@article{ZiemonsHerzogFeinendegen1990,
  author    = {Ziemons, Karl and Herzog, H. and Feinendegen, L. E.},
  title     = {Iterative image reconstruction with weighted pixel contribution to projection element},
  series = {European Journal of Nuclear Medicine},
  volume    = {16},
  journal   = {European Journal of Nuclear Medicine},
  number    = {7},
  isbn      = {1619-7089},
  pages     = {403 -- 403},
  year      = {1990},
  language  = {en}
}
@article{ZiemonsHerzogBosettietal.1992,
  author    = {Ziemons, Karl and Herzog, H. and Bosetti, P. and Feinendegen, L. E.},
  title     = {Iterative image reconstruction with weighted pixel contribution to projection elements},
  series = {European Journal of Nuclear Medicine},
  volume    = {19},
  journal   = {European Journal of Nuclear Medicine},
  number    = {8},
  isbn      = {1619-7089},
  pages     = {588 -- 588},
  year      = {1992},
  language  = {en}
}
@article{ZiemonsHeinrichsStreunetal.2004,
  author    = {Ziemons, Karl and Heinrichs, U. and Streun, M. and Pietrzyk, U.},
  title     = {Validation of GEANT3 simulation studies with a dual-head PMT ClearPET™ prototype},
  series = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 5},
  journal   = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 5},
  issn      = {1082-3654},
  pages     = {3053 -- 3056},
  year      = {2004},
  abstract  = {The ClearPET™ project is proposed by working groups of the Crystal Clear Collaboration (CCC) to develop a 2nd generation high performance small animal positron emission tomograph (PET). High sensitivity and high spatial resolution is foreseen for the ClearPET™ camera by using a phoswich arrangement combining mixed lutetium yttrium aluminum perovskite (LuYAP:Ce) and lutetium oxyorthosilicate (LSO) scintillating crystals. Design optimizations for the first photomultiplier tube (PMT) based ClearPET camera are done with a Monte-Carlo simulation package implemented on GEANT3 (CERN, Geneva, Switzerland). A dual-head prototype has been built to test the frontend electronics and was used to validate the implementation of the GEANT3 simulation tool. Multiple simulations were performed following the experimental protocols to measure the intrinsic resolution and the sensitivity profile in axial and radial direction. Including a mean energy resolution of about 27.0\% the simulated intrinsic resolution is about (1.41±0.11)mm compared to the measured of (1.48±0.06)mm. The simulated sensitivity profiles show a mean square deviation of 12.6\% in axial direction and 3.6\% in radial direction. Satisfactorily these results are representative for all designs and confirm the scanner geometry.},
  language  = {en}
}
@article{ZiemonsBruyndonckxPerezetal.2008,
  author    = {Ziemons, Karl and Bruyndonckx, P. and Perez, J. M. and Pietrzyk, U. and Rato, P. and Tavernier, S.},
  title     = {Beyond ClearPET: Next Aims},
  series = {5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008},
  journal   = {5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro Symposium Proceedings ISBI 2008},
  isbn      = {978-1-4244-2003-2},
  pages     = {1421 -- 1424},
  year      = {2008},
  abstract  = {The CRYSTAL CLEAR collaboration, in short CCC, is a consortium of 12 academic institutions, mainly from Europe, joining efforts in the area of developing instrumentation for nuclear medicine and medical imaging. In the framework of the CCC a high performance small animal PET system, called ClearPET, was developed by using new technologies in electronics and crystals in a phoswich arrangement combining two types of lutetium- based scintillator materials: LSO:Ce and LuYAP:Ce. Our next aim will be the development of hybrid image systems. Hybrid MR-PET imaging has many unique advantages for brain research. This has sparked a new research line within CCC for the development of novel MR-PET compatible technologies. MRI is not as sensitive as PET but PET has poorer spatial resolution than MRI. Two major advantages of PET are sensitivity and its ability to acquire metabolic information. To assess these innovations, the development of a 9.4T hybrid animal MR-PET scanner is proposed based on an existing 9.4T MR scanner that will be adapted to enable simultaneous acquisition of MR and PET data using cutting- edge technology for both MR and PET.},
  language  = {en}
}
@article{ZiemonsBerghoffLanskeetal.1988,
  author    = {Ziemons, Karl and Berghoff, G. and Lanske, D. and Schultze, K.},
  title     = {Strangeness production in deep inelastic muon-nucleon scattering},
  series = {Verhandlungen der Deutschen Physikalischen Gesellschaft},
  volume    = {23},
  journal   = {Verhandlungen der Deutschen Physikalischen Gesellschaft},
  number    = {5},
  isbn      = {0420-0195},
  pages     = {T309 -- T309},
  year      = {1988},
  language  = {en}
}
@article{ZiemonsAuffrayBarbieretal.2005,
  author    = {Ziemons, Karl and Auffray, E. and Barbier, R. and Brandenburg, G. and Bruyndonckx, P.},
  title     = {The ClearPET™ project: Development of a 2nd generation high-performance small animal PET scanner},
  series = {Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  volume    = {537},
  journal   = {Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  number    = {1-2},
  issn      = {0168-9002},
  pages     = {307 -- 311},
  year      = {2005},
  abstract  = {Second generation high-performance PET scanners, called ClearPET™1, have been developed by working groups of the Crystal Clear Collaboration (CCC). High sensitivity and high spatial resolution for the ClearPET camera is achieved by using a phoswich arrangement combining two different types of lutetium-based scintillator materials: LSO from CTI and LuYAP:Ce from the CCC (ISTC project). In a first ClearPET prototype, phoswich arrangements of 8×8 crystals of 2×2×10 mm3 are coupled to multi-channel photomultiplier tubes (Hamamatsu R7600). A unit of four PMTs arranged in-line represents one of 20 sectors of the ring design. The opening diameter of the ring is 120 mm, the axial detector length is 110 mm.The PMT pulses are digitized by free-running ADCs and digital data processing determines the gamma energy, the phoswich layer and even the exact pulse starting time, which is subsequently used for coincidence detection. The gantry allows rotation of the detector modules around the field of view. Preliminary data shows a correct identification of the crystal layer about (98±1)\%. Typically the energy resolution is (23.3±0.5)\% for the luyap layer and (15.4±0.4)\% for the lso layer. early studies showed the timing resolution of 2 ns FWHM and 4.8 ns FWTM. the intrinsic spatial resolution ranges from 1.37 mm to 1.61 mm full-width of half-maximum (FWHM) with a mean of 1.48 mm FWHM. further improvements in image and energy resolution are expected when the system geometry is fully modeled.},
  language  = {en}
}
@article{ZiemonsAuffrayBarbieretal.2004,
  author    = {Ziemons, Karl and Auffray, E. and Barbier, R. and Brandenburg, G.},
  title     = {The ClearPET TM LSO/LuYAP phoswich scanner: a high performance small animal PET system},
  series = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  journal   = {2003 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  issn      = {1082-3654},
  pages     = {1728 -- 1732},
  year      = {2004},
  abstract  = {A 2nd generation high performance small animal PET scanner, called ClearPET™, has been designed and a first prototype is built by working groups of the Crystal Clear Collaboration (CCC). In order to achieve high sensitivity and maintain good uniform spatial resolution over the field of view in high resolution PET systems, it is necessary to extract the depth of interaction (DOI) information and correct for spatial degradation. The design of the first ClearPET™ Demonstrator based on the use of the multi-anode photomultiplier tube (Hamamatsu R7600-M64) and a LSO/LuYAP phoswich matrix. The two crystal layers of 8*8 crystals (2*2*10 mm3) are stacked on each other and mounted without light guide as one to one on the PMT. A unit of four PMTs arranged in-line represents one of 20 sectors of the ring design. The opening diameter of the crystal ring is 137 mm, the axial detector length is 110 mm. The PMT pulses are digitized by free-running ADCs and digital data processing determines the gamma energy, the phoswich layer and even the pulse arrival time. Single gamma interactions are recorded and coincidences are found by software. The gantry allows rotation of the detector modules around the field of view. The measurements have been done using the first LSO/LuYAP detector cassettes.},
  language  = {en}
}
@article{ZiemonsAchtenAuffrayetal.2004,
  author    = {Ziemons, Karl and Achten, R. and Auffray, E. and M{\"u}ller-Veggian, Mattea},
  title     = {The ClearPET™ neuro scanner: a dedicated LSO/LuYAP phoswich small animal PET scanner},
  series = {2004 IEEE Nuclear Science Symposium conference record : Nuclear Science Symposium, Medical Imaging Conference ; 16 - 22 October 2004, Rome, Italy ; [including the Symposium on Nuclear Power System (SNPS), 14th Room Temperature Semiconductor X- and Gamma-Ray Detectors Workshop and special focus workshops] / NPSS, Nuclear \& Plasma Sciences Society. Guest ed.: J. Anthony Seibert},
  journal   = {2004 IEEE Nuclear Science Symposium conference record : Nuclear Science Symposium, Medical Imaging Conference ; 16 - 22 October 2004, Rome, Italy ; [including the Symposium on Nuclear Power System (SNPS), 14th Room Temperature Semiconductor X- and Gamma-Ray Detectors Workshop and special focus workshops] / NPSS, Nuclear \& Plasma Sciences Society. Guest ed.: J. Anthony Seibert},
  publisher = {IEEE Operations Center},
  address   = {Piscataway, NJ},
  issn      = {1082-3654},
  pages     = {2430 -- 2433},
  year      = {2004},
  language  = {en}
}
@article{Ziemons1987,
  author    = {Ziemons, Karl},
