@article{BabilonWilbringTappertetal.2018,
  author    = {Babilon, Katharina and Wilbring, Daniela and Tappert, Tim and Pfaff, Raphael and Enning, Manfred},
  title     = {Schienenfahrzeugtechnik hands on - FH Aachen IMechE Railway Challenge},
  series = {Ingenieurspiegel},
  journal   = {Ingenieurspiegel},
  number    = {2},
  publisher = {Public Verlag},
  address   = {Bingen},
  issn      = {1868-5919},
  pages     = {20 -- 22},
  year      = {2018},
  language  = {de}
}
@inproceedings{BueckingPfaffDirksmeier2018,
  author    = {B{\"u}cking, Henrik and Pfaff, Raphael and Dirksmeier, Roger},
  title     = {Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles},
  series = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  booktitle = {Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018},
  pages     = {5 Seiten},
  year      = {2018},
  language  = {en}
}
@misc{KrollLudwigs2013,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Internationales Privatrecht - ein systematischer {\"U}berblick},
  series = {Rabels Zeitschrift f{\"u}r ausl{\"a}ndisches und internationales Privatrecht (RabelsZ)},
  volume    = {77},
  journal   = {Rabels Zeitschrift f{\"u}r ausl{\"a}ndisches und internationales Privatrecht (RabelsZ)},
  number    = {4},
  doi       = {10.1628/003372513X671354},
  pages     = {843 -- 849},
  year      = {2013},
  language  = {de}
}
@article{KrollLudwigsKaesling2014,
  author    = {Kroll-Ludwigs, Kathrin and Kaesling, Katharina},
  title     = {Family Law and Culture in Europe: Developments, Challenges and Opportunities - Konferenz der Commission on European Family Law vom 29.-31. August 2013, Bonn},
  series = {Zeitschrift f{\"u}r Europ{\"a}isches Privatrecht (ZEuP)},
  journal   = {Zeitschrift f{\"u}r Europ{\"a}isches Privatrecht (ZEuP)},
  number    = {3},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0943-3929},
  pages     = {673 -- 676},
  year      = {2014},
  abstract  = {Vor dem Hintergrund zunehmender gesellschaftlicher Ver{\"a}nderungen bei den Lebens- und Familienformen hat es sich die Commission on European Family Law (CEFL) seit 2001 zum Ziel gesetzt, unverbindliche Regelungsvorschl{\"a}ge f{\"u}r ein europaweit einheitliches Familienrecht zu schaffen. Die Vorstellung und Diskussion dieser auf rechtsvergleichender Basis erstellten Principles erfolgt auf den regelm{\"a}ßig veranstalteten Tagungen der CEFL. Die nunmehr f{\"u}nfte Konferenz zum Thema „Family Law and Culture in Europe - Developments, Challenges and Opportunities" fand erstmals in Deutschland statt. Ausgerichtet wurde die Veranstaltung, zu der ca. 200 Teilnehmerinnen und Teilnehmern aus Wissenschaft und Praxis aus insgesamt 33 L{\"a}ndern angereist waren, von Nina Dethloff (Direktorin des Instituts f{\"u}r Deutsches, Europ{\"a}isches und Internationales Familienrecht an der Universit{\"a}t Bonn), Katharina Boele-Woelki (Direktorin des Utrecht Centre for European Research into Family Law und Preistr{\"a}gerin des Anneliese Maier-Forschungspreises der Alexander von Humboldt-Stiftung) und Werner Gephart (Direktor des K{\"a}te Hamburger Kollegs „Recht als Kultur").},
  language  = {de}
}
@inproceedings{GaoBabilonPfaffetal.2018,
  author    = {Gao, H. and Babilon, Katharina and Pfaff, Raphael and Gan, F. and Reich, A.},
  title     = {Model of wheel-rail contact for sanding and adhesion enhancement},
  series = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  booktitle = {Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018},
  isbn      = {978-946186963-0},
  pages     = {314 -- 321},
  year      = {2018},
  language  = {en}
}
@article{FranzenPindersPfaffetal.2018,
  author    = {Franzen, Julius and Pinders, Erik and Pfaff, Raphael and Enning, Manfred},
  title     = {RailCrowd's virtual fleets: Make most of your asset data},
  series = {Deine Bahn},
  journal   = {Deine Bahn},
  number    = {9},
  publisher = {Bahn-Fachverlag},
  address   = {Berlin},
  issn      = {0948-7263},
  pages     = {11 -- 13},
  year      = {2018},
  abstract  = {For smaller railway operators or those with a diverse fleet, it can be difficult to collect sufficient data to improve maintenance programs. At the same time, new rules such as entity in charge of maintenance - ECM - regulations impose an additional workload by requiring a dedicated maintenance management system and specific reports. The RailCrowd platform sets out to facilitate compliance with ECM and similar regulations while at the same time pooling anonymised fleet data across operators to form virtual fleets, providing greater data insights.},
  language  = {en}
}
@inproceedings{Pfaff2018,
  author    = {Pfaff, Raphael},
  title     = {Railway Challenge 2018 - Ein Wettbewerb f{\"u}r Parkbahn-Lokomotiven},
  series = {Deine Bahn},
  booktitle = {Deine Bahn},
  issn      = {0948-7263},
  pages     = {22 -- 24},
  year      = {2018},
  language  = {de}
}
@inproceedings{PfaffMelcherFranzen2018,
  author    = {Pfaff, Raphael and Melcher, Karin and Franzen, Julian},
  title     = {Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems},
  series = {Proceedings of the European Conference of the PHM Society},
  volume    = {4},
  booktitle = {Proceedings of the European Conference of the PHM Society},
  number    = {1},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@book{Drumm2008,
  author    = {Drumm, Christian},
  title     = {Improving Schema Mapping by Exploiting Domain Knowledge},
  pages     = {235 S.},
  year      = {2008},
  language  = {en}
}
@article{RauppSchmittWalzetal.2018,
  author    = {Raupp, Sebastian M. and Schmitt, Marcel and Walz, Anna-Lena and Diehm, Ralf and Hummel, Helga and Scharfer, Philip and Schabel, Wilhelm},
  title     = {Slot die stripe coating of low viscous fluids},
  series = {Journal of Coatings Technology and Research},
  volume    = {15},
  journal   = {Journal of Coatings Technology and Research},
  number    = {5},
  publisher = {Springer},
  issn      = {1935-3804},
  doi       = {10.1007/s11998-017-0039-y},
  pages     = {899 -- 911},
  year      = {2018},
  abstract  = {Slot die coating is applied to deposit thin and homogenous films in roll-to-roll and sheet-to-sheet applications. The critical step in operation is to choose suitable process parameters within the process window. In this work, we investigate an upper limit for stripe coatings. This maximum film thickness is characterized by stripe merging which needs to be avoided in a stable process. It is shown that the upper limit reduces the process window for stripe coatings to a major extent. As a result, stripe coatings at large coating gaps and low viscosities are only possible for relatively thick films. Explaining the upper limit, a theory of balancing the side pressure in the gap region in the cross-web direction has been developed.},
  language  = {en}
}
@inproceedings{DrummSchmittDoetal.2007,
  author    = {Drumm, Christian and Schmitt, Matthias and Do, Hong-Hai and Rahm, Erhard},
  title     = {Quickmig: automatic schema matching for data migration projects},
  series = {Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007},
  booktitle = {Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007},
  isbn      = {978-1-59593-803-9},
  doi       = {10.1145/1321440.1321458},
  pages     = {107 -- 116},
  year      = {2007},
  language  = {en}
}
@inproceedings{WeberMarkovicDrumm2007,
  author    = {Weber, Ingo and Markovic, Ivan and Drumm, Christian},
  title     = {A conceptual framework for composition in business process management},
  series = {Business Information Systems : 10th International Conference, BIS 2007, Poznan, Poland, April 25-27, 2007. Proceedings},
  booktitle = {Business Information Systems : 10th International Conference, BIS 2007, Poznan, Poland, April 25-27, 2007. Proceedings},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-540-72035-5},
  doi       = {10.1007/978-3-540-72035-5_5},
  pages     = {54 -- 66},
  year      = {2007},
  language  = {en}
}
@incollection{DrummLemckeOberle2007,
  author    = {Drumm, Christian and Lemcke, Jens and Oberle, Daniel},
  title     = {Business Process Management And Semantic Technologies},
  series = {The Semantic Web},
  booktitle = {The Semantic Web},
  publisher = {Springer},
  address   = {Boston, MA},
  isbn      = {978-0-387-48531-7},
  doi       = {10.1007/978-0-387-48531-7_10},
  pages     = {207 -- 239},
  year      = {2007},
