@article{SchulzeFeyerlPischinger2023,
  author    = {Schulze, Sven and Feyerl, G{\"u}nter and Pischinger, Stefan},
  title     = {Advanced ECMS for hybrid electric heavy-duty trucks with predictive battery discharge and adaptive operating strategy under real driving conditions},
  series = {Energies},
  volume    = {16},
  journal   = {Energies},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en16135171},
  pages     = {29 Seiten, Art. Nr.: 5171},
  year      = {2023},
  abstract  = {To fulfil the CO2 emission reduction targets of the European Union (EU), heavy-duty (HD) trucks need to operate 15\% more efficiently by 2025 and 30\% by 2030. Their electrification is necessary as conventional HD trucks are already optimized for the long-haul application. The resulting hybrid electric vehicle (HEV) truck gains most of the fuel saving potential by the recuperation of potential energy and its consecutive utilization. The key to utilizing the full potential of HEV-HD trucks is to maximize the amount of recuperated energy and ensure its intelligent usage while keeping the operating point of the internal combustion engine as efficient as possible. To achieve this goal, an intelligent energy management strategy (EMS) based on ECMS is developed for a parallel HEV-HD truck which uses predictive discharge of the battery and adaptive operating strategy regarding the height profile and the vehicle mass. The presented EMS can reproduce the global optimal operating strategy over long phases and lead to a fuel saving potential of up to 2\% compared with a heuristic strategy. Furthermore, the fuel saving potential is correlated with the investigated boundary conditions to deepen the understanding of the impact of intelligent EMS for HEV-HD trucks.},
  language  = {en}
}
@inproceedings{PompSchwarzboezlKolletal.2010,
  author    = {Pomp, Stefan and Schwarzb{\"o}zl, Peter and Koll, Gerrit and Hennecke, Klaus and Schmitz, Mark and Hoffschmidt, Bernhard},
  title     = {Advanced concept for a solar thermal power plant with open volumetric air receiver},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {97 -- 98},
  year      = {2010},
  language  = {en}
}
@book{SanderRoy2002,
  author    = {Sander, Volker and Roy, Alain},
  title     = {Advance Reservation API / Roy, Alain ; Sander, Volker},
  publisher = {Global Grid Forum},
  pages     = {26 S.},
  year      = {2002},
  language  = {en}
}
@article{WiesenTippkoetterMuffleretal.2014,
  author    = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Nils and Ulber, Roland},
  title     = {Adsorptive Vorbehandlung von Rohglycerin f{\"u}r die 1,3-Propandiol Fermentation mit Clostridium diolis},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/cite.201300080},
  pages     = {129 -- 135},
  year      = {2014},
  abstract  = {Bei der Gewinnung von Fetts{\"a}uren aus Pflanzen{\"o}len, z. B. zur Herstellung von Biopolymeren, oder bei der Biodiesel- und Seifenproduktion, f{\"a}llt Glycerin als Nebenprodukt an. Bei der Biokonversion dieses Rohstoffes zu 1,3-Propandiol wird der Produktionsorganismus Clostridium diolis durch Verunreinigungen im Rohglycerin gehemmt. Als inhibierende Substanzen konnten freie Fetts{\"a}uren identifiziert werden. Mithilfe eines adsorptiven Aufarbeitungsverfahrens ist es gelungen, die Fetts{\"a}uren zu entfernen und die Konversionseffizienz zu 1,3-Propandiol zu erh{\"o}hen.},
  language  = {de}
}
@misc{TippkoetterStaubSohlingetal.2012,
  author    = {Tippk{\"o}tter, Nils and Staub, C. and Sohling, U. and Ruf, N. and Ulber, Roland},
  title     = {Adsorptive Aufreinigung von Molkeproteinen},
  series = {Chemie Ingenieur Technik},
  volume    = {84},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201250395},
  pages     = {1285},
  year      = {2012},
  abstract  = {In der Molkeverarbeitung dominieren Membranfiltrationsverfahren die Prozessf{\"u}hrung. Hierbei werden {\"u}blicherweise Aufkonzentrierungen der Proteine und deren Trennung von dem Milchzucker Lactose durchgef{\"u}hrt. Der Prozess der adsorptiven Aufreinigung soll als kosteng{\"u}nstige Alternative zu den bisher gebr{\"a}uchlichen Verfahren dienen. Weiterhin er{\"o}ffnet sich durch das Verfahren die M{\"o}glichkeit, einzelne Proteinfraktionen w{\"a}hrend der Verarbeitung anzureichern. Als Proteinquellen wurden f{\"u}r die Untersuchungen Modellproteine, L{\"o}sungen aus Molkenproteinisolat, D{\"u}nnmolke und Molkekonzentrat verwendet. Die Eignung zur Proteinbindung wurden an Tonmaterialien, Silicaten und y-Aluminiumoxiden in Pulverform, in Form von Granulaten sowie Extrudaten als auch sph{\"a}rischen Partikeln {\"u}berpr{\"u}ft. Adsorbentien aus Bentonit/Silica und c-Aluminiumoxid k{\"o}nnen sowohl a-Lactalbumin (aLA) als auch b-Lactoglobulin (bLG) binden, wohingegen Materialien aus Siliciumoxid lediglich ein starkes Adsorptionsverhalten gegen{\"u}ber bLG zeigen. Mischmaterialien aus Siliciumoxid und a-Aluminiumoxid zeigen dasselbe Verhalten wie Materialien aus Siliciumoxid, weisen jedoch eine geringere Kapazit{\"a}t auf. Die Materialen wurden hinsichtlich ihres Einsatzes in chromatographischen Verfahren und Batch-Prozessen untersucht und ein Prozessentwurf f{\"u}r einen zweistufigen Batch-Prozess im R{\"u}hrkessel erarbeitet.},
  language  = {de}
}
@article{WiesenTippkoetterMuffleretal.2015,
  author    = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Adsorption of fatty acids to layered double hydroxides in aqueous systems},
  series = {Adsorption},
  volume    = {21},
  journal   = {Adsorption},
  number    = {6-7},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {459 -- 466},
  year      = {2015},
  abstract  = {Due to their anion exchange characteristics, layered double hydroxides (LDHs) are suitable for the detoxification of aqueous, fatty acid containing fermentation substrates. The aim of this study is to examine the adsorption mechanism, using crude glycerol from plant oil esterification as a model system. Changes in the intercalation structure in relation to the amount of fatty acids adsorbed are monitored by X-ray diffraction and infra-red spectroscopy. Additionally, calcination of LDH is investigated in order to increase the binding capacity for fatty acids. Our data propose that, at ambient temperature, fatty acids can be bound to the hydrotalcite by adsorption or in addition by intercalation, depending on fatty acid concentration. The adsorption of fatty acids from crude glycerol shows a BET-like behavior. Above a fatty acid concentration of 3.5 g L-1, intercalation of fatty acids can be shown by the appearance of an increased interlayer spacing. This observation suggests a two phase adsorption process. Calcination of LDHs allows increasing the binding capacity for fatty acids by more than six times, mainly by reduction of structural CO32-.},
  language  = {en}
}
@article{KozhalakovaZhubanovaMansurovetal.2010,
  author    = {Kozhalakova, A. A. and Zhubanova, Azhar A. and Mansurov, Z. A. and Digel, Ilya and Tazhibayeva, S. M. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice shell},
  series = {Science of Central Asia (2010)},
  journal   = {Science of Central Asia (2010)},
  pages     = {50 -- 54},
  year      = {2010},
  language  = {en}
}
@article{AkimbekovDigelOHerasetal.2014,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and O´Heras, C. and Tastambek, K.T. and Savitskaya, I.S. and Ualyeva, P.S. and Mansurov, Z.A. and Zhubanova, A.A.},
  title     = {Adsorption of bacterial lipopolysaccharides on carbonized rice husks obtained in the batch experiments},
  series = {Experimental Biology},
  volume    = {60},
  journal   = {Experimental Biology},
  number    = {1/2},
  publisher = {Al-Farabi Kazakh National University},
  address   = {Almaty},
  issn      = {1563-0218},
  pages     = {144 -- 148},
  year      = {2014},
