@article{SchwabHojdisLacayoetal.2016,
  author    = {Schwab, Lukas and Hojdis, Nils and Lacayo, Jorge and Wilhelm, Manfred},
  title     = {Fourier-Transform Rheology of Unvulcanized, Carbon Black Filled Styrene Butadiene Rubber},
  series = {Macromolecular Materials and Engineering},
  volume    = {301},
  journal   = {Macromolecular Materials and Engineering},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1439-2054},
  doi       = {10.1002/mame.201500356},
  pages     = {457 -- 468},
  year      = {2016},
  abstract  = {Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ0 < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ0 = 0.32). The addition of up to 70 phr CB leads to an increase of I3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I3/1 is pronounced for CB levels above the percolation threshold.},
  language  = {en}
}
@inproceedings{SchusserVaessenSchoening2011,
  author    = {Schusser, Sebastian and Vaeßen, Christiane and Sch{\"o}ning, Michael Josef},
  title     = {4. Graduiertentagung der FH Aachen 24. November 2011},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-3530},
  year      = {2011},
  abstract  = {Tagungsband der 4. Graduiertentagung der FH Aachen am 24. November 2011 Proceedings from the 4th Graduate Symposium, FH Aachen, Germany, November 24th, 2011 Aachen, November 2011. 62 Seiten},
  subject      = {Graduiertentagung},
  language  = {de}
}
@inproceedings{SchusserVaessenSchoening2012,
  author    = {Schusser, Sebastian and Vaeßen, Christiane and Sch{\"o}ning, Michael Josef},
  title     = {5. Graduiertentagung der FH Aachen 15. November 2012},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-50425},
  pages     = {52},
  year      = {2012},
  abstract  = {Tagungsband der 5. Graduiertentagung der FH Aachen am 15. November 2012},
  language  = {de}
}
@article{SchusserPoghossianBaeckeretal.2012,
  author    = {Schusser, Sebastian and Poghossian, Arshak and B{\"a}cker, Matthias and Leinhos, Marcel and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Characterization of biodegradable polymers with capacitive field-effect sensors},
  series = {Sensors and actuators B: Chemical},
  volume    = {187},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2012.07.099},
  pages     = {2 -- 7},
  year      = {2012},
  abstract  = {In vitro studies of the degradation kinetic of biopolymers are essential for the design and optimization of implantable biomedical devices. In the presented work, a field-effect capacitive sensor has been applied for the real-time and in situ monitoring of degradation processes of biopolymers for the first time. The polymer-covered field-effect sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. The feasibility of this approach has been experimentally proven by using the commercially available biomedical polymer poly(D,L-lactic acid) (PDLLA) as a model system. PDLLA films of different thicknesses were deposited on the Ta₂O₅-gate surface of the field-effect structure from a polymer solution by means of spin-coating method. The polymer-modified field-effect sensors have been characterized by means of capacitance-voltage and impedance-spectroscopy method. The degradation of the PDLLA was accelerated by changing the degradation medium from neutral (pH 7.2) to alkaline (pH 9) condition, resulting in drastic changes in the capacitance and impedance spectra of the polymer-modified field-effect sensor.},
  language  = {en}
}
@article{SchusserPoghossianBaeckeretal.2015,
  author    = {Schusser, Sebastian and Poghossian, Arshak and B{\"a}cker, Matthias and Krischer, M. and Leinhos, Marcel and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {An application of field-effect sensors for in-situ monitoring of degradation of biopolymers},
  series = {Sensors and actuators B: Chemical},
  volume    = {207, Part B},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.10.058},
  pages     = {954 -- 959},
  year      = {2015},
  abstract  = {The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte-insulator-semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al-p-Si-SiO2-Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).},
  language  = {en}
}
@article{SchusserMenzelBaeckeretal.2013,
  author    = {Schusser, Sebastian and Menzel, S. and B{\"a}cker, Matthias and Leinhos, Marcel and Poghossian, Arshak and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Degradation of thin poly(lactic acid) films: characterization by capacitance-voltage, atomic force microscopy, scanning electron microscopy and contact-angle measurements},
  series = {Electrochimica Acta},
  volume    = {Vol. 113},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3859 (E-Journal); 0013-4686 (Print)},
  pages     = {779 -- 784},
  year      = {2013},
  language  = {en}
}
@inproceedings{SchusserLeinhosPoghossianetal.2012,
  author    = {Schusser, Sebastian and Leinhos, Marcel and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Biopolymer-degradation monitoring by chip-­based impedance spectroscopy technique},
  series = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  booktitle = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012},
  editor    = {Abdelghani, Adnane and Sch{\"o}ning, Michael Josef},
  pages     = {47 -- 47},
  year      = {2012},
  language  = {en}
}
@article{SchusserLeinhosBaeckeretal.2013,
  author    = {Schusser, Sebastian and Leinhos, Marcel and B{\"a}cker, Matthias and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Impedance spectroscopy: A tool for real-time in situ monitoring of the degradation of biopolymers},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1521-396X ; 0031-8965},
  doi       = {10.1002/pssa.201200941},
  pages     = {905 -- 910},
  year      = {2013},
  abstract  = {Investigation of the degradation kinetics of biodegradable polymers is essential for the development of implantable biomedical devices with predicted biodegradability. In this work, an impedimetric sensor has been applied for real-time and in situ monitoring of degradation processes of biopolymers. The sensor consists of two platinum thin-film electrodes covered by a polymer film to be studied. The benchmark biomedical polymer poly(D,L-lactic acid) (PDLLA) was used as a model system. PDLLA films were deposited on the sensor structure from a polymer solution by using the spin-coating method. The degradation kinetics of PDLLA films have been studied in alkaline solutions of pH 9 and 12 by means of an impedance spectroscopy (IS) method. Any changes in a polymer capacitance/resistance induced by water uptake and/or polymer degradation will modulate the global impedance of the polymer-covered sensor that can be used as an indicator of the polymer degradation. The degradation rate can be evaluated from the time-dependent impedance spectra. As expected, a faster degradation has been observed for PDLLA films exposed to pH 12 solution.},
  language  = {en}
}
@article{SchusserKrischerBaeckeretal.2015,
  author    = {Schusser, Sebastian and Krischer, Maximillian and B{\"a}cker, Matthias and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors},
  series = {Analytical Chemistry},
  volume    = {87},
  journal   = {Analytical Chemistry},
  number    = {13},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-6882},
  doi       = {10.1021/acs.analchem.5b00617},
  pages     = {6607 -- 6613},
  year      = {2015},
  abstract  = {Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte-insulator-semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.},
  language  = {en}
}
@article{SchusserKrischerMolinetal.2015,
  author    = {Schusser, Sebastian and Krischer, M. and Molin, D. G. M. and Akker, N. M. S. van den and B{\"a}cker, Matthias and Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.815},