  title     = {Jet production and fragmentation properties in deep inelastic muon scattering},
  series = {Zeitschrift f{\"u}r Physik C : Particles and Fields},
  volume    = {36},
  journal   = {Zeitschrift f{\"u}r Physik C : Particles and Fields},
  number    = {4},
  isbn      = {0170-9739},
  pages     = {527 -- 543},
  year      = {1987},
  language  = {en}
}
@article{Ziemons1988,
  author    = {Ziemons, Karl},
  title     = {A measurement of the spin asymmetry of the structure function g1 in deep inelastic muon-proton scattering},
  series = {Physics Letters B},
  volume    = {206},
  journal   = {Physics Letters B},
  number    = {2},
  isbn      = {0370-2693},
  pages     = {364 -- 370},
  year      = {1988},
  abstract  = {The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured over a large x range (0.01<x<0.7). The spin-dependent structure function g1(x) for the proton has been determined and its integral over x found to be 0.114±0.012±0.026, in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Bjorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These values for the integrals of g1 lead to the conclusion that the total quark spin constitutes a rather small fraction of the spin of the nucleon.},
  language  = {en}
}
@article{Ziemons1989,
  author    = {Ziemons, Karl},
  title     = {An investigation of the spin structure of the proton in deep inelastic scattering of polarised muons and polarised protons},
  series = {Nuclear Physics B},
  volume    = {328},
  journal   = {Nuclear Physics B},
  number    = {1},
  isbn      = {0550-3213},
  pages     = {1 -- 35},
  year      = {1989},
  abstract  = {The spin asymmetry in deep inelastic scattering of longitudinally polarised muons by longitudinally polarised protons has been measured in the range 0.01<×<0.7. The spin dependent structure function g1(x) for the proton has been determined and, combining the data with earlier SLAC measurements, its integral over x found to be 0.126±0.010(stat.)±0.015(syst.), in disagreement with the Ellis-Jaffe sum rule. Assuming the validity of the Biorken sum rule, this result implies a significant negative value for the integral of g1 for the neutron. These integrals lead to the conclusion, in the na{\"i}ve quark parton model, that the total quark spin constitutes a rather small fraction of the spin of the nucleon. Results are also presented on the asymmetries in inclusive hadron production which are consistent with the above picture.},
  language  = {en}
}
@article{Ziemons1991,
  author    = {Ziemons, Karl},
  title     = {Comparison of forward hadrons produced in muon interactions on nuclear targets and deuterium},
  series = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  volume    = {52},
  journal   = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  number    = {1},
  isbn      = {1431-5858},
  pages     = {1 -- 11},
  year      = {1991},
  abstract  = {Differential multiplicities of forward produced hadrons in deep inelastic muon scattering on nuclear targets have been compared with those from deuterium. The ratios are observed to increase towards unity as the virtual photon energy increases with no significant dependence on the other muon kinematic variables. The hadron transverse momentum distribution is observed to be broadened in nuclear targets. The dependence on the remaining hadron variables is investigated and the results are discussed in the framework of intranuclear interaction models and in the context of the EMC effect.},
  language  = {en}
}
@article{Ziemons1992,
  author    = {Ziemons, Karl},
  title     = {Muoproduction of J/ψ and the gluon distribution of the nucleon},
  series = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  volume    = {56},
  journal   = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  number    = {1},
  isbn      = {1431-5858},
  pages     = {21 -- 28},
  year      = {1992},
  abstract  = {Measurements are presented of the inclusive distributions of the J/Ψ meson produced by muons of energy 200 GeV from an ammonia target. The gluon distribution of the nucleon has been derived from the data in the range 0.04<x<0.36 using a technique based on the colour singlet model. An arbitrary normalisation factor is required to obtain a reasonable integral of the gluon distribution. Some comments are made on the use of J/Ψ productionby virtual photons to extract the gluon distribution at HERA.},
  language  = {en}
}
@article{Ziemons1993,
  author    = {Ziemons, Karl},
  title     = {A measurement of the ratio of the nucleon structure function in copper and deuterium},
  series = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  volume    = {57},
  journal   = {Zeitschrift f{\"u}r Physik C Particles and Fields},
  number    = {2},
  isbn      = {1431-5858},
  pages     = {211 -- 218},
  year      = {1993},
  abstract  = {Results are presented on the ratios of the nucleon structure function in copper to deuterium from two separate experiments. The data confirm that the nucleon structure function,F 2, is different for bound nucleons than for the quasi-free ones in the deuteron. The redistribution in the fraction of the nucleon's momentum carried by quarks is investigated and it is found that the data are compatible with no integral loss of quark momenta due to nuclear effects.},
  language  = {en}
}
@inproceedings{ZieglerSchuellerMottaghy2013,
  author    = {Ziegler, M. and Sch{\"u}ller, R. and Mottaghy, Darius},
  title     = {Numerical simulation of energy consumption of artificial ground freezing applications subject to water seepage},
  series = {Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013},
  booktitle = {Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013},
  pages     = {2985 -- 2988},
  year      = {2013},
  language  = {en}
}
@incollection{ZhubanovaMansurovDigel2020,
  author    = {Zhubanova, Azhar A. and Mansurov, Zulkhair A. and Digel, Ilya},
  title     = {Use of Advanced Nanomaterials for Bioremediation of Contaminated Ecosystems},
  series = {Carbon Nanomaterials in Biomedicine and the Environment},
  booktitle = {Carbon Nanomaterials in Biomedicine and the Environment},
  publisher = {Jenny Stanford Publishing},
  address   = {Singapore},
  isbn      = {978-981-4800-27-3},
  doi       = {10.1201/9780429428647-18},
  pages     = {353 -- 378},
  year      = {2020},
  abstract  = {This chapter shows that nanomaterials obtained by high-temperature carbonization of inexpensive plant raw material such as rice husk, grape seeds, and walnut shells can serve as a basis for the production of highly efficient microbial drugs, biodestructors, biosorbents, and biocatalysts, which are promising for the remediation of the ecosystem contaminated with heavy and radioactive metals, oil and oil products. A strong interest in engineering zymology is dictated by the necessity to address the issues of monitoring enzymatic processes, treatment, and diagnosis of a number of common human diseases, environmental pollution, quality control of pharmaceuticals and food. Nanomaterials obtained by high-temperature carbonization of cheap plant raw material such as-rice husks, grape seeds and walnut shells, can serve as a basis for creating of highly effective microbial preparations-biodestructors, biosorbents and biocatalysts, which are promising for the use of contaminated ecosystems, and for restoration of human intestine microecology.},
  language  = {en}
}
@article{ZhubanovaDigelNojimaetal.2007,
  author    = {Zhubanova, Azhar A. and Digel, Ilya and Nojima, H. and Artmann, Gerhard},
  title     = {The use of bactericidal effects of cluster ions generated by plasma in medical biotechnology},
  year      = {2007},
  abstract  = {The most of conventional methods of air purification use the power of a fan to draw in air and pass it through a filter. The problem of bacterial contamination of inner parts of such a type of air conditioners in some cases draws attention towards alternative air-cleaning systems. Some manufacturers offer to use the ozone's bactericidal and deodorizing effects, but the wide spreading of such systems is restricted by the fact that toxic effects of ozone in respect of human beings are well known. In 2000 Sharp Inc. introduced "Plasma Cluster Ions (PCI)" air purification technology, which uses plasma discharge to generate cluster ions (I 0-14 ). This technology has been developed for those customers that are conscious about health and hygiene. In our experiments, we focused on some principal aspects of plasma-generated ions application - time-dependency and irreversibility of bactericidal action, spatial and kinetic characteristics of emitted cluster particles, their chemical targets in the microbial cells.},
  subject      = {Clusterion},
  language  = {en}
}
@article{ZhubanovaAknazarovMansurovetal.2010,
  author    = {Zhubanova, Azhar A. and Aknazarov, S. K. and Mansurov, Zulkhair and Digel, Ilya and Kozhalakova, A. A. and Akimbekov, Nuraly Shardarbekovich and O'Heras, Carlos and Tazhibayeva, S. and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials},
  year      = {2010},
  abstract  = {Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.},
  subject      = {Kohlenstofffaser},
  language  = {en}
}
@article{ZhenLiangStaatetal.2024,
  author    = {Zhen, Manghao and Liang, Yunpei and Staat, Manfred and Li, Quanqui and Li, Jianbo},
  title     = {Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression},
  series = {Theoretical and Applied Fracture Mechanics},
  volume    = {131},
  journal   = {Theoretical and Applied Fracture Mechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-8442},
  doi       = {10.1016/j.tafmec.2024.104373},
  pages     = {Artikel 104373},
  year      = {2024},
