@inproceedings{OegunKlingHeuermannetal.2014,
  author    = {{\"O}gun, Celal Mohan and Kling, Rainer and Heuermann, Holger and Gr{\"a}ser, Ulrich and Schopp, Christoph},
  title     = {Elektrodenlose quecksilberfreie Niederdrucklampen betrieben mit Mikrowellen},
  series = {Licht 2014 [Elektronische Ressource] : Den Haag, Holland ; 21. Gemeinschaftstagung, 21. bis 24. September 2014 ; Tagungsband},
  booktitle = {Licht 2014 [Elektronische Ressource] : Den Haag, Holland ; 21. Gemeinschaftstagung, 21. bis 24. September 2014 ; Tagungsband},
  publisher = {Nederlandse Stichting voor Verlichtingskunde},
  address   = {Ede},
  pages     = {[Elektronische Ressource]},
  year      = {2014},
  language  = {de}
}
@inproceedings{ZaehlTheisWolfetal.2023,
  author    = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin and K{\"o}hler, Klemens},
  title     = {Teamwork in software development and what personality has to do with it - an overview},
  series = {Virtual, Augmented and Mixed Reality},
  booktitle = {Virtual, Augmented and Mixed Reality},
  editor    = {Chen, Jessie Y. C. and Fragomeni, Gino},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35633-9 (Print)},
  doi       = {10.1007/978-3-031-35634-6_10},
  pages     = {130 -- 153},
  year      = {2023},
  abstract  = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.},
  language  = {en}
}
@inproceedings{ZaehlBiewendtWolfetal.2022,
  author    = {Z{\"a}hl, Philipp M. and Biewendt, Marcel and Wolf, Martin and Eggert, Mathias},
  title     = {Requirements for Competence Developing Games in the Environment of SE Competence Development},
  series = {Angewandte Forschung in der Wirtschaftsinformatik 2022},
  booktitle = {Angewandte Forschung in der Wirtschaftsinformatik 2022},
  publisher = {GITO},
  address   = {Berlin},
  isbn      = {978-3-95545-409-8},
  doi       = {10.30844/AKWI_2022_05},
  pages     = {73 -- 88},
  year      = {2022},
  abstract  = {Many of today's factors make software development more and more complex, such as time pressure, new technologies, IT security risks, et cetera. Thus, a good preparation of current as well as future software developers in terms of a good software engineering education becomes progressively important. As current research shows, Competence Developing Games (CDGs) and Serious Games can offer a potential solution. This paper identifies the necessary requirements for CDGs to be conducive in principle, but especially in software engineering (SE) education. For this purpose, the current state of research was summarized in the context of a literature review. Afterwards, some of the identified requirements as well as some additional requirements were evaluated by a survey in terms of subjective relevance.},
  language  = {en}
}
@inproceedings{ZugNiemuellerHochgeschwenderetal.2017,
  author    = {Zug, Sebastian and Niemueller, Tim and Hochgeschwender, Nico and Seidensticker, Kai and Seidel, Martin and Friedrich, Tim and Neumann, Tobias and Karras, Ulrich and Kraetzschmar, Gerhard K. and Ferrein, Alexander},
  title     = {An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_13},
  pages     = {157 -- 168},
  year      = {2017},
  language  = {en}
}
@article{ZastrowRieder1980,
  author    = {Zastrow, Udo and Rieder, G.},
  title     = {Bracketing eigenvalues of an oscillating elastic body by integral equations},
  series = {Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, M{\´a}traf{\"u}red (Hungary), 21 - 23 February, 1979 / ed. by {\`A}. Bosznay},
  journal   = {Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, M{\´a}traf{\"u}red (Hungary), 21 - 23 February, 1979 / ed. by {\`A}. Bosznay},
  publisher = {Akad. Kiad{\´o}},
  address   = {Budapest},
  isbn      = {963-05-2625-5},
  pages     = {421 -- 434},
  year      = {1980},
  language  = {en}
}
@article{ZastrowRieder1976,
  author    = {Zastrow, Udo and Rieder, G.},
  title     = {Eine Variante des Kraftgr{\"o}ßenverfahrens f{\"u}r ebene Rahmentragwerke},
  series = {Wissenschaftliche Zeitschrift / Hochschule f{\"u}r Architektur und Bauwesen},
  volume    = {23},
  journal   = {Wissenschaftliche Zeitschrift / Hochschule f{\"u}r Architektur und Bauwesen},
  number    = {3},
  publisher = {HAB},
  address   = {Weimar},
  isbn      = {0509-9773},
  pages     = {304 -- 306},
  year      = {1976},
  language  = {de}
}
@article{ZastrowRieder1980,
  author    = {Zastrow, Udo and Rieder, G.},
  title     = {Zur Eingrenzung der Eigenfrequenzen eines station{\"a}r schwingenden elastischen K{\"o}rpers mittels Integralgleichungen},
  series = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 60 (1980), H. 6},
  journal   = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 60 (1980), H. 6},
  isbn      = {1521-4001},
  pages     = {T149 -- T150},
  year      = {1980},
  language  = {de}
}
@article{ZastrowPanagiotopoulos1979,
  author    = {Zastrow, Udo and Panagiotopoulos, P. D.},
  title     = {An integral "Equation" approach to the unilateral contact problem},
  series = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 59 (1979), H. 8},
  journal   = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 59 (1979), H. 8},
  isbn      = {1521-4001},
  pages     = {392 -- 393},
  year      = {1979},
  language  = {en}
}
@article{ZastrowHackl1988,
  author    = {Zastrow, Udo and Hackl, Klaus},
  title     = {On the existence, uniqueness and completeness of displacements and stress functions in linear elasticity / Hackl, Klaus ; Zastrow, Udo},
  series = {Journal of Elasticity. 19 (1988), H. 1},
  journal   = {Journal of Elasticity. 19 (1988), H. 1},
  isbn      = {1573-2681},
  pages     = {3 -- 23},
  year      = {1988},
  language  = {en}
}
@article{ZastrowGreuelWeisse1991,
  author    = {Zastrow, Udo and Greuel, M. and Weiße, Felicitas},
  title     = {Das Kawabata-Meßger{\"a}te- und Berechnungssystem: Der Griff eines Gewebes - subjektive Beurteilung und objektive Messung, Teil 1},
  series = {Bekleidung + W{\"a}sche, Bekleidung + Maschenware : Zeitschrift f{\"u}r die gesamte Bekleidungsindustrie. 43 (1991), H. 4},
  journal   = {Bekleidung + W{\"a}sche, Bekleidung + Maschenware : Zeitschrift f{\"u}r die gesamte Bekleidungsindustrie. 43 (1991), H. 4},
  pages     = {22 -- 25},
  year      = {1991},
  language  = {de}
}
@article{ZastrowGreuelWeisse1991,
  author    = {Zastrow, Udo and Greuel, M. and Weiße, Felicitas},
  title     = {Das Kawabata-Meßger{\"a}te- und Berechnungssystem: Der Griff eines Gewebes - subjektive Beurteilung und objektive Messung, Teil 2},
  series = {Bekleidung + W{\"a}sche, Bekleidung + Maschenware : Zeitschrift f{\"u}r die gesamte Bekleidungsindustrie. 43 (1991), H. 5},
  journal   = {Bekleidung + W{\"a}sche, Bekleidung + Maschenware : Zeitschrift f{\"u}r die gesamte Bekleidungsindustrie. 43 (1991), H. 5},
  pages     = {36 -- 45},
  year      = {1991},
  language  = {de}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {On the formulation of the fundamental solutions for orthotropic plane elasticity},
  series = {Acta Mechanica. 57 (1985), H. 3-4},
  journal   = {Acta Mechanica. 57 (1985), H. 3-4},
  isbn      = {1619-6937},
  pages     = {113 -- 122},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {On the complete system of fundamental solutions for anisotropic slices and slabs: A comparison by use of the slab analogy},
  series = {Journal of Elasticity. 15 (1985), H. 3},
  journal   = {Journal of Elasticity. 15 (1985), H. 3},
  isbn      = {1573-2681},
  pages     = {293 -- 318},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Basic geometrical singularities in plane-elasticity and plate-bending problems},
  series = {International Journal of Solids and Structures. 21 (1985), H. 10},
  journal   = {International Journal of Solids and Structures. 21 (1985), H. 10},
  isbn      = {0020-7683},
  pages     = {1047 -- 1067},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Numerical plane stress analysis by integral equations based on the singularity method},
  series = {SM archives . 10 (1985)},
  journal   = {SM archives . 10 (1985)},
  isbn      = {0376-7426},
  pages     = {113 -- 128},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1978,
  author    = {Zastrow, Udo},
  title     = {Zur Berechnung anisotroper Scheiben durch singul{\"a}re Integralgleichungen},
  series = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik.},
  volume    = {58},
  journal   = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik.},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Berlin},
  isbn      = {1521-4001},
  doi       = {10.1002/zamm.19780580605},
  pages     = {T132 -- T133},