  pages     = {948 -- 951},
  year      = {2015},
  abstract  = {A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.},
  language  = {en}
}
@inproceedings{SchusserBaeckerLeinhosetal.2013,
  author    = {Schusser, Sebastian and B{\"a}cker, Matthias and Leinhos, Marcel and Krischer, M. and Wenzel, L. and Poghossian, Arshak and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Sensorkonzept zur in vitro Echtzeitmessung des Degradationsverhaltens von biodegradierbaren Biopolymeren},
  series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  organization    = {Dresdner Sensor-Symposium <11, 2013>},
  isbn      = {978-3-9813484-5-3},
  pages     = {174 -- 177},
  year      = {2013},
  language  = {de}
}
@article{SchusserBaeckerKrischeretal.2014,
  author    = {Schusser, Sebastian and B{\"a}cker, Matthias and Krischer, M. and Wenzel, L. and Leinhos, Marcel and Poghossian, Arshak and Biselli, Manfred and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Enzymatically catalyzed degradation of biodegradable polymers investigated by means of a semiconductor-based field-effect sensor},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.689},
  pages     = {1314 -- 1317},
  year      = {2014},
  abstract  = {A semiconductor field-effect device has been used for an enzymatically catalyzed degradation of biopolymers for the first time. This novel technique is capable to monitor the degradation process of multiple samples in situ and in real-time. As model system, the degradation of the biopolymer poly(D, L-lactic acid) has been monitored in the degradation medium containing the enzyme lipase from Rhizomucor miehei. The obtained results demonstrate the potential of capacitive field-effect sensors for degradation studies of biodegradable polymers.},
  language  = {en}
}
@phdthesis{Schusser2015,
  author    = {Schusser, Sebastian},
  title     = {Sensor-based degradation monitoring for the evaluation of (bio)degradable polymers},
  publisher = {Universiteit Hasselt ; FH Aachen},
  address   = {Hasselt ; Aachen},
  pages     = {145 Seiten},
  year      = {2015},
  language  = {en}
}
@article{SchumannRoginSchneideretal.2015,
  author    = {Schumann, Christiane and Rogin, Sabine and Schneider, Horst and Tippk{\"o}tter, Nils and Oster, J{\"u}rgen and Kampeis, Percy},
  title     = {Simultane Atline-Quantifizierung von Magnetpartikeln und Mikroorganismen bei einer HGMS-Filtration},
  series = {Chemie Ingenieur Technik},
  volume    = {87},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  doi       = {10.1002/cite.201300158},
  pages     = {137 -- 149},
  year      = {2015},
  abstract  = {Es wird eine neue Atline-Messmethode vorgestellt, mit der w{\"a}hrend einer Hochgradienten-Magnetseparation (HGMS)-Filtration eine simultane Quantifizierung von Magnetpartikeln und Mikroorganismen im Filtrat vorgenommen werden kann. Dabei gelingt die Quantifizierung signifikant besser als mit bisher verwendeten Messmethoden. Mit dieser Methode ist es m{\"o}glich, die Trennleistung einer HGMS-Filtration zu bestimmen und einen Filterdurchbruch durch Konzentrationsanstiege im Bereich einiger µg L-1 von Magnetpartikeln im Filtrat fr{\"u}hzeitig zu detektieren, ohne dass nennenswerte Partikelmengen verloren gehen.},
  language  = {de}
}
@misc{SchumannRoginSchneideretal.2012,
  author    = {Schumann, C. and Rogin, S. and Schneider, H. and Oster, J. and Tippk{\"o}tter, Nils and Kampeis, P.},
  title     = {Steuerung von HGMS-Prozessen mittels Durchflusszytometrie},
  series = {Chemie Ingenieur Technik},
  volume    = {84},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201250125},
  pages     = {1370},
  year      = {2012},
  abstract  = {Die Hochgradientenmagnetseparation (HGMS) ist eine Methode zur Aufreinigung von biopharmazeutischen Produkten. Mit dieser Methode l{\"a}sst sich in nur einem Schritt eine Fest/Fest/Fl{\"u}ssig-Trennung erzielen, was zu einer erheblichen Zeit- und Kostenersparnis im Downstreaming f{\"u}hrt. Dennoch steht ihr industrieller Einsatz noch aus, was u. a. am Mangel an Analysenmethoden liegt, um die HGMS quantifizierbar zu machen. Gerade in der Pharmaproduktion werden Prozesse gebraucht, die gem{\"a}ß den einschl{\"a}gigen Vorschriften (cGMP) validiert und deren verfahrenstechnische Anlagenteile qualifiziert werden k{\"o}nnen. Die Schwierigkeit ist die Messung der magnetischen Mikrosorbentien in der Suspension, in der auch Zellen oder Zelltr{\"u}mmer vorliegen. Im Rahmen eines Forschungsprojektes im „Zentralen Innovationsprogramm Mittelstand" des BMWi wurden verschiedene Analysenmethoden untersucht. Die Durchflusszytometrie erm{\"o}glicht eine Charakterisierung von Partikeln und eine simultane quantitative Messung. Durch die multiparametrige Messung kann zwischen Zellen, Zelltr{\"u}mmern und Magnetpartikeln unterschieden werden. Die At-line-Einbindung des Durchflusszytometers ist durch den Einsatz einer externen Pumpe m{\"o}glich. {\"U}ber eine automatisierte Messwertanalyse kann der HGMS-Prozess mittels der Durchflusszytometrie gesteuert werden.},
  language  = {de}
}
@incollection{SchumacherSchwarzerStukenbrocketal.2009,
  author    = {Schumacher, Werner and Schwarzer, Klemens and Stukenbrock, Philipp and Rodriguez, Nadia},
  title     = {Entwicklung und Anwendungsgebiete solarthermischer Kraftwerke - Betriebsweise und Systemvarianten},
  series = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  booktitle = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  publisher = {Thom{\´e}-Kozmiensky Verlag},
  address   = {Neuruppin},
  isbn      = {978-3-935317-43-6},
  pages     = {401 -- 434},
  year      = {2009},
  language  = {de}
}
@inproceedings{SchulzeBuxlohGrossUlbrich2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz and Ulbrich, Michelle},
  title     = {Digital planning using building information modelling and virtual reality: new approach for students' remote practical training under lockdown conditions in the course of smart building engineering},
  series = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  booktitle = {Proceedings of International Conference on Education in Mathematics, Science and Technology 2021},
  publisher = {ISTES Organization},
  address   = {San Antonio, TX},
  isbn      = {978-1-952092-17-6},
  pages     = {118 -- 123},
  year      = {2021},
  abstract  = {The worldwide Corona pandemic has severely restricted student projects in the higher semesters of engineering courses. In order not to delay the graduation, a new concept had to be developed for projects under lockdown conditions. Therefore, unused rooms at the university should be digitally recorded in order to develop a new usage concept as laboratory rooms. An inventory of the actual state of the rooms was done first by taking photos and listing up all flaws and peculiarities. After that, a digital site measuring was done with a 360° laser scanner and these recorded scans were linked to a coherent point cloud and transferred to a software for planning technical building services and supporting Building Information Modelling (BIM). In order to better illustrate the difference between the actual and target state, two virtual reality models were created for realistic demonstration. During the project, the students had to go through the entire digital planning phases. Technical specifications had to be complied with, as well as documentation, time planning and cost estimate. This project turned out to be an excellent alternative to on-site practical training under lockdown conditions and increased the students' motivation to deal with complex technical questions.},
  language  = {en}
}
@misc{SchulzeBuxlohGrossCheng2020,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz and Cheng, Kevin Toni},
