgorithmus},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050707},
  pages     = {1601 -- 1602},
  year      = {2010},
  abstract  = {Lignine bestehen aus einem hochgradig vernetzten Polymer phenolischer Grundeinheiten. Diese Verbindungen sind eine Quelle vielversprechender chemischer Grundbausteine. Auch die enzymatische Modifikation der Materialeigenschaften des Lignins ist f{\"u}r dessen Anwendung von Interesse. Aufgrund der verschiedenen Bindungstypen im Lignin ist eine Auftrennung mit nur einem Enzym unwahrscheinlich. Vielmehr sind verschiedene mediatorgest{\"u}tzte Reaktionen notwendig. Pilze, wie z.B. T. versicolor, nutzen Enzymkombinationen zum Aufschluss des Lignins. Hierbei kommen Laccase, Ligninperoxidase und Manganperoxidase zum Einsatz. Die optimale Kombination der Enzyme und ihrer Mediatoren bzw. Stabilisatoren ist Ziel der Untersuchungen. Aufgrund der großen Parameteranzahl wurde ein genetischer Algorithmus eingesetzt. Als Versuchsparameter wurden gew{\"a}hlt: die Verh{\"a}ltnisse der Enzyme, Ligninmasse, Konzentrationen an Eisen-, Mangan-, Oxalat-Ionen, ABTS, Violurs{\"a}ure und H₂O₂. Somit werden elf Parameter simultan optimiert. Als Algorithmus wurde ein Programm mit variabler Genkodierung entwickelt. Die Umsetzung des Lignins wird dabei {\"u}ber den verfolgt. Zurzeit ist ein enzymatischer Umsatz von 12\% m{\"o}glich. Als Referenz wurde eine chemische Lignindegradierung mit einem Umsatzvon 37\% etabliert. Die sechs Generationen des Algorithmus zeigen eine Kongruenz der Enzymkonzentrationen von LiP, MnP und VeP, w{\"a}hrend Laccase keinen Einfluss hat. Des Weiteren beeinflussen die Konzentrationen von Mangan und Oxalat die Umsetzung, w{\"a}hrend die Variation von ABTS- und H₂O₂ nur eine geringe Auswirkung hat.},
  language  = {de}
}
@misc{ThielTippkoetterSucketal.2010,
  author    = {Thiel, A. and Tippk{\"o}tter, Nils and Suck, K. and Sohling, U. and Ruf, F. and Ulber, Roland},
  title     = {Simulation und Experiment bei der Aufarbeitung von Polyphenolen durch neue Silicatmaterialien},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050104},
  pages     = {1589},
  year      = {2010},
  abstract  = {Nachwachsende Rohstoffe stellen eine reichhaltige Quelle f{\"u}r die Gewinnung von wirtschaftlich interessanten Biomolek{\"u}len dar. Die Gruppe der Polyphenole ist dabei f{\"u}r mehrere Industriezweige bedeutend. Ihre antioxidativen Eigenschaften sind z. B. f{\"u}r die Pharmaindustrie interessant. Im derzeit bearbeiteten Projekt sollen Polyphenole aus Pflanzenbestandteilen isoliert und aufgereinigt werden, um sie dann als Komponenten f{\"u}r eine Vernetzung von Polymeren auf der Basis von Fetts{\"a}uren einzusetzen. Bisher sind im Wesentlichen Prozesse zur Entfernung von Polyphenolen aus Getr{\"a}nken wie Bier und Wein bekannt. Eine Wiedergewinnung der Polyphenole war in diesen Anwendungen bisher nicht relevant. Die Gewinnung bzw. Abtrennung der Polyphenole erfolgt u. a. durch kommerziell erh{\"a}ltliche Adsorbentien wie PVPP, Adsorberharze XAD16 (Rh{\"o}m \& Haas) oder SP70 (Sepabeads), deren Partikelgr{\"o}ßen im Bereichvon 0,1 ± 0,8 mm und spezifischen Oberfl{\"a}chen von 700 ± 900 m 2 /g liegen. Als Alternative zu diesen Adsorbern sollen neue Materialien auf Basis von anorganischen Trennmedien, wie z. B. nat{\"u}rlichen Tonmineralien, f{\"u}r die Polyphenolabtrennung verwendet werden. Derzeit wird durch Abgleich von Experiment und Simulation ein Materialscreening durchgef{\"u}hrt. Durch den Einsatz molekulardynamischer Bindungssimulationen wird die Adsorbersuche beschleunigt und Vorhersagen zu Modifikationen bei der Herstellung der neuen Adsorbentien erm{\"o}glicht.},
  language  = {de}
}
@article{vonKnobelsdorfBrenkenhoffFrauenrathProthmannetal.2010,
  author    = {von Knobelsdorf-Brenkenhoff, Florian and Frauenrath, Tobias and Prothmann, Marcel and Dieringer, Matthias A. and Hezel, Fabian and Renz, Wolfgang and Kretschel, Kerstin and Niendorf, Thoralf and Schulz-Menger, Jeanette},
  title     = {Cardiac chamber quantification using magnetic resonance imaging at 7 Tesla—a pilot study},
  volume    = {20},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {0938-7994},
  doi       = {10.1007/s00330-010-1888-2},
  pages     = {2844 -- 2852},
  year      = {2010},
  abstract  = {Objectives Interest in cardiovascular magnetic resonance (CMR) at 7 T is motivated by the expected increase in spatial and temporal resolution, but the method is technically challenging. We examined the feasibility of cardiac chamber quantification at 7 T. Methods A stack of short axes covering the left ventricle was obtained in nine healthy male volunteers. At 1.5 T, steady-state free precession (SSFP) and fast gradient echo (FGRE) cine imaging with 7 mm slice thickness (STH) were used. At 7 T, FGRE with 7 mm and 4 mm STH were applied. End-diastolic volume, end-systolic volume, ejection fraction and mass were calculated. Results All 7 T examinations provided excellent blood/myocardium contrast for all slice directions. No significant difference was found regarding ejection fraction and cardiac volumes between SSFP at 1.5 T and FGRE at 7 T, while volumes obtained from FGRE at 1.5 T were underestimated. Cardiac mass derived from FGRE at 1.5 and 7 T was larger than obtained from SSFP at 1.5 T. Agreement of volumes and mass between SSFP at 1.5 T and FGRE improved for FGRE at 7 T when combined with an STH reduction to 4 mm. Conclusions This pilot study demonstrates that cardiac chamber quantification at 7 T using FGRE is feasible and agrees closely with SSFP at 1.5 T.},
  language  = {en}
}
@misc{PothMonzonTippkoetteretal.2010,
  author    = {Poth, S. and Monzon, M. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulose-Bioraffinerie: Simultane Verzuckerung und Fermentation},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201050360},
  pages     = {1568},
  year      = {2010},
  abstract  = {Die am h{\"a}ufigsten genutzten Rohstoffe f{\"u}r die Produktion von Treibstoffen und Chemikalien sind fossilen Ursprungs. Da diese limitiert sind, werden im Hinblick auf die Nachhaltigkeit alternative, erneuerbare Rohstoffquellen intensiv untersucht. Vielversprechend in diesem Kontext sind die in Lignocellulose enthaltenen Zucker, die beispielsweise zur Produktion von Ethanol genutzt werden k{\"o}nnen. In der Regel sind f{\"u}r eine Lig-nocellulose-Bioraffinerie mehrere Prozessschritte notwendig: Vorbehandlung, Verzuckerung und Fermentation. Um diesen Prozess einfacher zu gestalten, ist es m{\"o}glich, die Verzuckerung und die Fermentation in einem Schritt durchzuf{\"u}hren (SSF). Als Substrat wird hier Cellulose-Faserstoff verwendet, der durch das Organosolv-Verfahren aufgeschlossen wurde. Die Hydrolyse erfolgt mit kommerziell erh{\"a}ltlichen Enzymen und f{\"u}r die Fermentation zu Ethanol werden zwei Hefen verwendet. Beim SSF-Verfahren konnte, im Vergleich zur entkoppelten Verfahrensweise, trotz bestehender Unterschiede in den Temperatur-Optima von Enzymen und Hefen eine Steigerung in der Ethanol-Ausbeute von 0,15 auf 0,2 gg⁻¹ beobachtet werden. Um wirtschaftliche Ausbeuten und Konzentrationen des Produkts erzielen zu k{\"o}nnen, ist es notwendig den Prozess weiter zu optimieren. Im Einzelfall muss {\"u}berpr{\"u}ft werden, ob diese Verfahrensweise auch f{\"u}r die Produktion anderer interessanter Stoffe (wie Itacons{\"a}ure, Bernsteins{\"a}ure) geeignet ist.},
  language  = {de}
}
@misc{StaubTippkoetterSucketal.2010,
  author    = {Staub, C. and Tippk{\"o}tter, Nils and Suck, K. and Sohling, U. and Ulber, Roland},
  title     = {Chromatographische Aufarbeitung von Molkekonzentrat mittels mineralischer Granulate},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050322},
  pages     = {1588 -- 1589},
  year      = {2010},
