@incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Vorbemerkung vor \S 1353}, series = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, booktitle = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, editor = {Ermann, Walter and Grunewald, Barbara and Maier-Reimer, Georg}, edition = {15., neu bearbeitete Auflage}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-47103-3}, pages = {4456 -- 4464}, year = {2017}, language = {de} } @incollection{KrollLudwigs2005, author = {Kroll-Ludwigs, Kathrin}, title = {Rechtssicherheit oder Verwirrspiel? - Die Beurteilung vorehelicher Unterhaltsverzichte nach dem Urteil des BGH vom 11.2.2004}, series = {Liber amicorum : Thomas Rauscher zum 50. Geburtstag}, booktitle = {Liber amicorum : Thomas Rauscher zum 50. Geburtstag}, editor = {Kosmehl, Guido}, publisher = {Ille und Riemer}, address = {Leipzig}, isbn = {3936308721}, pages = {95 -- 113}, year = {2005}, language = {de} } @incollection{KrollLudwigs2006, author = {Kroll-Ludwigs, Kathrin}, title = {Selbstverantwortung oder Vertrauenshaftung? - Anwendung von \S 311 II Nr. 1 BGB (c.i.c.) auf Ehevertr{\"a}ge und Angeh{\"o}rigenb{\"u}rgschaften}, series = {Verantwortung und Haftung : Leipziger Tagung, 6. bis 9. September 2006 ; Jahrbuch Junger Zivilrechtswissenschaftler 2006 ; [17. Tagung der Gesellschaft Junger Zivilrechtswissenschaftler e.V.]}, booktitle = {Verantwortung und Haftung : Leipziger Tagung, 6. bis 9. September 2006 ; Jahrbuch Junger Zivilrechtswissenschaftler 2006 ; [17. Tagung der Gesellschaft Junger Zivilrechtswissenschaftler e.V.]}, editor = {Staake, Marco}, organization = {Gesellschaft Junger Zivilrechtswissenschaftler}, pages = {118 -- 145}, year = {2006}, language = {de} } @incollection{KrollLudwigs2014, author = {Kroll-Ludwigs, Kathrin}, title = {Vorbemerkung vor \S 1353}, series = {Erman, B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug) , ErbbauRG, LPartG, ProdHaftG, VBVG, VersAus-glG und WEG}, booktitle = {Erman, B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug) , ErbbauRG, LPartG, ProdHaftG, VBVG, VersAus-glG und WEG}, editor = {Ermann, Walter, and Grunewald, Barbara and Maier-Reimer, Georg}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-50447-102-6}, year = {2014}, language = {de} } @incollection{KrollLudwigs2014, author = {Kroll-Ludwigs, Kathrin}, title = {Vorbemerkung vor \S 1297}, series = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, booktitle = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, editor = {Ermann, Walter and Grunewald, Barbara and Maier-Reimer, Georg}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-47102-6}, year = {2014}, language = {de} } @incollection{KrollLudwigs2014, author = {Kroll-Ludwigs, Kathrin}, title = {Einleitung vor \S 1297}, series = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, booktitle = {B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGG, EGBGB (Auszug), ErbbauRG, HausratsVO, LPartG, ProdHaftG, UKlaG, VAHRG und WEG}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-47102-6}, year = {2014}, language = {de} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu EU-EheG{\"u}terVO-E}, series = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, booktitle = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, editor = {Rauscher, Thomas}, edition = {4., neu bearbeitete Auflage}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-38437-1}, doi = {10.9785/9783504384371-007}, pages = {1081 -- 1146}, year = {2015}, language = {de} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu EU-LP-G{\"u}terVO}, series = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, booktitle = {Europ{\"a}isches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV}, editor = {Rauscher, Thomas}, edition = {4., neu bearbeitete Auflage}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {978-3-504-38437-1}, doi = {10.9785/9783504384371-008}, pages = {1147 -- 1188}, year = {2015}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu \S\S 1802 - 1834}, series = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, booktitle = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, editor = {Oetker, Hartmut and Rixecker, Roland and S{\"a}cker, J{\"u}rgen}, edition = {7. Auflage}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66548-6}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu \S\S 1837 - 1851}, series = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, booktitle = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, edition = {7. Auflage}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66548-6}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Kommentierung zu \S\S 1852 - 1857a}, series = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, booktitle = {M{\"u}nchener Kommentar zum BGB Band 9, Familienrecht II}, edition = {7. Auflage}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-66548-6}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Art. 48 EGBGB: Wahl eines in einem anderen Mitgliedstaat der Europ{\"a}ischen Union erworbenen Namens, Rn. 5-8, Rn. 11-14, Rn. 45-47, Rn. 48-51}, series = {Beck'scher Online-Großkommentar zum B{\"u}rgerlichen Recht (BeckOGK), Band: Internationales Privatrecht}, booktitle = {Beck'scher Online-Großkommentar zum B{\"u}rgerlichen Recht (BeckOGK), Band: Internationales Privatrecht}, editor = {Weller, Marc-Philippe and Kindler, Peter}, publisher = {C.H.Beck}, address = {M{\"u}nchen}, year = {2017}, language = {de} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Names of individuals}, series = {European Encyclopedia of Private International Law}, booktitle = {European Encyclopedia of Private International Law}, publisher = {Edward Elgar Publishing}, address = {Cheltenham, UK}, isbn = {9781782547228}, year = {2017}, language = {en} } @incollection{KrollLudwigs2017, author = {Kroll-Ludwigs, Kathrin}, title = {Small Claims Regulation}, series = {European Encyclopedia of Private International Law}, booktitle = {European Encyclopedia of Private International Law}, publisher = {Edward Elgar Publishing}, address = {Cheltenham, UK}, isbn = {9781782547228}, year = {2017}, language = {en} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Art. 5 Rom III-Regulation (choice of applicable law by the parties)}, series = {Rome Regulations : commentary}, booktitle = {Rome Regulations : commentary}, editor = {Calliess, Gralf-Peter}, edition = {2nd ed.}, publisher = {Wolters Kluwer}, isbn = {9789041147547}, year = {2015}, language = {en} } @incollection{KrollLudwigs2015, author = {Kroll-Ludwigs, Kathrin}, title = {Art. 7 Rome III-Regulation (formal validity)}, series = {Rome Regulations : commentary}, booktitle = {Rome Regulations : commentary}, editor = {Colliess, Gralf-Peter}, edition = {2nd ed.}, publisher = {Wolters Kluwer}, isbn = {9789041147547}, year = {2015}, language = {en} } @incollection{KrollLudwigs2011, author = {Kroll-Ludwigs, Kathrin}, title = {Einleitung vor \S 1297 BGB}, series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, edition = {13., neu bearb. Aufl.}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {9783504471019}, pages = {4299}, year = {2011}, language = {de} } @incollection{KrollLudwigs2011, author = {Kroll-Ludwigs, Kathrin}, title = {Vor \S 1297 bis \S 1302 BGB (Verl{\"o}bnis)}, series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, edition = {13., neu bearb. Aufl.