  title     = {Development and manufacturing of an interactive three-dimensional phase diagram of carbon dioxide for teaching sessions in thermodynamics},
  series = {Proceedings of the International Conference The Future of Education 2020},
  journal   = {Proceedings of the International Conference The Future of Education 2020},
  year      = {2020},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions},
  series = {New Perspectives in Science Education - International Conference},
  booktitle = {New Perspectives in Science Education - International Conference},
  publisher = {Filodiritto},
  address   = {Bologna},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future.},
  language  = {en}
}
@inproceedings{SchulzeBuxlohGross2021,
  author    = {Schulze-Buxloh, Lina and Groß, Rolf Fritz},
  title     = {Miniature urban farming plant: a complex educational "Toy" for engineering students},
  series = {The Future of Education 11th Edition 2021},
  booktitle = {The Future of Education 11th Edition 2021},
  pages     = {4 Seiten},
  year      = {2021},
  abstract  = {Urban farming is an innovative and sustainable way of food production and is becoming more and more important in smart city and quarter concepts. It also enables the production of certain foods in places where they usually dare not produced, such as production of fish or shrimps in large cities far away from the coast. Unfortunately, it is not always possible to show students such concepts and systems in real life as part of courses: visits of such industry plants are sometimes not possible because of distance or are permitted by the operator for hygienic reasons. In order to give the students the opportunity of getting into contact with such an urban farming system and its complex operation, an industrial urban farming plant was set up on a significantly smaller scale. Therefore, all needed technical components like water aeriation, biological and mechanical filtration or water circulation have been replaced either by aquarium components or by self-designed parts also using a 3D-printer. Students from different courses like mechanical engineering, smart building engineering, biology, electrical engineering, automation technology and civil engineering were involved in this project. This "miniature industrial plant" was also able to start operation and has now been running for two years successfully. Due to Corona pandemic, home office and remote online lectures, the automation of this miniature plant should be brought to a higher level in future for providing a good control over the system and water quality remotely. The aim of giving the student a chance to get to know the operation of an urban farming plant was very well achieved and the students had lots of fun in "playing" and learning with it in a realistic way.},
  language  = {en}
}
@misc{SchulzezurWiescheOttoKleenetal.2005,
  author    = {Schulze zur Wiesche, Erik and Otto, Ralf and Kleen, Astrid and Hollenberg, Detlef and S{\"a}ttler, Andrea and Siegert, Petra and Boßmann, Britta},
  title     = {Verfahren zur dauerhaften Ausr{\"u}stung keratinischer Fasern mit Pflegewirkstoffen durch Carboxylesterhydrolasen [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {1 -- 13},
  year      = {2005},
  language  = {de}
}
@inproceedings{SchulzeMuehleisenFeyerl2018,
  author    = {Schulze, Sven and M{\"u}hleisen, M. and Feyerl, G{\"u}nter},
  title     = {Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology},
  series = {18. Internationales Stuttgarter Symposium. Proceedings},
  booktitle = {18. Internationales Stuttgarter Symposium. Proceedings},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-21194-3},
  pages     = {75 -- 89},
  year      = {2018},
  language  = {en}
}
@article{SchulzeFeyerlPischinger2023,
  author    = {Schulze, Sven and Feyerl, G{\"u}nter and Pischinger, Stefan},
  title     = {Advanced ECMS for hybrid electric heavy-duty trucks with predictive battery discharge and adaptive operating strategy under real driving conditions},
  series = {Energies},
  volume    = {16},
  journal   = {Energies},
  number    = {13},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en16135171},
  pages     = {29 Seiten, Art. Nr.: 5171},
  year      = {2023},
  abstract  = {To fulfil the CO2 emission reduction targets of the European Union (EU), heavy-duty (HD) trucks need to operate 15\% more efficiently by 2025 and 30\% by 2030. Their electrification is necessary as conventional HD trucks are already optimized for the long-haul application. The resulting hybrid electric vehicle (HEV) truck gains most of the fuel saving potential by the recuperation of potential energy and its consecutive utilization. The key to utilizing the full potential of HEV-HD trucks is to maximize the amount of recuperated energy and ensure its intelligent usage while keeping the operating point of the internal combustion engine as efficient as possible. To achieve this goal, an intelligent energy management strategy (EMS) based on ECMS is developed for a parallel HEV-HD truck which uses predictive discharge of the battery and adaptive operating strategy regarding the height profile and the vehicle mass. The presented EMS can reproduce the global optimal operating strategy over long phases and lead to a fuel saving potential of up to 2\% compared with a heuristic strategy. Furthermore, the fuel saving potential is correlated with the investigated boundary conditions to deepen the understanding of the impact of intelligent EMS for HEV-HD trucks.},
  language  = {en}
}
@masterthesis{Schulze2021,
  type      = {Bachelor Thesis},
  author    = {Schulze, Lasse},
  title     = {SCHRECKLICHES : Eine Comic-Antholologie {\"u}ber allt{\"a}gliche {\"A}ngste},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {55 Seiten},
  year      = {2021},
  abstract  = {{\"A}ngste und Phobien sind vielseitig. Furcht im Alltag spiegelt sich sowohl in spezifischen Objekten als auch in allgemeinen Situationen wider. F{\"u}r unbetroffene Menschen sind diese Emotionen oft unbegreiflich, irrational und abstrakt. In 15 Bildergeschichten werden verschiedene pers{\"o}nliche {\"A}ngste humoristisch illustriert und in einer gebundenen Comic-Anthologie zusammengef{\"u}hrt. Der {\"u}berzogene, bizarre Zeichenstil demonstriert die empfundene Wahrnehmung bei allt{\"a}glichen {\"A}ngsten auf eine nicht allzu ernst gemeinte Weise. Zeichnerische {\"A}sthetik, von klassischem Comic-Stil bis zum grafischen Horror, und Storytelling stehen hier im Vordergrund. Lesende finden sich selbst in den absurden Geschichten wieder und werden im besten Fall zum Lachen gebracht. Die Bachelorarbeit SCHRECKLICHES versucht das abstrakte Gef{\"u}hl der Angst auf nachvollziehbare Art zeichnerisch und mit einer guten Portion {\"U}bertreibung zu vermitteln.},
  language  = {de}
}
@masterthesis{Schultheis2021,
  type      = {Bachelor Thesis},
  author    = {Schultheis, Anna Laura},
  title     = {EmanziPardon: Sind die Aussagen von Simone de Beauvoir aus ‚Das andere Geschlecht' heute noch relevant?},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {81 Seiten},
  year      = {2021},
  abstract  = {Simone de Beauvoir ver{\"o}ffentlichte 1949 ihr Werk ‚Das andere Geschlecht', in welchem sie die subjektiven und objektiven Einschr{\"a}nkungen, Belastungen und die Abh{\"a}ngigkeiten vom Mann darlegt, denen Frauen schon seit tausenden Jahren ausgesetzt waren und sind. Aber wie ist das heute? Sind diese Aussagen {\"u}berhaupt noch aktuell bzw. relevant? Innerhalb der Publikation werden Kernthesen aber auch Textausschnitte aus ihrem Werk aufgef{\"u}hrt sowie aktuelle Artikel, die sich mit der derzeitigen Lage befassen. Durch das gestalterische Konzept innerhalb der Publikation, haben die Lesenden die M{\"o}glichkeit, sich konkret mit genau den Themen zu befassen, die jeweils dem pers{\"o}nlichen Interesse entsprechen. Die Publikation dient als Erinnerung und als Nachschlagewerk, um immer wieder lesen k{\"o}nnen, welche K{\"a}mpfe hinsichtlich der Gleichstellung der Geschlechter bereits gek{\"a}mpft wurden und welche noch gek{\"a}mpft werden m{\"u}ssen.},