  year      = {1978},
  language  = {de}
}
@article{Zastrow1979,
  author    = {Zastrow, Udo},
  title     = {Anisotrope Scheiben mit gemischten Randbedingungen},
  series = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik. 59 (1979), H. 5},
  journal   = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik. 59 (1979), H. 5},
  isbn      = {1521-4001},
  pages     = {T218 -- T219},
  year      = {1979},
  language  = {de}
}
@article{Zastrow1980,
  author    = {Zastrow, Udo},
  title     = {Die Airysche Spannungsfunktion f{\"u}r die unendliche anisotrope, orthotrope und isotrope Scheibe},
  series = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik. 60 (1980), H. 6},
  journal   = {ZAMM - Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik. 60 (1980), H. 6},
  isbn      = {1521-4001},
  pages     = {T159 -- T160},
  year      = {1980},
  language  = {de}
}
@book{Zastrow1979,
  author    = {Zastrow, Udo},
  title     = {Berechnung von anisotropen Scheiben mit gemischten Randbedingungen durch singulaere Integralgleichungen},
  year      = {1979},
  language  = {de}
}
@book{Zastrow1986,
  author    = {Zastrow, Udo},
  title     = {Zur L{\"o}sung von Halbraumproblemen nach der Spannungsfunktionenmethode : neue u. alte Ans{\"a}tze f{\"u}r Verschiebungs- u. Spannungsfunktionen in d. r{\"a}uml. Elastizit{\"a}tstheorie},
  publisher = {VDI-Berl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-143318-7},
  pages     = {XI, 331 S. : graph. Darst.},
  year      = {1986},
  language  = {de}
}
@article{Zastrow1981,
  author    = {Zastrow, Udo},
  title     = {Die Einflußfunktionen der Einzelkraft und der Stufenversetzung in der anisotropen Vollebene},
  series = {Archive of Applied Mechanics - Ingenieur Archiv. 51 (1981), H. 1-2},
  journal   = {Archive of Applied Mechanics - Ingenieur Archiv. 51 (1981), H. 1-2},
  isbn      = {1432-0681},
  pages     = {89 -- 99},
  year      = {1981},
  language  = {de}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Zum System der Einflußfunktionen f{\"u}r die unendliche anisotrope Scheibe mit statischen und geometrischen Singularit{\"a}ten},
  series = {Archive of Applied Mechanics - Ingenieur Archiv. 55 (1985), H. 2},
  journal   = {Archive of Applied Mechanics - Ingenieur Archiv. 55 (1985), H. 2},
  isbn      = {1432-0681},
  pages     = {124 -- 133},
  year      = {1985},
  language  = {de}
}
@article{Zastrow1982,
  author    = {Zastrow, Udo},
  title     = {Solution of plane anisotropic elastostatical boundary value problems by singular integral equations},
  series = {Acta Mechanica. 44 (1982), H. 1-2},
  journal   = {Acta Mechanica. 44 (1982), H. 1-2},
  isbn      = {1619-6937},
  pages     = {59 -- 71},
  year      = {1982},
  language  = {en}
}
@article{YazdanbakhshSolbachBitz2012,
  author    = {Yazdanbakhsh, Pedram and Solbach, Klaus and Bitz, Andreas},
  title     = {Variable power combiner for RF mode shimming in 7-T MR imaging},
  series = {IEEE Transaction on Biomedical Engineering},
  volume    = {59},
  journal   = {IEEE Transaction on Biomedical Engineering},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {1558-2531},
  doi       = {10.1109/TBME.2012.2205926},
  pages     = {2549 -- 2557},
  year      = {2012},
  abstract  = {This contribution discusses the utilization of RF power in an MRI system with RF mode shimming which enables the superposition of circularly polarized modes of a transmit RF coil array driven by a Butler matrix. Since the required power for the individual modes can vary widely, mode-shimming can result in a significant underutilization of the total available RF power. A variable power combiner (VPC) is proposed to improve the power utilization: it can be realized as a reconfiguration of the MRI transmit system by the inclusion of one additional matrix network which receives the power from all transmit amplifiers at its input ports and provides any desired (combined) power distribution at its output ports by controlling the phase and amplitude of the amplifiers' input signals. The power distribution at the output ports of the VPC is then fed into the "mode" ports of the coil array Butler matrix in order to superimpose the spatial modes at the highest achievable power utilization. The VPC configuration is compared to the standard configuration of the transmit chain of our MRI system with 8 transmit channels and 16 coils. In realistic scenarios, improved power utilization was achieved from 17\% to 60\% and from 14\% to 55\% for an elliptical phantom and a region of interest in the abdomen, respectively, and an increase of the power utilization of 1 dB for a region of interest in the upper leg. In general, it is found that the VPC allows significant improvement in power utilization when the shimming solution demands only a few modes to be energized, while the technique can yield loss in power utilization in cases with many modes required at high power level.},
  language  = {en}
}
@inproceedings{XuSchwarteHeinoletal.1998,
  author    = {Xu, Zhanping and Schwarte, Rudolf and Heinol, Horst-Guenther and Buxbaum, Bernd and Ringbeck, Thorsten},
  title     = {Smart pixel : photonic mixer device (PMD) ; new system concept of a 3D-imaging camera-on-a-chip},
  series = {Proceedings : M2VIP '98; Nanjing, China, 10th - 12th September 1998},
  booktitle = {Proceedings : M2VIP '98; Nanjing, China, 10th - 12th September 1998},
  editor    = {Cheung, Edmund H. M.},
  address   = {Hong Kong},
  isbn      = {962-442-129-3},
  pages     = {259 -- 264},
  year      = {1998},
  language  = {en}
}
@book{WosnitzaHilgers2012,
  author    = {Wosnitza, Franz and Hilgers, Hans Gerd},
  title     = {Energieeffizienz und Energiemanagement : Ein {\"U}berblick heutiger M{\"o}glichkeiten und Notwendigkeiten},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-8671-2},
  pages     = {Elektronische Ressource},
  year      = {2012},
  language  = {de}
}
@book{WosnitzaHilgers2012,
  author    = {Wosnitza, Franz and Hilgers, Hans Gerd},
  title     = {Energieeffizienz und Energiemanagement : ein {\"U}berblick heutiger M{\"o}glichkeiten und Notwendigkeiten},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-1941-3},
  pages     = {XVII, 548 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {en}
}
@book{Wosnitza1976,
  author    = {Wosnitza, Franz},
  title     = {Bau eines HF-Empfangsteiles, Bild-Ton-ZF-Verst{\"a}rkers und Demodulators, sowie eines Bildtr{\"a}gertonempfangsteiles f{\"u}r Schmalbandfernsehen f{\"u}r den ATV-Fernsehumsetzer DK 0 HJ / Betreuer: Erich Vogelsang},
  year      = {1976},
  language  = {de}
}
@book{Wosnitza1980,
  author    = {Wosnitza, Franz},
  title     = {Freifeldmessungen an Violinen und geh{\"o}rgem{\"a}ße Bewertungen ihrer Frequenzen},
  year      = {1980},
  language  = {de}
}
@book{Wosnitza1986,
  author    = {Wosnitza, Franz},
  title     = {Ein Testbarkeitsanalysemaß zur Architekturbewertung programmierbarer Schaltnetze / von Franz Wosnitza},
  pages     = {116 S. : Ill., graph. Darst.},
  year      = {1986},
  language  = {de}
}
@article{Wosnitza1987,
  author    = {Wosnitza, Franz},
  title     = {Ein Testbarkeitsanalysemaß f{\"u}r den testfreundlichen Entwurf integrierter Schaltkreise auf Register-Transfer-Niveau},
  series = {ITG-Fachberichte. 98 (1987)},
  journal   = {ITG-Fachberichte. 98 (1987)},
  pages     = {291 -- 295},
  year      = {1987},
  language  = {de}
}
@book{Wosnitza1996,
  author    = {Wosnitza, Franz},
  title     = {Grundlagen elektromagnetischer Felder und Netzwerke I/2 : Analyse station{\"a}rer, linearer Str{\"o}mungsfelder und Netzwerke (Gleichstromkreis)},
  publisher = {Verl. der Augustinus-Buchh.},
  address   = {Aachen},
  isbn      = {3-86073-543-8},
  pages     = {206 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@book{Wosnitza2003,
  author    = {Wosnitza, Franz},
  title     = {Analyse station{\"a}rer, linearer Str{\"o}mungsfelder und Gleichstrom-Netzwerke},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-86073-546-2},
  pages     = {208 S. : zahlr. graph. Darst.},
  year      = {2003},
  language  = {de}
}
@book{Wosnitza1987,
  author    = {Wosnitza, Franz},
  title     = {Werkzeuge des MIMOLA-Hardware-Entwurfssystems. / Kelle, K. ; Kr{\"u}ger, G. ; Marwedel, P. ; Nowak, L. ; Terasa, L. ; Wosnitza, F.},
  publisher = {Inst., Univ.},
  address   = {Kiel},
  pages     = {187 S.},
  year      = {1987},
  language  = {de}
}
@inproceedings{WolfWiese2013,
  author    = {Wolf, Martin and Wiese, Ute},
  title     = {A comparative transformation model for process changes using serious games},