}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {9783504471019}, year = {2011}, language = {de} } @incollection{KrollLudwigs2011, author = {Kroll-Ludwigs, Kathrin}, title = {Vor \S 1353 bis \S 1362 BGB (Allgemeine Ehewirkungen)}, series = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, booktitle = {Erman B{\"u}rgerliches Gesetzbuch : Handkommentar mit AGBG, EGBGB, ErbbauVO, HausratsVO, HausTWG, ProdHaftG, Sachen-RBerG, SchuldRAnpG, VerbrKrG. Bd. 2 Bd. 2 [\S\S 759 - 2385, ProdHaftG, ErbbauRG, VersAus-glG, VBVG, LPartG, WEG, EGBGB]}, edition = {13., neu bearb. Aufl.}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, isbn = {9783504471019}, year = {2011}, language = {de} } @incollection{KrollLudwigsRamser2008, author = {Kroll-Ludwigs, Kathrin and Ramser, Claudia}, title = {Grenzenlose Liebe}, series = {Examensklausurenkurs : 16 Examensklausuren mit ausformulierten L{\"o}sungen ; zahlreiche Originalexamensklausuren ; Zivilrecht, Strafrecht, {\"o}ffentliches Recht, Schwerpunktbereiche}, booktitle = {Examensklausurenkurs : 16 Examensklausuren mit ausformulierten L{\"o}sungen ; zahlreiche Originalexamensklausuren ; Zivilrecht, Strafrecht, {\"o}ffentliches Recht, Schwerpunktbereiche}, publisher = {de Gruyter Recht}, address = {Berlin}, isbn = {978-3-89949-455-6}, pages = {51 -- 56}, year = {2008}, language = {de} } @incollection{KruskaKuperjans1999, author = {Kruska, Martin and Kuperjans, Isabel}, title = {An{\´a}lisis Thermodin{\´a}micos : [Cap{\´i}tulo 3.3]}, series = {Uso racional de energ{\´i}a : eficiencia energ{\´e}tica y energ{\´i}as renovables. - (Manual para consultores y expertos)}, booktitle = {Uso racional de energ{\´i}a : eficiencia energ{\´e}tica y energ{\´i}as renovables. - (Manual para consultores y expertos)}, publisher = {Ministerio de Energ{\´i}a y Minas}, address = {Lima}, pages = {3.3-1 -- 3.3-15}, year = {1999}, language = {es} } @incollection{KuhlmannBettziecheRoesleretal.2005, author = {Kuhlmann, W. and Bettzieche, V. and Roesler, F. and Butenweg, Christoph and K{\"o}nke, C. and Meskouris, Konstantin}, title = {Baudynamische Untersuchung von Talsperren des Ruhrverbandes}, series = {Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam = Assessment of the seismic safety of dams in Germany / organisiert von der Deutschen Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik. K. Meskouris ... (Hrsg.) (DGEB-Publikation ; Nr. 12)}, booktitle = {Neubewertung der Erdbebensicherheit von Talsperren in Deutschland : DGEB-Workshop, 28. November 2003 in Potsdam = Assessment of the seismic safety of dams in Germany / organisiert von der Deutschen Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik. K. Meskouris ... (Hrsg.) (DGEB-Publikation ; Nr. 12)}, publisher = {DGEB}, address = {Aachen}, isbn = {3-930108-08-9}, pages = {37 -- 48}, year = {2005}, language = {de} } @incollection{KuhlmannButenwegMeskourisetal.2012, author = {Kuhlmann, Wolfram and Butenweg, Christoph and Meskouris, Konstantin and Kempen, Thomas}, title = {Simulation des Tragverhaltens des Aachener Doms im Erdbebenfall}, series = {Die karolingische Pfalzkapelle in Aachen : Material, Bautechnik, Restaurierung. (Arbeitshefte der rheinischen Denkmalpflege ; 78)}, booktitle = {Die karolingische Pfalzkapelle in Aachen : Material, Bautechnik, Restaurierung. (Arbeitshefte der rheinischen Denkmalpflege ; 78)}, publisher = {Wernersche Verlags-Gesellschaft}, address = {Worms}, isbn = {978-3-88462-325-1}, pages = {237 -- 248}, year = {2012}, language = {de} } @incollection{KurbelPietsch1989, author = {Kurbel, Karl and Pietsch, Wolfram}, title = {Projektmanagementebenen bei evolution{\"a}rer Softwareentwicklung}, series = {Interaktive betriebswirtschaftliche Informations- und Steuerungssysteme}, booktitle = {Interaktive betriebswirtschaftliche Informations- und Steuerungssysteme}, editor = {Kurbel, Karl and Mertens, Peter and Scheer, August W.}, publisher = {De Gruyter}, address = {Berlin}, isbn = {3-11-012100-X}, doi = {10.1515/9783110847055-013}, pages = {261 -- 285}, year = {1989}, language = {de} } @incollection{Kurz2008, author = {Kurz, Melanie}, title = {Modell}, series = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design}, booktitle = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design}, editor = {Erlhoff, Michael}, publisher = {Birkh{\"a}user}, address = {Basel}, isbn = {978-3-7643-7738-0}, pages = {276 -- 277}, year = {2008}, language = {de} } @incollection{Kurz2008, author = {Kurz, Melanie}, title = {Skizze}, series = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design}, booktitle = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design}, editor = {Erlhoff, Michael}, publisher = {Birkh{\"a}user}, address = {Basel}, isbn = {978-3-7643-7738-0}, pages = {367}, year = {2008}, language = {de} } @incollection{Kurz2008, author = {Kurz, Melanie}, title = {Styling}, series = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design}, booktitle = {W{\"o}rterbuch Design : begriffliche Perspektiven des Design}, editor = {Erlhoff, Michael}, publisher = {Birkh{\"a}user}, address = {Basel}, isbn = {978-3-7643-7738-0}, pages = {386 -- 387}, year = {2008}, language = {de} } @incollection{Kurz2009, author = {Kurz, Melanie}, title = {GRO Design : die Verkehrsstudie}, series = {The making of design : vom Modell zum fertigen Produkt}, booktitle = {The making of design : vom Modell zum fertigen Produkt}, editor = {Tertiege, Gerrit}, publisher = {Birkh{\"a}user Verlag}, isbn = {978-3-03-460088-0}, pages = {130 -- 133}, year = {2009}, language = {de} } @incollection{Kurz2012, author = {Kurz, Melanie}, title = {Prizing \& Pricing : Design zwischen Rang und Regal}, series = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien}, booktitle = {Vielen Dank f{\"u}r Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien}, publisher = {Transcript Verlag}, address = {Bielefeld}, isbn = {978-3-8376-2170-9}, doi = {10.1515/transcript.9783839421703.26}, pages = {26 -- 39}, year = {2012}, language = {de} } @incollection{Kurz2022, author = {Kurz, Melanie}, title = {Vom Werkbundstreit bis zur Papierformatnormung - welche Rolle der Chemie-Nobelpreistr{\"a}ger Friedrich Wilhelm Ostwald bei Typisierungsbestrebungen im Design spielt}, series = {Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts}, volume = {2022}, booktitle = {Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-380-2}, pages = {6 -- 17}, year = {2022}, language = {de} } @incollection{Kurz2021, author = {Kurz, Melanie}, title = {Zur Multikausalit{\"a}t von Designentscheidungen - eine Beispielsammlung}, series = {Designentscheidungen: {\"u}ber Begr{\"u}ndungen im Entwurfsprozess}, booktitle = {Designentscheidungen: {\"u}ber Begr{\"u}ndungen im Entwurfsprozess}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-353-6}, pages = {22 -- 43}, year = {2021}, language = {de} } @incollection{Kurz2019, author = {Kurz, Melanie}, title = {Betrifft Design : von historischen Zukunftsperspektiven zu gegenw{\"a}rtigen Vergangenheitssehns{\"u}chten}, series = {Positionen des Neuen : Zukunft im Design}, booktitle = {Positionen des Neuen : Zukunft im Design}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-301-7}, pages = {136 -- 144}, year = {2019}, language = {de} } @incollection{Kurz2023, author = {Kurz, Melanie}, title = {Waffen und milit{\"a}rische Ausr{\"u}stung in Systemspielzeugwelten}, series = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer}, booktitle = {Design f{\"u}r Spiel, Spaß, Spannung: Gestaltung von Artefakten zum spielerischen Handeln / herausgegeben von Melanie Kurz und Thilo Schwer}, publisher = {avedition}, address = {Stuttgart}, isbn = {978-3-89986-396-3}, pages = {104 -- 121}, year = {2023}, language = {de} } @incollection{KurzZebner2011, author = {Kurz, Melanie and Zebner, Frank}, title = {Zum Verh{\"a}ltnis von Design und Technik}, series = {Design, Anfang des 21 Jh. : Diskurse und Perspektiven}, booktitle = {Design, Anfang des 21 Jh. : Diskurse und Perspektiven}, editor = {Eisele, Petra and B{\"u}rdek, Bernhard E.