  abstract  = {Molke f{\"a}llt im Rahmen der K{\"a}seherstellung allein in Deutschland in Mengen von {\"u}ber 11 Mio. Tonnen j{\"a}hrlich an. Dieses Nebenprodukt wurde trotz seines Reichtums an Milchzucker und Proteinen lange Zeit kaum industriell weiterverarbeitet und stellte ein bedeutendes Problem bei der Abwasserreinigung dar. Derzeit kommen meist kosten- und reinigungsintensive Membranfiltrationsverfahren bei der Auftrennung von Molke in ihre Hauptkomponenten Lactose und Molkenprotein zum Einsatz. Die Produkte finden vorwiegend in der Nahrungsmittelindustrie Anwendung als S{\"u}ßungsmittel, Proteinzusatz oder Texturbildner. Die Mehrheit des Proteins wird dabei als Konzentrat bzw. Proteinpulver verarbeitet. Wegen der antibakteriellen, antiviralen und weiteren wertvollen physiologischen Eigenschaften der Molkeproteine stellt eine weitere Aufreinigung der einzelnen Molkeproteine f{\"u}r die pharmazeutische Industrie einen naheliegenden zus{\"a}tzlichen Wertsch{\"o}pfungsschritt dar. In Kooperation mit der S{\"u}d Chemie AG wurde damit begonnen, ein Verfahren zu entwickeln, das kosteng{\"u}nstige mineralische Adsorbentien verwendet. Bisher konnte die Abtrennung von Lactose von den Molkenproteinen aus verd{\"u}nntem Molkekonzentrat in einem Verfahrensschritt ohne Vorbehandlung des Rohstoffs erfolgreich realisiert werden. Aktuelle Arbeiten besch{\"a}ftigen sich mit der Verbesserung der Proteinbindekapazit{\"a}tund chromatographischen Proteinauftrennung sowie dem Upscaling zum direkten Einsatz von Molkekonzentrat ohne Vorverd{\"u}nnung.},
  language  = {de}
}
@article{FrauenrathHezelRenzetal.2010,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Renz, Wolfgang and de Geyer d'Orth, Thibaut and Dieringer, Matthias and von Knobelsdorf-Brenkenhoff, Florian and Prothmann, Marcel and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Acoustic cardiac triggering: a practical solution for synchronization and gating of cardiovascular magnetic resonance at 7 Tesla},
  series = {Journal of Cardiovascular Magnetic Resonance},
  volume    = {12},
  journal   = {Journal of Cardiovascular Magnetic Resonance},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1532-429X},
  doi       = {10.1186/1532-429X-12-67},
  year      = {2010},
  abstract  = {Background To demonstrate the applicability of acoustic cardiac triggering (ACT) for imaging of the heart at ultrahigh magnetic fields (7.0 T) by comparing phonocardiogram, conventional vector electrocardiogram (ECG) and traditional pulse oximetry (POX) triggered 2D CINE acquisitions together with (i) a qualitative image quality analysis, (ii) an assessment of the left ventricular function parameter and (iii) an examination of trigger reliability and trigger detection variance derived from the signal waveforms. Results ECG was susceptible to severe distortions at 7.0 T. POX and ACT provided waveforms free of interferences from electromagnetic fields or from magneto-hydrodynamic effects. Frequent R-wave mis-registration occurred in ECG-triggered acquisitions with a failure rate of up to 30\% resulting in cardiac motion induced artifacts. ACT and POX triggering produced images free of cardiac motion artefacts. ECG showed a severe jitter in the R-wave detection. POX also showed a trigger jitter of approximately Δt = 72 ms which is equivalent to two cardiac phases. ACT showed a jitter of approximately Δt = 5 ms only. ECG waveforms revealed a standard deviation for the cardiac trigger offset larger than that observed for ACT or POX waveforms. Image quality assessment showed that ACT substantially improved image quality as compared to ECG (image quality score at end-diastole: ECG = 1.7 ± 0.5, ACT = 2.4 ± 0.5, p = 0.04) while the comparison between ECG vs. POX gated acquisitions showed no significant differences in image quality (image quality score: ECG = 1.7 ± 0.5, POX = 2.0 ± 0.5, p = 0.34). Conclusions The applicability of acoustic triggering for cardiac CINE imaging at 7.0 T was demonstrated. ACT's trigger reliability and fidelity are superior to that of ECG and POX. ACT promises to be beneficial for cardiovascular magnetic resonance at ultra-high field strengths including 7.0 T.},
  language  = {en}
}
@misc{TippkoetterMaurerPasteuretal.2010,
  author    = {Tippk{\"o}tter, Nils and Maurer, S. and Pasteur, A. and Kampeis, P. and Ulber, Roland},
  title     = {Hochgradient-Magnetseparation von Fermentationsprodukten-FEM Simulation der Filtermatrix},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050217},
  pages     = {1361},
  year      = {2010},
  abstract  = {Durch den Einsatz magnetisierbarer Partikel lassen sich Stoffwechselprodukte direkt und selektiv aus feststoffreichen Fermentationssuspensionen abtrennen. Im Gegensatz zu klassischen Adsorbermaterialien k{\"o}nnen magnetisierbare Partikel mit sehr geringen Durchmessern verwendet werden. Zur deren Abtrennung ist jedoch ein hoher Magnetfeldgradient notwendig. Dieser wird in der Regel durch in der Trennkammer bzw. dem Magnetfeld eingebrachte magnetisierbare Dr{\"a}hte realisiert. Bei der Auslegung der Drahtgitter ist ein Kompromiss zwischen Abtrennrate und Durchl{\"a}ssigkeit n{\"o}tig. Die Ausrichtung der Dr{\"a}hte in Relation zum Magnetfeld, deren Abstand sowie die geometrische Anordnung k{\"o}nnen hierbei variiert werden. Zum Verst{\"a}ndnis der Einfl{\"u}sse auf das sich ausbildende Magnetfeld und die Fluiddynamik wurden Simulationen mit der Finite-Elemente-Methode durchgef{\"u}hrt und experimentell {\"u}berpr{\"u}ft. Hierf{\"u}r wurden die Dr{\"a}hte unter Variation von Anzahl, Richtung und Anordnung in den Hochgradient-Magnetseparator eingebracht. Erste Verifizierungen der Simulationen zeigen, dass die in Magnetfeldrichtung ausgerichteten Dr{\"a}hte (x-Achse) {\"u}ber die geringste Partikelr{\"u}ckhaltef{\"a}higkeit verf{\"u}gen. Die Dr{\"a}hte der y- und z-Achse halten den gr{\"o}ßten Anteil der Magnetpartikel zur{\"u}ck, wobei die Dr{\"a}hte in y-Richtung den h{\"o}chsten Feldgradienten ausbilden. Des Weiteren konnte gezeigt werden, dass eine rhomboedrische Drahtanordnung der kubischen vorzuziehen ist.},
  language  = {de}
}
@misc{SiekerTippkoetterUlberetal.2010,
  author    = {Sieker, T. and Tippk{\"o}tter, Nils and Ulber, Roland and Bart, Hans-J{\"o}rg and Heinzle, E.},
  title     = {Gr{\"u}ne Bioraffinerie: Ganzheitliche Nutzung von Grassilage f{\"u}r die Herstellung von Grund-und Feinchemikalien},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201050321},
  pages     = {1564},
  year      = {2010},
  abstract  = {Gras hat ein hohes Potenzial als nachwachsender Rohstoff. Bei ungeeigneter Lagerung verderben Gr{\"a}ser allerdings innerhalb weniger Tage. Dieser Nachteil kann durch die Silierung des Grasschnittes behoben werden. Eines der wichtigsten in der Silage enthaltenen Produkte ist die Milchs{\"a}ure. Um diese f{\"u}r weitere Aufarbeitungsschritte zug{\"a}nglich zu machen, wird aus der Silage ein Presssaft hergestellt. Die Milchs{\"a}ure wird aus einem Silagepresssaft mittels Extraktion durch ionische Fl{\"u}ssigkeiten isoliert. Dabei wird zum einen eine reine Milchs{\"a}ure hergestellt, die z. B. f{\"u}r die Herstellung von Polymilchs{\"a}ure genutzt werden kann. Zum anderen wird ein weniger aufgereinigter Extrakt gewonnen, der f{\"u}r die fermentative Produktion von L-Lysin und 1,2-Propandiol genutzt werden soll. Im Rahmen des Projekts erfolgt die gentechnische Optimierung von Corynebacterium glutamicum f{\"u}r die Umsetzung von Milchs{\"a}urezu L-Lysin. Die im nach der Pressung verbleibenden Presskuchen enthaltenen Grasfasern bestehen zu einem großen Teil aus Polysacchariden. Diese werden hydrolysiert und die dabei freigesetzten Zucker zu Grundchemikalien wie Ethanol oder Itakons{\"a}ure fermentiert. Im Rahmen einer vollst{\"a}ndigen Nutzung der Silage wird das Raffinat aus der Milchs{\"a}ureextraktion als Mediumsupplement in der Fermentation eingesetzt, was die Zugabe weiterer Medienbestandteile {\"u}berfl{\"u}ssig macht. Die R{\"u}ckst{\"a}nde der Hydrolysen und Fermentationen sollen dar{\"u}berhinaus f{\"u}r die Herstellung von Biogas genutzt werden.},
  language  = {de}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Behr, Marek and Tran, L. and Vonderstein, K. and Mottaghy, K.},
  title     = {Numerical Prediction of Blood Damage in Biomedical Devices},
  year      = {2010},
  language  = {en}
}
@article{Hillgaertner2010,
  author    = {Hillg{\"a}rtner, Michael},
  title     = {Normative Regulations},
  series = {ECPE Cluster Seminar EMC in Hybrid and Electric Vehicles : 18 May 2010, Fraunhofer Institute Erlangen},