  abstract  = {The scope of this study is the measurement of endotoxin adsorption rate for carbonized rice husk. It showed good adsorption properties for LPS. During the batch experiments, several techniques were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics.},
  language  = {en}
}
@article{AkimbekovDigelO’Herasetal.2015,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and O'Heras, C. and Tastambek, K.T. and Savitskaya, I.S. and Ualyeva, P.S. and Mansurov, Z.A. and Zhubanova, A.A.},
  title     = {Adsorption of bacterial lipopol ysaccharides on carbonized ri ce husks obtained in the batch experiments},
  series = {KazNU Bulletin. Biology series},
  volume    = {60},
  journal   = {KazNU Bulletin. Biology series},
  number    = {No 1/2},
  issn      = {1563-0218},
  pages     = {144 -- 148},
  year      = {2015},
  language  = {en}
}
@article{LauthChristmannSchwarz1990,
  author    = {Lauth, Jakob and Christmann, K. and Schwarz, E.},
  title     = {Adsorption geometry of H on RU(1010) image as determined by LEED and HREELS / Christmann, K. ; Lauth, G. ; Schwarz, E.},
  series = {Vacuum. 41 (1990), H. 1-3},
  journal   = {Vacuum. 41 (1990), H. 1-3},
  isbn      = {0042-207X},
  pages     = {293 -- 296},
  year      = {1990},
  language  = {en}
}
@article{SelmerBrueserDahl2000,
  author    = {Selmer, Thorsten and Br{\"u}ser, Thomas and Dahl, Christiane},
  title     = {ADP Sulfurylase" from Thiobacillus denitrificans Is an Adenylylsulfate:Phosphate Adenylyltransferase and Belongs to a New Family of Nucleotidyltransferases / Br{\"u}ser, Thomas ; Selmer, Thorsten ; Dahl, Christiane},
  series = {Journal of Biological Chemistry. 275 (2000), H. 3},
  journal   = {Journal of Biological Chemistry. 275 (2000), H. 3},
  isbn      = {1083-351X},
  pages     = {1691 -- 1690},
  year      = {2000},
  language  = {en}
}
@inproceedings{EggertStanke2020,
  author    = {Eggert, Mathias and Stanke, Max-Alexander},
  title     = {Adoption of Integrated Voice Assistants in Health Care- Requirements and Design Guidelines},
  publisher = {GITO},
  address   = {Berlin},
  doi       = {10.30844/wi_2020_k2-eggert},
  pages     = {16 Seiten},
  year      = {2020},
  abstract  = {Integrated voice assistants (IVA) receive more and more attention and are widespread for entertainment use cases, such as radio hearing or web searches. At the same time, the health care segment suffers in process inefficiency and missing staff, whereas the usage of IVA has the potential to improve caring processes and patient satisfaction. By applying a design science approach and based on a qualitative study, we identify IVA requirements, barriers and design guidelines for the health care sector. The results reveal three important IVA functions: the ability to set appointments with care service staff, the documentation of health history and the communication with service staff. Integration, system stability and volume control are the most important nonfunctional requirements. Based on the interview results and project experiences, six design and implementation guidelines are derived.},
  language  = {en}
}
@article{KaemperPicardSchuetzeetal.2006,
  author    = {K{\"a}mper, Klaus-Peter and Picard, A. and Sch{\"u}tze, A. and Wallach, D.},
  title     = {Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; K{\"a}mper, K.-P.; Sch{\"u}tze, A.; Wallach, D.; Walter, T.},
  series = {Mst-News (2006)},
  journal   = {Mst-News (2006)},
  isbn      = {0948-3128},
  pages     = {15, 16 -- u. 35},
  year      = {2006},
  language  = {en}
}
@article{FredebeulKrein2003,
  author    = {Fredebeul-Krein, Markus},
  title     = {Adopting a coherent institutional framework for the Ukrainian telecom sector: Lessons to be learnt from European and German experience},
  series = {Zerkalo Nedeli (2003)},
  journal   = {Zerkalo Nedeli (2003)},
  year      = {2003},
  language  = {en}
}
@article{KetelhutKolditzGoelletal.2019,
  author    = {Ketelhut, Maike and Kolditz, Melanie and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Admittance control of an industrial robot during resistance training},
  series = {IFAC-PapersOnLine},
  volume    = {52},
  journal   = {IFAC-PapersOnLine},
  number    = {19},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8963},
  doi       = {10.1016/j.ifacol.2019.12.102},
  pages     = {223 -- 228},
  year      = {2019},
  abstract  = {Neuromuscular strength training of the leg extensor muscles plays an important role in the rehabilitation and prevention of age and wealth related diseases. In this paper, we focus on the design and implementation of a Cartesian admittance control scheme for isotonic training, i.e. leg extension and flexion against a predefined weight. For preliminary testing and validation of the designed algorithm an experimental research and development platform consisting of an industrial robot and a force plate mounted at its end-effector has been used. Linear, diagonal and arbitrary two-dimensional motion trajectories with different weights for the leg extension and flexion part are applied. The proposed algorithm is easily adaptable to trajectories consisting of arbitrary six-dimensional poses and allows the implementation of individualized trajectories.},
  language  = {en}
}
@article{TemizArtmannAkhisarogluSercanetal.2005,
  author    = {Temiz Artmann, Ayseg{\"u}l and Akhisaroglu, M. and Sercan, Z. and Kayatekin, B. M.},
  title     = {Adhesion of Erythrocytes to Endothelial Cells After Acute Exercise: Differences in Red Blood Cells from Juvenile and Adult Rats. Temiz Artmann, A.; Akhisaroglu, M.; Sercan, Z.; Kayatekin, BM.; Yorukoglu, K.; Kirkali, G.},
  series = {Physiological Research (2005)},
  journal   = {Physiological Research (2005)},
  isbn      = {0862-8408},
  year      = {2005},
  language  = {en}
}
@inproceedings{FateriGebhardtGabriellietal.2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Großmann, Agnes and Schnauffer, Peter and Middendorf, Peter},
  title     = {Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant},
  series = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces},
  series = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  booktitle = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  pages     = {9 S.},
  year      = {2015},
  abstract  = {The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive manufacturing of drainage segments for cooling system of crucible melting furnaces},
  series = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  booktitle = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0196-6219},
  doi       = {10.1002/9781119211662.ch14},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5},
  journal   = {Physics Procedia},
  number    = {2},
  isbn      = {1875-3892},
  pages     = {543 -- 549},
  year      = {2010},
  language  = {en}
}
@inproceedings{GebhardtRitzSiekmannetal.2014,
  author    = {Gebhardt, Andreas and Ritz, Thomas and Siekmann, Kirsten and Wallenborn, Ramona},
  title     = {Additive manufacturing businesses in the process chain of individualized mass products},
  series = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  booktitle = {DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference},
  editor    = {Demmer, Axel},
  publisher = {Fraunhofer},
  address   = {Stuttgart},
  isbn      = {978-3-8396-9128-1 (E-Book)},
  year      = {2014},
  language  = {en}
}
@book{GebhardtHoetter2016,
  author    = {Gebhardt, Andreas and H{\"o}tter, Jan-Steffen},
  title     = {Additive manufacturing : 3D printing for prototyping and manufacturing},
  publisher = {Hanser Publishers},
  address   = {Munich},
  isbn      = {978-1-56990-582-1 ; 978-1-56990-583-8},
  pages     = {591 S.},
  year      = {2016},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Additive manufactured mechanical disentanglement lock},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {12},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147},
