@article{PeloniCeriottiDachwald2016,
  author    = {Peloni, Alessandro and Ceriotti, Matteo and Dachwald, Bernd},
  title     = {Solar-sail trajectory design for a multiple near-earth-asteroid rendezvous mission},
  series = {Journal of Guidance, Control, and Dynamics},
  volume    = {39},
  journal   = {Journal of Guidance, Control, and Dynamics},
  number    = {12},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {0731-5090},
  doi       = {10.2514/1.G000470},
  pages     = {2712 -- 2724},
  year      = {2016},
  abstract  = {The scientific interest for near-Earth asteroids as well as the interest in potentially hazardous asteroids from the perspective of planetary defense led the space community to focus on near-Earth asteroid mission studies. A multiple near-Earth asteroid rendezvous mission with close-up observations of several objects can help to improve the characterization of these asteroids. This work explores the design of a solar-sail spacecraft for such a mission, focusing on the search of possible sequences of encounters and the trajectory optimization. This is done in two sequential steps: a sequence search by means of a simplified trajectory model and a set of heuristic rules based on astrodynamics, and a subsequent optimization phase. A shape-based approach for solar sailing has been developed and is used for the first phase. The effectiveness of the proposed approach is demonstrated through a fully optimized multiple near-Earth asteroid rendezvous mission. The results show that it is possible to visit five near-Earth asteroids within 10 years with near-term solar-sail technology.},
  language  = {en}
}
@article{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple near-earth asteroid rendezvous mission: Solar-sailing options},
  series = {Advances in Space Research},
  journal   = {Advances in Space Research},
  number    = {In Press, Corrected Proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0273-1177},
  doi       = {10.1016/j.asr.2017.10.017},
  year      = {2017},
  language  = {en}
}
@inproceedings{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple NEA rendezvous mission: Solar sailing options},
  series = {Fourth International Symposium on Solar Sailing},
  booktitle = {Fourth International Symposium on Solar Sailing},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {The scientific interest in near-Earth asteroids (NEAs) and the classification of some of those as potentially hazardous asteroid for the Earth stipulated the interest in NEA exploration. Close-up observations of these objects will increase drastically our knowledge about the overall NEA population. For this reason, a multiple NEA rendezvous mission through solar sailing is investigated, taking advantage of the propellantless nature of this groundbreaking propulsion technology. Considering a spacecraft based on the DLR/ESA Gossamer technology, this work focuses on the search of possible sequences of NEA encounters. The effectiveness of this approach is demonstrated through a number of fully-optimized trajectories. The results show that it is possible to visit five NEAs within 10 years with near-term solar-sail technology. Moreover, a study on a reduced NEA database demonstrates the reliability of the approach used, showing that 58\% of the sequences found with an approximated trajectory model can be converted into real solar-sail trajectories. Lastly, this second study shows the effectiveness of the proposed automatic optimization algorithm, which is able to find solutions for a large number of mission scenarios without any input required from the user.},
  language  = {en}
}
@inproceedings{PenneProfittlichRingbecketal.2010,
  author    = {Penne, Jochen and Profittlich, Martin and Ringbeck, Thorsten and Buxbaum, Bernd},
  title     = {Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras},
  series = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  booktitle = {Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010},
  editor    = {D, Nicola D'Apuzzo},
  publisher = {Hometrica Consulting},
  address   = {Z{\"u}rich},
  isbn      = {978-3-033-02714-5},
  pages     = {361 -- 369},
  year      = {2010},
  language  = {en}
}
@article{PennerUsherovichNiedermeieretal.2022,
  author    = {Penner, Crystal and Usherovich, Samuel and Niedermeier, Jana and B{\´e}langer-Champagne, Camille and Trinczek, Michael and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Organic Scintillator-Fibre Sensors for Proton Therapy Dosimetry: SCSF-3HF and EJ-260},
  series = {electronics},
  volume    = {12},
  journal   = {electronics},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-9292},
  doi       = {10.3390/electronics12010011},
  pages     = {12 Seiten},
  year      = {2022},
  abstract  = {In proton therapy, the dose from secondary neutrons to the patient can contribute to side effects and the creation of secondary cancer. A simple and fast detection system to distinguish between dose from protons and neutrons both in pretreatment verification as well as potentially in vivo monitoring is needed to minimize dose from secondary neutrons. Two 3 mm long, 1 mm diameter organic scintillators were tested for candidacy to be used in a proton-neutron discrimination detector. The SCSF-3HF (1500) scintillating fibre (Kuraray Co. Chiyoda-ku, Tokyo, Japan) and EJ-260 plastic scintillator (Eljen Technology, Sweetwater, TX, USA) were irradiated at the TRIUMF Neutron Facility and the Proton Therapy Research Centre. In the proton beam, we compared the raw Bragg peak and spread-out Bragg peak response to the industry standard Markus chamber detector. Both scintillator sensors exhibited quenching at high LET in the Bragg peak, presenting a peak-to-entrance ratio of 2.59 for the EJ-260 and 2.63 for the SCSF-3HF fibre, compared to 3.70 for the Markus chamber. The SCSF-3HF sensor demonstrated 1.3 times the sensitivity to protons and 3 times the sensitivity to neutrons as compared to the EJ-260 sensor. Combined with our equations relating neutron and proton contributions to dose during proton irradiations, and the application of Birks' quenching correction, these fibres provide valid candidates for inexpensive and replicable proton-neutron discrimination detectors},
  language  = {en}
}
@book{PeterStrackeWeinzierletal.1995,
  author    = {Peter, M. and Stracke, Thomas and Weinzierl, C. and Faber, Christian and Schwarzer, Klemens},
  title     = {Verbundvorhaben zur Ermittlung der Leistungsf{\"a}higkeit von Sonnenheizsystemen zur Wassererw{\"a}rmung : Phase 2 (VELS II) ; Abschlussbericht},
  publisher = {Solar-Institut J{\"u}lich, Fachhochschule Aachen},
  address   = {J{\"u}lich},
  pages     = {87 S.},
  year      = {1995},
  language  = {de}
}
@inproceedings{PetersZiemonsDammersetal.2001,
  author    = {Peters, H. and Ziemons, Karl and Dammers, J. and M{\"u}ller-Veggian, Mattea},
  title     = {Continuous head motion detection during MEG measurement using head location coils},
  series = {Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland},