  journal   = {ECPE Cluster Seminar EMC in Hybrid and Electric Vehicles : 18 May 2010, Fraunhofer Institute Erlangen},
  publisher = {European Center for Power Electronics},
  address   = {N{\"u}rnberg},
  year      = {2010},
  language  = {en}
}
@article{HoffmannSchermutzkiWinckelmannSchlieper2010,
  author    = {Hoffmann, Ulrich and Schermutzki, Margret and Winckelmann-Schlieper, Katja},
  title     = {Kompetenzbasierte Verzahnung von berufspraktischem und wissenschaftlichem Lernen : Der Studiengang Prozesstechnik der FH Aachen},
  series = {Berufsbildung in Wissenschaft und Praxis},
  volume    = {39},
  journal   = {Berufsbildung in Wissenschaft und Praxis},
  number    = {2},
  publisher = {Bundesinstitut f{\"u}r Berufsbildung (BiBB)},
  address   = {Bonn},
  issn      = {0341-4515},
  url       = {http://nbn-resolving.de/urn:nbn:de:0035-bwp-10232-7},
  pages     = {32 -- 36},
  year      = {2010},
  abstract  = {Durch rapide gesellschaftliche Ver{\"a}nderungen und neue Anforderungen auf dem Arbeitsmarkt gewinnt die akademische berufliche Weiterbildung zunehmend an Bedeutung. Die Nachfrage nach entsprechenden Angeboten ist sowohl seitens der Unternehmen als auch der Arbeitnehmer/-innen hoch. Die Hochschulen sind aufgefordert, darauf zu reagieren und Wege f{\"u}r lebenslanges Lernen aufzuzeigen, indem sie außerhalb der Hochschule erworbene Kenntnisse auf Hochschulabschl{\"u}sse anerkennen und M{\"o}glichkeiten schaffen, diese Kenntnisse mit dem Ziel weiterzuentwickeln, einen akademischen Abschluss zu erreichen. Dieser Beitrag stellt einen Studiengang vor, der es Berufst{\"a}tigen erm{\"o}glicht, durch die Anrechnung beruflich erworbener Kompetenzen bis zu 50 Prozent der zu erbringenden Studienleistung abzugelten.},
  language  = {de}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {132},
  journal   = {Journal of solar energy engineering},
  number    = {1},
  publisher = {ASME},
  address   = {New York},
  issn      = {0199-6231},
  doi       = {10.1115/1.4000332},
  pages     = {4 Seiten},
  year      = {2010},
  abstract  = {The cost of solar tower power plants is dominated by the heliostat field making up roughly 50\% of investment costs. Classical heliostat design is dominated by mirrors brought into position by steel structures and drives that guarantee high accuracies under wind loads and thermal stress situations. A large fraction of costs is caused by the stiffness requirements of the steel structure, typically resulting in ~ 20 kg/m² steel per mirror area. The typical cost figure of heliostats (figure mentioned by Solucar at Solar Paces Conference, Seville, 2006) is currently in the area of 150 €/m² caused by the increasing price of the necessary raw materials. An interesting option to reduce costs lies in a heliostat design where all moving parts are protected from wind loads. In this way, drives and mechanical layout may be kept less robust, thereby reducing material input and costs. In order to keep the heliostat at an appropriate size, small mirrors (around 10x10 cm²) have to be used, which are placed in a box with a transparent cover. Innovative drive systems are developed in order to obtain a cost-effective design. A 0,5x0,5 m² demonstration unit will be constructed. Tests of the unit are carried out with a high-precision artificial sun unit that imitates the sun's path with an accuracy of less than 0.5 mrad and creates a beam of parallel light with a divergence of less than 4 mrad.},
  language  = {en}
}
@article{SpelthahnSchaffrathCoppeetal.2010,
  author    = {Spelthahn, Heiko and Schaffrath, Sophie and Coppe, Thomas and Rufi, Frederic and Sch{\"o}ning, Michael Josef},
  title     = {Development of an electrolyte-insulator-semiconductor (EIS) based capacitive heavy metal sensor for the detection of Pb2+ und Cd2+ ions},
  series = {Physica status solidi (a) : applications and material science},
  volume    = {207},
  journal   = {Physica status solidi (a) : applications and material science},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983306},
  pages     = {930 -- 934},
  year      = {2010},
  abstract  = {Chalcogenide glass materials as membranes for potentiometric sensors for chemical analysis in solutions have been studied since more than 20 years. In this work, an electrolyte-insulator-semiconductor structure was combined with chalcogenide glass membranes prepared by means of the pulsed laser deposition technique. Depending on the membrane composition a selectivity to different ions (Cd2+ and Pb2+) is achieved. The different sensor membranes have been physically characterised using microscopy, ellipsometry, profilometry, atomic force microscopy (AFM), scanning electron microscopy (SEM) and Rutherford backscattering spectrometry (RBS). The electrochemical behaviour has been investigated via capacitance/voltage (C/V) and constant capacitance (ConCap) measurements and results in a Cd2+ sensitivity of 23.1 ± 0.6 mV per decade in a linear range from 7 × 10-6 to 10-2 mol/l and 24.4 ± 0.5 mV per decade in a linear range from 5 × 10-6 to 10-2 mol/l for Pb2+, respectively.},
  language  = {en}
}
@article{ClaessenGrefenMangetal.2010,
  author    = {Claessen, O. and Grefen, Dana and Mang, Thomas and Dikland, H. G. and Dikland, H. G. and Duin, M. van},
  title     = {Helle Fensterprofilmaterialien : Alterungsverhalten auf Basis von peroxidisch vernetztem EPDM},
  series = {Kautschuk, Gummi, Kunststoffe : KGK},
  volume    = {63},
  journal   = {Kautschuk, Gummi, Kunststoffe : KGK},
  number    = {9},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {0948-3276},
  pages     = {350 -- 360},
  year      = {2010},
  language  = {de}
}
@article{KernKloetersPferdemenges2010,
  author    = {Kern, Alexander and Kl{\"o}ters, Georg and Pferdemenges, J{\"o}rg},
  title     = {Optimised protection against lightning for the signalling and safety systems of level crossings on non-electrified railway lines},
  series = {RTR : European Rail Technology Review},
  volume    = {50},
  journal   = {RTR : European Rail Technology Review},
  number    = {2},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0079-9548},
  year      = {2010},
  language  = {en}
}
@article{Naujokat2010,
  author    = {Naujokat, Anke},
  title     = {Ut rhetorica architectura - Leon Battista Alberti´s Technique of Architectural Collage / Leon Battista Albertis architektonische Collagetechnik},
  series = {Candide : journal for architectural knowledge},
  volume    = {2},
  journal   = {Candide : journal for architectural knowledge},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  issn      = {1869-6465},
  pages     = {73 -- 100},
  year      = {2010},
  abstract  = {Leon Battista Alberti, probably the most innovative architect of early Renaissance Italy, has always fascinated scholars by virtue of the striking interpenetration of theory and practice manifest in his work. As an architect, Alberti was an autodidact. Without the benefit of the formative influence of a master or design education, the roots of his conception of architecture lie in his intellectual formation through humanistic rhetoric. The present study demonstrates with reference to a specific project — the Tempietto of the Holy Sepulchre in Florence — how Alberti's humanist approach conditioned his method of architectural design.},
  language  = {en}
}
@article{KernSchelthoffMathieu2010,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Die dynamische Blitzkugel : Wahrscheinlichkeitsberechnung f{\"u}r Blitzeinschl{\"a}ge in Geb{\"a}ude},
  series = {de - Fachzeitschrift f{\"u}r das Elektrohandwerk},
  journal   = {de - Fachzeitschrift f{\"u}r das Elektrohandwerk},
  number    = {13-14},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  issn      = {2509-517X},
  pages     = {24 -- 29},
  year      = {2010},
  language  = {de}
}
@article{Esch2010,
  author    = {Esch, Thomas},
  title     = {Trends in der Nutzfahrzeugantriebstechnik},
  series = {Motortechnische Zeitschrift (MTZ)},
  volume    = {71},
  journal   = {Motortechnische Zeitschrift (MTZ)},
  number    = {10},
  publisher = {Springer Nature},