  year      = {2015},
  language  = {en}
}
@book{Gebhardt2016,
  author    = {Gebhardt, Andreas},
  title     = {Additive Fertigungsverfahren : Additive Manufacturing und 3D-Drucken f{\"u}r Prototyping - Tooling - Produktion},
  edition   = {5. aktualisierte und erweiterte Auflage},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-44401-0 ; 978-3-446-44539-0},
  doi       = {10.3139/9783446445390},
  pages     = {XXIV, 711 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2016},
  language  = {de}
}
@article{KaulKoshkaryevArtmannetal.2008,
  author    = {Kaul, D. K. and Koshkaryev, A. and Artmann, Gerhard and Barshtein, G. and Yedgar, S.},
  title     = {Additive effect of red blood cell rigidity and adherence to endothelial cells in inducing vascular resistance},
  series = {American Journal of Physiology : Heart and Circulation Physiology . 295 (2008), H. 4},
  volume    = {295},
  journal   = {American Journal of Physiology : Heart and Circulation Physiology . 295 (2008), H. 4},
  number    = {4},
  issn      = {1522-1539},
  pages     = {H1788 -- H1793},
  year      = {2008},
  language  = {en}
}
@article{AtlasBrealeyDharetal.2012,
  author    = {Atlas, Glen and Brealey, David and Dhar, Sunil and Dikta, Gerhard and Singer, Meryvn},
  title     = {Additional hemodynamic measurements with an esophageal Doppler monitor: a preliminary report of compliance, force, kinetic energy, and afterload in the clinical setting},
  series = {Journal of clinical monitoring and computing},
  journal   = {Journal of clinical monitoring and computing},
  number    = {26},
  publisher = {Springer Nature},
  address   = {London},
  isbn      = {1573-2614},
  doi       = {10.1007/s10877-012-9386-5},
  pages     = {473 -- 482},
  year      = {2012},
  abstract  = {The esophageal Doppler monitor (EDM) is a minimally-invasive hemodynamic device which evaluates both cardiac output (CO), and fluid status, by estimating stroke volume (SV) and calculating heart rate (HR). The measurement of these parameters is based upon a continuous and accurate approximation of distal thoracic aortic blood flow. Furthermore, the peak velocity (PV) and mean acceleration (MA), of aortic blood flow at this anatomic location, are also determined by the EDM. The purpose of this preliminary report is to examine additional clinical hemodynamic calculations of: compliance (C), kinetic energy (KE), force (F), and afterload (TSVRi). These data were derived using both velocity-based measurements, provided by the EDM, as well as other contemporaneous physiologic parameters. Data were obtained from anesthetized patients undergoing surgery or who were in a critical care unit. A graphical inspection of these measurements is presented and discussed with respect to each patient's clinical situation. When normalized to each of their initial values, F and KE both consistently demonstrated more discriminative power than either PV or MA. The EDM offers additional applications for hemodynamic monitoring. Further research regarding the accuracy, utility, and limitations of these parameters is therefore indicated.},
  language  = {en}
}
@book{Matcha2007,
  author    = {Matcha, Heike},
  title     = {Add-on : vorgefertigte Einheiten zur Erweiterung von Geschosswohnungsbauten ; Forschungsprojekt Sommersemester 2007},
  publisher = {Technische Universit{\"a}t Darmstadt},
  address   = {Darmstadt},
  isbn      = {3-9808079-9-1},
  pages     = {160 S. : {\"u}berw. Ill.},
  year      = {2007},
  language  = {de}
}
@article{EnningStuetzleViereck2006,
  author    = {Enning, Manfred and St{\"u}tzle, T. and Viereck, U.},
  title     = {Adaptiver Gleitschutz f{\"u}r Schienenfahrzeuge / St{\"u}tzle, T. ; Viereck, U. ; Enning, M. ; Rulka, W. ; Stribersky, A. ; Abel, D.},
  series = {Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schr{\"o}ppel},
  journal   = {Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schr{\"o}ppel},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {3-8007-2979-2},
  pages     = {401 -- 406},
  year      = {2006},
  language  = {de}
}
@article{EnningStuetzleVierecketal.2006,
  author    = {Enning, Manfred and St{\"u}tzle, Thorsten and Viereck, Uwe and Stribersky, Anton},
  title     = {Adaptiver Gleitschutz f{\"u}r Schienenfahrzeuge (Adaptive Wheelslide Protection System for Railway Vehicles) / St{\"u}tzle, Thorsten ; Viereck, Uwe ; Enning, Manfred ; Stribersky, Anton ; Rulka, Wolfgang},
  series = {at - Automatisierungstechnik . 54 (2006), H. 3},
  journal   = {at - Automatisierungstechnik . 54 (2006), H. 3},
  isbn      = {0178-2312},
  pages     = {139 -- 148},
  year      = {2006},
  language  = {de}
}
@inproceedings{UlmerBraunWollert2021,
  author    = {Ulmer, Jessica and Braun, Sebastian and Wollert, J{\"o}rg},
  title     = {Adaptive VR-Produktionsumgebungen f{\"u}r Evaluations- und Schulungst{\"a}tigkeiten},
  series = {Automation 2021: Navigating towards resilient Production},
  booktitle = {Automation 2021: Navigating towards resilient Production},
  publisher = {VDI},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092392-5},
  issn      = {0083-5560},
  doi       = {10.51202/9783181023921-55},
  pages     = {55 -- 64},
  year      = {2021},
  abstract  = {Industrie 4.0 stellt viele Herausforderungen an produzierende Unternehmen und ihre Besch{\"a}f-tigten. Innovative und effektive Trainingsstrategien sind erforderlich, um mit den sich schnell ver{\"a}ndernden Produktionsumgebungen und neuen Fertigungstechnologien Schritt halten zu k{\"o}nnen. Virtual Reality (VR) bietet neue M{\"o}glichkeiten f{\"u}r On-the-Job, On-Demand- und Off-Premise-Schulungen. Diese Arbeit stellt ein neues VR Schulungssystem vor, welches sich flexible an unterschiedliche Trainingsobjekte auf Grundlage von Rezepten und CAD Modellen anpassen l{\"a}sst. Das Konzept basiert auf gerichteten azyklischen Graphen und einem Level-system. Es erm{\"o}glicht eine benutzerindividuelle Lerngeschwindigkeit mittels visueller Ele-mente. Das Konzept wurde f{\"u}r einen mechanischen Anwendungsfall mit Industriekomponen-ten implementiert und in der Industrie 4.0-Modellfabrik der FH Aachen umgesetzt.},
  language  = {de}
}
@article{MertensHenke2001,
  author    = {Mertens, Josef and Henke, Rolf},
  title     = {Adaptive technologies for future civil air transport},
  series = {Air \& Space Europe. 3 (2001), H. 3-4},
  journal   = {Air \& Space Europe. 3 (2001), H. 3-4},
  isbn      = {1247-5793},
  pages     = {80 -- 82},
  year      = {2001},
  language  = {en}
}
@inproceedings{SiekmannMueller2011,
  author    = {Siekmann, Thomas and M{\"u}ller, Karsten},
  title     = {Adaptive potential of the stormwater management in urban areas faced by the climate change},
  series = {12th International Conference on Urban Drainage, Porto Alegre/Brazil, 11-16 September 2011},
  booktitle = {12th International Conference on Urban Drainage, Porto Alegre/Brazil, 11-16 September 2011},
  pages     = {9 S.},
  year      = {2011},
  language  = {en}
}
@article{SchuhKampkerHoehne2006,
  author    = {Schuh, G. and Kampker, A. and H{\"o}hne, Tim},
  title     = {Adaptive Logistik - Selbststeuerung in Fertigung und Montage},
  series = {wt Werkstattstechnik online},
  volume    = {96},
  journal   = {wt Werkstattstechnik online},
  number    = {5},
  issn      = {1436-4980},
  pages     = {321 -- 324},
  year      = {2006},
  language  = {de}
}
@article{SchuhHoehneHessler2008,
  author    = {Schuh, G{\"u}nther and H{\"o}hne, Tim and Heßler, Stefan},
  title     = {Adaptive Logistik : Informationsmanagement in der Standplatzmontage},
  series = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe},
  journal   = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe},
  pages     = {248 -- 255},
  year      = {2008},
  language  = {de}
}
@inproceedings{SchuhGottschalkNarretal.2007,