  language  = {de}
}
@article{SchulteZurhausenPoznanska1994,
  author    = {Schulte-Zurhausen, Manfred and Poznanska, K.},
  title     = {Kryteria klasyfikacji malych i srednich przedsiebiorstw = Kriterien zur Klassifizierung von kleinen und mittleren Unternehmen},
  series = {Przeglad Organizacji (1994)},
  journal   = {Przeglad Organizacji (1994)},
  pages     = {24 -- 27},
  year      = {1994},
  language  = {en}
}
@article{SchulteZurhausenPiegrzyk1995,
  author    = {Schulte-Zurhausen, Manfred and Piegrzyk, I.},
  title     = {Deutsch-polnische Joint-Ventures - eine Bestandsaufnahme},
  series = {Beschaffung aktuell (1995)},
  journal   = {Beschaffung aktuell (1995)},
  pages     = {50 -- 51},
  year      = {1995},
  language  = {de}
}
@article{SchulteZurhausen1995,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Automatisierte Kommunikation bei Verbundproduktion},
  series = {CIM-Management (1995)},
  journal   = {CIM-Management (1995)},
  pages     = {59 -- 63},
  year      = {1995},
  language  = {de}
}
@book{SchulteZurhausen2005,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Organisation. - 4., {\"u}berarb. und erw. Aufl.},
  publisher = {Vahlen},
  address   = {M{\"u}nchen},
  isbn      = {3-8006-3205-5},
  pages     = {XVI, 620 S. : graph. Darst.},
  year      = {2005},
  language  = {de}
}
@article{SchulteZurhausen1995,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Zwischenbetriebliche Kommunikation (EDI)},
  series = {Kleines Lexikon der Informatik und Wirtschaftsinformatik},
  journal   = {Kleines Lexikon der Informatik und Wirtschaftsinformatik},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-486-22907-9},
  pages     = {309 -- 311},
  year      = {1995},
  language  = {de}
}
@article{SchulteZurhausen2001,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Schnittstelle Marketing und Organisation},
  series = {Organisationsgestaltung in marktorientierten Unternehmen},
  journal   = {Organisationsgestaltung in marktorientierten Unternehmen},
  publisher = {Sauer},
  address   = {Heidelberg},
  isbn      = {3-7938-7240-8},
  pages     = {17 -- 47},
  year      = {2001},
  language  = {de}
}
@article{SchulteZurhausen2000,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Projektantrags- und -bewertungsverfahren im Unternehmen : Ablauf, Beteiligte und Entscheidungskriterien},
  series = {Betriebs- und Arbeitsorganisation im Wandel der Zeit},
  journal   = {Betriebs- und Arbeitsorganisation im Wandel der Zeit},
  publisher = {T{\"U}V-Verl.},
  address   = {K{\"o}ln},
  isbn      = {3-8249-0603-1},
  pages     = {101 -- 114},
  year      = {2000},
  language  = {de}
}
@article{SchulteZurhausen2000,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Die Anwendung des Systemdenkens im Organisationsmanagement},
  series = {Personalf{\"u}hrung und Organisation},
  journal   = {Personalf{\"u}hrung und Organisation},
  publisher = {Vahlen},
  address   = {M{\"u}nchen},
  isbn      = {3-8006-2451-6},
  pages     = {75 -- 90},
  year      = {2000},
  language  = {de}
}
@article{SchulteZurhausen1997,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {[Mehrere Beitr{\"a}ge]},
  series = {Lexikon Informatik und Datenverarbeitung},
  journal   = {Lexikon Informatik und Datenverarbeitung},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen [u.a.]},
  isbn      = {3-486-22875-7},
  year      = {1997},
  language  = {de}
}
@article{SchulteZurhausen1994,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Integration und unternehmensinterne Verteilung von EDI-Daten},
  series = {Wirtschaftsinformatik (1994)},
  journal   = {Wirtschaftsinformatik (1994)},
  pages     = {57 -- 65},
  year      = {1994},
  language  = {de}
}
@book{SchulteZurhausen1982,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Planung von Blocklagersystemen},
  publisher = {Beuth},
  address   = {Berlin [u.a.]},
  pages     = {151 S : graph. Darst.},
  year      = {1982},
  language  = {de}
}
@book{SchulteZurhausen2010,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Organisation / 5., {\"u}berarb. und aktualisierte Aufl.},
  publisher = {Vahlen},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8006-3736-2},
  pages     = {XVI, 639 S. : graph. Darst.},
  year      = {2010},
  language  = {de}
}
@book{SchulteZurhausen2014,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Organisation},
  edition   = {6., {\"u}berarb. und aktualisierte Aufl.},
  publisher = {Vahlen},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8006-4689-0},
  pages     = {XVI, 687 S. : graph. Darst.},
  year      = {2014},
  language  = {de}
}
@incollection{SchulteZurhausen2016,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Systemisches Management von Organisationsprojekten},
  series = {Projekte systemisch managen! Wie Sie soziale und rationale Prozesse in Projekten achtsam steuern},
  booktitle = {Projekte systemisch managen! Wie Sie soziale und rationale Prozesse in Projekten achtsam steuern},
  editor    = {Stelzer-Rothe, Thomas},
  publisher = {BWV Berliner Wissenschafts-Verlag},
  address   = {Berlin},
  isbn      = {978-3-8305-3647-5},
  pages     = {9 -- 34},
  year      = {2016},
  language  = {de}
}
@inproceedings{SchulteTiggesMatheisRekeetal.2023,
  author    = {Schulte-Tigges, Joschua and Matheis, Dominik and Reke, Michael and Walter, Thomas and Kaszner, Daniel},
  title     = {Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain},
  series = {HCII 2023: HCI in Mobility, Transport, and Automotive Systems},
  booktitle = {HCII 2023: HCI in Mobility, Transport, and Automotive Systems},
  editor    = {Kr{\"o}mker, Heidi},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35677-3 (Print)},
  doi       = {10.1007/978-3-031-35678-0_12},
  pages     = {200 -- 210},
  year      = {2023},
  abstract  = {Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle's software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.},
  language  = {en}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@inproceedings{SchulteFischedickTammeHerrmann2009,
  author    = {Schulte-Fischedick, Jan and Tamme, Rainer and Herrmann, Ulf},
  title     = {CFD Analysis of the Cool Down Behaviour of Molten Salt Thermal Storage Systems},
  series = {ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10-14, 2008. - Vol. 2},
  booktitle = {ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10-14, 2008. - Vol. 2},
  publisher = {ASME},
  address   = {New York, NY},
  isbn      = {978-0-7918-4320-8},
  doi       = {doi:10.1115/ES2008-54101},
  pages     = {515 -- 524},
  year      = {2009},
  language  = {de}
}
@inproceedings{SchulteEggert2021,
  author    = {Schulte, Maximilian and Eggert, Mathias},
  title     = {Predicting hourly bitcoin prices based on long short-term memory neural networks},
  series = {Proceedings of the International Conference on Wirtschaftsinformatik (WI) 2021},
  booktitle = {Proceedings of the International Conference on Wirtschaftsinformatik (WI) 2021},
  pages     = {16 Seiten},
  year      = {2021},