  booktitle = {Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland},
  editor    = {Nenonen, Jukka},
  publisher = {Helsinki Univ. of Technology, Laboratory of Biomedical Engineering},
  address   = {Espoo},
  isbn      = {951-22-5401-8},
  pages     = {XX, 1060 S. : Ill., graph. Darst.},
  year      = {2001},
  language  = {en}
}
@phdthesis{Peterson2008,
  author    = {Peterson, Leif Arne},
  title     = {Zum Tragverhalten nachgiebig verbundener Biegetr{\"a}ger aus Holz},
  publisher = {Fraunhofer IRB Verlag},
  address   = {Stuttgart},
  isbn      = {9783816775973},
  pages     = {169 Seiten},
  year      = {2008},
  abstract  = {In der vorliegenden Dissertation werden zun{\"a}chst die linear elastischen Bemessungsm{\"o}glichkeiten f{\"u}r nachgiebig verbundene Biegetr{\"a}ger unter statischer und dynamischer Beanspruchung diskutiert. Zum Vergleich wurden praktische Untersuchungen an zweiteiligen Kantholzbiegetr{\"a}gem mit mechanischen Verbindungsmitteln unterschiedlicher Verformungscharakteristika durchgef{\"u}hrt, ebenso wie umfangreiche Materialpr{\"u}fungen an den zusammengef{\"u}gten Einzelquerschnitten. Hierdurch werden die Unterschiede zum realen, nicht elastischen, statischen Tragverhalten aufgezeigt. Der f{\"u}r das dynamische Verhalten maßgebende Systemparameter der Eigenfrequenz wird f{\"u}r mehrteilige Biegetr{\"a}ger theoretisch hinterfragt und an den nachgiebig verbundenen Kantholzbiegetr{\"a}gem gemessen. Begleitet von weiteren praktischen Untersuchungen an einzelnen Verbindungsmitteln unter Blockscherbeanspruchung wird die rechnerische Ber{\"u}cksichtigung des plastischen Verbindungsmittelverhaltens auf zwei theoretischen Wegen erforscht. Auf Grundlage der Untersuchungen wird ein neues, semianalytisches y-Verfahren entwickelt. Gegen{\"u}ber den Berechnungen mit finiten Volumen- und Kontakt-Elementen erweist sich das neue Verfahren auf Basis der, um die schubweichen Fugen erweiterten, Balkentheorie als leistungsf{\"a}higer. Der Einfluss des plastischen Verbindungsmittelverhaltens wird durch vergleichende Parameterstudien mit diesem neuen Verfahren als vom anerkannten Stand der Technik ausreichend ber{\"u}cksichtigt identifiziert. F{\"u}r die linear elastische Dimensionierung werden optimierte Verbindungsmittelanordnungen hergeleitet, die durch {\"u}bersichtliche Erg{\"a}nzungen zum existierenden Bemessungskonzept des y-Verfahrens eine exaktere Berechnung erm{\"o}glichen.},
  language  = {de}
}
@incollection{Peterson2021,
  author    = {Peterson, Leif Arne},
  title     = {Holzbau},
  series = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II},
  booktitle = {Wof{\"u}r braucht man das eigentlich? Ein Handbuch f{\"u}r Mathematiklehrkr{\"a}fte der Sekundarstufe I und II},
  editor    = {Schl{\"u}ter, Dominik},
  publisher = {BoD},
  address   = {Norderstedt},
  isbn      = {978-3-7543-2606-0},
  pages     = {21 -- 23},
  year      = {2021},
  language  = {de}
}
@article{PetersonRoethUibel2017,
  author    = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas},
  title     = {Einsatz von Holzwerkstoffen in Fahrzeugstrukturen},
  series = {Bauen mit Holz},
  journal   = {Bauen mit Holz},
  number    = {3},
  publisher = {Bruderverlag},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  pages     = {32 -- 38},
  year      = {2017},
  language  = {de}
}
@inproceedings{PetersonRoethUibel2017,
  author    = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas},
  title     = {Holzwerkstoffe in Karosseriestrukturen},
  series = {Tagungsband Aachener Holzbautagung 2017},
  booktitle = {Tagungsband Aachener Holzbautagung 2017},
  editor    = {Uibel, Thormas and Peterson, Leif Arne and Baumann, Marcus},
  issn      = {2197-4489},
  pages     = {34 -- 45},
  year      = {2017},
  language  = {de}
}
@article{PetersonOsterPeterson2020,
  author    = {Peterson-Oster, Madeleine and Peterson, Leif Arne},
  title     = {Gewerbebau: Modellprojekt mit neuem elementiertem, freistehendem Fassadensystem},
  series = {Bauen mit Holz, Der Zimmermann},
  journal   = {Bauen mit Holz, Der Zimmermann},
  publisher = {Rudolf M{\"u}ller},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  year      = {2020},
  abstract  = {Die im Zuge einer Betriebs{\"u}bergabe anstehende Baumaßnahmen am eigenen B{\"u}ro- und Produktionsgeb{\"a}ude boten ideale Voraussetzung zur Anwendung einer raum­-kreierenden Außenhaut. Mit der elementierten, freistehenden Eichenholz-Fassade wurde ein bis dahin weitgehend funktionales Bauwerk substanzschonend und zugleich optisch ansprechender umgestaltet.},
  language  = {de}
}
@article{PetersonOsterPeterson2020,
  author    = {Peterson-Oster, Madeleine and Peterson, Leif Arne},
  title     = {Fassadensystem: Optisch ansprechend, freistehend, elementiert und aus Eichenholz},
  series = {Bauen mit Holz, Der Zimmermann},
  journal   = {Bauen mit Holz, Der Zimmermann},
  publisher = {Rudolf M{\"u}ller},
  address   = {K{\"o}ln},
  issn      = {0005-6545},
  year      = {2020},
  abstract  = {Bei der Entwicklung des Fassadensystems ging es darum die m{\"o}gliche Dauerhaftigkeit von Holz bei direkter Bewitterung zu maximieren. Gleichzeitig soll gezeigt werden, dass mittels durchdachter Ans{\"a}tze beim konstruktiven Holzschutz und die Wahl einer geeigneten Holzart langlebige Konstruktionen realisiert werden k{\"o}nnen.},
  language  = {de}
}
@inproceedings{PetryMandelartz2000,
  author    = {Petry, Martin and Mandelartz, Johannes},
  title     = {Wertorientiertes Instandhaltungsmanagement},
  series = {Maintenance ideas : von der technischen Diagnose zur betriebswirtschaftlichen Prognose ; Tagung Aachen, 16. und 17. Mai 2000. (VDI-Berichte. 1554)},
  booktitle = {Maintenance ideas : von der technischen Diagnose zur betriebswirtschaftlichen Prognose ; Tagung Aachen, 16. und 17. Mai 2000. (VDI-Berichte. 1554)},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091554-4},
  pages     = {627 -- 647},
  year      = {2000},
  language  = {de}
}
@article{PetryMandelartz2001,
  author    = {Petry, Martin and Mandelartz, Johannes},
  title     = {Wertorientiertes Instandhaltungsmanagement},
  series = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  volume    = {Bd. 54},
  journal   = {Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik},
  number    = {H. 3},
  issn      = {0044-2658},
  pages     = {134 -- 142},
  year      = {2001},
  language  = {de}
}
@article{Pfaff2015,
  author    = {Pfaff, Raphael},
  title     = {Praxisnahe Ausbildung im Fach Schienenfahrzeugtechnik},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {8},
  publisher = {Eisenbahn-Fachverlag},
  address   = {Mainz},
  issn      = {0172-4479},
  pages     = {52 -- 55},
  year      = {2015},
  language  = {de}
}
@phdthesis{Pfaff2013,
  author    = {Pfaff, Raphael},
  title     = {Evaluation and extension of the potential for application of the behavioural framework to practical engineering problems},
  pages     = {XVI, 231 S.},
  year      = {2013},
  language  = {en}
}
@masterthesis{Pfaff2007,
  type      = {Bachelor Thesis},
  author    = {Pfaff, Raphael},
  title     = {Automated processing of the ISL Doppler images},