  abstract  = {The deformation and damage laws of non-homogeneous irregular structural planes in rocks are the basis for studying the stability of rock engineering. To investigate the damage characteristics of rock containing non-parallel fissures, uniaxial compression tests and numerical simulations were conducted on sandstone specimens containing three non-parallel fissures inclined at 0°, 45° and 90° in this study. The characteristics of crack initiation and crack evolution of fissures with different inclinations were analyzed. A constitutive model for the discontinuous fractures of fissured sandstone was proposed. The results show that the fracture behaviors of fissured sandstone specimens are discontinuous. The stress-strain curves are non-smooth and can be divided into nonlinear crack closure stage, linear elastic stage, plastic stage and brittle failure stage, of which the plastic stage contains discontinuous stress drops. During the uniaxial compression test, the middle or ends of 0° fissures were the first to crack compared to 45° and 90° fissures. The end with small distance between 0° and 45° fissures cracked first, and the end with large distance cracked later. After the final failure, 0° fissures in all specimens were fractured, while 45° and 90° fissures were not necessarily fractured. Numerical simulation results show that the concentration of compressive stress at the tips of 0°, 45° and 90° fissures, as well as the concentration of tensile stress on both sides, decreased with the increase of the inclination angle. A constitutive model for the discontinuous fractures of fissured sandstone specimens was derived by combining the logistic model and damage mechanic theory. This model can well describe the discontinuous drops of stress and agrees well with the whole processes of the stress-strain curves of the fissured sandstone specimens.},
  language  = {en}
}
@article{ZhantlessovaSavitskayaKistaubayevaetal.2022,
  author    = {Zhantlessova, Sirina and Savitskaya, Irina and Kistaubayeva, Aida and Ignatova, Ludmila and Talipova, Aizhan and Pogrebnjak, Alexander and Digel, Ilya},
  title     = {Advanced "Green" prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy},
  series = {Polymers},
  volume    = {14},
  journal   = {Polymers},
  number    = {15},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  doi       = {10.3390/polym14153224},
  pages     = {Artikel 3224},
  year      = {2022},
  abstract  = {Bacterial cellulose (BC) is a biopolymer produced by different microorganisms, but in biotechnological practice, Komagataeibacter xylinus is used. The micro- and nanofibrillar structure of BC, which forms many different-sized pores, creates prerequisites for the introduction of other polymers into it, including those synthesized by other microorganisms. The study aims to develop a cocultivation system of BC and prebiotic producers to obtain BC-based composite material with prebiotic activity. In this study, pullulan (PUL) was found to stimulate the growth of the probiotic strain Lactobacillus rhamnosus GG better than the other microbial polysaccharides gellan and xanthan. BC/PUL biocomposite with prebiotic properties was obtained by cocultivation of Komagataeibacter xylinus and Aureobasidium pullulans, BC and PUL producers respectively, on molasses medium. The inclusion of PUL in BC is proved gravimetrically by scanning electron microscopy and by Fourier transformed infrared spectroscopy. Cocultivation demonstrated a composite effect on the aggregation and binding of BC fibers, which led to a significant improvement in mechanical properties. The developed approach for "grafting" of prebiotic activity on BC allows preparation of environmentally friendly composites of better quality.},
  language  = {en}
}
@article{ZhangHeimbachScheeretal.2016,
  author    = {Zhang, Jin and Heimbach, Tycho and Scheer, Nico and Barve, Avantika and Li, Wenkui and Lin, Wen and He, Handan},
  title     = {Clinical Exposure Boost Predictions by Integrating Cytochrome P450 3A4-Humanized Mouse Studies With PBPK Modeling},
  series = {Journal of Pharmaceutical Sciences},
  volume    = {Volume 105},
  journal   = {Journal of Pharmaceutical Sciences},
  number    = {Issue 4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0022-3549},
  doi       = {doi.org/10.1016/j.xphs.2016.01.021},
  pages     = {1398 -- 1404},
  year      = {2016},
  abstract  = {NVS123 is a poorly water-soluble protease 56 inhibitor in clinical development. Data from in vitro hepatocyte studies suggested that NVS123 is mainly metabolized by CYP3A4. As a consequence of limited solubility, NVS123 therapeutic plasma exposures could not be achieved even with high doses and optimized formulations. One approach to overcome NVS123 developability issues was to increase plasma exposure by coadministrating it with an inhibitor of CYP3A4 such as ritonavir. A clinical boost effect was predicted by using physiologically based pharmacokinetic (PBPK) modeling. However, initial boost predictions lacked sufficient confidence because a key parameter, fraction of drug metabolized by CYP3A4 (ƒₘCYP3A4), could not be estimated with accuracy on account of disconnects between in vitro and in vivo preclinical data. To accurately estimate ƒₘCYP3A4 in human, an in vivo boost effect study was conducted using CYP3A4-humanized mouse model which showed a 33- to 56-fold exposure boost effect. Using a top-down approach, human ƒₘCYP3A4 for NVS123 was estimated to be very high and included in the human PBPK modeling to support subsequent clinical study design. The combined use of the in vivo boost study in CYP3A4-humanized mouse model mice along with PBPK modeling accurately predicted the clinical outcome and identified a significant NVS123 exposure boost (∼42-fold increase) with ritonavir.},
  language  = {en}
}
@article{ZhangValeroBungetal.2018,
  author    = {Zhang, G. and Valero, Daniel and Bung, Daniel B. and Chanson, H.},
  title     = {On the estimation of free-surface turbulence using ultrasonic sensors},
  series = {Flow Measurement and Instrumentation},
  volume    = {60},
  journal   = {Flow Measurement and Instrumentation},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0955-5986},
  doi       = {10.1016/j.flowmeasinst.2018.02.009},
  pages     = {171 -- 184},
  year      = {2018},
  abstract  = {Accurate determination of free-surface dynamics has attracted much research attention during the past decade and has important applications in many environmental and water related areas. In this study, the free-surface dynamics in several turbulent flows commonly found in nature were investigated using a synchronised setup consisting of an ultrasonic sensor and a high-speed video camera. Basic sensor capabilities were examined in dry conditions to allow for a better characterisation of the present sensor model. The ultrasonic sensor was found to adequately reproduce free-surface dynamics up to the second order, especially in two-dimensional scenarios with the most energetic modes in the low frequency range. The sensor frequency response was satisfactory in the sub-20 Hz band, and its signal quality may be further improved by low-pass filtering prior to digitisation. The application of the USS to characterise entrapped air in high-velocity flows is also discussed.},
  language  = {en}
}
@article{ZerlinKasischkeDigeletal.2007,
  author    = {Zerlin, Kay and Kasischke, Nicole and Digel, Ilya and Maggakis-Kelemen, Christina and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Kayser, Peter and Linder, Peter and Artmann, Gerhard},
  title     = {Structural transition temperature of hemoglobins correlates with species' body temperature},
  series = {European Biophysics Journal. 37 (2007), H. 1},
  journal   = {European Biophysics Journal. 37 (2007), H. 1},
  isbn      = {1432-1017},
  pages     = {1 -- 10},
  year      = {2007},
  language  = {en}
}
@article{ZerlinDigelStadleretal.2007,
  author    = {Zerlin, Kay and Digel, Ilya and Stadler, Andreas M. and B{\"u}ldt, Georg and Zaccai, Guiseppe and Artmann, Gerhard},
  title     = {Dynamics and interactions of hemoglobin in human red blood cells and concentrated hemoglobin solutions},
  series = {Regenerative medicine. 2 (2007), H. 5},
  journal   = {Regenerative medicine. 2 (2007), H. 5},
  isbn      = {1746-0751},
  pages     = {573 -- 573},
  year      = {2007},
  language  = {en}
}
@article{ZatkoDubeckyBohaceketal.2004,
  author    = {Zatko, B. and Dubeck{\´y}, F. and Bohacek, P. and Gombia, E. and Frigeri, P. and Mosca, R. and Franchi, S. and Huarn, J. and Nescas, V. and Sekacova, M. and F{\"o}rster, Arnold and Kordos, P.},
  title     = {On the spectrometric performance limit of radiation detectors based on semi-insulating GaAs},
  series = {Nuclear instruments and methods in physics research, Section A. 531 (2004), H. 1-2},
  journal   = {Nuclear instruments and methods in physics research, Section A. 531 (2004), H. 1-2},
  isbn      = {0168-9002},
  pages     = {111 -- 120},
  year      = {2004},
  language  = {en}
}
@article{ZastrowRieder1980,
  author    = {Zastrow, Udo and Rieder, G.},
  title     = {Bracketing eigenvalues of an oscillating elastic body by integral equations},
  series = {Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, M{\´a}traf{\"u}red (Hungary), 21 - 23 February, 1979 / ed. by {\`A}. Bosznay},
  journal   = {Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, M{\´a}traf{\"u}red (Hungary), 21 - 23 February, 1979 / ed. by {\`A}. Bosznay},
  publisher = {Akad. Kiad{\´o}},
  address   = {Budapest},
  isbn      = {963-05-2625-5},
  pages     = {421 -- 434},
  year      = {1980},
  language  = {en}
}
@article{ZastrowPanagiotopoulos1979,
  author    = {Zastrow, Udo and Panagiotopoulos, P. D.},
  title     = {An integral "Equation" approach to the unilateral contact problem},
  series = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 59 (1979), H. 8},
  journal   = {ZAMM - Zeitschrift f{\"u}r angewandte Mathematik und Mechanik. 59 (1979), H. 8},
  isbn      = {1521-4001},
  pages     = {392 -- 393},
  year      = {1979},
  language  = {en}
}
@article{ZastrowHackl1988,
