@article{HeuermannSadeghfam2009,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Enhanced system architecture for rugged wide band data transmission / Sadeghfam, A. ; Heuermann, H.},
  series = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  journal   = {European Radar Conference, 2009 : EuRAD 2009 ; Sept. 30 - Oct. 2 2009, Rome, Italy ; part of the European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-2-87487-014-9},
  pages     = {347 -- 350},
  year      = {2009},
  language  = {en}
}
@article{vonKnobelsdorfBrenkenhoffFrauenrathProthmannetal.2010,
  author    = {von Knobelsdorf-Brenkenhoff, Florian and Frauenrath, Tobias and Prothmann, Marcel and Dieringer, Matthias A. and Hezel, Fabian and Renz, Wolfgang and Kretschel, Kerstin and Niendorf, Thoralf and Schulz-Menger, Jeanette},
  title     = {Cardiac chamber quantification using magnetic resonance imaging at 7 Tesla—a pilot study},
  volume    = {20},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {0938-7994},
  doi       = {10.1007/s00330-010-1888-2},
  pages     = {2844 -- 2852},
  year      = {2010},
  abstract  = {Objectives Interest in cardiovascular magnetic resonance (CMR) at 7 T is motivated by the expected increase in spatial and temporal resolution, but the method is technically challenging. We examined the feasibility of cardiac chamber quantification at 7 T. Methods A stack of short axes covering the left ventricle was obtained in nine healthy male volunteers. At 1.5 T, steady-state free precession (SSFP) and fast gradient echo (FGRE) cine imaging with 7 mm slice thickness (STH) were used. At 7 T, FGRE with 7 mm and 4 mm STH were applied. End-diastolic volume, end-systolic volume, ejection fraction and mass were calculated. Results All 7 T examinations provided excellent blood/myocardium contrast for all slice directions. No significant difference was found regarding ejection fraction and cardiac volumes between SSFP at 1.5 T and FGRE at 7 T, while volumes obtained from FGRE at 1.5 T were underestimated. Cardiac mass derived from FGRE at 1.5 and 7 T was larger than obtained from SSFP at 1.5 T. Agreement of volumes and mass between SSFP at 1.5 T and FGRE improved for FGRE at 7 T when combined with an STH reduction to 4 mm. Conclusions This pilot study demonstrates that cardiac chamber quantification at 7 T using FGRE is feasible and agrees closely with SSFP at 1.5 T.},
  language  = {en}
}
@article{HagebeukerLangeRingbeck2004,
  author    = {Hagebeuker, Bianca and Lange, Robert and Ringbeck, Thorsten},
  title     = {Bildverarbeitung mit der dritten Dimension : wenn die Pixel auch Laufzeiten auswerten},
  series = {Sensor-Report : Sensorik, Messtechnik, Bildverarbeitung, Fabrikautomation. - 2004, H. 2},
  journal   = {Sensor-Report : Sensorik, Messtechnik, Bildverarbeitung, Fabrikautomation. - 2004, H. 2},
  publisher = {Rek \& Thomas},
  address   = {St. Gallen},
  issn      = {0179-9592},
  pages     = {11 -- 17},
  year      = {2004},
  language  = {de}
}
@article{Wolf2012,
  author    = {Wolf, Martin R.},
  title     = {Von Security Awareness zum Secure Behaviour},
  series = {Hakin9 Extra - IT-Forensik},
  volume    = {2012},
  journal   = {Hakin9 Extra - IT-Forensik},
  number    = {5},
  publisher = {Software Wydawnictwo},
  address   = {Warszawa},
  issn      = {1733-7186},
  pages     = {18 -- 19},
  year      = {2012},
  abstract  = {Security Awareness ist derzeit ein viel diskutiertes Thema. Es reicht nicht, einfach nur ein paar technische Systeme (z.B. Firewalls) zu installieren, um ein angemessenes Schutzniveau zu erzielen. Neben einer guten Organisation von IT Security ist es auch notwendig, den Mitarbeiter einzubinden. Der vielzitierte "Faktor Mensch" ist derjenige, der die Technik korrekt anwenden muss und der durch falsches Verhalten technische und organisatorische Schutzmaßnahmen aushebeln kann. Deshalb reicht es nicht aus, wenn sich der Mitarbeiter der Gefahren bewusst ("aware") ist, er muss auch dementsprechend "sicher" handeln.},
  language  = {de}
}
@article{FuchsRitz2011,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Absatzkan{\"a}le kaum verkn{\"u}pft},
  series = {IT-Mittelstand : IT-Business im Mittelstand},
  volume    = {2011},
  journal   = {IT-Mittelstand : IT-Business im Mittelstand},
  number    = {9},
  publisher = {Medienhaus-Verlag},
  address   = {Bergisch-Gladbach},
  pages     = {16},
  year      = {2011},
  language  = {de}
}
@article{BragardBragard2003,
  author    = {Bragard, Michael and Bragard, G.},
  title     = {Erweiterungen f{\"u}r das CBL2-Messinterface von Texas-Instruments},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {56},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {2},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {87 -- 88},
  year      = {2003},
  abstract  = {Das von Texas-Instruments (TI) vertriebene Interface CBL2 wird {\"u}ber einige TI-Grafik-Rechner (TI-92, TI-89 usw.) angesteuert. Wegen seiner Handlichkeit wird dieses System beim Unterricht in wechselnden R{\"a}umen »großen« Messwerterfassungssystemen oft vorgezogen. Das CBL2 bietet drei analoge Eing{\"a}nge, die immerhin mit 10 Bit Aufl{\"o}sung und bis zu einer Frequenz von 50 kHz arbeiten. Weiterhin besitzt das CBL2 eine Buchse f{\"u}r angeblich nur einen digitalen Ein- bzw. Ausgang. An diesem Eingang wird standardm{\"a}ßig haupts{\"a}chlich der Bewegungssensor CBR betrieben. In diesem Beitrag werden Erweiterungsm{\"o}glichkeiten dieses Anschlusses beschrieben.},
  language  = {de}
}
@article{HueningHeuermannWacheetal.2018,
  author    = {H{\"u}ning, Felix and Heuermann, Holger and Wache, Franz-Josef and Jajo, Rami Audisho},
  title     = {A new wireless sensor interface using dual-mode radio},
  series = {Journal of Sensors and Sensor Systems : JSSS},
  volume    = {Volume 7},
  journal   = {Journal of Sensors and Sensor Systems : JSSS},
  number    = {2},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  doi       = {10.5194/jsss-7-507-2018},
  pages     = {507 -- 515},
  year      = {2018},
  abstract  = {The integration of sensors is one of the major tasks in embedded, control and "internet of things" (IoT) applications. For the integration mainly digital interfaces are used, starting from rather simple pulse-width modulation (PWM) interface to more complex interfaces like CAN (Controller Area Network). Even though these interfaces are tethered by definition, a wireless realization is highly welcome in many applications to reduce cable and connector cost, increase the flexibility and realize new emerging applications like wireless control systems. Currently used wireless solutions like Bluetooth, WirelessHART or IO-Link Wireless use dedicated communication standards and corresponding higher protocol layers to realize the wireless communication. Due to the complexity of the communication and the protocol handling, additional latency and jitter are introduced to the data communication that can meet the requirements for many applications. Even though tunnelling of other bus data like CAN data is generally also possible the latency and jitter prevent the tunnelling from being transparent for the bus system. Therefore a new basic technology based on dual-mode radio is used to realize a wireless communication on the physical layer only, enabling a reliable and real-time data transfer. As this system operates on the physical layer it is independent of any higher layers of the OSI (open systems interconnection) model. Hence it can be used for several different communication systems to replace the tethered physical layer. A prototype is developed and tested for real-time wireless PWM, SENT (single-edge nibble transmission) and CAN data transfer with very low latency and jitter.},
  language  = {en}
}
@article{Huening2019,
  author    = {H{\"u}ning, Felix},
  title     = {Nachr{\"u}stm{\"o}glichkeiten von Dieselfahrzeugen aus technischer Sicht},
  series = {Zeitschrift f{\"u}r Verkehrsrecht : NZV},
  journal   = {Zeitschrift f{\"u}r Verkehrsrecht : NZV},
  number    = {1},
  publisher = {C.H.Beck},
  pages     = {27 -- 32},
  year      = {2019},
  language  = {de}
}
@article{HeinrichsUttingFrauenrathetal.2009,
  author    = {Heinrichs, Uwe and Utting, Jane F. and Frauenrath, Tobias and Hezel, Fabian and Krombach, Gabriele A. and Hodenius, Michael A. J. and Kozerke, Sebastian and Niendorf, Thoralf},
  title     = {Myocardial T2 mapping free of distortion using susceptibility-weighted fast spin-echo imaging: A feasibility study at 1.5 T and 3.0 T},
  series = {Magnetic Resonance in Medicine},
  volume    = {62},
  journal   = {Magnetic Resonance in Medicine},