  address   = {Basel},
  issn      = {0024-8525},
  doi       = {10.1007/bf03225608},
  pages     = {652 -- 658},
  year      = {2010},
  abstract  = {Umweltzonen und Fahrverbote, kletternde Dieselpreise und steigende Straßenbenutzungsgeb{\"u}hren setzen dem Transportgewerbe aktuell schwer zu. Nutzfahrzeughersteller und Partner finden auf diese Herausforderungen neue Antworten mit der Erf{\"u}llung der EEV-Grenzwerte (Enhanced Environmentally Friendly Vehicle) als den gegenw{\"a}rtig anspruchsvollsten europ{\"a}ischen Abgasstandard f{\"u}r Lkw und Busse.},
  language  = {de}
}
@article{BienerSasseWemhoff2010,
  author    = {Biener, Ernst and Sasse, Torsten and Wemhoff, Thomas},
  title     = {Deponie auf Deponie - Technische und genehmigungsrechtliche Aspekte},
  series = {Band 19: Abschluss und Rekultivierung von Deponien und Altlasten 2010 : Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste {\"A}nderungsverordnung zur neuen DepV ; Beitr{\"a}ge zum Seminar am 13. und 14. Oktober 2010 in Karlsruhe},
  journal   = {Band 19: Abschluss und Rekultivierung von Deponien und Altlasten 2010 : Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste {\"A}nderungsverordnung zur neuen DepV ; Beitr{\"a}ge zum Seminar am 13. und 14. Oktober 2010 in Karlsruhe},
  editor    = {Egloffstein, Thomas},
  publisher = {ICP-Eigenverlag},
  address   = {Karlsruhe},
  isbn      = {978-3-939662-08-2},
  pages     = {73 -- 84},
  year      = {2010},
  language  = {de}
}
@article{GronsfeldSparlaWeinnhold2010,
  author    = {Gronsfeld, Richard and Sparla, Peter and Weinnhold, Wolfgang},
  title     = {Airborne und terrestrisches Laserscanning - neue Tools f{\"u}r den Talsperrenbetreiber?},
  series = {Wasserwirtschaft},
  volume    = {100},
  journal   = {Wasserwirtschaft},
  number    = {4},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  doi       = {10.1007/BF03241621},
  pages     = {80 -- 82},
  year      = {2010},
  language  = {de}
}
@article{ThelenPaschmannHamelmann2010,
  author    = {Thelen, Jan and Paschmann, Hans and Hamelmann, Dirk},
  title     = {Zielsichere Herstellung und Anwendung von Fl{\"u}ssigboden},
  series = {bi-UmweltBau},
  journal   = {bi-UmweltBau},
  publisher = {bi-Medien-GmbH},
  address   = {Kiel},
  issn      = {2509-2685},
  pages     = {48 -- 49},
  year      = {2010},
  language  = {de}
}
@article{BlomeChiconeHehletal.2010,
  author    = {Blome, Hans-Joachim and Chicone, Carmen and Hehl, Friedrich W. and Mashhoon, Bahram},
  title     = {Nonlocal modification of Newtonian gravity},
  series = {Physical Review D},
  volume    = {81},
  journal   = {Physical Review D},
  number    = {6},
  publisher = {American Physical Society},
  address   = {Melville, NY},
  issn      = {0556-2821},
  doi       = {10.1103/PhysRevD.81.065020},
  year      = {2010},
  abstract  = {The Newtonian regime of a recent nonlocal extension of general relativity is investigated. Nonlocality is introduced via a scalar "constitutive" kernel in a special case of the translational gauge theory of gravitation, namely, the teleparallel equivalent of general relativity. In this theory, the nonlocal aspect of gravity simulates dark matter. A nonlocal and nonlinear generalization of Poisson's equation of Newtonian gravitation is presented. The implications of nonlocality for the gravitational physics in the solar system are briefly studied.},
  language  = {en}
}
@article{Timme2010,
  author    = {Timme, Michael},
  title     = {K{\"u}ndigung des Mietverh{\"a}ltnisses wegen nicht gezahlter Kosten eines Rechtsstreits},
  series = {Monatsschrift f{\"u}r deutsches Recht},
  volume    = {64},
  journal   = {Monatsschrift f{\"u}r deutsches Recht},
  number    = {19},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {10.9785/ovs-mdtr-2010-1089},
  pages     = {1089 -- 1091},
  year      = {2010},
  abstract  = {Der BGH hat entschieden, dass ein Vermieter einen Wohnraummietvertrag nicht deshalb k{\"u}ndigen kann, weil der Mieter die Prozesskosten eines fr{\"u}heren, auf Zahlungsverzug gest{\"u}tzten R{\"a}umungsprozesses nicht begleicht. Der folgende Beitrag beleuchtet die Konsequenzen dieser Entscheidung f{\"u}r die mietvertragliche Praxis},
  language  = {de}
}
@article{WagnerWernerMiyamotoetal.2010,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, Ko-ichiro and Ackermann, Hans-Josef and Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {FPGA-based LAPS device for the flexible design of sensing sites on functional interfaces},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983320},
  pages     = {844 -- 849},
  year      = {2010},
  abstract  = {The development of new interfaces for (bio-)chemical sensors requires comprehensive analyses and testing. The light-addressable potentiometric sensor (LAPS) can be used as a platform to investigate the sensitivity of a newly developed interface towards (bio-)chemical agents. LAPS measurements are spatially resolved by utilisation of focused light beams to define individual measurement spots. In this work, a new digitally modulated LAPS set-up based on an FPGA design will be introduced to increase the number of measurement spots, to shorten the measurement time and to improve the measurement accuracy.},
  language  = {en}
}
@article{FredebeulKreinKnoben2010,
  author    = {Fredebeul-Krein, Markus and Knoben, Werner},
  title     = {Long term risk sharing contracts as an approach to establish public-private partnerships for investment into next generation access networks},
  series = {Telecommunications Policy},
  volume    = {34},
  journal   = {Telecommunications Policy},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0308-5961},
  doi       = {10.1016/j.telpol.2010.07.011},
  pages     = {528 -- 539},
  year      = {2010},
  abstract  = {This paper develops an investment/pricing model for the deployment of basic broadband networks which, along with other applications, is applicable to public-private partnership projects. In particular, a new investment model is suggested to be used for finance deployment over a longer term by enabling both private and public investors to participate in the roll-out of next generation access (NGA) infrastructure. This so-called "long-term risk sharing concept" has several notable benefits compared with the traditional regulatory approach. Above all, the model enables both private operators and public authorities to share the risk of investing in NGA infrastructure. Thus the model offers a way for public authorities to achieve a timely and countrywide roll-out of NGA networks, including in areas where NGA investment would otherwise not occur.},
  language  = {en}
}
@article{FredebeulKrein2010,
  author    = {Fredebeul-Krein, Markus},
  title     = {Wirtschaftskrise : Staatliche F{\"o}rderung von glasfaserbasierten Breitbandnetzen?},
  series = {Wirtschaftsdienst},
  volume    = {90},
  journal   = {Wirtschaftsdienst},
  number    = {2},
  publisher = {ZBW},
  address   = {Berlin},
  issn      = {0043-6275},
  pages     = {113 -- 117},
  year      = {2010},
  abstract  = {Glasfaserbasierte Breitbandnetze werden in Deutschland auch aufgrund der Wirtschaftskrise nur sehr z{\"o}gerlich ausgebaut. Markus Fredebeul-Krein h{\"a}lt eine staatliche Subventionierung der Breitbandnetze nur bedingt f{\"u}r gerechtfertigt. Private Investoren ben{\"o}tigen jedoch dringend Planungssicherheit durch verl{\"a}ssliche Regulierungsvorschriften.},
  language  = {de}
}
@article{FredebeulKrein2010,
  author    = {Fredebeul-Krein, Markus},
  title     = {Die Abschaffung der Studiengeb{\"u}hren ist der falsche Weg!},
  series = {Der Ordnungspolitische Kommentar},
  journal   = {Der Ordnungspolitische Kommentar},
  year      = {2010},
  language  = {de}
}
@article{HirschfeldLustfeldReisseletal.2010,
  author    = {Hirschfeld, Julian A. and Lustfeld, Hans and Reißel, Martin and Steffen, Bernhard},
  title     = {A novel scheme for precise diagnostics and effective stabilization of currents in a fuel cell stack},
  series = {International Journal of Energy Research},
  volume    = {34},
  journal   = {International Journal of Energy Research},
  number    = {3},
