@inproceedings{HorikawaAshikagaYamaguchietal.2022,
  author    = {Horikawa, Atsushi and Ashikaga, Mitsugu and Yamaguchi, Masato and Ogino, Tomoyuki and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combined heat and power supply demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine},
  series = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  booktitle = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  publisher = {American Society of Mechanical Engineers},
  address   = {Fairfield},
  isbn      = {978-0-7918-8599-4},
  doi       = {10.1115/GT2022-81620},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {Kawasaki Heavy Industries, Ltd. (KHI), Aachen University of Applied Sciences, and B\&B-AGEMA GmbH have investigated the potential of low NOx micro-mix (MMX) hydrogen combustion and its application to an industrial gas turbine combustor. Engine demonstration tests of a MMX combustor for the M1A-17 gas turbine with a co-generation system were conducted in the hydrogen-fueled power generation plant in Kobe City, Japan. This paper presents the results of the commissioning test and the combined heat and power (CHP) supply demonstration. In the commissioning test, grid interconnection, loading tests and load cut-off tests were successfully conducted. All measurement results satisfied the Japanese environmental regulation values. Dust and soot as well as SOx were not detected. The NOx emissions were below 84 ppmv at 15 \% O2. The noise level at the site boundary was below 60 dB. The vibration at the site boundary was below 45 dB. During the combined heat and power supply demonstration, heat and power were supplied to neighboring public facilities with the MMX combustion technology and 100 \% hydrogen fuel. The electric power output reached 1800 kW at which the NOx emissions were 72 ppmv at 15 \% O2, and 60 \%RH. Combustion instabilities were not observed. The gas turbine efficiency was improved by about 1 \% compared to a non-premixed type combustor with water injection as NOx reduction method. During a total equivalent operation time of 1040 hours, all combustor parts, the M1A-17 gas turbine as such, and the co-generation system were without any issues.},
  language  = {en}
}
@inproceedings{Butenweg2022,
  author    = {Butenweg, Christoph},
  title     = {Seismic design and evaluation of industrial facilities},
  series = {The Third European Conference on Earthquake Engineering and Seismology},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology},
  editor    = {Vacareanu, Radu and Ionescu, Constantin},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-15103-3},
  issn      = {2524-342X},
  doi       = {10.1007/978-3-031-15104-0},
  pages     = {449 -- 464},
  year      = {2022},
  abstract  = {Industrial facilities must be thoroughly designed to withstand seismic actions as they exhibit an increased loss potential due to the possibly wideranging damage consequences and the valuable process engineering equipment. Past earthquakes showed the social and political consequences of seismic damage to industrial facilities and sensitized the population and politicians worldwide for the possible hazard emanating from industrial facilities. However, a holistic approach for the seismic design of industrial facilities can presently neither be found in national nor in international standards. The introduction of EN 1998-4 of the new generation of Eurocode 8 will improve the normative situation with specific seismic design rules for silos, tanks and pipelines and secondary process components. The article presents essential aspects of the seismic design of industrial facilities based on the new generation of Eurocode 8 using the example of tank structures and secondary process components. The interaction effects of the process components with the primary structure are illustrated by means of the experimental results of a shaking table test of a three story moment resisting steel frame with different process components. Finally, an integrated approach of digital plant models based on building information modelling (BIM) and structural health monitoring (SHM) is presented, which provides not only a reliable decision-making basis for operation, maintenance and repair but also an excellent tool for rapid assessment of seismic damage.},
  language  = {en}
}
@inproceedings{KubalskiButenwegMarinkovićetal.2017,
  author    = {Kubalski, T. and Butenweg, Christoph and Marinković, Marko and Klinkel, S.},
  title     = {Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.},
  language  = {en}
}
@inproceedings{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Behaviour factor q for the seismic design of URM buildings},
  series = {The Third European Conference on Earthquake Engineering and Seismology},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology},
  editor    = {Arion, Christian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {1184 -- 1194},
  year      = {2022},
  abstract  = {Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.},
  language  = {en}
}
@inproceedings{GrunendahldeRochefortButenweg2005,
  author    = {Grunendahl, A. and de Rochefort, E. and Butenweg, Christoph},
  title     = {Numerical models for investigating the causes of low back pain due to whole-body vibrations},
  series = {2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.},
  booktitle = {2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.},
  publisher = {IST Press},
  address   = {Lisbon},
  organization    = {International Conference on Computational Bioengineering <2, 2005, Lissabon>},
  isbn      = {978-972-8469-37-3},
  pages     = {905 -- 914},
  year      = {2005},
  language  = {en}
}
@inproceedings{EdipGarevskiButenwegetal.2014,
  author    = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sheshov, Vlatko and Bojadjieva, Julijana and Gjorgjiev, Igor},
  title     = {New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media},
  series = {2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2},
  booktitle = {2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2},
  publisher = {Curran Associates, Inc.},
  address   = {Red Hook, NY},
  organization    = {European Conference on Earthquake Engineering and Seismology <2, 2014, Istanbul>},
  isbn      = {978-1-5108-1021-1},
  pages     = {1556 -- 1561},
  year      = {2014},
  language  = {en}
}
@inproceedings{DalguerChurilovButenwegetal.2014,
  author    = {Dalguer, Luis A. and Churilov, Sergey and Butenweg, Christoph and Renault, Philippe and Hyun, An Jun},
  title     = {Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS},
  series = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  booktitle = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  organization    = {Workshop SMART2013 <2014, Paris>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{AltayButenwegKlinkeletal.2014,
  author    = {Altay, Okyay and Butenweg, Christoph and Klinkel, Sven and Taddei, Francesca},
  title     = {Vibration mitigation of wind turbine towers by tuned liquid column dampers},
  series = {Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)},
  booktitle = {Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)},
  address   = {Porto},
  organization    = {European Conference on Structural Dynamics, EURODYN <9, 2014, Porto>},
  isbn      = {978-972-752-165-4},
  pages     = {1531 -- 1538},
  year      = {2014},
  language  = {en}
}
@inproceedings{AltayKlinkelButenweg2014,
  author    = {Altay, Okyay and Klinkel, Sven and Butenweg, Christoph},
  title     = {Intelligente semiaktive D{\"a}mpfungssysteme zur Reduktion periodischer und stochastischer Bauwerksschwingungen},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...},
  publisher = {Lehrstuhl f{\"u}r Statik, Techn. Univ. M{\"u}nchen},
  address   = {M{\"u}nchen},
  organization    = {Fachtagung Baustatik - Baupraxis <12, 2014, M{\"u}nchen>},
  isbn      = {978-3-00-041256-1},
  pages     = {397 -- 404},
  year      = {2014},
  language  = {de}
}
@inproceedings{RosinButenweg2014,
  author    = {Rosin, Julia and Butenweg, Christoph},
  title     = {Berechnungsansatz f{\"u}r basisisolierte Tankbauwerke},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...},
  publisher = {Lehrstuhl f{\"u}r Statik, Techn. Univ. M{\"u}nchen},
  address   = {M{\"u}nchen},
  organization    = {Fachtagung Baustatik - Baupraxis <12, 2014, M{\"u}nchen>},
  isbn      = {978-3-00-041256-1},
  pages     = {103 -- 112},
  year      = {2014},
  language  = {de}
}
@inproceedings{EdipGarevskiButenwegetal.2014,
  author    = {Edip, Kemal and Garevski, Mihail and Butenweg, Christoph and Sesov, Vlatko and Bojadjieva, Julijana and Gjorgjiev, Igor},
  title     = {Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon},
  series = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed},
  booktitle = {Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  organization    = {International Conference on Seismic Design of Industrial Facilities <2013, Aachen>},
  isbn      = {978-3-658-02809-1 (Print) ; 978-3-658-02810-7},
  doi       = {10.1007/978-3-658-02810-7_47},
  pages     = {569 -- 576},
  year      = {2014},
  language  = {en}
}
@inproceedings{GiresiniButenwegAndreinietal.2014,
  author    = {Giresini, Linda and Butenweg, Christoph and Andreini, M. and De Falco, A. and Sassu, M.},
  title     = {Numerical calibration of a macro-element for vaultes system in historic churches},
  series = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  booktitle = {9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City},
  organization    = {International Conference on Structural Analyses of Historical Conctructions <9, 2014, Mexico City>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{RosinButenweg2014,
  author    = {Rosin, Julia and Butenweg, Christoph},
  title     = {Seismic isolation of cylindrical liquid storage tanks},
  series = {Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)},
  booktitle = {Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)},
