@article{AlbrachtArampatzis2006,
  author    = {Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Influence of the mechanical properties of the muscle-tendon unit on force generation in runners with different running economy},
  series = {Biological Cybernetics},
  volume    = {95},
  journal   = {Biological Cybernetics},
  number    = {1},
  issn      = {1432-0770},
  doi       = {10.1007/s00422-006-0070-z},
  pages     = {87 -- 96},
  year      = {2006},
  language  = {en}
}
@article{AlebouyehSamamiPieperBreitbachetal.2014,
  author    = {Alebouyeh Samami, Behzad and Pieper, Martin and Breitbach, Gerd and Hodapp, Josef},
  title     = {Heat production in the windings of the stators of electric machines under stationary condition},
  series = {Heat and mass transfer},
  volume    = {50},
  journal   = {Heat and mass transfer},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0947-7411 (Print) ; 1432-1181 (E-Journal)},
  doi       = {10.1007/s00231-014-1371-8},
  pages     = {1707 -- 1716},
  year      = {2014},
  abstract  = {In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.},
  language  = {en}
}
@article{AletseeBaumann1991,
  author    = {Aletsee, Ludwig and Baumann, Marcus},
  title     = {A laboratory incubator equipped with facilities to automatically simulate natural irradiance},
  series = {Boletim do Instituto Oceanogr{\´a}fico / Universidade de S{\~a}o Paulo},
  volume    = {Vol. 39},
  journal   = {Boletim do Instituto Oceanogr{\´a}fico / Universidade de S{\~a}o Paulo},
  number    = {No. 2},
  issn      = {1982-436X; 0080-6331},
  pages     = {155 -- 159},
  year      = {1991},
  language  = {en}
}
@article{Alexopoulos2012,
  author    = {Alexopoulos, Spiros},
  title     = {Biogas systems: basics, biogas multifunction, principle of fermentation and hybrid application with a solar tower for the treatment of waste animal manure},
  series = {Journal of Engineering Science and Technology Review},
  volume    = {5},
  journal   = {Journal of Engineering Science and Technology Review},
  number    = {4},
  issn      = {1791-2377},
  pages     = {48 -- 55},
  year      = {2012},
  abstract  = {Two of the main environmental problems of today's society are the continuously increasing production of organic wastes as well as the increase of carbon dioxide in the atmosphere and the related green house effect. A way to solve these problems is the production of biogas. Biogas is a combustible gas consisting of methane, carbon dioxide and small amounts of other gases and trace elements. Production of biogas through anaerobic digestion of animal manure and slurries as well as of a wide range of digestible organic wastes and agricultural residues, converts these substrates into electricity and heat and offers a natural fertiliser for agriculture. The microbiological process of decomposition of organic matter, in the absence of oxygen takes place in reactors, called digesters. Biogas can be used as a fuel in a gas turbine or burner and can be used in a hybrid solar tower system offering a solution for waste treatment of agricultural and animal residues. A solar tower system consists of a heliostat field, which concentrates direct solar irradiation on an open volumetric central receiver. The receiver heats up ambient air to temperatures of around 700°C. The hot air's heat energy is transferred to a steam Rankine cycle in a heat recovery steam generator (HRSG). The steam drives a steam turbine, which in turn drives a generator for producing electricity. In order to increase the operational hours of a solar tower power plant, a heat storage system and/ or hybridization may be considered. The advantage of solar-fossil hybrid power plants, compared to solar-only systems, lies in low additional investment costs due to an adaptable solar share and reduced technical and economical risks. On sunny days the hybrid system operates in a solar-only mode with the central receiver and on cloudy days and at night with the gas turbine only. As an alternative to methane gas, environmentally neutral biogas can be used for operating the gas turbine. Hence, the hybrid system is operated to 100\% from renewable energy sources},
  language  = {en}
}
@article{Alexopoulos2015,
  author    = {Alexopoulos, Spiros},
  title     = {Simulation model for the transient process behaviour of solar aluminium recycling in a rotary kiln},
  series = {Applied Thermal Engineering},
  volume    = {78},
  journal   = {Applied Thermal Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-4311},
  doi       = {10.1016/j.applthermaleng.2015.01.007},
  pages     = {387 -- 396},
  year      = {2015},
  language  = {en}
}
@article{AlexopoulosBreitbachHoffschmidtetal.2008,
  author    = {Alexopoulos, Spiros and Breitbach, Gerd and Hoffschmidt, Bernhard and Stobbe, P.},
  title     = {Computational fluid flow of porous resic ceramic filtering modules and optimization of the channel edge form geometry},
  series = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2},
  journal   = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2},
  publisher = {Filtech Exhibitions},
  address   = {Meerbusch},
  pages     = {300 -- 304},
  year      = {2008},
  language  = {en}
}
@article{AlexopoulosBreitbachHoffschmidtetal.2008,
  author    = {Alexopoulos, Spiros and Breitbach, Gerd and Hoffschmidt, Bernhard and Stobbe, P.},
  title     = {Optimization of the geometry of porous SiC ceramic filtering modules using numerical methods},
  series = {Developments in porous, biological and geopolymer ceramics : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21 - 26, 2007, Daytona Beach, Florida ; [papers presented at the Symposium on Porous Ceramics: Novel Developments and Applications] / ed.: Manuel Brito ... Vol. ed.: Jonathan Salem ... The American Ceramics Society},
  journal   = {Developments in porous, biological and geopolymer ceramics : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21 - 26, 2007, Daytona Beach, Florida ; [papers presented at the Symposium on Porous Ceramics: Novel Developments and Applications] / ed.: Manuel Brito ... Vol. ed.: Jonathan Salem ... The American Ceramics Society},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  isbn      = {9780470196403},
  pages     = {95 -- 104},
  year      = {2008},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2010,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Solar tower power plant in Germany and future perspectives of the development of the technology in Greece and Cyprus},
  series = {Renewable Energy . 35 (2010), H. 7},
  journal   = {Renewable Energy . 35 (2010), H. 7},
  isbn      = {0960-1481},
  pages     = {1352 -- 1356},
  year      = {2010},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2010,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Solarthermische Kraftwerke mit thermischen Speichern},
  series = {Chemie Ingenieur Technik. 82 (2010), H. 9},
  journal   = {Chemie Ingenieur Technik. 82 (2010), H. 9},
  isbn      = {1522-2640},
  pages     = {1606 -- 1606},
  year      = {2010},
  language  = {de}
}
@article{AlexopoulosHoffschmidt2017,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Advances in solar tower technology},
  series = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  volume    = {6},
  journal   = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  number    = {1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2041-840X},
  doi       = {10.1002/wene.217},
  pages     = {1 -- 19},
  year      = {2017},
  language  = {en}
}
@article{AlexyukBogoyavlenskiyAlexyuketal.2021,
  author    = {Alexyuk, Madina and Bogoyavlenskiy, Andrey and Alexyuk, Pavel and Moldakhanov, Yergali and Berezin, Vladimir and Digel, Ilya},