  author    = {Zastrow, Udo and Hackl, Klaus},
  title     = {On the existence, uniqueness and completeness of displacements and stress functions in linear elasticity / Hackl, Klaus ; Zastrow, Udo},
  series = {Journal of Elasticity. 19 (1988), H. 1},
  journal   = {Journal of Elasticity. 19 (1988), H. 1},
  isbn      = {1573-2681},
  pages     = {3 -- 23},
  year      = {1988},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {On the formulation of the fundamental solutions for orthotropic plane elasticity},
  series = {Acta Mechanica. 57 (1985), H. 3-4},
  journal   = {Acta Mechanica. 57 (1985), H. 3-4},
  isbn      = {1619-6937},
  pages     = {113 -- 122},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {On the complete system of fundamental solutions for anisotropic slices and slabs: A comparison by use of the slab analogy},
  series = {Journal of Elasticity. 15 (1985), H. 3},
  journal   = {Journal of Elasticity. 15 (1985), H. 3},
  isbn      = {1573-2681},
  pages     = {293 -- 318},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Basic geometrical singularities in plane-elasticity and plate-bending problems},
  series = {International Journal of Solids and Structures. 21 (1985), H. 10},
  journal   = {International Journal of Solids and Structures. 21 (1985), H. 10},
  isbn      = {0020-7683},
  pages     = {1047 -- 1067},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Numerical plane stress analysis by integral equations based on the singularity method},
  series = {SM archives . 10 (1985)},
  journal   = {SM archives . 10 (1985)},
  isbn      = {0376-7426},
  pages     = {113 -- 128},
  year      = {1985},
  language  = {en}
}
@article{Zastrow1982,
  author    = {Zastrow, Udo},
  title     = {Solution of plane anisotropic elastostatical boundary value problems by singular integral equations},
  series = {Acta Mechanica. 44 (1982), H. 1-2},
  journal   = {Acta Mechanica. 44 (1982), H. 1-2},
  isbn      = {1619-6937},
  pages     = {59 -- 71},
  year      = {1982},
  language  = {en}
}
@article{ZangeSchopenAlbrachtetal.2017,
  author    = {Zange, Jochen and Schopen, Kathrin and Albracht, Kirsten and Gerlach, Darius A. and Frings-Meuthen, Petra and Maffiuletti, Nicola A. and Bloch, Wilhelm and Rittweger, J{\"o}rn},
  title     = {Using the Hephaistos orthotic device to study countermeasure effectiveness of neuromuscular electrical stimulation and dietary lupin protein supplementation, a randomised controlled trial},
  series = {Plos one},
  volume    = {12},
  journal   = {Plos one},
  number    = {2},
  doi       = {10.1371/journal.pone.0171562},
  year      = {2017},
  language  = {en}
}
@inproceedings{ZangHessRingbecketal.2002,
  author    = {Zang, Zhigang and Hess, Holger and Ringbeck, Thorsten and Schwarte, Rudolf},
  title     = {Phase-lock techniques using new correlation receivers for TOF-laser ranging},
  series = {Laser radar technology and applications VII : 3 - 4 April 2002, Orlando, USA. - (SPIE proceedings series ; 4723)},
  booktitle = {Laser radar technology and applications VII : 3 - 4 April 2002, Orlando, USA. - (SPIE proceedings series ; 4723)},
  editor    = {Kamerman, Gary W.},
  publisher = {SPIE, International Society for Optical Engineering},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-4473-1},
  issn      = {0038-7355},
  pages     = {112 -- 120},
  year      = {2002},
  language  = {en}
}
@inproceedings{ZahraPhaniSrujanCaminosetal.2022,
  author    = {Zahra, Mahdi and Phani Srujan, Merige and Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and Dersch, J{\"u}rgen},
  title     = {Modeling the thermal behavior of solar salt in electrical resistance heaters for the application in PV-CSP hybrid power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086268},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {Concentrated Solar Power (CSP) systems are able to store energy cost-effectively in their integrated thermal energy storage (TES). By intelligently combining Photovoltaics (PV) systems with CSP, a further cost reduction of solar power plants is expected, as well as an increase in dispatchability and flexibility of power generation. PV-powered Resistance Heaters (RH) can be deployed to raise the temperature of the molten salt hot storage from 385 °C up to 565 °C in a Parabolic Trough Collector (PTC) plant. To avoid freezing and decomposition of molten salt, the temperature distribution in the electrical resistance heater is investigated in the present study. For this purpose, a RH has been modeled and CFD simulations have been performed. The simulation results show that the hottest regions occur on the electric rod surface behind the last baffle. A technical optimization was performed by adjusting three parameters: Shell-baffle clearance, electric rod-baffle clearance and number of baffles. After the technical optimization was carried out, the temperature difference between the maximum temperature and the average outlet temperature of the salt is within the acceptable limits, thus critical salt decomposition has been avoided. Additionally, the CFD simulations results were analyzed and compared with results obtained with a one-dimensional model in Modelica.},
  language  = {en}
}
@book{YoshinobuSchoening2020,
  author    = {Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressing and chemical imaging technologies for electrochemical sensing},
  editor    = {Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {978-3-03943-029-1},
  doi       = {10.3390/books978-3-03943-029-1},
  pages     = {122 Pages},
  year      = {2020},
  language  = {en}
}
@article{YoshinobuSchoening2021,
  author    = {Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable potentiometric sensors (LAPS) for cell monitoring and biosensing},
  series = {Current Opinion in Electrochemistry},
  journal   = {Current Opinion in Electrochemistry},
  number    = {In Press, Journal Pre-proof},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2451-9103},
  doi       = {10.1016/j.coelec.2021.100727},
  year      = {2021},
  language  = {en}
}
@article{YoshinobuMoritzFingeretal.2006,
  author    = {Yoshinobu, Tatsuo and Moritz, Werner and Finger, Friedhelm and Sch{\"o}ning, Michael Josef},
  title     = {Application of thin-film amorphous silicon to chemical imaging},
  series = {Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.},
  journal   = {Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.},
  number    = {Paper 0910-A-20-01},
  editor    = {Comini, Elisabetta},
  isbn      = {9781558998711},
  pages     = {1 -- 10},
  year      = {2006},
  language  = {en}
}
@article{YoshinobuMiyamotoWerneretal.2017,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-ichiro and Werner, Frederik and Poghossian, Arshak and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable potentiometric sensors for quantitative spatial imaging of chemical species},
  series = {Annual Review of Analytical Chemistry},
  volume    = {10},
  journal   = {Annual Review of Analytical Chemistry},
  publisher = {Annual Reviews},
  address   = {Palo Alto, Calif.},
  issn      = {1936-1327},
  doi       = {10.1146/annurev-anchem-061516-045158},
  pages     = {225 -- 246},
  year      = {2017},
  abstract  = {A light-addressable potentiometric sensor (LAPS) is a semiconductor-based chemical sensor, in which a measurement site on the sensing surface is defined by illumination. This light addressability can be applied to visualize the spatial distribution of pH or the concentration of a specific chemical species, with potential applications in the fields of chemistry, materials science, biology, and medicine. In this review, the features of this chemical imaging sensor technology are compared with those of other technologies. Instrumentation, principles of operation, and various measurement modes of chemical imaging sensor systems are described. The review discusses and summarizes state-of-the-art technologies, especially with regard to the spatial resolution and measurement speed; for example, a high spatial resolution in a submicron range and a readout speed in the range of several tens of thousands of pixels per second have been achieved with the LAPS. The possibility of combining this technology with microfluidic devices and other potential future developments are discussed.},
  language  = {en}
}
@inproceedings{YoshinobuMiyamotoWagneretal.2012,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-Ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Miniaturized and high-speed chemical imaging systems},
  series = {Nano-Biomedical Engineering 2012. Proceedings of the Tohoku University Global Centre of Excellence Programme, Sakura Hall, Tohoku University, Sendai Japan, 5 - 6 March 2012},
  booktitle = {Nano-Biomedical Engineering 2012. Proceedings of the Tohoku University Global Centre of Excellence Programme, Sakura Hall, Tohoku University, Sendai Japan, 5 - 6 March 2012},
  editor    = {Yamaguchi, Takami},
  publisher = {World Scientific},
  address   = {Singapur},
  doi       = {10.1142/9781848169067_0045},
  pages     = {386 -- 395},
  year      = {2012},
  language  = {en}
}
@article{YoshinobuMiyamotoWagneretal.2015,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Recent developments of chemical imaging sensor systems based on the principle of the light-addressable potentiometric sensor},
  series = {Sensors and actuators B: Chemical},
  volume    = {207, Part B},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.09.002},
  pages     = {926 -- 932},
  year      = {2015},