  author    = {Schuh, G{\"u}nther and Gottschalk, Sebastian Friedrich and Narr, Claus and H{\"o}hne, Tim},
  title     = {Adaptive logistics : information management for planning and control of small series assembly},
  series = {2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts},
  booktitle = {2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts},
  editor    = {Z{\"a}h, Michael F.},
  isbn      = {978-0-9783187-0-3},
  pages     = {212 -- 221},
  year      = {2007},
  language  = {en}
}
@article{KetelhutBrueggeGoelletal.2020,
  author    = {Ketelhut, Maike and Br{\"u}gge, G. M. and G{\"o}ll, Fabian and Braunstein, Bjoern and Albracht, Kirsten and Abel, Dirk},
  title     = {Adaptive iterative learning control of an industrial robot during neuromuscular training},
  series = {IFAC PapersOnLine},
  volume    = {53},
  journal   = {IFAC PapersOnLine},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8963},
  doi       = {10.1016/j.ifacol.2020.12.741},
  pages     = {16468 -- 16475},
  year      = {2020},
  abstract  = {To prevent the reduction of muscle mass and loss of strength coming along with the human aging process, regular training with e.g. a leg press is suitable. However, the risk of training-induced injuries requires the continuous monitoring and controlling of the forces applied to the musculoskeletal system as well as the velocity along the motion trajectory and the range of motion. In this paper, an adaptive norm-optimal iterative learning control algorithm to minimize the knee joint loadings during the leg extension training with an industrial robot is proposed. The response of the algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee and compared to the results of a higher-order iterative learning control algorithm, a robust iterative learning control and a recently proposed conventional norm-optimal iterative learning control algorithm. Although significant improvements in performance are made compared to the conventional norm-optimal iterative learning control algorithm with a small learning factor, for the developed approach as well as the robust iterative learning control algorithm small steady state errors occur.},
  language  = {en}
}
@inproceedings{SchulzeMuehleisenFeyerl2018,
  author    = {Schulze, Sven and M{\"u}hleisen, M. and Feyerl, G{\"u}nter},
  title     = {Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology},
  series = {18. Internationales Stuttgarter Symposium. Proceedings},
  booktitle = {18. Internationales Stuttgarter Symposium. Proceedings},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-21194-3},
  pages     = {75 -- 89},
  year      = {2018},
  language  = {en}
}
@inproceedings{KallweitTedjasukmanaKorculanin2013,
  author    = {Kallweit, Stephan and Tedjasukmana, O. and Korculanin, O.},
  title     = {Adaption und Implementierung eines 3D-PIV Algorithmus auf massiv paralleler Hardware},
  series = {Lasermethoden in der Str{\"o}mungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, M{\"u}nchen},
  booktitle = {Lasermethoden in der Str{\"o}mungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, M{\"u}nchen},
  editor    = {K{\"a}hler, Christian J.},
  publisher = {GALA},
  address   = {Karlsruhe},
  isbn      = {978-3-9805613-9-6},
  pages     = {Sitzung 4, Vortrag 16},
  year      = {2013},
  language  = {de}
}
@inproceedings{DammRitzStrauch2011,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Adaption of archetype patterns for mobile cloud-based business apps},
  series = {2011 IEEE International Conference on Pervasive Computing and Communications workshops (PerCom workshops 2011) : Seattle, Washington, USA, 21 - 25 March 2011},
  booktitle = {2011 IEEE International Conference on Pervasive Computing and Communications workshops (PerCom workshops 2011) : Seattle, Washington, USA, 21 - 25 March 2011},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-938-6 (Print)},
  doi       = {10.1109/PERCOMW.2011.5766849},
  pages     = {100 -- 105},
  year      = {2011},
  language  = {en}
}
@inproceedings{UlmerBraunChengetal.2021,
  author    = {Ulmer, Jessica and Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Adapting augmented reality systems to the users' needs using gamification and error solving methods},
  series = {Procedia CIRP - 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0},
  volume    = {104},
  booktitle = {Procedia CIRP - 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2021.11.024},
  pages     = {140 -- 145},
  year      = {2021},
  abstract  = {Animations of virtual items in AR support systems are typically predefined and lack interactions with dynamic physical environments. AR applications rarely consider users' preferences and do not provide customized spontaneous support under unknown situations. This research focuses on developing adaptive, error-tolerant AR systems based on directed acyclic graphs and error resolving strategies. Using this approach, users will have more freedom of choice during AR supported work, which leads to more efficient workflows. Error correction methods based on CAD models and predefined process data create individual support possibilities. The framework is implemented in the Industry 4.0 model factory at FH Aachen.},
  language  = {en}
}
@article{ArampatzisKaramanidisAlbracht2007,
  author    = {Arampatzis, Adamantios and Karamanidis, Kiros and Albracht, Kirsten},
  title     = {Adaptational responses of the human Achilles tendon by modulation of the applied cyclic strain magnitude},
  series = {Journal of Experimental Biology},
  volume    = {210},
  journal   = {Journal of Experimental Biology},
  number    = {15},
  issn      = {0022-0949},
  doi       = {10.1242/jeb.003814},
  pages     = {2743 -- 2753},
  year      = {2007},
  language  = {en}
}
@article{RitzStender2004,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Ad-hoc Anwendungsintegration mit mobilen CRM-Systement},
  series = {Electronic Business : Innovationen, Anwendungen und Technologien},
  journal   = {Electronic Business : Innovationen, Anwendungen und Technologien},
  editor    = {Weisbecker, Anette},
  publisher = {Fraunhofer-IRB-Verl.},
  address   = {Stuttgart},
  isbn      = {3-8167-6621-8},
  pages     = {92 -- 97},
  year      = {2004},
  language  = {de}
}
@book{Naujokat2008,
  author    = {Naujokat, Anke},
  title     = {Ad instar iherosolimitani sepulchri : Gestalt und Bedeutung des Florentiner Heiliggrabtempietto von L. B. Alberti / vorgelegt von Anke Naujokat},
  year      = {2008},
  language  = {de}
}
@article{BerretzSkorupaSanderetal.2011,
  author    = {Berretz, Frank and Skorupa, Sasche and Sander, Volker and Belloum, Adam and Bubak, Marian},
  title     = {Actor-Driven Workflow Execution in Distributed Environments},
  series = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  journal   = {Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-21877-4},
  pages     = {287 -- 294},
  year      = {2011},
  language  = {en}
}
@article{PohlSiegertMeschetal.1998,
  author    = {Pohl, Martina and Siegert, Petra and Mesch, K. and Bruhn, H. and Gr{\"o}tzinger, Joachim},
  title     = {Active site mutants of pyruvate decarboxylase from Zymomonas mobilis : a site-directed mutagenesis study of L112, I472, I476, E473 and N482},
  series = {European journal of biochemistry},
  volume    = {Vol. 257},
  journal   = {European journal of biochemistry},
  number    = {Iss. 3},
  issn      = {1432-1033 (E-Journal); 1742-4658 (E-Journal); 0014-2956 (Print); 1742-464X (Print)},
  pages     = {538 -- 546},
  year      = {1998},
  language  = {en}
}
@article{FerreinSteinbauerVassos2012,
  author    = {Ferrein, Alexander and Steinbauer, Gerald and Vassos, Stavros},
  title     = {Action-Based Imperative Programming with YAGI},
  pages     = {24 -- 31},
  year      = {2012},