  publisher = {Wiley},
  address   = {London},
  issn      = {0363-907X},
  doi       = {10.1002/er.1662},
  pages     = {293 -- 301},
  year      = {2010},
  abstract  = {A novel scheme for detecting inhomogeneous internal currents in a fuel cell stack is presented. In this paper the scheme is investigated for the case that the flow field plates consist of graphite. Then plates of high conductivity, e.g. aluminium between the flow field plates together with small slits in these plates have three effects: (a) Whenever a local inhomogeneity of the electric current occurs at a particular cell in the stack, this will induce a surface current close to that cell perpendicular to the averaged current. This current can be detected. (b) The plates of high conductivity completely prevent the inhomogeneities from spreading to neighbouring cells. (c) Even at the particular cell the inhomogeneity is suppressed as far as possible. Thus this scheme leads to much better diagnostic possibilities and at the same time reduces electric instabilities to an extent, where they probably become harmless. This scheme will first be explained for a simple model to clarify the idea. However, very precise three dimensional computations using realistic parameters are presented, corroborating the results of the simple model.},
  language  = {en}
}
@article{ScholzLeyDachwaldetal.2010,
  author    = {Scholz, A. and Ley, Wilfried and Dachwald, Bernd and Miau, J. J. and Juang, J. C.},
  title     = {Flight results of the COMPASS-1 picosatellite mission},
  series = {Acta Astronautica},
  volume    = {76},
  journal   = {Acta Astronautica},
  number    = {9-10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0094-5765},
  doi       = {10.1016/j.actaastro.2010.06.040},
  pages     = {1289 -- 1298},
  year      = {2010},
  abstract  = {The mission of the COMPASS-1 picosatellite is to take pictures of the earth, to validate a space-borne GPS receiver developed by the German Aerospace Center, and to verify the proper operation of the magnetic attitude control system in orbit. The spacecraft was launched on April 28, 2008 from the Indian space port Sriharikota, as part of the PSLV-C9 world record launch that simultaneously brought ten satellites into orbit. The mission operations were carried out from the ground stations in Aachen and Tainan. Arising difficulties in the communication link were overcome with the support of individuals from the amateur radio community. After several months of mission operation, abundant housekeeping and mission data has been commanded, received and analyzed and is presented in this paper.},
  language  = {en}
}
@article{HirschfeldLustfeldReisseletal.2010,
  author    = {Hirschfeld, Julian A. and Lustfeld, Hans and Reißel, Martin and Steffen, Bernhard},
  title     = {Tomographic diagnostics of current distributions in a fuel cell stack},
  series = {International Journal of Energy Research},
  volume    = {34},
  journal   = {International Journal of Energy Research},
  number    = {3},
  publisher = {Wiley},
  address   = {London},
  issn      = {0363-907X},
  doi       = {10.1002/er.1634},
  pages     = {284 -- 292},
  year      = {2010},
  abstract  = {A novel tomographic scheme for analysing the state of any single membrane electrode assembly (MEA) in a stack is suggested. Plates of very high conductivity placed between every fuel cell and slitted in an appropriate manner cause surface currents at well-defined locations of the stack. We show that knowing these surface currents, information about anomalies of the currents in a MEA can be obtained using the methods of tomography. The results are mathematically not unique. However, when assuming plausible defect structures, one can exclude improbable deficiencies by applying a special form of simulated annealing. We present numerical calculations of typical examples demonstrating that the essential defects of the MEA in any single cell of the stack can be detected and their extent can be determined.},
  language  = {en}
}
@article{FredebeulKrein2010,
  author    = {Fredebeul-Krein, Markus},
  title     = {Studiengeb{\"u}hren sind sozial gerecht},
  series = {INSM-{\"O}konomenblog},
  journal   = {INSM-{\"O}konomenblog},
  publisher = {INSM},
  address   = {Berlin},
  year      = {2010},
  language  = {de}
}
@article{Frings2010,
  author    = {Frings, Michael},
  title     = {Das neue Recht der Zahlungsdienste},
  series = {NWB Steuer- und Wirtschaftsrecht},
  journal   = {NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {1151 -- 1159},
  year      = {2010},
  language  = {de}
}
@article{Frings2010,
  author    = {Frings, Michael},
  title     = {Das neue Recht des Verbraucherkredits},
  series = {NWB Steuer- und Wirtschaftsrecht},
  journal   = {NWB Steuer- und Wirtschaftsrecht},
  number    = {20},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {1608 -- 1617},
  year      = {2010},
  language  = {de}
}
@article{BalakrishnanAndreiSelmerSelmeretal.2010,
  author    = {Balakrishnan, Karthikeyan and Andrei-Selmer, Luminita-Cornelia and Selmer, Thorsten and Bacher, Michael and Dodel, Richard},
  title     = {Comparison of intravenous immunoglobulins for naturally occurring autoantibodies against amyloid-β},
  series = {Journal of Alzheimer's Disease},
  volume    = {20},
  journal   = {Journal of Alzheimer's Disease},
  number    = {1},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1387-2877},
  doi       = {10.3233/JAD-2010-1353},
  pages     = {135 -- 143},
  year      = {2010},
  abstract  = {Intravenous immunoglobulins (IVIG) are currently used for therapeutic purposes in autoimmune disorders. Recently, we demonstrated the presence of naturally occurring antibodies against amyloid- β (nAbs-Aβ) within the pool of IVIG. In this study, we compared different brands of IVIG for nAbs-Aβ and have found differences in the specificity of the nAbs-Aβ towards Aβ1-40 and Aβ1-42 . We analyzed the influence of a pH-shift over the course of antibody storage using ELISA and investigated antibody dimerization at acidic and neutral pH as well as differences in the IgG subclass distributions among the IVIG using both HPLC and a nephelometric assay. Furthermore, we investigated the epitope region of purified nAbs-Aβ. The differences found in Aβ specificity are not directly proportionate to the binding nature of these antibodies when administered in vivo. This information, however, may serve as a guide when choosing the commercial source of IVIG for therapeutic applications in Alzheimer's disease},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2010,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Solar tower power plant in Germany and future perspectives of the development of the technology in Greece and Cyprus},
  series = {Renewable Energy},
  volume    = {35},
  journal   = {Renewable Energy},
  number    = {7},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2009.11.003},
  pages     = {1352 -- 1356},
  year      = {2010},
  abstract  = {Since the 80s power production with solar thermal power plants has been a way to substitute fossil fuels. By concentrating direct solar radiation from heliostats very high temperatures of a thermal fluid can be reached. The resulting heat is converted to mechanical energy in a steam cycle which generates electricity. High efficiencies and fast start-up are reached by using air as a heat medium, as well as using porous ceramic materials as solar receiver of the concentrated sunlight. In Germany the construction of a 1.5 MWe solar tower power plant began in 2008. It is operational since December 2008 and started production of electricity in the spring of 2009. In Greece and Cyprus, countries with high solar potential, the development of this competitive solar thermal technology is imperative, since it has already been implemented in other Mediterranean countries.},
  language  = {en}
}
@inproceedings{BaumannTeixeiraBouraGoettscheetal.2010,
  author    = {Baumann, Torsten and Teixeira Boura, Cristiano Jos{\´e} and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and O'Connell, Bryan and Schmitz, Stefan and Zunft, Stefan},