  abstract  = {Bitcoin is a cryptocurrency and is considered a high-risk asset class whose price changes are difficult to predict. Current research focusses on daily price movements with a limited number of predictors. The paper at hand aims at identifying measurable indicators for Bitcoin price movements and the development of a suitable forecasting model for hourly changes. The paper provides three research contributions. First, a set of significant indicators for predicting the Bitcoin price is identified. Second, the results of a trained Long Short-term Memory (LSTM) neural network that predicts price changes on an hourly basis is presented and compared with other algorithms. Third, the results foster discussions of the applicability of neural nets for stock price predictions. In total, 47 input features for a period of over 10 months could be retrieved to train a neural net that predicts the Bitcoin price movements with an error rate of 3.52 \%.},
  language  = {en}
}
@inproceedings{SchulteSchwagerNoureldinetal.2023,
  author    = {Schulte, Jonas and Schwager, Christian and Noureldin, Kareem and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Gradient controlled startup procedure of a molten-salt power-to-heat energy storage plant based on dynamic process simulation},
  series = {SolarPACES: Solar Power \& Chemical Energy Systems},
  booktitle = {SolarPACES: Solar Power \& Chemical Energy Systems},
  number    = {2815 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4623-6},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0148741},
  pages     = {9 Seiten},
  year      = {2023},
  abstract  = {The integration of high temperature thermal energy storages into existing conventional power plants can help to reduce the CO2 emissions of those plants and lead to lower capital expenditures for building energy storage systems, due to the use of synergy effects [1]. One possibility to implement that, is a molten salt storage system with a powerful power-to-heat unit. This paper presents two possible control concepts for the startup of the charging system of such a facility. The procedures are implemented in a detailed dynamic process model. The performance and safety regarding the film temperatures at heat transmitting surfaces are investigated in the process simulations. To improve the accuracy in predicting the film temperatures, CFD simulations of the electrical heater are carried out and the results are merged with the dynamic model. The results show that both investigated control concepts are safe regarding the temperature limits. The gradient controlled startup performed better than the temperature-controlled startup. Nevertheless, there are several uncertainties that need to be investigated further.},
  language  = {en}
}
@inproceedings{SchulteSchwagerFrantzetal.2022,
  author    = {Schulte, Jonas and Schwager, Christian and Frantz, Cathy and Schloms, Felix and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Control concept for a molten salt receiver in star design: Development, optimization and testing with cloud passage scenarios},
  series = {SolarPACES 2022 conference proceedings},
  booktitle = {SolarPACES 2022 conference proceedings},
  number    = {1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.693},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {A promising approach to reduce the system costs of molten salt solar receivers is to enable the irradiation of the absorber tubes on both sides. The star design is an innovative receiver design, pursuing this approach. The unconventional design leads to new challenges in controlling the system. This paper presents a control concept for a molten salt receiver system in star design. The control parameters are optimized in a defined test cycle by minimizing a cost function. The control concept is tested in realistic cloud passage scenarios based on real weather data. During these tests, the control system showed no sign of unstable behavior, but to perform sufficiently in every scenario further research and development like integrating Model Predictive Controls (MPCs) need to be done. The presented concept is a starting point to do so.},
  language  = {en}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@article{SchultSistemichHardt1995,
  author    = {Schult, O. W. B. and Sistemich, K. and Hardt, Arno},
  title     = {Plans for investigations of subthreshold K+ production in p+A collisions / O. W. B. Schult [u.a.]},
  series = {Nuclear Physics A. Vol. 583},
  journal   = {Nuclear Physics A. Vol. 583},
  issn      = {1873-1554 (E-journal); 0375-9474 (Print)},
  pages     = {629 -- 632},
  year      = {1995},
  language  = {en}
}
@article{SchuhHoehneHessler2008,
  author    = {Schuh, G{\"u}nther and H{\"o}hne, Tim and Heßler, Stefan},
  title     = {Adaptive Logistik : Informationsmanagement in der Standplatzmontage},
  series = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe},
  journal   = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe},
  pages     = {248 -- 255},
  year      = {2008},
  language  = {de}
}
@inproceedings{SchuhGottschalkHoehneetal.2008,
  author    = {Schuh, G{\"u}nther and Gottschalk, Sebastian and H{\"o}hne, Tim and Attig, Philipp},
  title     = {Further Potentials of Smart Logistics},
  series = {Manufacturing Systems and Technologies for the New Frontier},
  booktitle = {Manufacturing Systems and Technologies for the New Frontier},
  editor    = {Mitsuishi, M.},
  publisher = {Springer},
  address   = {London},
  isbn      = {978-1-84800-267-8},
  doi       = {10.1007/978-1-84800-267-8_18},
  pages     = {93 -- 96},
  year      = {2008},
  language  = {en}
}
@inproceedings{SchuhGottschalkNarretal.2007,
  author    = {Schuh, G{\"u}nther and Gottschalk, Sebastian Friedrich and Narr, Claus and H{\"o}hne, Tim},
  title     = {Adaptive logistics : information management for planning and control of small series assembly},
  series = {2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts},
  booktitle = {2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts},
  editor    = {Z{\"a}h, Michael F.},
  isbn      = {978-0-9783187-0-3},
  pages     = {212 -- 221},
  year      = {2007},
  language  = {en}
}
@article{SchuhKampkerHoehne2006,
  author    = {Schuh, G. and Kampker, A. and H{\"o}hne, Tim},
  title     = {Adaptive Logistik - Selbststeuerung in Fertigung und Montage},
  series = {wt Werkstattstechnik online},
  volume    = {96},
  journal   = {wt Werkstattstechnik online},
  number    = {5},
  issn      = {1436-4980},
  pages     = {321 -- 324},
  year      = {2006},
  language  = {de}
}
@article{SchuhHoehneKampker2005,
  author    = {Schuh, G. and H{\"o}hne, Tim and Kampker, A.},
  title     = {Auftragsmanagement in der Supply Chain wird "lean"},
  series = {wt Werkstattstechnik online},
  volume    = {95},
  journal   = {wt Werkstattstechnik online},
  number    = {4},
  issn      = {1436-4980},
  pages     = {282 -- 285},
  year      = {2005},
  language  = {de}
}
@article{SchuhGottschalkHoehneetal.2008,
  author    = {Schuh, G. and Gottschalk, S. and H{\"o}hne, Tim and Welter, T. and Hille, P.},
  title     = {Dezentrale Montagesteuerung im variantenreichen Maschinen- und Anlagenbau},
  series = {wt Werkstattstechnik online},
  volume    = {98},
  journal   = {wt Werkstattstechnik online},
  number    = {5},
  issn      = {1436-4980},
  pages     = {391 -- 396},
  year      = {2008},
  language  = {de}
}
@inproceedings{SchuhGottschalkHoehneetal.2006,
  author    = {Schuh, G. and Gottschalk, S. and H{\"o}hne, Tim and Cloots, M.},
  title     = {Parametrierung einer Schlupfregelung in der simulativen Produktionsplanung},
  series = {Simulation in Produktion und Logistik 2006 : Tagungsband zur 12. Fachtagung, Kassel, 26. - 27. September 2006},
  booktitle = {Simulation in Produktion und Logistik 2006 : Tagungsband zur 12. Fachtagung, Kassel, 26. - 27. September 2006},
  editor    = {Wenzel, Sigrid},
  isbn      = {3-936150-48-6},
