@inproceedings{PompSchwarzboezlKolletal.2010,
  author    = {Pomp, Stefan and Schwarzb{\"o}zl, Peter and Koll, Gerrit and Hennecke, Klaus and Schmitz, Mark and Hoffschmidt, Bernhard},
  title     = {Advanced concept for a solar thermal power plant with open volumetric air receiver},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {97 -- 98},
  year      = {2010},
  language  = {en}
}
@article{SchulzeFeyerlPischinger2023,
  author    = {Schulze, Sven and Feyerl, G{\"u}nter and Pischinger, Stefan},
  title     = {Advanced ECMS for hybrid electric heavy-duty trucks with predictive battery discharge and adaptive operating strategy under real driving conditions},
  series = {Energies},
  volume    = {16},
  journal   = {Energies},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en16135171},
  pages     = {29 Seiten, Art. Nr.: 5171},
  year      = {2023},
  abstract  = {To fulfil the CO2 emission reduction targets of the European Union (EU), heavy-duty (HD) trucks need to operate 15\% more efficiently by 2025 and 30\% by 2030. Their electrification is necessary as conventional HD trucks are already optimized for the long-haul application. The resulting hybrid electric vehicle (HEV) truck gains most of the fuel saving potential by the recuperation of potential energy and its consecutive utilization. The key to utilizing the full potential of HEV-HD trucks is to maximize the amount of recuperated energy and ensure its intelligent usage while keeping the operating point of the internal combustion engine as efficient as possible. To achieve this goal, an intelligent energy management strategy (EMS) based on ECMS is developed for a parallel HEV-HD truck which uses predictive discharge of the battery and adaptive operating strategy regarding the height profile and the vehicle mass. The presented EMS can reproduce the global optimal operating strategy over long phases and lead to a fuel saving potential of up to 2\% compared with a heuristic strategy. Furthermore, the fuel saving potential is correlated with the investigated boundary conditions to deepen the understanding of the impact of intelligent EMS for HEV-HD trucks.},
  language  = {en}
}
@article{AbbasHedwigBalcetal.2023,
  author    = {Abbas, Karim and Hedwig, Lukas and Balc, Nicolae and Bremen, Sebastian},
  title     = {Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling},
  series = {Polymers},
  volume    = {2023},
  journal   = {Polymers},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/polym15214293},
  pages     = {Artikel 4293},
  year      = {2023},
  abstract  = {Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK's economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100\% solid and subjected to thermal post-treatment. This corresponds to a 20\% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15\% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70\% in tool production.},
  language  = {en}
}
@article{HeuermannRumiantsevSchott2004,
  author    = {Heuermann, Holger and Rumiantsev, A. and Schott, S.},
  title     = {Advanced on-wafer multiport calibration methods for mono- and mixed-mode device characterization},
  series = {On wafer characterization : 63rd ARFTG conference digest, spring 2004, 11 June 2004, Fort Worth, TX / Automatic RF Techniques Group. [Conference chair: John Cable. Publication chair: J. G. Burns]},
  journal   = {On wafer characterization : 63rd ARFTG conference digest, spring 2004, 11 June 2004, Fort Worth, TX / Automatic RF Techniques Group. [Conference chair: John Cable. Publication chair: J. G. Burns]},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-8371-0},
  pages     = {91 -- 96},
  year      = {2004},
  language  = {en}
}
@inproceedings{NowackRoethBuehrigPolaczeketal.2008,
  author    = {Nowack, N. and R{\"o}th, Thilo and B{\"u}hrig-Polaczek, A. and Klaus, G.},
  title     = {Advanced Sheet Metal Components Reinforced by Light Metal Cast Structures},
  series = {Aluminium alloys : their physical and mechanical properties ; [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany ; ICAA 11]},
  booktitle = {Aluminium alloys : their physical and mechanical properties ; [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany ; ICAA 11]},
  number    = {2},
  editor    = {Hirsch, J{\"u}rgen},
  isbn      = {978-3-527-32367-8},
  pages     = {2374 -- 2381},
  year      = {2008},
  language  = {en}
}
@article{MuellerVeggianColauttiConteetal.1999,
  author    = {M{\"u}ller-Veggian, Mattea and Colautti, P. and Conte, V. and De Nardo, L.},
  title     = {Advanced TEPC (Tissue-equivalent proportional counters) for radiation monitoring},
  series = {Annual report / Istituto Nazionale di Fisica Nucleare, LNL, Laboratori Nazionali di Legnaro. 1998 (1999)},
  journal   = {Annual report / Istituto Nazionale di Fisica Nucleare, LNL, Laboratori Nazionali di Legnaro. 1998 (1999)},
  pages     = {106},
  year      = {1999},
  language  = {en}
}
@article{SchwagerFleschSchwarzboezletal.2022,
  author    = {Schwager, Christian and Flesch, Robert and Schwarzb{\"o}zl, Peter and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e}},
  title     = {Advanced two phase flow model for transient molten salt receiver system simulation},
  series = {Solar Energy},
  volume    = {232},
  journal   = {Solar Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0038-092X (print)},
  doi       = {10.1016/j.solener.2021.12.065},
  pages     = {362 -- 375},
  year      = {2022},
  abstract  = {In order to realistically predict and optimize the actual performance of a concentrating solar power (CSP) plant sophisticated simulation models and methods are required. This paper presents a detailed dynamic simulation model for a Molten Salt Solar Tower (MST) system, which is capable of simulating transient operation including detailed startup and shutdown procedures including drainage and refill. For appropriate representation of the transient behavior of the receiver as well as replication of local bulk and surface temperatures a discretized receiver model based on a novel homogeneous two-phase (2P) flow modelling approach is implemented in Modelica Dymola®. This allows for reasonable representation of the very different hydraulic and thermal properties of molten salt versus air as well as the transition between both. This dynamic 2P receiver model is embedded in a comprehensive one-dimensional model of a commercial scale MST system and coupled with a transient receiver flux density distribution from raytracing based heliostat field simulation. This enables for detailed process prediction with reasonable computational effort, while providing data such as local salt film and wall temperatures, realistic control behavior as well as net performance of the overall system. Besides a model description, this paper presents some results of a validation as well as the simulation of a complete startup procedure. Finally, a study on numerical simulation performance and grid dependencies is presented and discussed.},
  language  = {en}
}
@article{GoettscheReillyWittwer1991,
  author    = {G{\"o}ttsche, Joachim and Reilly, S. and Wittwer, Volker},
  title     = {Advanced window systems and building energy performance / S. Reilly ; J. G{\"o}ttsche ; V. Wittwer},
  series = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...},
  journal   = {Solar World Congress, 1991 : proceedings of the biennial congress of the International Solar Energy Society, Denver, Colorado, USA, 19-23 August 1991 / ed. by M. E. Arden ...},
  publisher = {Pergamon Press},
  address   = {Oxford [u.a.]},
  isbn      = {0-08-041690-X},
  pages     = {3211 -- 3216},
  year      = {1991},
  language  = {en}
}
@article{ZhantlessovaSavitskayaKistaubayevaetal.2022,
  author    = {Zhantlessova, Sirina and Savitskaya, Irina and Kistaubayeva, Aida and Ignatova, Ludmila and Talipova, Aizhan and Pogrebnjak, Alexander and Digel, Ilya},
  title     = {Advanced "Green" prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy},
  series = {Polymers},
  volume    = {14},
  journal   = {Polymers},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  doi       = {10.3390/polym14153224},
  pages     = {Artikel 3224},
  year      = {2022},
  abstract  = {Bacterial cellulose (BC) is a biopolymer produced by different microorganisms, but in biotechnological practice, Komagataeibacter xylinus is used. The micro- and nanofibrillar structure of BC, which forms many different-sized pores, creates prerequisites for the introduction of other polymers into it, including those synthesized by other microorganisms. The study aims to develop a cocultivation system of BC and prebiotic producers to obtain BC-based composite material with prebiotic activity. In this study, pullulan (PUL) was found to stimulate the growth of the probiotic strain Lactobacillus rhamnosus GG better than the other microbial polysaccharides gellan and xanthan. BC/PUL biocomposite with prebiotic properties was obtained by cocultivation of Komagataeibacter xylinus and Aureobasidium pullulans, BC and PUL producers respectively, on molasses medium. The inclusion of PUL in BC is proved gravimetrically by scanning electron microscopy and by Fourier transformed infrared spectroscopy. Cocultivation demonstrated a composite effect on the aggregation and binding of BC fibers, which led to a significant improvement in mechanical properties. The developed approach for "grafting" of prebiotic activity on BC allows preparation of environmentally friendly composites of better quality.},