  title     = {Epipelagic microbiome of the Small Aral Sea: Metagenomic structure and ecological diversity},
  series = {MicrobiologyOpen},
  volume    = {10},
  journal   = {MicrobiologyOpen},
  number    = {1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2045-8827},
  doi       = {10.1002/mbo3.1142},
  pages     = {1 -- 10},
  year      = {2021},
  abstract  = {Microbial diversity studies regarding the aquatic communities that experienced or are experiencing environmental problems are essential for the comprehension of the remediation dynamics. In this pilot study, we present data on the phylogenetic and ecological structure of microorganisms from epipelagic water samples collected in the Small Aral Sea (SAS). The raw data were generated by massive parallel sequencing using the shotgun approach. As expected, most of the identified DNA sequences belonged to Terrabacteria and Actinobacteria (40\% and 37\% of the total reads, respectively). The occurrence of Deinococcus-Thermus, Armatimonadetes, Chloroflexi in the epipelagic SAS waters was less anticipated. Surprising was also the detection of sequences, which are characteristic for strict anaerobes—Ignavibacteria, hydrogen-oxidizing bacteria, and archaeal methanogenic species. We suppose that the observed very broad range of phylogenetic and ecological features displayed by the SAS reads demonstrates a more intensive mixing of water masses originating from diverse ecological niches of the Aral-Syr Darya River basin than presumed before.},
  language  = {en}
}
@article{AlhwarinFerreinScholl2014,
  author    = {Alhwarin, Faraj and Ferrein, Alexander and Scholl, Ingrid},
  title     = {IR stereo kinect: improving depth images by combining structured light with IR stereo},
  pages     = {1 -- 9},
  year      = {2014},
  language  = {en}
}
@article{AllefeldBialonski2007,
  author    = {Allefeld, Carsten and Bialonski, Stephan},
  title     = {Detecting synchronization clusters in multivariate time series via coarse-graining of Markov chains},
  series = {Physical Review E},
  volume    = {76},
  journal   = {Physical Review E},
  number    = {6},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.76.066207},
  pages     = {066207},
  year      = {2007},
  language  = {en}
}
@article{AlmajhdiSengerAmeretal.2014,
  author    = {Almajhdi, Fahad N. and Senger, Tilo and Amer, Haitham M. and Gissmann, Lutz and {\"O}hlschl{\"a}ger, Peter},
  title     = {Design of a highly effective therapeutic HPV16 E6/E7-specific DNA vaccine: optimization by different ways of sequence rearrangements (Shuffling)},
  series = {PLOS one},
  volume    = {11},
  journal   = {PLOS one},
  number    = {9},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0113461},
  pages     = {e113461},
  year      = {2014},
  abstract  = {Persistent infection with the high-risk Human Papillomavirus type 16 (HPV 16) is the causative event for the development of cervical cancer and other malignant tumors of the anogenital tract and of the head and neck. Despite many attempts to develop therapeutic vaccines no candidate has entered late clinical trials. An interesting approach is a DNA based vaccine encompassing the nucleotide sequence of the E6 and E7 viral oncoproteins. Because both proteins are consistently expressed in HPV infected cells they represent excellent targets for immune therapy. Here we report the development of 8 DNA vaccine candidates consisting of differently rearranged HPV-16 E6 and E7 sequences within one molecule providing all naturally occurring epitopes but supposedly lacking transforming activity. The HPV sequences were fused to the J-domain and the SV40 enhancer in order to increase immune responses. We demonstrate that one out of the 8 vaccine candidates induces very strong cellular E6- and E7- specific cellular immune responses in mice and, as shown in regression experiments, efficiently controls growth of HPV 16 positive syngeneic tumors. This data demonstrates the potential of this vaccine candidate to control persistent HPV 16 infection that may lead to malignant disease. It also suggests that different sequence rearrangements influence the immunogenecity by an as yet unknown mechanism.},
  language  = {en}
}
@article{AlnemerKotliarNeuhausetal.2023,
  author    = {Alnemer, Momin Sami Mohammad and Kotliar, Konstantin and Neuhaus, Valentin and Pape, Hans-Christoph and Ciritsis, Bernhard D.},
  title     = {Cost-effectiveness analysis of surgical proximal femur fracture prevention in elderly: a Markov cohort simulation model},
  series = {Cost Effectiveness and Resource Allocation},
  journal   = {Cost Effectiveness and Resource Allocation},
  number    = {21, Article number: 77},
  publisher = {Springer Nature},
  issn      = {1478-7547},
  doi       = {10.1186/s12962-023-00482-4},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Background Hip fractures are a common and costly health problem, resulting in significant morbidity and mortality, as well as high costs for healthcare systems, especially for the elderly. Implementing surgical preventive strategies has the potential to improve the quality of life and reduce the burden on healthcare resources, particularly in the long term. However, there are currently limited guidelines for standardizing hip fracture prophylaxis practices. Methods This study used a cost-effectiveness analysis with a finite-state Markov model and cohort simulation to evaluate the primary and secondary surgical prevention of hip fractures in the elderly. Patients aged 60 to 90 years were simulated in two different models (A and B) to assess prevention at different levels. Model A assumed prophylaxis was performed during the fracture operation on the contralateral side, while Model B included individuals with high fracture risk factors. Costs were obtained from the Centers for Medicare \& Medicaid Services, and transition probabilities and health state utilities were derived from available literature. The baseline assumption was a 10\% reduction in fracture risk after prophylaxis. A sensitivity analysis was also conducted to assess the reliability and variability of the results. Results With a 10\% fracture risk reduction, model A costs between \$8,850 and \$46,940 per quality-adjusted life-year (\$/QALY). Additionally, it proved most cost-effective in the age range between 61 and 81 years. The sensitivity analysis established that a reduction of ≥ 2.8\% is needed for prophylaxis to be definitely cost-effective. The cost-effectiveness at the secondary prevention level was most sensitive to the cost of the contralateral side's prophylaxis, the patient's age, and fracture treatment cost. For high-risk patients with no fracture history, the cost-effectiveness of a preventive strategy depends on their risk profile. In the baseline analysis, the incremental cost-effectiveness ratio at the primary prevention level varied between \$11,000/QALY and \$74,000/QALY, which is below the defined willingness to pay threshold. Conclusion Due to the high cost of hip fracture treatment and its increased morbidity, surgical prophylaxis strategies have demonstrated that they can significantly relieve the healthcare system. Various key assumptions facilitated the modeling, allowing for adequate room for uncertainty. Further research is needed to evaluate health-state-associated risks.},
  language  = {en}
}
@article{Alt1970,
  author    = {Alt, Helmut},
  title     = {Entwicklungstendenzen der Sicherheit und der notwendigen Reserveleistung beim Verbundbetrieb der Kraftwerke},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {69},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {25},
  publisher = {VWEW-Energieverlag},
  address   = {Frankfurt/Main},
  issn      = {0013-5496},
  pages     = {672 -- 678},