  number    = {3},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.22054},
  pages     = {822 -- 828},
  year      = {2009},
  abstract  = {This study demonstrates the feasibility of applying free-breathing, cardiac-gated, susceptibility-weighted fast spin-echo imaging together with black blood preparation and navigator-gated respiratory motion compensation for anatomically accurate T₂ mapping of the heart. First, T₂ maps are presented for oil phantoms without and with respiratory motion emulation (T₂ = (22.1 ± 1.7) ms at 1.5 T and T₂ = (22.65 ± 0.89) ms at 3.0 T). T₂ relaxometry of a ferrofluid revealed relaxivities of R2 = (477.9 ± 17) mM⁻¹s⁻¹ and R2 = (449.6 ± 13) mM⁻¹s⁻¹ for UFLARE and multiecho gradient-echo imaging at 1.5 T. For inferoseptal myocardial regions mean T₂ values of 29.9 ± 6.6 ms (1.5 T) and 22.3 ± 4.8 ms (3.0 T) were estimated. For posterior myocardial areas close to the vena cava T₂-values of 24.0 ± 6.4 ms (1.5 T) and 15.4 ± 1.8 ms (3.0 T) were observed. The merits and limitations of the proposed approach are discussed and its implications for cardiac and vascular T₂-mapping are considered.},
  language  = {en}
}
@article{WolfAltgen2013,
  author    = {Wolf, Martin R. and Altgen, Jannik},
  title     = {IT Service Management in der Region Aachen : White Paper},
  pages     = {1 -- 13},
  year      = {2013},
  language  = {de}
}
@article{FerreinMeyer2012,
  author    = {Ferrein, Alexander and Meyer, Thomas},
  title     = {A Brief Overview of Artificial Intelligence in South Africa},
  series = {AI Magazine},
  volume    = {33},
  journal   = {AI Magazine},
  number    = {1},
  publisher = {AAAI},
  address   = {Menlo Park},
  issn      = {0738-4602},
  doi       = {10.1609/aimag.v33i1.2357},
  pages     = {99 -- 101},
  year      = {2012},
  abstract  = {South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@article{FrauenrathHezelRenzetal.2010,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Renz, Wolfgang and de Geyer d'Orth, Thibaut and Dieringer, Matthias and von Knobelsdorf-Brenkenhoff, Florian and Prothmann, Marcel and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Acoustic cardiac triggering: a practical solution for synchronization and gating of cardiovascular magnetic resonance at 7 Tesla},
  series = {Journal of Cardiovascular Magnetic Resonance},
  volume    = {12},
  journal   = {Journal of Cardiovascular Magnetic Resonance},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1532-429X},
  doi       = {10.1186/1532-429X-12-67},
  year      = {2010},
  abstract  = {Background To demonstrate the applicability of acoustic cardiac triggering (ACT) for imaging of the heart at ultrahigh magnetic fields (7.0 T) by comparing phonocardiogram, conventional vector electrocardiogram (ECG) and traditional pulse oximetry (POX) triggered 2D CINE acquisitions together with (i) a qualitative image quality analysis, (ii) an assessment of the left ventricular function parameter and (iii) an examination of trigger reliability and trigger detection variance derived from the signal waveforms. Results ECG was susceptible to severe distortions at 7.0 T. POX and ACT provided waveforms free of interferences from electromagnetic fields or from magneto-hydrodynamic effects. Frequent R-wave mis-registration occurred in ECG-triggered acquisitions with a failure rate of up to 30\% resulting in cardiac motion induced artifacts. ACT and POX triggering produced images free of cardiac motion artefacts. ECG showed a severe jitter in the R-wave detection. POX also showed a trigger jitter of approximately Δt = 72 ms which is equivalent to two cardiac phases. ACT showed a jitter of approximately Δt = 5 ms only. ECG waveforms revealed a standard deviation for the cardiac trigger offset larger than that observed for ACT or POX waveforms. Image quality assessment showed that ACT substantially improved image quality as compared to ECG (image quality score at end-diastole: ECG = 1.7 ± 0.5, ACT = 2.4 ± 0.5, p = 0.04) while the comparison between ECG vs. POX gated acquisitions showed no significant differences in image quality (image quality score: ECG = 1.7 ± 0.5, POX = 2.0 ± 0.5, p = 0.34). Conclusions The applicability of acoustic triggering for cardiac CINE imaging at 7.0 T was demonstrated. ACT's trigger reliability and fidelity are superior to that of ECG and POX. ACT promises to be beneficial for cardiovascular magnetic resonance at ultra-high field strengths including 7.0 T.},
  language  = {en}
}
@article{MartinFrauenrathOezerdemetal.2011,
  author    = {Martin, Conrad and Frauenrath, Tobias and {\"O}zerdem, Celal and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {Development and evaluation of a small and mobile Magneto Alert Sensor (MALSE) to support safety requirements for magnetic resonance imaging},
  series = {European Radiology},
  volume    = {21},
  journal   = {European Radiology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-011-2153-z},
  pages     = {2187 -- 2192},
  year      = {2011},
  abstract  = {Objective The purpose of this study is to (i) design a small and mobile Magnetic field ALert SEnsor (MALSE), (ii) to carefully evaluate its sensors to their consistency of activation/deactivation and sensitivity to magnetic fields, and (iii) to demonstrate the applicability of MALSE in 1.5 T, 3.0 T and 7.0 T MR fringe field environments. Methods MALSE comprises a set of reed sensors, which activate in response to their exposure to a magnetic field. The activation/deactivation of reed sensors was examined by moving them in/out of the fringe field generated by 7TMR. Results The consistency with which individual reed sensors would activate at the same field strength was found to be 100\% for the setup used. All of the reed switches investigated required a substantial drop in ambient magnetic field strength before they deactivated. Conclusions MALSE is a simple concept for alerting MRI staff to a ferromagnetic object being brought into fringe magnetic fields which exceeds MALSEs activation magnetic field. MALSE can easily be attached to ferromagnetic objects within the vicinity of a scanner, thus creating a barrier for hazardous situations induced by ferromagnetic parts which should not enter the vicinity of an MR-system to occur.},
  language  = {en}
}
@article{RitzPisarczykSachtlebenetal.2014,
  author    = {Ritz, Thomas and Pisarczyk, Rafael and Sachtleben, Johanna and Leßenich, Nina},
  title     = {Usability Engineering maßgeschneidert : Modellbaukasten zur Entwicklung gebrauchstauglicher mobiler Software},
  series = {Wissenschaft trifft Praxis},
  volume    = {1},
  journal   = {Wissenschaft trifft Praxis},
  number    = {1},
  publisher = {Begleitforschung Mittelstand-Digital c/o WIK-Consult GmbH},
  address   = {Bad Honnef},
  issn      = {2198-8544 (Print)},
  pages     = {79 -- 88},
  year      = {2014},
  language  = {de}
}
@article{WallenbornRitz2014,
  author    = {Wallenborn, Ramona and Ritz, Thomas},
  title     = {Mobilit{\"a}t miteinander teilen : st{\"a}dtisches eCarsharing in einer vernetzten Gesellschaft ; [vernetztes Fahren von morgen]},
  series = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  volume    = {5},
  journal   = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  number    = {14 (Herbstausg.)},
  publisher = {Bundesverband eMobilit{\"a}t BEM},
  address   = {Berlin},
  issn      = {2191-5636},
  pages     = {92 -- 95},
  year      = {2014},
  language  = {de}
}
@article{DieringerRenzLindeletal.2011,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz D. and Seifert, Frank and Frauenrath, Tobias and von Knobelsdorf-Brenkenhoff, Florian and Waiczies, Helmar and Hoffmann, Werner and Rieger, Jan and Pfeiffer, Harald and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Design and application of a four-channel transmit/receive surface coil for functional cardiac imaging at 7T},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {33},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {3},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22451},
  pages     = {736 -- 741},
  year      = {2011},