  language  = {en}
}
@inproceedings{GerhardsSchleserOtten2019,
  author    = {Gerhards, Benjamin and Schleser, Markus and Otten, Christian},
  title     = {Advancements of mobile vacuum laser welding for industrial thick sheet applications},
  series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava},
  pages     = {1 -- 8},
  year      = {2019},
  language  = {en}
}
@article{WeberRuffStahl2017,
  author    = {Weber, Tobias and Ruff-Stahl, Hans-Joachim K.},
  title     = {Advances in Composite Manufacturing of Helicopter Parts},
  series = {International Journal of Aviation, Aeronautics, and Aerospace},
  volume    = {4},
  journal   = {International Journal of Aviation, Aeronautics, and Aerospace},
  number    = {1},
  issn      = {2374-6793},
  doi       = {10.15394/ijaaa.2017.1153},
  year      = {2017},
  language  = {en}
}
@inproceedings{OttenSchmidtWeber2016,
  author    = {Otten, D. and Schmidt, M. and Weber, Tobias},
  title     = {Advances in Determination of Material Parameters for Functional Simulations Based on Process Simulations},
  series = {SAMPE Europe Conference 16 Liege},
  booktitle = {SAMPE Europe Conference 16 Liege},
  isbn      = {978-1-5108-3800-0},
  pages     = {570 -- 577},
  year      = {2016},
  language  = {en}
}
@article{BungErpicumTullis2020,
  author    = {Bung, Daniel Bernhard and Erpicum, S{\´e}bastien and Tullis, Blanke P.},
  title     = {Advances in hydraulic structures engineering},
  series = {Journal of Hydraulic Engineering},
  volume    = {147},
  journal   = {Journal of Hydraulic Engineering},
  number    = {1},
  publisher = {ASCE},
  address   = {Reston, Va.},
  issn      = {0733-9429 (Druckausgabe)},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001851},
  pages     = {1 Seite},
  year      = {2020},
  language  = {en}
}
@article{DesernoAachAmuntsetal.2011,
  author    = {Deserno, Thomas M. and Aach, Til and Amunts, Katrin and Hillen, Walter and Kuhlen, Torsten and Scholl, Ingrid},
  title     = {Advances in medical image processing : A special Issue on the Workshop in Aachen, Germany, March 2010},
  series = {Computer Science - Research and Development. 26 (2011), H. 1-2},
  journal   = {Computer Science - Research and Development. 26 (2011), H. 1-2},
  publisher = {springer},
  address   = {Berlin},
  isbn      = {1865-2042},
  pages     = {1 -- 3},
  year      = {2011},
  language  = {en}
}
@article{HartungNiebertSchiederetal.2006,
  author    = {Hartung, Frank and Niebert, Norbert and Schieder, Andreas and Rembarz, Ren{\´e}},
  title     = {Advances in network-supported media delivery in next-generation mobile systems / Hartung, Frank ; Niebert, Norbert ; Schieder, Andreas ; Rembarz, Ren{\´e} ; Schmid, Stefan ; Eggert, Lars},
  series = {IEEE Communications Magazine. 44 (2006), H. 8},
  journal   = {IEEE Communications Magazine. 44 (2006), H. 8},
  isbn      = {0163-6804},
  pages     = {82 -- 89},
  year      = {2006},
  language  = {en}
}
@inproceedings{OttenSchmidWeber2015,
  author    = {Otten, D. and Schmid, M. and Weber, Tobias},
  title     = {Advances In Sheet Metal-Forming: Reduction Of Tooling Cost By Methodical Optimization},
  series = {Proceedings of SAMPE Europe Conference, Amiens , France},
  booktitle = {Proceedings of SAMPE Europe Conference, Amiens , France},
  year      = {2015},
  language  = {en}
}
@article{AlexopoulosHoffschmidt2017,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Advances in solar tower technology},
  series = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  volume    = {6},
  journal   = {Wiley interdisciplinary reviews : Energy and Environment : WIREs},
  number    = {1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2041-840X},
  doi       = {10.1002/wene.217},
  pages     = {1 -- 19},
  year      = {2017},
  language  = {en}
}
@article{HendersonScheerWolf2009,
  author    = {Henderson, Colin J. and Scheer, Nico and Wolf, C. Roland},
  title     = {Advances in the generation of mouse models to elucidate the pathways of drug metabolism in rodents and man},
  series = {Expert Review of Clinical Pharmacology},
  volume    = {2},
  journal   = {Expert Review of Clinical Pharmacology},
  number    = {2},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1751-2441},
  doi       = {10.1586/17512433.2.2.105},
  pages     = {105 -- 109},
  year      = {2009},
  language  = {en}
}
@article{MandekarHollandThielenetal.2022,
  author    = {Mandekar, Swati and Holland, Abigail and Thielen, Moritz and Behbahani, Mehdi and Melnykowycz, Mark},
  title     = {Advancing towards Ubiquitous EEG, Correlation of In-Ear EEG with Forehead EEG},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22041568},
  pages     = {1 -- 19},
  year      = {2022},
  abstract  = {Wearable EEG has gained popularity in recent years driven by promising uses outside of clinics and research. The ubiquitous application of continuous EEG requires unobtrusive form-factors that are easily acceptable by the end-users. In this progression, wearable EEG systems have been moving from full scalp to forehead and recently to the ear. The aim of this study is to demonstrate that emerging ear-EEG provides similar impedance and signal properties as established forehead EEG. EEG data using eyes-open and closed alpha paradigm were acquired from ten healthy subjects using generic earpieces fitted with three custom-made electrodes and a forehead electrode (at Fpx) after impedance analysis. Inter-subject variability in in-ear electrode impedance ranged from 20 kΩ to 25 kΩ at 10 Hz. Signal quality was comparable with an SNR of 6 for in-ear and 8 for forehead electrodes. Alpha attenuation was significant during the eyes-open condition in all in-ear electrodes, and it followed the structure of power spectral density plots of forehead electrodes, with the Pearson correlation coefficient of 0.92 between in-ear locations ELE (Left Ear Superior) and ERE (Right Ear Superior) and forehead locations, Fp1 and Fp2, respectively. The results indicate that in-ear EEG is an unobtrusive alternative in terms of impedance, signal properties and information content to established forehead EEG.},
  language  = {en}
}
@article{MuellerJungAhammer2017,
  author    = {M{\"u}ller, Wolfram and Jung, Alexander and Ahammer, Helmut},
  title     = {Advantages and problems of nonlinear methods applied to analyze physiological time signals: human balance control as an example},
  series = {Scientific Reports},
  volume    = {7},
  journal   = {Scientific Reports},
  number    = {Article number 2464},
  publisher = {Springer Nature},
  address   = {Cham},
  isbn      = {2045-2322},
  doi       = {10.1038/s41598-017-02665-5},
  pages     = {1 -- 11},
  year      = {2017},
  language  = {en}
}
@article{AkimbekovDigelZhubanova2014,
  author    = {Akimbekov, N. Sh. and Digel, Ilya and Zhubanova, A. A.},
  title     = {Advantages of creation of e-books in training of specialists biologists and biotechnologists},
  series = {KazNU Bulletin. Biology series.},
  volume    = {60},
  journal   = {KazNU Bulletin. Biology series.},
  number    = {1},
  publisher = {Al-Farabi Kazakh National University},
  address   = {Almaty},
  issn      = {1563-0218},
  pages     = {249 -- 252},
  year      = {2014},
  abstract  = {The necessity of e-books as a primary of learning, its opportunities for realization of competence during training biologist and biotechnologist specialists are determined. Definitions and requirements to the e-books, its advantages in comparison with traditional textbooks, and the ways of creation of e-books in the SunRav BookEditor program are considered.},
  language  = {ru}
}
@inproceedings{GeibenGoettenHavermann2020,
  author    = {Geiben, Benedikt and G{\"o}tten, Falk and Havermann, Marc},
  title     = {Aerodynamic analysis of a winged sub-orbital spaceplane},
  series = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  booktitle = {Deutscher Luft- und Raumfahrtkongress - DLRK 2020},
  year      = {2020},
  language  = {en}
}
@article{GoettenHavermannBraunetal.2021,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Aerodynamic Investigations of UAV Sensor Turrets - A Combined Wind-tunnel and CFD Approach},
  series = {SciTech 2021, AIAA SciTech Forum, online, WW, Jan 11-15, 2021},
  journal   = {SciTech 2021, AIAA SciTech Forum, online, WW, Jan 11-15, 2021},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2021-1535},
  pages     = {1 -- 12},