  year      = {1970},
  language  = {de}
}
@article{Alt1972,
  author    = {Alt, Helmut},
  title     = {Digitale Berechnung der Betriebsdiagramme von Hochspannungsleitungen},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {71},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {4},
  publisher = {VWEW-Energieverlag},
  address   = {Frankfurt/Main},
  issn      = {0013-5496},
  pages     = {87 -- 92},
  year      = {1972},
  language  = {de}
}
@article{Alt1974,
  author    = {Alt, Helmut},
  title     = {Auswertung von Pr{\"u}fungsergebnissen auf elektronischen Rechenanlagen},
  series = {Angewandte Informatik},
  volume    = {16},
  journal   = {Angewandte Informatik},
  number    = {5},
  publisher = {Vieweg},
  address   = {Braunschweig},
  issn      = {0013-5704},
  pages     = {219 -- 222},
  year      = {1974},
  language  = {de}
}
@article{Alt1978,
  author    = {Alt, Helmut},
  title     = {Tabellenfreie Berechnung der Einkommensteuer mit Hilfe des programmierbaren Taschenrechners},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {77},
  journal   = {Elektrizit{\"a}tswirtschaft},
  publisher = {VWEW-Energieverlag},
  address   = {Frankfurt/Main},
  issn      = {0013-5496},
  pages     = {486 -- 489},
  year      = {1978},
  language  = {de}
}
@article{Alt1978,
  author    = {Alt, Helmut},
  title     = {Wirtschaftlichkeit von Investitionen},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {77},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {3},
  publisher = {VWEW-Energieverlag},
  address   = {Frankfurt/Main},
  issn      = {0013-5496},
  pages     = {73 -- 76},
  year      = {1978},
  language  = {de}
}
@article{Alt1979,
  author    = {Alt, Helmut},
  title     = {Isolierte Freileitungen, ein Betriebsmittel f{\"u}r schwierige Trassenf{\"u}hrung},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 78},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 10},
  issn      = {0013-5496},
  pages     = {250 -- 256},
  year      = {1979},
  language  = {de}
}
@article{Alt1980,
  author    = {Alt, Helmut},
  title     = {Kurzschlußstromberechnung},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 79},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 10},
  issn      = {0013-5496},
  pages     = {379 -- 382},
  year      = {1980},
  language  = {de}
}
@article{Alt1981,
  author    = {Alt, Helmut},
  title     = {Wirtschaftlichkeitsberechnung von Investitionen mit dem programmierbaren Taschenrechner},
  series = {3 R international : RRR ; Rohre, Rohrleitungsbau, Rohrleitungstransport},
  volume    = {Jg. 20},
  journal   = {3 R international : RRR ; Rohre, Rohrleitungsbau, Rohrleitungstransport},
  number    = {H. 10},
  issn      = {0340-3386},
  pages     = {561 -- 565},
  year      = {1981},
  language  = {de}
}
@article{Alt1982,
  author    = {Alt, Helmut},
  title     = {Statische oder dynamische Wirtschaftlichkeitsberechnung bei Investitionen zur Energieeinsparung},
  series = {Elektrow{\"a}rme international Edition B: Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschrift f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  volume    = {Jg. 40},
  journal   = {Elektrow{\"a}rme international Edition B: Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschrift f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  number    = {H. 3/4},
  issn      = {0340-3521},
  pages     = {166 -- 172},
  year      = {1982},
  language  = {de}
}
@article{Alt1983,
  author    = {Alt, Helmut},
  title     = {Einsatz programmierbarer Rechner im Sondervertragskundenbereich der Gasversorgung},
  series = {Das Gas- und Wasserfach : Ausgabe Gas, Erdgas : GWF},
  volume    = {Bd. 124},
  journal   = {Das Gas- und Wasserfach : Ausgabe Gas, Erdgas : GWF},
  number    = {H. 9},
  issn      = {0016-4909},
  pages     = {468 -- 471},
  year      = {1983},
  language  = {de}
}
@article{Alt1978,
  author    = {Alt, Helmut},
  title     = {Intervallschalter mit getrennt einstellbarer Pulszeit und Pulszahl},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {27},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 14},
  publisher = {WEKA Fachmedien},
  address   = {Haar},
  issn      = {0013-5658},
  pages     = {76},
  year      = {1978},
  language  = {de}
}
@article{Alt1983,
  author    = {Alt, Helmut},
  title     = {Auswertung von Belastungskennlinien},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 82},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {208 -- 210},
  year      = {1983},
  language  = {de}
}
@article{Alt1985,
  author    = {Alt, Helmut},
  title     = {Vorteilsausgleich durch Versorgungsunternehmen f{\"u}r Ersatzleistungen Dritter},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 104},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {440 -- 443},
  year      = {1985},
  language  = {de}
}
@article{Alt2005,
  author    = {Alt, Helmut},
  title     = {Wunschphantasie eines eingefleischten Kernenergiegegners : zur Rede von Bundesumweltminister J{\"u}rgen Trittin auf dem VDEW-Kongress 2005 "Die Energieversorgung der Zukunft"},
  series = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  volume    = {Bd. 104},
  journal   = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  number    = {H. 17/18},
  issn      = {0013-5496},
  pages     = {7},
  year      = {2005},
  language  = {de}
}
@article{Alt2005,
  author    = {Alt, Helmut},
  title     = {Versorgungssicherheit und Windenergie : Tatsachen und Fakten statt Mythen und Mysterien},
  series = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  volume    = {Bd. 104},
  journal   = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  number    = {H. 25},
  issn      = {0013-5496},
  pages     = {42 -- 45},
  year      = {2005},
  language  = {de}
}
@article{Alt2011,
  author    = {Alt, Helmut},
  title     = {Die Sonne bestimmt zunehmend die Spannung in der Steckdose : Lastflussberechnung einer Photovoltaikeinspeisung},
  series = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  volume    = {Bd. 110},
  journal   = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  number    = {H. 17/18},
  publisher = {VWEW-Energieverlag},
  address   = {Frankfurt, M.},
  issn      = {0013-5496},
  pages     = {24 -- 29},
  year      = {2011},
  language  = {de}
}
@article{Alt1976,
  author    = {Alt, Helmut},
  title     = {Spannungs-Blindleistungs-Regelung mit gesteuerten Netzkennlinien},
  series = {Elektrotechnische Zeitschrift : Ausgabe A, Zeitschrift f{\"u}r elektrische Energietechnik : ETZ},
  volume    = {97},
  journal   = {Elektrotechnische Zeitschrift : Ausgabe A, Zeitschrift f{\"u}r elektrische Energietechnik : ETZ},
  number    = {7},
  publisher = {VDE-Verlag},
  address   = {Wuppertal},
  issn      = {0302-265x},
  pages     = {441 -- 446},
  year      = {1976},
  language  = {de}
}
@article{Alt1985,
  author    = {Alt, Helmut},
  title     = {Multiplikativ oder additiv? Diskussionsbeitrag zu Preisanpassungsklauseln in der Gaswirtschaft},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {Jg. 35},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  issn      = {0013-743X},
  pages     = {609 -- 611},
  year      = {1985},
  language  = {de}
}
@article{Alt1986,
  author    = {Alt, Helmut},
  title     = {Steuersenkungsgesetz-Auswirkungen und Berechnung},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 85},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {238 -- 242},
  year      = {1986},
  language  = {de}
}
@article{Alt1986,
  author    = {Alt, Helmut},
  title     = {Dialoggesteuerte harmonische Analyse mit dem HP 41},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 85},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 4},
  issn      = {0013-5496},
  pages     = {139 -- 142},