  abstract  = {Purpose To design and evaluate a four-channel cardiac transceiver coil array for functional cardiac imaging at 7T. Materials and Methods A four-element cardiac transceiver surface coil array was developed with two rectangular loops mounted on an anterior former and two rectangular loops on a posterior former. specific absorption rate (SAR) simulations were performed and a Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-1 calibration method was applied prior to obtain 2D FLASH CINE (mSENSE, R = 2) images from nine healthy volunteers with a spatial resolution of up to 1 × 1 × 2.5 mm3. Results Tuning and matching was found to be better than 10 dB for all subjects. The decoupling (S21) was measured to be >18 dB between neighboring loops, >20 dB for opposite loops, and >30 dB for other loop combinations. SAR values were well within the limits provided by the IEC. Imaging provided clinically acceptable signal homogeneity with an excellent blood-myocardium contrast applying the Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-2 calibration approach. Conclusion A four-channel cardiac transceiver coil array for 7T was built, allowing for cardiac imaging with clinically acceptable signal homogeneity and an excellent blood-myocardium contrast. Minor anatomic structures, such as pericardium, mitral, and tricuspid valves and their apparatus, as well as trabeculae, were accurately delineated.},
  language  = {en}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@article{FrauenrathFuchsDieringeretal.2012,
  author    = {Frauenrath, Tobias and Fuchs, Katharina and Dieringer, Matthias A. and {\"O}zerdem, Celal and Patel, Nishan and Renz, Wolfgang and Greiser, Andreas and Elgeti, Thomas and Niendorf, Thoralf},
  title     = {Detailing the use of magnetohydrodynamic effects for synchronization of MRI with the cardiac cycle: A feasibility study},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {36},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {2},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.23634},
  pages     = {364 -- 372},
  year      = {2012},
  abstract  = {Purpose: To investigate the feasibility of using magnetohydrodynamic (MHD) effects for synchronization of magnetic resonance imaging (MRI) with the cardiac cycle. Materials and Methods: The MHD effect was scrutinized using a pulsatile flow phantom at B0 = 7.0 T. MHD effects were examined in vivo in healthy volunteers (n = 10) for B0 ranging from 0.05-7.0 T. Noncontrast-enhanced MR angiography (MRA) of the carotids was performed using a gated steady-state free-precession (SSFP) imaging technique in conjunction with electrocardiogram (ECG) and MHD synchronization. Results: The MHD potential correlates with flow velocities derived from phase contrast MRI. MHD voltages depend on the orientation between B0 and the flow of a conductive fluid. An increase in the interelectrode spacing along the flow increases the MHD potential. In vivo measurement of the MHD effect provides peak voltages of 1.5 mV for surface areas close to the common carotid artery at B0 = 7.0 T. Synchronization of MRI with the cardiac cycle using MHD triggering is feasible. MHD triggered MRA of the carotids at 3.0 T showed an overall image quality and richness of anatomic detail, which is comparable to ECG-triggered MRAs. Conclusion: This feasibility study demonstrates the use of MHD effects for synchronization of MR acquisitions with the cardiac cycle. J. Magn. Reson. Imaging 2012;36:364-372. © 2012 Wiley Periodicals, Inc.},
  language  = {en}
}
@article{GraesslRenzHezeletal.2013,
  author    = {Gr{\"a}ßl, Andreas and Renz, Wolfgang and Hezel, Fabian and Dieringer, Matthias A. and Winter, Lukas and {\"O}zerdem, Celal and Rieger, Jan and Kellmann, Peter and Santoro, Davide and Lindel, Tomasz D. and Frauenrath, Tobias and Pfeiffer, Harald and Niendorf, Thoralf},
  title     = {Modular 32-channel transceiver coil array for cardiac MRI at 7.0T},
  series = {Magnetic Resonance in Medicine},
  volume    = {72},
  journal   = {Magnetic Resonance in Medicine},
  number    = {1},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.24903},
  pages     = {276 -- 290},
  year      = {2013},
  abstract  = {Purpose To design and evaluate a modular transceiver coil array with 32 independent channels for cardiac MRI at 7.0T. Methods The modular coil array comprises eight independent building blocks, each containing four transceiver loop elements. Numerical simulations were used for B1+ field homogenization and radiofrequency (RF) safety validation. RF characteristics were examined in a phantom study. The array's suitability for accelerated high spatial resolution two-dimensional (2D) FLASH CINE imaging of the heart was examined in a volunteer study. Results Transmission field adjustments and RF characteristics were found to be suitable for the volunteer study. The signal-to-noise intrinsic to 7.0T together with the coil performance afforded a spatial resolution of 1.1 × 1.1 × 2.5 mm3 for 2D CINE FLASH MRI, which is by a factor of 6 superior to standardized CINE protocols used in clinical practice at 1.5T. The 32-channel transceiver array supports one-dimensional acceleration factors of up to R = 4 without impairing image quality significantly. Conclusion The modular 32-channel transceiver cardiac array supports accelerated and high spatial resolution cardiac MRI. The array is compatible with multichannel transmission and provides a technological basis for future clinical assessment of parallel transmission techniques at 7.0T.},
  language  = {en}
}
@article{SchwarteHeinolBuxbaumetal.1998,
  author    = {Schwarte, Rudolf and Heinol, Horst-Guenther and Buxbaum, Bernd and Xu, Zhanping and Ringbeck, Thorsten and [u.a.],},
  title     = {Neuartige 3D-Visionssysteme auf der Basis Layout-optimierter PMD-Strukturen},
  series = {Technisches Messen : tm ; Plattform f{\"u}r Methoden, Systeme und Anwendungen der Messtechnik ; Organ der AMA (Fachverband f{\"u}r Sensorik e.V.) und der NAMUR (Interessengemeinschaft Prozessleittechnik der Chemischen und Pharmazeutischen Industrie). - 65(1998), H. 7-8},
  journal   = {Technisches Messen : tm ; Plattform f{\"u}r Methoden, Systeme und Anwendungen der Messtechnik ; Organ der AMA (Fachverband f{\"u}r Sensorik e.V.) und der NAMUR (Interessengemeinschaft Prozessleittechnik der Chemischen und Pharmazeutischen Industrie). - 65(1998), H. 7-8},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen},
  issn      = {0340-837X},
  pages     = {264 -- 271},
  year      = {1998},
  language  = {de}
}
@article{BragardBragard2012,
  author    = {Bragard, G. and Bragard, Michael},
  title     = {Ein kosteng{\"u}nstiges, universelles Modellbauinterface},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {65},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {5},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {290 -- 293},
  year      = {2012},
  abstract  = {Wir stellen einen USB-Baustein vor, der eine kosteng{\"u}nstige und universelle M{\"o}glichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalit{\"a}t orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen L{\"o}sungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir {\"u}ber ein Beispiel aus dem Unterrichtseinsatz.},
  language  = {de}
}
@article{DroopChenRadfordetal.2023,
  author    = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia},
  title     = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy},
  series = {Radiochimica Acta},
  volume    = {111},
  journal   = {Radiochimica Acta},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Berlin [u.a.]},
  issn      = {2193-3405},
  doi       = {10.1515/ract-2023-0144},
  pages     = {773 -- 779},
  year      = {2023},
  abstract  = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).},
  language  = {en}
}
@article{HeuermannHillebrandSadeghfam2008,
  author    = {Heuermann, Holger and Hillebrand, J{\"u}rgen and Sadeghfam, Arash},
  title     = {Novel Concept of a Digital SigmaDelta-PLL-Phase-Shift-Modulator / Hillebrand, J{\"u}rgen ; Sadeghfam, Arash ; Heuermann, Holger},
  isbn      = {978-3-8007-3086-5},
  pages     = {123 -- 126},
  year      = {2008},
  language  = {en}
}
@article{FerreinSteinbauerMcPhillipsetal.2007,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Potgieter, Anet},
  title     = {Establishing the RoboCup Standard League in Africa - applying for the RoboCup Standard League with a German-Austrian-South African Research Project},
  pages     = {1 -- 5},
  year      = {2007},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {LNN (Line-Network-Network): Verfahren zur Kalibrierung von Netzwerkanalysatoren},
  series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 36. 1992 (1992)},
  journal   = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 36. 1992 (1992)},
  pages     = {327 -- 335},
  year      = {1992},
  language  = {en}
}
@article{RitzEllerweg2008,
  author    = {Ritz, Thomas and Ellerweg, Roland},
  title     = {Benutzerzentrierte Entwicklung mobiler Unternehmenssoftware, Teil 2 : die Iterative Entwicklung},
  series = {dot.net-magazin},
  volume    = {2008},