  address   = {Porto},
  organization    = {European Conference on Structural Dynamics, EURODYN <9, 2014, Porto>},
  isbn      = {978-972-752-165-4},
  pages     = {3145 -- 3152},
  year      = {2014},
  language  = {en}
}
@inproceedings{RosinButenwegBoesenetal.2018,
  author    = {Rosin, Julia and Butenweg, Christoph and Boesen, Niklas and Gellert, Christoph},
  title     = {Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{Butenweg2012,
  author    = {Butenweg, Christoph},
  title     = {Eurocode 8 : Erdbebenauslegung von Tragwerken},
  series = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  booktitle = {Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmst{\"a}dter Massivbauseminar Zukunftsf{\"a}higes Planen und Bauen, 7. und 8. M{\"a}rz},
  publisher = {Freunde des Inst. f{\"u}r Massivbau der TU},
  address   = {Darmstadt},
  organization    = {Darmst{\"a}dter Massivbauseminar <36, 2012>},
  pages     = {257 -- 272},
  year      = {2012},
  language  = {de}
}
@inproceedings{GrundmannBauerBorchersetal.2018,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Borchers, Kai and Dumont, Etienne and Grimm, Christian D. and Ho, Tra-Mi and Jahnke, Rico and Lange, Caroline and Maiwald, Volker and Mikulz, Eugen and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Sasaki, Kaname and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Toth, Norbert and Wejmo, Elisabet and Biele, Jens and Krause, Christian and Cerotti, Matteo and Peloni, Alessandro and Dachwald, Bernd},
  title     = {Small Spacecraft Solar Sailing for Small Solar System Body Multiple Rendezvous and Landing},
  series = {2018 IEEE Aerospace Conference : 3-10 March 2018},
  booktitle = {2018 IEEE Aerospace Conference : 3-10 March 2018},
  isbn      = {978-1-5386-2014-4},
  pages     = {20 Seiten},
  year      = {2018},
  language  = {en}
}
@inproceedings{GellertButenweg2009,
  author    = {Gellert, Christoph and Butenweg, Christoph},
  title     = {Nichtlinearer Erdbebennachweis von Mauerwerksbauten},
  series = {Erdbeben und Mauerwerk : 11. D-A-CH-Tagung 2009 ; [10./11. September 2009 in Z{\"u}rich] / SGEB, Swiss Society for Earthquake Engineering and Structural Dynamics; Schweizerischer Ingenieur- und Architektenverein, Fachgruppe f{\"u}r Br{\"u}ckenbau und Hochbau. [Hrsg. Dazio, Alessandro ...]},
  booktitle = {Erdbeben und Mauerwerk : 11. D-A-CH-Tagung 2009 ; [10./11. September 2009 in Z{\"u}rich] / SGEB, Swiss Society for Earthquake Engineering and Structural Dynamics; Schweizerischer Ingenieur- und Architektenverein, Fachgruppe f{\"u}r Br{\"u}ckenbau und Hochbau. [Hrsg. Dazio, Alessandro ...]},
  publisher = {SIA},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <11, 2009, Z{\"u}rich>},
  isbn      = {978-3-03732-021-1},
  pages     = {125 -- 132},
  year      = {2009},
  language  = {de}
}
@inproceedings{ButenwegGellertMeskouris2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Meskouris, Konstantin},
  title     = {Ein neuer Ansatz zum Nachweis von Mauerwerksbauten},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. M{\"a}rz 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut f{\"u}r Baustatik, Universit{\"a}t Karlsruhe (TH)},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. M{\"a}rz 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut f{\"u}r Baustatik, Universit{\"a}t Karlsruhe (TH)},
  publisher = {Inst. f{\"u}r Baustatik, Univ. Karlsruhe (TH)},
  address   = {Karlsruhe},
  organization    = {Fachtagung Baustatik - Baupraxis <10, 2008, Karlsruhe>},
  isbn      = {978-3-935322-14-0},
  pages     = {103 -- 116},
  year      = {2008},
  language  = {de}
}
@inproceedings{ParkButenwegReindl2010,
  author    = {Park, Jin and Butenweg, Christoph and Reindl, Lukas},
  title     = {Untersuchung der Eignung von Ankerschienensystemen unter Erdbebeneinwirkungen},
  series = {Conference proceedings / ANSYS Conference \& 28th CADFEM Users´ Meeting 2010 : 3. - 5. November 2010, Eurogess Aachen / CADFEM; ANSYS},
  booktitle = {Conference proceedings / ANSYS Conference \& 28th CADFEM Users´ Meeting 2010 : 3. - 5. November 2010, Eurogess Aachen / CADFEM; ANSYS},
  publisher = {CADFEM [u.a.]},
  address   = {Grafing},
  isbn      = {3-937523-07-3},
  pages     = {Dokument 2.11.1},
  year      = {2010},
  language  = {de}
}
@inproceedings{KalkerNeumannButenwegetal.2005,
  author    = {Kalker, Ines and Neumann, M. and Butenweg, Christoph and Holler, Stefan},
  title     = {Modelling of textile strengthened masonry},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.184},
  pages     = {447 -- 448},
  year      = {2005},
  language  = {en}
}
@inproceedings{KarimiButenwegToll2005,
  author    = {Karimi, Iman and Butenweg, Christoph and Toll, Britta},
  title     = {Vulnerability assessment of industrial facilities},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.34},
  pages     = {34, 73 -- 75},
  year      = {2005},
  language  = {en}
}
@inproceedings{MistlerButenweg2005,
  author    = {Mistler, Michael and Butenweg, Christoph},
  title     = {A seismic design procedure for masonry buildings},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.193},
  pages     = {465 -- 467},
  year      = {2005},
  language  = {en}
}
@inproceedings{RenaultButenwegMistler2005,
  author    = {Renault, Philippe and Butenweg, Christoph and Mistler, Michael},
  title     = {Seismic vulnerability assessment system for bridges},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  pages     = {1 -- 14},
  year      = {2005},
  language  = {en}
}
@inproceedings{ButenwegThierauf1996,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Erfahrungen bei der Entwicklung eines objekt-orientierten FE-Programmes},
  series = {Forum Bauinformatik - Junge Wissenschaftler Forschen : Cottbus '96 / Olaf Horstmann ... (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; 135)},
  booktitle = {Forum Bauinformatik - Junge Wissenschaftler Forschen : Cottbus '96 / Olaf Horstmann ... (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; 135)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-313504-3},
  pages     = {60 -- 65},
  year      = {1996},
  language  = {de}
}
@inproceedings{ChudobaButenwegPfeiffer2003,
  author    = {Chudoba, Rostislav and Butenweg, Christoph and Pfeiffer, Frank},
  title     = {Textile reinforced concrete. Part I: Process model for collaborative research and development},
  series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke},
  publisher = {IKM},
  address   = {Weimar},
  organization    = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>},
  pages     = {1 -- 8},
  year      = {2003},
  language  = {en}
}
@inproceedings{ElDeibChudobaButenwegetal.2002,
  author    = {El-Deib, Khaled and Chudoba, Rostislav and Butenweg, Christoph and Meskouris, Konstantin and K{\"o}nke, Carsten and Bettzieche, Volker},
  title     = {Safety assessment of rockfill and masonry dams},
  series = {Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1},
  booktitle = {Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1},
  publisher = {Balkema},
  address   = {Lisse},
  organization    = {International Conference on Structural Dynamics <5, 2002, M{\"u}nchen>},
  isbn      = {90-5809-510-X},
  pages     = {237 -- 242},
  year      = {2002},
  language  = {en}
}
@inproceedings{HollerButenwegNohetal.2002,
  author    = {Holler, S. and Butenweg, Christoph and Noh, S.-Y. and Meskouris, Konstantin},
  title     = {Numerical simulation of textile-reinforced concrete structures},
  series = {Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)},
  booktitle = {Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <6, 2002, Prag>},
  isbn      = {0-948749-83-0},
  pages     = {287 -- 288},
  year      = {2002},
  language  = {en}
}
@inproceedings{LoschButenweg1999,
  author    = {Losch, S. and Butenweg, Christoph},
  title     = {Qualit{\"a}tsgesteuerte Bemessung von Stahlbetontragwerken mit der FE-Methode},
  series = {11. Forum Bauinformatik Darmstadt '99 : [Beitr{\"a}ge der Forumsteilnehmer, die im Rahmen des 11. Forums Bauinformatik vom 22. bis 24. September 1999 in Darmstadt ihre Forschung pr{\"a}sentiert ...] / Tobias Kuhn ... (Hrsg.) (Fortschritt-Berichte VDI : Reihe 4 Bauingenieurwesen ; Nr. 156)},
  booktitle = {11. Forum Bauinformatik Darmstadt '99 : [Beitr{\"a}ge der Forumsteilnehmer, die im Rahmen des 11. Forums Bauinformatik vom 22. bis 24. September 1999 in Darmstadt ihre Forschung pr{\"a}sentiert ...] / Tobias Kuhn ... (Hrsg.) (Fortschritt-Berichte VDI : Reihe 4 Bauingenieurwesen ; Nr. 156)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {Forum Bauinformatik <11, 1999, Darmstadt>},
  isbn      = {3-18-315604-0},
  pages     = {208 -- 215},
  year      = {1999},
  language  = {de}
}
@inproceedings{RosinHenneboehlButenweg2015,
  author    = {Rosin, J. and Henneb{\"o}hl, B. and Butenweg, Christoph},
  title     = {Globale Stabilit{\"a}tsanalysen zylindrischer, seismisch belasteter Tanks auf numerischer Grundlage},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {173 -- 180},
  year      = {2015},
  language  = {de}
}
@inproceedings{ChudobaKuhlmannButenweg2001,
  author    = {Chudoba, Rostislav and Kuhlmann, Wolfram and Butenweg, Christoph},
  title     = {Ein internetbasiertes technisches Informationssystem zur Koordination und Pr{\"a}sentation des Sonderforschungsbereichs 532},
  series = {Forum Bauinformatik 2001 - Junge Wissenschaftler Forschen / Richard Romberg .̤ (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; Nr. 169)},
  booktitle = {Forum Bauinformatik 2001 - Junge Wissenschaftler Forschen / Richard Romberg .̤ (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; Nr. 169)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {Forum Bauinformatik <2001>},
  isbn      = {3-18-316904-5},
  pages     = {94 -- 101},
  year      = {2001},
  language  = {de}
}
@inproceedings{MichelZilligenRosinetal.2015,
  author    = {Michel, P. and Zilligen, H. and Rosin, J. and Butenweg, Christoph},
  title     = {Seismisches Verhalten pfahlgegr{\"u}ndeter Tankbauwerke},