  year      = {2021},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Aerodynamic multi point design challenge},
  series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_4},
  pages     = {53 -- 67},
  year      = {1997},
  abstract  = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.},
  language  = {en}
}
@article{GerhardtKonrathKrameretal.1992,
  author    = {Gerhardt, Hans Joachim and Konrath, B. and Kramer, C. and Oliveira, L.-A.},
  title     = {Aerodynamische Abdichtung von Anlagen f{\"u}r die Bandbearbeitung},
  series = {Blech, Rohre, Profile. 39 (1992), H. 1},
  journal   = {Blech, Rohre, Profile. 39 (1992), H. 1},
  isbn      = {0006-4688},
  pages     = {39 -- 1},
  year      = {1992},
  language  = {de}
}
@techreport{ReimerWellmerBraunetal.2007,
  author    = {Reimer, Lars and Wellmer, Georg and Braun, Carsten and Ballmann, Josef},
  title     = {Aerodynamische Simulation und Optimierung in der Flugzeugentwicklung. Teilvorhabenbezeichnung: Aerodynamische Optimierung unter Ber{\"u}cksichtigung von Struktureigenschaften auf der Basis reduzierter Strukturmodelle, Verbundvorhaben MEGADESIGN. Schlussbericht. Berichtszeitraum: 01.06.2003-31.05.2007. BMBF-Forschungsbericht},
  pages     = {41 S.: Ill., graph. Darst.},
  year      = {2007},
  language  = {de}
}
@article{Mertens1998,
  author    = {Mertens, Josef},
  title     = {Aerodynamische Ziele des Adaptiven Fl{\"u}gels (ADIF).},
  series = {DGLR-Jahrbuch 1998 Bd. 1},
  journal   = {DGLR-Jahrbuch 1998 Bd. 1},
  pages     = {47 -- 52},
  year      = {1998},
  language  = {de}
}
@article{GerhardtKramer1985,
  author    = {Gerhardt, Hans Joachim and Kramer, C.},
  title     = {Aerodynamsiche RA-Optimierung},
  series = {Zentralblatt fuer Industriebau. 31 (1985), H. 5},
  journal   = {Zentralblatt fuer Industriebau. 31 (1985), H. 5},
  isbn      = {0044-4227},
  pages     = {358 -- 362},
  year      = {1985},
  language  = {en}
}
@incollection{BallmannBouckeBraun2003,
  author    = {Ballmann, Josef and Boucke, Alexander and Braun, Carsten},
  title     = {Aeroelastic sensitivity in the transonic regime},
  series = {Symposium Transsonicum IV : proceedings of the IUTAM symposium held in G{\"o}ttingen, Germany, 2 - 6 September 2002 / ed. by Helmut Sobieczky. Fluid mechanics and its applications. Vol. 73},
  booktitle = {Symposium Transsonicum IV : proceedings of the IUTAM symposium held in G{\"o}ttingen, Germany, 2 - 6 September 2002 / ed. by Helmut Sobieczky. Fluid mechanics and its applications. Vol. 73},
  publisher = {Kluwer Academic},
  address   = {Dordrecht},
  isbn      = {978-94-010-3998-7},
  pages     = {225 -- 236},
  year      = {2003},
  language  = {en}
}
@article{EngelmannBuhlBaumannetal.2017,
  author    = {Engelmann, Ulrich M. and Buhl, Eva Miriam and Baumann, Martin and Schmitz-Rode, Thomas and Slabu, Ioana},
  title     = {Agglomeration of magnetic nanoparticles and its effects on magnetic hyperthermia},
  series = {Current Directions in Biomedical Engineering},
  volume    = {3},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {2},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2364-5504},
  doi       = {10.1515/cdbme-2017-0096},
  pages     = {457 -- 460},
  year      = {2017},
  language  = {en}
}
@article{SponagelLutz1990,
  author    = {Sponagel, Stefan and Lutz, T.},
  title     = {Aggregatelager},
  series = {Kautschuk Gummi Kunststoffe. 43 (1990), H. 5},
  journal   = {Kautschuk Gummi Kunststoffe. 43 (1990), H. 5},
  isbn      = {0022-9520},
  pages     = {397 -- 406},
  year      = {1990},
  language  = {de}
}
@article{MoratFaudeHanssenetal.2020,
  author    = {Morat, Mareike and Faude, Oliver and Hanssen, Henner and Ludyga, Sebastian and Zacher, Jonas and Eibl, Angi and Albracht, Kirsten and Donath, Lars},
  title     = {Agility Training to Integratively Promote Neuromuscular, Cognitive, Cardiovascular and Psychosocial Function in Healthy Older Adults: A Study Protocol of a One-Year Randomized-Controlled Trial},
  series = {International Journal of Environmental Research and Public Health},
  volume    = {17},
  journal   = {International Journal of Environmental Research and Public Health},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1660-4601},
  doi       = {10.3390/ijerph17061853},
  pages     = {1 -- 14},
  year      = {2020},
  abstract  = {Exercise training effectively mitigates aging-induced health and fitness impairments. Traditional training recommendations for the elderly focus separately on relevant physiological fitness domains, such as balance, flexibility, strength and endurance. Thus, a more holistic and functional training framework is needed. The proposed agility training concept integratively tackles spatial orientation, stop and go, balance and strength. The presented protocol aims at introducing a two-armed, one-year randomized controlled trial, evaluating the effects of this concept on neuromuscular, cardiovascular, cognitive and psychosocial health outcomes in healthy older adults. Eighty-five participants were enrolled in this ongoing trial. Seventy-nine participants completed baseline testing and were block-randomized to the agility training group or the inactive control group. All participants undergo pre- and post-testing with interim assessment after six months. The intervention group currently receives supervised, group-based agility training twice a week over one year, with progressively demanding perceptual, cognitive and physical exercises. Knee extension strength, reactive balance, dual task gait speed and the Agility Challenge for the Elderly (ACE) serve as primary endpoints and neuromuscular, cognitive, cardiovascular, and psychosocial meassures serve as surrogate secondary outcomes. Our protocol promotes a comprehensive exercise training concept for older adults, that might facilitate stakeholders in health and exercise to stimulate relevant health outcomes without relying on excessively time-consuming physical activity recommendations.},
  language  = {en}
}
@article{Jacobs2010,
  author    = {Jacobs, Stephan},
  title     = {Agilit{\"a}t in Großprojekten durch „Integration Driven Design" : ein Erfahrungsbericht},
  series = {Softwaretechnik-Trends (STT)},
  volume    = {30},
  journal   = {Softwaretechnik-Trends (STT)},
  number    = {3},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  issn      = {0720-8928},
  pages     = {4 Seiten},
  year      = {2010},
  abstract  = {Der folgende Bericht fasst Erfahrungen zusammen, die in großen Entwicklungsprojekten der Firma Ericsson {\"u}ber mehrere Jahre gesammelt wurden. Ziel war dabei nicht, agile Methoden und Techniken einzusetzen - Agilit{\"a}t war zu der Zeit noch kein Hype-Thema. Vielmehr wurden Schw{\"a}chen in den eigenen Projekten identifiziert und verbessert. Der Erfahrungsbericht vergleicht Verbesserungen in diesen Projekten mit den Ans{\"a}tzen der agilen Entwicklung. Als Ergebnis werden folgende Punkte festgehalten: Erstens, einige Praktiken und Werte der agilen Entwicklung lassen sich auch in Großprojekten einsetzen. Zweitens, bei der Skalierung f{\"u}r Großprojekte werden diese Praktiken langsamer getaktet. Drittens, agile Entwicklung ist nicht nur eine Reihe von Praktiken und Werten, agile Entwicklung ist vielmehr auch eine Frage der Entwicklungs- und Projektkultur. Diese kulturelle {\"A}nderung l{\"a}sst sich in Großprojekten deutlich langsamer umsetzen.},
  language  = {de}
}
@inproceedings{MarcoFerrein2017,
  author    = {Marco, Heather G. and Ferrein, Alexander},
  title     = {AGNES: The African-German Network of Excellence in Science},
  series = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  booktitle = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {en}
}
@incollection{FreyerKempt2023,
  author    = {Freyer, Nils and Kempt, Hendrik},
  title     = {AI-DSS in healthcare and their power over health-insecure collectives},
  series = {Justice in global health},
  booktitle = {Justice in global health},
  editor    = {Bhakuni, Himani and Miotto, Lucas},
  publisher = {Routledge},
  address   = {London},
  isbn      = {9781003399933},
  doi       = {10.4324/9781003399933-4},
  pages     = {38 -- 55},
  year      = {2023},
  abstract  = {AI-based systems are nearing ubiquity not only in everyday low-stakes activities but also in medical procedures. To protect patients and physicians alike, explainability requirements have been proposed for the operation of AI-based decision support systems (AI-DSS), which adds hurdles to the productive use of AI in clinical contexts. This raises two questions: Who decides these requirements? And how should access to AI-DSS be provided to communities that reject these standards (particularly when such communities are expert-scarce)? This chapter investigates a dilemma that emerges from the implementation of global AI governance. While rejecting global AI governance limits the ability to help communities in need, global AI governance risks undermining and subjecting health-insecure communities to the force of the neo-colonial world order. For this, this chapter first surveys the current landscape of AI governance and introduces the approach of relational egalitarianism as key to (global health) justice. To discuss the two horns of the referred dilemma, the core power imbalances faced by health-insecure collectives (HICs) are examined. The chapter argues that only strong demands of a dual strategy towards health-secure collectives can both remedy the immediate needs of HICs and enable them to become healthcare independent.},