  series = {2013 IEEE 2nd International Conference on Serious Games and Applications for Health (SeGAH): proceedings of a meeting held 2-3 May 2013, Algarve, Portugal},
  booktitle = {2013 IEEE 2nd International Conference on Serious Games and Applications for Health (SeGAH): proceedings of a meeting held 2-3 May 2013, Algarve, Portugal},
  publisher = {Institute of Electrical and Electronics Engineers (IEEE)},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Serious Games and Applications for Health <2, 2013, Algarve>},
  isbn      = {978-1-4673-6164-4},
  doi       = {10.1109/SeGAH.2013.6665307},
  pages     = {64 -- 70},
  year      = {2013},
  language  = {en}
}
@inproceedings{WolfWiedenmaierSchlick1998,
  author    = {Wolf, Martin and Wiedenmaier, S. and Schlick, Christopher},
  title     = {Flexible Kooperation durch computergest{\"u}tzte Teamarbeit},
  series = {Groupware und organisatorische Innovation : Tagungsband der Deutschen Fachtagung zu Computer Supported Cooperative Work. - (Berichte des German Chapter of the ACM ; Bd. 51)},
  booktitle = {Groupware und organisatorische Innovation : Tagungsband der Deutschen Fachtagung zu Computer Supported Cooperative Work. - (Berichte des German Chapter of the ACM ; Bd. 51)},
  editor    = {Herrmann, Thomas},
  publisher = {Teubner},
  address   = {Stuttgart},
  isbn      = {3-519-02692-9},
  pages     = {349 -- 350},
  year      = {1998},
  language  = {de}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@article{WolfSimonSchlick1997,
  author    = {Wolf, Martin and Simon, S. and Schlick, Christopher},
  title     = {Computergest{\"u}tzte Kooperation - Eine Seifenblase? / Wolf, M.; Simon, S.; Schlick, C.},
  series = {Rechnergest{\"u}tzte Kooperation in Verwaltungen und großen Unternehmen : Tagungsband zum Workshop der GI-Gachgruppe / Peter Mambrey ... ( Hrsg.)},
  journal   = {Rechnergest{\"u}tzte Kooperation in Verwaltungen und großen Unternehmen : Tagungsband zum Workshop der GI-Gachgruppe / Peter Mambrey ... ( Hrsg.)},
  publisher = {Univ., Fachbereich Mathematik u. Informatik},
  address   = {Essen},
  pages     = {220 -- 234},
  year      = {1997},
  language  = {de}
}
@article{WolfSchlickSpringer1997,
  author    = {Wolf, Martin and Schlick, Christopher and Springer, J.},
  title     = {The use of implicit communication mechanisms in desktop-teleconferencing-systems},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {193 -- 194},
  year      = {1997},
  language  = {en}
}
@inproceedings{WolfSchlickHerbstetal.1996,
  author    = {Wolf, Martin and Schlick, Christopher and Herbst, D. and Springer, J.},
  title     = {Einflussfaktoren auf den Erfolg von Telekooperation in großen Unternehmen},
  series = {Computer Supported Cooperative Work (CSCW) in großen Unternehmungen : Tagungsband zum Workshop der GI-Fachgruppe 5.5.1 "CSCW in Organisationen" und dem Technologiezentrum Darmstadt der Deutschen Telekom AG vom 09. - 10. Mai 1996},
  booktitle = {Computer Supported Cooperative Work (CSCW) in großen Unternehmungen : Tagungsband zum Workshop der GI-Fachgruppe 5.5.1 "CSCW in Organisationen" und dem Technologiezentrum Darmstadt der Deutschen Telekom AG vom 09. - 10. Mai 1996},
  editor    = {Uellner, Stefan},
  publisher = {Dt. Telekom},
  address   = {Darmstadt},
  pages     = {1 -- 12},
  year      = {1996},
  language  = {de}
}
@article{WolfLuczakSpringeretal.1997,
  author    = {Wolf, Martin and Luczak, Holger and Springer, J. and Simon, S.},
  title     = {The role of metaphors in computer supported cooperative work},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {191 -- 192},
  year      = {1997},
  language  = {en}
}
@article{WolfLuczak1999,
  author    = {Wolf, Martin and Luczak, Holger},
  title     = {Computer Supported Communication and Cooperation - Making Information Aware / Luczak, H. ; Wolf, M.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {298 -- 302},
  year      = {1999},
  language  = {en}
}
@inproceedings{WolfLenz2015,
  author    = {Wolf, Martin and Lenz, Laura L.},
  title     = {The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)},
  series = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  booktitle = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  publisher = {IEEE [u.a.]},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-4823-9},
  doi       = {10.1109/SeGAH.2014.7067089},
  pages     = {135 -- 142},
  year      = {2015},
  language  = {en}
}
@inproceedings{WolfKoenig2017,
  author    = {Wolf, Martin and K{\"o}nig, Johannes Alexander},
  title     = {Competence Developing Games - Ein {\"U}berblick},
  series = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  booktitle = {INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft f{\"u}r Informatik},
  editor    = {Eibl, Maximilian and Gaedke, Martin},
  organization    = {Gesellschaft f{\"u}r Informatik},
  isbn      = {978-3-88579-669-5},
  doi       = {10.18420/in2017_32},
  pages     = {385 -- 391},
  year      = {2017},
  abstract  = {Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu {\"u}berf{\"u}hren. In diesem Artikel wird der {\"U}berbegriff „Competence Developing Games" definiert und anhand von Beispielen erl{\"a}utert. Daf{\"u}r werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erl{\"a}utert und eine Zuordnung durch-gef{\"u}hrt.},
  language  = {de}
}
@incollection{WolfFraentz2013,
  author    = {Wolf, Martin and Fr{\"a}ntz, Birgit},
  title     = {Erfolgreiches IT-Marketing},
  series = {Erfolgreiches IT-Marketing in Zeiten von Social Media, Cloud \& Co. - (CIO-Handbuch ; 2)},
  booktitle = {Erfolgreiches IT-Marketing in Zeiten von Social Media, Cloud \& Co. - (CIO-Handbuch ; 2)},
  edition   = {1. Auflage},
  publisher = {Symposion Publishing},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-86329-612-4},
  pages     = {123 -- 140},
  year      = {2013},
  language  = {de}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Empirical Investigation of a workspace model for Chemical engineers / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger},
  series = {Proceedings of the Human Factors and Ergonomics Society Annual Meeting July 2000. 44 (2000), H. 6},
  journal   = {Proceedings of the Human Factors and Ergonomics Society Annual Meeting July 2000. 44 (2000), H. 6},
  publisher = {-},
  pages     = {612 -- 615},
  year      = {2000},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Empirische Untersuchung eines Groupware-basierten Unterst{\"u}tzungs-Systems f{\"u}r verfahrenstechnische Entwickler / Wolf, M. ; Foltz, C. ; Schlick, C. ; Luczak, H.},
  series = {Zeitschrift f{\"u}r Arbeitswissenschaft. 54 (2000), H. 3-4},
  journal   = {Zeitschrift f{\"u}r Arbeitswissenschaft. 54 (2000), H. 3-4},
  publisher = {-},
  isbn      = {0340-2444},
  pages     = {258 -- 266},
  year      = {2000},
  language  = {de}
}
@article{WolfFoltzSchlicketal.2002,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Development and evaluation of a groupware system to support chemical design processes / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger},
  series = {International Journal of Human-Computer Interaction . 14 (2002), H. 2},
  journal   = {International Journal of Human-Computer Interaction . 14 (2002), H. 2},
  publisher = {-},
  isbn      = {1044-7318},
  pages     = {181 -- 198},
  year      = {2002},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Entwicklung und Evaluation eines groupware-basierten Unterst{\"u}tzungssystems f{\"u}r verfahrenstechnische Entwickler / Wolf, M.; Foltz, C.; Schlick, C.; Luczak, H.},
  series = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  journal   = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  publisher = {GfA-Press},
  address   = {Dortmund},
  isbn      = {3-9806222-5-8},
  pages     = {95 -- 98},
  year      = {2000},
  language  = {de}
}
@article{WolfFoltzSchlicketal.1999,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Groupware support for chemical process design / Wolf, M.; Foltz, C.; Schlick, C.; Luczak, H.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {343 -- 347},
  year      = {1999},
  language  = {en}
}
@article{WolfFoltzLuczaketal.2000,
  author    = {Wolf, Martin and Foltz, Christian and Luczak, Holger and Eggersmann, M.},
  title     = {Entwurf eines Referenzszenarios zur Analyse und Gestaltung von Entwicklungsprozessen in der verfahrenstechnischen Industrie / Foltz, C.; Wolf, M.; Luczak, H.; Eggersmann, M.; Schneider, R.; Marquardt, W.},
  series = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  journal   = {Komplexe Arbeitssysteme - Herausforderung f{\"u}r Analyse und Gestaltung : Bericht zum 46. Arbeitswissenschaftlichen Kongress der Gesellschaft f{\"u}r Arbeitswissenschaft vom 15. - 18. M{\"a}rz 2000 ; [Technische Universit{\"a}t Berlin]},