  series = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  booktitle = {Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Z{\"u}rich. (Dokumentation / SIA ; D 0255)},
  publisher = {SGEB},
  address   = {Z{\"u}rich},
  organization    = {D-A-C-H Tagung <14, 2015, Z{\"u}rich>},
  isbn      = {978-3-03732-060-0},
  pages     = {181 -- 188},
  year      = {2015},
  language  = {de}
}
@inproceedings{ButenwegThierauf1999,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Bemessung und Kostenoptimierung von Stahlbetontragwerken},
  series = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)},
  booktitle = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)},
  publisher = {Balkema},
  address   = {Rotterdam},
  organization    = {Fachtagung Baustatik, Baupraxis <7, 1999, Aachen>},
  isbn      = {90-5809-044-2},
  pages     = {213 -- 220},
  year      = {1999},
  language  = {de}
}
@inproceedings{ButenwegThierauf1997,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Optimum cost design of reinforced concrete structures using parallel computing},
  series = {Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping},
  booktitle = {Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping},
  publisher = {Saxe-Coburg Publication},
  address   = {Edinburgh},
  organization    = {Euro-Conference on Parallel and Distributed Computing for Computational Mechanics <1, 1997, Lochinver, Scotland>},
  isbn      = {0-948749-47-4},
  pages     = {197 -- 202},
  year      = {1997},
  language  = {en}
}
@inproceedings{ButenwegThierauf1998,
  author    = {Butenweg, Christoph and Thierauf, Georg},
  title     = {Optimum design of reinforced concrete structures},
  series = {Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping},
  booktitle = {Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Edinburgh},
  organization    = {International Conference on Computational Structures Technology <4, 1998, Edinburgh>},
  isbn      = {0-948749-57-1},
  pages     = {447 -- 458},
  year      = {1998},
  language  = {en}
}
@inproceedings{RochefortVerverGrunendahletal.2005,
  author    = {Rochefort, E. de and Verver, M. and Grunendahl, A. and Mooi, H. and Butenweg, Christoph},
  title     = {Detailed modelling of the lumbar spine for investigation of low back pain},
  series = {Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)},
  booktitle = {Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)},
  publisher = {SAE International},
  address   = {Warrendale, Pa.},
  organization    = {Society of Automotive Engineers},
  issn      = {0096-736X},
  doi       = {10.4271/2005-01-2716},
  pages     = {1 -- 11},
  year      = {2005},
  language  = {en}
}
@inproceedings{MeskourisButenweg2005,
  author    = {Meskouris, Konstantin and Butenweg, Christoph},
  title     = {Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik : D-A-CH-Tagung 2005 in K{\"o}ln / K. Meskouris, Chr. Butenweg (Hrsg.). Organisiert von der Deutschen Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik.},
  series = {DGEB-Publikation ; 13},
  booktitle = {DGEB-Publikation ; 13},
  publisher = {DGEB},
  address   = {Aachen},
  organization    = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik},
  isbn      = {3-930108-09-7},
  pages     = {V, 144 S.},
  year      = {2005},
  language  = {de}
}
@inproceedings{SchmittRosinButenweg2018,
  author    = {Schmitt, Timo and Rosin, Julia and Butenweg, Christoph},
  title     = {Seismic Impact And Design Of Buried Pipelines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  abstract  = {Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.},
  language  = {en}
}
@inproceedings{RajanButenwegDalgueretal.2017,
  author    = {Rajan, S. and Butenweg, Christoph and Dalguer, L. A. and An, J. H. and Renault, P. and Klinkel, S.},
  title     = {Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013},
  series = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  year      = {2017},
  language  = {en}
}
@inproceedings{ButenwegMarinkovicFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko and Fehling, Ekkehard and Pfetzing, Thomas and Kubalski, Thomas},
  title     = {Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{ButenwegHoltschoppen2014,
  author    = {Butenweg, Christoph and Holtschoppen, Britta},
  title     = {Seismic design of industrial facilities in Germany},
  series = {Seismic Design of Industrial Facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) : Aachen, 26. - 27.9.2013},
  booktitle = {Seismic Design of Industrial Facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) : Aachen, 26. - 27.9.2013},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02809-1 ; 3-658-02809-2 (Print) ; 978-3-658-02810-7 (E-Book)},
  doi       = {10.1007/978-3-658-02810-7_6},
  pages     = {63 -- 74},
  year      = {2014},
  language  = {de}
}
@inproceedings{MilkovaRosinButenwegetal.2018,
  author    = {Milkova, Kristina and Rosin, Julia and Butenweg, Christoph and Dumova-Jovanoska, Elena},
  title     = {Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 10},
  year      = {2018},
  language  = {en}
}
@inproceedings{MichelButenwegKlinkel2018,
  author    = {Michel, Philipp and Butenweg, Christoph and Klinkel, Sven},
  title     = {Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 13},
  year      = {2018},
  language  = {en}
}
@inproceedings{RosinMykoniouButenweg2017,
  author    = {Rosin, J. and Mykoniou, K. and Butenweg, Christoph},
  title     = {Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches},
  series = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  booktitle = {16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017},
  publisher = {Chilean Association on Seismology and Earthquake Engineering (ACHISINA)},
  pages     = {1 -- 14},
  year      = {2017},
  abstract  = {Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.},
  language  = {en}
}
@inproceedings{ButenwegMarinkovic2018,
  author    = {Butenweg, Christoph and Marinkovic, Marko},
  title     = {Damage reduction system for masonry infill walls under seismic loading},
  series = {ce/papers},
  volume    = {2},
  booktitle = {ce/papers},
  number    = {4},
  publisher = {Ernst \& Sohn Verlag},
  address   = {Berlin},
  doi       = {10.1002/cepa.863},
  pages     = {267 -- 273},
  year      = {2018},
  abstract  = {Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.},
  language  = {en}
}
@inproceedings{MistlerButenwegAnthoine2004,
  author    = {Mistler, M. and Butenweg, Christoph and Anthoine, A.},
  title     = {Evaluation of the failure criterion for masonry by homogenisation},
  series = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares},
  booktitle = {Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <7, 2004, Lissabon>},
  isbn      = {0-948749-95-4},
  doi       = {10.4203/ccp.79.201},
  pages     = {16 Seiten},
  year      = {2004},
  language  = {en}
}
@inproceedings{KubalskiMarinkovićButenweg2016,
  author    = {Kubalski, T. and Marinković, Marko and Butenweg, Christoph},
  title     = {Numerical investigation of masonry infilled R.C. frames},
  series = {Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016},
  booktitle = {Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016},
  editor    = {Modena, Claudio},
  publisher = {CRC Press},
  address   = {Leiden},
  isbn      = {9781315374963},
  pages     = {1219 -- 1226},
  year      = {2016},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2018,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Innovative System for Earthquake Resistant Masonry Infill Walls},
  series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018},
  pages     = {1 -- 12},
  year      = {2018},
  language  = {en}
}
@inproceedings{GierseKraemerDaabetal.2013,
  author    = {Gierse, Andreas and Kr{\"a}mer, Stefan and Daab, Dominique J. and Hessel, Joana and Baader, Fabian and M{\"u}ller, Brigitte S. and Wagner, Tobias and Gdalewitsch, Georg and Plescher, Engelbert and Pf{\"u}tzenreuter, Lysan},
  title     = {Experimental in-flight modal-analysis of a sounding rocket structure},
  series = {21st ESA Symposium on Rocket and Ballon related Research},
  booktitle = {21st ESA Symposium on Rocket and Ballon related Research},
  isbn      = {9789290922858},
  pages     = {341 -- 346},
  year      = {2013},
  language  = {en}
}
@inproceedings{GrundmannBauerBieleetal.2018,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Biele, Jens and Boden, Ralf and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian and Herč{\´i}k, David and Herique, Alain and Ho, Tra-Mi and Jahnke, Rico and Koch, Aaron and Kofman, Wlodek and Koncz, Alexander and Krause, Christian and Lange, Caroline and Lichtenheldt, Roy and Maiwald, Volker and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Pelivan, Ivanka and Peloni, Alessandro and Plettemeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Tardivel, Simon and Toth, Norbert and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Efficient massively parallel prospection for ISRU by multiple near-earth asteroid rendezvous using near-term solar sails and'now-term'small spacecraft solutions},
  series = {2nd Asteroid Science Intersections with In-Space Mine Engineering - ASIME 2018},
  booktitle = {2nd Asteroid Science Intersections with In-Space Mine Engineering - ASIME 2018},
  pages     = {1 -- 33},
  year      = {2018},
  abstract  = {Physical interaction with small solar system bodies (SSSB) is key for in-situ resource utilization (ISRU). The design of mining missions requires good understanding of SSSB properties, including composition, surface and interior structure, and thermal environment. But as the saying goes "If you've seen one asteroid, you've seen one Asteroid": Although some patterns may begin to appear, a stable and reliable scheme of SSSB classification still has to be evolved. Identified commonalities would enable generic ISRU technology and spacecraft design approaches with a high degree of re-use. Strategic approaches require much broader in-depth characterization of the SSSB populations of interest to the ISRU community. The DLR-ESTEC GOSSAMER Roadmap Science Working Groups identified target-flexible Multiple Near-Earth asteroid (NEA) Rendezvous (MNR) as one of the missions only feasible with solar sail propulsion, showed the ability to access any inclination and a wide range of heliocentric distances as well as continuous operation close to Earth's orbit where low delta-v objects reside.},