  abstract  = {The light-addressable potentiometric sensor (LAPS) is an electrochemical sensor with a field-effect structure to detect the variation of the Nernst potential at its sensor surface, the measured area on which is defined by illumination. Thanks to this light-addressability, the LAPS can be applied to chemical imaging sensor systems, which can visualize the two-dimensional distribution of a particular target ion on the sensor surface. Chemical imaging sensor systems are expected to be useful for analysis of reaction and diffusion in various electrochemical and biological samples. Recent developments of LAPS-based chemical imaging sensor systems, in terms of the spatial resolution, measurement speed, image quality, miniaturization and integration with microfluidic devices, are summarized and discussed.},
  language  = {en}
}
@article{YoshinobuMiyamotoWagneretal.2024,
  author    = {Yoshinobu, Tatsuo and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Field-effect sensors combined with the scanned light pulse technique: from artificial olfactory images to chemical imaging technologies},
  series = {Chemosensors},
  volume    = {12},
  journal   = {Chemosensors},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors12020020},
  pages     = {Artikel 20},
  year      = {2024},
  abstract  = {The artificial olfactory image was proposed by Lundstr{\"o}m et al. in 1991 as a new strategy for an electronic nose system which generated a two-dimensional mapping to be interpreted as a fingerprint of the detected gas species. The potential distribution generated by the catalytic metals integrated into a semiconductor field-effect structure was read as a photocurrent signal generated by scanning light pulses. The impact of the proposed technology spread beyond gas sensing, inspiring the development of various imaging modalities based on the light addressing of field-effect structures to obtain spatial maps of pH distribution, ions, molecules, and impedance, and these modalities have been applied in both biological and non-biological systems. These light-addressing technologies have been further developed to realize the position control of a faradaic current on the electrode surface for localized electrochemical reactions and amperometric measurements, as well as the actuation of liquids in microfluidic devices.},
  language  = {en}
}
@incollection{YoshinobuKrauseMiyamotoetal.2018,
  author    = {Yoshinobu, Tatsuo and Krause, Steffi and Miyamoto, Ko-ichiro and Werner, Frederik and Poghossian, Arshak and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {(Bio-)chemical Sensing and Imaging by LAPS and SPIM},
  series = {Label-free biosensing: advanced materials, devices and applications},
  booktitle = {Label-free biosensing: advanced materials, devices and applications},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-75219-8},
  pages     = {103 -- 132},
  year      = {2018},
  abstract  = {The light-addressable potentiometric sensor (LAPS) and scanning photo-induced impedance microscopy (SPIM) are two closely related methods to visualise the distributions of chemical species and impedance, respectively, at the interface between the sensing surface and the sample solution. They both have the same field-effect structure based on a semiconductor, which allows spatially resolved and label-free measurement of chemical species and impedance in the form of a photocurrent signal generated by a scanning light beam. In this article, the principles and various operation modes of LAPS and SPIM, functionalisation of the sensing surface for measuring various species, LAPS-based chemical imaging and high-resolution sensors based on silicon-on-sapphire substrates are described and discussed, focusing on their technical details and prospective applications.},
  language  = {en}
}
@article{YoshinobuYasuhitoIwasakietal.2004,
  author    = {Yoshinobu, T. and Yasuhito, U. and Iwasaki, H. and N{\"a}ther, Niko and Sch{\"o}ning, Michael Josef and Koudelka-Hep, M.},
  title     = {Applications of the light-addressable potentiometric sensor to microfluidic devices},
  series = {Digest of technical papers : September 12 - 15, 2004, Rome, Italy, Pontificia Universitas Sancto Thoma Aquinate in Urbe / [conference chairperson: C. Di Natale].},
  journal   = {Digest of technical papers : September 12 - 15, 2004, Rome, Italy, Pontificia Universitas Sancto Thoma Aquinate in Urbe / [conference chairperson: C. Di Natale].},
  address   = {Roma},
  isbn      = {88-7621-282-5},
  pages     = {434 -- 437},
  year      = {2004},
  language  = {en}
}
@article{YoshinobuUiIwasakietal.2004,
  author    = {Yoshinobu, T. and Ui, Y. and Iwasaki, H. and N{\"a}ther, Niko and Koudelka-Hep, M. and Sch{\"o}ning, Michael Josef},
  title     = {Potentiometric imaging in a microfluidic channel},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {998 -- 999},
  year      = {2004},
  language  = {en}
}
@article{YoshinobuSchoeningOttoetal.2002,
  author    = {Yoshinobu, T. and Sch{\"o}ning, Michael Josef and Otto, R. and Furuichi, K. and Mourzina, Yu and Ermelenko, Yu and Iwasaki, I.},
  title     = {Portable light-addressable potentiometric sensor (LAPS) for multisensor applications},
  series = {Book of abstracts / ed. by J. Saneistr.},
  journal   = {Book of abstracts / ed. by J. Saneistr.},
  publisher = {Czech Technical University, Faculty of Electrical Engineering, Department of Measurement},
  address   = {Prague},
  isbn      = {80-01-02576-4},
  pages     = {898 -- 901},
  year      = {2002},
  language  = {en}
}
@article{YoshinobuSchoeningOttoetal.2003,
  author    = {Yoshinobu, T. and Sch{\"o}ning, Michael Josef and Otto, R. and Furuichi, K. and Mourzina, Y. and Ermelenko, Y. and Iwasaki, H.},
  title     = {Portable light-addressable potentiometric sensor (LAPS) for multisensor applications},
  series = {Sensors and Actuators B. 95 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 95 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {352 -- 356},
  year      = {2003},
  language  = {en}
}
@article{YoshinobuSchoeningFingeretal.2004,
  author    = {Yoshinobu, T. and Sch{\"o}ning, Michael Josef and Finger, F. and Moritz, W. and Iwasaki, H.},
  title     = {Fabrication of thin-film LAPS with amorphous silicon},
  series = {Sensors. 4 (2004), H. 10},
  journal   = {Sensors. 4 (2004), H. 10},
  isbn      = {1424-8220},
  pages     = {163 -- 169},
  year      = {2004},
  language  = {en}
}
@inproceedings{YoshinobuSchoeningFingeretal.2003,
  author    = {Yoshinobu, T. and Sch{\"o}ning, Michael Josef and Finger, F. and Moritz, W. and Iwasaki, H.},
  title     = {Thin-film a-Si LAPS : Preparation and pH sensitivity},
  series = {Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimar{\~a}es, Portugal, September 21 - 24, 2003},
  booktitle = {Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimar{\~a}es, Portugal, September 21 - 24, 2003},
  pages     = {88 -- 89},
  year      = {2003},
  language  = {en}
}
@article{YoshinobuIwasakiUietal.2005,
  author    = {Yoshinobu, T. and Iwasaki, H. and Ui, Y. and Furuichi, K. and Ermelenko, Y. and Mourzina, Y. and Wagner, Torsten and N{\"a}ther, Niko and Sch{\"o}ning, Michael Josef},
  title     = {The light-addressable potentiometric sensor for multi-ion sensing and imaging},
  series = {Methods. 37 (2005), H. 1},
  journal   = {Methods. 37 (2005), H. 1},
  isbn      = {1046-2023},
  pages     = {99 -- 102},
  year      = {2005},
  language  = {en}
}
@article{YoshinobuErmelenkoMourzinaetal.2003,
  author    = {Yoshinobu, T. and Ermelenko, Y. and Mourzina, Y. and Sch{\"o}ning, Michael Josef and Iwasaki, H. and Vlasov, Y.},
  title     = {Multi-component analysis based on the light-addressable potentiometric sensor (LAPS)},
  series = {Proceedings : 11th international conference Sensor 2003; 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany},
  journal   = {Proceedings : 11th international conference Sensor 2003; 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany},
  publisher = {AMA Service},
  address   = {Wunstorf},
  pages     = {141 -- 144},
  year      = {2003},
  language  = {en}
}
@article{YoshinobuEckenPoghossianetal.2001,
  author    = {Yoshinobu, T. and Ecken, H. and Poghossian, Arshak and Simonis, A. and Iwasaki, H. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Constant-current-mode LAPS (CLAPS) for the detection of penicillin},
  series = {Electroanalysis. 13 (2001), H. 8-9},
  journal   = {Electroanalysis. 13 (2001), H. 8-9},
  isbn      = {1040-0397},
  pages     = {733 -- 736},
  year      = {2001},
  language  = {en}
}
@article{YoshinobuEckenPoghossianetal.2001,
  author    = {Yoshinobu, T. and Ecken, H. and Poghossian, Arshak and L{\"u}th, H. and Iwasaki, H. and Sch{\"o}ning, Michael Josef},
  title     = {Alternative sensor materials for light-addressable potentiometric sensors},
  series = {Sensors and Actuators B. 76 (2001), H. 1-3},
  journal   = {Sensors and Actuators B. 76 (2001), H. 1-3},
  isbn      = {0925-4005},
  pages     = {388 -- 392},
  year      = {2001},
  language  = {en}
}
@article{YoshinobuEckenIsmailetal.2001,
  author    = {Yoshinobu, T. and Ecken, H. and Ismail, Md.A.B. and Iwasaki, H. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Chemical imaging sensor and its application to biological systems},
  series = {Scaling down in electrochemistry : electrochemical micro- and nanosystem technology ; proceedings of the 3rd International Symposium on Electrochemical Microsystem Technologies, Garmisch-Patenkirchen, Germany, 11 - 15 September 2000 / ed. by J. W. Schultz},
  journal   = {Scaling down in electrochemistry : electrochemical micro- and nanosystem technology ; proceedings of the 3rd International Symposium on Electrochemical Microsystem Technologies, Garmisch-Patenkirchen, Germany, 11 - 15 September 2000 / ed. by J. W. Schultz},
  publisher = {Elsevier [u.a.]},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-08-044014-2},
  pages     = {259 -- 263},
  year      = {2001},
  language  = {en}
}
@article{YazdanbakhshSolbachBitz2012,
  author    = {Yazdanbakhsh, Pedram and Solbach, Klaus and Bitz, Andreas},
  title     = {Variable power combiner for RF mode shimming in 7-T MR imaging},
  series = {IEEE Transaction on Biomedical Engineering},