  pages     = {233 -- 243},
  year      = {2006},
  language  = {de}
}
@article{SchuhGottschalkHoehne2007,
  author    = {Schuh, G. and Gottschalk, S. and H{\"o}hne, Tim},
  title     = {High Resolution Production Management},
  series = {CIRP Annals},
  volume    = {56},
  journal   = {CIRP Annals},
  number    = {1},
  issn      = {0007-8506},
  doi       = {10.1016/j.cirp.2007.05.105},
  pages     = {439 -- 442},
  year      = {2007},
  language  = {en}
}
@inproceedings{SchubertSchoening2010,
  author    = {Schubert, Nicole and Sch{\"o}ning, Michael Josef},
  title     = {3. Graduiertentagung der FH Aachen},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-3386},
  year      = {2010},
  abstract  = {Doktoranden der FH Aachen stellen ihre wissenschaftlichen Arbeiten aus verschiedenen Fachdisziplinen vor.},
  subject      = {Graduiertentagung},
  language  = {mul}
}
@article{SchubertScholl2011,
  author    = {Schubert, Nicole and Scholl, Ingrid},
  title     = {Comparing GPU-based multi-volume ray casting techniques},
  series = {Computer Science - Research and Development},
  volume    = {26},
  journal   = {Computer Science - Research and Development},
  number    = {12},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {1865-2042},
  pages     = {39 -- 50},
  year      = {2011},
  language  = {en}
}
@article{SchubertSchoeningSchmidtetal.1999,
  author    = {Schubert, J. and Sch{\"o}ning, Michael Josef and Schmidt, C. and Siegert, M. and Mesters, S. and Zander, W. and Kordos, P. and L{\"u}th, H. and Legin, A. and Mourzina, Y. G. and Seleznev, B. and Vlasov, Y. G.},
  title     = {Chalcogenide-based thin film sensors prepared by pulsed laser deposition technique},
  series = {Applied Physics A. 69, (1999), H. Supplement 1},
  journal   = {Applied Physics A. 69, (1999), H. Supplement 1},
  isbn      = {0947-8396},
  doi       = {10.1007/s003390051534},
  pages     = {803 -- 805},
  year      = {1999},
  language  = {en}
}
@article{SchubertSchoeningMourzinaetal.2001,
  author    = {Schubert, J. and Sch{\"o}ning, Michael Josef and Mourzina, Y. G. and Legin, A. V. and Vlasov, Y. G. and Zander, W. and L{\"u}th, H.},
  title     = {Multicomponent thin films for electrochemical sensor applications prepared by pulsed laser deposition},
  series = {Sensors and Actuators B. 76 (2001), H. 1-3},
  journal   = {Sensors and Actuators B. 76 (2001), H. 1-3},
  isbn      = {0925-4005},
  pages     = {327 -- 330},
  year      = {2001},
  language  = {en}
}
@article{SchubaWronaZavagli2001,
  author    = {Schuba, Marko and Wrona, Konrad and Zavagli, Guido},
  title     = {Mobile Payments - State of the Art and Open Problems / Wrona, Konrad ; Schuba, Marko ; Zavagli, Guido},
  series = {Electronic commerce : second international workshop ; proceedings / WELCOM 2001, Heidelberg, Germany, November 16-17, 2001. Ludger Fiege ... (ed.)},
  journal   = {Electronic commerce : second international workshop ; proceedings / WELCOM 2001, Heidelberg, Germany, November 16-17, 2001. Ludger Fiege ... (ed.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-42878-7},
  pages     = {88 -- 100},
  year      = {2001},
  language  = {en}
}
@article{SchubaWrona1999,
  author    = {Schuba, Marko and Wrona, Konrad},
  title     = {Electronic Commerce Transactions in a Wireless Environment / Schuba, Marko. ; Wrona, Konrad},
  pages     = {1 -- 9},
  year      = {1999},
  language  = {en}
}
@article{SchubaWrona2000,
  author    = {Schuba, Marko and Wrona, Konrad},
  title     = {Mobile Chip Electronic Commerce: Enabling Credit Card Payment for Mobile Devices / Schuba, Marko ; Wrona, Konrad},
  pages     = {1 -- 6},
  year      = {2000},
  language  = {en}
}
@article{SchubaWrona2001,
  author    = {Schuba, Marko and Wrona, Konrad},
  title     = {Security for Mobile Commerce Applications / Schuba, Marko ; Wrona, Konrad},
  pages     = {1 -- 8},
  year      = {2001},
  language  = {en}
}
@book{SchubaSpaniolLinnhoffPopien1995,
  author    = {Schuba, Marko and Spaniol, Otto and Linnhoff-Popien, Claudia},
  title     = {Rechnerstrukturen : Skript zur Vorlesung an der RWTH Aachen / Spaniol, Otto ; Linnhoff-Popien, Claudia ; Schuba, Marko},
  publisher = {Verl. der Augustinus-Buchh.},
  address   = {Aachen},
  isbn      = {3-86073-147-5},
  pages     = {V, 134 S. : graph. Darst.},
  year      = {1995},
  language  = {de}
}
@article{SchubaSpaniol1999,
  author    = {Schuba, Marko and Spaniol, Otto},
  title     = {Interconnection of Local Area Networks via ATM / Spaniol, Otto ; Schuba, Marko},
  series = {High performance networks for multimedia applications / edited by Andr{\´e} Danthine ...},
  journal   = {High performance networks for multimedia applications / edited by Andr{\´e} Danthine ...},
  publisher = {Kluwer Academic Publ.},
  address   = {Dordrecht},
  isbn      = {0-7923-8274-9},
  pages     = {1 -- 10},
  year      = {1999},
  language  = {en}
}
@book{SchubaSchubaReichletal.1998,
  author    = {Schuba, Marko and Schuba, Marko and Reichl, Peter and Schneider, Gaby},
  title     = {Lokale Netze - Skript zur Vorlesung an der RWTH Aachen / Spaniol, Otto,},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-86073-721-X},
  pages     = {138 S. : graph. Darst.},
  year      = {1998},
  language  = {de}
}
@article{SchubaSchneiderHaverkort1998,
  author    = {Schuba, Marko and Schneider, Gaby and Haverkort, Boudewijn R.},
  title     = {QNA-MC: A Performance Evaluation Tool for Communication Networks with Multicast Data Streams / Schneider, G. ; Schuba, M. ; Haverkort, B. R.},
  series = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  journal   = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-64949-2},
  pages     = {105 -- 116},
  year      = {1998},
  language  = {en}
}
@article{SchubaReichlKesdoganetal.1998,
  author    = {Schuba, Marko and Reichl, Peter and Kesdogan, Dogan and Jungh{\"a}rtchen, Klaus},
  title     = {Simulative Performance Evaluation of the Temporary Pseudonym Method for Protecting Location Information in GSM Networks / Reichl, P. ; Kesdogan, D. ; Jungh{\"a}rtchen, K. ; Schuba, M.},
  series = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  journal   = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-64949-2},
  pages     = {105 -- 116},
  year      = {1998},
  language  = {en}
}
@article{SchubaReichlHoff1997,
  author    = {Schuba, Marko and Reichl, Peter and Hoff, Simon},
  title     = {How to Model Complex Periodic Traffic with TES / Reichl, Peter ; Schuba, Marko ; Hoff, Simon},
  series = {Proc. of 13th United Kingdom Workshop on Performance Engineering, Edinburgh, UK, July 1997},
  journal   = {Proc. of 13th United Kingdom Workshop on Performance Engineering, Edinburgh, UK, July 1997},
  pages     = {17/1 -- 17/11},
  year      = {1997},
  language  = {en}
}
@article{SchubaReichl1996,
  author    = {Schuba, Marko and Reichl, Peter},
  title     = {How to Place Connectionless Servers in ATM Networks / Schuba, Marko ; Reichl, Peter},
  series = {Proc. of Fourth IFIP Workshop on Performance Modelling and Evaluation of ATM Networks},
  journal   = {Proc. of Fourth IFIP Workshop on Performance Modelling and Evaluation of ATM Networks},
  pages     = {09/1 -- 09/10},
  year      = {1996},
  language  = {en}
}
@article{SchubaReichl1998,
  author    = {Schuba, Marko and Reichl, Peter},
  title     = {On large-scale reliable multicast protocols / Schuba, M. ; Reichl, P.},
  series = {6th IEE Conference on Telecommunications},
  journal   = {6th IEE Conference on Telecommunications},
  isbn      = {0-85296-700-4},
  pages     = {133 -- 137},
  year      = {1998},
  language  = {en}
}
@article{SchubaReichl1998,
  author    = {Schuba, Marko and Reichl, Peter},