  title     = {Air/Sand heat exchanger design and materials for solar thermal power plant applications},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {146 -- 147},
  year      = {2010},
  language  = {en}
}
@article{BaeckerPoghossianAbouzaretal.2010,
  author    = {B{\"a}cker, Matthias and Poghossian, Arshak and Abouzar, Maryam H. and Wenmackers, Sylvia and Janssens, Stoffel D. and Haenen, Ken and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive field-effect (bio-)chemical sensors based on nanocrystalline diamond films},
  series = {MRS Online Proceedings Library},
  volume    = {1203},
  journal   = {MRS Online Proceedings Library},
  publisher = {MRS},
  address   = {Warrendale},
  issn      = {1946-4274},
  year      = {2010},
  abstract  = {Capacitive field-effect electrolyte-diamond-insulator-semiconductor (EDIS) structures with O-terminated nanocrystalline diamond (NCD) as sensitive gate material have been realized and investigated for the detection of pH, penicillin concentration, and layer-by-layer adsorption of polyelectrolytes. The surface oxidizing procedure of NCD thin films as well as the seeding and NCD growth process on a Si-SiO2 substrate have been improved to provide high pH-sensitive, non-porous thin films without damage of the underlying SiO2 layer and with a high coverage of O-terminated sites. The NCD surface topography, roughness, and coverage of the surface groups have been characterized by SEM, AFM and XPS methods. The EDIS sensors with O-terminated NCD film treated in oxidizing boiling mixture for 45 min show a pH sensitivity of about 50 mV/pH. The pH-sensitive properties of the NCD have been used to develop an EDIS-based penicillin biosensor with high sensitivity (65-70 mV/decade in the concentration range of 0.25-2.5 mM penicillin G) and low detection limit (5 μM). The results of label-free electrical detection of layer-by-layer adsorption of charged polyelectrolytes are presented, too.},
  language  = {en}
}
@article{BegingMlynekHataihimakuletal.2010,
  author    = {Beging, Stefan and Mlynek, Daniela and Hataihimakul, Sudkanung and Poghossian, Arshak and Baldsiefen, Gerhard and Busch, Heinz and Laube, Norbert and Kleinen, Lisa and Sch{\"o}ning, Michael Josef},
  title     = {Field-effect calcium sensor for the determination of the risk of urinary stone formation},
  series = {Sensors and Actuators B: Chemical},
  volume    = {144},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2008.12.012},
  pages     = {374 -- 379},
  year      = {2010},
  abstract  = {Urinary stone formation has been evolved to a widespread disease during the last years. The reason for the formation of urinary stones are little crystals, mostly composed of calcium oxalate, which are formed in human kidneys. The early diagnosis of the risk for urinary stone formation of patients can be determined by the "Bonn-Risk-Index" method based on the potentiometric detection of the Ca2+-ion concentration and an optical determination of the triggered crystallisation of calcium oxalate in unprocessed urine. In this work, miniaturised capacitive field-effect EMIS (electrolyte-membrane-insulator-semiconductor) sensors have been developed for the determination of the Ca2+-ion concentration in human native urine. The Ca2+-sensitive EMIS sensors have been systematically characterised by impedance spectroscopy, capacitance-voltage and constant-capacitance method in terms of sensitivity, signal stability and response time in both CaCl2 solutions and in native urine. The obtained results demonstrate the suitability of EMIS sensors for the measurement of the Ca2+-ion concentration in native urine of patients.},
  language  = {en}
}
@article{ReisertHenkelSchneideretal.2010,
  author    = {Reisert, Steffen and Henkel, Hartmut and Schneider, Andreas and Sch{\"a}fer, Daniel and Friedrich, Peter and Berger, J{\"o}rg and Sch{\"o}ning, Michael Josef},
  title     = {Development of a handheld sensor system for the online measurement of hydrogen peroxide in aseptic filling systems},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983304},
  pages     = {913 -- 918},
  year      = {2010},
  abstract  = {A handheld sensor system for the online measurement of hydrogen peroxide (H2O2) in aseptic sterilisation processes has been developed. It is based on a calorimetric-type gas sensor that consists of a differential set-up of two temperature sensors, of which one is catalytically activated and the second one is passivated and used as reference. The sensor principle relies in detecting a rise in temperature on the active sensor due to the exothermic reaction of H2O2 on the catalytic surface. To characterise the sensor system towards H2O2 sensitivity and other influencing factors, measurements have been carried out both at an experimental set-up and a manufacturer's sterilisation machine. Physical sensor characterisation was done by means of the optical microscopy.},
  language  = {en}
}
@article{MiyamotoSugawaraKanohetal.2010,
  author    = {Miyamoto, Ko-ichiro and Sugawara, Yuri and Kanoh, Shin´ichiro and Yoshinobu, Tatsuo and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Image correction method for the chemical imaging sensor},
  series = {Sensors and Actuators B: Chemical},
  volume    = {144},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2008.10.069},
  pages     = {344 -- 348},
  year      = {2010},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of chemical species. For the practical application of this sensor, artifacts in the chemical images due to defects of the semiconductor substrate and contamination of the sensing surface etc. have been a major problem. An image correction method was developed to eliminate the influence of nonuniformity of individual sensor plate.},
  language  = {en}
}
@article{AbouzarPoghossianSiqueiraetal.2010,
  author    = {Abouzar, Maryam H. and Poghossian, Arshak and Siqueira, Jos{\´e} R. Jr. and Oliveira, Osvaldo N. Jr. and Moritz, Werner and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive electrolyte-insulator-semiconductor structures functionalised with a polyelectrolyte/enzyme multilayer: New strategy for enhanced field-effect biosensing},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983317},
  pages     = {884 -- 890},
  year      = {2010},
  abstract  = {A novel strategy for enhanced field-effect biosensing using capacitive electrolyte-insulator-semiconductor (EIS) structures functionalised with pH-responsive weak polyelectrolyte/enzyme or dendrimer/enzyme multilayers is presented. The feasibility of the proposed approach is exemplarily demonstrated by realising a penicillin biosensor based on a capacitive p-Si-SiO2 EIS structure functionalised with a poly(allylamine hydrochloride) (PAH)/penicillinase and a poly(amidoamine) dendrimer/penicillinase multilayer. The developed sensors response to changes in both the local pH value near the gate surface and the charge of macromolecules induced via enzymatic reaction, resulting in a higher sensitivity. For comparison, an EIS penicillin biosensor with adsorptively immobilised penicillinase has been also studied. The highest penicillin sensitivity of 100 mV/dec has been observed for the EIS sensor functionalised with the PAH/penicillinase multilayer. The lower and upper detection limit was around 20 µM and 10 mM, respectively. In addition, an incorporation of enzymes in a multilayer prepared by layer-by-layer technique provides a larger amount of immobilised enzymes per sensor area, reduces enzyme leaching effects and thus, enhances the biosensor lifetime (the loss of penicillin sensitivity after 2 months was 10-12\%).},
  language  = {en}
}
@article{SchoeningKirchnerNgetal.2010,
  author    = {Sch{\"o}ning, Michael Josef and Kirchner, Patrick and Ng, Yue Ann and Spelthahn, Heiko and Schneider, Andreas and Henkel, Hartmut and Friedrich, Peter and Kolstad, Jens and Berger, J{\"o}rg and Keusgen, Michael},
  title     = {Gas sensor investigation based on a catalytically activated thin-film thermopile for H2O2 detection},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983309},
  pages     = {787 -- 792},