  language  = {en}
}
@inproceedings{DrummLemckeOberle2006,
  author    = {Drumm, Christian and Lemcke, Jens and Oberle, Daniel},
  title     = {Integrating Semantic Web Services and Business Process Management: A Real Use Case},
  series = {Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006},
  booktitle = {Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006},
  pages     = {15 Seiten},
  year      = {2006},
  language  = {en}
}
@inproceedings{KunfermannDrumm2005,
  author    = {Kunfermann, Philipp and Drumm, Christian},
  title     = {Lifting XML schemas to ontologies - the concept finder algorithm},
  series = {MEDIATE 2005 First International Workshop on Mediation in Semantic Web Services Proceedings of the First International Workshop on Mediation in Semantic Web Services (MEDIATE 2005)},
  booktitle = {MEDIATE 2005 First International Workshop on Mediation in Semantic Web Services Proceedings of the First International Workshop on Mediation in Semantic Web Services (MEDIATE 2005)},
  pages     = {113 -- 122},
  year      = {2005},
  language  = {en}
}
@article{HueningHillgaertnerReke2019,
  author    = {H{\"u}ning, Felix and Hillg{\"a}rtner, Michael and Reke, Michael},
  title     = {Rolling Labs - Teaching Vehicle Electronics from the Beginning},
  series = {International Journal of Engineering Pedagogy (iJEP)},
  volume    = {9},
  journal   = {International Journal of Engineering Pedagogy (iJEP)},
  number    = {1},
  issn      = {2192-4880},
  doi       = {10.3991/ijep.v9i1.9241},
  pages     = {34 -- 49},
  year      = {2019},
  language  = {en}
}
@article{SchmidtEnningPfaff2018,
  author    = {Schmidt, Bernd and Enning, Manfred and Pfaff, Raphael},
  title     = {G{\"u}terwagen 4.0 - Der G{\"u}terwagen f{\"u}r das Internet der Dinge Teil 3: Einf{\"u}hrungsszenarien f{\"u}r aktive, kommunikative G{\"u}terwagen},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {67},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {5},
  publisher = {DVV Media Group},
  address   = {Hamburg},
  issn      = {0013-2845},
  pages     = {60 -- 64},
  year      = {2018},
  abstract  = {Wenn durch innovative, automatisierte G{\"u}terwagen betriebswirtschaftliche Vorteile nutzbar gemacht werden sollen, muss die Migration auf das neue System in sinnvollen Teilschritten unter Ber{\"u}cksichtigung der organisationellen und betrieblichen Vereinbarkeit vorgenommen werden. Eine stufenweise Migration mit Nachr{\"u}stbarkeit und Kompatibilit{\"a}t kann die optimale Ausstattungsvariante f{\"u}r die unterschiedlichen Betriebsszenarien sowie eine Steigerung der Wirtschaftlichkeit des Gesamtsystems bieten.},
  language  = {de}
}
@article{Thomas2018,
  author    = {Thomas, Axel},
  title     = {Technologiezentren in der Aachener Region - Retrospektiven und Perspektiven},
  series = {VM Verwaltung und Management},
  volume    = {24},
  journal   = {VM Verwaltung und Management},
  number    = {3},
  publisher = {Nomos},
  address   = {Baden-Baden},
  issn      = {0947-9856},
  doi       = {10.5771/0947-9856-2018-3-147},
  pages     = {147 -- 156},
  year      = {2018},
  language  = {de}
}
@article{Thomas2018,
  author    = {Thomas, Axel},
  title     = {Zielerreichungen der Technologie- und Gr{\"u}nderzentren aus Sicht der kommunalen Finanzwirtschaft - dargestellt am Beispiel der Aachener Region},
  series = {Der Gemeindehaushalt},
  volume    = {119},
  journal   = {Der Gemeindehaushalt},
  number    = {7},
  publisher = {Kohlhammer},
  address   = {Stuttgart},
  issn      = {0340-3645},
  pages     = {149 -- 155},
  year      = {2018},
  language  = {de}
}
@article{Bernecker2010,
  author    = {Bernecker, Andreas},
  title     = {A European Private Company: Is Europe's single legal form for SMEs close to approval?},
  series = {Research Briefing},
  journal   = {Research Briefing},
  publisher = {Deutsche Bank Research},
  address   = {Frankfurt a. M.},
  issn      = {2193-5955},
  year      = {2010},
  abstract  = {This Research Briefing, issued in July 2010, concluded that: - Small and medium-sized enterprises (SMEs) in Europe have long called for a matching legal form valid across the EU (similar to that of the European company (SE) for large firms) - The main benefits would be the availability of uniform Europe-wide company structures, significant cost reductions for businesses and further integration of the internal market - Given the differing national views regarding the concrete features of the new legal form there is currently no sign of an agreement being reached at the European level in the short term; however, it is possible that progress will be made in negotiations during the year - The key issues being discussed in depth are company formation, transnationality and employee participation rights in the new European private company (SPE).},
  language  = {en}
}
@article{GoergensGreubelMoosdorf2013,
  author    = {G{\"o}rgens, Stefan and Greubel, Steffen and Moosdorf, Andreas},
  title     = {How to mobilize 20,000 people: Perspectives on retail and consumer goods},
  pages     = {52 -- 58},
  year      = {2013},
  language  = {en}
}
@inproceedings{WiesenEngemannLimpertetal.2018,
  author    = {Wiesen, Patrick and Engemann, Heiko and Limpert, Nicolas and Kallweit, Stephan},
  title     = {Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School},
  series = {European Robotics Forum 2018, TRROS18 Workshop},
  booktitle = {European Robotics Forum 2018, TRROS18 Workshop},
  pages     = {47 -- 58},
  year      = {2018},
  language  = {en}
}
@article{Moosdorf2009,
  author    = {Moosdorf, Andreas},
  title     = {It's not just the Talent, it's the Knowledge Transfer Method},
  series = {GC Ticker},
  journal   = {GC Ticker},
  number    = {1},
  pages     = {16 -- 16},
  year      = {2009},
  language  = {en}
}
@book{Moosdorf2008,
  author    = {Moosdorf, Andreas},
  title     = {The determinants of international knowledge transfer effectiveness - conceptual advances and empirical verification},
  year      = {2008},
  language  = {en}
}
@incollection{KrollLudwigs2011,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Einleitung vor \S 1297 BGB},
  series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]},
  booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]},
  edition   = {13., neu bearb. Aufl.},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  isbn      = {9783504471019},
  pages     = {4299},
  year      = {2011},
  language  = {de}
}
@incollection{KrollLudwigs2011,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Vor \S 1297 bis \S 1302 BGB (Verl{\"o}bnis)},
  series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]},
  booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]},
  edition   = {13., neu bearb. Aufl.},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  isbn      = {9783504471019},
  year      = {2011},
  language  = {de}
}
@incollection{KrollLudwigs2017,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Names of individuals},
  series = {European Encyclopedia of Private International Law},
  booktitle = {European Encyclopedia of Private International Law},
  publisher = {Edward Elgar Publishing},
  address   = {Cheltenham, UK},
  isbn      = {9781782547228},
  year      = {2017},
  language  = {en}
}
@incollection{KrollLudwigs2017,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Small Claims Regulation},
  series = {European Encyclopedia of Private International Law},
  booktitle = {European Encyclopedia of Private International Law},
  publisher = {Edward Elgar Publishing},
  address   = {Cheltenham, UK},
  isbn      = {9781782547228},
  year      = {2017},
  language  = {en}
}
@incollection{BarnatJaensch2019,
  author    = {Barnat, Miriam and J{\"a}nsch, Vanessa K.},
  title     = {Forschendes Lernen und Studienerfolg: Die Bedeutung epistemischer Neugier},
  series = {Forschendes Lernen in der Studieneingangsphase: Empirische Befunde, Fallbeispiele und individuelle Perspektiven},
  booktitle = {Forschendes Lernen in der Studieneingangsphase: Empirische Befunde, Fallbeispiele und individuelle Perspektiven},
  publisher = {Springer VS},
  address   = {Wiesbaden},
  isbn      = {978-3-658-25312-7},
  doi       = {10.1007/978-3-658-25312-7_6},
  pages     = {99 -- 109},
  year      = {2019},