  publisher = {GfA-Press},
  address   = {Dortmund},
  isbn      = {3-9806222-5-8},
  pages     = {545 -- 548},
  year      = {2000},
  language  = {de}
}
@incollection{WolfFoltzLuczak2003,
  author    = {Wolf, Martin and Foltz, Christian and Luczak, Holger},
  title     = {Gestaltung und Evaluation eines Groupware-Konzepts},
  series = {Modelle, Werkzeuge und Infrastrukturen zur Unterst{\"u}tzung von Entwicklungsprozessen},
  booktitle = {Modelle, Werkzeuge und Infrastrukturen zur Unterst{\"u}tzung von Entwicklungsprozessen},
  editor    = {Nagl, Manfred},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {3-527-27769-2},
  pages     = {359 -- 360},
  year      = {2003},
  language  = {de}
}
@article{WolfFoltzKillichetal.2001,
  author    = {Wolf, Martin and Foltz, Christian and Killich, Stephan and Schmidt, Ludger},
  title     = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger},
  series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  journal   = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  publisher = {-},
  isbn      = {0-8058-3608-X},
  pages     = {172 -- 176},
  year      = {2001},
  language  = {en}
}
@book{WolfFoltzKillich2000,
  author    = {Wolf, Martin and Foltz, Christian and Killich, S.},
  title     = {K3 User Guide},
  publisher = {RWTH},
  address   = {Aachen},
  pages     = {1 -- 13},
  year      = {2000},
  language  = {en}
}
@article{WolfBiesenGreeb2014,
  author    = {Wolf, Martin and Biesen, Ina van der and Greeb, Birgit},
  title     = {Mein Freund, die Uni},
  series = {Die neue Hochschule : DNH : f{\"u}r anwendungsbezogene Wissenschaft und Kunst},
  volume    = {2014},
  journal   = {Die neue Hochschule : DNH : f{\"u}r anwendungsbezogene Wissenschaft und Kunst},
  number    = {2},
  publisher = {HLB},
  address   = {Bonn},
  issn      = {0340-448X},
  pages     = {54 -- 56},
  year      = {2014},
  language  = {de}
}
@inproceedings{WolfBartonHerrmannetal.2019,
  author    = {Wolf, Martin and Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  title     = {Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule f{\"u}r Angewandte Wissenschaften Aachen / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian M{\"u}ller, Christian Seel},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-62-4},
  doi       = {10.15771/978-3-944330-62-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:526-opus4-13026},
  pages     = {261 Seiten},
  year      = {2019},
  abstract  = {Tagungsbeitr{\"a}ge aus den Bereichen Projektmanagement, Didaktik in der Wirtschaftsinformatik, IT-Sicherheit, Anwendungsf{\"a}lle, Reifegradmodelle, Plattformen f{\"u}r Gesch{\"a}ftsprozesse und Prototypen.},
  language  = {de}
}
@article{WolfArmbrusterSchlicketal.1997,
  author    = {Wolf, Martin and Armbruster, S. and Schlick, Christopher and Simon, S.},
  title     = {Markt{\"u}bersicht Telekooperationssysteme - Das IAW stellt im Internet umfangreiche Informationen {\"u}ber Telekooperationssysteme zur Verf{\"u}gung / Wolf, M. ; Armbruster, S. ; Schlick, C. ; Simon, S.},
  series = {FIR + IAW Mitteilungen. 29 (1997), H. 1},
  journal   = {FIR + IAW Mitteilungen. 29 (1997), H. 1},
  publisher = {-},
  pages     = {11 -- 12},
  year      = {1997},
  language  = {de}
}
@article{WolfArmbrusterSchlicketal.1997,
  author    = {Wolf, Martin and Armbruster, S. and Schlick, Christopher and Simon, S.},
  title     = {Markt{\"u}bersicht Telekooperationssysteme / Wolf, M.; Armbruster, S.; Schlick, C.; Simon, S.},
  series = {Elsa Insight (1997)},
  journal   = {Elsa Insight (1997)},
  publisher = {-},
  pages     = {8 -- 9},
  year      = {1997},
  language  = {de}
}
@article{WolfAltgen2013,
  author    = {Wolf, Martin and Altgen, Jannik},
  title     = {IT Service Management in der Region Aachen : White Paper},
  pages     = {1 -- 13},
  year      = {2013},
  language  = {de}
}
@article{Wolf2003,
  author    = {Wolf, Martin},
  title     = {Risiko- und Maßnahmenmanagement bei der Computervalidierung},
  series = {Pharma-Technologie-Journal (2003)},
  journal   = {Pharma-Technologie-Journal (2003)},
  publisher = {-},
  isbn      = {0931-9700},
  pages     = {50 -- 62},
  year      = {2003},
  language  = {de}
}
@book{Wolf2002,
  author    = {Wolf, Martin},
  title     = {Entwicklung und Evaluation eines Groupware-Systems zur Unterst{\"u}tzung verfahrenstechnischer Entwicklungsprozesse},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8322-0629-9},
  pages     = {X, 250 S. : graph. Darst.},
  year      = {2002},
  language  = {de}
}
@article{Wolf2000,
  author    = {Wolf, Martin},
  title     = {Groupware related task design},
  series = {ACM SIGGROUP Bulletin. 21 (2000), H. 2},
  journal   = {ACM SIGGROUP Bulletin. 21 (2000), H. 2},
  publisher = {-},
  pages     = {5 -- 8},
  year      = {2000},
  language  = {en}
}
@article{Wolf2012,
  author    = {Wolf, Martin},
  title     = {Von Security Awareness zum Secure Behaviour},
  series = {Hakin9 Extra - IT-Forensik},
  volume    = {2012},
  journal   = {Hakin9 Extra - IT-Forensik},
  number    = {5},
  publisher = {Software Wydawnictwo},
  address   = {Warszawa},
  issn      = {1733-7186},
  pages     = {18 -- 19},
  year      = {2012},
  abstract  = {Security Awareness ist derzeit ein viel diskutiertes Thema. Es reicht nicht, einfach nur ein paar technische Systeme (z.B. Firewalls) zu installieren, um ein angemessenes Schutzniveau zu erzielen. Neben einer guten Organisation von IT Security ist es auch notwendig, den Mitarbeiter einzubinden. Der vielzitierte "Faktor Mensch" ist derjenige, der die Technik korrekt anwenden muss und der durch falsches Verhalten technische und organisatorische Schutzmaßnahmen aushebeln kann. Deshalb reicht es nicht aus, wenn sich der Mitarbeiter der Gefahren bewusst ("aware") ist, er muss auch dementsprechend "sicher" handeln.},
  language  = {de}
}
@article{Wolf2000,
  author    = {Wolf, Martin},
  title     = {Groupware related task design},
  series = {ACM SIGGROUP Bulletin},
  volume    = {21},
  journal   = {ACM SIGGROUP Bulletin},
  number    = {2},
  issn      = {2372-7403},
  doi       = {10.1145/605660.605662},
  pages     = {5 -- 8},
  year      = {2000},
  abstract  = {his report summarizes the results of a workshop on Groupware related task design which took place at the International Conference on Supporting Group Work Group'99, Arizona, from 14 th to 17 th November 1999. The workshop was addressed to people from different viewpoints, backgrounds, and domains: - Researchers dealing with questions of task analysis and task modeling for Groupware application from an academic point of view. They may contribute modelbased design approaches or theoretically oriented work - Practitioners with experience in the design and everyday use of groupware systems. They might refer to the practical side of the topic: "real" tasks, "real" problems, "real" users, etc.},
  language  = {en}
}
@inproceedings{WittigRuettersBragard2024,
  author    = {Wittig, M. and R{\"u}tters, Ren{\´e} and Bragard, Michael},
  title     = {Application of RL in control systems using the example of a rotatory inverted pendulum},
  series = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  booktitle = {Tagungsband AALE 2024 : Fit f{\"u}r die Zukunft: praktische L{\"o}sungen f{\"u}r die industrielle Automation},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-02-3},
  doi       = {10.33968/2024.53},
  pages     = {241 -- 248},
  year      = {2024},
  abstract  = {In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.},
  language  = {en}
}
@article{WissenBogdanskiScheeretal.2005,
  author    = {Wissen, M. and Bogdanski, N. and Scheer, H.-C. and Bitz, Andreas and Ahrens, G. and Gruetzner, G.},
  title     = {Implication of the light polarisation for UV curing of pre-patterned resists},
  series = {Microelectronic Engineering},
  volume    = {78-79},
  journal   = {Microelectronic Engineering},
  issn      = {0167-9317},
  doi       = {10.1016/j.mee.2004.12.099},
  pages     = {659 -- 664},
  year      = {2005},
  language  = {en}
}
@inproceedings{WiegnerVolkerMainzetal.2022,
  author    = {Wiegner, Jonas and Volker, Hanno and Mainz, Fabian and Backes, Andreas and L{\"o}ken, Michael and H{\"u}ning, Felix},
  title     = {Wiegand-effect-powered wireless IoT sensor node},
  series = {Sensoren und Messsysteme 2022},
  booktitle = {Sensoren und Messsysteme 2022},
  publisher = {VDE Verlag GmbH},
  address   = {Berlin},
  isbn      = {978-3-8007-5835-7},
  pages     = {255 -- 260},