  year      = {2010},
  abstract  = {In aseptic filling systems, hydrogen peroxide vapour is commonly used for the reduction of microbial contaminations in carton packages. In this process, the germicidal efficiency of the vapour depends especially on the H₂O₂ concentration. To monitor the H₂O₂ concentration, a calorimetric H₂O₂ gas sensor based on a catalytically activated thin-film thermopile is investigated. Two different sensor layouts, namely a circular and a linear form, as well as two various material pairs such as tungsten/nickel and gold/nickel, have been examined for the realization of a thin-film thermopile. Additionally, manganese oxide and palladium particles have been compared as responsive catalysts towards H₂O₂. The thin-film sensors have been investigated at various H₂O₂ concentrations, gas temperatures and flow rates.},
  language  = {en}
}
@article{TurekHeidenGuoetal.2010,
  author    = {Turek, Monik and Heiden, Wolfgang and Guo, Sharon and Riesen, Alfred and Schubert, J{\"u}rgen and Zander, Willi and Kr{\"u}ger, Peter and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983303},
  pages     = {817 -- 823},
  year      = {2010},
  abstract  = {In environmental analysis, cyanide and heavy metals play an important role, because these substances are highly toxic for biological systems. They can lead to chronic and acute diseases. Due to the chemical properties of cyanide it is frequently used for industrial processes such as extraction of silver and gold. Heavy metals can be found as trace elements in nature and are often applied in industries e.g., galvanization processes. Up to now, cyanide and heavy metals can be detected by several sensors separately and their detection is often limited to laboratory investigations. In this publication, with regard to an in situ analysis, a new miniaturized silicon-based sensor system for the simultaneous detection of cyanide and heavy metals in aqueous solutions is presented that is based on chalcogenide glass-based micro ion-selective electrodes (µISEs). The µISEs are incorporated into a specially designed measuring system for the simultaneous detection of heavy metals and cyanide in solutions and validated by simultaneous measurements of Cu2+- and CN--ions, Cd2+- and CN-- ions and Pb2+- and CN--ions. The particular sensor system has shown good sensor properties in the µ-molar ion-concentration range. For simultaneous measurements in complex heavy metal and cyanide solutions an intelligent software using fuzzy logic is discussed.},
  language  = {en}
}
@article{JansenBehbahaniLaumenetal.2010,
  author    = {Jansen, S. V. and Behbahani, Mehdi and Laumen, M. and Kaufmann, T. and Hormes, M. and Behr, Marek and Schmitz-Rode, T. and Steinseifer, U.},
  title     = {Investigation of Steady Flow Through a Realistic Model of the Thoracic Human Aorta Using 3D Stereo PIV and CFD-Simulation},
  series = {ASAIO Journal},
  volume    = {56},
  journal   = {ASAIO Journal},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {98},
  year      = {2010},
  language  = {en}
}
@article{BehbahaniProbstMaietal.2010,
  author    = {Behbahani, Mehdi and Probst, M. and Mai, A. and Tran, L. and Vonderstein, K. and Keschenau, P. and Linde, T. and Steinseifer, U. and Behr, Marek and Mottaghy, K.},
  title     = {The influence of high shear on thrombosis and hemolysis in artificial organs},
  series = {The International Journal of Artificial Organs},
  volume    = {33},
  journal   = {The International Journal of Artificial Organs},
  number    = {7},
  publisher = {Sage},
  address   = {Thousand Oaks},
  issn      = {0391-3988},
  pages     = {426 -- 426},
  year      = {2010},
  language  = {en}
}
@article{SiqueiraBaeckerPoghossianetal.2010,
  author    = {Siqueira, Jos{\´e} R. Jr. and B{\"a}cker, Matthias and Poghossian, Arshak and Zucolotto, Valtencir and Oliveira, Osvaldo N. Jr. and Sch{\"o}ning, Michael Josef},
  title     = {Associating biosensing properties with the morphological structure of multilayers containing carbon nanotubes on field-effect devices},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983301},
  pages     = {781 -- 786},
  year      = {2010},
  abstract  = {The control of molecular architecture provided by the layer-by-layer (LbL) technique has led to enhanced biosensors, in which advantageous features of distinct materials can be combined. Full optimization of biosensing performance, however, is only reached if the film morphology is suitable for the principle of detection of a specific biosensor. In this paper, we report a detailed morphology analysis of LbL films made with alternating layers of single-walled carbon nanotubes (SWNTs) and polyamidoamine (PAMAM) dendrimers, which were then covered with a layer of penicillinase (PEN). An optimized performance to detect penicillin G was obtained with 6-bilayer SWNT/PAMAM LbL films deposited on p-Si-SiO2-Ta2O5 chips, used in biosensors based on a capacitive electrolyte-insulator-semiconductor (EIS) and a light-addressable potentiometric sensor (LAPS) structure, respectively. Field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) images indicated that the LbL films were porous, with a large surface area due to interconnection of SWNT into PAMAM layers. This morphology was instrumental for the adsorption of a larger quantity of PEN, with the resulting LbL film being highly stable. The experiments to detect penicillin were performed with constant-capacitance (ConCap) and constant-current (CC) measurements for EIS and LAPS sensors, respectively, which revealed an enhanced detection signal and sensitivity of ca. 100 mV/decade for the field-effect sensors modified with the PAMAM/SWNT LbL film. It is concluded that controlling film morphology is essential for an enhanced performance of biosensors, not only in terms of sensitivity but also stability and response time.},
  language  = {en}
}
@article{GosslaButtelWahrmundetal.2010,
  author    = {Gossla, Ulrich and Buttel, Luc and Wahrmund, Holger and Mehlig, Bernd},
  title     = {Bemessung, Anwendung und Qualit{\"a}tssicherung von Stahlfaserspritzbeton im Tunnelbau},
  series = {Beton- und Stahlbetonbau},
  volume    = {105},
  journal   = {Beton- und Stahlbetonbau},
  number    = {2},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {0005-9900},
  doi       = {10.1002/best.200900688},
  pages     = {92 -- 101},
  year      = {2010},
  abstract  = {Die Spritzbetonbauweise hat sich im Tunnelbau seit Jahren bew{\"a}hrt. Spritzbeton wird als unbewehrter Beton, in Verbindung mit Bewehrung sowie als Stahlfaserspritzbeton eingesetzt. Bei den meisten Tunnelschalen aus Stahlfaserspritzbeton werden Stahlfasern derzeit nur als konstruktive Bewehrung verwendet. Die Faserzugabe f{\"u}hrt zu einer nennenswerten Erh{\"o}hung der Bruchenergie und somit zu einer h{\"o}heren Z{\"a}higkeit des sonst spr{\"o}den Materials und damit zu einer h{\"o}heren Sicherheit. Stahlfaserspritzbeton kann auch anstelle von Spritzbeton mit statisch erforderlicher Mattenbewehrung eingesetzt werden. Die Bemessung erfolgt dann unter Ber{\"u}cksichtigung der Nachrisszugfestigkeit. Diese kann wie bei Stahlfaserbeton an Biegebalken ermittelt werden, die aus gr{\"o}ßeren Proben herausges{\"a}gt werden. Anhand von verschiedenen Beispielen werden die unterschiedlichen Anwendungen aufgezeigt und die daf{\"u}r erforderlichen Pr{\"u}fungen vorgestellt.},
  language  = {de}
}
@article{UllrichGrottkeRossaintetal.2010,
  author    = {Ullrich, Sebastian and Grottke, Oliver and Rossaint, Rolf and Staat, Manfred and Deserno, Thomas M. and Kuhlen, Torsten},
  title     = {Virtual Needle Simulation with Haptics for Regional Anaesthesia},
  pages     = {3 Seiten},
  year      = {2010},
  language  = {en}
}
@article{Timme2010,
  author    = {Timme, Michael},
  title     = {Mietschuldenfreiheitsbescheinigung durch den bisherigen Vermieter?},
  series = {MDR Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {64},
  journal   = {MDR Monatsschrift f{\"u}r Deutsches Recht},
  number    = {2},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {10.9785/ovs-mdtr-2010-60},
  pages     = {60 -- 61},