  volume    = {59},
  journal   = {IEEE Transaction on Biomedical Engineering},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {1558-2531},
  doi       = {10.1109/TBME.2012.2205926},
  pages     = {2549 -- 2557},
  year      = {2012},
  abstract  = {This contribution discusses the utilization of RF power in an MRI system with RF mode shimming which enables the superposition of circularly polarized modes of a transmit RF coil array driven by a Butler matrix. Since the required power for the individual modes can vary widely, mode-shimming can result in a significant underutilization of the total available RF power. A variable power combiner (VPC) is proposed to improve the power utilization: it can be realized as a reconfiguration of the MRI transmit system by the inclusion of one additional matrix network which receives the power from all transmit amplifiers at its input ports and provides any desired (combined) power distribution at its output ports by controlling the phase and amplitude of the amplifiers' input signals. The power distribution at the output ports of the VPC is then fed into the "mode" ports of the coil array Butler matrix in order to superimpose the spatial modes at the highest achievable power utilization. The VPC configuration is compared to the standard configuration of the transmit chain of our MRI system with 8 transmit channels and 16 coils. In realistic scenarios, improved power utilization was achieved from 17\% to 60\% and from 14\% to 55\% for an elliptical phantom and a region of interest in the abdomen, respectively, and an increase of the power utilization of 1 dB for a region of interest in the upper leg. In general, it is found that the VPC allows significant improvement in power utilization when the shimming solution demands only a few modes to be energized, while the technique can yield loss in power utilization in cases with many modes required at high power level.},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2015,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and Br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars Peter and Rittweger, J{\"o}rn},
  title     = {On the relationship between tibia torsional deformation and regional muscle contractions in habitual human exercises in vivo},
  series = {Journal of Biomechanics},
  volume    = {48},
  journal   = {Journal of Biomechanics},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2014.12.031},
  pages     = {456 -- 464},
  year      = {2015},
  language  = {en}
}
@article{YangKriechbaumerAlbrachtetal.2014,
  author    = {Yang, Peng-Fei and Kriechbaumer, Andreas and Albracht, Kirsten and Sanno, Maximilian and Ganse, Bergita and Koy, Timmo and Shang, Peng and br{\"u}ggemann, Gert-Peter and M{\"u}ller, Lars Peter and Rittweger, J{\"o}rn},
  title     = {A novel optical approach for assessing in vivo bone segment deformation and its application in muscle-bone relationship studies in humans},
  series = {Journal of Orthopaedic Translation},
  volume    = {2},
  journal   = {Journal of Orthopaedic Translation},
  number    = {4},
  publisher = {Elsevier},
  address   = {Singapore},
  issn      = {2214-0328},
  doi       = {10.1016/j.jot.2014.07.078},
  pages     = {238 -- 238},
  year      = {2014},
  language  = {en}
}
@inproceedings{XuSchwarteHeinoletal.1998,
  author    = {Xu, Zhanping and Schwarte, Rudolf and Heinol, Horst-Guenther and Buxbaum, Bernd and Ringbeck, Thorsten},
  title     = {Smart pixel : photonic mixer device (PMD) ; new system concept of a 3D-imaging camera-on-a-chip},
  series = {Proceedings : M2VIP '98; Nanjing, China, 10th - 12th September 1998},
  booktitle = {Proceedings : M2VIP '98; Nanjing, China, 10th - 12th September 1998},
  editor    = {Cheung, Edmund H. M.},
  address   = {Hong Kong},
  isbn      = {962-442-129-3},
  pages     = {259 -- 264},
  year      = {1998},
  language  = {en}
}
@article{XuLueMaetal.2005,
  author    = {Xu, Jung-Ming and L{\"u}, Min and Ma, Meijie and Hellwig, Angelika},
  title     = {Super connectivity of line graphs},
  series = {Information processing letters},
  volume    = {Vol. 94},
  journal   = {Information processing letters},
  number    = {Iss. 4},
  issn      = {1872-6119 (E-Journal); 0020-0190 (Print)},
  pages     = {191 -- 195},
  year      = {2005},
  language  = {en}
}
@article{WulfhorstDuweMerseburgetal.2016,
  author    = {Wulfhorst, Helene and Duwe, Anna-Maria and Merseburg, Johannes and Tippk{\"o}tter, Nils},
  title     = {Compositional analysis of pretreated (beech) wood using differential scanning calorimetry and multivariate data analysis},
  series = {Tetrahedron},
  volume    = {72},
  journal   = {Tetrahedron},
  number    = {46},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.tet.2016.04.029},
  pages     = {7329 -- 7334},
  year      = {2016},
  abstract  = {The composition of plant biomass varies depending on the feedstock and pre-treatment conditions and influences its processing in biorefineries. In order to ensure optimal process conditions, the quantitative proportion of the main polymeric components of the pre-treated biomass has to be determined. Current standard procedures for biomass compositional analysis are complex, the measurements are afflicted with errors and therefore often not comparable. Hence, new powerful analytical methods are urgently required to characterize biomass. In this contribution, Differential Scanning Calorimetry (DSC) was applied in combination with multivariate data analysis (MVA) to detect the cellulose content of the plant biomass pretreated by Liquid Hot Water (LHW) and Organosolv processes under various conditions. Unlike conventional techniques, the developed analytic method enables the accurate quantification of monosaccharide content of the plant biomass without any previous sample preparation. It is easy to handle and avoids errors in sample preparation.},
  language  = {en}
}
@inproceedings{WulfhorstDuweMoehringetal.2016,
  author    = {Wulfhorst, H. and Duwe, A. and M{\"o}hring, S. and Jurca, O. and Tippk{\"o}tter, Nils},
  title     = {Analysis of pretreated biomass by differential scanning 132 calorimetry and multivariate data analysis},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {132},
  year      = {2016},
  language  = {en}
}
@inproceedings{WuKemper2016,
  author    = {Wu, Ziyi and Kemper, Hans},
  title     = {The optimal 48 V - battery pack for a specific load profile of a heavy duty vehicle},
  series = {8. Internationale Fachtagung Kraftwerk Batterie : 26. - 27. April 2016, M{\"u}nster, Deutschland},
  booktitle = {8. Internationale Fachtagung Kraftwerk Batterie : 26. - 27. April 2016, M{\"u}nster, Deutschland},
  year      = {2016},
  language  = {en}
}
@inproceedings{WuPoghossianWerneretal.2013,
  author    = {Wu, Chunsheng and Poghossian, Arshak and Werner, Frederik and Bronder, Thomas and B{\"a}cker, Matthias and Wang, Ping and Sch{\"o}ning, Michael Josef},
  title     = {An application of a scanning light-addressable potentiometric sensor for label-free DNA detection},
  series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  organization    = {Dresdner Sensor-Symposium <11, 2013>},
  isbn      = {978-3-9813484-5-3},
  pages     = {164 -- 168},
  year      = {2013},
  language  = {en}
}
@article{WuPoghossianBronderetal.2016,
  author    = {Wu, Chunsheng and Poghossian, Arshak and Bronder, Thomas and Sch{\"o}ning, Michael Josef},
  title     = {Sensing of double-stranded DNA molecules by their intrinsic molecular charge using the light-addressable potentiometric sensor},
  series = {Sensors and Actuators B: Chemical},
  journal   = {Sensors and Actuators B: Chemical},
  number    = {229},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2016.02.004},
  pages     = {506 -- 512},
  year      = {2016},
  abstract  = {A multi-spot light-addressable potentiometric sensor (LAPS), which belongs to the family of semiconductor field-effect devices, was applied for label-free detection of double-stranded deoxyribonucleic acid (dsDNA) molecules by their intrinsic molecular charge. To reduce the distance between the DNA charge and sensor surface and thus, to enhance the electrostatic coupling between the dsDNA molecules and the LAPS, the negatively charged dsDNA molecules were electrostatically adsorbed onto the gate surface of the LAPS covered with a positively charged weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)). The surface potential changes in each spot of the LAPS, induced by the layer-by-layer adsorption of a PAH/dsDNA bilayer, were recorded by means of photocurrent-voltage and constant-photocurrent measurements. In addition, the surface morphology of the gate surface before and after consecutive electrostatic adsorption of PAH and dsDNA layers was studied by atomic force microscopy measurements. Moreover, fluorescence microscopy was used to verify the successful adsorption of dsDNA molecules onto the PAH-modified LAPS surface. A high sensor signal of 25 mV was registered after adsorption of 10 nM dsDNA molecules. The lower detection limit is down to 0.1 nM dsDNA. The obtained results demonstrate that the PAH-modified LAPS device provides a convenient and rapid platform for the direct label-free electrical detection of in-solution hybridized dsDNA molecules.},
  language  = {en}
}
@article{WuBronderPoghossianetal.2015,
  author    = {Wu, Chunsheng and Bronder, Thomas and Poghossian, Arshak and Werner, Frederik and Sch{\"o}ning, Michael Josef},
  title     = {Label-free detection of DNA using light-addressable potentiometric sensor modified with a positively charged polyelectrolyte layer},
  series = {Nanoscale},
  volume    = {14},
  journal   = {Nanoscale},
  number    = {7},
  publisher = {Royal Society of Chemistry (RSC)},
  address   = {Cambridge},
  doi       = {10.1039/C4NR07225A},
  pages     = {6143 -- 6150},
  year      = {2015},