  language  = {en}
}
@inproceedings{SeboldtDachwald2003,
  author    = {Seboldt, Wolfgang and Dachwald, Bernd},
  title     = {Solar sails for near-term advanced scientific deep space missions},
  series = {Proceedings of the 8th International Workshop on Combustion and Propulsion},
  booktitle = {Proceedings of the 8th International Workshop on Combustion and Propulsion},
  pages     = {14 Seiten},
  year      = {2003},
  abstract  = {Solar sails are propelled in space by reflecting solar photons off large mirroring surfaces, thereby transforming the momentum of the photons into a propulsive force. This innovative concept for low-thrust space propulsion works without any propellant and thus provides a wide range of opportunities for highenergy low-cost missions. Offering an efficient way of propulsion, solar sailcraft could close a gap in transportation options for highly demanding exploration missions within our solar system and even beyond. On December 17th, 1999, a significant step was made towards the realization of this technology: a lightweight solar sail structure with an area of 20 m × 20 m was successfully deployed on ground in a large facility at the German Aerospace Center (DLR) at Cologne. The deployment from a package of 60 cm × 60 cm × 65 cm with a total mass of less than 35 kg was achieved using four extremely light-weight carbon fiber reinforced plastics (CFRP) booms with a specific mass of 100 g/m. The paper briefly reviews the basic principles of solar sails as well as the technical concept and its realization in the ground demonstration experiment, performed in close cooperation between DLR and ESA. Next possible steps are outlined. They could comprise the in-orbit demonstration of the sail deployment on the upper stage of a low-cost rocket and the verification of the propulsion concept by an autonomous and free flying solar sail in the frame of a scientific mission. It is expected that the present design could be extended to sail sizes of about (40 m)2 up to even (70 m)2 without significant mass penalty. With these areas, the maximum achievable thrust at 1 AU would range between 10 and 40 mN - comparable to some electric thrusters. Such prototype sails with a mass between 50 and 150 kg plus a micro-spacecraft of 50 to 250 kg would have a maximum acceleration in the order of 0.1 mm/s2 at 1 AU, corresponding to a maximum ∆V-capability of about 3 km/s per year. Two near/medium-term mission examples to a near-Earth asteroid (NEA) will be discussed: a rendezvous mission and a sample return mission.},
  language  = {en}
}
@inproceedings{KoenigWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.},
  title     = {Cybersecurity awareness training provided by the competence developing game GHOST},
  series = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-616-3},
  pages     = {81 -- 87},
  year      = {2018},
  abstract  = {This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game},
  language  = {en}
}
@inproceedings{HeinzOertelBung2010,
  author    = {Heinz, G. and Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Investigations on a cooling water system for a gas tubine facility concerning air vortexes and sediment transport},
  series = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  booktitle = {Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010},
  editor    = {Janssen, Robert},
  publisher = {School of Civil Engineering, The University of Queensland},
  address   = {Brisbane},
  organization    = {International Junior Researcher and Engineer Workshop on Hydraulic Structures <3, 2010, Edinburgh>},
  isbn      = {9781742720159},
  pages     = {109 -- 116},
  year      = {2010},
  language  = {en}
}
@inproceedings{ButenwegNorda2013,
  author    = {Butenweg, Christoph and Norda, Hannah},
  title     = {Nonlinear analysis of masonry structures according to Eurocode 8},
  series = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  booktitle = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)},
  editor    = {Adam, Christoph and Heuer, Rudolf and Lenhardt, Wolfgang and Schranz, Christian},
  isbn      = {978-3-902749-04-8},
  year      = {2013},
  language  = {en}
}
@inproceedings{ValeroBungErpicumetal.2017,
  author    = {Valero, Daniel and Bung, Daniel Bernhard and Erpicum, Sebastien and Dewals, Benjamin},
  title     = {Numerical study of turbulent oscillations around a cylinder: RANS capabilities and sensitivity analysis},
  series = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  booktitle = {Proceedings of the 37th IAHR World Congress August 13 - 18, 2017, Kuala Lumpur, Malaysia},
  issn      = {2521-716X},
  pages     = {3126 -- 3135},
  year      = {2017},
  language  = {en}
}
@inproceedings{DachwaldWurm2009,
  author    = {Dachwald, Bernd and Wurm, P.},
  title     = {Mission analysis for an advanced solar photon thruster},
  series = {60th International Astronautical Congress 2009, IAC 2009},
  volume    = {8},
  booktitle = {60th International Astronautical Congress 2009, IAC 2009},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-161567908-9},
  pages     = {6838 -- 6851},
  year      = {2009},
  abstract  = {The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), is a solar sail design concept, for which the two basic functions of the solar sail, namely light collection and thrust direction, are uncoupled. In this paper, we introduce a novel SPT concept, termed the Advanced Solar Photon Thruster (ASPT). This model does not suffer from the simplified assumptions that have been made for the analysis of compound solar sails in previous studies. We present the equations that describe the force, which acts on the ASPT. After a detailed design analysis, the performance of the ASPT with respect to the conventional flat solar sail (FSS) is investigated for three interplanetary mission scenarios: An Earth-Venus rendezvous, where the solar sail has to spiral towards the Sun, an Earth-Mars rendezvous, where the solar sail has to spiral away from the Sun, and an Earth-NEA rendezvous (to near-Earth asteroid 1996FG3), where a large orbital eccentricity change is required. The investigated solar sails have realistic near-term characteristic accelerations between 0.1 and 0.2mm/s2. Our results show that a SPT is not superior to the flat solar sail unless very idealistic assumptions are made.},
  language  = {en}
}
@inproceedings{ThomaFisherBraun2020,
  author    = {Thoma, Andreas and Fisher, Alex and Braun, Carsten},
  title     = {Improving the px4 avoid algorithm by bio-inspired flight strategies},
  series = {DLRK2020 - „Luft- und Raumfahrt - Verantwortung in allen Dimensionen"},
  booktitle = {DLRK2020 - „Luft- und Raumfahrt - Verantwortung in allen Dimensionen"},
  doi       = {10.25967/530183},
  pages     = {10 Seiten},
  year      = {2020},
  language  = {en}
}
@inproceedings{BeckerBergenerDelfmannetal.2011,
  author    = {Becker, J{\"o}rg and Bergener, Philipp and Delfmann, Patrick and Eggert, Mathias and Weiss, Burkhard},
  title     = {Supporting Business Process Compliance in Financial Institutions - A Model-Driven Approach},
  series = {Proceedings of the 10th International Conference on Wirtschaftsinformatik : 16 - 18 February 2011, Zurich, Switzerland},
  booktitle = {Proceedings of the 10th International Conference on Wirtschaftsinformatik : 16 - 18 February 2011, Zurich, Switzerland},
  pages     = {355 -- 364},
  year      = {2011},
  language  = {en}
}
@inproceedings{EggertKriska2022,
  author    = {Eggert, Mathias and Kriska, Melina},
  title     = {Gamification for software development processes - relevant affordances and design principles},
  series = {Proceedings of the 55th Hawaii International Conference on System Sciences},
  booktitle = {Proceedings of the 55th Hawaii International Conference on System Sciences},
  publisher = {HICSS Publishing},
  address   = {Honolulu},
  isbn      = {978-0-9981331-5-7},
  doi       = {10.24251/HICSS.2022.200},
  pages     = {1614 -- 1623},
  year      = {2022},
  abstract  = {A Gamified Information System (GIS) implements game concepts and elements, such as affordances and game design principles to motivate people. Based on the idea to develop a GIS to increase the motivation of software developers to perform software quality tasks, the research work at hand aims at investigating relevant requirements from that target group. Therefore, 14 interviews with software development experts are conducted and analyzed. According to the results, software developers prefer the affordances points, narrative storytelling in a multiplayer and a round-based setting. Furthermore, six design principles for the development of a GIS are derived.},
  language  = {en}
}
@inproceedings{KoenigWolf2016,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.},
  title     = {A new definition of competence developing games - and a framework to assess them},
  series = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-468-8},
  pages     = {95 -- 97},
  year      = {2016},
  abstract  = {There are different types of games that try to make use of the motivation of a gaming situation in learning contexts. This paper introduces the new terminology 'Competence Developing Game' (CDG) as an umbrella term for all games with this intention. Based on this new terminology, an assessment framework has been developed and validated in scope of an empirical study. Now, all different types of CDGs can be evaluated according to a defined and uniform set of assessment criteria and, thus, are comparable according to their characteristics and effectiveness.},