  year      = {2010},
  abstract  = {Der VIII. Zivilsenat des BGH hat entschieden, dass ein Mieter von seinem ehemaligen Vermieter keine „Mietschuldenfreiheitsbescheinigung'' verlangen kann, die {\"u}ber eine Quittung f{\"u}r die erhaltenen Mietzahlungen hinausgeht. Der folgende Beitrag untersucht die Konsequenzen der aktuellen Entscheidung.},
  language  = {de}
}
@article{ProbstBehbahaniBorrmannetal.2010,
  author    = {Probst, M. and Behbahani, Mehdi and Borrmann, E. and Elgeti, S. and Nicolai, M. and Behr, Marek},
  title     = {Hemodynamic Modeling for Numerical Analysis and Design of Medical Devices},
  year      = {2010},
  language  = {en}
}
@article{TimmeHuelk2010,
  author    = {Timme, Michael and H{\"u}lk, Fabian},
  title     = {Schriftform bei Mietvertrag mit einer Aktiengesellschaft},
  series = {Neue Zeitschrift f{\"u}r Gesellschaftsrecht (NZG)},
  volume    = {13},
  journal   = {Neue Zeitschrift f{\"u}r Gesellschaftsrecht (NZG)},
  number    = {5},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {1434-9272},
  pages     = {177 -- 178},
  year      = {2010},
  language  = {de}
}
@article{BehbahaniMaiBergmannetal.2010,
  author    = {Behbahani, Mehdi and Mai, A. and Bergmann, B. and Waluga, C. and Behr, Marek and Tran, L. and Vonderstein, K. and Mottaghy, K.},
  title     = {Modeling and Numerical Simulation of Blood Damage},
  year      = {2010},
  language  = {en}
}
@article{Timme2010,
  author    = {Timme, Michael},
  title     = {Die Schenkung eines Tieres an einen beschr{\"a}nkt Gesch{\"a}ftsf{\"a}higen},
  series = {Juristische Arbeitsbl{\"a}tter},
  journal   = {Juristische Arbeitsbl{\"a}tter},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0720-6356},
  pages     = {174 -- 176},
  year      = {2010},
  language  = {de}
}
@inproceedings{PfaffLarkowskiBurnham2010,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An approach to adaptive control in the behavioural framework},
  series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {United Kingdom Automatic Control Council},
  isbn      = {978-1-62748-119-9},
  pages     = {833 -- 838},
  year      = {2010},
  language  = {en}
}
@article{RibitschKarlBirnerGruenbergeretal.2010,
  author    = {Ribitsch, Doris and Karl, Wolfgang and Birner-Gruenberger, Ruth and Gruber, Karl and Eiteljoerg, Inge and Remler, Peter and Wieland, Susanne and Siegert, Petra and Maurer, Karl-Heinz and Schwab, Helmut},
  title     = {C-terminal truncation of a metagenome-derived detergent protease for effective expression in E. coli},
  series = {Journal of biotechnology},
  volume    = {150},
  journal   = {Journal of biotechnology},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2010.09.947},
  pages     = {408 -- 416},
  year      = {2010},
  abstract  = {Recently, a new alkaline protease named HP70 showing highest homology to extracellular serine proteases of Stenotrophomonas maltophilia and Xanthomonas campestris was found in the course of a metagenome screening for detergent proteases (Niehaus et al., submitted for publication). Attempts to efficiently express the enzyme in common expression hosts had failed. This study reports on the realization of overexpression in Escherichia coli after structural modification of HP70. Modelling of HP70 resulted in a two-domain structure, comprising the catalytic domain and a C-terminal domain which includes about 100 amino acids. On the basis of the modelled structure the enzyme was truncated by deletion of most of the C-terminal domain yielding HP70-C477. This structural modification allowed effective expression of active enzyme using E. coli BL21-Gold as the host. Specific activity of HP70-C477 determined with suc-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide as the substrate was 30 ± 5 U/mg compared to 8 ± 1 U/mg of the native enzyme. HP70-C477 was most active at 40 °C and pH 7-11; these conditions are prerequisite for a potential application as detergent enzyme. Determination of kinetic parameters at 40 °C and pH = 9.5 resulted in KM = 0.23 ± 0.01 mM and kcat = 167.5 ± 3.6 s⁻¹. MS-analysis of peptide fragments obtained from incubation of HP70 and HP70-C477 with insulin B indicated that the C-terminal domain influences the cleavage preferences of the enzyme. Washing experiments confirmed the high potential of HP70-C477 as detergent protease.},
  language  = {en}
}
@misc{NamAroraBehbahanietal.2010,
  author    = {Nam, J. and Arora, D. and Behbahani, Mehdi and Probst, M. and Benkowski, R. and Behr, Marek and Pasquali, M.},
  title     = {New computational method in hemolysis analysis for artificial heart pump},
  series = {ASAIO Journal},
  volume    = {56},
  journal   = {ASAIO Journal},
  number    = {2},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {Philadelphia},
  doi       = {10.1097/01.mat.0000369377.65122.a3},
  pages     = {98},
  year      = {2010},
  abstract  = {The MicroMed DeBakey ventricular assist device is an axial flow pump designed for providing long-term support to end-stage heartfailure patients. Previously, we presented computational analysis of the blood pump flow. From the analysis, we were able to identify regions of high shear and recirculating flow that may cause blood damage, for example, deformation and fragmentation of the red blood cell (RBC). This mechanical hemolysis can be predicted using a tensor-based blood damage model that is based on the physical properties of the RBCs, for example, the relaxation time of the RBC membrane. However, an extensive and detailed analysis was complicated by the fact that the previous method predicts hemolysis along a finite number of pathlines traversed by the RBCs, possibly omitting parts of the flow domain. Furthermore, it is computationally expensive and is not easily parallelizable. Here, we propose a new method to estimate hemolysis. The method is based on treating the shape of droplet (tensor) as a field variable, like velocity in the Navier-Stokes system. The governing equation for the RBC shape is treated by least-squares finite element method and the volume conservation of the RBC is augmented by Lagrangian multiplier. Unlike the previous method, the proposed method can visualize areas of high RBC strain that is potentially dangerous for mechanical hemolysis. Also, the amount of plasma-free hemoglobin and, consequently, normalized index of hemolysis can be computed as a byproduct. The method is tested in a simple shear flow for validation and an artery graft flow is chosen to show its potential usefulness. Finally, the method is applied to the blood damage estimation for the pump.},
  language  = {en}
}
@inproceedings{BitzKraffOrzadaetal.2010,
  author    = {Bitz, Andreas and Kraff, O. and Orzada, S. and Maderwald, S. and Brote, Irina and Ladd, M.},
  title     = {Experimental and Numerical Assessment of RF Safety of Transmit Coils at 7 Tesla},
  series = {ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010},
  booktitle = {ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010},
  isbn      = {978-1-62276-088-6},
  pages     = {195},
  year      = {2010},
  language  = {en}
}
@incollection{BudaSchuermannWollert2010,
  author    = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg F.},
  title     = {Wireless technologies in factory automation},
  series = {Factory automation / ed. by Javier Silvestre-Blanes},
  booktitle = {Factory automation / ed. by Javier Silvestre-Blanes},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-7619-42-8},
  pages     = {29 -- 50},
  year      = {2010},
  language  = {en}
}
@incollection{SchuermannBudaJonkeretal.2010,
  author    = {Sch{\"u}rmann, Volker and Buda, Aurel and Jonker, Stefan and Palmhof, Norman and Wollert, J{\"o}rg F.},
  title     = {Wireless in future automotive applications},
  series = {Mobile and wireless communications network layer and circuit level design / ed. by Salma Ait Fares ...},
  booktitle = {Mobile and wireless communications network layer and circuit level design / ed. by Salma Ait Fares ...},
  publisher = {Intech},
  address   = {London},
  isbn      = {978-953-307-042-1},
  pages     = {71 -- 92},
  year      = {2010},
  language  = {en}
}