  year      = {2022},
  abstract  = {In this article we describe an Internet-of-Things sensing device with a wireless interface which is powered by the oftenoverlooked harvesting method of the Wiegand effect. The sensor can determine position, temperature or other resistively measurable quantities and can transmit the data via an ultra-low power ultra-wideband (UWB) data transmitter. With this approach we can energy-self-sufficiently acquire, process, and wirelessly transmit data in a pulsed operation. A proof-of-concept system was built up to prove the feasibility of the approach. The energy consumption of the system is analyzed and traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof-of-concept, an application demonstrator was developed. Finally, we point out possible use cases.},
  language  = {en}
}
@article{WiegnerVolkerMainzetal.2023,
  author    = {Wiegner, Jonas and Volker, Hanno and Mainz, Fabian and Backes, Andreas and Loeken, Michael and H{\"u}ning, Felix},
  title     = {Energy analysis of a wireless sensor node powered by a Wiegand sensor},
  series = {Journal of Sensors and Sensor Systems (JSSS)},
  volume    = {12},
  journal   = {Journal of Sensors and Sensor Systems (JSSS)},
  number    = {1},
  publisher = {Copernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {2194-878X},
  doi       = {10.5194/jsss-12-85-2023},
  pages     = {85 -- 92},
  year      = {2023},
  abstract  = {This article describes an Internet of things (IoT) sensing device with a wireless interface which is powered by the energy-harvesting method of the Wiegand effect. The Wiegand effect, in contrast to continuous sources like photovoltaic or thermal harvesters, provides small amounts of energy discontinuously in pulsed mode. To enable an energy-self-sufficient operation of the sensing device with this pulsed energy source, the output energy of the Wiegand generator is maximized. This energy is used to power up the system and to acquire and process data like position, temperature or other resistively measurable quantities as well as transmit these data via an ultra-low-power ultra-wideband (UWB) data transmitter. A proof-of-concept system was built to prove the feasibility of the approach. The energy consumption of the system during start-up was analysed, traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof of concept, an application prototype was developed.},
  language  = {en}
}
@misc{WiegnerVolkerMainzetal.2022,
  author    = {Wiegner, J. and Volker, H. and Mainz, F. and Backes, A. and L{\"o}ken, M. and H{\"u}ning, Felix},
  title     = {Wiegand-Effect-Powered Wireless IT Sensor Node},
  year      = {2022},
  abstract  = {With the growing interest in small distributed sensors for the "Internet of Things", more attention is being paid to energy harvesting techologies. Reducing or eliminating the need for external power sources or batteries make devices more self-sufficient, more reliable, and reduces maintenance requirements. The Wiegand effect is a proven technology for harvesting small amounts of electrical power from mechanical motion.},
  language  = {en}
}
@inproceedings{WeberWolf2017,
  author    = {Weber, Niklas and Wolf, Martin},
  title     = {Datenerhebung f{\"u}r die CDG-Forschung},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)},
  editor    = {Barton, Thomas},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {218 -- 227},
  year      = {2017},
  language  = {de}
}
@inproceedings{WangMensingGligorevicetal.2008,
  author    = {Wang, W. and Mensing, C. and Gligorevic, Snjezana and Jost, T. and Dammann, A.},
  title     = {Short term statistical analysis of outdoor to indoor propagation channel for geolocations},
  series = {Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts},
  booktitle = {Proceedings of the 13th International OFDM Workshop : (InOWo '08), Aug. 27./28. 2008, Hamburg : Session 3A: Systems concepts},
  organization    = {International OFDM Workshop <13, 2008, Hamburg>},
  pages     = {85 -- 89},
  year      = {2008},
  language  = {en}
}
@inproceedings{WalterElsenMuelleretal.1999,
  author    = {Walter, Peter and Elsen, Ingo and M{\"u}ller, Holger and Kraiss, Karl-Friedrich},
  title     = {3D object recognition with a specialized mixtures of experts architecture},
  series = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  booktitle = {IJCNN'99. International Joint Conference on Neural Networks. Proceedings},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {0-7803-5529-6},
  issn      = {1098-7576},
  doi       = {10.1109/IJCNN.1999.836243},
  pages     = {3563 -- 3568},
  year      = {1999},
  abstract  = {Aim of the AXON2 project (Adaptive Expert System for Object Recogniton using Neuml Networks) is the development of an object recognition system (ORS) capable of recognizing isolated 3d objects from arbitrary views. Commonly, classification is based on a single feature extracted from the original image. Here we present an architecture adapted from the Mixtures of Eaqerts algorithm which uses multiple neuml networks to integmte different features. During tmining each neural network specializes in a subset of objects or object views appropriate to the properties of the corresponding feature space. In recognition mode the system dynamically chooses the most relevant features and combines them with maximum eficiency. The remaining less relevant features arz not computed and do therefore not decelerate the-recognition process. Thus, the algorithm is well suited for ml-time applications.},
  language  = {en}
}
@inproceedings{WalterGligorevicDetertetal.2010,
  author    = {Walter, Michael and Gligorevic, Snjezana and Detert, Thorben and Schnell, Michael},
  title     = {UHF/VHF air-to-air propagation measurements},
  series = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  booktitle = {Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4244-6431-9 ; 978-84-7653-472-4},
  pages     = {1 -- 5},
  year      = {2010},
  language  = {en}
}
@inproceedings{WallnoeferDrathHuening2015,
  author    = {Walln{\"o}fer, Armin and Drath, Rainer and H{\"u}ning, Felix},
  title     = {Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen},
  series = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  booktitle = {Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-18-092258-4},
  pages     = {1 CD-ROM},
  year      = {2015},
  language  = {de}
}
@article{WallenbornRitz2014,
  author    = {Wallenborn, Ramona and Ritz, Thomas},
  title     = {Mobilit{\"a}t miteinander teilen : st{\"a}dtisches eCarsharing in einer vernetzten Gesellschaft ; [vernetztes Fahren von morgen]},
  series = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  volume    = {5},
  journal   = {Neue Mobilit{\"a}t : das Magazin vom Bundesverband eMobilit{\"a}t},
  number    = {14 (Herbstausg.)},
  publisher = {Bundesverband eMobilit{\"a}t BEM},
  address   = {Berlin},
  issn      = {2191-5636},
  pages     = {92 -- 95},
  year      = {2014},
  language  = {de}
}
@inproceedings{WalentaSchellekensFerreinetal.2017,
  author    = {Walenta, Robert and Schellekens, Twan and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A decentralised system approach for controlling AGVs with ROS},
  series = {AFRICON, Proceedings},
  booktitle = {AFRICON, Proceedings},
  publisher = {IEEE},
  isbn      = {978-1-5386-2775-4},
  issn      = {2153-0033},
  doi       = {10.1109/AFRCON.2017.8095693},
  pages     = {1436 -- 1441},
  year      = {2017},
  language  = {en}
}
@article{VosLagemaatBarentszetal.2014,
  author    = {Vos, E. K. and Lagemaat, M. W. and Barentsz, J. O. and F{\"u}tterer, J. J. and Zamecnik, P. and Roozen, H. and Orzada, S. and Bitz, Andreas and Maas, M. C. and Scheenen, T. W. J.},
  title     = {Image quality and cancer visibility of T2-weighted Magnetic Resonance Imaging of the prostate at 7 Tesla},
  series = {European Radiology},
  volume    = {24},
  journal   = {European Radiology},
  number    = {8},
  publisher = {Springer},
  address   = {Cham},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-014-3234-6},
  pages     = {1950 -- 1958},
  year      = {2014},