  language  = {en}
}
@inproceedings{KoenigVoelkerWolf2018,
  author    = {K{\"o}nig, Johannes Alexander and V{\"o}lker, Veronika and Wolf, Martin R.},
  title     = {The user-focused storybuilding framework for competence developing games - a design-framework considering the basics of an educational game's story},
  series = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-616-3},
  pages     = {98 -- 106},
  year      = {2018},
  abstract  = {During the development of a Competence Developing Game's (CDG) story it is indispensable to understand the target audience. Thereby, CDGs stories represent more than just the plot. The Story is about the Setting, the Characters and the Plot. As a toolkit to support the development of such a story, this paper introduces the UserFocused Storybuilding (short UFoS) Framework for CDGs. The Framework and its utilization will be explained, followed by a description of its development and derivation, including an empirical study. In addition, to simplify the Framework use regarding the CDG's target audience, a new concept of Nine Psychographic Player Types will be explained. This concept of Player Types provides an approach to handle the differences in between players during the UFoS Framework use. Thereby, this article presents a unique approach to the development of target group-differentiated CDGs stories.},
  language  = {en}
}
@inproceedings{EggertStanke2020,
  author    = {Eggert, Mathias and Stanke, Max-Alexander},
  title     = {Adoption of Integrated Voice Assistants in Health Care- Requirements and Design Guidelines},
  publisher = {GITO},
  address   = {Berlin},
  doi       = {10.30844/wi_2020_k2-eggert},
  pages     = {16 Seiten},
  year      = {2020},
  abstract  = {Integrated voice assistants (IVA) receive more and more attention and are widespread for entertainment use cases, such as radio hearing or web searches. At the same time, the health care segment suffers in process inefficiency and missing staff, whereas the usage of IVA has the potential to improve caring processes and patient satisfaction. By applying a design science approach and based on a qualitative study, we identify IVA requirements, barriers and design guidelines for the health care sector. The results reveal three important IVA functions: the ability to set appointments with care service staff, the documentation of health history and the communication with service staff. Integration, system stability and volume control are the most important nonfunctional requirements. Based on the interview results and project experiences, six design and implementation guidelines are derived.},
  language  = {en}
}
@inproceedings{WolfKoenig2017,
  author    = {Wolf, Martin R. and K{\"o}nig, Johannes Alexander},
  title     = {Competence Developing Games - Ein {\"U}berblick},
  series = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  booktitle = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  editor    = {Eibl, Maximilian and Gaedke, Martin},
  organization    = {Gesellschaft f{\"u}r Informatik},
  isbn      = {978-3-88579-669-5},
  doi       = {10.18420/in2017_32},
  pages     = {385 -- 391},
  year      = {2017},
  abstract  = {Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu {\"u}berf{\"u}hren. In diesem Artikel wird der {\"U}berbegriff „Competence Developing Games" definiert und anhand von Beispielen erl{\"a}utert. Daf{\"u}r werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erl{\"a}utert und eine Zuordnung durch-gef{\"u}hrt.},
  language  = {de}
}
@inproceedings{PeloniCeriottiDachwald2015,
  author    = {Peloni, Alessandro and Ceriotti, Matteo and Dachwald, Bernd},
  title     = {Solar-Sailing Trajectory Design for Close-up NEA Observations Mission},
  series = {4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy},
  booktitle = {4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy},
  pages     = {21 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{PeloniCeriottiDachwald2015,
  author    = {Peloni, A. and Ceriotti, M. and Dachwald, Bernd},
  title     = {Preliminary trajectory design of a multiple NEO rendezvous mission through solar sailing},
  series = {Proceedings of the International Astronautical Congress, IAC, Vol. 8, 2014},
  booktitle = {Proceedings of the International Astronautical Congress, IAC, Vol. 8, 2014},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-63439-986-9},
  pages     = {5352 -- 5366},
  year      = {2015},
  language  = {en}
}
@inproceedings{KapoorBraunBoller2010,
  author    = {Kapoor, Hrshi and Braun, Carsten and Boller, Christian},
  title     = {Modelling and optimisation of maintenance intervals to realize structural health monitoring applications on aircraft},
  series = {Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]},
  booktitle = {Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]},
  editor    = {Casciati, Fabio},
  publisher = {DEStech Publ.},
  address   = {Lancaster, Pa.},
  isbn      = {978-1-60595-024-2},
  pages     = {55 -- 63},
  year      = {2010},
  language  = {en}
}
@inproceedings{GrundmannBauerBieleetal.2018,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Biele, Jens and Boden, Ralf and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Herč{\´i}k, David and Ho, Tra-Mi and Jahnke, Rico and Koch, Aaron D and Koncz, Alexander and Krause, Christian and Lange, Caroline and Lichtenheldt, Roy and Maiwald, Volker and Mikschl, Tobias and Mikulz, Eugen and Montenegro, Sergio and Pelivan, Ivanka and Peloni, Alessandro and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Tardivel, Simon and T{\´o}th, Norbert and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Small spacecraft based multiple near-earth asteroid rendezvous and landing with near-term solar sails and 'Now-Term 'technologies},
  series = {69 th International Astronautical Congress (IAC)},
  booktitle = {69 th International Astronautical Congress (IAC)},
  pages     = {1 -- 18},
  year      = {2018},
  abstract  = {Physical interaction with small solar system bodies (SSSB) is the next step in planetary science, planetary in-situ resource utilization (ISRU), and planetary defense (PD). It requires a broader understanding of the surface properties of the target objects, with particular interest focused on those near Earth. Knowledge of composition, multi-scale surface structure, thermal response, and interior structure is required to design, validate and operate missions addressing these three fields. The current level of understanding is occasionally simplified into the phrase, "If you've seen one asteroid, you've seen one asteroid", meaning that the in-situ characterization of SSSBs has yet to cross the threshold towards a robust and stable scheme of classification. This would enable generic features in spacecraft design, particularly for ISRU and science missions. Currently, it is necessary to characterize any potential target object sufficiently by a dedicated pre-cursor mission to design the mission which then interacts with the object in a complex fashion. To open up strategic approaches, much broader in-depth characterization of potential target objects would be highly desirable. In SSSB science missions, MASCOT-like nano-landers and instrument carriers which integrate at the instrument level to their mothership have met interest. By its size, MASCOT is compatible with small interplanetary missions. The DLR-ESTEC Gossamer Roadmap Science Working Groups' studies identified Multiple Near-Earth asteroid (NEA) Rendezvous (MNR) as one of the space science missions only feasible with solar sail propulsion. The Solar Polar Orbiter (SPO) study showed the ability to access any inclination, theDisplaced-L1 (DL1) mission operates close to Earth, where objects of interest to PD and for ISRU reside. Other studies outline the unique capability of solar sails to provide access to all SSSB, at least within the orbit of Jupiter, and significant progress has been made to explore the performance envelope of near-term solar sails for MNR. However, it is difficult for sailcraft to interact physically with a SSSB. We expand and extend the philosophy of the recently qualified DLR Gossamer solar sail deployment technology using efficient multiple sub-spacecraft integration to also include landers for one-way in-situ investigations and sample-return missions by synergetic integration and operation of sail and lander. The MASCOT design concept and its characteristic features have created an ideal counterpart for thisand has already been adapted to the needs of the AIM spacecraft, former part of the NASA-ESA AIDA missionDesigning the 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018. IAC-18-F1.2.3 Page 2 of 17 combined spacecraft for piggy-back launch accommodation enables low-cost massively parallel access to the NEA population.},
  language  = {en}
}
@inproceedings{RosinKubalskiButenweg2013,
  author    = {Rosin, Julia and Kubalski, Thomas and Butenweg, Christoph},
  title     = {Seismic isolation of cylindrical liquid storage tanks},
  series = {Seismic design of industrial facilities},
  booktitle = {Seismic design of industrial facilities},
  editor    = {Klinkel, Sven and Butenweg, Christoph and Lin, Gao and Holtschoppen, Britta},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02810-7},
  doi       = {10.1007/978-3-658-02810-7_36},
  pages     = {429 -- 440},
  year      = {2013},
  abstract  = {Seismic excited liquid filled tanks are subjected to extreme loading due to hydrodynamic pressures, which can lead to nonlinear stability failure of the thinwalled cylindrical tanks, as it is known from past earthquakes. A significant reduction of the seismically induced loads can be obtained by the application of base isolation systems, which have to be designed carefully with respect to the modified hydrodynamic behaviour of the tank in interaction with the liquid. For this reason a highly sophisticated fluid-structure interaction model has to be applied for a realistic simulation of the overall dynamic system. In the following, such a model is presented and compared with the results of simplified mathematical models for rigidly supported tanks. Finally, it is examined to what extent a simple mechanical model can represent the behaviour of a base isolated tank in case of seismic excitation},