  journal   = {dot.net-magazin},
  number    = {12},
  issn      = {1619-7933},
  year      = {2008},
  language  = {de}
}
@article{FerreinFritzLakemeyer2005,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {Using Golog for Deliberation and Team Coordination in Robotic Soccer / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {K{\"u}nstliche Intelligenz : KI. 19 (2005), H. 1},
  journal   = {K{\"u}nstliche Intelligenz : KI. 19 (2005), H. 1},
  isbn      = {0933-1875},
  pages     = {24 -- 30},
  year      = {2005},
  language  = {en}
}
@article{SchifferFerrein2018,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {ERIKA—Early Robotics Introduction at Kindergarten Age},
  series = {Multimodal Technologies Interact},
  volume    = {2},
  journal   = {Multimodal Technologies Interact},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2414-4088},
  doi       = {10.3390/mti2040064},
  pages     = {15},
  year      = {2018},
  abstract  = {In this work, we report on our attempt to design and implement an early introduction to basic robotics principles for children at kindergarten age. One of the main challenges of this effort is to explain complex robotics contents in a way that pre-school children could follow the basic principles and ideas using examples from their world of experience. What sets apart our effort from other work is that part of the lecturing is actually done by a robot itself and that a quiz at the end of the lesson is done using robots as well. The humanoid robot Pepper from Softbank, which is a great platform for human-robot interaction experiments, was used to present a lecture on robotics by reading out the contents to the children making use of its speech synthesis capability. A quiz in a Runaround-game-show style after the lecture activated the children to recap the contents they acquired about how mobile robots work in principle. In this quiz, two LEGO Mindstorm EV3 robots were used to implement a strongly interactive scenario. Besides the thrill of being exposed to a mobile robot that would also react to the children, they were very excited and at the same time very concentrated. We got very positive feedback from the children as well as from their educators. To the best of our knowledge, this is one of only few attempts to use a robot like Pepper not as a tele-teaching tool, but as the teacher itself in order to engage pre-school children with complex robotics contents.},
  language  = {en}
}
@article{HoltrupSadeghfamHeuermannetal.2014,
  author    = {Holtrup, S. and Sadeghfam, Arash and Heuermann, Holger and Awakowicz, P.},
  title     = {Characterization and optimization technique for microwave-driven high-intensity discharge lamps using hot S-parameters},
  series = {IEEE transactions on microwave theories and techniques},
  volume    = {62},
  journal   = {IEEE transactions on microwave theories and techniques},
  number    = {10},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-9480},
  doi       = {10.1109/TMTT.2014.2342652},
  pages     = {2471 -- 2480},
  year      = {2014},
  abstract  = {High-intensity discharge lamps can be driven by radio-frequency signals in the ISM frequency band at 2.45 GHz, using a matching network to transform the impedance of the plasma to the source impedance. To achieve an optimal operating condition, a good characterization of the lamp in terms of radio frequency equivalent circuits under operating conditions is necessary, enabling the design of an efficient matching network. This paper presents the characterization technique for such lamps and presents the design of the required matching network. For the characterization, a high-intensity discharge lamp was driven by a monofrequent large signal at 2.45 GHz, whereas a frequency sweep over 300 MHz was performed across this signal to measure so-called small-signal hot S-parameters using a vector network analyzer. These parameters are then used as an equivalent load in a circuit simulator to design an appropriate matching network. Using the measured data as a black-box model in the simulation results in a quick and efficient method to simulate and design efficient matching networks in spite of the complex plasma behavior. Furthermore, photometric analysis of high-intensity discharge lamps are carried out, comparing microwave operation to conventional operation.},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Mass Customized Production of Information Services - The combination of economies-of-scale with economies-of-scope},
  series = {Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard},
  journal   = {Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ [u.a.]},
  isbn      = {0-8058-4165-2},
  pages     = {267 S. : graph. Darst.},
  year      = {2002},
  language  = {en}
}
@article{NiemuellerFerreinBecketal.2010,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Design Principles of the Component-Based Robot Software Framework Fawkes},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  journal   = {Simulation, Modeling, and Programming for Autonomous Robots},
  pages     = {300 -- 311},
  year      = {2010},
  language  = {en}
}
@article{FerreinSteinbauer2010,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {On the Way to High-Level Programming for Resource-Limited Embedded Systems with Golog},
  series = {Simulation, Modeling, and Programming for Autonomous Robots},
  journal   = {Simulation, Modeling, and Programming for Autonomous Robots},
  pages     = {229 -- 240},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2},
  journal   = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2},
  isbn      = {1610-1987},
  pages     = {175 -- 178},
  year      = {2010},
  language  = {en}
}
@article{HeuermannErkens2005,
  author    = {Heuermann, Holger and Erkens, H.},
  title     = {EVM- und BER-optimierter differentieller Einseitenbandmodulator / Erkens, H., Heuermann, H.},
  series = {German Microwave Conference - GeMiC 2005 - : conference proceedings ; University of Ulm, April 5 - 7, 2005 [Elektronische Ressource] / ed.: Wolfgang Menzel. IMA, VDE ...},
  journal   = {German Microwave Conference - GeMiC 2005 - : conference proceedings ; University of Ulm, April 5 - 7, 2005 [Elektronische Ressource] / ed.: Wolfgang Menzel. IMA, VDE ...},
  publisher = {Univ},
  address   = {Ulm},
  isbn      = {3-00-015423-X},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {de}
}
@article{RitzEllerweg2008,
  author    = {Ritz, Thomas and Ellerweg, Roland},
  title     = {Benutzerzentrierte Entwicklung mobiler Unternehmenssoftware, Teil 1},
  series = {dot.NET-Magazin},
  volume    = {2008},
  journal   = {dot.NET-Magazin},
  number    = {11},
  issn      = {1619-7933},
  year      = {2008},
  language  = {de}
}
@article{HeuermannIbrahim2008,
  author    = {Heuermann, Holger and Ibrahim, Irfan},
  title     = {Novel theory and architecture of a vector signal generator implemented with two PLLs / Ibrahim, Irfan ; Heuermann, Holger},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {85 -- 88},
  year      = {2008},
  language  = {en}
}
@article{Heuermann2008,
  author    = {Heuermann, Holger},
  title     = {Dual mode radio: A new tranceiver architecture for UWB and 60 GHz-applications},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {147 -- 150},
  year      = {2008},
  language  = {en}
}
@article{BeckBuchleitnerFerreinetal.2014,
  author    = {Beck, Daniel and Buchleitner, Martin and Ferrein, Alexander and Niem{\"u}ller, Tim and Steinbauer, Gerald},
  title     = {Mostly Harmless \& AllemaniACs - mixed innovations},
  pages     = {1 -- 8},
  year      = {2014},
  language  = {en}
}
@article{WolfArmbrusterSchlicketal.1997,
  author    = {Wolf, Martin R. and Armbruster, S. and Schlick, Christopher and Simon, S.},
  title     = {Markt{\"u}bersicht Telekooperationssysteme / Wolf, M.; Armbruster, S.; Schlick, C.; Simon, S.},
  series = {Elsa Insight (1997)},
  journal   = {Elsa Insight (1997)},
  publisher = {-},
  pages     = {8 -- 9},
  year      = {1997},
  language  = {de}
}
@article{FerreinDyllaLakemeyer2002,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard},
  title     = {Acting and Deliberating using Golog in Robotic Soccer - A Hybrid Architecture / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)},
  journal   = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)},
  pages     = {1 -- 7},
  year      = {2002},
  language  = {en}
}
@article{WolfBiesenGreeb2014,
  author    = {Wolf, Martin R. and Biesen, Ina van der and Greeb, Birgit},
  title     = {Mein Freund, die Uni},