  year      = {1986},
  language  = {de}
}
@article{Alt1986,
  author    = {Alt, Helmut},
  title     = {Dialoggesteuerte harmonische Analyse mit dem HP 41},
  series = {Elektrow{\"a}rme international Edition B : Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschr. f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  volume    = {Jg. 44},
  journal   = {Elektrow{\"a}rme international Edition B : Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschr. f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  number    = {H. 6},
  issn      = {0340-3521},
  pages     = {283 -- 287},
  year      = {1986},
  language  = {de}
}
@article{Alt1986,
  author    = {Alt, Helmut},
  title     = {Dialoggesteuerte Spannungs- und Belastungsberechnung im Netz eines Elektrizit{\"a}tsversorgungsunternehmens},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 85},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 23},
  issn      = {0013-5496},
  pages     = {906 -- 910},
  year      = {1986},
  language  = {de}
}
@article{Alt1987,
  author    = {Alt, Helmut},
  title     = {Effektivzinsberechnung bei industriellen oder gewerblichen Tilgungsdarlehen},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 86},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {592 -- 595},
  year      = {1987},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Steuerreformgesetz 1990},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 88},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 1/2},
  issn      = {0013-5496},
  pages     = {78 -- 83},
  year      = {1989},
  language  = {de}
}
@article{Alt1987,
  author    = {Alt, Helmut},
  title     = {Steuersenkungs-Erweiterungsgesetz 1988 zur Gesamtentlastung der Einkommensteuer},
  series = {Betriebs-Berater : BB ; Zeitschrift f{\"u}r Recht und Wirtschaft},
  volume    = {Vol. 42},
  journal   = {Betriebs-Berater : BB ; Zeitschrift f{\"u}r Recht und Wirtschaft},
  number    = {H. 32},
  issn      = {0340-7918},
  pages     = {2207 -- 2208},
  year      = {1987},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Steuerreformgesetz 1990},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 88},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 2},
  issn      = {0947-0581 (E-Journal); 0340-7918 (Print)},
  pages     = {120 -- 121},
  year      = {1989},
  language  = {de}
}
@article{Alt1990,
  author    = {Alt, Helmut},
  title     = {Energietarifstruktur in Ostdeutschland},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {Bd. 40},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {H. 11},
  issn      = {0013-743X},
  pages     = {782 -- 788},
  year      = {1990},
  language  = {de}
}
@article{Alt1991,
  author    = {Alt, Helmut},
  title     = {Effektivzins und APR},
  series = {Die Bank : Zeitschrift f{\"u}r Bankpolitik und Bankpraxis},
  volume    = {Jg. 31},
  journal   = {Die Bank : Zeitschrift f{\"u}r Bankpolitik und Bankpraxis},
  number    = {H. 4},
  issn      = {0342-3182},
  pages     = {230 -- 231},
  year      = {1991},
  language  = {de}
}
@article{Alt1992,
  author    = {Alt, Helmut},
  title     = {M{\"o}glichkeiten der CO2-Minderung "alternativ" betrachtet},
  series = {Etz : Elektrotechnik \& Automation},
  volume    = {Bd. 113},
  journal   = {Etz : Elektrotechnik \& Automation},
  number    = {H. 6-7},
  issn      = {0170-1711},
  pages     = {400},
  year      = {1992},
  language  = {de}
}
@article{Alt1995,
  author    = {Alt, Helmut},
  title     = {Netzimpedanz- und Oberschwingungsberechnung in Netzen der {\"o}ffentlichen Stromversorgung},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 94},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 4},
  issn      = {0013-5496},
  pages     = {166 -- 174},
  year      = {1995},
  language  = {de}
}
@article{Alt1995,
  author    = {Alt, Helmut},
  title     = {Netzanschlußm{\"o}glichkeiten und energiewirtschaftliche Bewertung von Windkraftanlagen},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 94},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 19},
  issn      = {0013-5496},
  pages     = {1224 -- 1234},
  year      = {1995},
  language  = {de}
}
@article{Alt2000,
  author    = {Alt, Helmut},
  title     = {Benchmark der Netznutzungspreise},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {Bd. 50},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {H. 11},
  issn      = {0013-743X},
  pages     = {846 -- 850},
  year      = {2000},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Die Bedeutung des Effektivzinses in der Finanzwirtschaft},
  series = {Betriebs-Berater : BB : Beil. 14 Finanz-Berater},
  journal   = {Betriebs-Berater : BB : Beil. 14 Finanz-Berater},
  issn      = {0340-7926},
  pages     = {31 -- 32},
  year      = {1989},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Einfluß der Kontof{\"u}hrungsmodelle auf den Effektivzins und die Restschuld bei Annuit{\"a}tendarlehen},
  series = {Betriebs-Berater : BB : Beil. 14 Finanz-Berater},
  journal   = {Betriebs-Berater : BB : Beil. 14 Finanz-Berater},
  issn      = {0340-7926},
  pages     = {32 -- 37},
  year      = {1989},
  language  = {de}
}
@article{Alt2002,
  author    = {Alt, Helmut},
  title     = {Belieferung von Kunden in fremden Netzgebieten},
  series = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  volume    = {Bd. 101},
  journal   = {EW : das Magazin f{\"u}r die Energie-Wirtschaft},
  number    = {H. 1/2},
  issn      = {0013-5496},
  pages     = {26 -- 35},
  year      = {2002},
  language  = {de}
}
@article{Alt1975,
  author    = {Alt, Helmut},
  title     = {Elektro-Brikett-Zentralspeicherheizung soll die Spitzenlast der EVU schonen},
  series = {Energiewirtschaftliche Tagesfragen},
  volume    = {25},
  journal   = {Energiewirtschaftliche Tagesfragen},
  number    = {4},
  publisher = {VDE-Verlag},
  address   = {Berlin},
  issn      = {0720-6240},
  pages     = {148 -- 149},
  year      = {1975},
  language  = {de}
}
@article{Alt1974,
  author    = {Alt, Helmut},
  title     = {Ab 1975 Uranerz aus Rabbit-Lake},
  series = {Energiewirtschaftliche Tagesfragen},
  volume    = {24},
  journal   = {Energiewirtschaftliche Tagesfragen},
  number    = {1/2},
  publisher = {VDE-Verlag},
  address   = {Berlin},
  issn      = {0720-6240},
  pages     = {34},
  year      = {1974},
  language  = {de}
}
@article{Alt1974,
  author    = {Alt, Helmut},
  title     = {1,45 Mrd. DM f{\"u}r die Kohlevergasung},
  series = {Energiewirtschaftliche Tagesfragen},
  volume    = {24},
  journal   = {Energiewirtschaftliche Tagesfragen},
  number    = {5},
  publisher = {VDE-Verlag},
  address   = {Berlin},
  issn      = {0720-6240},
  pages     = {243 -- 244},
  year      = {1974},
  language  = {de}
}
@article{Alt1992,
  author    = {Alt, Helmut},
  title     = {Renditevergleich zwischen Immobilien und Festverzinslichen},
  series = {Die Bank},
  journal   = {Die Bank},
  number    = {H. 2},
  issn      = {0342-3182},
  pages     = {91 -- 92},
  year      = {1992},
  language  = {de}
}
@article{AltayButenwegTaddei2013,
  author    = {Altay, Okyay and Butenweg, Christoph and Taddei, Francesca},
  title     = {Effektivit{\"a}t von Schwingungsd{\"a}mpfern bei Windenergieanlagen},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  volume    = {Band 88},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt},
  number    = {Heft 10},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {S11 -- S17},
  year      = {2013},
  language  = {de}
}
@article{AltherrBroetzDietrichetal.2018,
  author    = {Altherr, Lena and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Kloberdanz, Hermann and Leise, Philipp and Pelz, Peter Franz and Schlemmer, Pia and Schmitt, Andreas},
