@article{AbelKahmannMellonetal.2020,
  author    = {Abel, Alexander and Kahmann, Stephanie Lucina and Mellon, Stephen and Staat, Manfred and Jung, Alexander},
  title     = {An open-source tool for the validation of finite element models using three-dimensional full-field measurements},
  series = {Medical Engineering \& Physics},
  volume    = {77},
  journal   = {Medical Engineering \& Physics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  doi       = {10.1016/j.medengphy.2019.10.015},
  pages     = {125 -- 129},
  year      = {2020},
  abstract  = {Three-dimensional (3D) full-field measurements provide a comprehensive and accurate validation of finite element (FE) models. For the validation, the result of the model and measurements are compared based on two respective point-sets and this requires the point-sets to be registered in one coordinate system. Point-set registration is a non-convex optimization problem that has widely been solved by the ordinary iterative closest point algorithm. However, this approach necessitates a good initialization without which it easily returns a local optimum, i.e. an erroneous registration. The globally optimal iterative closest point (Go-ICP) algorithm has overcome this drawback and forms the basis for the presented open-source tool that can be used for the validation of FE models using 3D full-field measurements. The capability of the tool is demonstrated using an application example from the field of biomechanics. Methodological problems that arise in real-world data and the respective implemented solution approaches are discussed.},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2014,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and Br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars-Peter and Rittweger, J{\"o}rn},
  title     = {A novel optical approach for assessing in vivo bone segment deformation and its application in muscle-bone relationship studies in humans},
  series = {Journal of Orthopaedic Translation},
  volume    = {2},
  journal   = {Journal of Orthopaedic Translation},
  number    = {4},
  publisher = {Elsevier},
  address   = {Singapore},
  issn      = {2214-0328},
  doi       = {10.1016/j.jot.2014.07.078},
  pages     = {238 -- 238},
  year      = {2014},
  language  = {en}
}
@article{MeyerGaalenLeschingeretal.2019,
  author    = {Meyer, Carolin and Gaalen, Kerstin van and Leschinger, Tim and Scheyerer, Max J. and Neiss, Wolfram F. and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement},
  series = {BioMed Research International},
  journal   = {BioMed Research International},
  doi       = {10.1155/2019/9232813},
  pages     = {Article ID 9232813},
  year      = {2019},
  language  = {en}
}
@article{HacklBuessKammerlohretal.2021,
  author    = {Hackl, Michael and Buess, Eduard and Kammerlohr, Sandra and Nacov, Julia and Staat, Manfred and Leschinger, Tim and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {A "comma sign"-directed subscapularis repair in anterosuperior rotator cuff tears yields biomechanical advantages in a cadaveric model},
  series = {The american journal of sports medicine},
  volume    = {49},
  journal   = {The american journal of sports medicine},
  number    = {12},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211031506},
  pages     = {3212 -- 3217},
  year      = {2021},
  abstract  = {Background: Additional stabilization of the "comma sign" in anterosuperior rotator cuff repair has been proposed to provide biomechanical benefits regarding stability of the repair. Purpose: This in vitro investigation aimed to investigate the influence of a comma sign-directed reconstruction technique for anterosuperior rotator cuff tears on the primary stability of the subscapularis tendon repair. Study Design: Controlled laboratory study. Methods: A total of 18 fresh-frozen cadaveric shoulders were used in this study. Anterosuperior rotator cuff tears (complete full-thickness tear of the supraspinatus and subscapularis tendons) were created, and supraspinatus repair was performed with a standard suture bridge technique. The subscapularis was repaired with either a (1) single-row or (2) comma sign technique. A high-resolution 3D camera system was used to analyze 3-mm and 5-mm gap formation at the subscapularis tendon-bone interface upon incremental cyclic loading. Moreover, the ultimate failure load of the repair was recorded. A Mann-Whitney test was used to assess significant differences between the 2 groups. Results: The comma sign repair withstood significantly more loading cycles than the single-row repair until 3-mm and 5-mm gap formation occurred (P≤ .047). The ultimate failure load did not reveal any significant differences when the 2 techniques were compared (P = .596). Conclusion: The results of this study show that additional stabilization of the comma sign enhanced the primary stability of subscapularis tendon repair in anterosuperior rotator cuff tears. Although this stabilization did not seem to influence the ultimate failure load, it effectively decreased the micromotion at the tendon-bone interface during cyclic loading. Clinical Relevance: The proposed technique for stabilization of the comma sign has shown superior biomechanical properties in comparison with a single-row repair and might thus improve tendon healing. Further clinical research will be necessary to determine its influence on the functional outcome.},
  language  = {en}
}
@article{RauschHarbrechtKahmannetal.2020,
  author    = {Rausch, Valentin and Harbrecht, Andreas and Kahmann, Stephanie Lucina and Fenten, Thomas and Jovanovic, Nebojsa and Hackl, Michael and M{\"u}ller, Lars-Peter and Staat, Manfred and Wegmann, Kilian},
  title     = {Osteosynthesis of Phalangeal Fractures: Biomechanical Comparison of Kirschner Wires, Plates, and Compression Screws},
  series = {The Journal of Hand Surgery},
  volume    = {45},
  journal   = {The Journal of Hand Surgery},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0363-5023},
  doi       = {10.1016/j.jhsa.2020.04.010},
  pages     = {987.e1 -- 987.e8},
  year      = {2020},
  abstract  = {Purpose The aim of this study was to compare several osteosynthesis techniques (intramedullary headless compression screws, T-plates, and Kirschner wires) for distal epiphyseal fractures of proximal phalanges in a human cadaveric model. Methods A total of 90 proximal phalanges from 30 specimens (index, ring, and middle fingers) were used for this study. After stripping off all soft tissue, a transverse distal epiphyseal fracture was simulated at the proximal phalanx. The 30 specimens were randomly assigned to 1 fixation technique (30 per technique), either a 3.0-mm intramedullary headless compression screw, locking plate fixation with a 2.0-mm T-plate, or 2 oblique 1.0-mm Kirschner wires. Displacement analysis (bending, distraction, and torsion) was performed using optical tracking of an applied random speckle pattern after osteosynthesis. Biomechanical testing was performed with increasing cyclic loading and with cyclic load to failure using a biaxial torsion-tension testing machine. Results Cannulated intramedullary compression screws showed significantly less displacement at the fracture site in torsional testing. Furthermore, screws were significantly more stable in bending testing. Kirschner wires were significantly less stable than plating or screw fixation in any cyclic load to failure test setup. Conclusions Intramedullary compression screws are a highly stable alternative in the treatment of transverse distal epiphyseal phalangeal fractures. Kirschner wires seem to be inferior regarding displacement properties and primary stability. Clinical relevance Fracture fixation of phalangeal fractures using plate osteosynthesis may have the advantage of a very rigid reduction, but disadvantages such as stiffness owing to the more invasive surgical approach and soft tissue irritation should be taken into account. Headless compression screws represent a minimally invasive choice for fixation with good biomechanical properties.},
  language  = {en}
}
@article{HacklMuellerStaatetal.2016,
  author    = {Hackl, Michael and M{\"u}ller, Lars-Peter and Staat, Manfred and Kahmann, Stephanie Lucina and Wegmann, Kilian},
  title     = {Proximal phalangeal neck fractures of the hand — a biomechanical comparison of three fixation techniques},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {148 -- 149},
  year      = {2016},
  abstract  = {Plate osteosynthesis of displaced proximal phalangeal neck fractures of the hand allows early mobilization due to a stable internal fixation. Nevertheless, joint stiffness—because of soft tissue irritation—represents a common complication leading to high complication rates. Del Pinal et al. recently reported promising clinical results for a new, minimally invasive fixation technique with a cannulated headless intramedullary compression screw. Hence, the aim of this study was to compare plate fixation of proximal phalangeal neck fractures to less two less invasive techniques: Crossed k-wire fixation and intramedullary screw fixation. We hypothesized that these fixation techniques provide inferior stability when compared to plate osteosynthesis.},
  language  = {en}
}
@article{HacklWegmannKahmannetal.2017,
  author    = {Hackl, Michael and Wegmann, Kilian and Kahmann, Stephanie Lucina and Heinze, Nicolai and Staat, Manfred and Neiss, Wolfram F. and Scaal, Martin and M{\"u}ller, Lars-Peter},
  title     = {Radial shortening osteotomy reduces radiocapitellar contact pressures while preserving valgus stability of the elbow},
  series = {Knee Surgery, Sports Traumatology, Arthroscopy},
  volume    = {25},
  journal   = {Knee Surgery, Sports Traumatology, Arthroscopy},
  number    = {7},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1433-7347},
  doi       = {10.1007/s00167-017-4468-z},
  pages     = {2280 -- 2288},
  year      = {2017},
  language  = {en}
}
@article{HacklNacovKammerlohretal.2021,
  author    = {Hackl, Michael and Nacov, Julia and Kammerlohr, Sandra and Staat, Manfred and Buess, Eduard and Leschinger, Tim and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure},
  series = {The American Journal of Sports Medicine},
  volume    = {49},
  journal   = {The American Journal of Sports Medicine},
  number    = {7},
  publisher = {Sage},
  address   = {London},
  issn      = {1552-3365},
  doi       = {10.1177/03635465211006138},
  pages     = {1847 -- 1853},
  year      = {2021},
  language  = {en}
}
@article{HacklMayerWeberetal.2017,
  author    = {Hackl, Michael and Mayer, Katharina and Weber, Mareike and Staat, Manfred and van Riet, Roger and Burkhart, Klau Josef and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Plate osteosynthesis of proximal ulna fractures : a biomechanical micromotion analysis},
  series = {The journal of hand surgery},
  volume    = {42},
  journal   = {The journal of hand surgery},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0363-5023},
  doi       = {10.1016/j.jhsa.2017.05.014},
  pages     = {834.e1 -- 834.e7},
  year      = {2017},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2015,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and Br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars-Peter and Rittweger, J{\"o}rn},
  title     = {On the relationship between tibia torsional deformation and regional muscle contractions in habitual human exercises in vivo},
  series = {Journal of Biomechanics},
  volume    = {48},
  journal   = {Journal of Biomechanics},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2014.12.031},
  pages     = {456 -- 464},
  year      = {2015},
  language  = {en}
}
@article{LenzKahmannBehbahanietal.2022,
  author    = {Lenz, Maximilian and Kahmann, Stephanie Lucina and Behbahani, Mehdi and Pennig, Lenhard and Hackl, Michael and Leschinger, Tim and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Influence of rotator cuff preload on fracture configuration in proximal humerus fractures: a proof of concept for fracture simulation},
  series = {Archives of Orthopaedic and Trauma Surgery},
  journal   = {Archives of Orthopaedic and Trauma Surgery},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1434-3916},
  doi       = {10.1007/s00402-022-04471-9},
  year      = {2022},