  series = {Die neue Hochschule : DNH : f{\"u}r anwendungsbezogene Wissenschaft und Kunst},
  volume    = {2014},
  journal   = {Die neue Hochschule : DNH : f{\"u}r anwendungsbezogene Wissenschaft und Kunst},
  number    = {2},
  publisher = {HLB},
  address   = {Bonn},
  issn      = {0340-448X},
  pages     = {54 -- 56},
  year      = {2014},
  language  = {de}
}
@article{Ferrein2008,
  author    = {Ferrein, Alexander},
  title     = {Logic-based robot control in highly dynamic domains / Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Robotics and Autonomous Systems. 56 (2008), H. 11},
  journal   = {Robotics and Autonomous Systems. 56 (2008), H. 11},
  isbn      = {0921-8890},
  pages     = {980 -- 991},
  year      = {2008},
  language  = {en}
}
@article{Heuermann1997,
  author    = {Heuermann, Holger},
  title     = {Leerl{\"a}ufe als postulierte Kalibrierstandards fuer Messungen auf planaren Schaltungen},
  series = {tm - Technisches Messen. 64. 1997 (1997), H. 6},
  journal   = {tm - Technisches Messen. 64. 1997 (1997), H. 6},
  pages     = {230 -- 237},
  year      = {1997},
  language  = {de}
}
@article{KoenigWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.},
  title     = {GHOST: An Evaluated Competence Developing Game for Cybersecurity Awareness Training},
  series = {International Journal on Advances in Security},
  volume    = {11},
  journal   = {International Journal on Advances in Security},
  number    = {3 \& 4},
  publisher = {IARIA Journals},
  issn      = {1942-2636},
  pages     = {274 -- 287},
  year      = {2018},
  abstract  = {To train end users how to interact with digital systems is indispensable to ensure a strong computer security. 'Competence Developing Game'-based approaches are particularly suitable for this purpose because of their motivation-and simulation-aspects. In this paper the Competence Developing Game 'GHOST' for cybersecurity awareness trainings and its underlying patterns are described. Accordingly, requirements for an 'Competence Developing Game' based training are discussed. Based on these requirements it is shown how a game can fulfill these requirements. A supplementary game interaction design and a corresponding evaluation study is shown. The combination of training requirements and interaction design is used to create a 'Competence Developing Game'-based training concept. A part of these concept is implemented into a playable prototype that serves around one hour of play respectively training time. This prototype is used to perform an evaluation of the game and training aspects of the awareness training. Thereby, the quality of the game aspect and the effectiveness of the training aspect are shown.},
  language  = {en}
}
@article{FerreinSteinbauerMcPhillipsetal.2008,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and McPhillips, Graeme and Potgieter, Anet},
  title     = {RoboCup Standard Platform League - Team Zadeat : an intercontinental research effort},
  pages     = {1 -- 7},
  year      = {2008},
  language  = {en}
}
@article{WolfFoltzLuczaketal.2000,
  author    = {Wolf, Martin R. and Foltz, Christian and Luczak, Holger and Eggersmann, M.},
  title     = {Entwurf eines Referenzszenarios zur Analyse und Gestaltung von Entwicklungsprozessen in der verfahrenstechnischen Industrie / Foltz, C.; Wolf, M.; Luczak, H.; Eggersmann, M.; Schneider, R.; Marquardt, W.},
  series = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  journal   = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  publisher = {GfA-Press},
  address   = {Dortmund},
  isbn      = {3-9806222-5-8},
  pages     = {545 -- 548},
  year      = {2000},
  language  = {de}
}
@article{FerreinKonurLakemeyer2004,
  author    = {Ferrein, Alexander and Konur, Savas and Lakemeyer, Gerhard},
  title     = {Learning Decision Trees for Action Selection in Soccer Agents / Konur, Savas ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  pages     = {1 -- 7},
  year      = {2004},
  language  = {en}
}
@article{Ferrein2005,
  author    = {Ferrein, Alexander},
  title     = {Specifying Soccer Moves with Golog},
  series = {Book of abstracts : Cologne, 15 - 17 September 2004 / 1st International Working Conference IT and Sport \& 5th conference DVS-Section Computer Science in Sport},
  journal   = {Book of abstracts : Cologne, 15 - 17 September 2004 / 1st International Working Conference IT and Sport \& 5th conference DVS-Section Computer Science in Sport},
  publisher = {German Sport Univ.},
  address   = {K{\"o}ln},
  isbn      = {3-00-014576-1},
  pages     = {161 -- 165},
  year      = {2005},
  language  = {en}
}
@article{SchoppDollGraeseretal.2016,
  author    = {Schopp, Christoph and Doll, Timo and Gr{\"a}ser, Ulrich and Harzheim, Thomas and Heuermann, Holger and Kling, Rainer and Marso, Michael},
  title     = {Capacitively Coupled High-Pressure Lamp Using Coaxial Line Networks},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  volume    = {64},
  journal   = {IEEE Transactions on Microwave Theory and Techniques},
  number    = {10},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {0018-9480},
  doi       = {10.1109/TMTT.2016.2600326},
  pages     = {3363 -- 3368},
  year      = {2016},
  abstract  = {This paper describes the development of a capacitively coupled high-pressure lamp with input power between 20 and 43 W at 2.45 GHz, using a coaxial line network. Compared with other electrodeless lamp systems, no cavity has to be used and a reduction in the input power is achieved. Therefore, this lamp is an alternative to the halogen incandescent lamp for domestic lighting. To serve the demands of domestic lighting, the filling of the lamp is optimized over all other resulting requirements, such as high efficacy at low induced powers and fast startups. A workflow to develop RF-driven plasma applications is presented, which makes use of the hot S-parameter technique. Descriptions of the fitting process inside a circuit and FEM simulator are given. Results of the combined ignition and operation network from simulations and measurements are compared. An initial prototype is built and measurements of the lamp's lighting properties are presented along with an investigation of the efficacy optimizations using large signal amplitude modulation. With this lamp, an efficacy of 135 lmW -1 is achieved.},
  language  = {en}
}
@article{HeuermannSchiek1997,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Line Network Network (LNN): an alternative in-fixture calibration procedure},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 45 (1997), H. 3},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 45 (1997), H. 3},
  isbn      = {0018-9480},
  pages     = {408 -- 413},
  year      = {1997},
  language  = {en}
}
@article{HeuermannPetersSchmitzetal.2005,
  author    = {Heuermann, Holger and Peters, N. and Schmitz, T. and Sadeghfam, Arash},
  title     = {Concept of Balanced Antennas with Load-Invariant Base Impedance Using a Two Element LC-Coupler. Peters, N., Schmitz, Th., Sadeghfam, A., Heuermann, H.},
  series = {Proceedings of the European microwave association : journal of the European microwave association},
  journal   = {Proceedings of the European microwave association : journal of the European microwave association},
  publisher = {PLUS},
  address   = {Pisa},
  pages     = {117 -- 122},
  year      = {2005},
  language  = {en}
}
@article{FoltzSchneiderWolfetal.2008,
  author    = {Foltz, Christian and Schneider, Nicole and Wolf, Martin R. and Kausch, Bernhard and Schlick, Christopher and Luczak, Holger},
  title     = {Usability engineering},
  series = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  journal   = {Collaborative and distributed chemical engineering : from understanding to substantial design process support; results of the IMPROVE Project. - (Lecture notes in computer science ; 4970)},
  editor    = {Nagl, Manfred},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70552-9},
  doi       = {10.1007/978-3-540-70552-9_21},
  pages     = {527 -- 554},
  year      = {2008},
  language  = {en}
}
@article{FerreinBeckLakemeyer2007,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {A Simulation Environment for Middle-Size Robots with Multi-level Abstraction / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2007: Robot Soccer World Cup XI},
  journal   = {RoboCup 2007: Robot Soccer World Cup XI},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68846-4},
  pages     = {136 -- 147},
  year      = {2007},
  language  = {en}
}
@article{HeuermannSadeghfam2007,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {On the design of multimode integrated circuits in multilayered processes / Sadeghfam, A. ; Heuermann, H.},