  year      = {2007},
  language  = {en}
}
@misc{Pfaff2006,
  type      = {Master Thesis},
  author    = {Pfaff, Raphael},
  title     = {Modelling of nonlinear systems using piecewise defined models},
  year      = {2006},
  language  = {en}
}
@inproceedings{Pfaff2018,
  author    = {Pfaff, Raphael},
  title     = {Railway Challenge 2018 - Ein Wettbewerb f{\"u}r Parkbahn-Lokomotiven},
  series = {Deine Bahn},
  booktitle = {Deine Bahn},
  issn      = {0948-7263},
  pages     = {22 -- 24},
  year      = {2018},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Einsatz von offenen Onlinekursen in der Eisenbahnlehre},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {1},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {12 -- 16},
  year      = {2017},
  abstract  = {Eigene positive Erfahrungen mit Onlinekursen sowie die geringen Studierendenzahlen in der Pr{\"a}senzlehre gaben den Anstoß zu einem Experiment mit einem offenen Onlinekurs auf der Plattform Udemy. Die Erfahrungen sowohl bei der Erstellung und als auch im Lehrbetrieb waren positiv und f{\"u}hrten zu einer neuen Besch{\"a}ftigung mit Inhalten und Lernenden, getrieben durch die Anforderungen der Lernplattform.},
  language  = {de}
}
@article{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Apps f{\"u}r den G{\"u}terwagen? Wie der G{\"u}terwagen 4.0 die effiziente Integration der G{\"u}terbahn in ERTMS erm{\"o}glicht},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {de}
}
@inproceedings{Pfaff2017,
  author    = {Pfaff, Raphael},
  title     = {Analysis of Big Data Streams to obtain Braking Reliability Information for Train Protection systems},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@article{Pfaff2023,
  author    = {Pfaff, Raphael},
  title     = {Braking distance prediction for vehicle consist in low-speed on-sight operation: a Monte Carlo approach},
  series = {Railway Engineering Science},
  volume    = {31},
  journal   = {Railway Engineering Science},
  number    = {2},
  publisher = {SpringerOpen},
  issn      = {2662-4753 (eISSN)},
  doi       = {10.1007/s40534-023-00303-7},
  pages     = {135 -- 144},
  year      = {2023},
  abstract  = {The first and last mile of a railway journey, in both freight and transit applications, constitutes a high effort and is either non-productive (e.g. in the case of depot operations) or highly inefficient (e.g. in industrial railways). These parts are typically managed on-sight, i.e. with no signalling and train protection systems ensuring the freedom of movement. This is possible due to the rather short braking distances of individual vehicles and shunting consists. The present article analyses the braking behaviour of such shunting units. For this purpose, a dedicated model is developed. It is calibrated on published results of brake tests and validated against a high-definition model for low-speed applications. Based on this model, multiple simulations are executed to obtain a Monte Carlo simulation of the resulting braking distances. Based on the distribution properties and established safety levels, the risk of exceeding certain braking distances is evaluated and maximum braking distances are derived. Together with certain parameters of the system, these can serve in the design and safety assessment of driver assistance systems and automation of these processes.},
  language  = {en}
}
@inproceedings{PfaffBurnham2008,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  booktitle = {19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <19, 2008, Las Vegas, Nev.>},
  isbn      = {978-0-7695-3331-5 ; 978-0-7695-2719-2},
  pages     = {89 -- 94},
  year      = {2008},
  language  = {en}
}
@article{PfaffBurnham2009,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {Systems Science},
  volume    = {Vol. 35},
  journal   = {Systems Science},
  number    = {Iss. 2},
  issn      = {0137-1223},
  pages     = {19 -- 26},
  year      = {2009},
  language  = {en}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge. Teil 2: Ausgew{\"a}hlte technische Aspekte und Prozesse},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {66},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {74 -- 77},
  year      = {2017},
  language  = {de}
}
@article{PfaffEnning2017,
  author    = {Pfaff, Raphael and Enning, Manfred},
  title     = {Die nachhaltige Alternative zum autonomen Lastwagen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {10},
  pages     = {22 -- 26},
  year      = {2017},
  language  = {de}
}
@techreport{PfaffGeorgeSeileretal.2005,
  author    = {Pfaff, Raphael and George, Alfred and Seiler, Friedrich and Srulijes, Julio},
  title     = {Dopplerbild-Verfahren : Entwicklung einer neuen Auswertemethode. (Bericht / ISL / AGARD ; R 124/2005)},
  publisher = {ISL},
  address   = {Saint Louis, France},
  pages     = {X, 26 S. : Ill., graph. Darst.},
  year      = {2005},
  language  = {de}
}
@inproceedings{PfaffLarkowskiBurnham2011,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An application of adaptive control in the behavioural framework},
  series = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  booktitle = {21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Systems Engineering <21, 2011, Las Vegas>},
  isbn      = {978-1-4577-1078-0 ; 978-0-7695-4495-3},
  pages     = {49 -- 54},
  year      = {2011},
  language  = {en}
}
@inproceedings{PfaffLarkowskiBurnham2010,
  author    = {Pfaff, Raphael and Larkowski, Tomasz and Burnham, Keith J.},
  title     = {An approach to adaptive control in the behavioural framework},
  series = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  booktitle = {UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  organization    = {United Kingdom Automatic Control Council},
  isbn      = {978-1-62748-119-9},
  pages     = {833 -- 838},
  year      = {2010},
  language  = {en}
}
@inproceedings{PfaffMelcherFranzen2018,
  author    = {Pfaff, Raphael and Melcher, Karin and Franzen, Julian},
  title     = {Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems},
  series = {Proceedings of the European Conference of the PHM Society},
  volume    = {4},
  booktitle = {Proceedings of the European Conference of the PHM Society},
  number    = {1},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{PfaffMoshiriReichetal.2017,
  author    = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus},
  title     = {Modelling of the effect of sanding on the wheel-rail adhesion area},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffPichlerGeorgeetal.2007,
  author    = {Pfaff, Raphael and Pichler, Alexander and George, Alfred and Seiler, Friedrich},
  title     = {Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007},
  series = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620},
  booktitle = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620},
  publisher = {ISL},
  address   = {Saint Louis, France},
  organization    = {International Conference on Systems Science <16, 2007, Wroclaw>},
  pages     = {1 -- 10},
  year      = {2007},
  language  = {en}