  language  = {en}
}
@article{ElbersPfefferFrieseletal.1995,
  author    = {Elbers, Gereon and Pfeffer, Hans-Ulrich and Friesel, J{\"u}rgen and Beier, Reinhold},
  title     = {Air Pollution Monitoring in Street Canyons / Hans-Ulrich Pfeffer, J{\"u}rgen Friesel, Gereon Elbers, Reinhold Beier,},
  series = {Transport and air pollution : proceedings ; 3rd international symposium, Palais des Papes, Avignon, France, 6 - 10 June 1994 = Transports et pollution de l'air / [Third International Symposium on Transport and Air Pollution]. Ed. by Robert Joumard. Organizer: French National Institute for Transport and Safety Research},
  journal   = {Transport and air pollution : proceedings ; 3rd international symposium, Palais des Papes, Avignon, France, 6 - 10 June 1994 = Transports et pollution de l'air / [Third International Symposium on Transport and Air Pollution]. Ed. by Robert Joumard. Organizer: French National Institute for Transport and Safety Research},
  publisher = {Elsevier},
  address   = {Amsterdam},
  pages     = {IX, 337 S : graph. Darst.},
  year      = {1995},
  language  = {en}
}
@article{BohrnStuetzFuchsetal.2011,
  author    = {Bohrn, U. and St{\"u}tz, E. and Fuchs, K. and Fleischer, M. and Sch{\"o}ning, Michael Josef and Wagner, P.},
  title     = {Air Quality Monitoring using a Whole-Cell based Sensor System},
  series = {Procedia Engineering. 25 (2011)},
  journal   = {Procedia Engineering. 25 (2011)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1877-7058},
  pages     = {1421 -- 1424},
  year      = {2011},
  language  = {en}
}
@article{MikielewiczKotliarBarraqueretal.2011,
  author    = {Mikielewicz, Marek and Kotliar, Konstantin and Barraquer, Rafael I. and Michael, Ralph},
  title     = {Air-pulse corneal applanation signal curve parameters for the characterisation of keratoconus},
  series = {British Journal of Ophthalmology (eBJO)},
  volume    = {95},
  journal   = {British Journal of Ophthalmology (eBJO)},
  number    = {6},
  publisher = {BMJ Publ. Group},
  address   = {London},
  issn      = {1468-2079},
  pages     = {793 -- 798},
  year      = {2011},
  language  = {en}
}
@inproceedings{BaumannTeixeiraBouraEcksteinetal.2011,
  author    = {Baumann, Torsten and Teixeira Boura, Cristiano Jos{\´e} and Eckstein, Julian and Felinks, Jan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Zunft, Stefan},
  title     = {Air-sand heat exchanger},
  series = {6th International Renewable Energy Storage Conference (IRES 2011) : November 28 - 30, 2011, bcc Berlin Congress Center, Berlin, Germany / EUROSOLAR ...},
  booktitle = {6th International Renewable Energy Storage Conference (IRES 2011) : November 28 - 30, 2011, bcc Berlin Congress Center, Berlin, Germany / EUROSOLAR ...},
  publisher = {Eurosolar},
  address   = {Bonn},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {de}
}
@article{WarerkarSchmitzGoettscheetal.2011,
  author    = {Warerkar, Shashikant and Schmitz, Stefan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Reißel, Martin and Tamme, Rainer},
  title     = {Air-Sand Heat Exchanger for High-Temperature Storage},
  series = {Journal of Solar Energy Engineering. 133 (2011), H. 2},
  journal   = {Journal of Solar Energy Engineering. 133 (2011), H. 2},
  publisher = {ASME},
  address   = {New York},
  isbn      = {0199-6231},
  pages     = {021010},
  year      = {2011},
  language  = {en}
}
@inproceedings{WarerkarSchmitzGoettscheetal.2009,
  author    = {Warerkar, Shashikant and Schmitz, Stefan and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Reißel, Martin and Tamme, Rainer},
  title     = {Air-sand heat exchanger for high-temperature storage},
  series = {Proceedings of the ASME 3rd International Conference on Energy Sustainability : July 19 - 23, 2009, San Francisco, California, USA. Vol. 2},
  booktitle = {Proceedings of the ASME 3rd International Conference on Energy Sustainability : July 19 - 23, 2009, San Francisco, California, USA. Vol. 2},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-4890-6},
  pages     = {655 -- 661},
  year      = {2009},
  language  = {en}
}
@inproceedings{BaumannTeixeiraBouraGoettscheetal.2011,
  author    = {Baumann, Torsten and Teixeira Boura, Cristiano Jos{\´e} and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and Schmitz, Stefan and Zunft, Stefan},
  title     = {Air-sand heat exchanger: materials and flow properties},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}
@inproceedings{Bung2013,
  author    = {Bung, Daniel B.},
  title     = {Air-water surface roughness in self-aerated stepped spillway flows},
  series = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11045},
  year      = {2013},
  language  = {en}
}
@inproceedings{BaumannTeixeiraBouraGoettscheetal.2010,
  author    = {Baumann, T. and Teixeira Boura, Cristiano Jos{\´e} and G{\"o}ttsche, Joachim and Hoffschmidt, Bernhard and O'Connell, B. and Schmitz, S. and Zunft, S.},
  title     = {Air/Sand heat exchanger design and materials for solar thermal power plant applications},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {146 -- 147},
  year      = {2010},
  language  = {en}
}
@article{GronsfeldSparlaWeinnhold2010,
  author    = {Gronsfeld, Richard and Sparla, Peter and Weinnhold, Wolfgang},
  title     = {Airborne und terrestrisches Laserscanning - neue Tools f{\"u}r den Talsperrenbetreiber?},
  series = {Wasserwirtschaft},
  volume    = {100},
  journal   = {Wasserwirtschaft},
  number    = {4},
  isbn      = {0043-0978},
  pages     = {80 -- 82},
  year      = {2010},
  language  = {de}
}
@article{GoettenHavermannBraunetal.2020,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Marino, Matthew and Bil, Cees},
  title     = {Airfoil drag at low-to-medium reynolds numbers: A novel estimation method},
  series = {AIAA Journal},
  volume    = {58},
  journal   = {AIAA Journal},
  number    = {7},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {1533-385X},
  doi       = {10.2514/1.J058983},
  pages     = {2791 -- 2805},
  year      = {2020},
  abstract  = {This paper presents a novel method for airfoil drag estimation at Reynolds numbers between 4×10⁵ and 4×10⁶. The novel method is based on a systematic study of 40 airfoils applying over 600 numerical simulations and considering natural transition. The influence of the airfoil thickness-to-chord ratio, camber, and freestream Reynolds number on both friction and pressure drag is analyzed in detail. Natural transition significantly affects drag characteristics and leads to distinct drag minima for different Reynolds numbers and thickness-to-chord ratios. The results of the systematic study are used to develop empirical correlations that can accurately predict an airfoil drag at low-lift conditions. The new approach estimates a transition location based on airfoil thickness-to-chord ratio, camber, and Reynolds number. It uses the transition location in a mixed laminar-turbulent skin-friction calculation, and corrects the skin-friction coefficient for separation effects. Pressure drag is estimated separately based on correlations of thickness-to-chord ratio, camber, and Reynolds number. The novel method shows excellent accuracy when compared with wind-tunnel measurements of multiple airfoils. It is easily integrable into existing aircraft design environments and is highly beneficial in the conceptual design stage.},
  language  = {en}
}
@inproceedings{GligorevicZierhutJostetal.2009,
  author    = {Gligorevic, Snjezana and Zierhut, R. and Jost, T. and Wang, Wei},
  title     = {Airport channel measurements at 5.2GHz},
  series = {3rd European Conference on Antennas and Propagation : (EuCAP) ; Berlin, Germany, 23 - 27 March 2009},
  booktitle = {3rd European Conference on Antennas and Propagation : (EuCAP) ; Berlin, Germany, 23 - 27 March 2009},
  organization    = {European Conference on Antennas and Propagation <3, 2009, Berlin>},
  isbn      = {978-1-4244-4753-4 ; 978-3-00-024573-2},
  pages     = {877 -- 881},
  year      = {2009},
  language  = {en}
}
@article{Gligorevic2013,
  author    = {Gligorevic, Snjezana},
  title     = {Airport surface propagation channel in the C-Band: measurements and modeling},
  series = {IEEE transactions on antennas and propagation},
  volume    = {Vol. 61},
  journal   = {IEEE transactions on antennas and propagation},
  number    = {Iss. 9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0018-926x},
  pages     = {4792 -- 4802},
  year      = {2013},
  language  = {en}
}