  abstract  = {Introduction In regard of surgical training, the reproducible simulation of life-like proximal humerus fractures in human cadaveric specimens is desirable. The aim of the present study was to develop a technique that allows simulation of realistic proximal humerus fractures and to analyse the influence of rotator cuff preload on the generated lesions in regards of fracture configuration. Materials and methods Ten cadaveric specimens (6 left, 4 right) were fractured using a custom-made drop-test bench, in two groups. Five specimens were fractured without rotator cuff preload, while the other five were fractured with the tendons of the rotator cuff preloaded with 2 kg each. The humeral shaft and the shortened scapula were potted. The humerus was positioned at 90° of abduction and 10° of internal rotation to simulate a fall on the elevated arm. In two specimens of each group, the emergence of the fractures was documented with high-speed video imaging. Pre-fracture radiographs were taken to evaluate the deltoid-tuberosity index as a measure of bone density. Post-fracture X-rays and CT scans were performed to define the exact fracture configurations. Neer's classification was used to analyse the fractures. Results In all ten cadaveric specimens life-like proximal humerus fractures were achieved. Two III-part and three IV-part fractures resulted in each group. The preloading of the rotator cuff muscles had no further influence on the fracture configuration. High-speed videos of the fracture simulation revealed identical fracture mechanisms for both groups. We observed a two-step fracture mechanism, with initial impaction of the head segment against the glenoid followed by fracturing of the head and the tuberosities and then with further impaction of the shaft against the acromion, which lead to separation of the tuberosities. Conclusion A high energetic axial impulse can reliably induce realistic proximal humerus fractures in cadaveric specimens. The preload of the rotator cuff muscles had no influence on initial fracture configuration. Therefore, fracture simulation in the proximal humerus is less elaborate. Using the presented technique, pre-fractured specimens are available for real-life surgical education.},
  language  = {en}
}
@article{RauschKahmannBaltschunetal.2020,
  author    = {Rausch, Valentin and Kahmann, Stephanie Lucina and Baltschun, Christoph and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Pressure distribution to the distal biceps tendon at the radial tuberosity: a biomechanical study},
  series = {The Journal of Hand Surgery},
  volume    = {45},
  journal   = {The Journal of Hand Surgery},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0363-5023},
  doi       = {10.1016/j.jhsa.2020.01.006},
  pages     = {776.e1 -- 776.e9},
  year      = {2020},
  abstract  = {Purpose Mechanical impingement at the narrow radioulnar space of the tuberosity is believed to be an etiological factor in the injury of the distal biceps tendon. The aim of the study was to compare the pressure distribution at the proximal radioulnar space between 2 fixation techniques and the intact state. Methods Six right arms and 6 left arms from 5 female and 6 male frozen specimens were used for this study. A pressure transducer was introduced at the height of the radial tuberosity with the intact distal biceps tendon and after 2 fixation methods: the suture-anchor and the cortical button technique. The force (N), maximum pressure (kPa) applied to the radial tuberosity, and the contact area (mm²) of the radial tuberosity with the ulna were measured and differences from the intact tendon were detected from 60° supination to 60° pronation in 15° increments with the elbow in full extension and in 45° and 90° flexion of the elbow. Results With the distal biceps tendon intact, the pressures during pronation were similar regardless of extension and flexion and were the highest at 60° pronation with 90° elbow flexion (23.3 ± 53.5 kPa). After repair of the tendon, the mean peak pressure, contact area, and total force showed an increase regardless of the fixation technique. Highest peak pressures were found using the cortical button technique at 45° flexion of the elbow and 60° pronation. These differences were significantly different from the intact tendon. The contact area was significantly larger in full extension and 15°, 30°, and 60° pronation using the cortical button technique. Conclusions Pressures on the distal biceps tendon at the radial tuberosity increase during pronation, especially after repair of the tendon. Clinical relevance Mechanical impingement could play a role in both the etiology of primary distal biceps tendon ruptures and the complications occurring after fixation of the tendon using certain techniques.},
  language  = {en}
}
@article{HacklKahmannWegmannetal.2016,
  author    = {Hackl, Michael and Kahmann, Stephanie Lucina and Wegmann, Kilian and Ries, Christian and Staat, Manfred and M{\"u}ller, Lars-Peter},
  title     = {Shortening osteotomy of the proximal radius — a treatment option for isolated osteoarthritis of the lateral column of the elbow joint?},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {128 -- 129},
  year      = {2016},
  abstract  = {Treatment of posttraumatic osteoarthritis of the radial column of the elbow joint remains a challenging yet common issue. While partial joint replacement leads to high revision rates, radial head excision has shown to severely increase joint instability. Shortening osteotomy of the radius could be an option to decrease the contact pressure of the radiohumeral joint and thereby pain levels without causing valgus instability. Hence, the aim of this biomechanical study was to evaluate the effects of radial shortening on axial load distribution and valgus stability of the elbow joint.},
  language  = {en}
}
@article{WegmannHacklStaatetal.2016,
  author    = {Wegmann, Kilian and Hackl, Michael and Staat, Manfred and Mayer, Katharina and M{\"u}ller, Lars-Peter},
  title     = {Double plate osteosynthesis of proximal ulna fractures: biomechanical and clinical results},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4079-0},
  pages     = {58 -- 59},
  year      = {2016},
  abstract  = {While plate fixation of proximal ulna fractures might lead to superior clinical results compared to tension band wiring, regular plates represent an established risk factor for wound complications. The olecranon double plates (Medartis, Basel, CH) might decrease complications related to the osteosynthesis because of their low profile and better anatomical fit. This study aimed to evaluate the biomechanical performance and clinical results of the olecranon double plates.},
  language  = {en}
}
@article{HacklLeschingerStaatetal.2016,
  author    = {Hackl, Michael and Leschinger, T. and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Reconstruction of the interosseous membrane in the Essex Lopresti lesion — a biomechanical evaluation},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {130 -- 131},
  year      = {2016},
  abstract  = {Surgical reconstruction of the interosseous membrane (IOM) could restore longitudinal forearm stability to avoid persisting disability due to capituloradial and ulnocarpal impingement in Essex Lopresti lesions. This biomechanical study aimed to assess longitudinal forearm stability of intact specimens, after sectioning of the IOM and after reconstruction with a TightRope construct using either a single or double bundle technique.},
  language  = {en}
}
@article{HacklAndermahrStaatetal.2017,
  author    = {Hackl, Michael and Andermahr, J. and Staat, Manfred and Bremer, I. and Borggrefe, J. and Prescher, A. and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Suture button reconstruction of the central band of the interosseous membrane in Essex-Lopresti lesions: a comparative biomechanical investigation},
  series = {The Journal of Hand Surgery (European Volume)},
  volume    = {42},
  journal   = {The Journal of Hand Surgery (European Volume)},
  number    = {4},
  publisher = {Sage},
  address   = {London},
  issn      = {2043-6289 (Online)},
  doi       = {10.1177/1753193416665943},
  pages     = {370 -- 376},
  year      = {2017},
  language  = {en}
}
@article{LeschingerBirgelHackletal.2019,
  author    = {Leschinger, Tim and Birgel, Stefan and Hackl, Michael and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair},
  series = {Computer Methods in Biomechanics and Biomedical Engineering},
  journal   = {Computer Methods in Biomechanics and Biomedical Engineering},
  number    = {Early view},
  publisher = {Taylor \& Francis},
  address   = {London},
  doi       = {10.1080/10255842.2019.1572749},
  year      = {2019},
  language  = {en}
}
@article{LeschingerBeschAydinetal.2019,
  author    = {Leschinger, Tim and Besch, Katharina and Aydin, Cansu and Staat, Manfred and Scaal, Martin and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique},
  series = {The Orthopaedic Journal of Sports Medicine},
  volume    = {7},
  journal   = {The Orthopaedic Journal of Sports Medicine},
  number    = {8},
  doi       = {10.1177/2325967119864590},
  pages     = {1 -- 5},
  year      = {2019},
  language  = {en}
}
@article{BabilonWilbringTappertetal.2018,
  author    = {Babilon, Katharina and Wilbring, Daniela and Tappert, Tim and Pfaff, Raphael and Enning, Manfred},
  title     = {Schienenfahrzeugtechnik hands on - FH Aachen IMechE Railway Challenge},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  publisher = {Public Verlag},
  address   = {Bingen},
  issn      = {1868-5919},
  pages     = {20 -- 22},
  year      = {2018},
  language  = {de}
}
@article{PfaffEnningSutter2022,
  author    = {Pfaff, Raphael and Enning, Manfred and Sutter, Stefan},
  title     = {A risk‑based approach to automatic brake tests for rail freight service: incident analysis and realisation concept},
  series = {SN Applied Sciences},
  volume    = {4},
  journal   = {SN Applied Sciences},
  number    = {4},
  publisher = {Springer},
  address   = {Cham},
  issn      = {2523-3971},
  doi       = {10.1007/s42452-022-05007-x},
  pages     = {1 -- 14},
  year      = {2022},
  abstract  = {This study reviews the practice of brake tests in freight railways, which is time consuming and not suitable to detect certain failure types. Public incident reports are analysed to derive a reasonable brake test hardware and communication architecture, which aims to provide automatic brake tests at lower cost than current solutions. The proposed solutions relies exclusively on brake pipe and brake cylinder pressure sensors, a brake release position switch as well as radio communication via standard protocols. The approach is embedded in the Wagon 4.0 concept, which is a holistic approach to a smart freight wagon. The reduction of manual processes yields a strong incentive due to high savings in manual labour and increased productivity.},
  language  = {en}
}
@article{SchmidtEnningPfaff2018,
  author    = {Schmidt, Bernd and Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge Teil 3: Einf{\"u}hrungsszenarien f{\"u}r aktive, kommunikative G{\"u}terwagen},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {67},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {60 -- 64},
  year      = {2018},
  abstract  = {Wenn durch innovative, automatisierte G{\"u}terwagen betriebswirtschaftliche Vorteile nutzbar gemacht werden sollen, muss die Migration auf das neue System in sinnvollen Teilschritten unter Ber{\"u}cksichtigung der organisationellen und betrieblichen Vereinbarkeit vorgenommen werden. Eine stufenweise Migration mit Nachr{\"u}stbarkeit und Kompatibilit{\"a}t kann die optimale Ausstattungsvariante f{\"u}r die unterschiedlichen Betriebsszenarien sowie eine Steigerung der Wirtschaftlichkeit des Gesamtsystems bieten.},
  language  = {de}
}
@article{PfaffBabilon2023,
  author    = {Pfaff, Raphael and Babilon, Katharina},
  title     = {Railway Challenge - moderne Auflage der Rainhill Trials?},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {2023},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {4},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {55 -- 58},
  year      = {2023},
  abstract  = {Die IMechE Railway Challenge wird j{\"a}hrlich in Stapleford, Großbritannien ausgetragen. Im Rahmen der Challenge entwickeln und bauen Studierende eine Lokomotive und vergleichen sich in verschiedenen Disziplinen, darunter eine automatisierte Zielbremsung, optimale Energier{\"u}ckgewinnung beim Bremsen und minimale Ger{\"a}uschemissionen. Neben diesen und weiteren technischen Wettbewerbsdisziplinen treten die Fahrzeuge und die Teams auch in nicht-technischen Disziplinen wie einer Business Case Challenge an.},
  language  = {de}
}
@article{PfaffGidaszewskiSchmidt2020,
  author    = {Pfaff, Raphael and Gidaszewski, Lars and Schmidt, Bernd},
  title     = {Ber{\"u}cksichtigung von No Fault Found im Diagnose- und Instandhaltungssystem von Schienenfahrzeugen},