  title     = {An Analysis of Retransmission Strategies for Reliable Multicast Protocols / Schuba, M. ; Reichl, P.},
  series = {Performance of information and communication systems : IFIP TC 6,WG 6.3 Seventh International Conference on Performance of Information and Communication Systems (PICS '98), 25 - 28 May, Lund, Sweden / ed. by Ulf K{\"o}rner ...},
  journal   = {Performance of information and communication systems : IFIP TC 6,WG 6.3 Seventh International Conference on Performance of Information and Communication Systems (PICS '98), 25 - 28 May, Lund, Sweden / ed. by Ulf K{\"o}rner ...},
  publisher = {Chapman Hall},
  address   = {London},
  isbn      = {0-412-83730-7},
  pages     = {1 -- 12},
  year      = {1998},
  language  = {en}
}
@book{SchubaLinnhoffPopienReichletal.1996,
  author    = {Schuba, Marko and Linnhoff-Popien, Claudia and Reichl, Peter and Schuba, Marko},
  title     = {Systemprogrammierung : Skript zur Vorlesung an der RWTH Aachen / Otto Spaniol ...},
  publisher = {Verl. der Augustinus-Buchh.},
  address   = {Aachen},
  isbn      = {3-86073-470-9},
  pages     = {VIII, 166 S. : graph. Darst.},
  year      = {1996},
  language  = {de}
}
@article{SchubaHoefkenSchaefer2012,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm and Schaefer, Thomas},
  title     = {Smartphone Forensik},
  series = {Hakin9 : Practical Protection},
  journal   = {Hakin9 : Practical Protection},
  isbn      = {1733-7186},
  pages     = {10 -- 20},
  year      = {2012},
  language  = {de}
}
@inproceedings{SchubaHoefkenLinzbach2022,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm and Linzbach, Sophie},
  title     = {An ICS Honeynet for Detecting and Analyzing Cyberattacks in Industrial Plants},
  series = {2021 International Conference on Electrical, Computer and Energy Technologies (ICECET)},
  booktitle = {2021 International Conference on Electrical, Computer and Energy Technologies (ICECET)},
  publisher = {IEEE},
  isbn      = {978-1-6654-4231-2},
  doi       = {10.1109/ICECET52533.2021.9698746},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {Cybersecurity of Industrial Control Systems (ICS) is an important issue, as ICS incidents may have a direct impact on safety of people or the environment. At the same time the awareness and knowledge about cybersecurity, particularly in the context of ICS, is alarmingly low. Industrial honeypots offer a cheap and easy to implement way to raise cybersecurity awareness and to educate ICS staff about typical attack patterns. When integrated in a productive network, industrial honeypots may not only reveal attackers early but may also distract them from the actual important systems of the network. Implementing multiple honeypots as a honeynet, the systems can be used to emulate or simulate a whole Industrial Control System. This paper describes a network of honeypots emulating HTTP, SNMP, S7communication and the Modbus protocol using Conpot, IMUNES and SNAP7. The nodes mimic SIMATIC S7 programmable logic controllers (PLCs) which are widely used across the globe. The deployed honeypots' features will be compared with the features of real SIMATIC S7 PLCs. Furthermore, the honeynet has been made publicly available for ten days and occurring cyberattacks have been analyzed},
  language  = {en}
}
@incollection{SchubaHoefken2022,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm},
  title     = {Cybersicherheit in Produktion, Automotive und intelligenten Geb{\"a}uden},
  series = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen},
  booktitle = {IT-Sicherheit - Technologien und Best Practices f{\"u}r die Umsetzung im Unternehmen},
  publisher = {Carl Hanser Verlag},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-47223-5},
  doi       = {10.3139/9783446473478.012},
  pages     = {193 -- 218},
  year      = {2022},
  language  = {de}
}
@article{SchubaHoefken2012,
  author    = {Schuba, Marko and H{\"o}fken, Hans-Wilhelm},
  title     = {Backtrack5: Datensammlung und Reporterstellung f{\"u}r Pentester mit MagicTree},
  series = {Hakin9},
  volume    = {73},
  journal   = {Hakin9},
  number    = {3},
  isbn      = {1733-7186},
  pages     = {12 -- 16},
  year      = {2012},
  language  = {de}
}
@article{SchubaHermanns1994,
  author    = {Schuba, Marko and Hermanns, Oliver},
  title     = {Modellierung von Multicastmechanismen zur Unterst{\"u}tzung von Gruppenkommunikation / Schuba, Marko ; Hermanns, Oliver},
  series = {Neue Konzepte f{\"u}r die offene verteilte Verarbeitung : Tagungsband des 1. Arbeitstreffens an der RWTH Aachen, 5. September 1994 / Hrsg. des Bd.: Claudia Popien und Bernd Meyer},
  journal   = {Neue Konzepte f{\"u}r die offene verteilte Verarbeitung : Tagungsband des 1. Arbeitstreffens an der RWTH Aachen, 5. September 1994 / Hrsg. des Bd.: Claudia Popien und Bernd Meyer},
  publisher = {Verl. der Augustinus-Buchh.},
  address   = {Aachen},
  isbn      = {3-86073-143-2},
  pages     = {137 -- 147},
  year      = {1994},
  language  = {de}
}
@article{SchubaHermanns1995,
  author    = {Schuba, Marko and Hermanns, Oliver},
  title     = {Performance Investigations of the IP Multicast Architecture / Hermanns, Oliver ; Schuba, Marko},
  series = {Performance of the IP Multicast Achitecture . Proceedings JENC 6. Proceedings of the 6th Joint European Networking Conference, Tel Aviv},
  journal   = {Performance of the IP Multicast Achitecture . Proceedings JENC 6. Proceedings of the 6th Joint European Networking Conference, Tel Aviv},
  pages     = {121-1 -- 121-8},
  year      = {1995},
  language  = {en}
}
@article{SchubaHaverkortSchneider2000,
  author    = {Schuba, Marko and Haverkort, Boudewijn R. and Schneider, Gaby},
  title     = {Performance evaluation of multicast communication in packet-switched networks / Schuba, Marko ; Haverkort, Boudewijn R. ; Schneider, Gaby},
  series = {Performance Evaluation. 39 (2000), H. 1-4},
  journal   = {Performance Evaluation. 39 (2000), H. 1-4},
  isbn      = {0166-5316},
  pages     = {61 -- 80},
  year      = {2000},
  language  = {en}
}
@article{SchubaGerstenbergerLahaije2004,
  author    = {Schuba, Marko and Gerstenberger, Volker and Lahaije, Paul},
  title     = {Internet ID - Flexible Reuse of Mobile Phone Authentication Security for Service Access / Schuba, Marko ; Gerstenberger, Volker, ; Lahaije, Paul},
  pages     = {1 -- 7},
  year      = {2004},
  language  = {en}
}
@article{SchubaBusboomHerwonoetal.2002,
  author    = {Schuba, Marko and Busboom, Axel and Herwono, Ian and Zavagli, Guido},
  title     = {Unambiguous Device Identification and Fast Connection Setup in Bluetooth / Busboom, Axel ; Herwono, Ian ; Schuba, Marko ; Zavagli, Guido},
  series = {European wireless 2002 : next generation wireless networks: technologies, protocols, services and applications ; technical sessions: 26 - 28 February 2002, tutorials: 25 February 2002, Centro Affari, Florence, Italy ; proceedings / sponsored by EUREL ... General chair: Luciano Lenzini},
  journal   = {European wireless 2002 : next generation wireless networks: technologies, protocols, services and applications ; technical sessions: 26 - 28 February 2002, tutorials: 25 February 2002, Centro Affari, Florence, Italy ; proceedings / sponsored by EUREL ... General chair: Luciano Lenzini},
  pages     = {1 -- 5},
  year      = {2002},
  language  = {en}
}
@article{Schuba1997,
  author    = {Schuba, Marko},
  title     = {A Performance Evaluation of Connectionless Overlay Networks for ATM},
  series = {INFOCOM ´97. Sixteenth Annual Joint Conference of the IEEE Computer and Communications Societies. Proceedings Vol. 1},
  journal   = {INFOCOM ´97. Sixteenth Annual Joint Conference of the IEEE Computer and Communications Societies. Proceedings Vol. 1},
  isbn      = {0-8186-7780-5},