@article{DoeringKuhnhenneHellbergetal.2008,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Hellberg, Jan and Feldmann, Markus},
  title     = {Aktive und passive Temperierung eines Stahldeckensystems : numerische und messtechnische Untersuchungen. T. 1},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 59},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 10},
  issn      = {1436-5103, 0017-9906, 1434-422X, 1436-5103},
  pages     = {54 -- 60},
  year      = {2008},
  language  = {de}
}
@article{DoeringKuhnhenneHellbergetal.2008,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Hellberg, Jan and Feldmann, Markus},
  title     = {Aktive und passive Temperierung eines Stahldeckensystems : thermische Bauteilaktivierung : numerische und messtechnische Untersuchungen. T. 2.},
  series = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 59},
  journal   = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 11},
  issn      = {1436-5103},
  pages     = {37 -- 41},
  year      = {2008},
  language  = {de}
}
@article{Wessling2008,
  author    = {Weßling, Matthias},
  title     = {Aktives Nachfolger-Coaching f{\"u}r den Mittelstand setzt fr{\"u}h an. Innovative Idee f{\"u}r Studierende der FH Aachen},
  series = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen / IHK (2008)},
  journal   = {Wirtschaftliche Nachrichten der Industrie- und Handelskammer Aachen / IHK (2008)},
  pages     = {12 -- 13},
  year      = {2008},
  language  = {de}
}
@article{Meliss1997,
  author    = {Meliß, Michael},
  title     = {Aktuelle Aspekte der Windkraftnutzung},
  series = {Energiewirtschaftliche Tagesfragen. Jg. 47 (1997), H. 9},
  journal   = {Energiewirtschaftliche Tagesfragen. Jg. 47 (1997), H. 9},
  issn      = {0013-743X},
  pages     = {531 -- 532},
  year      = {1997},
  language  = {de}
}
@article{Heger1994,
  author    = {Heger, Michael},
  title     = {Aktuelle Einsch{\"a}tzungen zur Evaluation universit{\"a}rer Lehre},
  series = {Feedback versus Evaluation. Bd. 3 : Gesetzliche Verankerung und Modellvorschl{\"a}ge zur Weiterentwicklung},
  journal   = {Feedback versus Evaluation. Bd. 3 : Gesetzliche Verankerung und Modellvorschl{\"a}ge zur Weiterentwicklung},
  publisher = {{\"O}sterreichischer Studien-Verl.},
  address   = {Innsbruck},
  pages     = {384 -- 387},
  year      = {1994},
  language  = {de}
}
@article{BaumannPeschel1998,
  author    = {Baumann, Marcus and Peschel, G.},
  title     = {Aktuelle Entwicklungen zur Luftreinhaltung in der Stadt Aachen},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {20},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {91},
  issn      = {0172-1623},
  pages     = {22 -- 29},
  year      = {1998},
  language  = {de}
}
@article{Timme2003,
  author    = {Timme, Michael},
  title     = {Aktuelle Entwicklungen zur Zul{\"a}ssigkeit der B{\"u}rgschaft auf erstes Anfordern},
  series = {Monatsschrift f{\"u}r deutsches Recht : MDR. 23 (2003), H. 19},
  journal   = {Monatsschrift f{\"u}r deutsches Recht : MDR. 23 (2003), H. 19},
  isbn      = {0340-1812},
  pages     = {1094 -- 1097},
  year      = {2003},
  language  = {de}
}
@incollection{Doeren1998,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Aktuelle Fragen zur Schweißmetallurgie. Neue Werkstoffe und ihre schweißtechnische Verarbeitung = Current questions on welding metallurgy},
  series = {Jahrbuch Schweißtechnik '99},
  booktitle = {Jahrbuch Schweißtechnik '99},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-745-5},
  pages     = {77 -- 85},
  year      = {1998},
  language  = {de}
}
@incollection{MeskourisNordaButenweg2011,
  author    = {Meskouris, Konstantin and Norda, Hannah and Butenweg, Christoph},
  title     = {Aktuelle Nachweiskonzepte von Mauerwerk unter Erdbebenbeanspruchung},
  series = {Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram J{\"a}ger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)},
  booktitle = {Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram J{\"a}ger, Dresden, 19.04.2011. (Bauforschung und Baupraxis ; H. 10)},
  publisher = {Techn. Univ., Lehrstuhl Tragwerksplanung},
  address   = {Dresden},
  isbn      = {978-3-86780-216-1},
  pages     = {233 -- 238},
  year      = {2011},
  language  = {de}
}
@inproceedings{MeskourisButenweg2005,
  author    = {Meskouris, Konstantin and Butenweg, Christoph},
  title     = {Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik : D-A-CH-Tagung 2005 in K{\"o}ln / K. Meskouris, Chr. Butenweg (Hrsg.). Organisiert von der Deutschen Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik.},
  series = {DGEB-Publikation ; 13},
  booktitle = {DGEB-Publikation ; 13},
  publisher = {DGEB},
  address   = {Aachen},
  organization    = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik},
  isbn      = {3-930108-09-7},
  pages     = {V, 144 S.},
  year      = {2005},
  language  = {de}
}
@article{Gebhardt1997,
  author    = {Gebhardt, Andreas},
  title     = {Aktuelle Trends bei RP und RT},
  series = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  journal   = {Kunststoffe, M{\"u}nchen. 87 (1997), H. 1},
  isbn      = {0023-5563},
  pages     = {27 -- 30},
  year      = {1997},
  language  = {de}
}
@article{ScheibeKern2011,
  author    = {Scheibe, Klaus and Kern, Alexander},
  title     = {Aktueller Stand der Normung zum {\"U}berspannungschutz},
  series = {9. VDE/ABB-Blitzschutztagung : Vortr{\"a}ge der 9. VDE/ABB-Fachtagung vom 27. bis 28. Oktober 2011 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. Wiss. Tagungsleitung: K. Stimper},
  journal   = {9. VDE/ABB-Blitzschutztagung : Vortr{\"a}ge der 9. VDE/ABB-Fachtagung vom 27. bis 28. Oktober 2011 in Neu-Ulm / Veranst.: Ausschuss f{\"u}r Blitzschutz und Blitzforschung (ABB) im VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. Wiss. Tagungsleitung: K. Stimper},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3380-4},
  pages     = {13 -- 17},
  year      = {2011},
  language  = {de}
}
@article{Kern2000,
  author    = {Kern, Alexander},
  title     = {Aktueller Stand zu Risikoabsch{\"a}tzungen bei Blitzeinschl{\"a}gen - Was ist neu in der IEC 61662 Edition 2?},
  year      = {2000},
  language  = {de}
}
@article{KernHasseWiesingeretal.1991,
  author    = {Kern, Alexander and Hasse, P. and Wiesinger, J. and Zischank, Wolfgang J.},
  title     = {Aktuelles aus der Blitzforschung},
  series = {ETZ : Elektrotechnik + Automation. 112 (1991), H. 1},
  journal   = {ETZ : Elektrotechnik + Automation. 112 (1991), H. 1},
  isbn      = {0170-1711},
  year      = {1991},
  language  = {de}
}
@book{Hagemann1980,
  author    = {Hagemann, Hans-J{\"u}rgen},
  title     = {Akzeptorionen in BaTiO3 und SrTiO3 und ihre Auswirkungen auf die Eigenschaften von Titanatkeramiken},
  pages     = {IX, 145 S. : zahlr. graph. Darst.},
  year      = {1980},
  language  = {de}
}
@article{WaltherGerthsenCariusetal.1993,
  author    = {Walther, T. and Gerthsen, D. and Carius, Reinhard and F{\"o}rster, Arnold},
  title     = {AlAs/GaAs Quantum well structures: Interface properties investigated by high-resolution transmission electron microscopy and photoluminescence spectroscopy / T. Walther ; D. Gerthsen ; R. Carius ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134)},
  journal   = {Microscopy of semiconducting materials 1993 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 5 - 8 April 1993 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 134)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0290-9},
  pages     = {449 -- ff.},
  year      = {1993},
  language  = {en}
}
@article{RoeschKratzHeringetal.2016,
  author    = {R{\"o}sch, C. and Kratz, F. and Hering, T. and Trautmann, S. and Umanskaya, N. and Tippk{\"o}tter, Nils and M{\"u}ller-Renno, C.M. and Ulber, R. and Hannig, M. and Ziegler, C.},
  title     = {Albumin-lysozyme interactions: cooperative adsorption on titanium and enzymatic activity},
  series = {Colloids and Surfaces B: Biointerfaces},
  volume    = {149},
  journal   = {Colloids and Surfaces B: Biointerfaces},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.colsurfb.2016.09.048},
  pages     = {115 -- 121},
  year      = {2016},
  abstract  = {The interplay of albumin (BSA) and lysozyme (LYZ) adsorbed simultaneously on titanium was analyzed by gel electrophoresis and BCA assay. It was found that BSA and lysozyme adsorb cooperatively. Additionally, the isoelectric point of the respective protein influences the adsorption. Also, the enzymatic activity of lysozyme and amylase (AMY) in mixtures with BSA was considered with respect to a possible influence of protein-protein interaction on enzyme activity. Indeed, an increase of lysozyme activity in the presence of BSA could be observed. In contrast, BSA does not influence the activity of amylase.},
  language  = {en}
}
@inproceedings{KohlFreyerKraemeretal.2023,
  author    = {Kohl, Philipp and Freyer, Nils and Kr{\"a}mer, Yoka and Werth, Henri and Wolf, Steffen and Kraft, Bodo and Meinecke, Matthias and Z{\"u}ndorf, Albert},