}
@inproceedings{PfaffSappler2014,
  author    = {Pfaff, Raphael and Sappler, Magnus},
  title     = {TRANSPACT : die automatische Mittelpufferkupplung f{\"u}r attraktiven G{\"u}terverkehr},
  series = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  booktitle = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  publisher = {Verl. d. IFV Bahntechnik},
  address   = {Berlin},
  isbn      = {978-3-940727-41-1},
  pages     = {121 -- 128},
  year      = {2014},
  language  = {de}
}
@inproceedings{PfaffSchmidtEnning2017,
  author    = {Pfaff, Raphael and Schmidt, B. D. and Enning, Manfred},
  title     = {Towards inclusion of the freight rail system in the industrial internet of things - Wagon 4.0},
  series = {Stephenson Conference, London, March 2017},
  booktitle = {Stephenson Conference, London, March 2017},
  pages     = {1 -- 10},
  year      = {2017},
  language  = {en}
}
@article{PfaffSchmidt2016,
  author    = {Pfaff, Raphael and Schmidt, Bernd},
  title     = {Daten in der Cloud - und dann?},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {6},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {50 -- 55},
  year      = {2016},
  abstract  = {Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrstr{\"a}gern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. {\"U}ber eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen k{\"o}nnen mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverf{\"u}gbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen l{\"a}sst.},
  language  = {de}
}
@article{PfaffSchmidtPinders2015,
  author    = {Pfaff, Raphael and Schmidt, Bernd and Pinders, Udo},
  title     = {Energieeffizienz steigern durch Rekuperationseinrichtungen},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {5},
  publisher = {Eisenbahn-Fachverlag},
  address   = {Mainz},
  issn      = {0172-4479},
  pages     = {50 -- 53},
  year      = {2015},
  language  = {de}
}
@inproceedings{PfaffShahidiEnning2017,
  author    = {Pfaff, Raphael and Shahidi, Parham and Enning, Manfred},
  title     = {Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance},
  series = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  booktitle = {Asia-Pacific Conference of the Prognostics and Health Management Society},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffVinsonneauBurnham2006,
  author    = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.},
  title     = {Multiple models for nonlinear systems},
  series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  organization    = {International Conference on Systems Engineering <18, 2006, Coventry>},
  isbn      = {1-84600-013-0},
  pages     = {347 -- 352},
  year      = {2006},
  language  = {en}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  journal   = {Aachener Nachrichten / Aachener Zeitung : Sonderbeil. (2002)},
  publisher = {-},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Gute Chancen im Maschinenbau},
  series = {Rheinische Post : Sonderbeil. (2002)},
  journal   = {Rheinische Post : Sonderbeil. (2002)},
  year      = {2002},
  language  = {de}
}
@book{Pfeiffer1997,
  author    = {Pfeiffer, Johann},
  title     = {Design und Herstellen von Werkzeugen mit Freiformfl{\"a}chen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1997},
  language  = {de}
}
@book{Pfeiffer1996,
  author    = {Pfeiffer, Johann},
  title     = {Automatisierung in der Handhabungs- und Montagetechnik},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1996},
  language  = {de}
}
@book{Pfeiffer1994,
  author    = {Pfeiffer, Johann},
  title     = {Rechnergest{\"u}tzte Auslegung von Seiltrieben - Praxisimplementierung},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1994},
  language  = {de}
}
@book{Pfeiffer1993,
  author    = {Pfeiffer, Johann},
  title     = {Rechnergest{\"u}tzte Auslegung von Seiltrieben},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1993},
  language  = {de}
}
@article{Pfeiffer2003,
  author    = {Pfeiffer, Johann},
  title     = {Lernfeld 'Prozeßkette der Freiformfl{\"a}chenherstellung' : [Online-Ressource] / ... in Zus.-Arb. mit Johann Pfeiffer},
  series = {NUMAS - Ein Lehr- und Lernsystem zur Numerischen Mathematik und Statistik : [Online-Ressource] / Projektleitung: Gisela Engeln M{\"u}llges},
  journal   = {NUMAS - Ein Lehr- und Lernsystem zur Numerischen Mathematik und Statistik : [Online-Ressource] / Projektleitung: Gisela Engeln M{\"u}llges},
  publisher = {NUMAS.de},
  address   = {Aachen},
  year      = {2003},
  language  = {de}
}
@article{Pfeiffer2002,
  author    = {Pfeiffer, Johann},
  title     = {Chancen im Maschinenbau},
  series = {Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1},
  journal   = {Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1},
  publisher = {-},
  pages     = {2},
  year      = {2002},
  language  = {de}
}
@article{Pfeiffer2004,
  author    = {Pfeiffer, Johann},
  title     = {Genauigkeit und Qualit{\"a}t von Freiformfl{\"a}chen / Projektleiter: Joachim Gauchel},
  series = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  journal   = {Forschungsbericht 2004 / Hrsg.: Der Rektor der Fachhochschule Aachen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  pages     = {180},
  year      = {2004},
  language  = {de}
}
@book{Pfeiffer2004,
  author    = {Pfeiffer, Johann},
  title     = {Ein Beitrag zur systematischen Beschreibung der Parameter und deren Einfluss auf die Maßgenauigkeit und Oberfl{\"a}chenqualit{\"a}t bei der Erzeugung und Herstellung von Freiformgeometrien : das System CAD/CAM/CAQ - Generieren, Herstellen, Messen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {2004},
  language  = {de}
}
@book{Pfeiffer2003,
  author    = {Pfeiffer, Johann},
  title     = {3D-Freiformfl{\"a}chenmessung},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {2003},
  language  = {de}
}
@book{Pfeiffer2000,
  author    = {Pfeiffer, Johann},
  title     = {Genauigkeit und Qualit{\"a}t von Freiformfl{\"a}chen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {2000},
  language  = {de}
}
@book{Pfeiffer1999,
  author    = {Pfeiffer, Johann},
  title     = {Verbesserung der Qualit{\"a}t von Freiformoberfl{\"a}chen},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1999},
  language  = {de}
}
@book{Pfeiffer1997,
  author    = {Pfeiffer, Johann},
  title     = {HSP III Koordinatenmessger{\"a}t},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {1997},
  language  = {de}
}
@inproceedings{PfeifferBalcGebhardt2021,
  author    = {Pfeiffer, Johann and Balc, N. and Gebhardt, Andreas},
  title     = {Studie zur Untersuchung der Auswirkung von Fr{\"a}sbahnstrategien auf die Oberfl{\"a}chenqualit{\"a}t von mittels SLM gefertigten Metallteilen},
  series = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  booktitle = {Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz},
  publisher = {Verlag Ernst-Abbe-Hochschule Jena},
  address   = {Jena},
  isbn      = {978-3-932886-36-2},
  pages     = {99 -- 102},
  year      = {2021},