  abstract  = {Forschendes Lernen ist dazu geeignet, epistemische Neugier - definiert als Freude an neuen Erkenntnissen - anzuregen und zu befriedigen. Neben der Selbstwirksamkeit zeigt sich die Neugier als relevant f{\"u}r den Studienerfolg. Allerdings ist bisher nicht gekl{\"a}rt, in welcher Beziehung diese beiden Konstrukte zueinanderstehen.},
  language  = {de}
}
@incollection{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Art. 5 Rom III-Regulation (choice of applicable law by the parties)},
  series = {Rome Regulations : commentary},
  booktitle = {Rome Regulations : commentary},
  editor    = {Calliess, Gralf-Peter},
  edition   = {2nd ed.},
  publisher = {Wolters Kluwer},
  isbn      = {9789041147547},
  year      = {2015},
  language  = {en}
}
@incollection{CalliessKrollLudwigs2015,
  author    = {Calliess, Gralf-Peter and Kroll-Ludwigs, Kathrin},
  title     = {Art. 6 Rome III-Regulation (consent and material validity)},
  series = {Rome Regulations : commentary},
  booktitle = {Rome Regulations : commentary},
  publisher = {Wolters Kluwer},
  isbn      = {9789041147547},
  year      = {2015},
  language  = {en}
}
@incollection{KrollLudwigs2015,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Art. 7 Rome III-Regulation (formal validity)},
  series = {Rome Regulations : commentary},
  booktitle = {Rome Regulations : commentary},
  editor    = {Colliess, Gralf-Peter},
  edition   = {2nd ed.},
  publisher = {Wolters Kluwer},
  isbn      = {9789041147547},
  year      = {2015},
  language  = {en}
}
@inproceedings{SerrorHenzeHacketal.2018,
  author    = {Serror, Martin and Henze, Martin and Hack, Sacha and Schuba, Marko and Wehrle, Klaus},
  title     = {Towards in-network security for smart homes},
  series = {13th International Conference on Availability, Reliability and Security, ARES 2018; Hamburg; Germany; 27 August 2018 through 30 August 2018},
  booktitle = {13th International Conference on Availability, Reliability and Security, ARES 2018; Hamburg; Germany; 27 August 2018 through 30 August 2018},
  isbn      = {978-145036448-5},
  doi       = {10.1145/3230833.3232802},
  pages     = {Article numer 3232802},
  year      = {2018},
  language  = {en}
}
@incollection{RoethDeutskensKreiskoetheretal.2018,
  author    = {R{\"o}th, Thilo and Deutskens, Christoph and Kreisk{\"o}ther, Kai and Heimes, Heiner Hans and Schittny, Bastian and Ivanescu, Sebastian and Kleine B{\"u}ning, Max and Reinders, Christian and Wessels, Saskia and Haunreiter, Andreas and Reisgen, Uwe and Thiele, Regina and Hameyer, Kay and Doncker, Rik W. de and Sauer, Uwe and Hoek, Hauke van and H{\"u}bner, Mareike and Hennen, Martin and Stolze, Thilo and Vetter, Andreas and Hagedorn, J{\"u}rgen and M{\"u}ller, Dirk and Rewitz, Kai and Wesseling, Mark and Flieger, Bj{\"o}rn},
  title     = {Entwicklung von elektrofahrzeugspezifischen Systemen},
  series = {Elektromobilit{\"a}t},
  booktitle = {Elektromobilit{\"a}t},
  publisher = {Springer Vieweg},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-53137-2},
  doi       = {10.1007/978-3-662-53137-2_6},
  pages     = {279 -- 386},
  year      = {2018},
  abstract  = {Die Batterie ist eine der absolut zentralen Komponenten des Elektrofahrzeugs. Die serielle Entwicklung und Produktion dieser Batterien und die Verbesserung der Leistungen wird entscheidend f{\"u}r den Erfolg der Elektromobilit{\"a}t sein. Die Batterie ist jedoch nicht das einzige elektrofahrzeugspezifische System, das neu entwickelt, umkonzipiert oder verbessert werden muss. So sind ebenso die Entwicklung der neuen Fahrzeugstruktur sowie des elektrifizierten Antriebsstranges Teil dieses Kapitels. Weiterhin wird ein Blick auf das bedeutende Thema des Thermomanagements geworfen.},
  language  = {de}
}
@article{Bernecker2016,
  author    = {Bernecker, Andreas},
  title     = {Divided we reform? Evidence from US welfare policies},
  series = {Journal of Public Economics},
  volume    = {142},
  journal   = {Journal of Public Economics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-2727},
  doi       = {10.1016/j.jpubeco.2016.08.003},
  pages     = {24 -- 38},
  year      = {2016},
  abstract  = {Divided government is often thought of as causing legislative deadlock. I investigate the link between divided government and economic reforms using a novel data set on welfare reforms in US states between 1978 and 2010. Panel data regressions show that, under divided government, a US state is around 25\% more likely to adopt a welfare reform than under unified government. Several robustness checks confirm this counter-intuitive finding. Case study evidence suggests an explanation based on policy competition between governor, senate, and house.},
  language  = {en}
}
@article{Bernecker2014,
  author    = {Bernecker, Andreas},
  title     = {Do politicians shirk when reelection is certain? Evidence from the German parliament},
  series = {European Journal of Political Economy},
  volume    = {36},
  journal   = {European Journal of Political Economy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0176-2680},
  doi       = {10.1016/j.ejpoleco.2014.07.001},
  pages     = {55 -- 70},
  year      = {2014},
  abstract  = {Does stiffer electoral competition reduce political shirking? For a micro-analysis of this question, I construct a new data set spanning the years 2005 to 2012 covering biographical and political information about German Members of Parliament (MPs), including their attendance rates in voting sessions. For the parliament elected in 2009, I show that indeed opposition party MPs who expect to face a close race in their district show significantly and relevantly lower absence rates in parliament beforehand. MPs of governing parties seem not to react significantly to electoral competition. These results are confirmed by an analysis of the parliament elected in 2005, by several robustness checks, and also by employing an instrumental variable strategy exploiting convenient peculiarities of the German electoral system. The study also shows how MPs elected via party lists react to different levels of electoral competition.},
  language  = {en}
}
@article{Bernecker2014,
  author    = {Bernecker, Andreas},
  title     = {Divided Government and the Adoption of Economic Reforms},
  series = {CESifo DICE Report - Journal for Institutional Comparison},
  volume    = {12},
  journal   = {CESifo DICE Report - Journal for Institutional Comparison},
  number    = {4},
  publisher = {Ifo Institute for Economic Research},
  address   = {M{\"u}nchen},
  issn      = {1612-0663},
  pages     = {47 -- 52},
  year      = {2014},
  language  = {en}
}
@book{Bernecker2014,
  author    = {Bernecker, Andreas},
  title     = {Essays in Empirical Political Economics},
  pages     = {XI, 174 S. : Ill., graph. Darst.},
  year      = {2014},
  language  = {en}
}
@incollection{KlockeKatz2017,
  author    = {Klocke, Martina and Katz, Christiane},
  title     = {Heterogenit{\"a}t von MINT-Studierenden als Herausforderung},
  series = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern},
  booktitle = {Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-F{\"a}chern},
  publisher = {Technische Hochschule N{\"u}rnberg Georg Simon Ohm},
  address   = {N{\"u}rnberg},
  pages     = {31 -- 36},
  year      = {2017},
  language  = {de}
}
@incollection{Klocke2018,
  author    = {Klocke, Martina},
  title     = {Schulter an Schulter - Zusammenarbeit in einem differenzierten Hochschulsystem},
  series = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn},
  booktitle = {Lehre und Lehrentwicklung an Fachhochschulen - Festschrift f{\"u}r Prof. Dr. med. W. Huhn},
  publisher = {Waxmann},
  address   = {M{\"u}nster},
  isbn      = {978-3-8309-3782-1},
  pages     = {75 -- 80},
  year      = {2018},
  language  = {de}
}
@incollection{KrollLudwigs2011,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Vor \S 1353 bis \S 1362 BGB (Allgemeine Ehewirkungen)},
  series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]},
  booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]},
  edition   = {13., neu bearb. Aufl.},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  isbn      = {9783504471019},
  year      = {2011},
  language  = {de}
}
@article{ArreolaKeusgenSchoening2019,
  author    = {Arreola, Julio and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Toward an immobilization method for spore-based biosensors in oxidative environment},
  series = {Electrochimica Acta},