  title     = {ALE: a simulation-based active learning evaluation framework for the parameter-driven comparison of query strategies for NLP},
  series = {Deep Learning Theory and Applications. DeLTA 2023. Communications in Computer and Information Science},
  booktitle = {Deep Learning Theory and Applications. DeLTA 2023. Communications in Computer and Information Science},
  editor    = {Conte, Donatello and Fred, Ana and Gusikhin, Oleg and Sansone, Carlo},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-39058-6 (Print)},
  doi       = {978-3-031-39059-3},
  pages     = {235 -- 253},
  year      = {2023},
  abstract  = {Supervised machine learning and deep learning require a large amount of labeled data, which data scientists obtain in a manual, and time-consuming annotation process. To mitigate this challenge, Active Learning (AL) proposes promising data points to annotators they annotate next instead of a subsequent or random sample. This method is supposed to save annotation effort while maintaining model performance. However, practitioners face many AL strategies for different tasks and need an empirical basis to choose between them. Surveys categorize AL strategies into taxonomies without performance indications. Presentations of novel AL strategies compare the performance to a small subset of strategies. Our contribution addresses the empirical basis by introducing a reproducible active learning evaluation (ALE) framework for the comparative evaluation of AL strategies in NLP. The framework allows the implementation of AL strategies with low effort and a fair data-driven comparison through defining and tracking experiment parameters (e.g., initial dataset size, number of data points per query step, and the budget). ALE helps practitioners to make more informed decisions, and researchers can focus on developing new, effective AL strategies and deriving best practices for specific use cases. With best practices, practitioners can lower their annotation costs. We present a case study to illustrate how to use the framework.},
  language  = {en}
}
@article{FoersterLauterLueth1996,
  author    = {F{\"o}rster, Arnold and Lauter, J. and L{\"u}th, H.},
  title     = {AlGaAs/GaAs avalanche detector array -1 GBit/s X-ray receiver for timing measurements / J. Lauter ; A. F{\"o}rster ; H. L{\"u}th ...},
  series = {1995 IEEE conference record : October 21 - 28, 1995, San Francisco / Patricia A. Moonier, guest ed. - Vol. 1},
  journal   = {1995 IEEE conference record : October 21 - 28, 1995, San Francisco / Patricia A. Moonier, guest ed. - Vol. 1},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3180-X},
  pages     = {579 -- ff.},
  year      = {1996},
  language  = {en}
}
@article{FoersterLauterLueth1996,
  author    = {F{\"o}rster, Arnold and Lauter, J. and L{\"u}th, H.},
  title     = {AlGaAs/GaAs avalanche detector array-1 GBit/s X-ray receiver fortiming measurements / J. Lauter ; A. F{\"o}rster ; H. L{\"u}th ...},
  series = {IEEE Transactions on Nuclear Science (T-NS). 43 (1996), H. 3, Part 2},
  journal   = {IEEE Transactions on Nuclear Science (T-NS). 43 (1996), H. 3, Part 2},
  isbn      = {0018-9499},
  pages     = {1446 -- 1451},
  year      = {1996},
  language  = {en}
}
@article{FoersterLauterProticetal.1995,
  author    = {F{\"o}rster, Arnold and Lauter, J. and Protic, D. and L{\"u}th, H.},
  title     = {AlGaAs/GaAs SAM-avalanche photodiode : an X-ray detector for low energy photons / J. Lauter ; D. Protic ; A. F{\"o}rster ; H. L{\"u}th},
  series = {Nuclear instruments and methods in physics research section A: Accelerators, spectrometers, detectors and associated equipment. 356 (1995), H. 2-3},
  journal   = {Nuclear instruments and methods in physics research section A: Accelerators, spectrometers, detectors and associated equipment. 356 (1995), H. 2-3},
  isbn      = {0168-9002},
  pages     = {324 -- 329},
  year      = {1995},
  language  = {en}
}
@article{Maurischat2022,
  author    = {Maurischat, Andreas},
  title     = {Algebraic independence of the Carlitz period and its hyperderivatives},
  series = {Journal of Number Theory},
  volume    = {240},
  journal   = {Journal of Number Theory},
  publisher = {Elsevier},
  address   = {Orlando, Fla.},
  issn      = {0022-314X},
  doi       = {10.1016/j.jnt.2022.01.006},
  pages     = {145 -- 162},
  year      = {2022},
  language  = {en}
}
@article{Maurischat2021,
  author    = {Maurischat, Andreas},
  title     = {Algebraic independence of the Carlitz period and its hyperderivatives},
  pages     = {1 -- 12},
  year      = {2021},
  language  = {en}
}
@article{Baumann1996,
  author    = {Baumann, Marcus},
  title     = {Algenbl{\"u}ten \& Treibhauseffekt : Wechselwirkungen mit anthropogenen Aktivit{\"a}ten},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {18},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {81},
  issn      = {0172-1623},
  pages     = {6 -- 11},
  year      = {1996},
  language  = {de}
}
@article{KraftHeerRetkowitz2008,
  author    = {Kraft, Bodo and Heer, Thomas and Retkowitz, Daniel},
  title     = {Algorithm and Tool for Ontology Integration Based on Graph Rewriting / Heer, Thomas ; Retkowitz, Daniel ; Kraft, Bodo},
  series = {Applications of Graph Transformations with Industrial Relevance / Third International Symposium, AGTIVE 2007, Kassel, Germany, October 10-12, 2007, Revised Selected and Invited Papers},
  journal   = {Applications of Graph Transformations with Industrial Relevance / Third International Symposium, AGTIVE 2007, Kassel, Germany, October 10-12, 2007, Revised Selected and Invited Papers},
  isbn      = {978-3-540-89019-5},
  pages     = {577 -- 582},
  year      = {2008},
  language  = {en}
}
@article{HillenBarryPongs1997,
  author    = {Hillen, Walter and Barry, J. C. and Pongs, U. M.},
  title     = {Algorithm for Purkinje Image I and IV and Limbus Centre Location. Barry, J. C.; Pongs, U. M.; Hillen, W.},
  series = {Computers in Biology and Medicine. 27 (1997), H. 6},
  journal   = {Computers in Biology and Medicine. 27 (1997), H. 6},
  isbn      = {0010-4825},
  pages     = {515 -- 531},
  year      = {1997},
  language  = {en}
}
@article{AltherrLeisePfetschetal.2018,
  author    = {Altherr, Lena and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas},
  title     = {Algorithmic design and resilience assessment of energy efficient high-rise water supply systems},
  series = {Applied Mechanics and Materials},
  volume    = {885},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.885.211},
  pages     = {211 -- 223},
  year      = {2018},
  abstract  = {High-rise water supply systems provide water flow and suitable pressure in all levels of tall buildings. To design such state-of-the-art systems, the consideration of energy efficiency and the anticipation of component failures are mandatory. In this paper, we use Mixed-Integer Nonlinear Programming to compute an optimal placement of pipes and pumps, as well as an optimal control strategy.Moreover, we consider the resilience of the system to pump failures. A resilient system is able to fulfill a predefined minimum functionality even though components fail or are restricted in their normal usage. We present models to measure and optimize the resilience. To demonstrate our approach, we design and analyze an optimal resilient decentralized water supply system inspired by a real-life hotel building.},
  language  = {en}
}
@book{Altherr2016,
  author    = {Altherr, Lena},
  title     = {Algorithmic System Design under Consideration of Dynamic Processes},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-4848-3},
  pages     = {94},
  year      = {2016},
  abstract  = {Nach Stand von Wissenschaft und Technik werden Komponenten hinsichtlich ihrer Eigenschaften, wie Lebensdauer oder Energieeffizienz, optimiert. Allerdings k{\"o}nnen selbst hervorragende Komponenten zu ineffizienten oder instabilen Systemen f{\"u}hren, wenn ihr Zusammenspiel nur unzureichend ber{\"u}cksichtigt wird. Eine Systembetrachtung schafft ein gr{\"o}ßeres Optimierungspotential - dem erh{\"o}hten Potential steht jedoch auch ein erh{\"o}hter Komplexit{\"a}tsgrad gegen{\"u}ber. Die vorliegende Arbeit ist im Rahmen des Sonderforschungsbereichs 805 entstanden, dessen Ziel die Beherrschung von Unsicherheit in Systemen des Maschinenbaus ist. Die Arbeit zeigt anhand eines realen Systems aus dem Bereich der Hydraulik, wie Unsicherheit in der Entwicklungsphase beherrscht werden kann. Hierbei ist neu, dass die durch den sp{\"a}teren Betrieb zu erwartende Systemdegradation eines jeden m{\"o}glichen Systemvorschlags antizipiert werden kann. Dadurch k{\"o}nnen Betriebs- und Wartungskosten vorausgesagt und minimiert werden und durch eine optimale Betriebs- und Wartungsstrategie die Verf{\"u}gbarkeit des Systems garantiert werden. Wesentliche Fragen bei der optimalen Auslegung des betrachteten hydrostatischen Getriebes sind dessen physikalische Modellierung, die Darstellung des Optimierungsproblems als gemischt-ganzzahliges lineares Programm, und dessen algorithmische Behandlung zur L{\"o}sungsfindung. Hierzu werden Heuristiken zum schnelleren Auffinden sinnvoller Systemtopologien vorgestellt und mittels mathematischer Dekomposition eine Bewertung des dynamischen Verschleiß- und Wartungsverlaufs m{\"o}glicher Systemvorschl{\"a}ge vorgenommen. Die Arbeit stellt die Optimierung technischer Systeme an der Schnittstelle von Mathematik, Informatik und Ingenieurwesen sowohl gr{\"u}ndlich als auch anschaulich und nachvollziehbar dar.},