  abstract  = {F{\"u}r die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb zu den konventionellen Verfahren. Die erreichbaren Oberfl{\"a}chenqualit{\"a}ten der additiven sind nicht mit denen spanender Verfahren vergleichbar. F{\"u}r diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberfl{\"a}chenqualit{\"a}t nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.},
  language  = {de}
}
@article{PfeifferGauchel1997,
  author    = {Pfeiffer, Johann and Gauchel, Joachim},
  title     = {Entwicklung und Simulation von Mechanismen zu Automatisierungszwecken / Joachim Gauchel ; Johann Pfeiffer},
  series = {CAE Techniques : [proceedings of the 3st International Scientific Colloquium, Rzesz{\´o}w University of Technology, Poland, September 24-27, 1997] / ed. by Kazimierz E. Oczoś},
  journal   = {CAE Techniques : [proceedings of the 3st International Scientific Colloquium, Rzesz{\´o}w University of Technology, Poland, September 24-27, 1997] / ed. by Kazimierz E. Oczoś},
  publisher = {Politechnika Rzeszowska},
  address   = {Rzesz{\´o}w},
  isbn      = {83-7199-004-9},
  pages     = {425 ff},
  year      = {1997},
  language  = {de}
}
@book{PfeifferGauchel2004,
  author    = {Pfeiffer, Johann and Gauchel, Joachim},
  title     = {Kalibrierung Koordinatenmessger{\"a}t},
  publisher = {Fachhochsch.},
  address   = {Aachen},
  year      = {2004},
  language  = {de}
}
@article{PfeifferGauchelLuecke1999,
  author    = {Pfeiffer, Johann and Gauchel, Joachim and L{\"u}cke, Mathias},
  title     = {Genauigkeitsbetrachtungen in der CIM-Prozesskette},
  series = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  journal   = {4th International Scientific Colloquium CAx Techniques : proceedings of the 4th international scientific colloquium, Fachhochschule Bielefeld, Germany, September 13 - 15, 1999 / [organized in co-operation between Fachhochschule Bielefeld and Rzesz{\´o}w University of Technology ]. Ed. by Heinrich Ostholt},
  publisher = {[Fachhochsch.]},
  address   = {[Bielefeld]},
  isbn      = {3-00-004379-9},
  pages     = {323 -- 332},
  year      = {1999},
  language  = {de}
}
@book{PfeifferKnepper1995,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom-Ingenieur/Diplom-Ingenieurin ( Fachhochschule ) Maschinenbau - Allgemeiner Maschinenbau},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1995},
  language  = {de}
}
@book{PfeifferKnepper1998,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom Ingenieur/Diplom Ingenieurin (Fachhochschule) Maschinenbau Konstruktionstechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1998},
  language  = {de}
}
@book{PfeifferKnepper1999,
  author    = {Pfeiffer, Johann and Knepper, Ludger},
  title     = {Diplom-Ingenieur/Diplom-Ingenieurin (Fachhochschule) Maschinenbau Energie- und W{\"a}rmetechnik},
  publisher = {Bertelsmann},
  address   = {Bielefeld},
  pages     = {Losebl.-Ausg.},
  year      = {1999},
  language  = {de}
}
@incollection{PfetschAbeleAltherretal.2021,
  author    = {Pfetsch, Marc E. and Abele, Eberhard and Altherr, Lena and B{\"o}lling, Christian and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Groche, Peter and Hoppe, Florian and Kirchner, Eckhard and Kloberdanz, Hermann and Knoll, Maximilian and Kolvenbach, Philip and Kuttich-Meinlschmidt, Anja and Leise, Philipp and Lorenz, Ulf and Matei, Alexander and Molitor, Dirk A. and Niessen, Pia and Pelz, Peter F. and Rexer, Manuel and Schmitt, Andreas and Schmitt, Johann M. and Schulte, Fiona and Ulbrich, Stefan and Weigold, Matthias},
  title     = {Strategies for mastering uncertainty},
  series = {Mastering uncertainty in mechanical engineering},
  booktitle = {Mastering uncertainty in mechanical engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9_6},
  pages     = {365 -- 456},
  year      = {2021},
  abstract  = {This chapter describes three general strategies to master uncertainty in technical systems: robustness, flexibility and resilience. It builds on the previous chapters about methods to analyse and identify uncertainty and may rely on the availability of technologies for particular systems, such as active components. Robustness aims for the design of technical systems that are insensitive to anticipated uncertainties. Flexibility increases the ability of a system to work under different situations. Resilience extends this characteristic by requiring a given minimal functional performance, even after disturbances or failure of system components, and it may incorporate recovery. The three strategies are described and discussed in turn. Moreover, they are demonstrated on specific technical systems.},
  language  = {en}
}
@inproceedings{PflugWahle1994,
  author    = {Pflug, J. and Wahle, Michael},
  title     = {Auslegung der CFK-Sandwich-Rumpfstruktur eines Hubschraubers mit der Methode der Finiten Elemente},
  series = {Basistechnologien f{\"u}r neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt ; 1994,3)},
  booktitle = {Basistechnologien f{\"u}r neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt ; 1994,3)},
  editor    = {B{\"u}rger, Gudrun},
  publisher = {DGLR},
  address   = {Bonn},
  pages     = {1135 -- 1144},
  year      = {1994},
  language  = {de}
}
@inproceedings{PfundtVogelsangGerling1988,
  author    = {Pfundt, H. and Vogelsang, D. and Gerling, Ulrich},
  title     = {Calculation of the crust profile in aluminium reduction cells by thermal computer modelling},
  series = {Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989},
  booktitle = {Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989},
  publisher = {Minerals, Metals and Materials Soc.},
  address   = {Warrendale, Pa.},
  pages     = {371 -- 377},
  year      = {1988},
  language  = {en}
}
@phdthesis{Pham2011,
  author    = {Pham, Phu Tinh},
  title     = {Upper bound limit and shakedown analysis of elastic-plastic bounded linearly kinematic hardening structures},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  pages     = {140 S.},
  year      = {2011},
  language  = {en}
}
@inproceedings{PhamNguyenStaat2012,
  author    = {Pham, Phu Tinh and Nguyen, Thanh Ngoc and Staat, Manfred},
  title     = {FEM based shakedown analysis of hardening structures},
  series = {Proceedings International Conference on Advances in Computational Mechanics (ACOME)},
  booktitle = {Proceedings International Conference on Advances in Computational Mechanics (ACOME)},
  pages     = {870 -- 882},
  year      = {2012},
  language  = {en}
}
@article{PhamStaat2014,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {FEM-based shakedown analysis of hardening structures},
  series = {Asia Pacific journal on computational engineering},
  journal   = {Asia Pacific journal on computational engineering},
  number    = {1},
  publisher = {SpringerOpen},
  address   = {Berlin},
  issn      = {2196-1166 (E-Journal)},
  doi       = {10.1186/2196-1166-1-4},
  pages     = {Article No. 4},
  year      = {2014},