  series = {European Microwave Conference, 2007, 9-12 Oct. 2007},
  journal   = {European Microwave Conference, 2007, 9-12 Oct. 2007},
  isbn      = {978-2-87487-001-9},
  pages     = {516 -- 519},
  year      = {2007},
  language  = {en}
}
@article{FerreinJacobsSchifferetal.2009,
  author    = {Ferrein, Alexander and Jacobs, Stefan and Schiffer, Stefan and Beck, Daniel},
  title     = {Robust Collision Avoidance in Unknown Domestic Environments / Jacobs, Stefan ; Ferrein, Alexander ; Schiffer, Stefan ; Beck, Daniel ; Lakemeyer, Gerhard},
  series = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII},
  journal   = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {116 -- 127},
  year      = {2009},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2005,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Towards a League-Independent Qualitative Soccer Theory for RoboCup / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Stolzenburg, Frieder ; Visser, Ubbo},
  series = {RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).},
  journal   = {RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-25046-8},
  pages     = {611 -- 618},
  year      = {2005},
  language  = {en}
}
@article{HeuermannGraf1998,
  author    = {Heuermann, Holger and Graf, W.},
  title     = {Direkte on-wafer-Messung des Wellenwiderstandes einer Mikrostreifenleitung},
  series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 41. 1998 (1998)},
  journal   = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 41. 1998 (1998)},
  year      = {1998},
  language  = {de}
}
@article{RoepkeKoehlerDruryetal.2020,
  author    = {Roepke, Rene and K{\"o}hler, Klemens and Drury, Vincent and Schroeder, Ulrik and Wolf, Martin R. and Meyer, Ulrike},
  title     = {A pond full of phishing games - analysis of learning games for anti-phishing education},
  series = {Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020},
  journal   = {Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-62433-0},
  doi       = {10.1007/978-3-030-62433-0_32020},
  pages     = {41 -- 60},
  year      = {2020},
  abstract  = {Game-based learning is a promising approach to anti-phishing education, as it fosters motivation and can help reduce the perceived difficulty of the educational material. Over the years, several prototypes for game-based applications have been proposed, that follow different approaches in content selection, presentation, and game mechanics. In this paper, a literature and product review of existing learning games is presented. Based on research papers and accessible applications, an in-depth analysis was conducted, encompassing target groups, educational contexts, learning goals based on Bloom's Revised Taxonomy, and learning content. As a result of this review, we created the publications on games (POG) data set for the domain of anti-phishing education. While there are games that can convey factual and conceptual knowledge, we find that most games are either unavailable, fail to convey procedural knowledge or lack technical depth. Thus, we identify potential areas of improvement for games suitable for end-users in informal learning contexts.},
  language  = {en}
}
@article{SchoppRohrbachLangeretal.2024,
  author    = {Schopp, Christoph and Rohrbach, Felix and Langer, Luc and Heuermann, Holger},
  title     = {Detection of welding wire length by active S11 measurement},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3356659},
  pages     = {1 -- 6},
  year      = {2024},
  abstract  = {A novel method to determine the extruded length of a metallic wire for a directed energy deposition (DED) process using a microwave (MW) plasma jet with a straight-through wire feed is presented. The method is based on the relative comparison of the measured frequency response obtained by the large-signal scattering parameter (Hot-S) technique. In the practical working range, repeatability of less than 6\% for a nonactive plasma and 9\% for the active plasma state is found. Measurements are conducted with a focus on a simple solution to decrease the processing time and reduce the integration time of the process into the existing hardware. It is shown that monitoring a single frequency for magnitude and phase changes is sufficient to achieve good accuracy. A combination of different measurement values to determine the length is possible. The applicability to different diameter of the same material is shown as well as a contact detection of the wire and metallic substrate.},
  language  = {en}
}
@article{HeuermannSchiek1993,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Procedures for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  isbn      = {0018-9456},
  pages     = {528 -- 531},
  year      = {1993},
  language  = {en}
}
@article{FerreinBeckLakemeyer2009,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Landmark-Based Representations for Navigating Holonomic Soccer Robots / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  journal   = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-642-02921-9},
  pages     = {25 -- 36},
  year      = {2009},
  language  = {en}
}
@article{HeuermannGraf1997,
  author    = {Heuermann, Holger and Graf, W.},
  title     = {Direkte Messung der Dispersion des Wellenwiderstandes einer Mikrostreifenleitung},
  series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 40. 1997 (1997)},
  journal   = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 40. 1997 (1997)},
  year      = {1997},
  language  = {de}
}
@article{HeuermannSadeghfam2008,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Electrically tunable bandpass filter with integrated carrier suppression for UHF RFID systems / Sadeghfam, Arash ; Heuermann, Holger},
  series = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  journal   = {European Conference on Wireless Technology, 2008. EuWiT 2008.},
  isbn      = {978-2-87487-008-8},
  pages     = {306 -- 309},
  year      = {2008},
  language  = {en}
}
@article{Heuermann2008,
  author    = {Heuermann, Holger},
  title     = {Calibration of a Network Analyzer Without a Thru Connection for Nonlinear and Multiport Measurements},
  series = {IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1},
  journal   = {IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1},
  isbn      = {0018-9480},
  pages     = {2505 -- 2510},
  year      = {2008},
  language  = {en}
}
@article{HeuermannThalayasingam2009,
  author    = {Heuermann, Holger and Thalayasingam, K.},
  title     = {Novel vector non-linear measurement system for intermodulation measurements / Thalayasingam, K.; Heuermann, H.},
  series = {European Microwave Conference, 2009 : EuMC 2009 ; Sept. 29, 2009 - Oct. 1, 2009, Rome, Italy ; part of European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association ... Endorsed by IEEE},
  journal   = {European Microwave Conference, 2009 : EuMC 2009 ; Sept. 29, 2009 - Oct. 1, 2009, Rome, Italy ; part of European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association ... Endorsed by IEEE},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-4748-0},
  pages     = {926 -- 929},
  year      = {2009},
  language  = {en}
}
@article{RitzStender2006,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Modeling of B2B mobile commerce processes},
  series = {International Journal of Production Economics},
  volume    = {101},
  journal   = {International Journal of Production Economics},
  number    = {1},
  issn      = {0925-5273},
  doi       = {10.1016/j.ijpe.2005.05.017},
  pages     = {128 -- 139},
  year      = {2006},
  language  = {en}
}
@article{WolfFoltzSchlicketal.1999,
  author    = {Wolf, Martin R. and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Groupware support for chemical process design / Wolf, M.; Foltz, C.; Schlick, C.; Luczak, H.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {343 -- 347},
  year      = {1999},
  language  = {en}
}
@article{WolfSimonSchlick1997,
  author    = {Wolf, Martin R. and Simon, S. and Schlick, Christopher},
  title     = {Computergest{\"u}tzte Kooperation - Eine Seifenblase? / Wolf, M.; Simon, S.; Schlick, C.},
  series = {Rechnergest{\"u}tzte Kooperation in Verwaltungen und großen Unternehmen : Tagungsband zum Workshop der GI-Gachgruppe / Peter Mambrey ... ( Hrsg.)},
  journal   = {Rechnergest{\"u}tzte Kooperation in Verwaltungen und großen Unternehmen : Tagungsband zum Workshop der GI-Gachgruppe / Peter Mambrey ... ( Hrsg.)},
  publisher = {Univ., Fachbereich Mathematik u. Informatik},
  address   = {Essen},
  pages     = {220 -- 234},