  volume    = {302},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.electacta.2019.01.148},
  pages     = {394 -- 401},
  year      = {2019},
  language  = {en}
}
@book{Molinnus2018,
  author    = {Molinnus, Denise},
  title     = {Integration of biomolecular logic principles with electronic transducers on a chip},
  publisher = {Philipps-Universit{\"a}t / Fachbereich Pharmazie},
  address   = {Marburg/Lahn},
  year      = {2018},
  language  = {de}
}
@incollection{RaoPathroseHueningetal.2019,
  author    = {Rao, Deepak and Pathrose, Plato and H{\"u}ning, Felix and Sid, Jithin},
  title     = {An Approach for Validating Safety of Perception Software in Autonomous Driving Systems},
  series = {Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16-18, 2019, Proceedings},
  booktitle = {Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16-18, 2019, Proceedings},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-32872-6},
  doi       = {10.1007/978-3-030-32872-6_20},
  pages     = {303 -- 316},
  year      = {2019},
  abstract  = {The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon's DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.},
  language  = {en}
}
@inproceedings{KromeSander2018,
  author    = {Krome, Cornelia and Sander, Volker},
  title     = {Time series analysis with apache spark and its applications to energy informatics},
  series = {Proceedings of the 7th DACH+ Conference on Energy Informatics},
  booktitle = {Proceedings of the 7th DACH+ Conference on Energy Informatics},
  doi       = {10.1186/s42162-018-0043-1},
  year      = {2018},
  abstract  = {In energy economy forecasts of different time series are rudimentary. In this study, a prediction for the German day-ahead spot market is created with Apache Spark and R. It is just an example for many different applications in virtual power plant environments. Other examples of use as intraday price processes, load processes of machines or electric vehicles, real time energy loads of photovoltaic systems and many more time series need to be analysed and predicted. This work gives a short introduction into the project where this study is settled. It describes the time series methods that are used in energy industry for forecasts shortly. As programming technique Apache Spark, which is a strong cluster computing technology, is utilised. Today, single time series can be predicted. The focus of this work is on developing a method to parallel forecasting, to process multiple time series simultaneously with R and Apache Spark.},
  language  = {en}
}
@inproceedings{Matcha2016,
  author    = {Matcha, Heike},
  title     = {From Designing Buildings from Systems to Designing Systems for Buildings},
  series = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  booktitle = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  editor    = {Herneoja, Aulikki and {\"O}sterlund, Toni and Markkanen, Piia},
  publisher = {ECAADe},
  address   = {Oulu, Finland},
  doi       = {10.52842/conf.ecaade.2016.1.237},
  pages     = {237 -- 240},
  year      = {2016},
  abstract  = {We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.},
  language  = {en}
}
@article{Matcha2015,
  author    = {Matcha, Heike},
  title     = {Parametrized Systems: Conceiving of Buildings as Assemblies of Varied Parts},
  series = {Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015},
  journal   = {Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015},
  editor    = {Martens, B.},
  pages     = {143 -- 148},
  year      = {2015},
  language  = {en}
}
@inproceedings{Huening2019,
  author    = {H{\"u}ning, Felix},
  title     = {Complexity for heterogeneous classes: teaching embedded systems using an open project approach},
  series = {Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings},
  booktitle = {Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings},
  isbn      = {978-2-87352-018-2},
  pages     = {540 -- 549},
  year      = {2019},
  language  = {en}
}
@incollection{MuellerJungSchmoelzer2015,
  author    = {Mueller, Wolfram and Jung, Alexander and Schm{\"o}lzer, Bernhard},
  title     = {Der Einfluss der H{\"o}he {\"u}ber dem Meeresspiegel auf die Flugbahnen im Schispringen},
  series = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  booktitle = {Jahrbuch 2015 - {\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  editor    = {Faulhaber, Martin and Schobersberger, Wolfgang and Schobersberger, Beatrix and Sumann, G{\"u}nther and Domej, Wolfgang},
  publisher = {{\"O}sterreichische Gesellschaft f{\"u}r Alpin- und H{\"o}henmedizin},
  address   = {Innsbruck},
  isbn      = {978-3-9501312-5-3},
  pages     = {173 -- 190},
  year      = {2015},
  language  = {de}
}
@article{Delaittre2019,
  author    = {Delaittre, Guillaume},
  title     = {Telechelic Poly(2-Oxazoline)s},
  series = {European Polymer Journal},
  journal   = {European Polymer Journal},
  number    = {In Press, Journal Pre-proof, 109281},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0014-3057},
  doi       = {10.1016/j.eurpolymj.2019.109281},
  year      = {2019},
  language  = {en}
}
@article{MennickenPeterKaulenetal.2019,
  author    = {Mennicken, Max and Peter, Sophia Katharina and Kaulen, Corinna and Simon, Ulrich and Karth{\"a}user, Silvia},
  title     = {Controlling the Electronic Contact at the Terpyridine/Metal Interface},
  series = {The Journal of Physical Chemistry C},
  volume    = {123},
  journal   = {The Journal of Physical Chemistry C},
  number    = {35},
  issn      = {1932-7455},
  doi       = {10.1021/acs.jpcc.9b05865},
  pages     = {21367 -- 21375},
  year      = {2019},
  language  = {en}
}
@article{ArreolaKeusgenWagneretal.2019,
  author    = {Arreola, Julio and Keusgen, Michael and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines},
  series = {Biosensors and Bioelectronics},
  volume    = {143},
  journal   = {Biosensors and Bioelectronics},
  number    = {111628},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0956-5663},
  doi       = {10.1016/j.bios.2019.111628},
  year      = {2019},
  language  = {en}
}
@inproceedings{WiesenSchleser2019,
  author    = {Wiesen, Andreas and Schleser, Markus},
  title     = {Entwicklung einer Qualit{\"a}tssicherung f{\"u}r das Laserstrahlschweißen im Vakuum mittels Bildverarbeitung},
  series = {Große Schweißtechnische Tagung},
  booktitle = {Große Schweißtechnische Tagung},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-96144-066-5},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {de}
}
@inproceedings{OttenGerhardsSchleseretal.2019,
  author    = {Otten, Christian and Gerhards, Benjamin and Schleser, Markus and Schwarz, A. and Gebhardt, Andreas},
  title     = {Innovative Laserschweißtechnologie f{\"u}r additiv gefertigte Bauteile},
  series = {Große Schweißtechnische Tagung},
  booktitle = {Große Schweißtechnische Tagung},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-96144-066-5},
  pages     = {150 -- 157},
  year      = {2019},
  language  = {de}
}
@book{FissabreMatcha2018,
  author    = {Fissabre, Anke and Matcha, Heike},
  title     = {KreuzPlus : zwei Kreuze und zwei M{\"o}bel f{\"u}r die Kreuzkirche in Heinsberg},
  publisher = {Fachbereich Architektur, FH Aachen, University of Applied Science},
  address   = {Aachen},
  isbn      = {978-3-9820371-0-3},
  pages     = {50 Seiten},
  year      = {2018},
  language  = {de}
}
@book{Matcha2019,
  author    = {Matcha, Heike},
  title     = {Wabentheke : elementiertes großformatiges M{\"o}bel in 3D-Druck},
  publisher = {Fachbereich Architektur, FH Aachen, University of Applied Science},
  address   = {Aachen},
  isbn      = {978-3-9820371-1-0},
  pages     = {50 Seiten},
  year      = {2019},
  language  = {de}
}
@phdthesis{Gossmann2015,
  author    = {Goßmann, Matthias},
  title     = {Entwicklung eines autokontraktilen Herzmuskelmodells zur funktionalen Medikamenten- und Toxinforschung},
  publisher = {Universit{\"a}tsbibliothek Duisburg-Essen},
  address   = {Duisburg ; Essen},
  year      = {2015},
  language  = {de}
}
@phdthesis{Seifarth2015,
  author    = {Seifarth, Volker},
  title     = {Ureteral tissue engineering : development of a bioreactor system and subsequent characterization of the generated biohybrids},
  publisher = {Universit{\"a}tsbibliothek Duisburg-Essen},
  address   = {Duisburg ; Essen},
  year      = {2015},
  language  = {en}