  language  = {en}
}
@inproceedings{KobGoemmelButenwegetal.2006,
  author    = {Kob, Malte and G{\"o}mmel, Andreas and Butenweg, Christoph and Niendorf, Thoralf},
  title     = {Training of a combined model of larynx and vocal folds with data from MRI measurements},
  series = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings},
  booktitle = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings},
  organization    = {International Conference on Voice Physiology and Biomechanics <5, 2006, Tokyo>},
  pages     = {45 -- 46},
  year      = {2006},
  language  = {en}
}
@inproceedings{RosinKubalskiButenweg2013,
  author    = {Rosin, Julia and Kubalski, Thomas and Butenweg, Christoph},
  title     = {Modellierung eines basisisolierten, zylindrischen Fl{\"u}ssigkeitstanks aus Stahl},
  series = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  booktitle = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  organization    = {D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik <13, 2013, Wien>},
  pages     = {1 -- 10},
  year      = {2013},
  language  = {de}
}
@inproceedings{Anthrakidis2010,
  author    = {Anthrakidis, Anette},
  title     = {Solare-Prozessw{\"a}rme-Standards (Sol-Pro-St)},
  series = {Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein},
  booktitle = {Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein},
  publisher = {OTTI},
  address   = {Regensburg},
  isbn      = {978-3-941785-29-8},
  pages     = {182 -- 187},
  year      = {2010},
  language  = {de}
}
@inproceedings{ButenwegKleemannAltay2013,
  author    = {Butenweg, Christoph and Kleemann, Anne and Altay, Okyay},
  title     = {Simulation von Impact Belastungen auf Stahlbetonstrukturen},
  series = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  booktitle = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  organization    = {D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik <13, 2013, Wien>},
  pages     = {1 -- 9},
  year      = {2013},
  language  = {de}
}
@inproceedings{WagnerNohButenwegetal.2002,
  author    = {Wagner, R. and Noh, S.-Y. and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Seismic excited granular material silos},
  series = {Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...},
  booktitle = {Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...},
  publisher = {Balkema},
  address   = {Lisse},
  organization    = {European Conference on Structural Dynamics, EURODYN <5, 2002, M{\"u}nchen>},
  isbn      = {90-5809-511-8},
  pages     = {253 -- 258},
  year      = {2002},
  language  = {en}
}
@inproceedings{MeskourisHoltschoppenButenwegetal.2011,
  author    = {Meskouris, Konstantin and Holtschoppen, Britta and Butenweg, Christoph and Rosin, Julia},
  title     = {Seismic analysis of liquid storage tanks},
  series = {Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Gr{\"u}tzner ; R. P{\´e}rez-Lopez ; T. Fern{\´a}ndez Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. V{\"o}tt. Volume 2},
  booktitle = {Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Gr{\"u}tzner ; R. P{\´e}rez-Lopez ; T. Fern{\´a}ndez Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. V{\"o}tt. Volume 2},
  publisher = {The Natural hazards Laboratory, National and Kapodistrian University of Athens},
  address   = {Athens},
  organization    = {International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering <2, 2011, Corinth>},
  isbn      = {978-960-466-093-3},
  pages     = {136 -- 139},
  year      = {2011},
  language  = {en}
}
@inproceedings{ButenwegPark2011,
  author    = {Butenweg, Christoph and Park, Jin},
  title     = {Verhalten von Ankerschienensystemen unter statisch zyklischen Beanspruchungen},
  series = {12. D-A-CH Tagung 2011 : Erdbeben und Baudynamik ; 15./16. September 2011, Hannover, Deutschland / Bundesanstalt f{\"u}r Geowissenschaften und Rohstoffe. C. K{\"o}nke (Hrsg.)},
  booktitle = {12. D-A-CH Tagung 2011 : Erdbeben und Baudynamik ; 15./16. September 2011, Hannover, Deutschland / Bundesanstalt f{\"u}r Geowissenschaften und Rohstoffe. C. K{\"o}nke (Hrsg.)},
  address   = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik},
  organization    = {D-A-C-H Tagung <12, 2011, Hannover>},
  isbn      = {3-930108-11-9},
  pages     = {349 -- 365},
  year      = {2011},
  language  = {de}
}
@inproceedings{ReindlButenwegKubalski2011,
  author    = {Reindl, Lukas and Butenweg, Christoph and Kubalski, Thomas},
  title     = {Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading},
  series = {COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...},
  booktitle = {COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...},
  publisher = {National Technical Univ. of Athens},
  address   = {Athen},
  organization    = {COMPDYN <2011, Corfu>},
  isbn      = {978-960-99994-0-3},
  pages     = {1 -- 10},
  year      = {2011},
  language  = {en}
}
@inproceedings{ParkElDaibButenwegetal.2011,
  author    = {Park, Jin and El-Daib, Khaled and Butenweg, Christoph and Gellert, Christoph},
  title     = {A novel macroelement approach for masonry walls},
  series = {Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)},
  booktitle = {Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)},
  publisher = {K. U. Leuven, Dep. of Civil Engineering},
  address   = {Leuven},
  organization    = {International Conference on Structural Dynamics, EURODYN <8, 2011, Leuven>},
  isbn      = {978-90-76019-31-4},
  pages     = {3281 -- 3286},
  year      = {2011},
  language  = {en}
}
@inproceedings{TaddeiReindlParketal.2011,
  author    = {Taddei, Francesca and Reindl, Lukas and Park, Jin and Butenweg, Christoph and Karadogan, Faruk},
  title     = {Numerical investigation of AAC wall panels based on the damage plasticity constitutive law},
  series = {Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011},
  booktitle = {Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011},
  publisher = {Stowarzyszenie Producent{\´o}w Cementu i Wapna},
  address   = {Krakow},
  organization    = {International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' <5, 2011, Bydgoszcz>},
  issn      = {1425-8129},
  pages     = {86 -- 91},
  year      = {2011},
  language  = {en}
}
@inproceedings{ReindlParkNordaetal.2010,
  author    = {Reindl, Lukas and Park, Jin and Norda, Hannah and Butenweg, Christoph},
  title     = {Seismic design of masonry walls subject to out-of-plane bending},
  series = {Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Kippen},
  organization    = {International Conference on Computational Structures Technology <10, 2010, Valencia>},
  isbn      = {978-1-905088-36-2},
  doi       = {10.4203/ccp.93.348},
  pages     = {Paper 348},
  year      = {2010},
  language  = {en}
}
@inproceedings{Butenweg2007,
  author    = {Butenweg, Christoph},
  title     = {Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung},
  series = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  booktitle = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  organization    = {D-A-CH Tagung <2007, Wien>},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {de}
}
@inproceedings{GoemmelKraemerButenwegetal.2005,
  author    = {G{\"o}mmel, Andreas and Kr{\"a}mer, Sebastian and Butenweg, Christoph and Kob, Malte},
  title     = {A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers},
  series = {Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: F{\"u}l{\"o}p Augusztinovicz ...},
  booktitle = {Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: F{\"u}l{\"o}p Augusztinovicz ...},
  publisher = {OPAKFI Tud. Egyes{\"u}let},
  address   = {Budapest},
  organization    = {Forum Acusticum <4, 2005, Budapest>},
  isbn      = {978-963-8241-68-9},
  pages     = {2759 -- 2764},
  year      = {2005},
  language  = {en}
}
@inproceedings{GoemmelButenwegKob2005,
  author    = {G{\"o}mmel, Andreas and Butenweg, Christoph and Kob, Malte},
  title     = {Towards a complete finite-element model of human phonation: modeling phonatory maneuvers},
  series = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  booktitle = {12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...},
  publisher = {Univ., Dep. of Orthodontics},
  address   = {Ulm},
  organization    = {Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields <12, 2005, Ulm>},
  isbn      = {978-3-9806183-8-0},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@inproceedings{ButenwegMistler2006,
  author    = {Butenweg, Christoph and Mistler, Michael},
  title     = {Seismic resistance of unreinforced masonry buildings},
  series = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Computational Structures Technology <8, 2006, Las Palmas>},
  isbn      = {1-905088-06-X},
  doi       = {10.4203/ccp.83.9},
  pages     = {Paper 9},
  year      = {2006},
  language  = {en}
}
@inproceedings{RenaultButenwegMeskouris2006,
  author    = {Renault, Philippe and Butenweg, Christoph and Meskouris, Konstantin},
  title     = {Baudynamische Untersuchung von Br{\"u}ckenbauwerken im K{\"o}lner Raum},
  series = {Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)},
  booktitle = {Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  organization    = {VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb},
  isbn      = {3-18-091941-8},
  pages     = {121 -- 140},
  year      = {2006},
  language  = {de}
}
@inproceedings{ButenwegGellertReindl2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Reindl, Lukas},
  title     = {Capacity design of masonry buildings under cyclic loading},
  series = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  booktitle = {Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Li{\`e}ge on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...},