  title     = {Resilience in mechanical engineering - a concept for controlling uncertainty during design, production and usage phase of load-carrying structures},
  series = {Applied Mechanics and Materials},
  volume    = {885},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  isbn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.885.187},
  pages     = {187 -- 198},
  year      = {2018},
  abstract  = {Resilience as a concept has found its way into different disciplines to describe the ability of an individual or system to withstand and adapt to changes in its environment. In this paper, we provide an overview of the concept in different communities and extend it to the area of mechanical engineering. Furthermore, we present metrics to measure resilience in technical systems and illustrate them by applying them to load-carrying structures. By giving application examples from the Collaborative Research Centre (CRC) 805, we show how the concept of resilience can be used to control uncertainty during different stages of product life.},
  language  = {en}
}
@article{AltherrEdererLorenzetal.2014,
  author    = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp},
  title     = {Experimental validation of an enhanced system synthesis approach},
  series = {Operations Research Proceedings 2014},
  journal   = {Operations Research Proceedings 2014},
  editor    = {L{\"u}bbecke, Marco and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Peis, Britta and Walther, Grit},
  publisher = {Springer},
  address   = {Basel},
  isbn      = {978-3-319-28695-2},
  doi       = {10.1007/978-3-319-28697-6_1},
  pages     = {6},
  year      = {2014},
  abstract  = {Planning the layout and operation of a technical system is a common task for an engineer. Typically, the workflow is divided into consecutive stages: First, the engineer designs the layout of the system, with the help of his experience or of heuristic methods. Secondly, he finds a control strategy which is often optimized by simulation. This usually results in a good operating of an unquestioned sys- tem topology. In contrast, we apply Operations Research (OR) methods to find a cost-optimal solution for both stages simultaneously via mixed integer program- ming (MILP). Technical Operations Research (TOR) allows one to find a provable global optimal solution within the model formulation. However, the modeling error due to the abstraction of physical reality remains unknown. We address this ubiq- uitous problem of OR methods by comparing our computational results with mea- surements in a test rig. For a practical test case we compute a topology and control strategy via MILP and verify that the objectives are met up to a deviation of 8.7\%.},
  language  = {en}
}
@article{AltherrEdererPfetschetal.2018,
  author    = {Altherr, Lena and Ederer, Thorsten and Pfetsch, Marc E. and Pelz, Peter F.},
  title     = {Maschinelles Design eines optimalen Getriebes},
  series = {ATZ - Automobiltechnische Zeitschrift},
  volume    = {120},
  journal   = {ATZ - Automobiltechnische Zeitschrift},
  number    = {10},
  publisher = {Springer Nature},
  address   = {Cham},
  isbn      = {2192-8800},
  doi       = {10.1007/s35148-018-0131-3},
  pages     = {72 -- 77},
  year      = {2018},
  abstract  = {Nahezu 100.000 denkbare Strukturen kann ein Getriebe bei gleicher Funktion aufweisen - je nach Ganganzahl und gefordertem Freiheitsgrad. Mit dem traditionellen Ansatz bei der Entwicklung, einzelne vielversprechende Systemkonfigurationen manuell zu identifizieren und zu vergleichen, k{\"o}nnen leicht innovative und vor allem kostenminimale L{\"o}sungen {\"u}bersehen werden. Im Rahmen eines Forschungsprojekts hat die TU Darmstadt spezielle Optimierungsmethoden angewendet, um auch bei großen L{\"o}sungsr{\"a}umen zielsicher ein f{\"u}r die individuellen Zielstellungen optimales Layout zu finden.},
  language  = {de}
}
@article{AltherrEdererPoettgenetal.2015,
  author    = {Altherr, Lena and Ederer, Thorsten and P{\"o}ttgen, Philipp and Lorenz, Ulf and Pelz, Peter F.},
  title     = {Multicriterial optimization of technical systems considering multiple load and availability scenarios},
  series = {Applied Mechanics and Materials},
  volume    = {807},
  journal   = {Applied Mechanics and Materials},
  editor    = {Pelz, Peter F. and Groche, Peter},
  isbn      = {1660-9336},
  doi       = {10.4028/www.scientific.net/AMM.807.247},
  pages     = {247 -- 256},
  year      = {2015},
  abstract  = {Cheap does not imply cost-effective -- this is rule number one of zeitgeisty system design. The initial investment accounts only for a small portion of the lifecycle costs of a technical system. In fluid systems, about ninety percent of the total costs are caused by other factors like power consumption and maintenance. With modern optimization methods, it is already possible to plan an optimal technical system considering multiple objectives. In this paper, we focus on an often neglected contribution to the lifecycle costs: downtime costs due to spontaneous failures. Consequently, availability becomes an issue.},
  language  = {en}
}
@article{AltherrJoggerstLeiseetal.2018,
  author    = {Altherr, Lena and Joggerst, Laura and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas and Wendt, Janine},
  title     = {On obligations in the development process of resilient systems with algorithmic design methods},
  series = {Applied Mechanics and Materials},
  volume    = {885},
  journal   = {Applied Mechanics and Materials},
  number    = {885},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  isbn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.885.240},
  pages     = {240 -- 252},
  year      = {2018},
  abstract  = {Advanced computational methods are needed both for the design of large systems and to compute high accuracy solutions. Such methods are efficient in computation, but the validation of results is very complex, and highly skilled auditors are needed to verify them. We investigate legal questions concerning obligations in the development phase, especially for technical systems developed using advanced methods. In particular, we consider methods of resilient and robust optimization. With these techniques, high performance solutions can be found, despite a high variety of input parameters. However, given the novelty of these methods, it is uncertain whether legal obligations are being met. The aim of this paper is to discuss if and how the choice of a specific computational method affects the developer's product liability. The review of legal obligations in this paper is based on German law and focuses on the requirements that must be met during the design and development process.},
  language  = {en}
}
@article{AltherrLeisePfetschetal.2018,
  author    = {Altherr, Lena and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas},
  title     = {Algorithmic design and resilience assessment of energy efficient high-rise water supply systems},
  series = {Applied Mechanics and Materials},
  volume    = {885},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.885.211},
  pages     = {211 -- 223},
  year      = {2018},
  abstract  = {High-rise water supply systems provide water flow and suitable pressure in all levels of tall buildings. To design such state-of-the-art systems, the consideration of energy efficiency and the anticipation of component failures are mandatory. In this paper, we use Mixed-Integer Nonlinear Programming to compute an optimal placement of pipes and pumps, as well as an optimal control strategy.Moreover, we consider the resilience of the system to pump failures. A resilient system is able to fulfill a predefined minimum functionality even though components fail or are restricted in their normal usage. We present models to measure and optimize the resilience. To demonstrate our approach, we design and analyze an optimal resilient decentralized water supply system inspired by a real-life hotel building.},