  year      = {1997},
  language  = {de}
}
@article{RitzHoof2002,
  author    = {Ritz, Thomas and Hoof, Antonius J. M.},
  title     = {Personalisierung von Content basierten Services - Produktion von personalisierten Informationsdienstleistungen},
  series = {Content Management : digitale Inhalte als Bausteine einer vernetzten Welt ; 18. Juni 2002, Stuttgart / Innovationsforum. Veranst. Verein zur F{\"o}rderung Produktionstechnischer Forschung e.V., Stuttgart. [Fraunhofer-Institut Arbeitswirtschaft und Organisatio},
  journal   = {Content Management : digitale Inhalte als Bausteine einer vernetzten Welt ; 18. Juni 2002, Stuttgart / Innovationsforum. Veranst. Verein zur F{\"o}rderung Produktionstechnischer Forschung e.V., Stuttgart. [Fraunhofer-Institut Arbeitswirtschaft und Organisatio},
  publisher = {Fraunhofer-IRB-Verl.},
  address   = {Stuttgart},
  isbn      = {3-8167-6155-0},
  pages     = {91 -- 106},
  year      = {2002},
  language  = {de}
}
@article{HeuermannSadeghfamBoehm2005,
  author    = {Heuermann, Holger and Sadeghfam, Arash and Boehm, H.},
  title     = {Ultra Compact Multi-Mode Filter with Novel Rat-Race Inductor. Sadeghfam, Arash; Heuermann, Holger; Boehm, H.},
  series = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  journal   = {Conference proceedings : 3 - 7 October 2005, CNIT la D{\´e}fense, Paris, France; [comprises the] 35th European Microwave Conference 2005 ; The European Conference on Wireless Technology 2005 ; European Radar Conference 2005 ; GAAS 2005, The European Gallium A. Vol. 2},
  publisher = {Horizon House Publ},
  address   = {London},
  isbn      = {2-9600551-0-1},
  pages     = {4 pp.},
  year      = {2005},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2010,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  series = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  journal   = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  pages     = {1 -- 10},
  year      = {2010},
  language  = {en}
}
@article{HeuermannSchiek1993,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {LNN( Line-Network-Network): The In-Fixture Calibration Procedure},
  pages     = {149 -- 149},
  year      = {1993},
  language  = {en}
}
@article{HeuermannSchiek1992,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {A Generalization of the Txx Network Analyzer Self-Calibration Procedure},
  series = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  journal   = {Conference proceedings : monday 24th to thursday 27th august 1992, Helsinki University of Technology, Espoo, Finland ; [the international conference and exhibition designed for the Microwave Community]. Vol. 2},
  publisher = {Microwave Exhibitions and Publishers},
  address   = {Tunbridge Wells},
  isbn      = {0-946821-77-1},
  pages     = {907 -- 912},
  year      = {1992},
  language  = {en}
}
@article{HeuermannSchiek1997,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {15-term self-calibration methods for the error-correction of on-wafer measurements},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 46 (1997), H. 5},
  isbn      = {0018-9456},
  pages     = {1105 -- 1110},
  year      = {1997},
  language  = {en}
}
@article{WolfLuczakSpringeretal.1997,
  author    = {Wolf, Martin R. and Luczak, Holger and Springer, J. and Simon, S.},
  title     = {The role of metaphors in computer supported cooperative work},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {191 -- 192},
  year      = {1997},
  language  = {en}
}
@article{Ferrein2004,
  author    = {Ferrein, Alexander},
  title     = {Planwirtschaft},
  series = {Linux Magazin (2004)},
  journal   = {Linux Magazin (2004)},
  isbn      = {1432-640X},
  pages     = {50 -- 53},
  year      = {2004},
  language  = {de}
}
@article{SteinbauerFerrein2016,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {20 Years of RoboCup},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {30},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-016-0442-z},
  pages     = {221 -- 224},
  year      = {2016},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin R. and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Entwicklung und Evaluation eines groupware-basierten Unterst{\"u}tzungssystems f{\"u}r verfahrenstechnische Entwickler / Wolf, M.; Foltz, C.; Schlick, C.; Luczak, H.},
  series = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  journal   = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  publisher = {GfA-Press},
  address   = {Dortmund},
  isbn      = {3-9806222-5-8},
  pages     = {95 -- 98},
  year      = {2000},
  language  = {de}
}
@article{FerreinFritzLakemeyer2003,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {Extending DTGOLOG with Options / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  journal   = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  pages     = {1391 -- 1393},
  year      = {2003},
  language  = {en}
}
@article{Heuermann1999,
  author    = {Heuermann, Holger},
  title     = {Calibration procedures with series impedances and unknown lines simplify on-wafer measurements},
  series = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  journal   = {IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1},
  isbn      = {0018-9480},
  pages     = {1 -- 5},
  year      = {1999},
  language  = {en}
}
@article{HeuermannSchiek1995,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Error corrected impedance measurements with a network analyzer},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 44 (1995), H. 2},
  isbn      = {0018-9456},
  pages     = {295 -- 299},
  year      = {1995},
  language  = {en}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin R. and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@article{Ritz2002,
  author    = {Ritz, Thomas},
  title     = {Personalized Information Services: Production and Distribution of these Services employing Mass-Customization},
  year      = {2002},
  language  = {en}
}
@article{HeuermannSchiek1991,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Robuster Algorithmus zur Streuparameterbestimmung f{\"u}r systemfehlerkorrigierte Netzwerkanalysatoren},
  series = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 35. 1991 (1991)},
  journal   = {Kleinheubacher Berichte : Vortr{\"a}ge und Berichte der gemeinsamen Tagung des U.R.S.I.-Landesausschusses in der Bundesrepublik Deutschland / Hrsg.: Deutsche Telekom AG. 35. 1991 (1991)},
  pages     = {555 -- 556},
  year      = {1991},
  language  = {de}
}
@article{WolfFoltzKillichetal.2001,
  author    = {Wolf, Martin R. and Foltz, Christian and Killich, Stephan and Schmidt, Ludger},
  title     = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger},
  series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  journal   = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  publisher = {-},
  isbn      = {0-8058-3608-X},
  pages     = {172 -- 176},
  year      = {2001},
  language  = {en}
}
@article{HeuermannSadeghfam2004,
  author    = {Heuermann, Holger and Sadeghfam, Arash},
  title     = {Novel balanced inductor for compact differential systems / Sadeghfam, Arash; Heuermann, Holger},
  series = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association},
  journal   = {Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association},
  publisher = {Horizon House Publ.},
  address   = {London},
  isbn      = {1-580-53992-0},
  pages     = {709 -- 712},
  year      = {2004},
  language  = {en}
}
@article{HeuermannSchiek1994,
  author    = {Heuermann, Holger and Schiek, Burkhard},
  title     = {Error Corrected Impedance Measurements with a Network Analyzer},
  pages     = {125 -- 126},
  year      = {1994},
  language  = {en}
}
@article{NiemuellerFerreinEckeletal.2011,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Eckel, Gerhard and Pirro, David and Podbregar, Patrick and Kellner, Tobias and Rath, Christoph and Steinbauer, Gerald},
  title     = {Providing Ground-truth Data for the Nao Robot Platform},
  series = {RoboCup 2010: Robot Soccer World Cup XIV},
  journal   = {RoboCup 2010: Robot Soccer World Cup XIV},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-20217-9},
  pages     = {133 -- 144},
  year      = {2011},
  language  = {en}
}
@article{GrandeMeffertSchoenbergeretal.2012,
  author    = {Grande, Marion and Meffert, Elisabeth and Schoenberger, Eva and Jung, Stefanie and Frauenrath, Tobias and Huber, Walter and Hussmann, Katja and Moormann, Mareike and Heim, Stefan},
  title     = {From a concept to a word in a syntactically complete sentence: An fMRI study on spontaneous language production in an overt picture description task},