  abstract  = {A multi-spot (16 spots) light-addressable potentiometric sensor (MLAPS) consisting of an Al-p-Si-SiO2 structure modified with a weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was applied for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization by the intrinsic molecular charge for the first time. To achieve a preferentially flat orientation of DNA strands and thus, to reduce the distance between the DNA charge and MLAPS surface, the negatively charged probe single-stranded DNAs (ssDNA) were electrostatically adsorbed onto the positively charged PAH layer using a simple layer-by-layer (LbL) technique. In this way, more DNA charge can be positioned within the Debye length, yielding a higher sensor signal. The surface potential changes in each spot induced due to the surface modification steps (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), non-specific adsorption of mismatched ssDNA) were determined from the shifts of photocurrent-voltage curves along the voltage axis. A high sensor signal of 83 mV was registered after immobilization of probe ssDNA onto the PAH layer. The hybridization signal increases from 5 mV to 32 mV with increasing the concentration of cDNA from 0.1 nM to 5 μM. In contrast, a small signal of 5 mV was recorded in the case of non-specific adsorption of fully mismatched ssDNA (5 μM). The obtained results demonstrate the potential of the MLAPS in combination with the simple and rapid LbL immobilization technique as a promising platform for the future development of multi-spot light-addressable label-free DNA chips with direct electrical readout.},
  language  = {en}
}
@article{WuBronderPoghossianetal.2014,
  author    = {Wu, Chunsheng and Bronder, Thomas and Poghossian, Arshak and Werner, Frederik and B{\"a}cker, Matthias and Sch{\"o}ning, Michael Josef},
  title     = {Label-free electrical detection of DNA with a multi-spot LAPS: First step towards light-addressable DNA chips},
  series = {Physica status solidi A : Applications and materials science},
  volume    = {211},
  journal   = {Physica status solidi A : Applications and materials science},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)},
  doi       = {10.1002/pssa.201330442},
  pages     = {1423 -- 1428},
  year      = {2014},
  abstract  = {A multi-spot (4 × 4 spots) light-addressable potentiometric sensor (MLAPS) consisting of an Al-p-Si-SiO2 structure has been applied for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization by the intrinsic molecular charge for the first time. Single-stranded probe ssDNA molecules (20 bases) were covalently immobilized onto the silanized SiO2 gate surface. The unspecific adsorption of mismatch ssDNA on the MLAPS gate surface was blocked by bovine serum albumin molecules. To reduce the screening effect and to achieve a high sensor signal, the measurements were performed in a low ionic-strength solution. The photocurrent-voltage (I-V) curves were simultaneously recorded on all 16 spots after each surface functionalization step. Large shifts of I-V curves of 25 mV were registered after the DNA immobilization and hybridization event. In contrast, a small potential shift (∼5 mV) was observed in case of mismatch ssDNA, revealing good specificity of the sensor. The obtained results demonstrate the potential of the MLAPS as promising transducer platform for the multi-spot label-free electrical detection of DNA molecules by their intrinsic molecular charge.},
  language  = {en}
}
@inproceedings{WuBronderPoghossianetal.2014,
  author    = {Wu, Chunsheng and Bronder, Thomas and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {D{\"u}sseldorf},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 4},
  year      = {2014},
  language  = {en}
}
@article{Wrede1996,
  author    = {Wrede, Oliver},
  title     = {Mnemotechnik in graphischen Benutzeroberfl{\"a}chen},
  series = {Form <Basel> / Form-Diskurs : Zeitschrift f{\"u}r Design und Theorie. 1 (1996), H. 2},
  journal   = {Form <Basel> / Form-Diskurs : Zeitschrift f{\"u}r Design und Theorie. 1 (1996), H. 2},
  year      = {1996},
  language  = {en}
}
@article{Wrede2016,
  author    = {Wrede, Oliver},
  title     = {Continuity in travel information},
  series = {Information Design Journal},
  volume    = {22},
  journal   = {Information Design Journal},
  number    = {2},
  publisher = {John Benjamins},
  address   = {Amsterdam},
  issn      = {0142-5471},
  doi       = {10.1075/idj.22.2.09wre},
  pages     = {172 -- 178},
  year      = {2016},
  abstract  = {This article discusses the contrast between the information transportation companies provide to travellers and that of their brand messaging. Companies' brand messaging often portrays the service they provide as pleasant, stress free and perfect. Customers and users of the service, on the other hand, often describe their experience of the service as a negative one. This article suggests that the brand value would be greater if transportation companies paid more attention to the users' experience when designing their information systems, particularly in worst case scenarios.},
  language  = {en}
}
@book{WosnitzaHilgers2012,
  author    = {Wosnitza, Franz and Hilgers, Hans Gerd},
  title     = {Energieeffizienz und Energiemanagement : ein {\"U}berblick heutiger M{\"o}glichkeiten und Notwendigkeiten},
  publisher = {Springer Spektrum},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-1941-3},
  pages     = {XVII, 548 S. : Ill., graph. Darst.},
  year      = {2012},
  language  = {en}
}
@inproceedings{WollertPlessmann1993,
  author    = {Wollert, J{\"o}rg and Plessmann, K. W.},
  title     = {Controlling processes by operating-point based hybride observers},
  series = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  booktitle = {EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies},
  publisher = {Verl. d. Augustinus Buchh.},
  address   = {Aachen},
  organization    = {EUFIT <1, 1993, Aachen>},
  isbn      = {3-86073-176-9},
  pages     = {1151 -- 1155},
  year      = {1993},
  language  = {en}
}
@inproceedings{Wollert2012,
  author    = {Wollert, J{\"o}rg},
  title     = {The performance of UWB-communication in an industrial environment},
  series = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  booktitle = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {International Symposium on Wireless Systems <1, 2012, Offenburg>},
  isbn      = {978-1-4673-4678-8},
  doi       = {10.1109/IDAACS-SWS.2012.6377639},
  pages     = {85 -- 90},
  year      = {2012},
  language  = {en}
}
@inproceedings{Wollert2015,
  author    = {Wollert, J{\"o}rg},
  title     = {Wireless systems for machinery safety : Requirements and solutions for wireless real time systems},
  series = {16th International Conference on Research and Education in Mechatronics (REM), 2015},
  booktitle = {16th International Conference on Research and Education in Mechatronics (REM), 2015},
  isbn      = {978-3-945728-01-7},
  doi       = {10.1109/REM.2015.7380377},
  pages     = {88 -- 91},
  year      = {2015},
  language  = {en}
}
@article{WollbrinkMasloZimmeretal.2020,
  author    = {Wollbrink, Moritz and Maslo, Semir and Zimmer, Daniel and Abbas, Karim and Arntz, Kristian and Bergs, Thomas},
  title     = {Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts},
  series = {Procedia CIRP},
  volume    = {93},
  journal   = {Procedia CIRP},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2020.04.015},
  pages     = {108 -- 113},
  year      = {2020},
  abstract  = {The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process.},
  language  = {en}
}
@article{WoliszSchuetzBlankeetal.2017,
  author    = {Wolisz, Henryk and Sch{\"u}tz, Thomas and Blanke, Tobias and Hagenkamp, Markus and Kohrn, Markus and Wesseling, Mark and M{\"u}ller, Dirk},
  title     = {Cost optimal sizing of smart buildings' energy system components considering changing end-consumer electricity markets},
  series = {Energy},
  volume    = {137},
  journal   = {Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.energy.2017.06.025},
  pages     = {715 -- 728},
  year      = {2017},
  language  = {en}
}
@incollection{WolffSeefeldtBaueretal.2014,
  author    = {Wolff, Nino and Seefeldt, Patric and Bauer, Wolfgang and Fiebig, Christopher and Gerding, Patrick and Parow-Souchon, Kai and Pongs, Anna and Reiffenrath, Matti and Ziemann, Thomas},
  title     = {Alternative application of solar sail technology},
  series = {Advances in solar sailing},
  booktitle = {Advances in solar sailing},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)},
  doi       = {10.1007/978-3-642-34907-2_23},
  pages     = {351 -- 365},
  year      = {2014},
  abstract  = {The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.},
  language  = {en}
}
@inproceedings{WolfWiese2013,
  author    = {Wolf, Martin and Wiese, Ute},
  title     = {A comparative transformation model for process changes using serious games},
  series = {2013 IEEE 2nd International Conference on Serious Games and Applications for Health (SeGAH): proceedings of a meeting held 2-3 May 2013, Algarve, Portugal},
  booktitle = {2013 IEEE 2nd International Conference on Serious Games and Applications for Health (SeGAH): proceedings of a meeting held 2-3 May 2013, Algarve, Portugal},
  publisher = {Institute of Electrical and Electronics Engineers (IEEE)},
  address   = {Piscataway, NJ},
  organization    = {International Conference on Serious Games and Applications for Health <2, 2013, Algarve>},
  isbn      = {978-1-4673-6164-4},
  doi       = {10.1109/SeGAH.2013.6665307},
  pages     = {64 -- 70},
  year      = {2013},
  language  = {en}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@article{WolfSchlickSpringer1997,
  author    = {Wolf, Martin and Schlick, Christopher and Springer, J.},
  title     = {The use of implicit communication mechanisms in desktop-teleconferencing-systems},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {193 -- 194},