  abstract  = {Objectives To assess the image quality of T2-weighted (T2w) magnetic resonance imaging of the prostate and the visibility of prostate cancer at 7 Tesla (T). Materials \& methods Seventeen prostate cancer patients underwent T2w imaging at 7T with only an external transmit/receive array coil. Three radiologists independently scored images for image quality, visibility of anatomical structures, and presence of artefacts. Krippendorff's alpha and weighted kappa statistics were used to assess inter-observer agreement. Visibility of prostate cancer lesions was assessed by directly linking the T2w images to the confirmed location of prostate cancer on histopathology. Results T2w imaging at 7T was achievable with 'satisfactory' (3/5) to 'good' (4/5) quality. Visibility of anatomical structures was predominantly scored as 'satisfactory' (3/5) and 'good' (4/5). If artefacts were present, they were mostly motion artefacts and, to a lesser extent, aliasing artefacts and noise. Krippendorff's analysis revealed an α = 0.44 between three readers for the overall image quality scores. Clinically significant cancer lesions in both peripheral zone and transition zone were visible at 7T. Conclusion T2w imaging with satisfactory to good quality can be routinely acquired, and cancer lesions were visible in patients with prostate cancer at 7T using only an external transmit/receive body array coil.},
  language  = {en}
}
@article{VorstFerreinLakemeyer2006,
  author    = {Vorst, Phillip and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {AllemaniACs3D team description},
  pages     = {1 -- 6},
  year      = {2006},
  language  = {en}
}
@inproceedings{ViehmannLimpertHofmannetal.2023,
  author    = {Viehmann, Tarik and Limpert, Nicolas and Hofmann, Till and Henning, Mike and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup logistics league with visual servoing and centralized goal reasoning},
  series = {RoboCup 2022},
  booktitle = {RoboCup 2022},
  editor    = {Eguchi, Amy and Lau, Nuno and Paetzel-Pr{\"u}smann, Maike and Wanichanon, Thanapat},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-28468-7 (Print)},
  doi       = {https://doi.org/10.1007/978-3-031-28469-4_25},
  pages     = {300 -- 312},
  year      = {2023},
  abstract  = {The RoboCup Logistics League (RCLL) is a robotics competition in a production logistics scenario in the context of a Smart Factory. In the competition, a team of three robots needs to assemble products to fulfill various orders that are requested online during the game. This year, the Carologistics team was able to win the competition with a new approach to multi-agent coordination as well as significant changes to the robot's perception unit and a pragmatic network setup using the cellular network instead of WiFi. In this paper, we describe the major components of our approach with a focus on the changes compared to the last physical competition in 2019.},
  language  = {en}
}
@article{VergePoettgenAltherretal.2016,
  author    = {Verg{\´e}, Angela and P{\"o}ttgen, Philipp and Altherr, Lena and Ederer, Thorsten and Pelz, Peter F.},
  title     = {Lebensdauer als Optimierungsziel: Algorithmische Struktursynthese am Beispiel eines hydrostatischen Getriebes},
  series = {O+P - {\"O}lhydraulik und Pneumatik},
  volume    = {60},
  journal   = {O+P - {\"O}lhydraulik und Pneumatik},
  number    = {1-2},
  editor    = {Greuloch, Ivo and Weber, Manfred and Meier, Miles},
  publisher = {Vereinigte Fachverl.},
  address   = {Mainz},
  issn      = {1614-9602},
  pages     = {114 -- 121},
  year      = {2016},
  abstract  = {Verf{\"u}gbarkeit und Nachhaltigkeit sind wichtige Anforderungen bei der Planung langlebiger technischer Systeme. Meist werden bei Lebensdaueroptimierungen lediglich einzelne Komponenten vordefinierter Systeme untersucht. Ob eine optimale Lebensdauer eine g{\"a}nzlich andere Systemvariante bedingt, wird nur selten hinterfragt. Technical Operations Research (TOR) erlaubt es, aus Obermengen technischer Systeme automatisiert die lebensdaueroptimale Systemstruktur auszuw{\"a}hlen. Der Artikel zeigt dies am Beispiel eines hydrostatischen Getriebes.},
  language  = {de}
}
@inproceedings{UsaiCorucciGligorevicetal.2011,
  author    = {Usai, Pierpaolo and Corucci, Alessandro and Gligorevic, Snjezana and Monorchio, Agostino},
  title     = {Estimation of airport surface propagation channel: ray tracing model and measurements},
  series = {Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP) : 11 - 15 April 2011, Rome, Italy},
  booktitle = {Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP) : 11 - 15 April 2011, Rome, Italy},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4577-0250-1},
  pages     = {1634 -- 1638},
  year      = {2011},
  language  = {en}
}
@article{UmutluOrzadaKinneretal.2011,
  author    = {Umutlu, Lale and Orzada, Stephan and Kinner, Sonja and Maderwald, Stefan and Bronte, Irina and Bitz, Andreas and Kraff, Oliver and Ladd, Susanne C. and Antoch, Gerald and Ladd, Mark E. and Quick, Harald H. and Lauenstein, Thomas C.},
  title     = {Renal imaging at 7 Tesla: preliminary results},
  series = {European Radiology},
  volume    = {21},
  journal   = {European Radiology},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1084},
  pages     = {841 -- 849},
  year      = {2011},
  abstract  = {Objective To investigate the feasibility of 7T MR imaging of the kidneys utilising a custom-built 8-channel transmit/receive radiofrequency body coil. Methods In vivo unenhanced MR was performed in 8 healthy volunteers on a 7T whole-body MR system. After B0 shimming the following sequences were obtained: 1) 2D and 3D spoiled gradient-echo sequences (FLASH, VIBE), 2) T1-weighted 2D in and opposed phase 3) True-FISP imaging and 4) a T2-weighted turbo spin echo (TSE) sequence. Visual evaluation of the overall image quality was performed by two radiologists. Results Renal MRI at 7T was feasible in all eight subjects. Best image quality was found using T1-weighted gradient echo MRI, providing high anatomical details and excellent conspicuity of the non-enhanced vasculature. With successful shimming, B1 signal voids could be effectively reduced and/or shifted out of the region of interest in most sequence types. However, T2-weighted TSE imaging remained challenging and strongly impaired because of signal heterogeneities in three volunteers. Conclusion The results demonstrate the feasibility and diagnostic potential of dedicated 7T renal imaging. Further optimisation of imaging sequences and dedicated RF coil concepts are expected to improve the acquisition quality and ultimately provide high clinical diagnostic value.},
  language  = {en}
}
@article{UmutluKraffFischeretal.2013,
  author    = {Umutlu, Lale and Kraff, Oliver and Fischer, Anja and Kinner, Sonja and Maderwald, Stefan and Nassenstein, Kai and Nensa, Felix and Gr{\"u}neisen, Johannes and Orzada, Stephan and Bitz, Andreas and Forsting, Michael and Ladd, Mark E. and Lauenstein, Thomas C.},
  title     = {Seven-Tesla MRI of the female pelvis},
  series = {European Radiology},
  volume    = {23},
  journal   = {European Radiology},
  number    = {9},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-013-2868-0},
  pages     = {2364 -- 2373},
  year      = {2013},
  language  = {en}
}
@article{UmutluBitzMaderwaldetal.2013,
  author    = {Umutlu, Lale and Bitz, Andreas and Maderwald, Stefan and Orzada, Stephan and Kinner, Sonja and Kraff, Oliver and Brote, Irina and Ladd, Susanne C. and Schroeder, Tobias and Forsting, Michael},
  title     = {Contrast-enhanced ultra-high-field liver MRI: a feasibility trial},
  series = {European Journal of Radiology},
  volume    = {82},
  journal   = {European Journal of Radiology},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0720-048X},
  doi       = {10.1016/j.ejrad.2011.07.004},
  pages     = {760 -- 767},
  year      = {2013},
  language  = {en}
}
@article{UmutluMaderwaldKinneretal.2013,
  author    = {Umutlu, L. and Maderwald, S. and Kinner, S. and Kraff, O. and Bitz, Andreas and Orzada, S. and Johst, S. and Wrede, K. and Forsting, M. and Ladd, M. E. and Lauenstein, T. C. and Quick, H. H.},
  title     = {First-pass contrast-enhanced renal MRA at 7 Tesla: initial results},
  series = {European Radiology},
  volume    = {23},
  journal   = {European Radiology},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1084},
  doi       = {10.1007/s00330-012-2666-0},
  pages     = {1059 -- 1066},
  year      = {2013},
  language  = {en}
}
@article{TurdumamatovBeldaHeuermann2024,
  author    = {Turdumamatov, Samat and Belda, Aljoscha and Heuermann, Holger},
  title     = {Shaping a decoupled atmospheric pressure microwave plasma with antenna structures, Maxwell's equations, and boundary conditions},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {0093-3813 (Print)},
  doi       = {10.1109/TPS.2024.3383589},
  pages     = {1 -- 9},
  year      = {2024},