}, publisher = {avedition}, address = {Ludwigsburg}, isbn = {978-3-89986-150-1}, pages = {174 -- 185}, year = {2011}, language = {de} } @incollection{KuemmellHillgaertner2015, author = {K{\"u}mmell, Steffen and Hillg{\"a}rtner, Michael}, title = {Inductive charging comfortable and nonvisible charging stations for urbanised areas}, series = {E-Mobility in Europe : trends and good practice}, booktitle = {E-Mobility in Europe : trends and good practice}, publisher = {Springer}, address = {Cham [u.a.]}, isbn = {978-3-319-13193-1}, doi = {10.1007/978-3-319-13194-8_16}, pages = {297 -- 309}, year = {2015}, abstract = {For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today's state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles' needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future's inductive charging infrastructures, several field tests had been carried out and are planned in near future.}, language = {en} } @incollection{Laack2012, author = {Laack, Walter van}, title = {Elektro- und Ultraschalltherapie}, series = {Leitfaden Naturheilverfahren : f{\"u}r die {\"a}rztliche Praxis}, booktitle = {Leitfaden Naturheilverfahren : f{\"u}r die {\"a}rztliche Praxis}, editor = {Beer, Andr{\´e}-Michael and Adler, Martin}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-3-437-56103-0}, doi = {10.1016/B978-3-437-56103-0.10013-5}, pages = {285 -- 299}, year = {2012}, language = {de} } @incollection{Laack2014, author = {Laack, Walter van}, title = {Gefahren heutiger neurologischer Schlussfolgerungen f{\"u}r ethische Verantwortung}, series = {Ethik und Moral in Staat, Wirtschaft und Gesellschaft : 5. Rotary-Tag, 14.-15.2.2014, Kleve}, booktitle = {Ethik und Moral in Staat, Wirtschaft und Gesellschaft : 5. Rotary-Tag, 14.-15.2.2014, Kleve}, publisher = {Edition Virgines}, address = {Lingen}, organization = {Rotary-Tag <5, 2014, Kleve>}, isbn = {978-3-944011-21-9}, pages = {98 -- 114}, year = {2014}, language = {de} } @incollection{Laack2014, author = {Laack, Walter van}, title = {Zu neuen wissenschaftlichen Erkenntnissen zur Vereinbarkeit von Vernunft und Glaube}, series = {Ethik und Moral in Staat, Wirtschaft und Gesellschaft : 5. Rotary-Tag, 14.-15.2.2014, Kleve}, booktitle = {Ethik und Moral in Staat, Wirtschaft und Gesellschaft : 5. Rotary-Tag, 14.-15.2.2014, Kleve}, publisher = {Edition Virgines}, address = {Lingen}, organization = {Rotary-Tag <5, 2014, Kleve>}, isbn = {978-3-944011-21-9}, pages = {152 -- 162}, year = {2014}, language = {de} } @incollection{Laack2020, author = {Laack, Walter van}, title = {Twee Kanten van {\´e}{\´e}n Medaille}, series = {Het Geheim van Elysion : 45 Jaar Studies naar Nabij-de-Dood-Ervaringen over Bewustzijn in Liefde zonder Waarheen}, booktitle = {Het Geheim van Elysion : 45 Jaar Studies naar Nabij-de-Dood-Ervaringen over Bewustzijn in Liefde zonder Waarheen}, publisher = {Van Warven}, address = {Kampen}, isbn = {978-94-93175-44-0}, pages = {97 -- 105}, year = {2020}, language = {nl} } @incollection{Laack2023, author = {Laack, Walter van}, title = {Nahtoderfahrungen, Sterben und Tod aus der Perspektive von Medizin, Naturwissenschaften und Philosophie}, series = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven}, booktitle = {Thanatologie im deutschsprachigen Raum - Interdisziplin{\"a}re Perspektiven}, editor = {Ortmanns, Bruno and Brauers, Angelika}, publisher = {Rediroma-Verlag}, isbn = {978-3-98527-661-5}, pages = {129 -- 139}, year = {2023}, language = {de} } @incollection{LanzlSeidovaDuehringetal.2009, author = {Lanzl, I. and Seidova, S.-F. and D{\"u}hring, C. von and Kotliar, Konstantin}, title = {Befunde der dynamischen Gef{\"a}ßanalyse am Auge bei Gesunden und Glaukom-Patienten mit praxisrelevanter Bedeutung}, series = {Mikrozirkulation beim Glaukom}, booktitle = {Mikrozirkulation beim Glaukom}, editor = {Erb, Carl}, publisher = {Elsevier}, address = {Amsterdam}, pages = {33 -- 39}, year = {2009}, language = {de} } @incollection{LehnertzBialonskiHorstmannetal.2010, author = {Lehnertz, Klaus and Bialonski, Stephan and Horstmann, Marie-Therese and Krug, Dieter and Rothkegel, Alexander and Staniek, Matth{\"a}us and Wagner, Tobias}, title = {Epilepsy}, series = {Reviews of Nonlinear Dynamics and Complexity, Volume 2}, booktitle = {Reviews of Nonlinear Dynamics and Complexity, Volume 2}, publisher = {Wiley-VCH}, isbn = {9783527628001}, doi = {10.1002/9783527628001.ch5}, pages = {159 -- 200}, year = {2010}, language = {en} } @incollection{LeichtScholtenSteuerDankert2020, author = {Leicht-Scholten, Carmen and Steuer-Dankert, Linda}, title = {Educating engineers for socially responsible solutions through design thinking}, series = {Design thinking in higher education: interdisciplinary encounters}, booktitle = {Design thinking in higher education: interdisciplinary encounters}, publisher = {Springer}, address = {Singapore}, isbn = {978-981-15-5780-4}, doi = {10.1007/978-981-15-5780-4}, pages = {229 -- 246}, year = {2020}, abstract = {There is a broad international discussion about rethinking engineering education in order to educate engineers to cope with future challenges, and particularly the sustainable development goals. In this context, there is a consensus about the need to shift from a mostly technical paradigm to a more holistic problem-based approach, which can address the social embeddedness of technology in society. Among the strategies suggested to address this social embeddedness, design thinking has been proposed as an essential complement to engineering precisely for this purpose. This chapter describes the requirements for integrating the design thinking approach in engineering education. We exemplify the requirements and challenges by presenting our approach based on our course experiences at RWTH Aachen University. The chapter first describes the development of our approach of integrating design thinking in engineering curricula, how we combine it with the Sustainable Development Goals (SDG) as well as the role of sustainability and social responsibility in engineering. Secondly, we present the course "Expanding Engineering Limits: Culture, Diversity, and Gender" at RWTH Aachen University. We describe the necessity to theoretically embed the method in social and cultural context, giving students the opportunity to reflect on cultural, national, or individual "engineering limits," and to be able to overcome them using design thinking as a next step for collaborative project work. The paper will suggest that the successful implementation of design thinking as a method in engineering education needs to be framed and contextualized within Science and Technology Studies (STS).