}
@phdthesis{Oflaz2012,
  author    = {Oflaz, Hakan},
  title     = {Entwicklung eines Prototypen zur Prognose von Fr{\"u}hgeburten : ein biomedizintechnischer Ansatz},
  publisher = {Deutsche Zentralbibliothek f{\"u}r Medizin},
  address   = {K{\"o}ln},
  doi       = {10.4126/38m-004639208},
  year      = {2012},
  language  = {en}
}
@phdthesis{Behbahani2011,
  author    = {Behbahani, Mehdi},
  title     = {Modeling and Simulation of Shear-Dependent Platelet Reactions in Blood Vessels and Blood-Contacting Medical Devices},
  publisher = {Verlag Dr. Hut},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8439-0134-5},
  year      = {2011},
  language  = {en}
}
@phdthesis{KurulganDemirci2012,
  author    = {Kurulgan Demirci, Eylem},
  title     = {The effect of rhAPC on contractile tension : an in-vitro sepsis model of cardiomyocytes and endothelial cells},
  year      = {2012},
  language  = {en}
}
@phdthesis{Trzewik2007,
  author    = {Trzewik, J{\"u}rgen},
  title     = {Experimental analysis of biaxial mechanical tension in cell monolayers and cultured three-dimensional tissues: the celldrum technology},
  publisher = {Univerist{\"a}tsverlg Ilmenau},
  address   = {Ilmenau},
  year      = {2007},
  language  = {en}
}
@phdthesis{Kelemen1999,
  author    = {Kelemen, Christina},
  title     = {Analyse des phasensprungartigen Einsetzens der Passage humaner Erythrozyten durch Mikropipetten bei kritischen Temperaturen},
  publisher = {Forschungszentrum, Zentralbibliothek},
  address   = {J{\"u}lich},
  year      = {1999},
  language  = {de}
}
@incollection{BorchertTenbrake2020,
  author    = {Borchert, J{\"o}rg and Tenbrake, Andre},
  title     = {Bewirtschaftung von Flexibilit{\"a}t {\"u}ber Microservices eines Plattformanbieters},
  series = {Realisierung Utility 4.0 Band 1},
  booktitle = {Realisierung Utility 4.0 Band 1},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-25332-5},
  doi       = {10.1007/978-3-658-25332-5_37},
  pages     = {615 -- 626},
  year      = {2020},
  abstract  = {Die Energiewirtschaft befindet sich in einem starken Wandel, der v. a. durch die Energiewende und Digitalisierung Druck auf s{\"a}mtliche Marktteilnehmer aus{\"u}bt. Das klassische Gesch{\"a}ftsmodell des Energieversorgungsunternehmens ver{\"a}ndert sich dabei grundlegend. Der kontinuierlich ansteigende Einsatz dezentraler und volatiler Erzeugungsanlagen macht die Identifikation von Flexibilit{\"a}tspotenzialen notwendig, um weiterhin eine hohe Versorgungssicherheit zu gew{\"a}hrleisten. Dieser Schritt ist nur mit einem hohen Digitalisierungsgrad m{\"o}glich. Eine funktionale Plattform mit Microservices, die zu Gesch{\"a}ftsprozessen verbunden werden k{\"o}nnen, wird als M{\"o}glichkeit zur Aktivierung der Flexibilit{\"a}t und Digitalisierung der Energieversorgungsunternehmen im Folgenden vorgestellt.},
  language  = {de}
}
@misc{WandreyBiselliSchroederetal.1999,
  author    = {Wandrey, Christian and Biselli, Manfred and Schr{\"o}der, Bernd and Schmoll, Hans-Joachim},
  title     = {Culturing cells on macroporous glass carriers coated with gelatin, extracellular matrix protein and stromal cells},
  pages     = {1 -- 12},
  year      = {1999},
  language  = {en}
}
@article{KromeHoeftSander2019,
  author    = {Krome, Cornelia and H{\"o}ft, Jan and Sander, Volker},
  title     = {Clustering time series applied to energy markets},
  series = {Energy Informatics},
  volume    = {2},
  journal   = {Energy Informatics},
  number    = {Article numer 17},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2520-8942},
  doi       = {10.1186/s42162-019-0076-0},
  pages     = {1 -- 20},
  year      = {2019},
  language  = {en}
}
@phdthesis{Foeckler2016,
  author    = {F{\"o}ckler, Nicole},
  title     = {Biomarker zur Prognose von Fr{\"u}hgeburten : ein biomedizintechnischer Ansatz},
  publisher = {Deutsche Zentralbibliothek f{\"u}r Medizin},
  address   = {K{\"o}ln},
  doi       = {10.4126/FRL01-006401575},
  pages     = {VII, 117 S.},
  year      = {2016},
  language  = {de}
}
@phdthesis{BassamAbduljabbar2015,
  author    = {Bassam Abduljabbar, Rasha},
  title     = {Physikalisch-chemische Steuerung der Proteinstabilit{\"a}t in biologischen Systemen},
  year      = {2015},
  language  = {de}
}
@phdthesis{Duong2015,
  author    = {Duong, Minh Tuan},
  title     = {Hyperelastic modeling and soft-tissue growth integrated with the smoothed finite element method - SFEM},
  publisher = {RWTH Aachen University},
  pages     = {174 S.},
  year      = {2015},
  language  = {en}
}
@phdthesis{Pham2011,
  author    = {Pham, Phu Tinh},
  title     = {Upper bound limit and shakedown analysis of elastic-plastic bounded linearly kinematic hardening structures},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  pages     = {140 S.},
  year      = {2011},
  language  = {en}
}
@misc{BiselliThoemmesWandrey1991,
  author    = {Biselli, Manfred and Th{\"o}mmes, J{\"o}rg and Wandrey, Christian},
  title     = {Verfahren und Vorrichtung zur Abtrennung von Ammonium aus w{\"a}ßrigen Fl{\"u}ssigkeiten [Europ{\"a}ische Patentanmeldung]},
  pages     = {1 -- 12},
  year      = {1991},
  language  = {de}
}
@misc{BiselliBornWandrey1996,
  author    = {Biselli, Manfred and Born, Christoph and Wandrey, Christian},
  title     = {Wirbelschicht-Bioreaktor mit Tr{\"a}gergranulat und daf{\"u}r geeigneter Steril-Bef{\"u}llbeh{\"a}lter [Offenlegungsschrift]},
  pages     = {1 -- 10},
  year      = {1996},
  language  = {de}
}
@book{BiselliBornSchroederetal.1997,
  author    = {Biselli, Manfred and Born, Christoph and Schr{\"o}der, Bernd and Wandrey, Christian},
  title     = {Reaktor f{\"u}r die Zellkulturtechnik mit blasenfreier Begasung},
  pages     = {10 S.},
  year      = {1997},
  language  = {de}
}
@misc{BiselliBornPapaspyrouetal.1996,
  author    = {Biselli, Manfred and Born, Christoph and Papaspyrou, Manfred and Schr{\"o}der, Bernd and Wandrey, Christian},
  title     = {Begasungs-Rohrmodul mit selektiv gasdurchl{\"a}ssiger Schlauchmembran und damit versehene Reaktoren f{\"u}r Zellkulturtechnik sowie Wirbelschicht-Reaktoren f{\"u}r Zellkultivierung [Offenlegunsschrift]},
  pages     = {1 -- 8},
  year      = {1996},
  language  = {de}
}
@misc{PapaspyrouBornBisellietal.1996,
  author    = {Papaspyrou, Manfred and Born, Christoph and Biselli, Manfred and Schr{\"o}der, Bernd},
  title     = {Verfahren zur Bestimmung von Pharmakokinetik bzw. Toxikokinetik von Testsubstanzen mit Hilfe von in-vitro-Zellkultursystemen und daf{\"u}r geeignete Vorrichtungen [Offenlegungsschrift]},
  pages     = {1 -- 10},
  year      = {1996},
  language  = {de}
}
@misc{BergerBiselliDinteretal.2000,
  author    = {Berger, Eric G. and Biselli, Manfred and Dinter, Andr{\´e} and Eisenkr{\"a}tzer, Detlef and Kiesewetter, Andr{\´e} and Zeng, Steffen},
  title     = {Chinese-Hamster-Ovary-Zellen zur Produktion von Proteinen},
  pages     = {1 -- 6},
  year      = {2000},
  language  = {de}
}
@misc{SchmidtJelinekBiselli1999,
  author    = {Schmidt, Sebastian and Jelinek, Nanni and Biselli, Manfred},
  title     = {Verfahren zur Durchf{\"u}hrung von chemischen oder biologischen Reaktionen},
  pages     = {1 -- 12},
  year      = {1999},
  language  = {de}
}
@incollection{FiedlerHennMelcher2015,
  author    = {Fiedler, Gerda and Henn, Gudrun and Melcher, Karin},
  title     = {ANPAK - Ein Anpassungskurs f{\"u}r Studienanf{\"a}nger in den Ingenieurwissenschaften},
  series = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /},
  booktitle = {Qualifizierung von Studierenden im Student-Life-Cycle. Tagungsband zum Mosbacher Tag der Lehre am 23.10.2014 /},
  editor    = {Morschheuser, Petra},
  publisher = {Duale Hochschule Baden-W{\"u}rttemberg (DHBW)},
  address   = {Mosbach},
  isbn      = {978-3-943656-02-2},
  pages     = {90 -- 93},
  year      = {2015},
  language  = {de}
}
@article{QuittmannAbelAlbrachtetal.2020,
  author    = {Quittmann, Oliver J. and Abel, Thomas and Albracht, Kirsten and Meskemper, Joshua and Foitschik, Tina and Str{\"u}der, Heiko K.},
  title     = {Biomechanics of handcycling propulsion in a 30-min continuous load test at lactate threshold: Kinetics, kinematics, and muscular activity in able-bodied participants},
  series = {European Journal of Applied Physiology},
  journal   = {European Journal of Applied Physiology},
  number    = {120},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1439-6327},