  series = {ETR - Eisenbahntechnische Rundschau},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {56 -- 59},
  year      = {2020},
  abstract  = {Intermittierende und nicht reproduzierbare Fehler, auch als No Fault Found bezeichnet, treten in praktisch allen Bereichen auf und sorgen f{\"u}r hohe Kosten. Diese sind h{\"a}ufig auf unpr{\"a}zise Fehlerbeschreibungen zur{\"u}ckzuf{\"u}hren. Im vorliegenden Beitrag werden Anpassungen der Vorgehensweise bei der Entwicklung und Anpassungen des Diagnosesystems vorgeschlagen.},
  language  = {de}
}
@article{SchollPalmLehmannetal.1998,
  author    = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas Martin and Spitzer, Klaus},
  title     = {Quantitative Farbmessung in laryngoskopischen Bildern. Palm, C; Scholl, I; Lehmann, TM; Spitzer, K.},
  series = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...},
  journal   = {Bildverarbeitung f{\"u}r die Medizin 1998. Hrsg.: Thomas Lehmann ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63885-7},
  pages     = {412 -- 416},
  year      = {1998},
  language  = {en}
}
@article{FiedlerLaddBitz2017,
  author    = {Fiedler, Thomas M. and Ladd, Mark E. and Bitz, Andreas},
  title     = {RF safety assessment of a bilateral four-channel transmit/receive 7 Tesla breast coil: SAR versus temperature limits},
  series = {Medical Physics},
  volume    = {44},
  journal   = {Medical Physics},
  number    = {1},
  doi       = {10.1002/mp.12034},
  pages     = {143 -- 157},
  year      = {2017},
  language  = {en}
}
@article{FiedlerLaddClemensetal.2020,
  author    = {Fiedler, Thomas M. and Ladd, Mark E. and Clemens, Markus and Bitz, Andreas},
  title     = {Safety of subjects during radiofrequency exposure in ultra-high-field magnetic resonance imaging},
  series = {IEEE Letters on Electromagnetic Compatibility Practice and Applications},
  volume    = {2},
  journal   = {IEEE Letters on Electromagnetic Compatibility Practice and Applications},
  number    = {3},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {2637-6423},
  doi       = {10.1109/LEMCPA.2020.3029747},
  pages     = {1 -- 8},
  year      = {2020},
  abstract  = {Magnetic resonance imaging (MRI) is one of the most important medical imaging techniques. Since the introduction of MRI in the mid-1980s, there has been a continuous trend toward higher static magnetic fields to obtain i.a. a higher signal-to-noise ratio. The step toward ultra-high-field (UHF) MRI at 7 Tesla and higher, however, creates several challenges regarding the homogeneity of the spin excitation RF transmit field and the RF exposure of the subject. In UHF MRI systems, the wavelength of the RF field is in the range of the diameter of the human body, which can result in inhomogeneous spin excitation and local SAR hotspots. To optimize the homogeneity in a region of interest, UHF MRI systems use parallel transmit systems with multiple transmit antennas and time-dependent modulation of the RF signal in the individual transmit channels. Furthermore, SAR increases with increasing field strength, while the SAR limits remain unchanged. Two different approaches to generate the RF transmit field in UHF systems using antenna arrays close and remote to the body are investigated in this letter. Achievable imaging performance is evaluated compared to typical clinical RF transmit systems at lower field strength. The evaluation has been performed under consideration of RF exposure based on local SAR and tissue temperature. Furthermore, results for thermal dose as an alternative RF exposure metric are presented.},
  language  = {en}
}
@article{BlomeMashhoon1984,
  author    = {Blome, Hans-Joachim and Mashhoon, Bahram},
  title     = {Quasi-normal oscillations of a Schwarzschild black hole},
  series = {Physics Letters A. 100 (1984), H. 5},
  journal   = {Physics Letters A. 100 (1984), H. 5},
  isbn      = {0375-9601},
  pages     = {231 -- 234},
  year      = {1984},
  language  = {en}
}
@article{WollertFiedlerStockmann1994,
  author    = {Wollert, J{\"o}rg and Fiedler, J{\"o}rg and Stockmann, T.},
  title     = {Automatisieren mit dem PC : was der Personal Computer kann und wo er passen muss},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 6},
  issn      = {0013-5658},
  pages     = {76 -- 82},
  year      = {1994},
  language  = {de}
}
@article{VoegeleJosyabhatlaBalletal.2023,
  author    = {V{\"o}gele, Stefan and Josyabhatla, Vishnu Teja and Ball, Christopher Stephen and Rhoden, Imke and Grajewski, Matthias and R{\"u}bbelke, Dirk and Kuckshinrichs, Wilhelm},
  title     = {Robust assessment of energy scenarios from stakeholders' perspectives},
  series = {Energy},
  journal   = {Energy},
  number    = {In Press, Article 128326},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-6785 (Online)},
  doi       = {10.1016/j.energy.2023.128326},
  year      = {2023},
  abstract  = {Using scenarios is vital in identifying and specifying measures for successfully transforming the energy system. Such transformations can be particularly challenging and require the support of a broader set of stakeholders. Otherwise, there will be opposition in the form of reluctance to adopt the necessary technologies. Usually, processes for considering stakeholders' perspectives are very time-consuming and costly. In particular, there are uncertainties about how to deal with modifications in the scenarios. In principle, new consulting processes will be required. In our study, we show how multi-criteria decision analysis can be used to analyze stakeholders' attitudes toward transition paths. Since stakeholders differ regarding their preferences and time horizons, we employ a multi-criteria decision analysis approach to identify which stakeholders will support or oppose a transition path. We provide a flexible template for analyzing stakeholder preferences toward transition paths. This flexibility comes from the fact that our multi-criteria decision aid-based approach does not involve intensive empirical work with stakeholders. Instead, it involves subjecting assumptions to robustness analysis, which can help identify options to influence stakeholders' attitudes toward transitions.},
  language  = {en}
}
@article{GoettscheHoffschmidtSchmitzetal.2010,
  author    = {G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Sauerborn, Markus},
  title     = {Solar Concentrating Systems Using Small Mirror Arrays},
  series = {Journal of solar energy engineering},
  volume    = {132},
  journal   = {Journal of solar energy engineering},
  number    = {1},
  publisher = {ASME},
  address   = {New York},
  issn      = {0199-6231},
  doi       = {10.1115/1.4000332},
  pages     = {4 Seiten},
  year      = {2010},
  abstract  = {The cost of solar tower power plants is dominated by the heliostat field making up roughly 50\% of investment costs. Classical heliostat design is dominated by mirrors brought into position by steel structures and drives that guarantee high accuracies under wind loads and thermal stress situations. A large fraction of costs is caused by the stiffness requirements of the steel structure, typically resulting in ~ 20 kg/m² steel per mirror area. The typical cost figure of heliostats (figure mentioned by Solucar at Solar Paces Conference, Seville, 2006) is currently in the area of 150 €/m² caused by the increasing price of the necessary raw materials. An interesting option to reduce costs lies in a heliostat design where all moving parts are protected from wind loads. In this way, drives and mechanical layout may be kept less robust, thereby reducing material input and costs. In order to keep the heliostat at an appropriate size, small mirrors (around 10x10 cm²) have to be used, which are placed in a box with a transparent cover. Innovative drive systems are developed in order to obtain a cost-effective design. A 0,5x0,5 m² demonstration unit will be constructed. Tests of the unit are carried out with a high-precision artificial sun unit that imitates the sun's path with an accuracy of less than 0.5 mrad and creates a beam of parallel light with a divergence of less than 4 mrad.},
  language  = {en}
}
@article{BallVoegeleGrajewskietal.2021,
  author    = {Ball, Christopher Stephen and V{\"o}gele, Stefan and Grajewski, Matthias and Kuckshinrichs, Wilhelm},
  title     = {E-mobility from a multi-actor point of view: Uncertainties and their impacts},
  series = {Technological Forecasting and Social Change},
  volume    = {170},
  journal   = {Technological Forecasting and Social Change},
  number    = {Art. 120925},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0040-1625},
  doi       = {10.1016/j.techfore.2021.120925},
  year      = {2021},
  language  = {en}
}
@article{WeberArentMuenchetal.2016,
  author    = {Weber, Tobias and Arent, Jan-Christoph and M{\"u}nch, Lukas and Duhovic, Miro and Balvers, Johannes Mattheus},
  title     = {A fast method for the generation of boundary conditions for thermal autoclave simulation},
  series = {Composites Part A},
  volume    = {88},
  journal   = {Composites Part A},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-835X},
  doi       = {10.1016/j.compositesa.2016.05.036},
  pages     = {216 -- 225},
  year      = {2016},
  abstract  = {Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.},
  language  = {en}
}
@article{SponagelBaroudFalketal.2004,
  author    = {Sponagel, Stefan and Baroud, Gamal and Falk, R. and Crookshank, M.},
  title     = {Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration. G. Baroud, R. Falk, M. Crookshank, S. Sponagel, T. Steffen},
  series = {Journal of Biomechanics. 37 (2004), H. 2},
  journal   = {Journal of Biomechanics. 37 (2004), H. 2},
  isbn      = {0021-9290},
  pages     = {189 -- 196},
  year      = {2004},
  language  = {en}
}
@article{BodeBartschBoulikasetal.1998,
  author    = {Bode, J{\"u}rgen and Bartsch, J{\"o}rg W. and Boulikas, Toulikas and Iber, Michaela and Mielke, Christian and Sch{\"u}beler, Dirk and Seibler, Jost and Benham, Craig},
  title     = {Transcription-promoting genomic sites in mammalia: their elucidation and architectural principles},
  series = {Gene therapy \& molecular biology},
  volume    = {1},
  journal   = {Gene therapy \& molecular biology},
  number    = {1},
  issn      = {1529-9120},
  pages     = {1 -- 29},
  year      = {1998},
  language  = {en}
}
@article{SpelthahnSchaffrathCoppeetal.2010,
  author    = {Spelthahn, Heiko and Schaffrath, Sophie and Coppe, Thomas and Rufi, Frederic and Sch{\"o}ning, Michael Josef},
  title     = {Development of an electrolyte-insulator-semiconductor (EIS) based capacitive heavy metal sensor for the detection of Pb2+ und Cd2+ ions},
  series = {Physica status solidi (a) : applications and material science},
  volume    = {207},
  journal   = {Physica status solidi (a) : applications and material science},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983306},
  pages     = {930 -- 934},
  year      = {2010},
  abstract  = {Chalcogenide glass materials as membranes for potentiometric sensors for chemical analysis in solutions have been studied since more than 20 years. In this work, an electrolyte-insulator-semiconductor structure was combined with chalcogenide glass membranes prepared by means of the pulsed laser deposition technique. Depending on the membrane composition a selectivity to different ions (Cd2+ and Pb2+) is achieved. The different sensor membranes have been physically characterised using microscopy, ellipsometry, profilometry, atomic force microscopy (AFM), scanning electron microscopy (SEM) and Rutherford backscattering spectrometry (RBS). The electrochemical behaviour has been investigated via capacitance/voltage (C/V) and constant capacitance (ConCap) measurements and results in a Cd2+ sensitivity of 23.1 ± 0.6 mV per decade in a linear range from 7 × 10-6 to 10-2 mol/l and 24.4 ± 0.5 mV per decade in a linear range from 5 × 10-6 to 10-2 mol/l for Pb2+, respectively.},
  language  = {en}
}
@article{DigelWehlitzKayseretal.2018,
  author    = {Digel, Ilya and Wehlitz, V. and Kayser, Peter and Figiel-Lange, A. and Bassam, Rasha and Rundstedt, F. von},
  title     = {Suspension depletion approach for exemption of infected Solanum jasminoides cells from pospiviroids},
  series = {Plant Pathology},
  volume    = {67},
  journal   = {Plant Pathology},
  number    = {2},
  publisher = {Wiley},
  address   = {Oxford},
  issn      = {1365-3059},
  doi       = {10.1111/ppa.12750},
  pages     = {358 -- 365},
  year      = {2018},