  abstract  = {Many tasks for autonomous agents or robots are best described by a specification of the environment and a specification of the available actions the agent or robot can perform. Combining such a specification with the possibility to imperatively program a robot or agent is what we call the actionbased imperative programming. One of the most successful such approaches is Golog. In this paper, we draft a proposal for a new robot programming language YAGI, which is based on the action-based imperative programming paradigm. Our goal is to design a small, portable stand-alone YAGI interpreter. We combine the benefits of a principled domain specification with a clean, small and simple programming language, which does not exploit any side-effects from the implementation language. We discuss general requirements of action-based programming languages and outline YAGI, our action-based language approach which particularly aims at embeddability.},
  language  = {en}
}
@article{FerreinDyllaLakemeyer2002,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard},
  title     = {Acting and Deliberating using Golog in Robotic Soccer - A Hybrid Architecture / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)},
  journal   = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)},
  pages     = {1 -- 7},
  year      = {2002},
  language  = {en}
}
@article{SelmerHetzelBrocketal.2003,
  author    = {Selmer, Thorsten and Hetzel, Marc and Brock, Matthias and Pierik, Antonio J.},
  title     = {Acryloyl-CoA reductase from Clostridium propionicum. An enzyme complex of propionyl-CoA dehydrogenase and electron-transferring flavoprotein / Hetzel, Marc ; Brock, Matthias ; Selmer, Thorsten, Pierik, Antonio J. ; Golding, Bernard T. ; Buckel, Wolfgang},
  series = {European Journal of Biochemistry. 270 (2003), H. 5},
  journal   = {European Journal of Biochemistry. 270 (2003), H. 5},
  isbn      = {0014-2956},
  pages     = {902 -- 910},
  year      = {2003},
  language  = {en}
}
@article{FrauenrathNiendorfKob2008,
  author    = {Frauenrath, Tobias and Niendorf, Thoralf and Kob, Malte},
  title     = {Acoustic method for synchronization of Magnetic Resonance Imaging (MRI)},
  series = {Acta Acustica},
  volume    = {94},
  journal   = {Acta Acustica},
  number    = {1},
  publisher = {Hirzel},
  address   = {Stuttgart},
  issn      = {1861-9959},
  doi       = {10.3813/AAA.918017},
  pages     = {148 -- 155},
  year      = {2008},
  abstract  = {Magnetic Resonance Imaging (MRI) of moving organs requires synchronization with physiological motion or flow, which dictate the viable window for data acquisition. To meet this challenge, this study proposes an acoustic gating device (ACG) that employs acquisition and processing of acoustic signals for synchronization while providing MRI compatibility, immunity to interferences with electro-magnetic and acoustic fields and suitability for MRI at high magnetic field strengths. The applicability and robustness of the acoustic gating approach is examined in a pilot study, where it substitutes conventional ECG-gating for cardiovascular MR. The merits and limitations of the ACG approach are discussed. Implications for MR imaging in the presence of physiological motion are considered including synchronization with other structure- or motion borne sounds.},
  language  = {en}
}
@article{FrauenrathHezelRenzetal.2010,
  author    = {Frauenrath, Tobias and Hezel, Fabian and Renz, Wolfgang and de Geyer d'Orth, Thibaut and Dieringer, Matthias and von Knobelsdorf-Brenkenhoff, Florian and Prothmann, Marcel and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Acoustic cardiac triggering: a practical solution for synchronization and gating of cardiovascular magnetic resonance at 7 Tesla},
  series = {Journal of Cardiovascular Magnetic Resonance},
  volume    = {12},
  journal   = {Journal of Cardiovascular Magnetic Resonance},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1532-429X},
  doi       = {10.1186/1532-429X-12-67},
  year      = {2010},
  abstract  = {Background To demonstrate the applicability of acoustic cardiac triggering (ACT) for imaging of the heart at ultrahigh magnetic fields (7.0 T) by comparing phonocardiogram, conventional vector electrocardiogram (ECG) and traditional pulse oximetry (POX) triggered 2D CINE acquisitions together with (i) a qualitative image quality analysis, (ii) an assessment of the left ventricular function parameter and (iii) an examination of trigger reliability and trigger detection variance derived from the signal waveforms. Results ECG was susceptible to severe distortions at 7.0 T. POX and ACT provided waveforms free of interferences from electromagnetic fields or from magneto-hydrodynamic effects. Frequent R-wave mis-registration occurred in ECG-triggered acquisitions with a failure rate of up to 30\% resulting in cardiac motion induced artifacts. ACT and POX triggering produced images free of cardiac motion artefacts. ECG showed a severe jitter in the R-wave detection. POX also showed a trigger jitter of approximately Δt = 72 ms which is equivalent to two cardiac phases. ACT showed a jitter of approximately Δt = 5 ms only. ECG waveforms revealed a standard deviation for the cardiac trigger offset larger than that observed for ACT or POX waveforms. Image quality assessment showed that ACT substantially improved image quality as compared to ECG (image quality score at end-diastole: ECG = 1.7 ± 0.5, ACT = 2.4 ± 0.5, p = 0.04) while the comparison between ECG vs. POX gated acquisitions showed no significant differences in image quality (image quality score: ECG = 1.7 ± 0.5, POX = 2.0 ± 0.5, p = 0.34). Conclusions The applicability of acoustic triggering for cardiac CINE imaging at 7.0 T was demonstrated. ACT's trigger reliability and fidelity are superior to that of ECG and POX. ACT promises to be beneficial for cardiovascular magnetic resonance at ultra-high field strengths including 7.0 T.},
  language  = {en}
}
@misc{WiesenTippkoetterDuweetal.2012,
  author    = {Wiesen, S. and Tippk{\"o}tter, Nils and Duwe, A. and Ulber, Roland},
  title     = {Aceton-Butanol-Ethanol (ABE)-Fermentation von Organosolv-Holzhydrolysaten},
  series = {Chemie Ingenieur Technik},
  volume    = {84},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201250262},
  pages     = {1308},
  year      = {2012},
  abstract  = {Die L{\"o}sungsmittelherstellung durch Clostridien konnte wirtschaftlich nicht mit der chemischen Synthese von L{\"o}sungsmitteln auf Erd{\"o}lbasis konkurrieren und wurde in den fr{\"u}hen 1960er Jahren nahezu vollst{\"a}ndig eingestellt. Das Interesse an nachwachsenden Rohstoffen hat in den letzten Jahren zu einem Wiederaufleben der ABE-Fermentation gef{\"u}hrt. Aufgrund seiner h{\"o}heren Energiedichte im Vergleich zu Ethanol ist Biobutanol als Energietr{\"a}gerbesonders interessant und bietet sich z. B. als Produkt einer Bioraffinerie der 2. Generation an. F{\"u}r die beschriebenen Experimente wird durch das Organosolv-Verfahren aufgeschlossenes Buchenholz verwendet. Der Faserstoff wird mithilfe von CTec2-Enzymen hydrolysiert, wobei der erhaltene {\"U}berstand eine Glucosekonzentration von 66 g L⁻¹ aufweist. Auf der Basis dieses Materials k{\"o}nnen mit Clostridium acetobutylicum Butanol-Ausbeuten erzielt werden, die mit denen unter Verwendung von reinen Zuckern vergleichbar sind. Dem Problem der hohen Produktinhibierung wird mit einer In-situ-Produktaufarbeitung begegnet. Mithilfe von L{\"o}sungsmittelimpr{\"a}gnierten Partikeln (SIPs) kann die Produktausbeute drastisch gesteigert werden, indem die gebildeten L{\"o}sungsmittel durch das auf dem Partikel impr{\"a}gnierte L{\"o}sungsmittel w{\"a}hrend der Fermentation extrahiert werden. Zudem wird hierdurch die weitere Produktaufarbeitungstark vereinfacht.},
  language  = {de}
}
@article{MertensKlevenhusenJakob1987,
  author    = {Mertens, Josef and Klevenhusen, K. D. and Jakob, H.},