  abstract  = {This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-surface model of plasticity with a fixed bounding surface. The initial yield surface can translate inside the bounding surface, and it is bounded by one of the two equivalent conditions: (1) it always stays inside the bounding surface or (2) its centre cannot move outside the back-stress surface. The algorithm gives an effective tool to analyze the problems with a very high number of degree of freedom. Our numerical results are very close to the analytical solutions and numerical solutions in literature.},
  language  = {en}
}
@inproceedings{PhamStaat2015,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {A simplification for shakedown analysis of hardening structures},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@article{PhamStaat2013,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {71 -- 87},
  year      = {2013},
  language  = {en}
}
@article{PhamVuTranetal.2010,
  author    = {Pham, Phu Tinh and Vu, Khoi Duc and Tran, Thanh Ngoc and Staat, Manfred},
  title     = {A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies},
  pages     = {1 -- 7},
  year      = {2010},
  language  = {en}
}
@inproceedings{PhilippBrillowskiDammersetal.2020,
  author    = {Philipp, Brauner and Brillowski, Florian Sascha and Dammers, Hannah and K{\"o}nigs, Peter and Kordtomeikel, Frauke Carole and Petruck, Henning and Schaar, Anne Kathrin and Schmitz, Seth and Steuer-Dankert, Linda and Mertens, Alexander and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Nitsch, Verena and Schuh, G{\"u}nther and Ziefle, Martina},
  title     = {A research framework for human aspects in the internet of production: an intra-company perspective},
  series = {Proceedings of the AHFE 2020},
  booktitle = {Proceedings of the AHFE 2020},
  editor    = {Mrugalska, Beata and Trzcielinski, Stefan and Karwowski, Waldemar and Nicolantonio, Massimo Di and Roossi, Emilio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-51980-3},
  doi       = {10.1007/978-3-030-51981-0_1},
  pages     = {3 -- 17},
  year      = {2020},
  abstract  = {Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the "Internet of Production" (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.},
  language  = {en}
}
@article{PhilippEfthimiouPaganoetal.2022,
  author    = {Philipp, Mohr and Efthimiou, Nikos and Pagano, Fiammetta and Kratochwil, Nicolaus and Pizzichemi, Marco and Tsoumpas, Charalampos and Auffray, Etiennette and Ziemons, Karl},
  title     = {Image reconstruction analysis for positron emission tomography with heterostructured scintillators},
  series = {IEEE Transactions on Radiation and Plasma Medical Sciences},
  volume    = {7},
  journal   = {IEEE Transactions on Radiation and Plasma Medical Sciences},
  number    = {1},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2469-7311},
  doi       = {10.1109/TRPMS.2022.3208615},
  pages     = {41 -- 51},
  year      = {2022},
  abstract  = {The concept of structure engineering has been proposed for exploring the next generation of radiation detectors with improved performance. A TOF-PET geometry with heterostructured scintillators with a pixel size of 3.0×3.1×15 mm3 was simulated using Monte Carlo. The heterostructures consisted of alternating layers of BGO as a dense material with high stopping power and plastic (EJ232) as a fast light emitter. The detector time resolution was calculated as a function of the deposited and shared energy in both materials on an event-by-event basis. While sensitivity was reduced to 32\% for 100 μm thick plastic layers and 52\% for 50 μm, the CTR distribution improved to 204±49 ps and 220±41 ps respectively, compared to 276 ps that we considered for bulk BGO. The complex distribution of timing resolutions was accounted for in the reconstruction. We divided the events into three groups based on their CTR and modeled them with different Gaussian TOF kernels. On a NEMA IQ phantom, the heterostructures had better contrast recovery in early iterations. On the other hand, BGO achieved a better contrast to noise ratio (CNR) after the 15th iteration due to the higher sensitivity. The developed simulation and reconstruction methods constitute new tools for evaluating different detector designs with complex time responses.},
  language  = {en}
}
@article{PichlerGeorgeSeileretal.2009,
  author    = {Pichler, A. and George, A. and Seiler, F. and Srulijes, J. and Havermann, Marc},
  title     = {Doppler Picture Velocimetry (DPV) applied to hypersonics},
  series = {Shock Waves [Elektronische Ressource] : 26th International Symposium on Shock Waves, Volume 1 / edited by Klaus Hannemann, Friedrich Seiler},
  journal   = {Shock Waves [Elektronische Ressource] : 26th International Symposium on Shock Waves, Volume 1 / edited by Klaus Hannemann, Friedrich Seiler},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-85168-4},
  pages     = {503 -- 508},
  year      = {2009},
  language  = {en}
}
@article{Pick2006,
  author    = {Pick, J{\"u}rgen},
  title     = {Kalkulation},
  series = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].},
  journal   = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8351-0002-2},
  pages     = {146 -- 365},
  year      = {2006},
  language  = {de}
}
@article{PickKremer2006,
  author    = {Pick, J{\"u}rgen and Kremer, Norbert},
  title     = {Kalkulation - Bauauftragsrechnung},
  series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.},
  journal   = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {3-519-65220-X},
  pages     = {833 -- 929},
  year      = {2006},
  language  = {de}
}
@incollection{PielenRoethFlatten2018,
  author    = {Pielen, Michael and R{\"o}th, Thilo and Flatten, T.},
  title     = {Erfolgsfaktoren k{\"u}nftiger Gesch{\"a}ftsmodelle von urbanen, geteilten Mobilit{\"a}tsdienstleistungen},
  series = {Mobilit{\"a}t und digitale Transformation. (9. Wissenschaftsforum Mobilit{\"a}t. Tagungsband)},
  booktitle = {Mobilit{\"a}t und digitale Transformation. (9. Wissenschaftsforum Mobilit{\"a}t. Tagungsband)},
  editor    = {Proff, H.},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-20779-3},
  doi       = {10.1007/978-3-658-20779-3_2},
  pages     = {435 -- 448},
  year      = {2018},
  abstract  = {Digitalisierung bezeichnet die Nutzung großer Datenmengen, die zu einer umfassenden Vernetzung aller Bereiche der Wirtschaft und Gesellschaft f{\"u}hren wird (BMWi, 2015 und {\"a}hnlich K{\"o}hler/Wollschl{\"a}ger, 2014: 79). Sie umfasst die Erhebung von analogen Informationen („Big Data" in einem engen Sinne; z.B. O´Leary, 2013), ihre Speicherung in einem digitaltechnischen System (lokale Speicherung oder „Cloud Computing" durch die Weiterentwickelung des Internets; z.B. Hashem et al., 2015: 101), die Analyse und Interpretation sowie den Transfer in andere Systeme („Internet der Dinge" bzw. „Internet of Things"; z.B. Ashton, 2009).},
  language  = {de}
}
@book{PieperBellingerBuggertetal.2013,
  author    = {Pieper, Jan and Bellinger, Reto and Buggert, Daniel and Finkeldei, Ines and Fissabre, Anke and Hake, Verena and Helmenstein, Caroline and Schindler, Bruno and Sch{\"o}tten, Bj{\"o}rn},
  title     = {Messen - zeichnen - verstehen : eine kritische Retrospektive auf Themen, Methoden und Trouvaillen der Baugeschichte von Jan Pieper und seinen Mitarbeitern an der TU Berlin und der RWTH Aachen (1983 - 2013)},