  publisher = {Editions de l'Universit{\´e} de Li{\`e}ge},
  address   = {Li{\`e}ge},
  organization    = {Belgian Seismic Group},
  isbn      = {978-2-87456-063-7},
  pages     = {201 -- 208},
  year      = {2008},
  language  = {en}
}
@inproceedings{ButenwegGellert2008,
  author    = {Butenweg, Christoph and Gellert, Christoph},
  title     = {Displacement based design of masonry structures},
  series = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  booktitle = {Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...},
  publisher = {University of Newcastle},
  address   = {Callaghan},
  organization    = {International Brick and Block Masonry Conference <14, 2008, Sydney>},
  isbn      = {978-19-2070-1-92-5},
  pages     = {1 -- 10},
  year      = {2008},
  language  = {en}
}
@inproceedings{MeskourisMistlerButenweg2006,
  author    = {Meskouris, Konstantin and Mistler, Michael and Butenweg, Christoph},
  title     = {Mauerwerksbauten unter Erdbebenbelastung},
  series = {Numerische Methoden zur Probleml{\"o}sung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006},
  booktitle = {Numerische Methoden zur Probleml{\"o}sung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006},
  publisher = {IBAC},
  address   = {Aachen},
  organization    = {Aachener Baustofftag <34, 2006>},
  pages     = {Getr. Z{\"a}hlung},
  year      = {2006},
  language  = {de}
}
@inproceedings{KuhlmannButenwegLopezetal.2004,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Lopez, Marijen and Fernandez, Sebastian},
  title     = {Seismic vulnerability assessment of the historic Aachen Cathedral},
  series = {Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]},
  booktitle = {Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]},
  publisher = {CAEE},
  address   = {Vancouver},
  organization    = {World Conference on Earthquake Engineering <13, 2004, Vancouver>},
  pages     = {1 -- 14},
  year      = {2004},
  language  = {en}
}
@inproceedings{KuhlmannButenwegBettziecheetal.2004,
  author    = {Kuhlmann, Wolfram and Butenweg, Christoph and Bettzieche, Volker and Meskouris, Konstantin},
  title     = {Experimentelle und numerische Untersuchungen zur baudynamischen Beurteilung von Talsperren des Ruhrverbandes},
  series = {13. Deutsches Talsperrensymposium in Weimar},
  booktitle = {13. Deutsches Talsperrensymposium in Weimar},
  organization    = {Deutsches Talsperrensymposium <13, 2004, Weimar>},
  pages     = {1 -- 26},
  year      = {2004},
  language  = {de}
}
@inproceedings{ButenwegBettziecheKuhlmannetal.2005,
  author    = {Butenweg, Christoph and Bettzieche, Volker and Kuhlmann, Wolfram and Meskouris, Konstantin},
  title     = {Die baudynamische Beurteilung von Talsperren am Beispiel der F{\"u}rwiggetalsperre},
  series = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. M{\"a}rz 2005 in Dresden / Institut f{\"u}r Statik und Dynamik der Tragwerke, TU Dresden, Deutschland},
  publisher = {Inst. f{\"u}r Statik und Dynamik der Tragwerke},
  address   = {Dresden},
  organization    = {Fachtagung Baustatik - Baupraxis <8, 2005, Dresden>},
  isbn      = {3-00-015456-6},
  pages     = {73 -- 84},
  year      = {2005},
  language  = {de}
}
@inproceedings{MeskourisButenwegMistleretal.2004,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Mistler, Michael and Kuhlmann, Wolfram},
  title     = {Seismic behaviour of historic masonry buildings},
  series = {7th National Congress on Mechanics : Chania, Crete, June 24 - 26, 2004 ; proceedings / ed. A. Kounadis ....},
  booktitle = {7th National Congress on Mechanics : Chania, Crete, June 24 - 26, 2004 ; proceedings / ed. A. Kounadis ....},
  publisher = {Hellenic Society for Theoretical and Applied Mechanics},
  address   = {Chania},
  organization    = {National Congress on Mechanics <7, 2004, Chania, Crete>},
  pages     = {47 -- 49},
  year      = {2004},
  language  = {en}
}
@inproceedings{EggertWeber2023,
  author    = {Eggert, Mathias and Weber, Jannik},
  title     = {What drives the purchase decision in Instagram stores?},
  series = {ECIS 2023 Research Papers},
  booktitle = {ECIS 2023 Research Papers},
  pages     = {1 -- 17},
  year      = {2023},
  abstract  = {The popularity of social media and particularly Instagram grows steadily. People use the different platforms to share pictures as well as videos and to communicate with friends. The potential of social media platforms is also being used for marketing purposes and for selling products. While for Facebook and other online social media platforms the purchase decision factors are investigated several times, Instagram stores remain mainly unattended so far. The present research work closes this gap and sheds light into decisive factors for purchasing products offered in Instagram stores. A theoretical research model, which contains selected constructs that are assumed to have a significant influence on Instagram user´s purchase intention, is developed. The hypotheses are evaluated by applying structural equation modelling on survey data containing 127 relevant participants. The results of the study reveal that 'trust', 'personal recommendation', and 'usability' significantly influences user's buying intention in Instagram stores.},
  language  = {en}
}
@inproceedings{MarinkovicButenweg2020,
  author    = {Marinkovic, Marko and Butenweg, Christoph},
  title     = {Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays},
  series = {Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference},
  booktitle = {Brick and Block Masonry - From Historical to Sustainable Masonry. Proceedings of the 17th International Brick/Block Masonry Conference},
  publisher = {CRC Press},
  address   = {London},
  doi       = {10.1201/9781003098508-72},
  pages     = {1 -- 7},
  year      = {2020},
  abstract  = {Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the surrounding RC frame performed rather poor in past earthquakes. Masonry infills showed severe in-plane damages and failed in many cases under out-of-plane seismic loading. As the undesired interactions between frames and infills changes the load transfer on building level, complete collapses of buildings were observed. A possible solution is uncoupling of masonry infills to the frame to reduce the infill contribution activated by the frame deformation under horizontal loading. The paper presents numerical simulations on RC frames equipped with the innovative decoupling system INODIS. The system was developed within the European project INSYSME and allows an effective uncoupling of frame and infill. The simulations are carried out with a micro-modelling approach, which is able to predict the complex nonlinear behaviour resulting from the different materials and their interaction. Each brick is modelled individually and connected taking into account nonlinearity of a brick mortar interface. The calibration of the model is based on small specimen tests and experimental results for one bay one storey frame are used for the validation. The validated model is further used for parametric studies on two storey and two bay infilled frames. The response and change of the structural stiffness are analysed and compared to the traditionally infilled frame. The results confirm the effectiveness of the INODIS system with less damage and relatively low contribution of the infill at high drift levels. In contrast to the uncoupled system configurations, traditionally infilled frames experienced brittle failure at rather low drift levels.},
  language  = {en}
}
@inproceedings{MichelRosinButenwegetal.2020,
  author    = {Michel, Philipp and Rosin, Julia and Butenweg, Christoph and Klinkel, Sven},
  title     = {Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil},
  series = {Seismic design of industrial facilities 2020},
  booktitle = {Seismic design of industrial facilities 2020},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-729-0},
  pages     = {245 -- 254},
  year      = {2020},
  abstract  = {A further development of the Added-Mass-Method allows the combined representation of the effects of both soil-structure-interaction and fluid-structure interaction on a liquid-filled-tank in one model. This results in a practical method for describing the dynamic fluid pressure on the tank shell during joint movement. The fluid pressure is calculated on the basis of the tank's eigenform and the earthquake acceleration and represented by additional masses on the shell. The bearing on compliant ground is represented by replacement springs, which are calculated dependent on the local soil composition. The influence of the shear modulus of the compliant soil is clearly visible in the pressure curves and the stress distribution in the shell. The acceleration spectra are also dependent on soil stiffness. According to Eurocode-8 the acceleration spectra are determined for fixed soil-classes, instead of calculating the accelerations for each site in direct dependence on the soil composition. This leads to unrealistic sudden changes in the system's response. Therefore, earthquake spectra are calculated for different soil models in direct dependence of the shear modulus. Thus, both the acceleration spectra and the replacement springs match the soil composition. This enables a reasonable and consistent calculation of the system response for the actual conditions at each site.},
  language  = {en}
}
@inproceedings{MarkinkovicButenwegPaveseetal.2020,
  author    = {Markinkovic, Marko and Butenweg, Christoph and Pavese, A. and Lanese, I. and Hoffmeister, B. and Pinkawa, M. and Vulcu, C. and Bursi, O. and Nardin, C. and Paolacci, F. and Quinci, G. and Fragiadakis, M. and Weber, F. and Huber, P. and Renault, P. and G{\"u}ndel, M. and Dyke, S. and Ciucci, M. and Marino, A.},
  title     = {Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests},
  series = {Seismic design of industrial facilities 2020},
  booktitle = {Seismic design of industrial facilities 2020},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-729-0},