  title     = {Accurate Transonic Wave Drag Prediction Using Simple Physical Models},
  series = {AIAA-Journal. 25 (1987), H. 6},
  journal   = {AIAA-Journal. 25 (1987), H. 6},
  isbn      = {0001-1452},
  pages     = {799 -- 805},
  year      = {1987},
  language  = {en}
}
@inproceedings{SchirraBauschatWatmuff2014,
  author    = {Schirra, Julian and Bauschat, J.-Michael and Watmuff, J.H.},
  title     = {Accurate induced drag prediction for highly non-planar lifting systems},
  series = {19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia},
  booktitle = {19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia},
  pages     = {4 Seiten},
  year      = {2014},
  abstract  = {The impact of wake model effects is investigated for two highly non-planar lifting systems. Dependent on the geometrical arrangement of the configuration, the wake model shape is found to considerably affect the estimation. Particularly at higher angles of attack, an accurate estimation based on the common linear wake model approaches is involved.},
  language  = {en}
}
@article{MuellerBillmaierMueller2013,
  author    = {M{\"u}ller, Karsten and Billmaier, Karl and M{\"u}ller, Ernst A.},
  title     = {Abwasserw{\"a}rmenutzung},
  series = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  journal   = {Wasserwirtschaft, Wassertechnik : wwt. 2013, H. 5},
  publisher = {Deutscher Fachverlag},
  address   = {Frankfurt am Main},
  issn      = {1438-5716},
  pages     = {24 -- 26},
  year      = {2013},
  language  = {de}
}
@book{Kettern1992,
  author    = {Kettern, J{\"u}rgen},
  title     = {Abwassertechnik in Forschung und Praxis : Vortr{\"a}ge anl{\"a}sslich der Jubil{\"a}umsveranstaltung "20 Jahre Oswald-Schulze-Stiftung" / Red. Bearb.: J. T. Kettern},
  publisher = {Oswald-Schulze-Stiftung},
  address   = {Gladbach},
  pages     = {219 S : Ill., graph. Darst},
  year      = {1992},
  language  = {de}
}
@inproceedings{BuschkuehleSchuermannWollert2009,
  author    = {Buschk{\"u}hle, Peter and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg},
  title     = {Abstraction of wireless communication by a convergence middleware in conjunction with a XML-configuration},
  series = {Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium},
  booktitle = {Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium},
  publisher = {Techn. Univ.},
  address   = {Ilmenau},
  isbn      = {978-3-938843-44-4},
  pages     = {95 -- 96},
  year      = {2009},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2015,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Abstracting Away Low-Level Details in Service Robotics with Fuzzy Fluents},
  series = {Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation. Workshop at European Robotics Forum 2015 Vienna, Austria, March 11-13, 2015.},
  journal   = {Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation. Workshop at European Robotics Forum 2015 Vienna, Austria, March 11-13, 2015.},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@inproceedings{BitzAlaydrusStreckertetal.2002,
  author    = {Bitz, Andreas and Alaydrus, M. and Streckert, J. and Hansen, V.W.},
  title     = {Absorption rates inside human body due to radiated electro-magnetic fields of multi-band base station antennas. Boundary value problems with electrically large and high-resolution bodies},
  series = {24th BEMS Annual Meeting, Quebec City, Quebec, Canada, 23 - 27 June 2002},
  booktitle = {24th BEMS Annual Meeting, Quebec City, Quebec, Canada, 23 - 27 June 2002},
  publisher = {Bioelectromagnetics Society},
  address   = {Frederick, MD},
  pages     = {40 -- 41},
  year      = {2002},
  language  = {en}
}
@article{MangHodeniusSchmitzRodeetal.2009,
  author    = {Mang, Thomas and Hodenius, M. A. J. and Schmitz-Rode, T. and Baumann, M.},
  title     = {Absorption of 10-hydroxycamptothecin into the coat of magnetoliposomes / Hodenius, M. A. J. ; Schmitz-Rode, T. ; Baumann, M. ; Ivoanova, G. ; Wong, J. E. ; Mang, T. ; Haulena, F. ; Soenen, S. J. H. ; De Cuyper, M.},
  series = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3},
  journal   = {Colloids and Surfaces A: Physicochemical and Engineering Aspects. 343 (2009), H. 1-3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0927-7757},
  pages     = {20 -- 23},
  year      = {2009},
  language  = {en}
}
@article{HoylerPetkovAndrejtscheff1988,
  author    = {Hoyler, Friedrich and Petkov, P. and Andrejtscheff, W.},
  title     = {Absolute E0, E1 and E2 transition rates in even-even nuclei obtained in thermal neutron capture / P. Petkov ; W. Andrejtscheff ... F. Hoyler ...},
  series = {Journal of Physics G. 14 (1988), H. S},
  journal   = {Journal of Physics G. 14 (1988), H. S},
  isbn      = {0305-4616},
  pages     = {S97 -- S102},
  year      = {1988},
  language  = {en}
}
@article{BreitbachDavidLohnert1984,
  author    = {Breitbach, Gerd and David, P.-H. and Lohnert, G.-H.},
  title     = {Absch{\"a}tzung des langfristigen Lufteintrags nach einem Druckentlastungsst{\"o}rfall des HTR-Modul},
  series = {Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft},
  journal   = {Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft},
  publisher = {Deutsches Atomforum},
  address   = {Bonn},
  isbn      = {0173-0924},
  pages     = {287 -- 290},
  year      = {1984},
  language  = {de}
}
@article{PaschmannSpanka1994,
  author    = {Paschmann, Hans and Spanka, Gerhard},
  title     = {Absch{\"a}tzung des Eindringverhaltens organischer Fl{\"u}ssigkeiten in Beton anhand von Stoffkennwerten},
  series = {Beton. 44 (1994), H. 12},
  journal   = {Beton. 44 (1994), H. 12},
  isbn      = {0005-9846},
  pages     = {738 -- 743},
  year      = {1994},
  language  = {de}
}
@article{Siepmann1986,
  author    = {Siepmann, Thomas},
  title     = {Abschlußbericht zum Vorhaben Nr. 22/IV},
  series = {Forschungsvereinigung Antriebstechnik: Forschungsreport},
  journal   = {Forschungsvereinigung Antriebstechnik: Forschungsreport},
  publisher = {FVA},
  address   = {Frankfurt/M.},
  year      = {1986},
  language  = {de}
}
@book{Gerhardt1983,
  author    = {Gerhardt, Hans Joachim},
  title     = {Abschlußbericht zum Forschungsvorhaben 'Untersuchungen zur Windbelastung von kleinformatigen harten Dachwerkstoffen' / Forscher: C. Kramer ; H. J. Gerhardt. Bearb.: H.-W. Kuster},
  publisher = {IRB-Verl.},
  address   = {Stuttgart},
  pages     = {55, [70] S. : Ill., graph. Darst.},
  year      = {1983},
  language  = {de}
}
@book{HeinrichsWeckGillessen1977,
  author    = {Heinrichs, Horst and Weck, H. and Gillessen, R.},
  title     = {Abschlussbericht zum Zeichnungssystem Freedraft zur rechnerunterstuetzten Zeichnungserstellung},
  address   = {Aachen},
  year      = {1977},
  language  = {de}
}
@techreport{HaegerBongaertsSiegert2023,
  author    = {Haeger, Gerrit and Bongaerts, Johannes and Siegert, Petra},
  title     = {Abschlussbericht Teil II: Eingehende Darstellung Neue biobasierte Lipopeptide aus nachhaltiger Produktion (LipoPep)},
  pages     = {17Seiten},
  year      = {2023},
  language  = {de}
}
@techreport{HoffschmidtVaessenHolzheidetal.2009,
  author    = {Hoffschmidt, Bernhard and Vaeßen, Christiane and Holzheid, Fabian and Gonsior, Daniel},
  title     = {Abschlussbericht Mix-SCR : Effizientes SCR-System unter Verwendung eines innovativen statischen Mischers : Kurztitel: Mix-SCR. F{\"o}rderkennzeichen: 1782X05},
  pages     = {62 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2009},
  language  = {de}
}
@article{SchneiderSchneider2006,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Abschlussarbeiten FAQ / FGA},
  series = {Wirtschaftswissenschaftliches Studium : Wist ; Zeitschrift f{\"u}r Ausbildung und Hochschulkontakt. 35 (2006), H. 9},
  journal   = {Wirtschaftswissenschaftliches Studium : Wist ; Zeitschrift f{\"u}r Ausbildung und Hochschulkontakt. 35 (2006), H. 9},