  abstract  = {Despite numerous studies, viroid elimination from infected plants remains a very challenging task. This study introduces for the first time a novel 'suspension depletion' approach for exemption of Solanum jasminoides plants from viroids. The proposed method implies initial establishment of suspension cultures of the infected plant cells. The suspended cells were then physically treated (mild thermotherapy, 33 °C), which presumably delayed the replication of the viroid. The viroid concentration in the treated biomass was monitored weekly using pospiviroid-specific PCR. After 10-12 weeks of continuous treatment, a sufficient decrease in viroid concentration was observed such that the infection became undetectable by PCR. The treated single cells then gave rise to microcolonies on a solid culture medium and the obtained viroid-negative clones were further promoted to regenerate into viroid-free plants. Three years of accumulated experimental data suggests feasibility, broad applicability, and good efficacy of the proposed approach.},
  language  = {en}
}
@article{StaatBaroudTopcuetal.2008,
  author    = {Staat, Manfred and Baroud, Gamal and Topcu, M. and Sponagel, Stefan},
  title     = {Soft Materials in Technology and Biology - Characteristics, Properties, and Parameter Identification},
  series = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  journal   = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-75408-4},
  pages     = {253 -- 315},
  year      = {2008},
  language  = {en}
}
@article{TemizArtmannBaşkurtPekcetinetal.2000,
  author    = {Temiz Artmann, Ayseg{\"u}l and Ba{\c{s}}kurt, Oǧuz Kerim and Pekcetin, C. and Kandemir, F.},
  title     = {Leukocyte activation, oxidant stress and red blood cell properties after acute, exhausting exercise in rats. Temiz, A.; Baskurt, O. K., Pekcetin, C.; Kandemir, F.; G{\"u}re, A.},
  series = {Clinical Hemorheology and Microcirculation. 22 (2000), H. 4},
  journal   = {Clinical Hemorheology and Microcirculation. 22 (2000), H. 4},
  isbn      = {1386-0291},
  pages     = {253 -- 259},
  year      = {2000},
  language  = {en}
}
@article{TemizArtmannYalcinResmietal.2002,
  author    = {Temiz Artmann, Ayseg{\"u}l and Yalcin, Ozlem and Resmi, Halil and Ba{\c{s}}kurt, Oǧuz Kerim},
  title     = {Can white blood cell activation be one of the major factors that affect hemorheological parameters during and after exercise?},
  series = {Clinical Hemorheology and Microcirculation. 26 (2002), H. 3},
  journal   = {Clinical Hemorheology and Microcirculation. 26 (2002), H. 3},
  isbn      = {1386-0291},
  pages     = {189 -- 193},
  year      = {2002},
  language  = {en}
}
@article{SponagelBaroudFalketal.2004,
  author    = {Sponagel, Stefan and Baroud, Gamal and Falk, R. and Crookshank, M.},
  title     = {Corrigendum to "Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration". Baroud, G.; Falk, R.; Crookshank, M.; Sponagel, S.; Steffen, T.},
  series = {Journal of Biomechanics. 37 (2004), H. 2},
  journal   = {Journal of Biomechanics. 37 (2004), H. 2},
  isbn      = {0021-9290},
  pages     = {1802},
  year      = {2004},
  language  = {en}
}
@article{ClaessenGrefenMangetal.2010,
  author    = {Claessen, O. and Grefen, Dana and Mang, Thomas and Dikland, H. G. and Dikland, H. G. and Duin, M. van},
  title     = {Helle Fensterprofilmaterialien : Alterungsverhalten auf Basis von peroxidisch vernetztem EPDM},
  series = {Kautschuk, Gummi, Kunststoffe : KGK},
  volume    = {63},
  journal   = {Kautschuk, Gummi, Kunststoffe : KGK},
  number    = {9},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  isbn      = {0948-3276},
  pages     = {350 -- 360},
  year      = {2010},
  language  = {de}
}
@article{WeberArentSteffenetal.2017,
  author    = {Weber, Tobias and Arent, Jan-Christoph and Steffen, Lucas and Balvers, Johannes Mattheus and Duhovic, Miro},
  title     = {Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation},
  series = {Journal of Composite Materials},
  volume    = {51},
  journal   = {Journal of Composite Materials},
  number    = {12},
  publisher = {Sage},
  address   = {London},
  issn      = {1530-793X},
  doi       = {10.1177/0021998317699868},
  pages     = {1753 -- 1767},
  year      = {2017},
  language  = {en}
}
@article{KernKloetersPferdemenges2010,
  author    = {Kern, Alexander and Kl{\"o}ters, Georg and Pferdemenges, J{\"o}rg},
  title     = {Optimised protection against lightning for the signalling and safety systems of level crossings on non-electrified railway lines},
  series = {RTR : European Rail Technology Review},
  volume    = {50},
  journal   = {RTR : European Rail Technology Review},
  number    = {2},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0079-9548},
  year      = {2010},
  language  = {en}
}
@article{TemizArtmannBaşkurtEdremitlioglu1994,
  author    = {Temiz Artmann, Ayseg{\"u}l and Ba{\c{s}}kurt, Oǧuz Kerim and Edremitlioglu, M.},
  title     = {In vitro effects of in vivo activated leukocytes on red blood cell filterability and lipid peroxidation. Baskurt, O.K.; Edremitlioglu, M.; Temiz, A.},
  series = {Clinical Hemorheology. 14 (1994), H. 4},
  journal   = {Clinical Hemorheology. 14 (1994), H. 4},
  pages     = {591 -- 596},
  year      = {1994},
  language  = {en}
}
@article{SponagelBaroudSteffenetal.2002,
  author    = {Sponagel, Stefan and Baroud, Gamal and Steffen, T. and Wu, J.},
  title     = {Parameter identification for cement infiltration of osteoporotic bone},
  series = {Poromechanics II : Proceedings of the Second Biot Conference on Poromechanics Grenoble, France 26 - 28 August 2002 / ed. by J.-L. Auriault ...},
  journal   = {Poromechanics II : Proceedings of the Second Biot Conference on Poromechanics Grenoble, France 26 - 28 August 2002 / ed. by J.-L. Auriault ...},
  publisher = {Balkema},
  address   = {Lisse [u.a.]},
  isbn      = {90-5809-394-8},
  pages     = {55 -- 58},
  year      = {2002},
  language  = {en}
}
@article{Naujokat2010,
  author    = {Naujokat, Anke},
  title     = {Ut rhetorica architectura - Leon Battista Alberti´s Technique of Architectural Collage / Leon Battista Albertis architektonische Collagetechnik},
  series = {Candide : journal for architectural knowledge},
  volume    = {2},
  journal   = {Candide : journal for architectural knowledge},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  issn      = {1869-6465},
  pages     = {73 -- 100},
  year      = {2010},
  abstract  = {Leon Battista Alberti, probably the most innovative architect of early Renaissance Italy, has always fascinated scholars by virtue of the striking interpenetration of theory and practice manifest in his work. As an architect, Alberti was an autodidact. Without the benefit of the formative influence of a master or design education, the roots of his conception of architecture lie in his intellectual formation through humanistic rhetoric. The present study demonstrates with reference to a specific project — the Tempietto of the Holy Sepulchre in Florence — how Alberti's humanist approach conditioned his method of architectural design.},
  language  = {en}
}
@article{TemizArtmannBaşkurtMeiselman1998,
  author    = {Temiz Artmann, Ayseg{\"u}l and Ba{\c{s}}kurt, Oǧuz Kerim and Meiselman, H. J.},
  title     = {Effect of superoxide anions on red blood cell rheologic properties. Baskurt, O. K.; Temiz, A.; Meiselman, H. J.},
  series = {Free Radical Biology and Medicine. 24 (1998), H. 1},
  journal   = {Free Radical Biology and Medicine. 24 (1998), H. 1},
  isbn      = {0891-5849},
  pages     = {102 -- 110},
  year      = {1998},
  language  = {en}
}
@article{TemizArtmannBaşkurtMeiselman1997,
  author    = {Temiz Artmann, Ayseg{\"u}l and Ba{\c{s}}kurt, Oǧuz Kerim and Meiselman, H. J.},
  title     = {Red blood cell aggregation in experimental sepsis . Baskurt, O. K.; Temiz, A.; Meiselman, H. J.},
  series = {Journal of Laboratory and Clinical Medicine. 130 (1997), H. 2},
  journal   = {Journal of Laboratory and Clinical Medicine. 130 (1997), H. 2},
  isbn      = {0022-2143},
  pages     = {183 -- 190},
  year      = {1997},
  language  = {en}
}
@article{KernSchelthoffMathieu2010,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Die dynamische Blitzkugel : Wahrscheinlichkeitsberechnung f{\"u}r Blitzeinschl{\"a}ge in Geb{\"a}ude},
  series = {de - Fachzeitschrift f{\"u}r das Elektrohandwerk},
  journal   = {de - Fachzeitschrift f{\"u}r das Elektrohandwerk},
  number    = {13-14},
  publisher = {H{\"u}thig},
  address   = {Heidelberg},
  issn      = {2509-517X},
  pages     = {24 -- 29},
  year      = {2010},
  language  = {de}
}
@article{TemizArtmannBaşkurtEdremitlioglu1995,
  author    = {Temiz Artmann, Ayseg{\"u}l and Ba{\c{s}}kurt, Oǧuz Kerim and Edremitlioglu, M.},
  title     = {Effect of erythrocyte deformability on myocardial hematocrit gradient. Baskurt, O.K.; Edremitlioglu, M.; Temiz, A.},
  series = {American Journal of Physiology: Heart and Circulatory Physiology. 268 (1995), H. 1},
  journal   = {American Journal of Physiology: Heart and Circulatory Physiology. 268 (1995), H. 1},
  isbn      = {0363-6135},
  pages     = {260 -- 264},
  year      = {1995},
  language  = {en}
}
@article{Esch2010,
  author    = {Esch, Thomas},
  title     = {Trends in der Nutzfahrzeugantriebstechnik},
  series = {Motortechnische Zeitschrift (MTZ)},
  volume    = {71},
  journal   = {Motortechnische Zeitschrift (MTZ)},
  number    = {10},
  publisher = {Springer Nature},
  address   = {Basel},
  issn      = {0024-8525},
  doi       = {10.1007/bf03225608},
  pages     = {652 -- 658},
  year      = {2010},
  abstract  = {Umweltzonen und Fahrverbote, kletternde Dieselpreise und steigende Straßenbenutzungsgeb{\"u}hren setzen dem Transportgewerbe aktuell schwer zu. Nutzfahrzeughersteller und Partner finden auf diese Herausforderungen neue Antworten mit der Erf{\"u}llung der EEV-Grenzwerte (Enhanced Environmentally Friendly Vehicle) als den gegenw{\"a}rtig anspruchsvollsten europ{\"a}ischen Abgasstandard f{\"u}r Lkw und Busse.},
  language  = {de}
}
@article{BienerSasseWemhoff2010,
  author    = {Biener, Ernst and Sasse, Torsten and Wemhoff, Thomas},
  title     = {Deponie auf Deponie - Technische und genehmigungsrechtliche Aspekte},
  series = {Band 19: Abschluss und Rekultivierung von Deponien und Altlasten 2010 : Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste {\"A}nderungsverordnung zur neuen DepV ; Beitr{\"a}ge zum Seminar am 13. und 14. Oktober 2010 in Karlsruhe},
  journal   = {Band 19: Abschluss und Rekultivierung von Deponien und Altlasten 2010 : Die Umsetzung der neuen Deponieverordnung - praktische Erfahrungen im Vollzug und erste {\"A}nderungsverordnung zur neuen DepV ; Beitr{\"a}ge zum Seminar am 13. und 14. Oktober 2010 in Karlsruhe},
  editor    = {Egloffstein, Thomas},
  publisher = {ICP-Eigenverlag},
  address   = {Karlsruhe},
  isbn      = {978-3-939662-08-2},
  pages     = {73 -- 84},
  year      = {2010},
  language  = {de}
}
@article{GronsfeldSparlaWeinnhold2010,
  author    = {Gronsfeld, Richard and Sparla, Peter and Weinnhold, Wolfgang},
  title     = {Airborne und terrestrisches Laserscanning - neue Tools f{\"u}r den Talsperrenbetreiber?},
  series = {Wasserwirtschaft},
  volume    = {100},
  journal   = {Wasserwirtschaft},
  number    = {4},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  doi       = {10.1007/BF03241621},
  pages     = {80 -- 82},
  year      = {2010},
  language  = {de}
}
@article{ThelenPaschmannHamelmann2010,
  author    = {Thelen, Jan and Paschmann, Hans and Hamelmann, Dirk},
  title     = {Zielsichere Herstellung und Anwendung von Fl{\"u}ssigboden},
  series = {bi-UmweltBau},
  journal   = {bi-UmweltBau},
  publisher = {bi-Medien-GmbH},
  address   = {Kiel},
  issn      = {2509-2685},
  pages     = {48 -- 49},
  year      = {2010},
  language  = {de}
}
@article{ZiemonsHeinrichsStreunetal.2004,
  author    = {Ziemons, Karl and Heinrichs, U. and Streun, M. and Pietrzyk, Uwe},
  title     = {Validation of GEANT3 simulation studies with a dual-head PMT ClearPET™ prototype},
  series = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 5},
  journal   = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 5},
  issn      = {1082-3654},
  pages     = {3053 -- 3056},
  year      = {2004},