  pages     = {159 -- 172},
  year      = {2020},
  language  = {en}
}
@inproceedings{CacciatoreButenweg2020,
  author    = {Cacciatore, Pamela and Butenweg, Christoph},
  title     = {Seismic safety of cylindrical granular material steel silos under seismic loading},
  series = {Seismic design of industrial facilities 2020},
  booktitle = {Seismic design of industrial facilities 2020},
  publisher = {Apprimus Verlag},
  address   = {Aachen},
  isbn      = {978-3-86359-729-0},
  pages     = {231 -- 244},
  year      = {2020},
  language  = {en}
}
@inproceedings{GrundmannBauerBodenetal.2019,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Boden, Ralf Christian and Ceriotti, Matteo and Cordero, Federico and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Hercik, D. and Herique, A. and Ho, Tra-Mi and Jahnke, Rico and Kofman, Wlodek and Lange, Caroline and Lichtenheldt, Roy and McInnes, Colin R. and Mikschl, Tobias and Montenegro, Sergio and Moore, Iain and Pelivan, Ivanka and Peloni, Alessandro and Plettenmeier, Dirk and Quantius, Dominik and Reershemius, Siebo and Renger, Thomas and Riemann, Johannes and Rogez, Yves and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seboldt, Wolfgang and Seefeldt, Patric and Spietz, Peter and Spr{\"o}witz, Tom and Sznajder, Maciej and Toth, Norbert and Viavattene, Giulia and Wejmo, Elisabet and Wolff, Friederike and Ziach, Christian},
  title     = {Responsive exploration and asteroid characterization through integrated solar sail and lander development using small spacecraft technologies},
  series = {IAA Planetary Defense Conference},
  booktitle = {IAA Planetary Defense Conference},
  year      = {2019},
  abstract  = {In parallel to the evolution of the Planetary Defense Conference, the exploration of small solar system bodies has advanced from fast fly-bys on the sidelines of missions to the planets to the implementation of dedicated sample-return and in-situ analysis missions. Spacecraft of all sizes have landed, touch-and-go sampled, been gently beached, or impacted at hypervelocity on asteroid and comet surfaces. More have flown by close enough to image their surfaces in detail or sample their immediate environment, often as part of an extended or re-purposed mission. And finally, full-scale planetary defense experiment missions are in the making. Highly efficient low-thrust propulsion is increasingly applied beyond commercial use also in mainstream and flagship science missions, in combination with gravity assist propulsion. Another development in the same years is the growth of small spacecraft solutions, not in size but in numbers and individual capabilities. The on-going NASA OSIRIS-REx and JAXA HAYABUSA2 missions exemplify the trend as well as the upcoming NEA SCOUT mission or the landers MINERVA-II and MASCOT recently deployed on Ryugu. We outline likely as well as possible and efficient routes of continuation of all these developments towards a propellant-less and highly efficient class of spacecraft for small solar system body exploration: small spacecraft solar sails designed for carefree handling and equipped with carried landers and application modules, for all asteroid user communities -planetary science, planetary defence, and in-situ resource utilization. This projection builds on the experience gained in the development of deployable membrane structures leading up to the successful ground deployment test of a (20 m)² solar sail at DLR Cologne and in the 20 years since. It draws on the background of extensive trajectory optimization studies, the qualified technology of the DLR GOSSAMER-1 deployment demonstrator, and the MASCOT asteroid lander. These enable 'now-term' as well as near-term hardware solutions, and thus responsive fast-paced development. Mission types directly applicable to planetary defense include: single and Multiple NEA Rendezvous ((M)NR) for mitigation precursor, target monitoring and deflection follow-up tasks; sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation; and deployable membrane based methods to modify the asteroid's properties or interact with it. The DLR-ESTEC GOSSAMER Roadmap initiated studies of missions uniquely feasible with solar sails such as Displaced L1 (DL1) space weather advance warning and monitoring and Solar Polar Orbiter (SPO) delivery which demonstrate the capability of near-term solar sails to achieve NEA rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. For those mission types using separable payloads, such as SPO, (M)NR and RKI, design concepts can be derived from the separable Boom Sail Deployment Units characteristic of DLR GOSSAMER solar sail technology, nanolanders like MASCOT, or microlanders like the JAXA-DLR Jupiter Trojan Asteroid Lander for the OKEANOS mission which can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. These are an ideal match for solar sails in micro-spacecraft format whose launch configurations are compatible with ESPA and ASAP secondary payload platforms.},
  language  = {en}
}
@inproceedings{MoehrenBergmannJanseretal.2023,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {On the determination of harmonic propeller loads},
  series = {AIAA SCITECH 2023 Forum},
  booktitle = {AIAA SCITECH 2023 Forum},
  publisher = {AIAA},
  doi       = {10.2514/6.2023-2404},
  pages     = {12 Seiten},
  year      = {2023},
  abstract  = {Dynamic loads significantly impact the structural design of propeller blades due to fatigue and static strength. Since propellers are elastic structures, deformations and aerodynamic loads are coupled. In the past, propeller manufacturers established procedures to determine unsteady aerodynamic loads and the structural response with analytical steady-state calculations. According to the approach, aeroelastic coupling primarily consists of torsional deformations. They neglect bending deformations, deformation velocities, and inertia terms. This paper validates the assumptions above for a General Aviation propeller and a lift propeller for urban air mobility or large cargo drones. Fully coupled reduced-order simulations determine the dynamic loads in the time domain. A quasi-steady blade element momentum approach transfers loads to one-dimensional finite beam elements. The simulation results are in relatively good agreement with the analytical method for the General Aviation propeller but show increasing errors for the slender lift propeller. The analytical approach is modified to consider the induced velocities. Still, inertia and velocity proportional terms play a significant role for the lift propeller due to increased elasticity. The assumption that only torsional deformations significantly impact the dynamic loads of propellers is not valid. Adequate determination of dynamic loads of such designs requires coupled aeroelastic simulations or advanced analytical procedures.},
  language  = {en}
}
@inproceedings{Dachwald2005,
  author    = {Dachwald, Bernd},
  title     = {Global optimization of low-thrust space missions using evolutionary neurocontrol},
  series = {Proceedings of the international workshop on global optimization},
  booktitle = {Proceedings of the international workshop on global optimization},
  pages     = {85 -- 90},
  year      = {2005},
  abstract  = {Low-thrust space propulsion systems enable flexible high-energy deep space missions, but the design and optimization of the interplanetary transfer trajectory is usually difficult. It involves much experience and expert knowledge because the convergence behavior of traditional local trajectory optimization methods depends strongly on an adequate initial guess. Within this extended abstract, evolutionary neurocontrol, a method that fuses artificial neural networks and evolutionary algorithms, is proposed as a smart global method for low-thrust trajectory optimization. It does not require an initial guess. The implementation of evolutionary neurocontrol is detailed and its performance is shown for an exemplary mission.},
  language  = {en}
}
@inproceedings{SchartnerLoebDachwaldetal.2009,
  author    = {Schartner, Karl-Heinz and Loeb, H. W. and Dachwald, Bernd and Ohndorf, Andreas},
  title     = {Perspectives of electric propulsion for outer planetary and deep space missions},
  series = {European Planetary Science Congress 2009},
  booktitle = {European Planetary Science Congress 2009},
  pages     = {416 -- 416},
  year      = {2009},
  abstract  = {Solar-electric propulsion (SEP) is superior with respect to payload capacity, flight time and flexible launch window to the conventional interplanetary transfer method using chemical propulsion combined with gravity assists. This fact results from the large exhaust velocities of electric low-thrust propulsion and is favourable also for missions to the giant planets, Kuiper-belt objects and even for a heliopause probe (IHP) as shown in three studies by the authors funded by DLR. They dealt with a lander for Europa and a sample return mission from a mainbelt asteroid [1], with the TANDEM mission [2]; the third recent one investigates electric propulsion for the transfer to the edge of the solar system. All studies are based on triple-junction solar arrays, on rf-ion thrusters of the qualified RIT-22 type and they use the intelligent trajectory optimization program InTrance [3].},
  language  = {en}
}
@inproceedings{GrundmannBodenCeriottietal.2017,
  author    = {Grundmann, Jan Thimo and Boden, Ralf and Ceriotti, Matteo and Dachwald, Bernd and Dumont, Etienne and Grimm, Christian D. and Lange, Caroline and Lichtenheldt, Roy and Pelivan, Ivanka and Peloni, Alessandro and Riemann, Johannes and Spr{\"o}witz, Tom and Tardivel, Simon},
  title     = {Soil to sail-asteroid landers on near-term sailcraft as an evolution of the GOSSAMER small spacecraft solar sail concept for in-situ characterization},
  series = {5th IAA Planetary Defense Conference},
  booktitle = {5th IAA Planetary Defense Conference},
  pages     = {30 Seiten},
  year      = {2017},
  language  = {en}
}