  year      = {1997},
  language  = {en}
}
@article{WolfLuczakSpringeretal.1997,
  author    = {Wolf, Martin and Luczak, Holger and Springer, J. and Simon, S.},
  title     = {The role of metaphors in computer supported cooperative work},
  series = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  journal   = {Proceedings of WWDU '97 Tokyo, Fifth International Scientific Conference on Work with Display Units : November 3 - 5, 1997, Tokyo /},
  editor    = {Miyamoto, Hiroyuki},
  publisher = {-},
  address   = {Tokyo},
  pages     = {191 -- 192},
  year      = {1997},
  language  = {en}
}
@article{WolfLuczak1999,
  author    = {Wolf, Martin and Luczak, Holger},
  title     = {Computer Supported Communication and Cooperation - Making Information Aware / Luczak, H. ; Wolf, M.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {298 -- 302},
  year      = {1999},
  language  = {en}
}
@inproceedings{WolfLenz2015,
  author    = {Wolf, Martin and Lenz, Laura L.},
  title     = {The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)},
  series = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  booktitle = {IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16},
  publisher = {IEEE [u.a.]},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4799-4823-9},
  doi       = {10.1109/SeGAH.2014.7067089},
  pages     = {135 -- 142},
  year      = {2015},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Empirical Investigation of a workspace model for Chemical engineers / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger},
  series = {Proceedings of the Human Factors and Ergonomics Society Annual Meeting July 2000. 44 (2000), H. 6},
  journal   = {Proceedings of the Human Factors and Ergonomics Society Annual Meeting July 2000. 44 (2000), H. 6},
  publisher = {-},
  pages     = {612 -- 615},
  year      = {2000},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2002,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Development and evaluation of a groupware system to support chemical design processes / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger},
  series = {International Journal of Human-Computer Interaction . 14 (2002), H. 2},
  journal   = {International Journal of Human-Computer Interaction . 14 (2002), H. 2},
  publisher = {-},
  isbn      = {1044-7318},
  pages     = {181 -- 198},
  year      = {2002},
  language  = {en}
}
@article{WolfFoltzSchlicketal.1999,
  author    = {Wolf, Martin and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Groupware support for chemical process design / Wolf, M.; Foltz, C.; Schlick, C.; Luczak, H.},
  series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  journal   = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999},
  publisher = {Erlbaum},
  address   = {Mahwah, NJ},
  pages     = {343 -- 347},
  year      = {1999},
  language  = {en}
}
@article{WolfFoltzKillichetal.2001,
  author    = {Wolf, Martin and Foltz, Christian and Killich, Stephan and Schmidt, Ludger},
  title     = {Task and Information Modeling for Cooperative Work / Foltz, Christian ; Killich, Stephan ; Wolf, Martin ; Schmidt, Ludger ; Luczak, Holger},
  series = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  journal   = {Systems, social and internationalization design aspects of human-computer interaction / ed. by Michael J. Smith, Gavriel Salvendy Vol. 2},
  publisher = {-},
  isbn      = {0-8058-3608-X},
  pages     = {172 -- 176},
  year      = {2001},
  language  = {en}
}
@book{WolfFoltzKillich2000,
  author    = {Wolf, Martin and Foltz, Christian and Killich, S.},
  title     = {K3 User Guide},
  publisher = {RWTH},
  address   = {Aachen},
  pages     = {1 -- 13},
  year      = {2000},
  language  = {en}
}
@article{Wolf2000,
  author    = {Wolf, Martin},
  title     = {Groupware related task design},
  series = {ACM SIGGROUP Bulletin. 21 (2000), H. 2},
  journal   = {ACM SIGGROUP Bulletin. 21 (2000), H. 2},
  publisher = {-},
  pages     = {5 -- 8},
  year      = {2000},
  language  = {en}
}
@article{Wolf2000,
  author    = {Wolf, Martin},
  title     = {Groupware related task design},
  series = {ACM SIGGROUP Bulletin},
  volume    = {21},
  journal   = {ACM SIGGROUP Bulletin},
  number    = {2},
  issn      = {2372-7403},
  doi       = {10.1145/605660.605662},
  pages     = {5 -- 8},
  year      = {2000},
  abstract  = {his report summarizes the results of a workshop on Groupware related task design which took place at the International Conference on Supporting Group Work Group'99, Arizona, from 14 th to 17 th November 1999. The workshop was addressed to people from different viewpoints, backgrounds, and domains: - Researchers dealing with questions of task analysis and task modeling for Groupware application from an academic point of view. They may contribute modelbased design approaches or theoretically oriented work - Practitioners with experience in the design and everyday use of groupware systems. They might refer to the practical side of the topic: "real" tasks, "real" problems, "real" users, etc.},
  language  = {en}
}
@incollection{WolfKapelyukhScheeretal.2015,
  author    = {Wolf, C. Roland and Kapelyukh, Yury and Scheer, Nico and Henderson, Colin J.},
  title     = {Application of Humanised and Other Transgenic Models to Predict Human Responses to Drugs},
  editor    = {Wilson, Alan G. E.},
  publisher = {RSC Publ.},
  address   = {Cambridge},
  isbn      = {978-1-78262-778-4},
  doi       = {10.1039/9781782622376-00152},
  pages     = {152 -- 176},
  year      = {2015},
  abstract  = {The use of transgenic animal models has transformed our knowledge of complex biochemical pathways in vivo. It has allowed disease processes to be modelled and used in the development of new disease prevention and treatment strategies. They can also be used to define cell- and tissue-specific pathways of gene regulation. A further major application is in the area of preclinical development where such models can be used to define pathways of chemical toxicity, and the pathways that regulate drug disposition. One major application of this approach is the humanisation of mice for the proteins that control drug metabolism and disposition. Such models can have numerous applications in the development of drugs and in their more sophisticated use in the clinic.},
  language  = {en}
}
@article{WittmannUlamecFeuerbacheretal.1997,
  author    = {Wittmann, Klaus and Ulamec, S. and Feuerbacher, B. and Rosenbauer, H. (u.a.)},
  title     = {Rosetta Lander - In Situ Investigation of a Cometary Nucleus},
  series = {Lunar and Planetary Science. 28 (1997)},
  journal   = {Lunar and Planetary Science. 28 (1997)},
  isbn      = {0270-9511},
  pages     = {1461 -- 1462},
  year      = {1997},
  language  = {en}
}
@article{WittmannUlamecFeuerbacheretal.1995,
  author    = {Wittmann, Klaus and Ulamec, S. and Feuerbacher, B. and Rosenbauer, H.},
  title     = {Technical Challenge, Scientific Thrill: A Long Term Lander on an Active Comet},
  series = {Lunar and Planetary Science. 26 (1995)},
  journal   = {Lunar and Planetary Science. 26 (1995)},
  isbn      = {0270-9511},
  pages     = {1431 -- 1432},
  year      = {1995},
  language  = {en}
}
@article{WittmannUlamecRichter1999,
  author    = {Wittmann, Klaus and Ulamec, S and Richter, L},
  title     = {Lander Systems for Planetary Missions},
  series = {Laboratory astrophysics and space research / ed. by P. Ehrenfreund},
  journal   = {Laboratory astrophysics and space research / ed. by P. Ehrenfreund},
  publisher = {Kluwer},
  address   = {Dordrecht [u.a.]},
  isbn      = {0-7923-5338-2},
  pages     = {597 -- 621},
  year      = {1999},
  language  = {en}
}
@article{WittmannSchmidtPadekenetal.1988,
  author    = {Wittmann, Klaus and Schmidt, H. P. and Padeken, D. and Hildmann, B.},
  title     = {The Microgravity User Support Centre (MUSC)},
  series = {ESA SP. 277 (1988)},
  journal   = {ESA SP. 277 (1988)},
  isbn      = {0379-6566},
  pages     = {525},
  year      = {1988},
  language  = {en}
}
@article{WittmannSchmidtFeuerbacher1988,
  author    = {Wittmann, Klaus and Schmidt, H. P. and Feuerbacher, B.},
  title     = {Microgravity research and user support in the Space Station era: The Microgravity User Support Centre},
  series = {Acta Astronautica. 17 (1988), H. 11-12},
  journal   = {Acta Astronautica. 17 (1988), H. 11-12},
  isbn      = {0094-5765},
  pages     = {1161 -- 1168},
  year      = {1988},
  language  = {en}
}
@article{WittmannPadeken1993,
  author    = {Wittmann, Klaus and Padeken, D.},
  title     = {The User Center for Microgravity MUSC - Support for space experiments},
  series = {DLR-Nachrichten. 70 (1993)},
  journal   = {DLR-Nachrichten. 70 (1993)},
  isbn      = {0937-0420},
  pages     = {19 -- 24},
  year      = {1993},
  language  = {en}
}
@article{WittmannKellWinkleretal.1998,
  author    = {Wittmann, Klaus and Kell, G. and Winkler, F. and G{\"u}nther, M. (u.a.)},
  title     = {High resolution temperature measurement technique for materials sciences experiments in space},
  series = {Acta Astronautica. 43 (1998), H. 7-8},
  journal   = {Acta Astronautica. 43 (1998), H. 7-8},
  isbn      = {0094-5765},
  pages     = {385 -- 395},
  year      = {1998},
  language  = {en}
}
@article{WittmannKehrWillnecker2000,
  author    = {Wittmann, Klaus and Kehr, J. and Willnecker, R.},
  title     = {Decentralized Payload Operations Concept for Columbus},
  year      = {2000},
  language  = {en}
}
@article{WittmannGillessenOttoetal.1996,
  author    = {Wittmann, Klaus and Gillessen, F. and Otto, G. and R{\"o}stel, R.},
  title     = {Undercooling and solidification of metallic melts suspended in a non-nucleating matrix: Experiment NUCAL of the German Spacelab Mission D-2},
  series = {Acta Astronautica. 38 (1996), H. 1},
  journal   = {Acta Astronautica. 38 (1996), H. 1},
  isbn      = {0094-5765},
  pages     = {63 -- 68},
  year      = {1996},
  language  = {en}
}