  language  = {en}
}
@inproceedings{AltherrEdererSchaenzleetal.2017,
  author    = {Altherr, Lena and Ederer, Thorsten and Sch{\"a}nzle, Christian and Lorenz, Ulf and Pelz, Peter F.},
  title     = {Algorithmic system design using scaling and affinity laws},
  series = {Operations Research Proceedings 2015},
  booktitle = {Operations Research Proceedings 2015},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-42901-4},
  doi       = {10.1007/978-3-319-42902-1},
  pages     = {605 -- 611},
  year      = {2017},
  abstract  = {Energy-efficient components do not automatically lead to energy-efficient systems. Technical Operations Research (TOR) shifts the focus from the single component to the system as a whole and finds its optimal topology and operating strategy simultaneously. In previous works, we provided a preselected construction kit of suitable components for the algorithm. This approach may give rise to a combinatorial explosion if the preselection cannot be cut down to a reasonable number by human intuition. To reduce the number of discrete decisions, we integrate laws derived from similarity theory into the optimization model. Since the physical characteristics of a production series are similar, it can be described by affinity and scaling laws. Making use of these laws, our construction kit can be modeled more efficiently: Instead of a preselection of components, it now encompasses whole model ranges. This allows us to significantly increase the number of possible set-ups in our model. In this paper, we present how to embed this new formulation into a mixed-integer program and assess the run time via benchmarks. We present our approach on the example of a ventilation system design problem.},
  language  = {en}
}
@inproceedings{AltherrEdererVergeetal.2015,
  author    = {Altherr, Lena and Ederer, Thorsten and Verg{\´e}, Angela and Pelz, Peter F.},
  title     = {Algorithmische Struktursynthese eines hydrostatischen Getriebes},
  series = {Antriebssysteme 2015 : Elektrik, Mechanik, Fluidtechnik in der Anwendung},
  booktitle = {Antriebssysteme 2015 : Elektrik, Mechanik, Fluidtechnik in der Anwendung},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092268-3},
  pages     = {145 -- 155},
  year      = {2015},
  language  = {de}
}
@article{Grotendorst1992,
  author    = {Grotendorst, Johannes},
  title     = {Algorithms of mixed symbolic-numeric type for rational approximation},
  series = {Artificial intelligence, expert systems and symbolic computing : selected and revised papers from the IMACS 13th World Congress [on Computation and Applied Mathematics], Dublin, Ireland, July 1991 / ed. by Elias N. Houstis ...},
  journal   = {Artificial intelligence, expert systems and symbolic computing : selected and revised papers from the IMACS 13th World Congress [on Computation and Applied Mathematics], Dublin, Ireland, July 1991 / ed. by Elias N. Houstis ...},
  publisher = {North-Holland},
  address   = {Amsterdam},
  isbn      = {0-444-89703-8},
  pages     = {145 -- 154},
  year      = {1992},
  language  = {en}
}
@article{JerominScheidt1991,
  author    = {Jeromin, G{\"u}nter Erich and Scheidt, Annette},
  title     = {Aliphatic optically active alcohols by enzyme-aided synthesis},
  series = {Tetrahedron Letters . 32 (1991), H. 48},
  journal   = {Tetrahedron Letters . 32 (1991), H. 48},
  isbn      = {0040-4039},
  pages     = {7021 -- 7024},
  year      = {1991},
  language  = {en}
}
@inproceedings{DyllaFerreinLakemeyer2003,
  author    = {Dylla, Frank and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {AllemaniACs 2003 team description},
  series = {RoboCup 2003 : Robot Soccer World Cup VII},
  booktitle = {RoboCup 2003 : Robot Soccer World Cup VII},
  pages     = {1 -- 3},
  year      = {2003},
  language  = {en}
}
@article{VorstFerreinLakemeyer2006,
  author    = {Vorst, Phillip and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {AllemaniACs3D team description},
  pages     = {1 -- 6},
  year      = {2006},
  language  = {en}
}
@inproceedings{FerreinLakemeyerSchiffer2006,
  author    = {Ferrein, Alexander and Lakemeyer, Gerhard and Schiffer, Stefan},
  title     = {AllemaniACs@ home 2006 team description},
  pages     = {1 -- 6},
  year      = {2006},
  language  = {en}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Alles automatisch : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Elektrotechnik f{\"u}r die Automatisierung},
  volume    = {Bd. 80},
  journal   = {Elektrotechnik f{\"u}r die Automatisierung},
  number    = {H. 4},
  issn      = {0013-581X},
  pages     = {196 -- 199},
  year      = {1998},
  language  = {de}
}
@book{Alt1980,
  author    = {Alt, Helmut},
  title     = {Allgemeine Elektrotechnik, Nachrichtentechnik, Impulstechnik f{\"u}r UPN-Rechner. (Anwendung programmierbarer Taschenrechner ; 2)},
  publisher = {Vieweg},
  address   = {Braunschweig [u.a.]},
  isbn      = {3-528-04151-X},
  pages     = {VII, 109 S. : graph. Darst.},
  year      = {1980},
  language  = {de}
}
@article{Laack1986,
  author    = {Laack, Walter van},
  title     = {Allgemeine physiotherapeutische Behandlung nach H{\"u}ft- und Kniegelenkoperationen},
  series = {Physiotherapie. 77 (1986), H. 2},
  journal   = {Physiotherapie. 77 (1986), H. 2},
  isbn      = {0031-9392},
  pages     = {68 -- 72},
  year      = {1986},
  language  = {de}
}
@article{Grundmann1992,
  author    = {Grundmann, Reinhard},
  title     = {Allgemeines Ger{\"a}uschgesetz und spezifische Schallkenngr{\"o}ßen.},
  series = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  journal   = {HLH - Zeitschrift f{\"u}r Heizung, L{\"u}ftung, Klimatechnik, Haustechnik. 43 (1992), H. 8},
  isbn      = {0017-9906},
  pages     = {437 -- 440},
  year      = {1992},
  language  = {de}
}
@article{SchneiderSchneiderMeinhardtetal.2015,
  author    = {Schneider, Wilhelm and Schneider, Bettina and Meinhardt, Kerstin and Kinder, Stephanie},
  title     = {Allgemeines Steuerrecht},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {44},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {8-9},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {903 -- 910},
  year      = {2015},
  language  = {de}
}
@article{Gaigall2023,
  author    = {Gaigall, Daniel},
  title     = {Allocating and forecasting changes in risk},
  series = {Journal of risk},
  volume    = {25},
  journal   = {Journal of risk},
  number    = {3},
  editor    = {AitSahlia, Farid},
  publisher = {Infopro Digital Risk},
  address   = {London},
  issn      = {1755-2842},
  doi       = {10.21314/JOR.2022.048},
  pages     = {1 -- 24},
  year      = {2023},
  abstract  = {We consider time-dependent portfolios and discuss the allocation of changes in the risk of a portfolio to changes in the portfolio's components. For this purpose we adopt established allocation principles. We also use our approach to obtain forecasts for changes in the risk of the portfolio's components. To put the approach into practice we present an implementation based on the output of a simulation. Allocation is illustrated with an example portfolio in the context of Solvency II. The quality of the forecasts is investigated with an empirical study.},
  language  = {en}
}
@masterthesis{Dankelmann2024,
  type      = {Bachelor Thesis},
  author    = {Dankelmann, Florian},
  title     = {Almanya : kulinarische Br{\"u}cken und Soziale Bindungen der t{\"u}rkischen Diaspora in Deutschland},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {93 Seiten},
  year      = {2024},
  abstract  = {Die fotografische Arbeit "Almanya" veranschaulicht Teilaspekte der t{\"u}rkischen Kultur anhand von Repr{\"a}sentantinnen und Repr{\"a}sentanten der t{\"u}rkeist{\"a}mmigen Community in Deutschland. Mit einem Fokus auf Kulinarik und Formen des Zusammenlebens werden Menschen mit t{\"u}rkischen Wurzeln portr{\"a}tiert, sodass am Ende ein Einblick in deren Lebens- und Gedankenwelt erm{\"o}glicht wird und kulinarische Br{\"u}cken zwischen Deutschen und der t{\"u}rkischen Kultur gebaut werden. Die enthaltene Botschaft, welche das Projekt den Rezipient:innen {\"u}berbringt, ist in einem multikulturellen Land wie Deutschland von großer Wichtigkeit f{\"u}r gegenseitiges Verst{\"a}ndnis und bildet den Boden f{\"u}r ein harmonisches Miteinander.},
  language  = {de}
}
@article{HoylerMohrStaudt1994,
  author    = {Hoyler, Friedrich and Mohr, P. and Staudt, G.},
  title     = {Alpha-cluster states of 212po in a realistic potential model},
  series = {Physical review / C. 50 (1994), H. 5},