  doi       = {10.1007/s00421-020-04373-x},
  pages     = {1403 -- 1415},
  year      = {2020},
  abstract  = {Purpose This study aims to investigate the biomechanics of handcycling during a continuous load trial (CLT) to assess the mechanisms underlying fatigue in upper body exercise. Methods Twelve able-bodied triathletes performed a 30-min CLT at a power output corresponding to lactate threshold in a racing recumbent handcycle mounted on a stationary ergometer. During the CLT, ratings of perceived exertion (RPE), tangential crank kinetics, 3D joint kinematics, and muscular activity of ten muscles of the upper extremity and trunk were examined using motion capturing and surface electromyography. Results During the CLT, spontaneously chosen cadence and RPE increased, whereas crank torque decreased. Rotational work was higher during the pull phase. Peripheral RPE was higher compared to central RPE. Joint range of motion decreased for elbow-flexion and radial-duction. Integrated EMG (iEMG) increased in the forearm flexors, forearm extensors, and M. deltoideus (Pars spinalis). An earlier onset of activation was found for M. deltoideus (Pars clavicularis), M. pectoralis major, M. rectus abdominis, M. biceps brachii, and the forearm flexors. Conclusion Fatigue-related alterations seem to apply analogously in handcycling and cycling. The most distal muscles are responsible for force transmission on the cranks and might thus suffer most from neuromuscular fatigue. The findings indicate that peripheral fatigue (at similar lactate values) is higher in handcycling compared to leg cycling, at least for inexperienced participants. An increase in cadence might delay peripheral fatigue by a reduced vascular occlusion. We assume that the gap between peripheral and central fatigue can be reduced by sport-specific endurance training.},
  language  = {en}
}
@inproceedings{PohleFroehlichDalitzRichteretal.2020,
  author    = {Pohle-Fr{\"o}hlich, Regina and Dalitz, Christoph and Richter, Charlotte and Hahnen, Tobias and St{\"a}udle, Benjamin and Albracht, Kirsten},
  title     = {Estimation of muscle fascicle orientation in ultrasonic images},
  series = {Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 5},
  booktitle = {Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 5},
  publisher = {SciTePress},
  address   = {Set{\´u}bal, Portugal},
  isbn      = {978-989-758-402-2},
  doi       = {10.5220/0008933900790086},
  pages     = {79 -- 86},
  year      = {2020},
  abstract  = {We compare four different algorithms for automatically estimating the muscle fascicle angle from ultrasonic images: the vesselness filter, the Radon transform, the projection profile method and the gray level cooccurence matrix (GLCM). The algorithm results are compared to ground truth data generated by three different experts on 425 image frames from two videos recorded during different types of motion. The best agreement with the ground truth data was achieved by a combination of pre-processing with a vesselness filter and measuring the angle with the projection profile method. The robustness of the estimation is increased by applying the algorithms to subregions with high gradients and performing a LOESS fit through these estimates.},
  language  = {en}
}
@article{DantismRoehlenDahmenetal.2020,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Dahmen, Markus and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {LAPS-based monitoring of metabolic responses of bacterial cultures in a paper fermentation broth},
  series = {Sensors and Actuators B: Chemical},
  volume    = {320},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {Art. 128232},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2020.128232},
  year      = {2020},
  abstract  = {As an alternative renewable energy source, methane production in biogas plants is gaining more and more attention. Biomass in a bioreactor contains different types of microorganisms, which should be considered in terms of process-stability control. Metabolically inactive microorganisms within the fermentation process can lead to undesirable, time-consuming and cost-intensive interventions. Hence, monitoring of the cellular metabolism of bacterial populations in a fermentation broth is crucial to improve the biogas production, operation efficiency, and sustainability. In this work, the extracellular acidification of bacteria in a paper-fermentation broth is monitored after glucose uptake, utilizing a differential light-addressable potentiometric sensor (LAPS) system. The LAPS system is loaded with three different model microorganisms (Escherichia coli, Corynebacterium glutamicum, and Lactobacillus brevis) and the effect of the fermentation broth at different process stages on the metabolism of these bacteria is studied. In this way, different signal patterns related to the metabolic response of microorganisms can be identified. By means of calibration curves after glucose uptake, the overall extracellular acidification of bacterial populations within the fermentation process can be evaluated.},
  language  = {en}
}
@article{HueningDeMatteis2020,
  author    = {H{\"u}ning, Felix and De Matteis, Stefan},
  title     = {Entwicklung eines taktilen HMI f{\"u}r sehbehinderte und blinde Nutzerinnen und Nutzer},
  series = {Blind - sehbehindert},
  volume    = {140},
  journal   = {Blind - sehbehindert},
  number    = {2},
  publisher = {Edition Bentheim},
  address   = {W{\"u}rzburg},
  issn      = {0176-7836},
  pages     = {9 -- 19},
  year      = {2020},
  language  = {de}
}
@article{RichterWichernGroempingetal.2020,
  author    = {Richter, L. and Wichern, M. and Gr{\"o}mping, Markus and Robecke, U. and Haberkamp, J.},
  title     = {Ammonium recovery from process water of digested sludge dewatering by membrane contactors},
  series = {Water Practice and Technology},
  volume    = {15},
  journal   = {Water Practice and Technology},
  number    = {1},
  publisher = {IWA Publishing},
  address   = {London},
  issn      = {1751-231X},
  doi       = {10.2166/wpt.2020.002},
  pages     = {84 -- 91},
  year      = {2020},
  abstract  = {Membrane contactors are a promising alternative for nitrogen removal and recovery from process water compared to other physicochemical and biological sidestream treatment processes. M{\"u}nster wastewater treatment plant (WWTP) is the first municipal WWTP in Germany operating a full-scale membrane contactor system to improve the nitrogen elimination and recovery efficiency. Factors influencing the operation and membrane performance are investigated in an accompanying research project. Additional operational aspects of the applied membrane modules are investigated in detail using a bench-scale membrane contactor. First results of the full-scale application demonstrate a high nitrogen removal efficiency of >95\%.},
  language  = {de}
}
@article{MalikAbdievaUalievaetal.2019,
  author    = {Malik, A. M. and Abdieva, G. Zh. and Ualieva, P. S. and Zhubanova, A. A. and Temiz Artmann, Ayseg{\"u}l},
  title     = {CКPИНИНГ МИКPOOPГAНИЗМOВ-ДECТPУКТOPOВ XЛOРOPГAНИЧECКИX ЗAГPЯЗНИТEЛEЙ},
  series = {Eurasian Journal of Ecology},
  volume    = {61},
  journal   = {Eurasian Journal of Ecology},
  number    = {4},
  issn      = {2617-7358},
  pages     = {61 -- 71},
  year      = {2019},
  language  = {ru}
}
@article{SchmidtTurgutLeetal.2020,
  author    = {Schmidt, Aaron C. and Turgut, Hatice and Le, Dao and Beloqui, Ana and Delaittre, Guillaume},
  title     = {Making the best of it: nitroxide-mediated polymerization of methacrylates via the copolymerization approach with functional styrenics},
  series = {Polymer Chemistry},
  volume    = {11},
  journal   = {Polymer Chemistry},
  number    = {2},
  publisher = {Royal Society of Chemistry (RSC)},
  address   = {Cambridge},
  doi       = {10.1039/C9PY01458F},
  pages     = {593 -- 604},
  year      = {2020},