  publisher = {Geym{\"u}ller Verlag f{\"u}r Architektur},
  address   = {Aachen ; Berlin},
  isbn      = {978-3-943164-12-1},
  pages     = {64 S. : zahlr. Ill. und graph. Darst.},
  year      = {2013},
  language  = {de}
}
@book{PieperBuggertFissabreetal.2019,
  author    = {Pieper, Jan and Buggert, Daniel and Fissabre, Anke and Helmenstein, Caroline and Niethammer, Bernhard and Schindler, Bruno},
  title     = {Sabbioneta: Atlas},
  publisher = {Geym{\"u}ller - Verlag f{\"u}r Architektur},
  address   = {Aachen},
  isbn      = {978-3-943164-21-3},
  pages     = {264 S.},
  year      = {2019},
  language  = {de}
}
@article{Pieper2009,
  author    = {Pieper, Martin},
  title     = {Vector hyperinterpolation on the sphere},
  series = {Journal of approximation theory. 156 (2009), H. 2},
  journal   = {Journal of approximation theory. 156 (2009), H. 2},
  isbn      = {0021-9045},
  pages     = {173 -- 186},
  year      = {2009},
  language  = {en}
}
@book{Pieper2007,
  author    = {Pieper, Martin},
  title     = {Spektralrandintegralmethoden zur Maxwell-Gleichung},
  publisher = {Der Andere Verl.},
  address   = {T{\"o}nning [u.a.]},
  isbn      = {978-3-89959-635-9},
  pages     = {144 S. : graph. Darst.},
  year      = {2007},
  language  = {de}
}
@article{Pieper2008,
  author    = {Pieper, Martin},
  title     = {Nonlinear integral equations for an inverse electromagnetic scattering problem},
  series = {Journal of Physics Conference Series. 124 (2008)},
  journal   = {Journal of Physics Conference Series. 124 (2008)},
  isbn      = {1742-6596},
  year      = {2008},
  language  = {en}
}
@article{Pieper2011,
  author    = {Pieper, Martin},
  title     = {Multiobjective optimization with expensive objectives applied to a thermodynamic material design problem},
  series = {Proceedings in applied mathematics and mechanics : PAMM. 11 (2011), H. 1},
  journal   = {Proceedings in applied mathematics and mechanics : PAMM. 11 (2011), H. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1617-7061},
  pages     = {733 -- 734},
  year      = {2011},
  language  = {en}
}
@book{Pieper2019,
  author    = {Pieper, Martin},
  title     = {Quantenmechanik : Einf{\"u}hrung in die mathematische Formulierung},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-658-28329-2},
  doi       = {10.1007/978-3-658-28329-2},
  year      = {2019},
  language  = {de}
}
@book{Pieper2019,
  author    = {Pieper, Martin},
  title     = {Quantenmechanik: Einf{\"u}hrung in die mathematische Formulierung},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-658-28328-5},
  doi       = {10.1007/978-3-658-28329-2},
  pages     = {XI, 33 Seiten},
  year      = {2019},
  language  = {de}
}
@book{Pieper2017,
  author    = {Pieper, Martin},
  title     = {Mathematische Optimierung: Eine Einf{\"u}hrung in die kontinuierliche Optimierung mit Beispielen},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-16975-6},
  doi       = {10.1007/978-3-658-16975-6},
  pages     = {IX, 53 S. 20 Abb.},
  year      = {2017},
  language  = {de}
}
@book{Pieper2021,
  author    = {Pieper, Martin},
  title     = {Quantum mechanics: Introduction to mathematical formulation},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-32644-9},
  doi       = {10.1007/978-3-658-32645-6},
  pages     = {XIII, 33},
  year      = {2021},
  abstract  = {Anyone who has always wanted to understand the hieroglyphs on Sheldon's blackboard in the TV series The Big Bang Theory or who wanted to know exactly what the fate of Schr{\"o}dinger's cat is all about will find a short, descriptive introduction to the world of quantum mechanics in this essential. The text particularly focuses on the mathematical description in the Hilbert space. The content goes beyond popular scientific presentations, but is nevertheless suitable for readers without special prior knowledge thanks to the clear examples.},
  language  = {en}
}
@inproceedings{Pieper2018,
  author    = {Pieper, Martin},
  title     = {Digitale Hochschullehre in mathematischen und mathematikdidaktischen Veranstaltungen},
  series = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 1},
  booktitle = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 1},
  publisher = {WTM-Verlag},
  address   = {M{\"u}nster},
  isbn      = {978-3-95987-089-4},
  pages     = {105 -- 106},
  year      = {2018},
  language  = {de}
}
@inproceedings{Pieper2018,
  author    = {Pieper, Martin},
  title     = {Lernzielorientierte Kurse und Stack Aufgaben in der Mathematikausbildung},
  series = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 3},
  booktitle = {Beitr{\"a}ge zum Mathematikunterricht 2018 : Vortr{\"a}ge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft f{\"u}r Didaktik der Mathematik). Bd. 3},
  publisher = {WTM-Verlag},
  address   = {M{\"u}nster},
  isbn      = {978-3-95987-089-4},
  pages     = {1399 -- 1402},
  year      = {2018},
  language  = {de}
}
@article{PieperIvanyshyn2008,
  author    = {Pieper, Martin and Ivanyshyn, Olha},
  title     = {Nonlinear integral equations for a 3D inverse acoustic scattering problem : abstract / O. Ivanyshyn and M. Pieper},
  year      = {2008},
  language  = {en}
}
@article{PieperKlein2011,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {A simple and accurate numerical network flow model for bionic micro heat exchangers},
  series = {Heat mass transfer},
  volume    = {47},
  journal   = {Heat mass transfer},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {0947-7411},
  pages     = {491 -- 503},
  year      = {2011},
  language  = {en}
}
@article{PieperKlein2012,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {Application of simple, periodic homogenization techniques to non-linear heat conduction problems in non-periodic, porous media},
  series = {Heat mass transfer},
  volume    = {48},
  journal   = {Heat mass transfer},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0947-7411},
  doi       = {10.1007/s00231-011-0879-4},
  pages     = {291 -- 300},
  year      = {2012},
  abstract  = {Often, detailed simulations of heat conduction in complicated, porous media have large runtimes. Then homogenization is a powerful tool to speed up the calculations by preserving accurate solutions at the same time. Unfortunately real structures are generally non-periodic, which requires unpractical, complicated homogenization techniques. We demonstrate in this paper, that the application of simple, periodic techniques to realistic media, that are just close to periodic, gives accurate, approximative solutions. In order to obtain effective parameters for the homogenized heat equation, we have to solve a so called "cell problem". In contrast to periodic structures it is not trivial to determine a suitable unit cell, which represents a non-periodic media. To overcome this problem, we give a rule of thumb on how to choose a good cell. Finally we demonstrate the efficiency of our method for virtually generated foams as well as real foams and compare these results to periodic structures.},