  language  = {en}
}
@article{AminTemizArtmannArtmannetal.2009,
  author    = {Amin, Rashid and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Lazarovici, Philip and Lelkes, Peter I.},
  title     = {Permeability of an In Vitro Model of Blood Brain Barrier (BBB)},
  series = {13th International Conference on Biomedical Engineering / Lim, Chwee Teck [Ed.]},
  journal   = {13th International Conference on Biomedical Engineering / Lim, Chwee Teck [Ed.]},
  isbn      = {978-3-540-92841-6},
  pages     = {81 -- 84},
  year      = {2009},
  language  = {en}
}
@article{AndingTabazaStaatetal.2013,
  author    = {Anding, Ralf and Tabaza, Ruth and Staat, Manfred and Trenz, Eva and Lohmann, Philipp and Klinge, Uwe and Kirschner-Hermanns, Ruth},
  title     = {Introducing a method of in vitro testing of different anchoring systems used for female incontinence and prolapse surgery},
  series = {BioMed research international},
  volume    = {Vol. 2013},
  journal   = {BioMed research international},
  issn      = {1110-7251 (E-Journal); 2314-6141 (E-Journal); 1110-7243 (Print); 2314-6133 (Print)},
  pages     = {Article ID 401417},
  year      = {2013},
  language  = {en}
}
@article{AngermannGuenthnerHanssenetal.2022,
  author    = {Angermann, Susanne and G{\"u}nthner, Roman and Hanssen, Henner and Lorenz, Georg and Braunisch, Matthias C. and Steubl, Dominik and Matschkal, Julia and Kemmner, Stephan and Hausinger, Renate and Block, Zenonas and Haller, Bernhard and Heemann, Uwe and Kotliar, Konstantin and Grimmer, Timo and Schmaderer, Christoph},
  title     = {Cognitive impairment and microvascular function in end-stage renal disease},
  series = {International Journal of Methods in Psychiatric Research (MPR)},
  volume    = {31},
  journal   = {International Journal of Methods in Psychiatric Research (MPR)},
  number    = {2},
  publisher = {Wiley},
  issn      = {1049-8931 (Print)},
  doi       = {10.1002/mpr.1909},
  pages     = {1 -- 10},
  year      = {2022},
  abstract  = {Objective Hemodialysis patients show an approximately threefold higher prevalence of cognitive impairment compared to the age-matched general population. Impaired microcirculatory function is one of the assumed causes. Dynamic retinal vessel analysis is a quantitative method for measuring neurovascular coupling and microvascular endothelial function. We hypothesize that cognitive impairment is associated with altered microcirculation of retinal vessels. Methods 152 chronic hemodialysis patients underwent cognitive testing using the Montreal Cognitive Assessment. Retinal microcirculation was assessed by Dynamic Retinal Vessel Analysis, which carries out an examination recording retinal vessels' reaction to a flicker light stimulus under standardized conditions. Results In unadjusted as well as in adjusted linear regression analyses a significant association between the visuospatial executive function domain score of the Montreal Cognitive Assessment and the maximum arteriolar dilation as response of retinal arterioles to the flicker light stimulation was obtained. Conclusion This is the first study determining retinal microvascular function as surrogate for cerebral microvascular function and cognition in hemodialysis patients. The relationship between impairment in executive function and reduced arteriolar reaction to flicker light stimulation supports the involvement of cerebral small vessel disease as contributing factor for the development of cognitive impairment in this patient population and might be a target for noninvasive disease monitoring and therapeutic intervention.},
  language  = {en}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {26},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1978},
  language  = {de}
}
@article{Anik1978,
  author    = {Anik, Sabri},
  title     = {Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abh{\"a}ngigkeit von einigen Spritzparametern},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {70},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {39},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {37 -- 41},
  year      = {1978},
  language  = {de}
}
@article{AnikAnik1991,
  author    = {Anik, Sabri and Anik, Salahaddin},
  title     = {Stand der Schweißtechnik in der T{\"u}rkei},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {3},
  issn      = {0036-7184},
  pages     = {142 -- 145},
  year      = {1991},
  language  = {de}
}
@article{AnikDagsoez1971,
  author    = {Anik, Sabri and Dagsoez, A. K.},
  title     = {Feinbleche schweißen : die Temperaturverteilung in d{\"u}nnen Stahlblechplatten beim Lichtbogenschweißen},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {63},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {9},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {57 -- 59},
  year      = {1971},
  language  = {de}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {88},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {8},
  issn      = {0940-483X},
  pages     = {707 -- 710},
  year      = {1984},
  language  = {en}
}
@article{AnikFrohberg1987,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {91},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {7},
  issn      = {0940-483X},
  pages     = {790 -- 794},
  year      = {1987},
  language  = {en}
}
@article{AnikFrohberg1984,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {75},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {586 -- 589},
  year      = {1984},
  language  = {en}
}
@article{AnikFrohberg1983,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {8},
  issn      = {0044-3093},
  pages     = {530 -- 534},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohberg1988,
  author    = {Anik, Sabri and Frohberg, Martin G.},
  title     = {Thermodynamics of oxygen in the copper-antimony system at 1473K},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {41},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {10},
  issn      = {0044-2658},
  pages     = {498 -- 501},
  year      = {1988},
  language  = {en}
}
@article{AnikFrohbergKapoor1982,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C},
  series = {Zeitschrift f{\"u}r Physikalische Chemie},
  volume    = {133},
  journal   = {Zeitschrift f{\"u}r Physikalische Chemie},
  number    = {2},
  issn      = {0942-9352},
  pages     = {167 -- 174},
  year      = {1982},
  language  = {de}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Experiments and theoretical considerations on the solution of oxygen in binary metal alloys},
  series = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  volume    = {87},
  journal   = {Berichte der Bunsengesellschaft f{\"u}r physikalische Chemie},
  number    = {12},
  issn      = {0005-9021},
  pages     = {1201 -- 1204},
  year      = {1983},
  language  = {en}
}
@article{AnikFrohbergKapoor1983,
  author    = {Anik, Sabri and Frohberg, Martin G. and Kapoor, Madan Lal},
  title     = {Prediction of thermodynamic properties of oxygen in binary metallic solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {6},
  issn      = {0044-3093},
  pages     = {372 -- 375},
  year      = {1983},
  language  = {en}
}
@article{AnikKapoorFrohberg1983,
  author    = {Anik, Sabri and Kapoor, Madan Lal and Frohberg, Martin G.},
  title     = {Thermodynamic behaviour of oxygen in molten substitutional alloy solvents},
  series = {Zeitschrift f{\"u}r Metallkunde},
  volume    = {74},
  journal   = {Zeitschrift f{\"u}r Metallkunde},
  number    = {1},
  issn      = {0044-3093},
  pages     = {53 -- 58},