  abstract  = {The SG1-mediated solution polymerization of methyl methacrylate (MMA) and oligo(ethylene glycol) methacrylate (OEGMA, Mₙ = 300 g mol⁻¹) in the presence of a small amount of functional/reactive styrenic comonomer is investigated. Moieties such as pentafluorophenyl ester, triphenylphosphine, azide, pentafluorophenyl, halide, and pyridine are considered. A comonomer fraction as low as 5 mol\% typically results in a controlled/living behavior, at least up to 50\% conversion. Chain extensions with styrene for both systems were successfully performed. Variation of physical properties such as refractive index (for MMA) and phase transition temperature (for OEGMA) were evaluated by comparing to 100\% pure homopolymers. The introduction of an activated ester styrene derivative in the polymerization of OEGMA allows for the synthesis of reactive and hydrophilic polymer brushes with defined thickness. Finally, using the example of pentafluorostyrene as controlling comonomer, it is demonstrated that functional PMMA-b-PS are able to maintain a phase separation ability, as evidenced by the formation of nanostructured thin films.},
  language  = {en}
}
@article{KrollLudwigs2019,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Vernachl{\"a}ssigung des unionsrechtlichen Anerkennungsprinzips durch den BGH},
  series = {NJW Neue Juristische Wochenschrift},
  journal   = {NJW Neue Juristische Wochenschrift},
  number    = {32},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0341-1915},
  pages     = {2277 -- 2279},
  year      = {2019},
  language  = {de}
}
@article{RoethSlabuKessleretal.2019,
  author    = {Roeth, A.A. and Slabu, I. and Kessler, A. and Engelmann, Ulrich M.},
  title     = {Local treatment of pancreatic cancer with magnetic nanoparticles},
  series = {HPB},
  volume    = {21},
  journal   = {HPB},
  number    = {Supplement 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1365-182X},
  doi       = {10.1016/j.hpb.2019.10.959},
  pages     = {S868 -- S869},
  year      = {2019},
  language  = {en}
}
@article{WilbringEnningPfaffetal.2020,
  author    = {Wilbring, Daniela and Enning, Manfred and Pfaff, Raphael and Schmidt, Bernd},
  title     = {Neue Perspektiven f{\"u}r die Bahn in der Produktions- und Distributionslogistik durch Prozessautomation},
  series = {ETR - Eisenbahntechnische Rundschau},
  volume    = {69},
  journal   = {ETR - Eisenbahntechnische Rundschau},
  number    = {3},
  issn      = {0013-2845},
  pages     = {15 -- 19},
  year      = {2020},
  language  = {de}
}
@inproceedings{DinghoferHartung2020,
  author    = {Dinghofer, Kai and Hartung, Frank},
  title     = {Analysis of Criteria for the Selection of Machine Learning Frameworks},
  series = {2020 International Conference on Computing, Networking and Communications (ICNC)},
  booktitle = {2020 International Conference on Computing, Networking and Communications (ICNC)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ICNC47757.2020.9049650},
  pages     = {373 -- 377},
  year      = {2020},
  abstract  = {With the many achievements of Machine Learning in the past years, it is likely that the sub-area of Deep Learning will continue to deliver major technological breakthroughs [1]. In order to achieve best results, it is important to know the various different Deep Learning frameworks and their respective properties. This paper provides a comparative overview of some of the most popular frameworks. First, the comparison methods and criteria are introduced and described with a focus on computer vision applications: Features and Uses are examined by evaluating papers and articles, Adoption and Popularity is determined by analyzing a data science study. Then, the frameworks TensorFlow, Keras, PyTorch and Caffe are compared based on the previously described criteria to highlight properties and differences. Advantages and disadvantages are compared, enabling researchers and developers to choose a framework according to their specific needs.},
  language  = {en}
}
@article{WeldenSchoeningWagneretal.2020,
  author    = {Welden, Rene and Sch{\"o}ning, Michael Josef and Wagner, Patrick H. and Wagner, Torsten},
  title     = {Light-Addressable Electrodes for Dynamic and Flexible Addressing of Biological Systems and Electrochemical Reactions},
  series = {Sensors},
  volume    = {20},
  journal   = {Sensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s20061680},
  pages     = {Artikel 1680},
  year      = {2020},
  abstract  = {In this review article, we are going to present an overview on possible applications of light-addressable electrodes (LAE) as actuator/manipulation devices besides classical electrode structures. For LAEs, the electrode material consists of a semiconductor. Illumination with a light source with the appropiate wavelength leads to the generation of electron-hole pairs which can be utilized for further photoelectrochemical reaction. Due to recent progress in light-projection technologies, highly dynamic and flexible illumination patterns can be generated, opening new possibilities for light-addressable electrodes. A short introduction on semiconductor-electrolyte interfaces with light stimulation is given together with electrode-design approaches. Towards applications, the stimulation of cells with different electrode materials and fabrication designs is explained, followed by analyte-manipulation strategies and spatially resolved photoelectrochemical deposition of different material types.},
  language  = {en}
}
@article{KerresGredigkHoffmannJatheetal.2020,
  author    = {Kerres, Karsten and Gredigk-Hoffmann, Sylvia and Jathe, R{\"u}diger and Orlik, Stefan and Sariyildiz, Mustafa and Schmidt, Torsten and Sympher, Klaus-Jochen and Uhlenbroch, Adrian},
  title     = {Future approaches for sewer system condition assessment},
  series = {Water Practice \& Technology},
  journal   = {Water Practice \& Technology},
  number    = {15 (2)},
  publisher = {IWA Publishing},
  address   = {London},
  issn      = {1751-231X},
  doi       = {10.2166/wpt.2020.027},
  pages     = {386 -- 393},
  year      = {2020},
  abstract  = {Different analytical approaches exist to describe the structural substance or wear reserve of sewer systems. The aim is to convert engineering assessments of often complex defect patterns into computational algorithms and determine a substance class for a sewer section or manhole. This analytically determined information is essential for strategic rehabilitation planning processes up to network level, as it corresponds to the most appropriate rehabilitation type and can thus provide decision-making support. Current calculation methods differ clearly from each other in parts, so that substance classes determined by the different approaches are only partially comparable with each other. The objective of the German R\&D cooperation project 'SubKanS' is to develop a methodology for classifying the specific defect patterns resulting from the interaction of all the individual defects, and their severities and locations. The methodology takes into account the structural substance of sewer sections and manholes, based on real data and theoretical considerations analogous to the condition classification of individual defects. The result is a catalogue of defect patterns and characteristics, as well as associated structural substance classifications of sewer systems (substance classes). The methodology for sewer system substance classification is developed so that the classification of individual defects can be transferred into a substance class of the sewer section or manhole, eventually taking into account further information (e.g. pipe material, nominal diameter, etc.). The result is a validated methodology for automated sewer system substance classification.},
  language  = {en}
}
@article{Koehler2020,
  author    = {K{\"o}hler, Klemens},
  title     = {A conflict theory perspective of IT attacks - consequences for IT security education},
  number    = {Preprint},
  year      = {2020},
  abstract  = {Cyberspace is "the environment formed by physical and non-physical components to store, modify, and exchange data using computer networks" (NATO CCDCOE). Beyond that, it is an environment where people interact. IT attacks are hostile, non-cooperative interactions that can be described with conflict theory. Applying conflict theory to IT security leads to different objectives for end-user education, requiring different formats like agency-based competence developing games.},
  language  = {en}
}
@article{JildehKirchnerOberlaenderetal.2020,
  author    = {Jildeh, Zaid B. and Kirchner, Patrick and Oberl{\"a}nder, Jan and Vahidpour, Farnoosh and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Development of a package-sterilization process for aseptic filling machines: A numerical approach and validation for surface treatment with hydrogen peroxide},