  language  = {en}
}
@article{PieperKlein2010,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {Numerical solution of the heat equation with non-linear, time derivative-dependent source term},
  series = {International Journal for Numerical Methods in Engineering},
  volume    = {84},
  journal   = {International Journal for Numerical Methods in Engineering},
  number    = {10},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {0029-5981},
  doi       = {10.1002/nme.2937},
  pages     = {1205 -- 1221},
  year      = {2010},
  abstract  = {The mathematical modeling of heat conduction with adsorption effects in coated metal structures yields the heat equation with piecewise smooth coefficients and a new kind of source term. This term is special, because it is non-linear and furthermore depends on a time derivative. In our approach we reformulated this as a new problem for the usual heat equation, without source term but with a new non-linear coefficient. We gave an existence and uniqueness proof for the weak solution of the reformulated problem. To obtain a numerical solution, we developed a semi-implicit and a fully implicit finite volume method. We compared these two methods theoretically as well as numerically. Finally, as practical application, we simulated the heat conduction in coated aluminum fibers with adsorption in the zeolite coating. Copyright © 2010 John Wiley \& Sons, Ltd.},
  language  = {en}
}
@inproceedings{PieperKonopka2013,
  author    = {Pieper, Martin and Konopka, Mahnaz},
  title     = {Umgestaltung der Mathematik Anf{\"a}ngervorlesungen im Fachbereich Energietechnik},
  series = {Mathematik im {\"U}bergang Schule/Hochschule und im ersten Studienjahr : extended abstracts zur 2. khdm-Arbeitstagung 20.02. - 23.02.2013. (khdm-Report ; 13-01)},
  booktitle = {Mathematik im {\"U}bergang Schule/Hochschule und im ersten Studienjahr : extended abstracts zur 2. khdm-Arbeitstagung 20.02. - 23.02.2013. (khdm-Report ; 13-01)},
  pages     = {115 -- 116},
  year      = {2013},
  language  = {de}
}
@inproceedings{PieperSchulz2014,
  author    = {Pieper, Martin and Schulz, Silvia},
  title     = {Teaching Simulation Methods with COMSOL Multiphysics},
  organization    = {COMSOL Conference <2014, Cambridge>},
  pages     = {7},
  year      = {2014},
  abstract  = {This paper describes two courses on simulation methods for graduate students: "Simulation Methods" and "Simulation and Optimization in Virtual Engineering" The courses were planned to teach young engineers how to work with simulation software as well as to understand the necessary mathematical background. As simulation software COMSOL is used. The main philosophy was to combine theory and praxis in a way that motivates the students. In addition "soft skills" should be improved. This was achieved by project work as final examination. As underlying didactical principle the ideas of Bloom's revised taxonomy were followed. The paper basically focusses on educational aspects, e.g. how to structure the course, plan the exercises, organize the project work and include practical COMSOL examples.},
  language  = {en}
}
@incollection{PieperWaehlisch2017,
  author    = {Pieper, Martin and W{\"a}hlisch, Georg},
  title     = {Mehrwert von E-Learning durch f{\"a}cher{\"u}bergreifenden Einsatz},
  series = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  booktitle = {Teaching is Touching the Future \& ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Pr{\"u}fen},
  publisher = {UVW Universit{\"a}tsverlag Webler},
  address   = {Bielefeld},
  isbn      = {978-3-946017-05-9},
  pages     = {193 -- 196},
  year      = {2017},
  language  = {de}
}
@misc{PierHummenStellberg1996,
  author    = {Pier, Arnold and Hummen, J{\"o}rg and Stellberg, Michael},
  title     = {Surgical clip applicator},
  pages     = {16, 7, 2 S. : graph. Darst.},
  year      = {1996},
  language  = {en}
}
@misc{PierHummenStellberg1996,
  author    = {Pier, Arnold and Hummen, J{\"o}rg and Stellberg, Michael},
  title     = {Chirurgischer Klammerapplikator},
  pages     = {4 Bl., 7 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@incollection{PieronekKleefeld2019,
  author    = {Pieronek, Lukas and Kleefeld, Andreas},
  title     = {The Method of Fundamental Solutions for Computing Interior Transmission Eigenvalues of Inhomogeneous Media},
  series = {Integral Methods in Science and Engineering: Analytic Treatment and Numerical Approximations},
  booktitle = {Integral Methods in Science and Engineering: Analytic Treatment and Numerical Approximations},
  editor    = {Constanda, Christian and Harris, Paul},
  publisher = {Birkh{\"a}user},
  address   = {Cham},
  isbn      = {978-3-030-16077-7},
  doi       = {10.1007/978-3-030-16077-7_28},
  pages     = {353 -- 365},
  year      = {2019},
  abstract  = {The method of fundamental solutions is applied to the approximate computation of interior transmission eigenvalues for a special class of inhomogeneous media in two dimensions. We give a short approximation analysis accompanied with numerical results that clearly prove practical convenience of our alternative approach.},
  language  = {en}
}
@article{PieronekKleefeld2024,
  author    = {Pieronek, Lukas and Kleefeld, Andreas},
  title     = {On trajectories of complex-valued interior transmission eigenvalues},
  series = {Inverse problems and imaging : IPI},
  volume    = {18},
  journal   = {Inverse problems and imaging : IPI},
  number    = {2},
  publisher = {AIMS},
  address   = {Springfield, Mo},
  issn      = {1930-8337 (Print)},
  doi       = {10.3934/ipi.2023041},
  pages     = {480 -- 516},
  year      = {2024},
  abstract  = {This paper investigates the interior transmission problem for homogeneous media via eigenvalue trajectories parameterized by the magnitude of the refractive index. In the case that the scatterer is the unit disk, we prove that there is a one-to-one correspondence between complex-valued interior transmission eigenvalue trajectories and Dirichlet eigenvalues of the Laplacian which turn out to be exactly the trajectorial limit points as the refractive index tends to infinity. For general simply-connected scatterers in two or three dimensions, a corresponding relation is still open, but further theoretical results and numerical studies indicate a similar connection.},
  language  = {en}
}
@article{Pietsch1992,
  author    = {Pietsch, Wolfram},
  title     = {Planung und Steuerung CASE-gest{\"u}tzter Software-Projekte},
  series = {Projektmanagement-Forum '92 : Dokumentation ; [Tagungszentrum Rosengarten Mannheim, 14. - 16. Oktober 1992] / hrsg. von Dietmar Lange ... [Gesellschaft f{\"u}r Projektmanagement INTERNET Deutschland e.V.]},
  journal   = {Projektmanagement-Forum '92 : Dokumentation ; [Tagungszentrum Rosengarten Mannheim, 14. - 16. Oktober 1992] / hrsg. von Dietmar Lange ... [Gesellschaft f{\"u}r Projektmanagement INTERNET Deutschland e.V.]},
  publisher = {GPM},
  address   = {M{\"u}nchen},
  isbn      = {3924841128},
  pages     = {353 -- 363},
  year      = {1992},
  language  = {de}
}