  abstract  = {The ClearPET™ project is proposed by working groups of the Crystal Clear Collaboration (CCC) to develop a 2nd generation high performance small animal positron emission tomograph (PET). High sensitivity and high spatial resolution is foreseen for the ClearPET™ camera by using a phoswich arrangement combining mixed lutetium yttrium aluminum perovskite (LuYAP:Ce) and lutetium oxyorthosilicate (LSO) scintillating crystals. Design optimizations for the first photomultiplier tube (PMT) based ClearPET camera are done with a Monte-Carlo simulation package implemented on GEANT3 (CERN, Geneva, Switzerland). A dual-head prototype has been built to test the frontend electronics and was used to validate the implementation of the GEANT3 simulation tool. Multiple simulations were performed following the experimental protocols to measure the intrinsic resolution and the sensitivity profile in axial and radial direction. Including a mean energy resolution of about 27.0\% the simulated intrinsic resolution is about (1.41±0.11)mm compared to the measured of (1.48±0.06)mm. The simulated sensitivity profiles show a mean square deviation of 12.6\% in axial direction and 3.6\% in radial direction. Satisfactorily these results are representative for all designs and confirm the scanner geometry.},
  language  = {en}
}
@article{KhodaverdiChatziioannouWeberetal.2005,
  author    = {Khodaverdi, M. and Chatziioannou, A. F. and Weber, S. and Ziemons, Karl and Halling, H. and Pietrzyk, Uwe},
  title     = {Investigation of different MicroCT scanner configurations by GEANT4 simulations},
  series = {IEEE Transactions on Nuclear Science},
  volume    = {52},
  journal   = {IEEE Transactions on Nuclear Science},
  number    = {1},
  isbn      = {0018-9499},
  pages     = {188 -- 192},
  year      = {2005},
  abstract  = {This study has been performed to design the combination of the new ClearPET (ClearPET is a trademark of the Crystal Clear Collaboration), a small animal positron emission tomography (PET) system, with a micro-computed tomography (microCT) scanner. The properties of different microCT systems have been determined by simulations based on GEANT4. We will demonstrate the influence of the detector material and the X-ray spectrum on the obtained contrast. Four different detector materials (selenium, cadmium zinc telluride, cesium iodide and gadolinium oxysulfide) and two X-ray spectra (a molybdenum and a tungsten source) have been considered. The spectra have also been modified by aluminum filters of varying thickness. The contrast between different tissue types (water, air, brain, bone and fat) has been simulated by using a suitable phantom. The results indicate the possibility to improve the image contrast in microCT by an optimized combination of the X-ray source and detector material.},
  language  = {en}
}
@article{BlomeChiconeHehletal.2010,
  author    = {Blome, Hans-Joachim and Chicone, Carmen and Hehl, Friedrich W. and Mashhoon, Bahram},
  title     = {Nonlocal modification of Newtonian gravity},
  series = {Physical Review D},
  volume    = {81},
  journal   = {Physical Review D},
  number    = {6},
  publisher = {American Physical Society},
  address   = {Melville, NY},
  issn      = {0556-2821},
  doi       = {10.1103/PhysRevD.81.065020},
  year      = {2010},
  abstract  = {The Newtonian regime of a recent nonlocal extension of general relativity is investigated. Nonlocality is introduced via a scalar "constitutive" kernel in a special case of the translational gauge theory of gravitation, namely, the teleparallel equivalent of general relativity. In this theory, the nonlocal aspect of gravity simulates dark matter. A nonlocal and nonlinear generalization of Poisson's equation of Newtonian gravitation is presented. The implications of nonlocality for the gravitational physics in the solar system are briefly studied.},
  language  = {en}
}
@article{Timme2010,
  author    = {Timme, Michael},
  title     = {K{\"u}ndigung des Mietverh{\"a}ltnisses wegen nicht gezahlter Kosten eines Rechtsstreits},
  series = {Monatsschrift f{\"u}r deutsches Recht},
  volume    = {64},
  journal   = {Monatsschrift f{\"u}r deutsches Recht},
  number    = {19},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {10.9785/ovs-mdtr-2010-1089},
  pages     = {1089 -- 1091},
  year      = {2010},
  abstract  = {Der BGH hat entschieden, dass ein Vermieter einen Wohnraummietvertrag nicht deshalb k{\"u}ndigen kann, weil der Mieter die Prozesskosten eines fr{\"u}heren, auf Zahlungsverzug gest{\"u}tzten R{\"a}umungsprozesses nicht begleicht. Der folgende Beitrag beleuchtet die Konsequenzen dieser Entscheidung f{\"u}r die mietvertragliche Praxis},
  language  = {de}
}
@article{ZiemonsBruyndonckxPerezetal.2008,
  author    = {Ziemons, Karl and Bruyndonckx, P. and Perez, J. M. and Pietrzyk, Uwe and Rato, P. and Tavernier, S.},
  title     = {Beyond ClearPET: Next Aims},
  series = {5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008},
  journal   = {5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008},
  isbn      = {978-1-4244-2003-2},
  pages     = {1421 -- 1424},
  year      = {2008},
  abstract  = {The CRYSTAL CLEAR collaboration, in short CCC, is a consortium of 12 academic institutions, mainly from Europe, joining efforts in the area of developing instrumentation for nuclear medicine and medical imaging. In the framework of the CCC a high performance small animal PET system, called ClearPET, was developed by using new technologies in electronics and crystals in a phoswich arrangement combining two types of lutetium- based scintillator materials: LSO:Ce and LuYAP:Ce. Our next aim will be the development of hybrid image systems. Hybrid MR-PET imaging has many unique advantages for brain research. This has sparked a new research line within CCC for the development of novel MR-PET compatible technologies. MRI is not as sensitive as PET but PET has poorer spatial resolution than MRI. Two major advantages of PET are sensitivity and its ability to acquire metabolic information. To assess these innovations, the development of a 9.4T hybrid animal MR-PET scanner is proposed based on an existing 9.4T MR scanner that will be adapted to enable simultaneous acquisition of MR and PET data using cutting- edge technology for both MR and PET.},
  language  = {en}
}
@article{KhodaverdiChaziioannouWeberetal.2004,
  author    = {Khodaverdi, M. and Chaziioannou, A. F. and Weber, S. and Ziemons, Karl and Halling, H. and Pietrzyk, Uwe},
  title     = {Investigation of different microCT scanner configurations by GEANT4 simulations},
  series = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 4},
  journal   = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 4},
  issn      = {1082-3654},
  pages     = {2989 -- 2993},
  year      = {2004},
  abstract  = {This study has been performed to design the combination of the new ClearPET TM (ClearPET is a trademark of the Crystal Clear Collaboration), a small animal Positron Emission Tomography (PET) system, with a microComputed Tomography (microCT) scanner. The properties of different microCT systems have been determined by simulations based on GEANT4. We demonstrate the influence of the detector material and the X-ray spectrum on the obtained contrast. Four different detector materials (selenium, cadmium zinc telluride, cesium iodide and gadolinium oxysulfide) and two X-ray spectra (a molybdenum and a tungsten source) have been considered. The spectra have also been modified by aluminum filters of varying thickness. The contrast between different tissue types (water, air, brain, bone and fat) has been simulated by using a suitable phantom. The results indicate the possibility to improve the image contrast in microCT by an optimized combination of the X-ray source and detector material.},
  language  = {en}
}
@article{WagnerWernerMiyamotoetal.2010,
  author    = {Wagner, Torsten and Werner, Frederik and Miyamoto, Ko-ichiro and Ackermann, Hans-Josef and Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {FPGA-based LAPS device for the flexible design of sensing sites on functional interfaces},
  series = {Physica Status Solidi (A)},
  volume    = {207},
  journal   = {Physica Status Solidi (A)},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6300},
  doi       = {10.1002/pssa.200983320},
  pages     = {844 -- 849},
  year      = {2010},
  abstract  = {The development of new interfaces for (bio-)chemical sensors requires comprehensive analyses and testing. The light-addressable potentiometric sensor (LAPS) can be used as a platform to investigate the sensitivity of a newly developed interface towards (bio-)chemical agents. LAPS measurements are spatially resolved by utilisation of focused light beams to define individual measurement spots. In this work, a new digitally modulated LAPS set-up based on an FPGA design will be introduced to increase the number of measurement spots, to shorten the measurement time and to improve the measurement accuracy.},
  language  = {en}
}
@article{BerretzSkorupaSanderetal.2011,
  author    = {Berretz, Frank and Skorupa, Sascha and Sander, Volker and Belloum, Adam and Bubak, Marian},
  title     = {Actor-Driven Workflow Execution in Distributed Environments},
  series = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  journal   = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-21877-4},
  pages     = {287 -- 294},
  year      = {2011},
  language  = {en}
}
@article{GerhardsSkorupaSanderetal.2011,
  author    = {Gerhards, M. and Skorupa, Sascha and Sander, Volker and Pfeiffer, P. and Belloum, Adam},
  title     = {Towards a security framework for a WS-HumanTask processor},
  series = {7th International Conference on Network and Service Management (CNSM), 2011 Paris},
  journal   = {7th International Conference on Network and Service Management (CNSM), 2011 Paris},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-3-901882-44-9},
  pages     = {1 -- 5},
  year      = {2011},
  language  = {en}
}
@article{BernauKnoedlerEmontsetal.2022,
  author    = {Bernau, C. R. and Kn{\"o}dler, Matthias and Emonts, Jessica and J{\"a}pel, Ronald Colin and Buyel, Johannes Felix},
  title     = {The use of predictive models to develop chromatography-based purification processes},
  series = {Frontiers in Bioengineering and Biotechnology},
  journal   = {Frontiers in Bioengineering and Biotechnology},
  number    = {10},
  publisher = {Frontiers Media},
  address   = {Lausanne},
  issn      = {2296-4185 (online-ressource)},
  doi       = {10.3389/fbioe.2022.1009102},
  pages     = {25 Seiten},
  year      = {2022},
  abstract  = {Chromatography is the workhorse of biopharmaceutical downstream processing because it can selectively enrich a target product while removing impurities from complex feed streams. This is achieved by exploiting differences in molecular properties, such as size, charge and hydrophobicity (alone or in different combinations). Accordingly, many parameters must be tested during process development in order to maximize product purity and recovery, including resin and ligand types, conductivity, pH, gradient profiles, and the sequence of separation operations. The number of possible experimental conditions quickly becomes unmanageable. Although the range of suitable conditions can be narrowed based on experience, the time and cost of the work remain high even when using high-throughput laboratory automation. In contrast, chromatography modeling using inexpensive, parallelized computer hardware can provide expert knowledge, predicting conditions that achieve high purity and efficient recovery. The prediction of suitable conditions in silico reduces the number of empirical tests required and provides in-depth process understanding, which is recommended by regulatory authorities. In this article, we discuss the benefits and specific challenges of chromatography modeling. We describe the experimental characterization of chromatography devices and settings prior to modeling, such as the determination of column porosity. We also consider the challenges that must be overcome when models are set up and calibrated, including the cross-validation and verification of data-driven and hybrid (combined data-driven and mechanistic) models. This review will therefore support researchers intending to establish a chromatography modeling workflow in their laboratory.},
  language  = {en}
}
@article{FredebeulKreinKnoben2010,
  author    = {Fredebeul-Krein, Markus and Knoben, Werner},
  title     = {Long term risk sharing contracts as an approach to establish public-private partnerships for investment into next generation access networks},
  series = {Telecommunications Policy},
  volume    = {34},
  journal   = {Telecommunications Policy},
  number    = {9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0308-5961},
  doi       = {10.1016/j.telpol.2010.07.011},
  pages     = {528 -- 539},
  year      = {2010},