  journal   = {Physical review / C. 50 (1994), H. 5},
  isbn      = {0556-2813},
  pages     = {2631 -- 2634},
  year      = {1994},
  language  = {en}
}
@inproceedings{ZiolkoSchmitzSattleretal.2010,
  author    = {Ziolko, C. and Schmitz, M. and Sattler, Johannes, Christoph and Khedim, Ahmed and Hoffschmidt, Bernhard},
  title     = {AlSol - the open volumetric receiver technology moves to Africa},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {93 -- 94},
  year      = {2010},
  language  = {en}
}
@article{PrielmeierWickNagatomoetal.1995,
  author    = {Prielmeier, Franz and Wick, Markus and Nagatomo, Yasushi and Frahm, Jens},
  title     = {Alteration of Intracellular Metabolite Diffusion in Rat Brain In Vivo During Ischemia and Reperfusion / Markus Wick, Yasushi Nagatomo, Franz Prielmeier, Jens Frahm},
  series = {Stroke. 26 (1995), H. 10},
  journal   = {Stroke. 26 (1995), H. 10},
  isbn      = {0039-2499},
  pages     = {1930 -- 1934},
  year      = {1995},
  language  = {en}
}
@article{StaeudleSeynnesLapsetal.2022,
  author    = {St{\"a}udle, Benjamin and Seynnes, Olivier and Laps, Guido and Br{\"u}ggemann, Gert-Peter and Albracht, Kirsten},
  title     = {Altered gastrocnemius contractile behavior in former achilles tendon rupture patients during walking},
  series = {Frontiers in Physiology},
  volume    = {13},
  journal   = {Frontiers in Physiology},
  publisher = {Frontiers Research Foundation},
  address   = {Lausanne},
  issn      = {1664-042X},
  doi       = {10.3389/fphys.2022.792576},
  pages     = {12 Seiten},
  year      = {2022},
  abstract  = {Achilles tendon rupture (ATR) remains associated with functional limitations years after injury. Architectural remodeling of the gastrocnemius medialis (GM) muscle is typically observed in the affected leg and may compensate force deficits caused by a longer tendon. Yet patients seem to retain functional limitations during—low-force—walking gait. To explore the potential limits imposed by the remodeled GM muscle-tendon unit (MTU) on walking gait, we examined the contractile behavior of muscle fascicles during the stance phase. In a cross-sectional design, we studied nine former patients (males; age: 45 ± 9 years; height: 180 ± 7 cm; weight: 83 ± 6 kg) with a history of complete unilateral ATR, approximately 4 years post-surgery. Using ultrasonography, GM tendon morphology, muscle architecture at rest, and fascicular behavior were assessed during walking at 1.5 m⋅s-1 on a treadmill. Walking patterns were recorded with a motion capture system. The unaffected leg served as control. Lower limbs kinematics were largely similar between legs during walking. Typical features of ATR-related MTU remodeling were observed during the stance sub-phases corresponding to series elastic element (SEE) lengthening (energy storage) and SEE shortening (energy release), with shorter GM fascicles (36 and 36\%, respectively) and greater pennation angles (8° and 12°, respectively). However, relative to the optimal fascicle length for force production, fascicles operated at comparable length in both legs. Similarly, when expressed relative to optimal fascicle length, fascicle contraction velocity was not different between sides, except at the time-point of peak series elastic element (SEE) length, where it was 39 ± 49\% lower in the affected leg. Concomitantly, fascicles rotation during contraction was greater in the affected leg during the whole stance-phase, and architectural gear ratios (AGR) was larger during SEE lengthening. Under the present testing conditions, former ATR patients had recovered a relatively symmetrical walking gait pattern. Differences in seen AGR seem to accommodate the profound changes in MTU architecture, limiting the required fascicle shortening velocity. Overall, the contractile behavior of the GM fascicles does not restrict length- or velocity-dependent force potentials during this locomotor task.},
  language  = {en}
}
@article{KotliarHauserOrtneretal.2017,
  author    = {Kotliar, Konstantin and Hauser, Christine and Ortner, Marion and Muggenthaler, Claudia and Diehl-Schmid, Janine and Angermann, Susanne and Hapfelmeier, Alexander and Schmaderer, Christoph and Grimmer, Timo},
  title     = {Altered neurovascular coupling as measured by optical imaging: a biomarker for Alzheimer's disease},
  series = {Scientific Reports},
  volume    = {7},
  journal   = {Scientific Reports},
  number    = {1},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-017-13349-5},
  pages     = {1 -- 11},
  year      = {2017},
  language  = {en}
}
@article{KotliarOrtnerConradietal.2022,
  author    = {Kotliar, Konstantin and Ortner, Marion and Conradi, Anna and Hacker, Patricia and Hauser, Christine and G{\"u}nthner, Roman and Moser, Michaela and Muggenthaler, Claudia and Diehl-Schmid, Janine and Priller, Josef and Schmaderer, Christoph and Grimmer, Timo},
  title     = {Altered retinal cerebral vessel oscillation frequencies in Alzheimer's disease compatible with impaired amyloid clearance},
  series = {Neurobiology of Aging},
  volume    = {120},
  journal   = {Neurobiology of Aging},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0197-4580},
  doi       = {10.1016/j.neurobiolaging.2022.08.012},
  pages     = {117 -- 127},
  year      = {2022},
  abstract  = {Retinal vessels are similar to cerebral vessels in their structure and function. Moderately low oscillation frequencies of around 0.1 Hz have been reported as the driving force for paravascular drainage in gray matter in mice and are known as the frequencies of lymphatic vessels in humans. We aimed to elucidate whether retinal vessel oscillations are altered in Alzheimer's disease (AD) at the stage of dementia or mild cognitive impairment (MCI). Seventeen patients with mild-to-moderate dementia due to AD (ADD); 23 patients with MCI due to AD, and 18 cognitively healthy controls (HC) were examined using Dynamic Retinal Vessel Analyzer. Oscillatory temporal changes of retinal vessel diameters were evaluated using mathematical signal analysis. Especially at moderately low frequencies around 0.1 Hz, arterial oscillations in ADD and MCI significantly prevailed over HC oscillations and correlated with disease severity. The pronounced retinal arterial vasomotion at moderately low frequencies in the ADD and MCI groups would be compatible with the view of a compensatory upregulation of paravascular drainage in AD and strengthen the amyloid clearance hypothesis.},
  language  = {en}
}
@article{LopesLeandroCarvalhoetal.2017,
  author    = {Lopes, Pedro and Leandro, Jorge and Carvalho, Rita F. and Bung, Daniel B.},
  title     = {Alternating skimming flow over a stepped spillway},
  series = {Environmental Fluid Mechanics},
  volume    = {17},
  journal   = {Environmental Fluid Mechanics},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1573-1510},
  doi       = {10.1007/s10652-016-9484-x},
  pages     = {303 -- 322},
  year      = {2017},
  language  = {en}
}
@incollection{WolffSeefeldtBaueretal.2014,
  author    = {Wolff, Nino and Seefeldt, Patric and Bauer, Wolfgang and Fiebig, Christopher and Gerding, Patrick and Parow-Souchon, Kai and Pongs, Anna and Reiffenrath, Matti and Ziemann, Thomas},
  title     = {Alternative application of solar sail technology},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  doi       = {10.1007/978-3-642-34907-2_23},
  pages     = {351 -- 365},
  year      = {2014},
  abstract  = {The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.},
  language  = {en}
}
@article{HolthausSellheierBoenert2003,
  author    = {Holthaus-Sellheier, Ursula and Boenert, Lothar},
  title     = {Alternative Brandschutzkonstruktionen f{\"u}hren zu Kostenreduzierungen / Boenert, Lothar ; Holthaus, Ursula},
  series = {Trockenbau, Akustik : Magazin f{\"u}r Planung und Ausf{\"u}hrung (2003)},
  journal   = {Trockenbau, Akustik : Magazin f{\"u}r Planung und Ausf{\"u}hrung (2003)},
  isbn      = {0179-8006},
  pages     = {30 -- 33},
  year      = {2003},
  language  = {de}
}
@inproceedings{HeuermannSadeghfamFinger2013,
  author    = {Heuermann, Holger and Sadeghfam, Arash and Finger, Torsten},
  title     = {Alternative ignition system based on microwave plasma},
  series = {Advanced ignition systems for gasoline engines : [Vortr{\"a}ge der 1st International Conference Advanced Ignition Systems for Gasoline Engines - 1. Internationale Tagung Z{\"u}ndsysteme f{\"u}r Ottomotoren, 12.-13. November 2012, Berlin]},
  booktitle = {Advanced ignition systems for gasoline engines : [Vortr{\"a}ge der 1st International Conference Advanced Ignition Systems for Gasoline Engines - 1. Internationale Tagung Z{\"u}ndsysteme f{\"u}r Ottomotoren, 12.-13. November 2012, Berlin]},
  publisher = {Expert-Verl.},
  address   = {Renningen},
  organization    = {International Conference Advanced Ignition Systems for Gasoline Engines <1, 2012, Berlin>},
  isbn      = {9783816931904},
  pages     = {95 -- 103},
  year      = {2013},
  language  = {en}
}