}, language = {en} } @incollection{LeiseAltherr2021, author = {Leise, Philipp and Altherr, Lena}, title = {Experimental evaluation of resilience metrics in a fluid system}, series = {Mastering Uncertainty in Mechanical Engineering}, booktitle = {Mastering Uncertainty in Mechanical Engineering}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-78356-3}, pages = {442 -- 447}, year = {2021}, language = {en} } @incollection{LeiseAltherrPelz2018, author = {Leise, Philipp and Altherr, Lena and Pelz, Peter F.}, title = {Energy-Efficient design of a water supply system for skyscrapers by mixed-integer nonlinear programming}, series = {Operations Research Proceedings 2017}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-89919-0}, doi = {10.1007/978-3-319-89920-6_63}, year = {2018}, abstract = {The energy-efficiency of technical systems can be improved by a systematic design approach. Technical Operations Research (TOR) employs methods known from Operations Research to find a global optimal layout and operation strategy of technical systems. We show the practical usage of this approach by the systematic design of a decentralized water supply system for skyscrapers. All possible network options and operation strategies are modeled by a Mixed-Integer Nonlinear Program. We present the optimal system found by our approach and highlight the energy savings compared to a conventional system design.}, language = {en} } @incollection{LeiseAltherrSimonetal.2019, author = {Leise, Philipp and Altherr, Lena and Simon, Nicolai and Pelz, Peter F.}, title = {Finding global-optimal gearbox designs for battery electric vehicles}, series = {Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019}, booktitle = {Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-21802-7}, doi = {10.1007/978-3-030-21803-4_91}, pages = {916 -- 925}, year = {2019}, abstract = {In order to maximize the possible travel distance of battery electric vehicles with one battery charge, it is mandatory to adjust all components of the powertrain carefully to each other. While current vehicle designs mostly simplify the powertrain rigorously and use an electric motor in combination with a gearbox with only one fixed transmission ratio, the use of multi-gear systems has great potential. First, a multi-speed system is able to improve the overall energy efficiency. Secondly, it is able to reduce the maximum momentum and therefore to reduce the maximum current provided by the traction battery, which results in a longer battery lifetime. In this paper, we present a systematic way to generate multi-gear gearbox designs that—combined with a certain electric motor—lead to the most efficient fulfillment of predefined load scenarios and are at the same time robust to uncertainties in the load. Therefore, we model the electric motor and the gearbox within a Mixed-Integer Nonlinear Program, and optimize the efficiency of the mechanical parts of the powertrain. By combining this mathematical optimization program with an unsupervised machine learning algorithm, we are able to derive global-optimal gearbox designs for practically relevant momentum and speed requirements.}, language = {en} } @incollection{Lemke2016, author = {Lemke, J{\"o}rg}, title = {Unfallverh{\"u}tung, Arbeits- und Gesundheitsschutz}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_15}, pages = {1599 -- 1638}, year = {2016}, abstract = {Neben dem durch Unf{\"a}lle und Krankheiten entstehenden menschlichen Leids und der daraus resultierenden moralischen Verpflichtung, sich und seine Mitmenschen vor Schaden zu bewahren, ist der Arbeits- und Gesundheitsschutz auch ein Gebot wirtschaftlichen Handelns, da Arbeitsunf{\"a}lle und Berufskrankheiten Ausfallzeiten und Kosten verursachen. So geh{\"o}ren Arbeits- und Gesundheitsschutz zu den wichtigen Aufgaben eines Unternehmens.}, language = {de} } @incollection{Lemke2019, author = {Lemke, J{\"o}rg}, title = {Arbeitssicherheit}, series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-23127-9}, doi = {10.1007/978-3-658-23127-9_12}, pages = {335 -- 344}, year = {2019}, language = {de} } @incollection{LinckeHaertschHoffmannetal.1997, author = {Lincke, D.-M. and Haertsch, P. and Hoffmann, C. P. and Lindemann, Markus}, title = {Electronic Commerce Plattformen f{\"u}r den Werkzeugmaschinenbau}, series = {Internet im Industrieg{\"u}termarketing - Status quo und Entwicklungsperspektiven am Beispiel der Schweizer Werkzeugmaschinen-Industrie / Johannes Dickel ... (Hrsg.) Thexis-Fachbericht f{\"u}r Marketing. 97,4}, booktitle = {Internet im Industrieg{\"u}termarketing - Status quo und Entwicklungsperspektiven am Beispiel der Schweizer Werkzeugmaschinen-Industrie / Johannes Dickel ... (Hrsg.) Thexis-Fachbericht f{\"u}r Marketing. 97,4}, publisher = {Thexis}, address = {St. Gallen}, isbn = {3-908545-38-2}, pages = {60 -- 85}, year = {1997}, language = {de} } @incollection{Lind2014, author = {Lind, Thorsten Patric}, title = {Insolvenzverwalter, Organe der Gl{\"a}ubiger : \S\S 56-62, 66-72, 74-79}, series = {Fachanwaltskommentar Insolvenzrecht / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 2. Aufl.}, booktitle = {Fachanwaltskommentar Insolvenzrecht / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 2. Aufl.}, publisher = {Luchterhand}, address = {K{\"o}ln}, isbn = {978-3-472-08559-1}, pages = {649 - 703; 728 - 745; 748 - 762}, year = {2014}, language = {de} } @incollection{Lind2014, author = {Lind, Thorsten Patric}, title = {Verwaltung und Verwertung der Insolvenzmasse : \S\S 148 - 164}, series = {Fachanwaltskommentar Insolvenzrecht / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 2. Aufl.}, booktitle = {Fachanwaltskommentar Insolvenzrecht / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 2. Aufl.}, publisher = {Luchterhand}, address = {K{\"o}ln}, isbn = {978-3-472-08559-1}, pages = {1317 -- 1356}, year = {2014}, language = {de} } @incollection{Lind2012, author = {Lind, Thorsten Patric}, title = {Wirkungen der Er{\"o}ffnung des Insolvenzverfahrens : \S\S 129, 132, 133, 144, 145}, series = {Bankenkommentar zum Insolvenzrecht. - 2. Aufl.}, booktitle = {Bankenkommentar zum Insolvenzrecht. - 2. Aufl.}, publisher = {Finanz Colloquium}, address = {Heidelberg}, isbn = {978-3-943170-03-0}, pages = {1145 -- 1585}, year = {2012}, language = {de} } @incollection{Lind2011, author = {Lind, Thorsten Patric}, title = {Wirkungen der Er{\"o}ffnung des Insolvenzverfahrens : \S\S 129, 132, 133, 144, 145}, series = {Bankenkommentar zum Insolvenzrecht}, booktitle = {Bankenkommentar zum Insolvenzrecht}, publisher = {Finanz Colloquium}, address = {Heidelberg}, isbn = {978-3-940976-55-0}, pages = {1145 -- 1585}, year = {2011}, language = {de} } @incollection{Lind2016, author = {Lind, Thorsten Patric}, title = {Wirkungen der Er{\"o}ffnung des Insolvenzverfahrens : \S\S 129, 132, 133, 144, 145}, series = {Bankenkommentar zum Insolvenzrecht. - 3. Auflage}, booktitle = {Bankenkommentar zum Insolvenzrecht. - 3. Auflage}, publisher = {Finanz Colloquium}, address = {Heidelberg}, isbn = {978-3-95725-016-2}, pages = {1277 -- 1767}, year = {2016}, language = {de} } @incollection{Lind2017, author = {Lind, Thorsten Patric}, title = {Er{\"o}ffnung des Insolvenzverfahrens. Erfaßtes Verm{\"o}gen und Verfahrensbeteiligte. Insolvenzverwalter, Organe der Gl{\"a}ubiger : \S\S 56-62, 66-72, 74-79}, series = {Insolvenzrecht : Kommentar / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 3. Auflage}, booktitle = {Insolvenzrecht : Kommentar / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 3. Auflage}, publisher = {Luchterhand}, address = {K{\"o}ln}, isbn = {978-3-472-08669-7}, pages = {690 - 752; 776 - 797; 802 - 818}, year = {2017}, language = {de} } @incollection{Lind2017, author = {Lind, Thorsten Patric}, title = {Verwaltung und Verwertung der Insolvenzmasse. Sicherung der Insolvenzmasse, Entscheidung {\"u}ber die Verwertung : \S\S 148-164}, series = {Insolvenzrecht : Kommentar / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 3. Auflage}, booktitle = {Insolvenzrecht : Kommentar / hrsg. von Martin Ahrens; Markus Gehrlein; Andreas Ringstmeier . - 3. Auflage}, publisher = {Luchterhand}, address = {K{\"o}ln}, isbn = {978-3-472-08669-7}, pages = {1437 -- 1479}, year = {2017}, language = {de} } @incollection{Lindemann1998, author = {Lindemann, Markus}, title = {Unternehmerische Netzwerke und elektronische M{\"a}rkte - Blicke in die Zukunft}, series = {Produktionsmanagement und Informationslogistik - aktuelle Entwicklungen, Trends und Perspektiven. (Im focus)}, booktitle = {Produktionsmanagement und Informationslogistik - aktuelle Entwicklungen, Trends und Perspektiven. (Im focus)}, publisher = {Orell F{\"u}ssli}, address = {Z{\"u}rich}, year = {1998}, language = {de} } @incollection{LindemannKlein1997, author = {Lindemann, Markus and Klein, Stefan}, title = {Die Nutzung von Internet-Diensten im Rahmen des Elektronischen Datenaustauschs - Architekturvarianten und ein Anwendungsszenario}, series = {Wirtschaftsinformatik '97 - Internationale Gesch{\"a}ftst{\"a}tigkeit auf der Basis flexibler Organisationsstrukturen und leistungsf{\"a}higer Informationssysteme / Hermann Krallmann (Hrsg.)}, booktitle = {Wirtschaftsinformatik '97 - Internationale Gesch{\"a}ftst{\"a}tigkeit auf der Basis flexibler Organisationsstrukturen und leistungsf{\"a}higer Informationssysteme / Hermann Krallmann (Hrsg.)}, publisher = {Physica-Verlag}, address = {Heidelberg}, isbn = {3-7908-0999-3}, pages = {513 -- 531}, year = {1997}, language = {de} } @incollection{LingensVollmann2013, author = {Lingens, Hans and Vollmann, Andreas}, title = {F{\"u}getechnik an der FH Aachen - Aus- und Weiterbildung mit Praxisbezug}, series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, publisher = {Apprimus Verlag}, address = {Aachen}, isbn = {978-3-86359-136-6}, pages = {123 -- 127}, year = {2013}, language = {de} } @incollection{LintzelBorchert2009, author = {Lintzel, P. and Borchert, J{\"o}rg}, title = {Risiken des Handels}, series = {Energiehandel in Europa}, booktitle = {Energiehandel in Europa}, editor = {Zenke, Ines}, edition = {2. Aufl.}, publisher = {Beck}, address = {M{\"u}nchen}, isbn = {978-3-406-58373-5}, pages = {239 -- 247}, year = {2009}, language = {de} } @incollection{Lohse2009, author = {Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-8348-0684-0 ; 978-3-8348-9997-2}, doi = {10.1007/978-3-8348-9997-2_10}, pages = {235 -- 274}, year = {2009}, language = {de} } @incollection{Lohse2005, author = {Lohse, Wolfram}, title = {Stahlbau}, series = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, booktitle = {Wendehorst Beispiele aus der Baupraxis. - 1. Aufl.}, publisher = {Teubner}, address = {Stuttgart}, isbn = {3-519-00489-5 ; 978-3-519-00489-9}, pages = {99 -- 136}, year = {2005}, language = {de} } @incollection{LohseStroetmann2012, author = {Lohse, Wolfram and Stroetmann, Richard}, title = {Stahlbau}, series = {Wendehorst Bautechnische Zahlentafeln}, booktitle = {Wendehorst Bautechnische Zahlentafeln}, editor = {Vismann, Ulrich}, edition = {34}, publisher = {Vieweg + Teubner}, address = {Wiesbaden}, isbn = {978-3-8348-0960-5}, doi = {10.1007/978-3-8348-8613-2_13}, pages = {777 -- 1019}, year = {2012}, language = {de} } @incollection{LuczakWolfMuehlfelder2001, author = {Luczak, Holger and Wolf, Martin and M{\"u}hlfelder, M.}, title = {Arbeitswissenschaft}, series = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen}, booktitle = {CSCW-Kompendium : Lehr- und Handbuch zum computerunterst{\"u}tzten kooperativen Arbeiten ; mit 9 Tabellen}, editor = {Schwabe, Gerhard}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-540-67552-5}, doi = {10.1007/978-3-642-56848-0_2}, pages = {7 -- 14}, year = {2001}, abstract = {Unter Arbeit wird das T{\"a}tigsein des Menschen verstanden, bei dem dieser mit anderen Menschen und (technischen) Hilfsmitteln in Interaktion tritt, um unter wirtschaftlichen Zielsetzungen G{\"u}ter und Dienstleistungen zu erstellen (Luczak, 1998a). Arbeit dient direkt oder indirekt der Erhaltung der eigenen Existenz und der Existenz der Gesellschaft. Arbeit ist deshalb eine besondere Form des T{\"a}tigseins neben anderen wie Spiel, Sport, Lemen usw.}, language = {de} } @incollection{LuczakWolfSchlicketal.1999, author = {Luczak, Holger and Wolf, Martin and Schlick, Christopher and Springer, J. and Foltz, Christian}, title = {Personenorientierte Arbeitsprozesse und Kommunikationsforrnen}, series = {Integration von Entwicklungssystemen in Ingenieuranwendungen : substantielle Verbesserung der Entwicklungsprozesse}, booktitle = {Integration von Entwicklungssystemen in Ingenieuranwendungen : substantielle Verbesserung der Entwicklungsprozesse}, editor = {Nagl, Walter}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-63920-9}, pages = {403 -- 422}, year = {1999}, language = {de} } @incollection{MacdonaldMcGrathAppourchauxetal.2014, author = {Macdonald, Malcolm and McGrath, C. and Appourchaux, T. and Dachwald, Bernd and Finsterle, W. and Gizon, L. and Liewer, P. C. and McInnes, Colin R. and Mengali, G. and Seboldt, W. and Sekii, T. and Solanki, S. K. and Velli, M. and Wimmer-Schweingruber, R. F. and Spietz, Peter and Reinhard, Ruedeger}, title = {Gossamer roadmap technology reference study for a solar polar mission}, series = {Advances in solar sailing}, booktitle = {Advances in solar sailing}, editor = {Macdonald, Malcolm}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-642-34906-5}, doi = {10.1007/978-3-642-34907-2_17}, pages = {243 -- 257}, year = {2014}, abstract = {A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100-125 m to deliver a 'sufficient value' minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.}, language = {en} } @incollection{Mandelartz2009, author = {Mandelartz, Johannes}, title = {VDI-Richtlinien - mit Technischen Regeln Wirtschaftlichkeit erh{\"o}hen und Standards setzen}, series = {Betriebliche Instandhaltung}, booktitle = {Betriebliche Instandhaltung}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-642-00502-2}, doi = {10.1007/978-3-642-00502-2_26}, pages = {311 -- 317}, year = {2009}, abstract = {Der Verein Deutscher Ingenieure e.V. (VDI) ist ein gemeinn{\"u}tziger, wirtschaftlich und politisch unabh{\"a}ngiger, technisch-wissenschaftlicher Verein von Ingenieuren und Naturwissenschaftlern. Mit {\"u}ber 137 000 pers{\"o}nlich zugeordneten Mitgliedern ist er eine der gr{\"o}ßten Ingenieur-Vereinigungen Europas und gilt in Deutschland als f{\"u}hrender Sprecher der Technik und der Ingenieure. 