  year      = {1983},
  language  = {en}
}
@article{AnikTopuzTuncel1992,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {44},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {2},
  issn      = {0036},
  pages     = {97 -- 100},
  year      = {1992},
  language  = {de}
}
@article{AnikTopuzTuncel1991,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X 210 Cr 12 und 25 MoCr 4 auf ihre mechanischen Eigenschaften},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {6},
  issn      = {0036-7184},
  pages     = {341 -- 344},
  year      = {1991},
  language  = {de}
}
@article{AnikTuelbentci1973,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke beim Lichtbogenschweißen ; Teil 1},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {65},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {48},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {13 -- 15},
  year      = {1973},
  language  = {de}
}
@article{AnikTuelbentci1973,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 2},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {65},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {52},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {9 -- 13},
  year      = {1973},
  language  = {de}
}
@article{AnikTuelbentci1974,
  author    = {Anik, Sabri and Tuelbentci, K.},
  title     = {Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 3},
  series = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  volume    = {66},
  journal   = {Technische Rundschau : TR ; das Schweizer Industrie-Magazin},
  number    = {2},
  publisher = {Medtrix Group},
  address   = {Basel},
  issn      = {0040-148X},
  pages     = {43 -- 47},
  year      = {1974},
  language  = {de}
}
@article{ArampatzisKaramanidisAlbracht2007,
  author    = {Arampatzis, Adamantios and Karamanidis, Kiros and Albracht, Kirsten},
  title     = {Adaptational responses of the human Achilles tendon by modulation of the applied cyclic strain magnitude},
  series = {Journal of Experimental Biology},
  volume    = {210},
  journal   = {Journal of Experimental Biology},
  number    = {15},
  issn      = {0022-0949},
  doi       = {10.1242/jeb.003814},
  pages     = {2743 -- 2753},
  year      = {2007},
  language  = {en}
}
@article{ArampatzisKaramanidisMademlietal.2009,
  author    = {Arampatzis, Adamantios and Karamanidis, Kiros and Mademli, Lida and Albracht, Kirsten},
  title     = {Plasticity of the human tendon to short and long-term mechanical loading},
  series = {Exercise and Sport Sciences Reviews},
  volume    = {37},
  journal   = {Exercise and Sport Sciences Reviews},
  number    = {2},
  issn      = {1538-3008},
  doi       = {10.1097/JES.0b013e31819c2e1d},
  pages     = {66 -- 72},
  year      = {2009},
  language  = {en}
}
@article{ArampatzisPeperBierbaumetal.2010,
  author    = {Arampatzis, Adamantios and Peper, Andreas and Bierbaum, Stefanie and Albracht, Kirsten},
  title     = {Plasticity of human Achilles tendon mechanical and morphological properties in response to cyclic strain},
  series = {Journal of Biomechanics},
  volume    = {43},
  journal   = {Journal of Biomechanics},
  number    = {16},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2010.08.014},
  pages     = {3073 -- 3079},
  year      = {2010},
  abstract  = {The purpose of the current study in combination with our previous published data (Arampatzis et al., 2007) was to examine the effects of a controlled modulation of strain magnitude and strain frequency applied to the Achilles tendon on the plasticity of tendon mechanical and morphological properties. Eleven male adults (23.9±2.2 yr) participated in the study. The participants exercised one leg at low magnitude tendon strain (2.97±0.47\%), and the other leg at high tendon strain magnitude (4.72±1.08\%) of similar frequency (0.5 Hz, 1 s loading, 1 s relaxation) and exercise volume (integral of the plantar flexion moment over time) for 14 weeks, 4 days per week, 5 sets per session. The exercise volume was similar to the intervention of our earlier study (0.17 Hz frequency; 3 s loading, 3 s relaxation) allowing a direct comparison of the results. Before and after the intervention ankle joint moment has been measured by a dynamometer, tendon-aponeurosis elongation by ultrasound and cross-sectional area of the Achilles tendon by magnet resonance images (MRI). We found a decrease in strain at a given tendon force, an increase in tendon-aponeurosis stiffness and tendon elastic modulus of the Achilles tendon only in the leg exercised at high strain magnitude. The cross-sectional area (CSA) of the Achilles tendon did not show any statistically significant (P>0.05) differences to the pre-exercise values in both legs. The results indicate a superior improvement in tendon properties (stiffness, elastic modulus and CSA) at the low frequency (0.17 Hz) compared to the high strain frequency (0.5 Hz) protocol. These findings provide evidence that the strain magnitude applied to the Achilles tendon should exceed the value, which occurs during habitual activities to trigger adaptational effects and that higher tendon strain duration per contraction leads to superior tendon adaptational responses.},
  language  = {en}
}
@article{AridaAlhaddadSchoening2011,
  author    = {Arida, Hassan A. and Al-haddad, Ameera and Sch{\"o}ning, Michael Josef},
  title     = {New Solid-State Organic Membrane Based Lead-Selective Micro-Electrode},
  series = {International Journal of Electrochemical Science. 6 (2011), H. 9},
  journal   = {International Journal of Electrochemical Science. 6 (2011), H. 9},
  isbn      = {1452-3981},
  pages     = {3858 -- 3867},
  year      = {2011},
  language  = {en}
}
@article{AridaMohsenSchoening2009,
  author    = {Arida, Hassan and Mohsen, Q. and Sch{\"o}ning, Michael Josef},
  title     = {Microfabrication, characterization and analytical application of a new thin-film silver microsensor},
  series = {Electrochimica Acta. 54 (2009), H. 13},
  journal   = {Electrochimica Acta. 54 (2009), H. 13},
  isbn      = {0013-4686},
  pages     = {3543 -- 3547},
  year      = {2009},
  language  = {en}
}
@article{AridaTurekRolkaetal.2009,
  author    = {Arida, Hassan and Turek, Monika and Rolka, David and Sch{\"o}ning, Michael Josef},
  title     = {A Novel Thin-Film Copper Array Based on an Organic/Inorganic Sensor Hybrid: Microfabrication, Potentiometric Characterization, and Flow-Injection Analysis Application},
  series = {Electroanalysis. 21 (2009), H. 10},
  journal   = {Electroanalysis. 21 (2009), H. 10},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1040-0397},
  pages     = {1145 -- 1151},
  year      = {2009},
  language  = {en}
}
@article{ArinkinDigelPorstetal.2014,
  author    = {Arinkin, Vladimir and Digel, Ilya and Porst, Dariusz and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard},
  title     = {Phenotyping date palm varieties via leaflet cross-sectional imaging and artificial neural network application},
  series = {BMC bioinformatics},
  volume    = {15},
  journal   = {BMC bioinformatics},
  number    = {55},
  issn      = {1471-2105},
  doi       = {10.1186/1471-2105-15-55},
  pages     = {1 -- 8},
  year      = {2014},
  abstract  = {Background True date palms (Phoenix dactylifera L.) are impressive trees and have served as an indispensable source of food for mankind in tropical and subtropical countries for centuries. The aim of this study is to differentiate date palm tree varieties by analysing leaflet cross sections with technical/optical methods and artificial neural networks (ANN). Results Fluorescence microscopy images of leaflet cross sections have been taken from a set of five date palm tree cultivars (Hewlat al Jouf, Khlas, Nabot Soltan, Shishi, Um Raheem). After features extraction from images, the obtained data have been fed in a multilayer perceptron ANN with backpropagation learning algorithm. Conclusions Overall, an accurate result in prediction and differentiation of date palm tree cultivars was achieved with average prediction in tenfold cross-validation is 89.1\% and reached 100\% in one of the best ANN.},