  abstract  = {This paper develops an investment/pricing model for the deployment of basic broadband networks which, along with other applications, is applicable to public-private partnership projects. In particular, a new investment model is suggested to be used for finance deployment over a longer term by enabling both private and public investors to participate in the roll-out of next generation access (NGA) infrastructure. This so-called "long-term risk sharing concept" has several notable benefits compared with the traditional regulatory approach. Above all, the model enables both private operators and public authorities to share the risk of investing in NGA infrastructure. Thus the model offers a way for public authorities to achieve a timely and countrywide roll-out of NGA networks, including in areas where NGA investment would otherwise not occur.},
  language  = {en}
}
@article{FredebeulKrein2010,
  author    = {Fredebeul-Krein, Markus},
  title     = {Wirtschaftskrise : Staatliche F{\"o}rderung von glasfaserbasierten Breitbandnetzen?},
  series = {Wirtschaftsdienst},
  volume    = {90},
  journal   = {Wirtschaftsdienst},
  number    = {2},
  publisher = {ZBW},
  address   = {Berlin},
  issn      = {0043-6275},
  pages     = {113 -- 117},
  year      = {2010},
  abstract  = {Glasfaserbasierte Breitbandnetze werden in Deutschland auch aufgrund der Wirtschaftskrise nur sehr z{\"o}gerlich ausgebaut. Markus Fredebeul-Krein h{\"a}lt eine staatliche Subventionierung der Breitbandnetze nur bedingt f{\"u}r gerechtfertigt. Private Investoren ben{\"o}tigen jedoch dringend Planungssicherheit durch verl{\"a}ssliche Regulierungsvorschriften.},
  language  = {de}
}
@article{SchlamannYoonMaderwaldetal.2009,
  author    = {Schlamann, M. and Yoon, M.-S. and Maderwald, S. and Pietrzyk, Thomas and Bitz, Andreas and Gerwig, M. and Forsting, M. and Ladd, S. C. and Ladd, M. E. and Kastrup, O.},
  title     = {Auswirkungen der Magnetresonanztomografie auf die Elektrophysiologie des motorischen Kortex: eine Studie mit transkranieller Magnetstimulation},
  series = {R{\"o}Fo - Fortschritte auf dem Giebiet der R{\"o}ntgenstrahlen und der bildgebenden Verfahren},
  volume    = {181},
  journal   = {R{\"o}Fo - Fortschritte auf dem Giebiet der R{\"o}ntgenstrahlen und der bildgebenden Verfahren},
  number    = {3},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {1438-9029},
  doi       = {10.1055/s-0028-1109038},
  pages     = {215 -- 219},
  year      = {2009},
  language  = {de}
}
@article{GerhardsSkorupaSanderetal.2011,
  author    = {Gerhards, M. and Skorupa, Sascha and Sander, Volker and Belloum, Adam and Vesunin, D. and Benabdelkader, A.},
  title     = {HisT/PLIER : A Two-Fold Provenance Approach for Grid-Enabled Scientific Workflows Using WS-VLAM},
  series = {12th IEEE/ACM International Conference on Grid Computing (GRID), 2011},
  journal   = {12th IEEE/ACM International Conference on Grid Computing (GRID), 2011},
  publisher = {IEEE},
  address   = {New York},
  doi       = {10.1109/Grid.2011.39},
  pages     = {224 -- 225},
  year      = {2011},
  language  = {en}
}
@article{FredebeulKrein2010,
  author    = {Fredebeul-Krein, Markus},
  title     = {Die Abschaffung der Studiengeb{\"u}hren ist der falsche Weg!},
  series = {Der Ordnungspolitische Kommentar},
  journal   = {Der Ordnungspolitische Kommentar},
  year      = {2010},
  language  = {de}
}
@article{EmontsBuyel2023,
  author    = {Emonts, Jessica and Buyel, Johannes Felix},
  title     = {An overview of descriptors to capture protein properties - Tools and perspectives in the context of QSAR modeling},
  series = {Computational and Structural Biotechnology Journal},
  journal   = {Computational and Structural Biotechnology Journal},
  number    = {21},
  publisher = {Research Network of Computational and Structural Biotechnology},
  address   = {Gotenburg},
  issn      = {2001-0370 (online-ressource)},
  doi       = {10.1016/j.csbj.2023.05.022},
  pages     = {3234 -- 3247},
  year      = {2023},
  abstract  = {Proteins are important ingredients in food and feed, they are the active components of many pharmaceutical products, and they are necessary, in the form of enzymes, for the success of many technical processes. However, production can be challenging, especially when using heterologous host cells such as bacteria to express and assemble recombinant mammalian proteins. The manufacturability of proteins can be hindered by low solubility, a tendency to aggregate, or inefficient purification. Tools such as in silico protein engineering and models that predict separation criteria can overcome these issues but usually require the complex shape and surface properties of proteins to be represented by a small number of quantitative numeric values known as descriptors, as similarly used to capture the features of small molecules. Here, we review the current status of protein descriptors, especially for application in quantitative structure activity relationship (QSAR) models. First, we describe the complexity of proteins and the properties that descriptors must accommodate. Then we introduce descriptors of shape and surface properties that quantify the global and local features of proteins. Finally, we highlight the current limitations of protein descriptors and propose strategies for the derivation of novel protein descriptors that are more informative.},
  language  = {en}
}
@article{HirschfeldLustfeldReisseletal.2010,
  author    = {Hirschfeld, Julian A. and Lustfeld, Hans and Reißel, Martin and Steffen, Bernhard},
  title     = {A novel scheme for precise diagnostics and effective stabilization of currents in a fuel cell stack},
  series = {International Journal of Energy Research},
  volume    = {34},
  journal   = {International Journal of Energy Research},
  number    = {3},
  publisher = {Wiley},
  address   = {London},
  issn      = {0363-907X},
  doi       = {10.1002/er.1662},
  pages     = {293 -- 301},
  year      = {2010},
  abstract  = {A novel scheme for detecting inhomogeneous internal currents in a fuel cell stack is presented. In this paper the scheme is investigated for the case that the flow field plates consist of graphite. Then plates of high conductivity, e.g. aluminium between the flow field plates together with small slits in these plates have three effects: (a) Whenever a local inhomogeneity of the electric current occurs at a particular cell in the stack, this will induce a surface current close to that cell perpendicular to the averaged current. This current can be detected. (b) The plates of high conductivity completely prevent the inhomogeneities from spreading to neighbouring cells. (c) Even at the particular cell the inhomogeneity is suppressed as far as possible. Thus this scheme leads to much better diagnostic possibilities and at the same time reduces electric instabilities to an extent, where they probably become harmless. This scheme will first be explained for a simple model to clarify the idea. However, very precise three dimensional computations using realistic parameters are presented, corroborating the results of the simple model.},
  language  = {en}
}
@article{ScholzLeyDachwaldetal.2010,
  author    = {Scholz, A. and Ley, Wilfried and Dachwald, Bernd and Miau, J. J. and Juang, J. C.},
  title     = {Flight results of the COMPASS-1 picosatellite mission},
  series = {Acta Astronautica},
  volume    = {76},
  journal   = {Acta Astronautica},
  number    = {9-10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0094-5765},
  doi       = {10.1016/j.actaastro.2010.06.040},
  pages     = {1289 -- 1298},
  year      = {2010},
  abstract  = {The mission of the COMPASS-1 picosatellite is to take pictures of the earth, to validate a space-borne GPS receiver developed by the German Aerospace Center, and to verify the proper operation of the magnetic attitude control system in orbit. The spacecraft was launched on April 28, 2008 from the Indian space port Sriharikota, as part of the PSLV-C9 world record launch that simultaneously brought ten satellites into orbit. The mission operations were carried out from the ground stations in Aachen and Tainan. Arising difficulties in the communication link were overcome with the support of individuals from the amateur radio community. After several months of mission operation, abundant housekeeping and mission data has been commanded, received and analyzed and is presented in this paper.},
  language  = {en}
}
@article{HirschfeldLustfeldReisseletal.2010,
  author    = {Hirschfeld, Julian A. and Lustfeld, Hans and Reißel, Martin and Steffen, Bernhard},
  title     = {Tomographic diagnostics of current distributions in a fuel cell stack},
  series = {International Journal of Energy Research},
  volume    = {34},
  journal   = {International Journal of Energy Research},
  number    = {3},
  publisher = {Wiley},
  address   = {London},
  issn      = {0363-907X},
  doi       = {10.1002/er.1634},
  pages     = {284 -- 292},
  year      = {2010},
  abstract  = {A novel tomographic scheme for analysing the state of any single membrane electrode assembly (MEA) in a stack is suggested. Plates of very high conductivity placed between every fuel cell and slitted in an appropriate manner cause surface currents at well-defined locations of the stack. We show that knowing these surface currents, information about anomalies of the currents in a MEA can be obtained using the methods of tomography. The results are mathematically not unique. However, when assuming plausible defect structures, one can exclude improbable deficiencies by applying a special form of simulated annealing. We present numerical calculations of typical examples demonstrating that the essential defects of the MEA in any single cell of the stack can be detected and their extent can be determined.},
  language  = {en}
}
@article{HeinrichsPietrzykZiemons2003,
  author    = {Heinrichs, U. and Pietrzyk, Uwe and Ziemons, Karl},
  title     = {Design optimization of the PMT-ClearPET prototypes based on simulation studies with GEANT3},
  series = {IEEE Transactions on Nuclear Science},
  volume    = {50},
  journal   = {IEEE Transactions on Nuclear Science},
  number    = {5},
  isbn      = {0018-9499},
  pages     = {1428 -- 1432},
  year      = {2003},
  abstract  = {Within the Crystal Clear Collaboration (CCC), four centers are developing second generation high performance small animal positron emission tomography (PET) scanners for different kinds of animals and medical applications. The first prototypes are photomultiplier tube (PMT)-based systems including depth of interaction (DOI) detection by using a phoswich layer of lutetium oxyorthosilicate (LSO) and lutetium yttrium aluminum perovskite (LuYAP). The aim of these simulation studies is to optimize sensitivity and spatial resolution of given designs, which vary in fields of view (FOVs) caused by different detector configurations (ring/octagon) and sizes. For this purpose the simulation tool GEANT3 (CERN, Geneva, Switzerland) was used.},
  language  = {en}
}
@article{FredebeulKrein2010,
  author    = {Fredebeul-Krein, Markus},
  title     = {Studiengeb{\"u}hren sind sozial gerecht},
  series = {INSM-{\"O}konomenblog},
  journal   = {INSM-{\"O}konomenblog},
  publisher = {INSM},
  address   = {Berlin},
  year      = {2010},
  language  = {de}
}
@article{MuellerHirschfeldLambertzetal.2014,
  author    = {M{\"u}ller, Martin and Hirschfeld, Julian A. and Lambertz, Rita and Schulze Lohoff, Andreas and Lustfeld, Hans and Pfeifer, Heinz and Reißel, Martin},
  title     = {Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks},
  series = {Journal of power sources},
  volume    = {272},
  journal   = {Journal of power sources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2755 (E-Journal); 0378-7753 (Print)},
  doi       = {10.1016/j.jpowsour.2014.08.045},
  pages     = {225 -- 232},
  year      = {2014},
  abstract  = {In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.},
  language  = {en}
}
@article{MangHodeniusSchmitzRodeetal.2009,
  author    = {Mang, Thomas and Hodenius, Michael A. J. and Schmitz-Rode, Thomas and Baumann, Martin and Ivanova, Gergana and Wong, John Erik and Haulena, Friedhelm and Soenen, Stefaan J. H. and de Cuyper, Marcel},
  title     = {Absorption of 10-hydroxycamptothecin into the coat of magnetoliposomes / Hodenius, M. A. J. ; Schmitz-Rode, T. ; Baumann, M. ; Ivoanova, G. ; Wong, J. E. ; Mang, T. ; Haulena, F. ; Soenen, S. J. H. ; De Cuyper, M.},
  series = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3},
  journal   = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0927-7757},
  pages     = {20 -- 23},
  year      = {2009},
  language  = {en}
}
@article{ReisselLustfeldHirschfeldetal.2009,
  author    = {Reißel, Martin and Lustfeld, Hans and Hirschfeld, Julian A. and Steffen, Bernhard},
  title     = {Uniqueness of magnetotomography for fuel cells and fuel cell stacks / Lustfeld, H. ; Hirschfeld, J. ; Reißel, M ; Steffen, B.},