  isbn      = {0340-1650},
  pages     = {537 -- 539},
  year      = {2006},
  language  = {de}
}
@book{SchneiderSchneider2017,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Abschluss und Abschlussanalyse: systematische Darstellung in {\"U}bersichten},
  edition   = {6. Auflage, Studienausgabe},
  publisher = {Cuvillier},
  address   = {G{\"o}ttingen},
  isbn      = {978-3-7369-9642-7},
  pages     = {Getr. Z{\"a}hlung},
  year      = {2017},
  language  = {de}
}
@article{Olbertz2015,
  author    = {Olbertz, Klaus},
  title     = {Abschlagsfreie Rente mit 63 - Die wichtigsten Fragestellungen und L{\"o}sungen f{\"u}r die Praxis},
  series = {NWB - Steuer- und Wirtschaftsrecht},
  journal   = {NWB - Steuer- und Wirtschaftsrecht},
  number    = {15},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {1860-9449},
  pages     = {1263 -- 1270},
  year      = {2015},
  language  = {de}
}
@article{HagemannGeittnerSchnittkeretal.1989,
  author    = {Hagemann, Hans-J{\"u}rgen and Geittner, P. and Schnittker, W. and Warnier, J.},
  title     = {Abscheidegeschwindigkeiten und Prozeßausbeuten im PCVD-Verfahren. Geittner, P.; Hagemann, H. J.; Schnittker, W.; Warnier, J.; Weling, F.; Wilson, H.},
  series = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)},
  journal   = {Philips - Unsere Forschung in Deutschland / Hrsg.: Philips Forschungslaboratorium GmbH Aachen und Hamburg. 4 (1989)},
  pages     = {140 -- 143},
  year      = {1989},
  language  = {de}
}
@book{Gerhardt1994,
  author    = {Gerhardt, Hans Joachim},
  title     = {Absaugung von großfl{\"a}chig austretenden Schadstoffen beim offenen Guttransport},
  address   = {Frankfurt/M},
  year      = {1994},
  language  = {de}
}
@article{FuchsRitz2011,
  author    = {Fuchs, Britta and Ritz, Thomas},
  title     = {Absatzkan{\"a}le kaum verkn{\"u}pft},
  series = {IT-Mittelstand : IT-Business im Mittelstand},
  volume    = {2011},
  journal   = {IT-Mittelstand : IT-Business im Mittelstand},
  number    = {9},
  publisher = {Medienhaus-Verlag},
  address   = {Bergisch-Gladbach},
  pages     = {16},
  year      = {2011},
  language  = {de}
}
@article{BoehnischBraunMuscarelloetal.2024,
  author    = {B{\"o}hnisch, Nils and Braun, Carsten and Muscarello, Vincenzo and Marzocca, Pier},
  title     = {About the wing and whirl flutter of a slender wing-propeller system},
  series = {Journal of Aircraft},
  journal   = {Journal of Aircraft},
  publisher = {AIAA},
  address   = {Reston, Va.},
  issn      = {1533-3868},
  doi       = {10.2514/1.C037542},
  pages     = {1 -- 14},
  year      = {2024},
  abstract  = {Next-generation aircraft designs often incorporate multiple large propellers attached along the wingspan (distributed electric propulsion), leading to highly flexible dynamic systems that can exhibit aeroelastic instabilities. This paper introduces a validated methodology to investigate the aeroelastic instabilities of wing-propeller systems and to understand the dynamic mechanism leading to wing and whirl flutter and transition from one to the other. Factors such as nacelle positions along the wing span and chord and its propulsion system mounting stiffness are considered. Additionally, preliminary design guidelines are proposed for flutter-free wing-propeller systems applicable to novel aircraft designs. The study demonstrates how the critical speed of the wing-propeller systems is influenced by the mounting stiffness and propeller position. Weak mounting stiffnesses result in whirl flutter, while hard mounting stiffnesses lead to wing flutter. For the latter, the position of the propeller along the wing span may change the wing mode shapes and thus the flutter mechanism. Propeller positions closer to the wing tip enhance stability, but pusher configurations are more critical due to the mass distribution behind the elastic axis.},
  language  = {en}
}
@inproceedings{GerhardsSanderBelloum2012,
  author    = {Gerhards, Michael and Sander, Volker and Belloum, Adam},
  title     = {About the flexible Migration of Workflow Tasks to Clouds : Combining on- and off-premise Executions of Applications},
  series = {CLOUD COMPUTING 2012 : The Third International Conference on Cloud Computing, GRIDs, and Virtualization ; July 22-27, 2012 - Nice, France},
  booktitle = {CLOUD COMPUTING 2012 : The Third International Conference on Cloud Computing, GRIDs, and Virtualization ; July 22-27, 2012 - Nice, France},
  editor    = {Zimmermann, Wolf and Lee, Yong Woo and Demchenko, Yuri},
  publisher = {IARIA Journals},
  isbn      = {978-1-61208-216-5},
  pages     = {82 -- 87},
  year      = {2012},
  abstract  = {An increasing number of applications target their executions on specific hardware like general purpose Graphics Processing Units. Some Cloud Computing providers offer this specific hardware so that organizations can rent such resources. However, outsourcing the whole application to the Cloud causes avoidable costs if only some parts of the application benefit from the specific expensive hardware. A partial execution of applications in the Cloud is a tradeoff between costs and efficiency. This paper addresses the demand for a consistent framework that allows for a mixture of on- and off-premise calculations by migrating only specific parts to a Cloud. It uses the concept of workflows to present how individual workflow tasks can be migrated to the Cloud whereas the remaining tasks are executed on-premise.},
  language  = {en}
}
@article{SchoeningKloock2007,
  author    = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P.},
  title     = {About 20 years of silicon-based thin-film sensors with chalcogenide glass materials for heavy metal analysis: Technological aspects of fabrication and miniaturization},
  series = {Electroanalysis. 19 (2007), H. 19-20},
  journal   = {Electroanalysis. 19 (2007), H. 19-20},
  isbn      = {1040-0397},
  pages     = {2029 -- 2038},
  year      = {2007},
  language  = {en}
}
@article{PawelkeButzer1967,
  author    = {Pawelke, Siegfried and Butzer, Paul L.},
  title     = {Ableitungen von trigonometrischen Approximationsprozessen},
  series = {Acta scientiarum mathematicarum / Institutum Bolyaianum Universitatis Szegediensis},
  volume    = {28},
  journal   = {Acta scientiarum mathematicarum / Institutum Bolyaianum Universitatis Szegediensis},
  number    = {1-2},
  publisher = {n.a.},
  address   = {Szeged},
  isbn      = {0001-6969},
  pages     = {173 -- 183},
  year      = {1967},
  language  = {de}
}
@misc{Olbertz2016,
  author    = {Olbertz, Klaus},
  title     = {Abfindungsprogramm nach „Windhundprinzip" ist zul{\"a}ssig},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {303 -- 303},
  year      = {2016},
  language  = {de}
}
@article{Biener2000,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 29., neubearb. Aufl.},
  journal   = {Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 29., neubearb. Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-35002-5},
  pages     = {1273 -- 1303},
  year      = {2000},
  language  = {de}
}
@incollection{Biener2005,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis / Otto W. Wetzell (Hrsg.). Bearb. von: Herwig Baumgartner ...},
  booktitle = {Wendehorst Beispiele aus der Baupraxis / Otto W. Wetzell (Hrsg.). Bearb. von: Herwig Baumgartner ...},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {3-519-00489-5},
  pages     = {255 -- 269},
  year      = {2005},
  language  = {de}
}
@article{Biener2004,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln, m. CD-ROM / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berarb. und aktualisierte Aufl.},
  journal   = {Bautechnische Zahlentafeln, m. CD-ROM / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berarb. und aktualisierte Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-55002-4},
  pages     = {1259 -- 1292},
  year      = {2004},