  abstract  = {This article addresses the need for an innovative technique in plasma shaping, utilizing antenna structures, Maxwell's laws, and boundary conditions within a shielded environment. The motivation lies in exploring a novel approach to efficiently generate high-energy density plasma with potential applications across various fields. Implemented in an E01 circular cavity resonator, the proposed method involves the use of an impedance and field matching device with a coaxial connector and a specially optimized monopole antenna. This setup feeds a low-loss cavity resonator, resulting in a high-energy density air plasma with a surface temperature exceeding 3500 o C, achieved with a minimal power input of 80 W. The argon plasma, resembling the shape of a simple monopole antenna with modeled complex dielectric values, offers a more energy-efficient alternative compared to traditional, power-intensive plasma shaping methods. Simulations using a commercial electromagnetic (EM) solver validate the design's effectiveness, while experimental validation underscores the method's feasibility and practical implementation. Analyzing various parameters in an argon atmosphere, including hot S -parameters and plasma beam images, the results demonstrate the successful application of this technique, suggesting its potential in coating, furnace technology, fusion, and spectroscopy applications.},
  language  = {en}
}
@inproceedings{TischbeinKeanVertgewalletal.2023,
  author    = {Tischbein, Franziska and Kean, Kilian and Vertgewall, Chris Martin and Ulbig, Andreas and Altherr, Lena},
  title     = {Determination of the topology of low-voltage distribution grids using cluster methods},
  series = {27th International Conference on Electricity Distribution (CIRED 2023)},
  booktitle = {27th International Conference on Electricity Distribution (CIRED 2023)},
  publisher = {IEEE},
  isbn      = {978-1-83953-855-1},
  doi       = {10.1049/icp.2023.0478},
  pages     = {1 -- 5},
  year      = {2023},
  abstract  = {Due to the decarbonization of the energy sector, the electric distribution grids are undergoing a major transformation, which is expected to increase the load on the operating resources due to new electrical loads and distributed energy resources. Therefore, grid operators need to gradually move to active grid management in order to ensure safe and reliable grid operation. However, this requires knowledge of key grid variables, such as node voltages, which is why the mass integration of measurement technology (smart meters) is necessary. Another problem is the fact that a large part of the topology of the distribution grids is not sufficiently digitized and models are partly faulty, which means that active grid operation management today has to be carried out largely blindly. It is therefore part of current research to develop methods for determining unknown grid topologies based on measurement data. In this paper, different clustering algorithms are presented and their performance of topology detection of low voltage grids is compared. Furthermore, the influence of measurement uncertainties is investigated in the form of a sensitivity analysis.},
  language  = {en}
}
@inproceedings{ThomeCzarneckiAuthetal.2017,
  author    = {Thom{\´e}, Tristan Eberhard and Czarnecki, Christian and Auth, Gunnar and Bensberg, Frank},
  title     = {Erweiterung des Referenzprozessmodells eTOM um die Anforderungen des deutschen IT-Sicherheitsgesetzes},
  series = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik},
  booktitle = {Prozesse, Technologie, Anwendungen, Systeme und Management 2017. Angewandte Forschung in der Wirtschaftsinformatik},
  editor    = {Barton, Thomas and Herrmann, Frank and Meister, Vera G. and M{\"u}ller, Christian and Seel, Christian},
  publisher = {mana-Buch},
  address   = {Heide},
  isbn      = {978-3-944330-56-3},
  pages     = {51 -- 60},
  year      = {2017},
  abstract  = {Kritische Infrastrukturen sind prim{\"a}re Ziele krimineller Hacker. Der Deutsche Bundestag reagierte darauf am 25. Juli 2015 mit einem Gesetz zur Verbesserung der Sicherheit von ITSystemen, dem IT-Sicherheitsgesetz. Dies verlangt von Betreibern kritischer Infrastrukturen, angemessene Mindeststandards f{\"u}r organisatorische und technische Sicherheit zu implementieren, um den Betrieb und die Verf{\"u}gbarkeit dieser Infrastruktur zu gew{\"a}hrleisten. Telekommunikationsunternehmen sind einerseits von diesem Gesetz in besonderem Maße betroffen und verf{\"u}gen andererseits mit dem Rahmenwerk enhanced Telecom Operations Map (eTOM) {\"u}ber ein international anerkanntes Referenzmodell zur Gestaltung von Gesch{\"a}ftsprozessen in dieser Branche. Da s{\"a}mtliche Telekommunikationsunternehmen in Deutschland verpflichtet sind, das Gesetz innerhalb eines bestimmten Zeitrahmens zu implementieren, pr{\"a}sentiert dieser Beitrag einen Vorschlag zur Erweiterung von eTOM um die relevanten Anforderungen des deutschen IT-Sicherheitsgesetzes.},
  language  = {de}
}
@techreport{ThomaLaarmannMerkensetal.2020,
  author    = {Thoma, Andreas and Laarmann, Lukas and Merkens, Torsten and Franzke, Till and M{\"o}hren, Felix and Buttermann, Lilly and van der Weem, Dirk and Fischer, Maximilian and Misch, Philipp and B{\"o}hme, Mirijam and R{\"o}th, Thilo and Hebel, Christoph and Ritz, Thomas and Franke, Marina and Braun, Carsten},
  title     = {Entwicklung eines intermodalen Mobilit{\"a}tskonzeptes f{\"u}r die Pilotregion NRW/Rhein-Maas Euregio und Schaffung voller Kundenakzeptanz durch Transfer von Standards aus dem PKW-Bereich auf ein Flugtaxi : Schlussbericht : Projektakronym: SkyCab (Kategorie B) : Laufzeit in Monaten: 6 : Hauptthema: Kategorie B: Innovative Ideen mit Bezug zu UAS/Flugtaxis},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {97 Seiten},
  year      = {2020},
  language  = {de}
}
@article{TheysohnKraffEilersetal.2014,
  author    = {Theysohn, Jens M. and Kraff, Oliver and Eilers, Kristina and Andrade, Dorian and Gerwig, Marcus and Timmann, Dagmar and Schmitt, Franz and Ladd, Mark E. and Ladd, Susanne C. and Bitz, Andreas},
  title     = {Vestibular effects of a 7 Tesla MRI examination compared to 1.5 T and 0 T in healthy volunteers},
  series = {PLoS one},
  volume    = {9},
  journal   = {PLoS one},
  number    = {3},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0092104},
  pages     = {e92104},
  year      = {2014},
  abstract  = {Ultra-high-field MRI (7 Tesla (T) and above) elicits more temporary side-effects compared to 1.5 T and 3 T, e.g. dizziness or "postural instability" even after exiting the scanner. The current study aims to assess quantitatively vestibular performance before and after exposure to different MRI scenarios at 7 T, 1.5 T and 0 T. Sway path and body axis rotation (Unterberger's stepping test) were quantitatively recorded in a total of 46 volunteers before, 2 minutes after, and 15 minutes after different exposure scenarios: 7 T head MRI (n = 27), 7 T no RF (n = 22), 7 T only B₀ (n = 20), 7 T in \& out B₀ (n = 20), 1.5 T no RF (n = 20), 0 T (n = 15). All exposure scenarios lasted 30 minutes except for brief one minute exposure in 7 T in \& out B₀. Both measures were documented utilizing a 3D ultrasound system. During sway path evaluation, the experiment was repeated with eyes both open and closed. Sway paths for all long-lasting 7 T scenarios (normal, no RF, only B₀) with eyes closed were significantly prolonged 2 minutes after exiting the scanner, normalizing after 15 minutes. Brief exposure to 7 T B₀ or 30 minutes exposure to 1.5 T or 0 T did not show significant changes. End positions after Unterberger's stepping test were significantly changed counter-clockwise after all 7 T scenarios, including the brief in \& out B₀ exposure. Shorter exposure resulted in a smaller alteration angle. In contrast to sway path, reversal of changes in body axis rotation was incomplete after 15 minutes. 1.5 T caused no rotational changes. The results show that exposure to the 7 Tesla static magnetic field causes only a temporary dysfunction or "over-compensation" of the vestibular system not measurable at 1.5 or 0 Tesla. Radiofrequency fields, gradient switching, and orthostatic dysregulation do not seem to play a role.},
  language  = {en}
}
@article{SunAltherrPeietal.2018,
  author    = {Sun, Hui and Altherr, Lena and Pei, Ji and Pelz, Peter F. and Yuan, Shouqi},
  title     = {Optimal booster station design and operation under uncertain load},
  series = {Applied Mechanics and Materials},
  volume    = {885},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.885.102},
  pages     = {102 -- 115},
  year      = {2018},