  series = {Journal of Physics A: Mathematical and Theoretical. 42 (2009), H. 495205},
  journal   = {Journal of Physics A: Mathematical and Theoretical. 42 (2009), H. 495205},
  isbn      = {0022-3689},
  pages     = {9 S.},
  year      = {2009},
  language  = {en}
}
@article{ReisselLustfeldSteffenetal.2009,
  author    = {Reißel, Martin and Lustfeld, Hans and Steffen, Bernhard and Schmidt, U.},
  title     = {Reconstruction of Electric Currents in a Fuel Cell by Magnetic Field Measurements / Lustfeld, H. ; Reißel, M. ; Steffen, B. ; Schmidt, U.},
  series = {Journal of fuel cell science and technology},
  volume    = {Vol. 6},
  journal   = {Journal of fuel cell science and technology},
  number    = {Iss. 2},
  isbn      = {1550-624X},
  pages     = {021012-1 -- 021012-8},
  year      = {2009},
  language  = {en}
}
@article{ReisselHirschfeldLustfeldetal.2009,
  author    = {Reißel, Martin and Hirschfeld, Julian A. and Lustfeld, Hans and Steffen, Bernhard},
  title     = {Magnetotomography and Electric Currents in a Fuel Cell / Lustfeld, H. ; Reißel, M. ; Steffen, B.},
  series = {Fuel Cells. 9 (2009), H. 4},
  journal   = {Fuel Cells. 9 (2009), H. 4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {1615-6854},
  pages     = {474 -- 481},
  year      = {2009},
  language  = {en}
}
@article{LustfeldHirschfeldReisseletal.2011,
  author    = {Lustfeld, Hans and Hirschfeld, Julian A. and Reißel, Martin and Steffen, Bernhard},
  title     = {Enhancement of precision and reduction of measuring points in tomographic reconstructions},
  series = {Physics Letters A},
  volume    = {375},
  journal   = {Physics Letters A},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0375-9601},
  pages     = {1167 -- 1171},
  year      = {2011},
  language  = {en}
}
@article{OrtnerHauserSchmadereretal.2019,
  author    = {Ortner, Marion and Hauser, Christine and Schmaderer, Christoph and Muggenthaler, Claudia and Hapfelmeier, Alexander and Sorg, Christian and Diehl-Schmid, Janine and Kurz, Alexander and F{\"o}rstl, Hans and Ikenberg, Benno and Kotliar, Konstantin and Holger, Poppert and Grimmer, Timo},
  title     = {Decreased vascular pulsatility in Alzheimer's disease dementia measured by transcranial color-coded duplex sonography},
  series = {Neuropsychiatric disease and treatment},
  journal   = {Neuropsychiatric disease and treatment},
  number    = {15},
  publisher = {Dove Medical Press},
  address   = {Albany, Auckland},
  issn      = {1178-2021},
  doi       = {10.2147/NDT.S225754},
  pages     = {3487 -- 3499},
  year      = {2019},
  abstract  = {Purpose: Impaired paravascular drainage of β-Amyloid (Aβ) has been proposed as a contributing cause for sporadic Alzheimer's disease (AD), as decreased cerebral blood vessel pulsatility and subsequently reduced propulsion in this pathway could lead to the accumulation and deposition of Aβ in the brain. Therefore, we hypothesized that there is an increased impairment in pulsatility across AD spectrum. Patients and Methods: Using transcranial color-coded duplex sonography (TCCS) the resistance and pulsatility index (RI; PI) of the middle cerebral artery (MCA) in healthy controls (HC, n=14) and patients with AD dementia (ADD, n=12) were measured. In a second step, we extended the sample by adding patients with mild cognitive impairment (MCI) stratified by the presence (MCI-AD, n=8) or absence of biomarkers (MCI-nonAD, n=8) indicative for underlying AD pathology, and compared RI and PI across the groups. To control for atherosclerosis as a confounder, we measured the arteriolar-venular-ratio of retinal vessels. Results: Left and right RI (p=0.020; p=0.027) and left PI (p=0.034) differed between HC and ADD controlled for atherosclerosis with AUCs of 0.776, 0.763, and 0.718, respectively. The RI and PI of MCI-AD tended towards ADD, of MCI-nonAD towards HC, respectively. RIs and PIs were associated with disease severity (p=0.010, p=0.023). Conclusion: Our results strengthen the hypothesis that impaired pulsatility could cause impaired amyloid clearance from the brain and thereby might contribute to the development of AD. However, further studies considering other factors possibly influencing amyloid clearance as well as larger sample sizes are needed.},
  language  = {en}
}
@article{KnoedlerRuehlEmontsetal.2019,
  author    = {Kn{\"o}dler, Matthias and R{\"u}hl, Clemens and Emonts, Jessica and Buyel, Johannes Felix},
  title     = {Seasonal weather changes affect the yield and quality of recombinant proteins produced in transgenic tobacco plants in a greenhouse setting},
  series = {Frontiers in Plant Science},
  journal   = {Frontiers in Plant Science},
  number    = {10},
  publisher = {Frontiers Media},
  address   = {Lausanne},
  issn      = {1664-462X (online-ressource)},
  doi       = {10.3389/fpls.2019.01245},
  pages     = {13 Seiten},
  year      = {2019},
  abstract  = {Transgenic plants have the potential to produce recombinant proteins on an agricultural scale, with yields of several tons per year. The cost-effectiveness of transgenic plants increases if simple cultivation facilities such as greenhouses can be used for production. In such a setting, we expressed a novel affinity ligand based on the fluorescent protein DsRed, which we used as a carrier for the linear epitope ELDKWA from the HIV-neutralizing antibody 2F5. The DsRed-2F5-epitope (DFE) fusion protein was produced in 12 consecutive batches of transgenic tobacco (Nicotiana tabacum) plants over the course of 2 years and was purified using a combination of blanching and immobilized metal-ion affinity chromatography (IMAC). The average purity after IMAC was 57 ± 26\% (n = 24) in terms of total soluble protein, but the average yield of pure DFE (12 mg kg-1) showed substantial variation (± 97 mg kg-1, n = 24) which correlated with seasonal changes. Specifically, we found that temperature peaks (>28°C) and intense illuminance (>45 klx h-1) were associated with lower DFE yields after purification, reflecting the loss of the epitope-containing C-terminus in up to 90\% of the product. Whereas the weather factors were of limited use to predict product yields of individual harvests conducted for each batch (spaced by 1 week), the average batch yields were well approximated by simple linear regression models using two independent variables for prediction (illuminance and plant age). Interestingly, accumulation levels determined by fluorescence analysis were not affected by weather conditions but positively correlated with plant age, suggesting that the product was still expressed at high levels, but the extreme conditions affected its stability, albeit still preserving the fluorophore function. The efficient production of intact recombinant proteins in plants may therefore require adequate climate control and shading in greenhouses or even cultivation in fully controlled indoor farms.},
  language  = {en}
}
@article{BandlitzNakhoulKotliar2022,
  author    = {Bandlitz, Stefan and Nakhoul, Makram and Kotliar, Konstantin},
  title     = {Daily variations of corneal white-to-white diameter measured with different methods},
  series = {Clinical and experimental optometry},
  journal   = {Clinical and experimental optometry},
  number    = {14},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {0816-4622},
  doi       = {10.2147/OPTO.S360651},
  pages     = {173 -- 181},
  year      = {2022},
  abstract  = {Purpose: A precise determination of the corneal diameter is essential for the diagnosis of various ocular diseases, cataract and refractive surgery as well as for the selection and fitting of contact lenses. The aim of this study was to investigate the agreement between two automatic and one manual method for corneal diameter determination and to evaluate possible diurnal variations in corneal diameter. Patients and Methods: Horizontal white-to-white corneal diameter of 20 volunteers was measured at three different fixed times of a day with three methods: Scheimpflug method (Pentacam HR, Oculus), placido based topography (Keratograph 5M, Oculus) and manual method using an image analysis software at a slitlamp (BQ900, Haag-Streit). Results: The two-factorial analysis of variance could not show a significant effect of the different instruments (p = 0.117), the different time points (p = 0.506) and the interaction between instrument and time point (p = 0.182). Very good repeatability (intraclass correlation coefficient ICC, quartile coefficient of dispersion QCD) was found for all three devices. However, manual slitlamp measurements showed a higher QCD than the automatic measurements with the Keratograph 5M and the Pentacam HR at all measurement times. Conclusion: The manual and automated methods used in the study to determine corneal diameter showed good agreement and repeatability. No significant diurnal variations of corneal diameter were observed during the period of time studied.},
  language  = {en}
}
@article{HeinrichsPietrzykZiemons2003,
  author    = {Heinrichs, U. and Pietrzyk, Uwe and Ziemons, Karl},
  title     = {Design optimization of the PMT-ClearPET prototypes based on simulation studies with GEANT3},
  series = {2002 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  journal   = {2002 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  issn      = {1082-3654},
  pages     = {682 -- 686},
  year      = {2003},
  abstract  = {Within the Crystal Clear Collaboration four centres are developing 2nd generation high performance small animal PET scanners for different kinds of animals and medical applications. The first prototypes are PMT-based systems including depth of interaction (DOI) detection by using a phoswich layer of LSO and LuYAP. The aim of these simulation studies is to optimize sensitivity and spatial resolution of given designs, which vary in FOVs caused by different detector configurations (ring/octagon) and sizes. For this purpose the simulation tool GEANT3 (CERN) was used. The simulations have shown that all PMT designs with one-to-one coupling of crystals have a very nonlinear axial sensitivity profile. By shifting every other PMT 1/4 of a PMT length in axial direction the sampling of the FOVs became more homogeneous. At an energy threshold of 350keV the regression coefficient increases from 0.818 for the non-shifted to 0.993 for the shifted design. Simulations of a point source centred in the FOV (threshold: 350keV) resulted in sensitivities of 4.2\% for a 4×20PMT (LSO/LuYAP a 10mm) and 3.8\% for a 4×16PMT (LSO/LuYAP a 8mm) ring design. The 3D-MLEM reconstruction of a point source shows the enormous improvement of resolution using a crystal double layer with DOI (3.1mm at 40mm from CFOV) instead of a 20mm single layer (11.9mm).},
  language  = {en}
}
@article{LustfeldPithanReissel2012,
  author    = {Lustfeld, Hans and Pithan, C. and Reißel, Martin},
  title     = {Metallic electrolyte composites in the framework of the brick-layer model},
  series = {Journal of the European Ceramic Society},
  volume    = {32},
  journal   = {Journal of the European Ceramic Society},
  number    = {4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0955-2219},
  doi       = {10.1016/j.jeurceramsoc.2011.10.017},
  pages     = {859 -- 864},
  year      = {2012},
  abstract  = {It is well known that the already large dielectric constants of some electrolytes like BaTiO₃ can be enhanced further by adding metallic (e.g. Ni, Cu or Ag) nanoparticles. The enhancement can be quite large, a factor of more than 1000 is possible. The consequences for the properties will be discussed in the present paper applying a brick-layer model (BLM) for calculating dc-resistivities of thin layers and a modified one (PBLM) that includes percolation for calculating dielectric properties of these materials. The PBLM results in an at least qualitative description and understanding of the physical phenomena: This model gives an explanation for the steep increase of the dielectric constant below the percolation threshold and why this increase is connected to a dramatic decrease of the breakdown voltage as well as the ability of storing electrical energy. We conclude that metallic electrolyte composites like BaTiO₃ are not appropriate for energy storage.},
  language  = {en}
}
@article{Frings2010,
  author    = {Frings, Michael},
  title     = {Das neue Recht der Zahlungsdienste},
  series = {NWB Steuer- und Wirtschaftsrecht},
  journal   = {NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {1151 -- 1159},
  year      = {2010},
  language  = {de}
}
@article{Frings2010,
  author    = {Frings, Michael},
  title     = {Das neue Recht des Verbraucherkredits},