  language  = {en}
}
@article{ArpshofenGerlingSommeretal.1981,
  author    = {Arpshofen, Ingo and Gerling, Ulrich and Sommer, Ferdinand and Schultheiss, Emil and Predel, Bruno and Pool, M. J.},
  title     = {Experimentelle Bestimmung der integralen Mischungsenthalpien in den bin{\"a}ren Systemen Pd-Cu und Si-Cu bei 1600 K},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 12},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {842 -- 846},
  year      = {1981},
  language  = {de}
}
@article{ArpshofenGerlingSommeretal.1981,
  author    = {Arpshofen, Ingo and Gerling, Ulrich and Sommer, Ferdinand and Schultheiss, Emil and Predel, Bruno and Pool, M. J.},
  title     = {Bestimmung der Mischungsenthalpien im System Palladium-Silicium bei 1600 K},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 11},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 72, H. 11},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {776 -- 781},
  year      = {1981},
  language  = {de}
}
@article{ArpshofenPoolSommeretal.1983,
  author    = {Arpshofen, Ingo and Pool, M. J. and Sommer, Ferdinand and Gerling, Ulrich and Predel, Bruno and Schultheiss, Emil},
  title     = {Determination of the integral mixing enthalpies in the Cu-Pd-Si liquid ternary alloy system at 1600 K},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 1},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 1},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {25 -- 32},
  year      = {1983},
  language  = {en}
}
@article{ArreolaKeusgenSchoening2017,
  author    = {Arreola, Julio and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Effect of O2 plasma on properties of electrolyte-insulator-semiconductor structures},
  series = {physica status solidi a : applications and materials sciences},
  volume    = {214},
  journal   = {physica status solidi a : applications and materials sciences},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201700025},
  pages     = {Artikel 1700025},
  year      = {2017},
  abstract  = {Prior to immobilization of biomolecules or cells onto biosensor surfaces, the surface must be physically or chemically activated for further functionalization. Organosilanes are a versatile option as they facilitate the immobilization through their terminal groups and also display self-assembly. Incorporating hydroxyl groups is one of the important methods for primary immobilization. This can be done, for example, with oxygen plasma treatment. However, this treatment can affect the performance of the biosensors and this effect is not quite well understood for surface functionalization. In this work, the effect of O2 plasma treatment on EIS sensors was investigated by means of electrochemical characterizations: capacitance-voltage (C-V) and constant capacitance (ConCap) measurements. After O2 plasma treatment, the potential of the EIS sensor dramatically shifts to a more negative value. This was successfully reset by using an annealing process.},
  language  = {en}
}
@article{ArreolaKeusgenSchoening2019,
  author    = {Arreola, Julio and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Toward an immobilization method for spore-based biosensors in oxidative environment},
  series = {Electrochimica Acta},
  volume    = {302},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.electacta.2019.01.148},
  pages     = {394 -- 401},
  year      = {2019},
  language  = {en}
}
@article{ArreolaKeusgenWagneretal.2019,
  author    = {Arreola, Julio and Keusgen, Michael and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines},
  series = {Biosensors and Bioelectronics},
  volume    = {143},
  journal   = {Biosensors and Bioelectronics},
  number    = {111628},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.111628},
  year      = {2019},
  language  = {en}
}
@article{ArreolaMaetzkowDuranetal.2016,
  author    = {Arreola, Julio and M{\"a}tzkow, Malte and Dur{\´a}n, Marlena Palomar and Greeff, Anton and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Optimization of the immobilization of bacterial spores on glass substrates with organosilanes},
  series = {Physica status solidi (A) : Applications and materials science},
  volume    = {213},
  journal   = {Physica status solidi (A) : Applications and materials science},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201532914},
  pages     = {1463 -- 1470},
  year      = {2016},
  abstract  = {Spores can be immobilized on biosensors to function as sensitive recognition elements. However, the immobilization can affect the sensitivity and reproducibility of the sensor signal. In this work, three different immobilization strategies with organosilanes were optimized and characterized to immobilize Bacillus atrophaeus spores on glass substrates. Five different silanization parameters were investigated: nature of the solvent, concentration of the silane, silanization time, curing process, and silanization temperature. The resulting silane layers were resistant to a buffer solution (e.g., Ringer solution) with a polysorbate (e.g., Tween®80) and sonication.},
  language  = {en}
}
@article{ArreolaOberlaenderMaetzkowetal.2017,
  author    = {Arreola, Julio and Oberl{\"a}nder, Jan and M{\"a}tzkow, M. and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Surface functionalization for spore-based biosensors with organosilanes},
  series = {Electrochimica Acta},
  volume    = {241},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2017.04.157},
  pages     = {237 -- 243},
  year      = {2017},
  abstract  = {In the present work, surface functionalization of different sensor materials was studied. Organosilanes are well known to serve as coupling agent for biomolecules or cells on inorganic materials. 3-aminopropyltriethoxysilane (APTES) was used to attach microbiological spores time to an interdigitated sensor surface. The functionality and physical properties of APTES were studied on isolated sensor materials, namely silicon dioxide (SiO2) and platinum (Pt) as well as the combined material on sensor level. A predominant immobilization of spores could be demonstrated on SiO2 surfaces. Additionally, the impedance signal of APTES-functionalized biosensor chips has been investigated.},
  language  = {en}
}
@article{Artmann1986,
  author    = {Artmann, Gerhard},
  title     = {A microscopic photometric method for measuring erythrocyte deformability. Artmann, Gerhard Michael},
  series = {Clinical Hemorheology. 6 (1986)},
  journal   = {Clinical Hemorheology. 6 (1986)},
  isbn      = {0271-5198},
  pages     = {617 -- 627},
  year      = {1986},
  language  = {en}
}
@article{Artmann1996,
  author    = {Artmann, Gerhard},
  title     = {2nd International Conference on Medical Biorheology (ICMB). Shanghai, China, September 13-15, 1995. Shi, Young de, Artmann, Gerhard Michael, Meiselman, Herbert J.},
  series = {Biorheology. 33 (1996), H. 6},
  journal   = {Biorheology. 33 (1996), H. 6},
  isbn      = {0006-355x},
  pages     = {505 -- 507},
  year      = {1996},
  language  = {en}
}
@article{Artmann1995,
  author    = {Artmann, Gerhard},
  title     = {Microscopic photometric quantification of stiffness and relaxation time of red blood cells in a flow chamber. Artmann, Gerhard Michael},
  series = {Biorheology. 32 (1995), H. 5},
  journal   = {Biorheology. 32 (1995), H. 5},
  isbn      = {0006-355x},
  pages     = {553 -- 570},
  year      = {1995},
  language  = {en}
}