1856 gegr{\"u}ndet, hat er viele f{\"u}r die Technik wesentliche Entwicklungen in Gang gesetzt, so im Bereich der technischen {\"U}berwachung, der technischen Regelsetzung und Normung, der Arbeitsstudien, im gewerblichen Rechtsschutz und im Patentwesen. Seit seiner Gr{\"u}ndung sieht es der VDI als seine Aufgabe, "das Zusammenwirken aller geistiger Kr{\"a}fte der Technik im Bewusstsein ethischer Verantwortung zu f{\"o}rdern" und die Lebensm{\"o}glichkeiten aller Menschen durch Entwicklung und sinnvoller Anwendung technischer Mittel zu verbessern.}, language = {de} } @incollection{Mandelartz2007, author = {Mandelartz, Johannes}, title = {VDI-Richtlinien und Standards zu RFID}, series = {RFID in der Instandhaltung. (Forum Vision Instandhaltung)}, booktitle = {RFID in der Instandhaltung. (Forum Vision Instandhaltung)}, publisher = {Verl. Praxiswissen}, address = {Dortmund}, isbn = {978-3-89957-061-8}, pages = {169 -- 179}, year = {2007}, language = {de} } @incollection{MandelartzTeschersSchumacher2003, author = {Mandelartz, Johannes and Teschers, Reimar and Schumacher, Thomas}, title = {Aluminium-Einsatz im Verkehrssektor}, series = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)}, booktitle = {Resource-orientated analysis of metallic raw materials : findings of CRC 525 for aluminium. (Reihe Materie und Material ; 17.)}, publisher = {Forschungszentrum J{\"u}lich}, address = {J{\"u}lich}, isbn = {3-89336-342-4}, pages = {7.1 -- 7.11}, year = {2003}, language = {de} } @incollection{MansurovJandosovChenchiketal.2020, author = {Mansurov, Zulkhair A. and Jandosov, Jakpar and Chenchik, D. and Azat, Seitkhan and Savitskaya, Irina S. and Kistaubaeva, Aida and Akimbekov, Nuraly and Digel, Ilya and Zhubanova, Azhar Achmet}, title = {Biocomposite Materials Based on Carbonized Rice Husk in Biomedicine and Environmental Applications}, series = {Carbon Nanomaterials in Biomedicine and the Environment}, booktitle = {Carbon Nanomaterials in Biomedicine and the Environment}, publisher = {Jenny Stanford Publishing Pte. Ltd.}, address = {Singapore}, isbn = {978-981-4800-27-3}, doi = {10.1201/9780429428647-2}, pages = {3 -- 32}, year = {2020}, abstract = {This chapter describes the prospects for biomedical and environmental engineering applications of heterogeneous materials based on nanostructured carbonized rice husk. Efforts in engineering enzymology are focused on the following directions: development and optimization of immobilization methods leading to novel biotechnological and biomedical applications; construction of biocomposite materials based on individual enzymes, multi-enzyme complexes and whole cells, targeted on realization of specific industrial processes. Molecular biological and biochemical studies on cell adhesion focus predominantly on identification, isolation and structural analysis of attachment-responsible biological molecules and their genetic determinants. The chapter provides a short overview of applications of the biocomposite materials based of nanostructured carbonized adsorbents. It emphasizes that further studies and better understanding of the interactions between CNS and microbial cells are necessary. The future use of living cells as biocatalysts, especially in the environmental field, needs more systematic investigations of the microbial adsorption phenomenon.}, language = {en} } @incollection{Martin2016, author = {Martin, Joachim}, title = {Betriebsorganisation}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_12}, pages = {1297 -- 1389}, year = {2016}, abstract = {Das Kapitel behandelt, ausgehend von Begriffen und Aufgaben der Betriebsorganisation, die Aufbau- und Ablauforganisation der Bauunternehmung sowie die Gestaltung einer Projekt-organisation. Es folgt eine Darstellung der Managementsysteme f{\"u}r Qualit{\"a}t, Umwelt und Arbeitsschutz, die sich zunehmend als sog. integrierte Managementsysteme (IMS) auch in Bauunternehmen etablieren. Grundlagen des Personalmanagements und des betrieblichen Rechnungswesens, die f{\"u}r eine(n) Baubetriebler(in) relevant sein k{\"o}nnen, erg{\"a}nzen das Kap. Betriebsorganisation. Den Abschluss bilden Hinweise zum Berichtswesen der Baustelle.}, language = {de} } @incollection{Martin2019, author = {Martin, Joachim}, title = {Bemessung von Baukonstruktionen}, series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-23127-9}, doi = {10.1007/978-3-658-23127-9_1}, pages = {1 -- 11}, year = {2019}, language = {de} } @incollection{Martin2019, author = {Martin, Joachim}, title = {Betriebsorganisation}, series = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, booktitle = {{\"U}bungsaufgaben und Berechnungen f{\"u}r den Baubetrieb}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-23127-9}, doi = {10.1007/978-3-658-23127-9_10}, pages = {255 -- 272}, year = {2019}, language = {de} } @incollection{MartinMartin2016, author = {Martin, Joachim and Martin, Angelika}, title = {Gr{\"o}ßen, Formeln, Bemessung}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, edition = {9., {\"u}berarb. und aktual. Aufl.}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-02838-1 (Online)}, doi = {10.1007/978-3-658-02838-1_1}, pages = {1 -- 61}, year = {2016}, abstract = {Das Kapitel 1 vermittelt eine {\"U}bersicht f{\"u}r den schnellen Gebrauch von Gr{\"o}ßen, Einheiten und Zeichen. Es folgt die Darstellung wichtiger Grundlagen der Mathematik, Lastannahmen und einfacher statischer Systeme. Schließlich werden Hinweise zu charakteristischen Festigkeiten und Tragf{\"a}higkeitsnachweisen f{\"u}r Berechnungen im Mauerwerk, Holz- und Stahlbau sowie Stahlbetonbau gegeben. F{\"u}r eine weitere Vertiefung des Themas empfiehlt sich der Wendehorst Bautechnische Zahlentafel}, language = {de} } @incollection{Matcha2010, author = {Matcha, Heike}, title = {Regelbasierte Planung - Parametrik}, series = {Digitale Prozesse: Planung, Gestaltung, Fertigung}, booktitle = {Digitale Prozesse: Planung, Gestaltung, Fertigung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Ed. Detail}, address = {M{\"u}nchen}, isbn = {978-3-920034-35-5}, pages = {24 -- 24}, year = {2010}, language = {de} } @incollection{Matcha2010, author = {Matcha, Heike}, title = {Regelbasierte Planung - Parametrik}, series = {Digitale Prozesse : Planung, Gestaltung, Fertigung}, booktitle = {Digitale Prozesse : Planung, Gestaltung, Fertigung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Detail}, address = {M{\"u}nchen}, isbn = {978-3-95553-022-8}, doi = {10.11129/detail.9783955530228}, pages = {24 -- 24}, year = {2010}, language = {de} } @incollection{Matcha2007, author = {Matcha, Heike}, title = {Vom Industriellen Bauen zu parametrischen Planungsprozessen}, series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Technische Universit{\"a}t Darmstadt}, address = {Darmstadt}, pages = {12 -- 13}, year = {2007}, language = {de} } @incollection{Matcha2007, author = {Matcha, Heike}, title = {Parametrischer Geb{\"a}udeentwurf}, series = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, booktitle = {Parametrik, Strategie, Produktion: Von der digitalen Planung zur technischen Umsetzung}, editor = {Hauschild, Moritz and Karzel, R{\"u}diger}, publisher = {Technische Universit{\"a}t Darmstadt}, address = {Darmstadt}, pages = {14 -- 15}, year = {2007}, language = {de} } @incollection{MatchaBarczik2011, author = {Matcha, Heike and Barczik, G{\"u}nter}, title = {Mass Diversity: Individualized housing via parametric typology}, series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism}, booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism}, editor = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg}, publisher = {Edition Axel Menges}, address = {Fellbach}, isbn = {978-3-936681-47-5}, pages = {354 -- 358}, year = {2011}, language = {en} } @incollection{MatchaBarczikAgkathidis2009, author = {Matcha, Heike and Barczik, G{\"u}nter and Agkathidis, Asterios}, title = {Produktive Prozesse: Mehr Vielfalt, Komplexit{\"a}t und Kreativit{\"a}t im Entwerfen mittels parametrisierter generativer Algorithmen}, series = {Modulare Strukturen in Entwurf und Architektur}, booktitle = {Modulare Strukturen in Entwurf und Architektur}, publisher = {BIS-Publishers}, address = {Amsterdam}, isbn = {978-90-6369-208-7}, pages = {126 -- 130}, year = {2009}, language = {de} } @incollection{MatchaKarzelPahl2013, author = {Matcha, Heike and Karzel, R{\"u}diger and Pahl, Katja-Annika}, title = {Lehre als Praxis als Forschung: 1:1 Entwicklung von Messest{\"a}nden unter Einsatz parametrisierter Software und computergesteuerter Herstellung}, series = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung}, booktitle = {ECHT?! Zum Bezug von Praxis und Lehre in der Architekturausbildung}, publisher = {TUDpress - Verlag der Wissenschaften}, address = {Dresden}, isbn = {978-3-94433111-9}, pages = {95 -- 108}, year = {2013}, language = {de} } @incollection{Mayer2013, author = {Mayer, Claudia}, title = {Innovation und Kommunikation}, series = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, booktitle = {Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsf{\"a}higkeit steigert : Festschrift f{\"u}r Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)}, publisher = {Apprimus Verlag}, address = {Aachen}, isbn = {978-3-86359-136-6}, pages = {145 -- 149}, year = {2013}, language = {de} } @incollection{McInnesBothmerDachwaldetal.2014, author = {McInnes, Colin R. and Bothmer, Volker and Dachwald, Bernd and Geppert, Ulrich R. M. E. and Heiligers, Jeannette and Hilgers, Alan and Johnson, Les and Macdonald, Malcolm and Reinhard, Ruedeger and Seboldt, Wolfgang and Spietz, Peter}, title = {Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission}, series = {Advances in solar sailing}, booktitle = {Advances in solar sailing}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)}, pages = {227 -- 242}, year = {2014}, abstract = {A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.}, language = {en} } @incollection{MedlinBarkerBaumannetal.1994, author = {Medlin, L. K. and Barker, G. L. A. and Baumann, Marcus and Hayes, P. K.}, title = {Molecular biology and systematics}, series = {The Haptophyte Algae (Special volume / Systematics Association : 51)}, booktitle = {The Haptophyte Algae (Special volume / Systematics Association : 51)}, publisher = {Clarendon Press}, address = {Oxford}, isbn = {0-19-857772-9}, pages = {393 -- 411}, year = {1994}, language = {en} } @incollection{Meliss1990, author = {Meliß, Michael}, title = {Trends und Schwerpunkte bei der Entwicklung regenerativer Energietr{\"a}ger}, series = {Technische Perspektiven und gesellschaftliche Entwicklungen : Trends und Schwerpunkte der Forschung in der Bundesrepublik Deutschland / Ulrich Widmaier; Thomas K{\"o}nig (Hrsg.). - (Studien zur gesellschaftlichen Entwicklung ; 1)}, booktitle = {Technische Perspektiven und gesellschaftliche Entwicklungen : Trends und Schwerpunkte der Forschung in der Bundesrepublik Deutschland / Ulrich Widmaier; Thomas K{\"o}nig (Hrsg.). - (Studien zur gesellschaftlichen Entwicklung ; 1)}, publisher = {Nomos-Verl.-Ges.}, address = {Baden-Baden}, isbn = {3-7890-1891-0}, pages = {279 -- 306}, year = {1990}, language = {de} } @incollection{Meliss1998, author = {Meliß, Michael}, title = {Regenerative Energietr{\"a}ger}, series = {Lexikon der Bioethik / hrsg. im Auftr. der G{\"o}rres-Gesellschaft von Wilhelm Korff. Bd. 3}, booktitle = {Lexikon der Bioethik / hrsg. im Auftr. der G{\"o}rres-Gesellschaft von Wilhelm Korff. Bd. 3}, publisher = {G{\"u}tersloher Verlagshaus}, address = {G{\"u}tersloh}, pages = {168 -- 175}, year = {1998}, language = {de} } @incollection{Meliss1994, author = {Meliß, Michael}, title = {Regenerative Energiequellen}, series = {Energie - Technik - Umwelt : Festschrift : Herrn Professor Dr.-Ing. Hermann Unger zum 60. Geburtstag gewidmete Arbeiten / Ruhr-Universit{\"a}t Bochum, [Institut f{\"u}r Energietechnik], Lehrstuhl f{\"u}r Nukleare und Neue Energiesysteme. Hrsg.: U. Brockmeier}, booktitle = {Energie - Technik - Umwelt : Festschrift : Herrn Professor Dr.-Ing. Hermann Unger zum 60. Geburtstag gewidmete Arbeiten / Ruhr-Universit{\"a}t Bochum, [Institut f{\"u}r Energietechnik], Lehrstuhl f{\"u}r Nukleare und Neue Energiesysteme. Hrsg.: U. Brockmeier}, publisher = {Ruhr-Universit{\"a}t Bochum}, address = {Bochum}, pages = {287 -- 298}, year = {1994}, language = {de} } @incollection{MelissSpaete1997, author = {Meliß, Michael and Sp{\"a}te, Frank}, title = {Berechnung von Sonnenstand und -strahlung}, series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß}, booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-63218-2}, doi = {10.1007/978-3-642-60864-3_2}, pages = {5 -- 22}, year = {1997}, language = {de} } @incollection{MelissSpaete1997, author = {Meliß, Michael and Sp{\"a}te, Frank}, title = {Auslegung von solarthermischen Anlagen}, series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß}, booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-63218-2}, doi = {10.1007/978-3-642-60864-3_3}, pages = {23 -- 47}, year = {1997}, language = {de} } @incollection{MelznerFerger2024, author = {Melzner, J{\"u}rgen and Ferger, Martin}, title = {Building Information Modeling}, series = {Zahlentafeln f{\"u}r den Baubetrieb}, booktitle = {Zahlentafeln f{\"u}r den Baubetrieb}, editor = {Krause, Thomas and Ulke, Bernd and Ferger, Martin}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-41329-3 (Print)}, doi = {10.1007/978-3-658-41330-9_15}, pages = {1051 -- 1073}, year = {2024}, abstract = {Durch die Einf{\"u}hrung von Building Information Modeling (BIM) sowohl projektspezifisch als auch in ganze Unternehmungen hat die Baubranche einen weitreichenden Ver{\"a}nderungsprozess angestoßen. Building Information Modeling kann als eine Methode angesehen werden, um die Informationsasymmetrien zwischen den Projektbeteiligten so gering wie m{\"o}glich zu halten.}, language = {de} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Aerodynamic multi point design challenge}, series = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, booktitle = {New design concepts for high speed air transport.- (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, editor = {Sobieczky, H.}, publisher = {Springer}, address = {Wien [u.a.]}, isbn = {3-2118-2815-X}, doi = {10.1007/978-3-7091-2658-5_4}, pages = {53 -- 67}, year = {1997}, abstract = {In the chapter "Son of Concorde, a Technology Challenge" one of the new challenges for a Supersonic Commercial Transport (SCT) is multi-point design for the four main design points: - supersonic cruise - transonic cruise - take-off and landing - transonic acceleration.}, language = {en} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Required aerodynamic technologies}, series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, editor = {Sobieczky, H.}, publisher = {Springer}, address = {Wien [u.a.]