  series = {Sensor and Actuators A: Physical},
  volume    = {303},
  journal   = {Sensor and Actuators A: Physical},
  number    = {111691},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-4247},
  doi       = {10.1016/j.sna.2019.111691},
  year      = {2020},
  abstract  = {Within the present work a sterilization process by a heated gas mixture that contains hydrogen peroxide (H₂O₂) is validated by experiments and numerical modeling techniques. The operational parameters that affect the sterilization efficacy are described alongside the two modes of sterilization: gaseous and condensed H₂O₂. Measurements with a previously developed H₂O₂ gas sensor are carried out to validate the applied H₂O₂ gas concentration during sterilization. We performed microbiological tests at different H₂O₂ gas concentrations by applying an end-point method to carrier strips, which contain different inoculation loads of Geobacillus stearothermophilus spores. The analysis of the sterilization process of a pharmaceutical glass vial is performed by numerical modeling. The numerical model combines heat- and advection-diffusion mass transfer with vapor-pressure equations to predict the location of condensate formation and the concentration of H₂O₂ at the packaging surfaces by changing the gas temperature. For a sterilization process of 0.7 s, a H₂O₂ gas concentration above 4\% v/v is required to reach a log-count reduction above six. The numerical results showed the location of H₂O₂ condensate formation, which decreases with increasing sterilant-gas temperature. The model can be transferred to different gas nozzle- and packaging geometries to assure the absence of H₂O₂ residues.},
  language  = {en}
}
@inproceedings{KreyerMuellerEsch2020,
  author    = {Kreyer, J{\"o}rg and M{\"u}ller, Marvin and Esch, Thomas},
  title     = {A Map-Based Model for the Determination of Fuel Consumption for Internal Combustion Engines as a Function of Flight Altitude},
  publisher = {DGLR},
  address   = {Bonn},
  doi       = {10.25967/490162},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {In addition to very high safety and reliability requirements, the design of internal combustion engines (ICE) in aviation focuses on economic efficiency. The objective must be to design the aircraft powertrain optimized for a specific flight mission with respect to fuel consumption and specific engine power. Against this background, expert tools provide valuable decision-making assistance for the customer. In this paper, a mathematical calculation model for the fuel consumption of aircraft ICE is presented. This model enables the derivation of fuel consumption maps for different engine configurations. Depending on the flight conditions and based on these maps, the current and the integrated fuel consumption for freely definable flight emissions is calculated. For that purpose, an interpolation method is used, that has been optimized for accuracy and calculation time. The mission boundary conditions flight altitude and power requirement of the ICE form the basis for this calculation. The mathematical fuel consumption model is embedded in a parent program. This parent program presents the simulated fuel consumption by means of an example flight mission for a representative airplane. The focus of the work is therefore on reproducing exact consumption data for flight operations. By use of the empirical approaches according to Gagg-Farrar [1] the power and fuel consumption as a function of the flight altitude are determined. To substantiate this approaches, a 1-D ICE model based on the multi-physical simulation tool GT-Suite® has been created. This 1-D engine model offers the possibility to analyze the filling and gas change processes, the internal combustion as well as heat and friction losses for an ICE under altitude environmental conditions. Performance measurements on a dynamometer at sea level for a naturally aspirated ICE with a displacement of 1211 ccm used in an aviation aircraft has been done to validate the 1-D ICE model. To check the plausibility of the empirical approaches with respect to the fuel consumption and performance adjustment for the flight altitude an analysis of the ICE efficiency chain of the 1-D engine model is done. In addition, a comparison of literature and manufacturer data with the simulation results is presented.},
  language  = {en}
}
@book{BuchholtzBarnatBosseetal.2019,
  author    = {Buchholtz, Nils and Barnat, Miriam and Bosse, Elke and Heemsoth, Tim and Vorh{\"o}lter, Katrin and Wibowo, Jonas},
  title     = {Praxistransfer in der terti{\"a}ren Bildungsforschung: Modelle, Gelingensbedingungen und Nachhaltigkeit},
  publisher = {Hamburg University Press},
  address   = {Hamburg},
  isbn      = {978-3-943423-72-3},
  pages     = {232 Seiten},
  year      = {2019},
  language  = {de}
}
@inproceedings{HingleyDikta2019,
  author    = {Hingley, Peter and Dikta, Gerhard},
  title     = {Finding a well performing box-jenkins forecasting model for annualised patent filings counts},
  series = {International Symposium on Forecasting, Thessaloniki, Greece, June 2019},
  booktitle = {International Symposium on Forecasting, Thessaloniki, Greece, June 2019},
  pages     = {24 Folien},
  year      = {2019},
  language  = {en}
}
@article{AttarMerkKotliaretal.2019,
  author    = {Attar, Mandana Hossein Zadeh and Merk, Hans F. and Kotliar, Konstantin and Wurpts, Gerda and R{\"o}seler, Stefani and Moll-Slodowy, Silke and Plange, Johann and Baron, Jens Malte and Balakirski, Galina},
  title     = {The CD63 basophil activation test as a diagnostic tool for assessing autoimmunity in patients with chronic spontaneous urticaria},
  series = {European Journal of Dermatology},
  volume    = {29},
  journal   = {European Journal of Dermatology},
  number    = {6},
  doi       = {10.1684/ejd.2019.3680},
  pages     = {614 -- 618},
  year      = {2019},
  language  = {en}
}
@incollection{AzatKerimkulovaMansurovetal.2020,
  author    = {Azat, Seitkhan and Kerimkulova, Almagul R. and Mansurov, Zulkhair A. and Adekenov, Sergazy and Artmann, Gerhard},
  title     = {The Use of Fusicoccin as Anticancer Compound},
  series = {Carbon Nanomaterials in Biomedicine and the Environment},
  booktitle = {Carbon Nanomaterials in Biomedicine and the Environment},
  publisher = {Jenny Stanford Publishing},
  address   = {New York},
  isbn      = {978-0-429-42864-7},
  doi       = {10.1201/9780429428647-8},
  pages     = {149 -- 172},
  year      = {2020},
  abstract  = {The problem of creation and use of sorption materials is of current interest for the practice of the modern medicine and agriculture. Practical importance is production of a biostimulant using a carbon sorbent for a significant increase in productivity, which is very relevant for the regions of Kazakhstan. It is known that a plant phytohormone—fusicoccin—in nanogram concentrations transforms cancer cells to the state of apoptosis. In this regard, there is a scientific practical interest in the development of a highly efficient method for producing fusicoccin from extract of germinated wheat seeds. According to the results of computer modeling, cleaning composite components of fusicoccin using microporous carbon adsorbents not suitable as the size of the molecule of fusicoccin more than micropores and the optimum pore size for purification of constituents of fusicoccin was determined by computer simulation.},
  language  = {en}
}
@article{CosmaKesslerGebhardtetal.2020,
  author    = {Cosma, Cosmin and Kessler, Julia and Gebhardt, Andreas and Campbell, Ian and Balc, Nicolae},
  title     = {Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1944},
  doi       = {10.3390/ma13040905},
  pages     = {1 -- 18},
  year      = {2020},
  abstract  = {To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10\% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250-1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20\% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.},
  language  = {en}
}
@article{Pietsch2015,
  author    = {Pietsch, Wolfram},
  title     = {Augmenting voice of the customer analysis by analysis of belief},
  series = {QFD-Forum},
  journal   = {QFD-Forum},
  number    = {30},
  issn      = {1431-6951},
  pages     = {1 -- 5},
  year      = {2015},
  language  = {en}
}