  language  = {de}
}
@article{Biener2002,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln / Wendehorst. Hrsg.: Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... - 30., akt. u. erw. Aufl.},
  journal   = {Bautechnische Zahlentafeln / Wendehorst. Hrsg.: Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... - 30., akt. u. erw. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {3-519-45002-X},
  pages     = {1155 -- 1187},
  year      = {2002},
  language  = {de}
}
@incollection{Biener1998,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 28., neubearb. Aufl.},
  booktitle = {Bautechnische Zahlentafeln : mit 225 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 28., neubearb. Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-25002-0},
  pages     = {1265 -- 1292},
  year      = {1998},
  language  = {de}
}
@article{Biener1996,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln : mit 245 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 27., neubearb. und erw. Aufl.},
  journal   = {Bautechnische Zahlentafeln : mit 245 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 27., neubearb. und erw. Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-15002-6},
  pages     = {1271 -- 1298},
  year      = {1996},
  language  = {de}
}
@article{Biener1994,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln : mit 194 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 26., neubearb. und erw. Aufl.},
  journal   = {Bautechnische Zahlentafeln : mit 194 Beispielen / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von Hubert Achten ... - 26., neubearb. und erw. Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart},
  isbn      = {3-519-05002-1},
  pages     = {1089 -- 1102},
  year      = {1994},
  language  = {de}
}
@article{Biener2007,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.},
  journal   = {Bautechnische Zahlentafeln / Wendehorst, Reinhard ; Wetzell, Otto W. [Hrsg.] 32., vollst. aktualisierte Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {978-3-8351-0055-8},
  pages     = {1291 -- 1330},
  year      = {2007},
  language  = {de}
}
@incollection{Biener2012,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_20},
  pages     = {1499 -- 1540},
  year      = {2012},
  language  = {de}
}
@article{Biener2007,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].},
  journal   = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8351-0069-5},
  pages     = {433 -- 463},
  year      = {2007},
  language  = {de}
}
@incollection{Biener2015,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01688-3},
  pages     = {1231 -- 1260},
  year      = {2015},
  language  = {de}
}
@incollection{Biener2012,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0999-5 ; 978-3-8348-8229-5},
  doi       = {10.1007/978-3-8348-8229-5_17},
  pages     = {567 -- 603},
  year      = {2012},
  language  = {de}
}
@incollection{Biener2009,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0684-0 ; 978-3-8348-9997-2},
  doi       = {10.1007/978-3-8348-9997-2_16},
  pages     = {463 -- 499},
  year      = {2009},
  language  = {de}
}
@incollection{Biener2015,
  author    = {Biener, Ernst},
  title     = {Abfallwirtschaft},
  series = {Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_17},
  pages     = {680 -- 723},
  year      = {2015},
  language  = {de}
}
@article{KetternFrechen1995,
  author    = {Kettern, J{\"u}rgen and Frechen, F. B.},
  title     = {Abfallentsorgung und Geruchsemissionen. Tl.2. Minderungsmaßnahmen / Frechen, F. B.; Kettern, J. T.},
  series = {Entsorgungspraxis. 13 (1995), H. 1/2},
  journal   = {Entsorgungspraxis. 13 (1995), H. 1/2},
  isbn      = {0724-6870},
  pages     = {40 -- 43},
  year      = {1995},
  language  = {de}
}
@article{KetternFrechen1995,
  author    = {Kettern, J{\"u}rgen and Frechen, F. B.},
  title     = {Abfallentsorgung und Geruchsemissionen. Tl.1. Grundlagen und Problematik / Frechen, F. B.; Kettern, J. T.},
  series = {Entsorgungspraxis. 13 (1995), H. 1/2},
  journal   = {Entsorgungspraxis. 13 (1995), H. 1/2},
  isbn      = {0724-6870},
  pages     = {58 -- 62},
  year      = {1995},
  language  = {de}
}
@article{MangHaulena1999,
  author    = {Mang, Thomas and Haulena, Friedhelm},
  title     = {Abdichtmaterialien gegen dr{\"u}ckendes Wasser und Diesel mit verbesserter Umweltvertr{\"a}glichkeit},
  series = {Internationale Zeitschrift f{\"u}r Bauinstandsetzen und Baudenkmalpflege = International journal for restoration of buildings and monuments. 5 (1999), H. 1},
  journal   = {Internationale Zeitschrift f{\"u}r Bauinstandsetzen und Baudenkmalpflege = International journal for restoration of buildings and monuments. 5 (1999), H. 1},
  isbn      = {0947-4498},
  pages     = {57},
  year      = {1999},
  language  = {de}
}
@article{Mang2002,
  author    = {Mang, Thomas},
  title     = {Abdichtmaterialien gegen dr{\"u}ckendes Wasser},
  series = {Bauchemie von der Forschung bis zur Praxis : 3. Tagung Bauchemie in W{\"u}rzburg ; 27./28. September 2001 in W{\"u}rzburg / GDCh-Fachgruppe Bauchemie ; [Red.: W. Hiller ...]},
  journal   = {Bauchemie von der Forschung bis zur Praxis : 3. Tagung Bauchemie in W{\"u}rzburg ; 27./28. September 2001 in W{\"u}rzburg / GDCh-Fachgruppe Bauchemie ; [Red.: W. Hiller ...]},
  publisher = {GDCh},
  address   = {Frankfurt am Main},
  isbn      = {3-936028-04-4},
  pages     = {65},
  year      = {2002},
  language  = {de}
}
@article{Alt1974,
  author    = {Alt, Helmut},
  title     = {Ab 1975 Uranerz aus Rabbit-Lake},
  series = {Energiewirtschaftliche Tagesfragen},
  volume    = {24},
  journal   = {Energiewirtschaftliche Tagesfragen},
  number    = {1/2},
  publisher = {VDE-Verlag},
  address   = {Berlin},
  issn      = {0720-6240},
  pages     = {34},
  year      = {1974},
  language  = {de}
}
@inproceedings{EvansBraunUlmeretal.2022,
  author    = {Evans, Benjamin and Braun, Sebastian and Ulmer, Jessica and Wollert, J{\"o}rg},
  title     = {AAS implementations - current problems and solutions},
  series = {20th International Conference on Mechatronics - Mechatronika (ME)},
  booktitle = {20th International Conference on Mechatronics - Mechatronika (ME)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-6654-1040-3},
  doi       = {10.1109/ME54704.2022.9982933},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {The fourth industrial revolution presents a multitude of challenges for industries, one of which being the increased flexibility required of manufacturing lines as a result of increased consumer demand for individualised products. One solution to tackle this challenge is the digital twin, more specifically the standardised model of a digital twin also known as the asset administration shell. The standardisation of an industry wide communications tool is a critical step in enabling inter-company operations. This paper discusses the current state of asset administration shells, the frameworks used to host them and their problems that need to be addressed. To tackle these issues, we propose an event-based server capable of drastically reducing response times between assets and asset administration shells and a multi-agent system used for the orchestration and deployment of the shells in the field.},
  language  = {en}
}
@article{Naujokat2001,
  author    = {Naujokat, Anke},
  title     = {Aachen: Symposium - Maulnes und der Manierismus in Frankreich},
  series = {Bauwelt. 92 (2001), H. 22},
  journal   = {Bauwelt. 92 (2001), H. 22},
  isbn      = {0931-6590},
  pages     = {4},
  year      = {2001},
  language  = {de}
}
@article{Naujokat2005,
  author    = {Naujokat, Anke},
  title     = {Aachen: Grau Blau Gr{\"u}n : der Emscher Landschaftspark},
  series = {Bauwelt. 96 (2005), H. 29},
  journal   = {Bauwelt. 96 (2005), H. 29},
  isbn      = {0931-6590},
  pages     = {3},
  year      = {2005},
  language  = {de}
}