  series = {NWB Steuer- und Wirtschaftsrecht},
  journal   = {NWB Steuer- und Wirtschaftsrecht},
  number    = {20},
  publisher = {NWB-Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {1608 -- 1617},
  year      = {2010},
  language  = {de}
}
@article{DachwaldMikuckiTulaczyketal.2014,
  author    = {Dachwald, Bernd and Mikucki, Jill and Tulaczyk, Slawek and Digel, Ilya and Espe, Clemens and Feldmann, Marco and Francke, Gero and Kowalski, Julia and Xu, Changsheng},
  title     = {IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems},
  series = {Annals of Glaciology},
  volume    = {55},
  journal   = {Annals of Glaciology},
  number    = {65},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  issn      = {1727-5644},
  doi       = {10.3189/2014AoG65A004},
  pages     = {14 -- 22},
  year      = {2014},
  abstract  = {There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.},
  language  = {en}
}
@article{MurganBeyerKotliaretal.2013,
  author    = {Murgan, Ilina and Beyer, Sonja and Kotliar, Konstantin and Weber, Lutz and Bechtold-Dalla Pozza, Susanne and Dalla Pozza, Robert and Wegner, Aharon and Sitnikova, Diana and Stock, Konrad and Heemann, Uwe and Schmaderer, Christoph and Baumann, Marcus},
  title     = {Arterial and Retinal Vascular Changes in Hypertensive and Prehypertensive Adolescents},
  series = {American Journal of Hypertension},
  volume    = {26},
  journal   = {American Journal of Hypertension},
  number    = {3},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1941-7225},
  pages     = {400 -- 408},
  year      = {2013},
  language  = {de}
}
@article{RoethSlabuKolvenbachetal.2015,
  author    = {R{\"o}th, Anjali A. and Slabu, Ioana and Kolvenbach, K. and Engelmann, Ulrich M. and Baumann, Martin and Schmitz-Rode, T. and Trahms, L. and Neumann, U.},
  title     = {Aufnahmekinetik von magnetischen Nanopartikeln zur Tumortherapie in humanen Pankreaskarzinomzelllinien},
  series = {Zeitschrift f{\"u}r Gastroenterologie},
  volume    = {53},
  journal   = {Zeitschrift f{\"u}r Gastroenterologie},
  number    = {8},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {1439-7803},
  doi       = {10.1055/s-0035-1559529},
  pages     = {KC139},
  year      = {2015},
  language  = {de}
}
@article{SchmidtForkmannSchultzetal.2019,
  author    = {Schmidt, Katharina and Forkmann, Katarina and Schultz, Heidrun and Gratz, Marcel and Bitz, Andreas and Wiech, Katja and Bingel, Ulrike},
  title     = {Enhanced Neural Reinstatement for Evoked Facial Pain Compared With Evoked Hand Pain},
  series = {The Journal of Pain},
  journal   = {The Journal of Pain},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1526-5900},
  doi       = {10.1016/j.jpain.2019.03.003},
  year      = {2019},
  language  = {en}
}
@article{KotliarHanssenEberhardtetal.2013,
  author    = {Kotliar, Konstantin and Hanssen, Henner and Eberhardt, Karla and Vilser, Walthard and Schmaderer, Christoph and Halle, Martin and Heemann, Uwe and Baumann, Marcus},
  title     = {Retinal pulse wave velocity in young male normotensive and mildly hypertensive subjects},
  series = {Microcirculation},
  journal   = {Microcirculation},
  publisher = {Wiley},
  address   = {Malden},
  issn      = {1549-8719},
  year      = {2013},
  language  = {en}
}
@article{SchmidtForkmannSinkeetal.2016,
  author    = {Schmidt, Katharina and Forkmann, Katarina and Sinke, C. and Gratz, Marcel and Bitz, Andreas and Bingel, Ulrike},
  title     = {The differential effect of trigeminal vs. peripheral pain stimulation on visual processing and memory encoding is influenced by pain-related fear},
  series = {NeuroImage},
  volume    = {134},
  journal   = {NeuroImage},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1053-8119},
  doi       = {10.1016/j.neuroimage.2016.03.026},
  pages     = {386 -- 395},
  year      = {2016},
  abstract  = {Compared to peripheral pain, trigeminal pain elicits higher levels of fear, which is assumed to enhance the interruptive effects of pain on concomitant cognitive processes. In this fMRI study we examined the behavioral and neural effects of trigeminal (forehead) and peripheral (hand) pain on visual processing and memory encoding. Cerebral activity was measured in 23 healthy subjects performing a visual categorization task that was immediately followed by a surprise recognition task. During the categorization task subjects received concomitant noxious electrical stimulation on the forehead or hand. Our data show that fear ratings were significantly higher for trigeminal pain. Categorization and recognition performance did not differ between pictures that were presented with trigeminal and peripheral pain. However, object categorization in the presence of trigeminal pain was associated with stronger activity in task-relevant visual areas (lateral occipital complex, LOC), memory encoding areas (hippocampus and parahippocampus) and areas implicated in emotional processing (amygdala) compared to peripheral pain. Further, individual differences in neural activation between the trigeminal and the peripheral condition were positively related to differences in fear ratings between both conditions. Functional connectivity between amygdala and LOC was increased during trigeminal compared to peripheral painful stimulation. Fear-driven compensatory resource activation seems to be enhanced for trigeminal stimuli, presumably due to their exceptional biological relevance.},
  language  = {en}
}
@article{BalakrishnanAndreiSelmerSelmeretal.2010,
  author    = {Balakrishnan, Karthikeyan and Andrei-Selmer, Luminita-Cornelia and Selmer, Thorsten and Bacher, Michael and Dodel, Richard},
  title     = {Comparison of intravenous immunoglobulins for naturally occurring autoantibodies against amyloid-β},
  series = {Journal of Alzheimer's Disease},
  volume    = {20},
  journal   = {Journal of Alzheimer's Disease},
  number    = {1},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1387-2877},
  doi       = {10.3233/JAD-2010-1353},
  pages     = {135 -- 143},
  year      = {2010},
  abstract  = {Intravenous immunoglobulins (IVIG) are currently used for therapeutic purposes in autoimmune disorders. Recently, we demonstrated the presence of naturally occurring antibodies against amyloid- β (nAbs-Aβ) within the pool of IVIG. In this study, we compared different brands of IVIG for nAbs-Aβ and have found differences in the specificity of the nAbs-Aβ towards Aβ1-40 and Aβ1-42 . We analyzed the influence of a pH-shift over the course of antibody storage using ELISA and investigated antibody dimerization at acidic and neutral pH as well as differences in the IgG subclass distributions among the IVIG using both HPLC and a nephelometric assay. Furthermore, we investigated the epitope region of purified nAbs-Aβ. The differences found in Aβ specificity are not directly proportionate to the binding nature of these antibodies when administered in vivo. This information, however, may serve as a guide when choosing the commercial source of IVIG for therapeutic applications in Alzheimer's disease},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2010,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Solar tower power plant in Germany and future perspectives of the development of the technology in Greece and Cyprus},
  series = {Renewable Energy},
  volume    = {35},
  journal   = {Renewable Energy},
  number    = {7},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2009.11.003},
  pages     = {1352 -- 1356},
  year      = {2010},
  abstract  = {Since the 80s power production with solar thermal power plants has been a way to substitute fossil fuels. By concentrating direct solar radiation from heliostats very high temperatures of a thermal fluid can be reached. The resulting heat is converted to mechanical energy in a steam cycle which generates electricity. High efficiencies and fast start-up are reached by using air as a heat medium, as well as using porous ceramic materials as solar receiver of the concentrated sunlight. In Germany the construction of a 1.5 MWe solar tower power plant began in 2008. It is operational since December 2008 and started production of electricity in the spring of 2009. In Greece and Cyprus, countries with high solar potential, the development of this competitive solar thermal technology is imperative, since it has already been implemented in other Mediterranean countries.},
  language  = {en}
}
@article{OrzadaSolbachGratzetal.2019,
  author    = {Orzada, Stephan and Solbach, Klaus and Gratz, Marcel and Brunheim, Sascha and Fiedler, Thomas M. and Johst, S{\"o}ren and Bitz, Andreas and Shooshtary, Samaneh and Abuelhaija, Ashraf and Voelker, Maximilian N. and Rietsch, Stefan H. G. and Kraff, Oliver and Maderwald, Stefan and Fl{\"o}ser, Martina and Oehmingen, Mark and Quick, Harald H. and Ladd, Mark E.},
  title     = {A 32-channel parallel transmit system add-on for 7T MRI},
  series = {Plos one},
  journal   = {Plos one},
  doi       = {10.1371/journal.pone.0222452},
  year      = {2019},
  language  = {en}
}
@article{RietschBrunheimOrzadaetal.2019,
  author    = {Rietsch, Stefan H. G. and Brunheim, Sascha and Orzada, Stephan and Voelker, Maximilian N. and Maderwald, Stefan and Bitz, Andreas and Gratz, Marcel and Ladd, Mark E. and Quick, Harald H.},
  title     = {Development and evaluation of a 16-channel receive-only RF coil to improve 7T ultra-high field body MRI with focus on the spine},
  series = {Magnetic Resonance in Medicine},
  journal   = {Magnetic Resonance in Medicine},
  number    = {Early view},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.27731},
  year      = {2019},
  language  = {en}
}
@article{RoethSlabuEngelmannetal.2017,
  author    = {R{\"o}th, Anjali A. and Slabu, Ioana and Engelmann, Ulrich M. and Baumann, Martin and Schmitz-Rode, T. and Neumann, U. P.},
  title     = {Targeting von gastroenterologischen Tumoren mittels magnetischer Nanopartikel zur hyperthermischen Therapie},
  series = {Zeitschrift f{\"u}r Gastroenterologie},
  volume    = {55},
  journal   = {Zeitschrift f{\"u}r Gastroenterologie},
  number    = {8},
  publisher = {Thieme},
  address   = {Stuttgart},
  doi       = {10.1055/s-0037-1605124},
  pages     = {KV-384},
  year      = {2017},
  language  = {de}
}
@article{MikuckiSchulerDigeletal.2023,
  author    = {Mikucki, Jill Ann and Schuler, C. G. and Digel, Ilya and Kowalski, Julia and Tuttle, M. J. and Chua, Michelle and Davis, R. and Purcell, Alicia and Ghosh, D. and Francke, G. and Feldmann, Marco and Espe, C. and Heinen, Dirk and Dachwald, Bernd and Clemens, Joachim and Lyons, W. B. and Tulaczyk, S.},
  title     = {Field-Based planetary protection operations for melt probes: validation of clean access into the blood falls, antarctica, englacial ecosystem},
  series = {Astrobiology},
  volume    = {23},
  journal   = {Astrobiology},
  number    = {11},
  publisher = {Liebert},
  address   = {New York, NY},
  issn      = {1557-8070 (online)},
  doi       = {10.1089/ast.2021.0102},
  pages     = {1165 -- 1178},
  year      = {2023},
  abstract  = {Subglacial environments on Earth offer important analogs to Ocean World targets in our solar system. These unique microbial ecosystems remain understudied due to the challenges of access through thick glacial ice (tens to hundreds of meters). Additionally, sub-ice collections must be conducted in a clean manner to ensure sample integrity for downstream microbiological and geochemical analyses. We describe the field-based cleaning of a melt probe that was used to collect brine samples from within a glacier conduit at Blood Falls, Antarctica, for geomicrobiological studies. We used a thermoelectric melting probe called the IceMole that was designed to be minimally invasive in that the logistical requirements in support of drilling operations were small and the probe could be cleaned, even in a remote field setting, so as to minimize potential contamination. In our study, the exterior bioburden on the IceMole was reduced to levels measured in most clean rooms, and below that of the ice surrounding our sampling target. Potential microbial contaminants were identified during the cleaning process; however, very few were detected in the final englacial sample collected with the IceMole and were present in extremely low abundances (∼0.063\% of 16S rRNA gene amplicon sequences). This cleaning protocol can help minimize contamination when working in remote field locations, support microbiological sampling of terrestrial subglacial environments using melting probes, and help inform planetary protection challenges for Ocean World analog mission concepts.},
  language  = {en}
}