  abstract  = {Given industrial applications, the costs for the operation and maintenance of a pump system typically far exceed its purchase price. For finding an optimal pump configuration which minimizes not only investment, but life-cycle costs, methods like Technical Operations Research which is based on Mixed-Integer Programming can be applied. However, during the planning phase, the designer is often faced with uncertain input data, e.g. future load demands can only be estimated. In this work, we deal with this uncertainty by developing a chance-constrained two-stage (CCTS) stochastic program. The design and operation of a booster station working under uncertain load demand are optimized to minimize total cost including purchase price, operation cost incurred by energy consumption and penalty cost resulting from water shortage. We find optimized system layouts using a sample average approximation (SAA) algorithm, and analyze the results for different risk levels of water shortage. By adjusting the risk level, the costs and performance range of the system can be balanced, and thus the system's resilience can be engineered},
  language  = {en}
}
@article{SukhotinaStreckertBitzetal.2006,
  author    = {Sukhotina, Irina and Streckert, Joachim R. and Bitz, Andreas and Hansen, Volkert W. and Lerchl, Alexander},
  title     = {1800 MHz electromagnetic field effects on melatonin release from isolated pineal glands},
  series = {Journal of Pineal Research},
  volume    = {40},
  journal   = {Journal of Pineal Research},
  number    = {1},
  issn      = {1600-079X},
  doi       = {10.1111/j.1600-079X.2005.00284.x},
  pages     = {86 -- 91},
  year      = {2006},
  language  = {en}
}
@inproceedings{StoebeHoefkenSchubaetal.2013,
  author    = {St{\"o}be, Rolf and H{\"o}fken, Hans-Wilhelm and Schuba, Marko and Breuer, Michael},
  title     = {Artificial ageing of mobile devices using a simulated GSM/GPRS network},
  series = {Eighth International Conference on Availability, Reliability and Security (ARES) : 2-6 Sept. 2013, Regensburg},
  booktitle = {Eighth International Conference on Availability, Reliability and Security (ARES) : 2-6 Sept. 2013, Regensburg},
  publisher = {IEEE},
  pages     = {493 -- 497},
  year      = {2013},
  language  = {en}
}
@inproceedings{StopforthFerreinSteinbauer2015,
  author    = {Stopforth, Riaan and Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center},
  series = {ICRA 2015 Developing Countries Forum},
  booktitle = {ICRA 2015 Developing Countries Forum},
  pages     = {3 S.},
  year      = {2015},
  abstract  = {Mechatronics consist of the integration of mechanical engineering, electronic integration and computer science/ engineering. These broad fields are essential for robotic systems, yet it makes it difficult for the researchers to specialize and be experts in all these fields. Collaboration between researchers allow for the integration of experience and specialization, to allow optimized systems. Collaboration between the European countries and South Africa is critical, as each country has different resources available, which the other countries might not have. Applications with the need for approval of any restrictions, can also be obtained easier in some countries compared to others, thus preventing the delays of research. Some problems that have been experienced are discussed, with the Robotics Center of South Africa as a possible solution.},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {South African robotics entity for a collaboration initiative},
  series = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  booktitle = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  publisher = {IEEE},
  isbn      = {978-1-5090-3335-5},
  doi       = {10.1109/RoboMech.2016.7813144},
  pages     = {1 -- 6},
  year      = {2017},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {Design considerations of the duo fugam dual rotor UAV},
  series = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  booktitle = {2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)},
  isbn      = {978-1-5386-2314-5},
  doi       = {10.1109/RoboMech.2017.8261115},
  pages     = {7 -- 13},
  year      = {2017},
  language  = {en}
}
@incollection{StollenwerkFranzkeMaureretal.2023,
  author    = {Stollenwerk, Dominik and Franzke, Till and Maurer, Florian and Reinkensmeier, Sebastian and Kim, Franken and Tambornino, Philipp and Haas, Florian and Rieke, Christian and Hermanuz, Andreas and Borchert, J{\"o}rg and Ritz, Thomas and Sander, Volker},
  title     = {Smarte Lades{\"a}ulen : Netz- und Marktdienliches {\"o}ffentliches Laden},
  series = {Towards the New Normal in Mobility : Technische und betriebswirtschaftliche Aspekte},
  booktitle = {Towards the New Normal in Mobility : Technische und betriebswirtschaftliche Aspekte},
  editor    = {Proff, Heike},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-39437-0 (Print)},
  doi       = {10.1007/978-3-658-39438-7_18},
  pages     = {287 -- 304},
  year      = {2023},
  abstract  = {Stand 01.01.2022 sind in Deutschland 618.460 elektrisch angetriebene KFZ zugelassen. Insgesamt sind derzeit 48.540.878 KFZ zugelassen, was einer Elektromobilit{\"a}tsquote von ca. 1,2 \% entspricht. Derzeit werden Elektromobile {\"u}ber Ladestationen oder Steckdosen mit dem Stromnetz verbunden und {\"u}blicherweise mit der vollen Ladekapazit{\"a}t des Anschlusses aufgeladen, bis das Batteriemanagementsystem des Fahrzeugs abh{\"a}ngig vom Ladezustand der Batterie die Ladeleistung reduziert.},
  language  = {de}
}
@inproceedings{SteuerDankert2023,
  author    = {Steuer-Dankert, Linda},
  title     = {A crazy little thing called sustainability},
  series = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)},
  doi       = {10.21427/9CQR-VC94},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {Achieving the 17 Sustainable Development Goals (SDGs) set by the United Nations (UN) in 2015 requires global collaboration between different stakeholders. Industry, and in particular engineers who shape industrial developments, have a special role to play as they are confronted with the responsibility to holistically reflect sustainability in industrial processes. This means that, in addition to the technical specifications, engineers must also question the effects of their own actions on an ecological, economic and social level in order to ensure sustainable action and contribute to the achievement of the SDGs. However, this requires competencies that enable engineers to apply all three pillars of sustainability to their own field of activity and to understand the global impact of industrial processes. In this context, it is relevant to understand how industry already reflects sustainability and to identify competences needed for sustainable development.},
  language  = {en}
}
@inproceedings{StephanHeuermannPrantner2016,
  author    = {Stephan, Achim and Heuermann, Holger and Prantner, Michael},
  title     = {Cutting human tissue with novel atmospheric-pressure microwave plasma jet},
  series = {46th European Microwave Conference (EuMC)},
  booktitle = {46th European Microwave Conference (EuMC)},
  publisher = {IEEE},
  isbn      = {978-2-87487-043-9},
  doi       = {10.1109/EuMC.2016.7824490},
  pages     = {902 -- 905},
  year      = {2016},
  language  = {en}
}
@incollection{StengerAltherrMuelleretal.2018,
  author    = {Stenger, David and Altherr, Lena and M{\"u}ller, Tankred and Pelz, Peter F.},
  title     = {Product family design optimization using model-based engineering techniques},
  series = {Operations Research Proceedings 2017},
  booktitle = {Operations Research Proceedings 2017},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-89919-0},
  doi       = {10.1007/978-3-319-89920-6_66},
  pages     = {495 -- 502},
  year      = {2018},
  abstract  = {Highly competitive markets paired with tremendous production volumes demand particularly cost efficient products. The usage of common parts and modules across product families can potentially reduce production costs. Yet, increasing commonality typically results in overdesign of individual products. Multi domain virtual prototyping enables designers to evaluate costs and technical feasibility of different single product designs at reasonable computational effort in early design phases. However, savings by platform commonality are hard to quantify and require detailed knowledge of e.g. the production process and the supply chain. Therefore, we present and evaluate a multi-objective metamodel-based optimization algorithm which enables designers to explore the trade-off between high commonality and cost optimal design of single products.},
  language  = {en}
}