  series = {NeuroImage},
  volume    = {61},
  journal   = {NeuroImage},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1522-2586},
  doi       = {10.1016/j.neuroimage.2012.03.087},
  pages     = {702 -- 714},
  year      = {2012},
  abstract  = {Spontaneous language has rarely been subjected to neuroimaging studies. This study therefore introduces a newly developed method for the analysis of linguistic phenomena observed in continuous language production during fMRI. Most neuroimaging studies investigating language have so far focussed on single word or — to a smaller extent — sentence processing, mostly due to methodological considerations. Natural language production, however, is far more than the mere combination of words to larger units. Therefore, the present study aimed at relating brain activation to linguistic phenomena like word-finding difficulties or syntactic completeness in a continuous language fMRI paradigm. A picture description task with special constraints was used to provoke hesitation phenomena and speech errors. The transcribed speech sample was segmented into events of one second and each event was assigned to one category of a complex schema especially developed for this purpose. The main results were: conceptual planning engages bilateral activation of the precuneus. Successful lexical retrieval is accompanied - particularly in comparison to unsolved word-finding difficulties - by the left middle and superior temporal gyrus. Syntactic completeness is reflected in activation of the left inferior frontal gyrus (IFG) (area 44). In sum, the method has proven to be useful for investigating the neural correlates of lexical and syntactic phenomena in an overt picture description task. This opens up new prospects for the analysis of spontaneous language production during fMRI.},
  language  = {en}
}
@article{BragardConradvanHoeketal.2011,
  author    = {Bragard, Michael and Conrad, M. and van Hoek, H. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off},
  series = {IEEE transactions on industry applications},
  volume    = {47},
  journal   = {IEEE transactions on industry applications},
  number    = {5},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0093-9994},
  doi       = {10.1109/TIA.2011.2161432},
  pages     = {2175 -- 2182},
  year      = {2011},
  language  = {en}
}
@article{KobFrauenrath2009,
  author    = {Kob, Malte and Frauenrath, Tobias},
  title     = {A system for parallel measurement of glottis opening and larynx position},
  series = {Biomedical Signal Processing and Control},
  volume    = {4},
  journal   = {Biomedical Signal Processing and Control},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1746-8108},
  doi       = {10.1016/j.bspc.2009.03.004},
  pages     = {221 -- 228},
  year      = {2009},
  abstract  = {The simultaneous assessment of glottal dynamics and larynx position can be beneficial for the diagnosis of disordered voice or speech production and swallowing. Up to now, methods either concentrate on assessment of the glottis opening using optical, acoustical or electrical (electroglottography, EGG) methods, or on visualisation of the larynx position using ultrasound, computer tomography or magnetic resonance imaging techniques. The method presented here makes use of a time-multiplex measurement approach of space-resolved transfer impedances through the larynx. The fast sequence of measurements allows a quasi simultaneous assessment of both larynx position and EGG signal using up to 32 transmit-receive signal paths. The system assesses the dynamic opening status of the glottis as well as the vertical and back/forward motion of the larynx. Two electrode-arrays are used for the measurement of the electrical transfer impedance through the neck in different directions. From the acquired data the global and individual conductivity is calculated as well as a 2D point spatial representation of the minimum impedance. The position information is shown together with classical EGG signals allowing a synchronous visual assessment of glottal area and larynx position. A first application to singing voice analysis is presented that indicate a high potential of the method for use as a non-invasive tool in the diagnosis of voice, speech, and swallowing disorders.},
  language  = {en}
}
@article{WiegnerVolkerMainzetal.2023,
  author    = {Wiegner, Jonas and Volker, Hanno and Mainz, Fabian and Backes, Andreas and Loeken, Michael and H{\"u}ning, Felix},
  title     = {Energy analysis of a wireless sensor node powered by a Wiegand sensor},
  series = {Journal of Sensors and Sensor Systems (JSSS)},
  volume    = {12},
  journal   = {Journal of Sensors and Sensor Systems (JSSS)},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-12-85-2023},
  pages     = {85 -- 92},
  year      = {2023},
  abstract  = {This article describes an Internet of things (IoT) sensing device with a wireless interface which is powered by the energy-harvesting method of the Wiegand effect. The Wiegand effect, in contrast to continuous sources like photovoltaic or thermal harvesters, provides small amounts of energy discontinuously in pulsed mode. To enable an energy-self-sufficient operation of the sensing device with this pulsed energy source, the output energy of the Wiegand generator is maximized. This energy is used to power up the system and to acquire and process data like position, temperature or other resistively measurable quantities as well as transmit these data via an ultra-low-power ultra-wideband (UWB) data transmitter. A proof-of-concept system was built to prove the feasibility of the approach. The energy consumption of the system during start-up was analysed, traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof of concept, an application prototype was developed.},
  language  = {en}
}
@article{KlingeOttoMuehl2015,
  author    = {Klinge, Uwe and Otto, Jens and M{\"u}hl, Thomas},
  title     = {High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain},
  series = {BioMed Research International},
  volume    = {2015},
  journal   = {BioMed Research International},
  issn      = {2314-6133 (Print)},
  doi       = {10.1155/2015/953209},
  pages     = {7 pages},
  year      = {2015},
  language  = {en}
}
@article{FrauenrathNiendorfKob2008,
  author    = {Frauenrath, Tobias and Niendorf, Thoralf and Kob, Malte},
  title     = {Acoustic method for synchronization of Magnetic Resonance Imaging (MRI)},
  series = {Acta Acustica},
  volume    = {94},
  journal   = {Acta Acustica},
  number    = {1},
  publisher = {Hirzel},
  address   = {Stuttgart},
  issn      = {1861-9959},
  doi       = {10.3813/AAA.918017},
  pages     = {148 -- 155},
  year      = {2008},
  abstract  = {Magnetic Resonance Imaging (MRI) of moving organs requires synchronization with physiological motion or flow, which dictate the viable window for data acquisition. To meet this challenge, this study proposes an acoustic gating device (ACG) that employs acquisition and processing of acoustic signals for synchronization while providing MRI compatibility, immunity to interferences with electro-magnetic and acoustic fields and suitability for MRI at high magnetic field strengths. The applicability and robustness of the acoustic gating approach is examined in a pilot study, where it substitutes conventional ECG-gating for cardiovascular MR. The merits and limitations of the ACG approach are discussed. Implications for MR imaging in the presence of physiological motion are considered including synchronization with other structure- or motion borne sounds.},
  language  = {en}
}
@article{ClaerFerreinSchiffer2019,
  author    = {Claer, Mario and Ferrein, Alexander and Schiffer, Stefan},
  title     = {Calibration of a Rotating or Revolving Platform with a LiDAR Sensor},
  series = {Applied Sciences},
  volume    = {Volume 9},
  journal   = {Applied Sciences},
  number    = {issue 11, 2238},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app9112238},
  pages     = {18 Seiten},
  year      = {2019},
  language  = {en}
}
@article{BragardSoltauThomasetal.2010,
  author    = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.},
  title     = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems},
  series = {IEEE transactions on power electronics},
  volume    = {25},
  journal   = {IEEE transactions on power electronics},
  number    = {12},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2010.2085455},
  pages     = {3049 -- 3056},
  year      = {2010},
  abstract  = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.},
  language  = {en}
}