}, isbn = {3-2118-2815-X}, doi = {10.1007/978-3-7091-2658-5_5}, pages = {69 -- 96}, year = {1997}, abstract = {In the preceeding chapters on "Son of Concorde, a Technology Challenge" and "Aerodynamic Multipoint Design Challenge" it was explained, that a well balanced contribution of new technologies in all major disciplines is required for realisation of a new Supersonic Commercial Transport (SCT). One of these technologies - usually one of the most important for aircraft-is aerodynamics. Here, the required "pure" aerodynamic technologies are specified in more detail, according to our present knowledge. Increasing insight into the problems may change the balance of importance of the individual technologies and may require some more contributions. We must never confine our knowledge to the knowledge base of an expert at a given time, but must stay open for new insights.}, language = {en} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Certification of supersonic civil transports}, series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, editor = {Sobieczky, H.}, publisher = {Springer}, address = {Wien [u.a.]}, isbn = {3-2118-2815-X}, doi = {10.1007/978-3-7091-2658-5_6}, pages = {97 -- 103}, year = {1997}, abstract = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].}, language = {en} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Supersonic laminar flow}, series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, editor = {Sobieczky, H.}, publisher = {Springer}, address = {Wien [u.a.]}, isbn = {3-2118-2815-X}, doi = {10.1007/978-3-7091-2658-5_18}, pages = {275 -- 290}, year = {1997}, abstract = {Supersonic transports are very drag sensitive. Technology to reduce drag by application of laminar flow, therefore, will be important; it is a prerequisite to achieve very long range capability. In earlier studies it was assumed that SCTs would only become possible by application of laminar flow [376]. But today, we request an SCT to be viable without application of laminar flow in order to maintain its competitiveness when laminar flow becomes available for subsonic and supersonic transports. By reducing fuel burned, laminar flow drag reduction reduces size and weight of the aircraft, or increases range capability -whereas otherwise size and weight would grow towards infinity. Transition mechanisms from laminar to turbulent state of the boundary layer flow (ALT, CFI, TSI) function as for transonic transports, but at more severe conditions: higher sweep angles, cooled surfaces; higher mode instabilities (HMI) must at least be taken into account, although they may not become important below Mach 3. Hitherto there is a worldwide lack of ground test facilities to investigate TSI at the expected cruise Mach numbers between 1.6 and 2.4; in Stuttgart, Germany one such facility -a Ludwieg tube- is still in the validation phase. A quiet Ludwieg tunnel could be a favourable choice for Europe. But it will require a new approach in designing aircraft which includes improved theoretical predictions, usage of classical wind tunnels for turbulent flow and flight tests for validation.}, language = {en} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Son of Concorde, a technology challenge}, series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)}, editor = {Sobieczky, H.}, publisher = {Springer}, address = {Wien [u.a.]}, isbn = {3-2118-2815-X}, doi = {10.1007/978-3-7091-2658-5_3}, pages = {31 -- 51}, year = {1997}, abstract = {Concorde (Figure 9) is the only supersonic airliner which has been introduced into regular passenger service. It is still in service at British Airways and Air France without any flight accidents, and probably will stay in service for at least for ten more years.}, language = {en} } @incollection{Mertens1997, author = {Mertens, Josef}, title = {Reduction of aerodynamic drag (RaWid)-Status after the first year of the program}, series = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)}, booktitle = {New results in numerical and experimental fluid mechanics. - (Notes on numerical fluid mechanics ; 60)}, publisher = {Vieweg}, address = {Braunschweig [u.a.]}, isbn = {3-528-06960-0}, doi = {10.1007/978-3-322-86573-1_2}, pages = {7 -- 14}, year = {1997}, abstract = {The technology programme "Reduction of aerodynamic drag (RaWid)" for high speed aerodynamics at Daimler-Benz Aerospace Airbus is sponsered by the German ministry for education, research and technology since July 1, 1995. Connected to this industrial programme are the cooperation programmes "MEGAFLOW" under leadership of the DLR and "Transition" by the DFG, and several contributions by DLR and universities. The programme is oriented towards technologies required for a MEGALINER which gains momentum by the ambitious plans for a new large Airbus A3XX. In the first year new technological steps were undertaken in theory, design and experiment. Some critical steps were verified by wing designs checked in wind tunnel tests.}, language = {en} } @incollection{MertensBecker1989, author = {Mertens, Josef and Becker, K.}, title = {Numerical solution of flow equations : an aircraft designer's view}, series = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)}, booktitle = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)}, editor = {Ballmann, Josef}, publisher = {Vieweg}, address = {Braunschweig}, isbn = {3-528-08098-1}, doi = {10.1007/978-3-322-87869-4_41}, pages = {403 -- 412}, year = {1989}, abstract = {Today the most accurate and cost effective industrial codes used in aircraft design are based on the full potential equation coupled with boundary layer equations. However, these are not capable to solve complicated three-dimensional problems of vortical flows and shocks. On the other hand Euler and Navier-Stokes codes are too expensive and not accurate enough for design purposes, especially in regard of drag and interference prediction. The reasons for these deficiencies are investigated and a way to overcome them by future developments is demonstrated.}, language = {en} } @incollection{MeskourisButenweg2008, author = {Meskouris, Konstantin and Butenweg, Christoph}, title = {Erdbebensichere Auslegung von Bauwerken nach DIN 4149:2005}, series = {Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2}, booktitle = {Betonkalender 2008: Konstruktiver Wasserbau, erdbebensicheres Bauen. Band 2}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-01839-2 (Print) ; 978-3-433-01854-5 (E-Book)}, doi = {10.1002/9783433600702.ch5}, pages = {1 -- 54}, year = {2008}, language = {de} } @incollection{MeskourisButenwegHinzenetal.2019, author = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger}, title = {Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response}, series = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-57550-5 (Online)}, doi = {10.1007/978-3-662-57550-5_3}, pages = {153 -- 196}, year = {2019}, abstract = {Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.}, language = {en} } @incollection{MeskourisButenwegKalkeretal.2007, author = {Meskouris, Konstantin and Butenweg, Christoph and Kalker, Ines and Mistler, Michael}, title = {Numerical simulation of historic masonry buildings}, series = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)}, booktitle = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)}, publisher = {Franz Steiner Verlag}, address = {Stuttgart}, isbn = {978-3-515-09030-8 ; 3-515-09030-4}, pages = {171 -- 189}, year = {2007}, language = {en} }