  pages     = {152 -- 158},
  year      = {1997},
  language  = {en}
}
@article{Schuba1998,
  author    = {Schuba, Marko},
  title     = {SRMT-a scalable and reliable multicast transport protocol},
  series = {IEEE International Conference on Communications, 1998. ICC 98. Vol. 1},
  journal   = {IEEE International Conference on Communications, 1998. ICC 98. Vol. 1},
  isbn      = {0-7803-4788-9},
  pages     = {612 -- 616},
  year      = {1998},
  language  = {en}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Analysis of Feedback Error Control Schemes for Block Based Video Communication / Meggers, Jens ; Schuba, Marko},
  year      = {1999},
  language  = {en}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Analyse der Antwortzeit von zuverl{\"a}ssigen Multicast-Protokollen im Internet},
  series = {Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]},
  journal   = {Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]},
  address   = {Braunschweig},
  pages     = {1 -- 14},
  year      = {1999},
  language  = {en}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Performance Analysis of Reliable Multicast Mechanisms for Widely Spread Distributed Applications in the Internet},
  series = {International Conference on Parallel and Distributed Processing Techniques and Applications : PDPTA '99 ; June 28 - July 1, 1999, Las Vegas, Nevada, USA / ed.: Hamid R. Arabnia},
  journal   = {International Conference on Parallel and Distributed Processing Techniques and Applications : PDPTA '99 ; June 28 - July 1, 1999, Las Vegas, Nevada, USA / ed.: Hamid R. Arabnia},
  isbn      = {1892512157},
  pages     = {1 -- 7},
  year      = {1999},
  language  = {en}
}
@book{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Skalierbare und zuverl{\"a}ssige Multicast-Kommunikation im Internet},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-6289-5},
  pages     = {IV, 198 S. : graph. Darst.},
  year      = {1999},
  language  = {de}
}
@article{SchrothWeissbeckerSchuetzetal.2002,
  author    = {Schroth, P. and Weißbecker, B. and Sch{\"u}tz, S. and Ecken, H. and Yoshinobu, T. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Bioelectronic signal processing - intact chemoreceptors coupled to field-effect devices},
  series = {Lecture Notes of the ICB Seminars},
  journal   = {Lecture Notes of the ICB Seminars},
  publisher = {MCB},
  address   = {Warsaw},
  pages     = {28 -- 42},
  year      = {2002},
  language  = {en}
}
@article{SchrothWeissbeckerSchuetzetal.2001,
  author    = {Schroth, P. and Weißbecker, B. and Sch{\"u}tz, S. and Ecken, H. and Yoshinobu, T. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Bioelectronic signal processing - intact chemoreceptors coupled to field-effect devices},
  series = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 3},
  journal   = {Biocybernetics and Biomedical Engineering. 21 (2001), H. 3},
  isbn      = {0208-5216},
  pages     = {27 -- 42},
  year      = {2001},
  language  = {en}
}
@article{SchrothSchoeningSchuetzetal.2000,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and Sch{\"u}tz, S. and Steffen, A. and Weißbecker, B. and Hummel, Hans E. and Kordos, P. and L{\"u}th, H.},
  title     = {Nachweis von organischen Duftstoffen durch Biosensoren auf der Basis von Insektenantennen},
  series = {Gesellschaft Mess- und Automatisierungstechnik: Sensoren und Meßsysteme 2000 : Tagung Ludwigsburg, 13. und 14. M{\"a}rz 2000 / VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik},
  journal   = {Gesellschaft Mess- und Automatisierungstechnik: Sensoren und Meßsysteme 2000 : Tagung Ludwigsburg, 13. und 14. M{\"a}rz 2000 / VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf:},
  isbn      = {3-18-091530-7},
  pages     = {107 -- 114},
  year      = {2000},
  language  = {de}
}
@article{SchrothSchoeningSchuetzetal.1999,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and Sch{\"u}tz, S. and Malkoc, {\"U}. and Steffen, A. and Marso, M. and Hummel, Hans E. and Kordos, P. and L{\"u}th, H.},
  title     = {Coupling of insect antennae to field-effect transistors for biochemical sensing},
  series = {Electrochimica Acta. 44 (1999), H. 21-22},
  journal   = {Electrochimica Acta. 44 (1999), H. 21-22},
  issn      = {0013-4686},
  pages     = {3821 -- 3826},
  year      = {1999},
  language  = {en}
}
@article{SchrothSchoeningSchuetzetal.1999,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and Sch{\"u}tz, S. and Epanya, P. and Steffen, A. and Weißbecker, B. and Hummel, Hans E. and Kordos, P. and L{\"u}th, H.},
  title     = {Improving the bioelectronic interface of an antenna/chip biosensor - technological aspects},
  series = {Proceedings : The Hague, The Netherlands, September 12 - 15, 1999 / [ed. by M. Bartek]. Vol 1.},
  journal   = {Proceedings : The Hague, The Netherlands, September 12 - 15, 1999 / [ed. by M. Bartek]. Vol 1.},
  address   = {The Hague, The Netherlands},
  isbn      = {90-76699-02-X},
  pages     = {569 -- 572},
  year      = {1999},
  language  = {en}
}
@article{SchrothSchoeningLuethetal.2001,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and L{\"u}th, H. and Weißbecker, B. and Hummel, Hans E. and Sch{\"u}tz, S.},
  title     = {Extending the capabilities of an antenna/chip biosensor by employing various insect species},
  series = {Sensors and Actuators B. 78 (2001), H. 1-3},
  journal   = {Sensors and Actuators B. 78 (2001), H. 1-3},
  isbn      = {0925-4005},
  pages     = {1 -- 5},
  year      = {2001},
  language  = {en}
}
@article{SchrothSchoeningLuethetal.2000,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and L{\"u}th, H. and Weißbecker, B. and Hummel, Hans E. and Sch{\"u}tz, S.},
  title     = {Extending the capabilities of an antenna/chip biosensor by employing various insect species},
  series = {Proceedings : Copenhagen, Denmark, 27 - 30 August 2000 / [ed.: R. de Reus ...]},
  journal   = {Proceedings : Copenhagen, Denmark, 27 - 30 August 2000 / [ed.: R. de Reus ...]},
  publisher = {MIC, Mikroelektronik Centret},
  address   = {Lyngby, Denmark},
  isbn      = {87-89935-50-0},
  pages     = {27 -- 30},
  year      = {2000},
  language  = {en}
}
@article{SchrothSchoeningKordosetal.1999,
  author    = {Schroth, P. and Sch{\"o}ning, Michael Josef and Kordos, P. and L{\"u}th, H. and Sch{\"u}tz, S. and Weißbecker, B. and Hummel, Hans E.},
  title     = {Insectbased BioFETs with improved signal characteristics},
  series = {Biosensors \& Bioelectronics. 14 (1999), H. 3},
  journal   = {Biosensors \& Bioelectronics. 14 (1999), H. 3},
  issn      = {0956-5663},
  pages     = {303 -- 308},
  year      = {1999},
  language  = {en}
}
@article{SchrothLuethHummeletal.2001,
  author    = {Schroth, P. and L{\"u}th, H. and Hummel, Hans E. and Sch{\"u}tz, S. and Sch{\"o}ning, Michael Josef},
  title     = {Characterising an insect antenna as a receptor for a biosensor by means of impedance spectroscopy},
  series = {Scaling down in electrochemistry : electrochemical micro- and nanosystem technology ; proceedings of the 3rd International Symposium on Electrochemical Microsystem Technologies, Garmisch-Patenkirchen, Germany, 11 - 15 September 2000 / ed. by J. W. Schultz},
  journal   = {Scaling down in electrochemistry : electrochemical micro- and nanosystem technology ; proceedings of the 3rd International Symposium on Electrochemical Microsystem Technologies, Garmisch-Patenkirchen, Germany, 11 - 15 September 2000 / ed. by J. W. Schultz},
  publisher = {Elsevier [u.a.]},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-08-044014-2},
  pages     = {293 -- 297},
  year      = {2001},
  language  = {en}
}
@article{SchroeterHoffmannVoigtetal.2014,
  author    = {Schroeter, Rebecca and Hoffmann, Tamara and Voigt, Birgit and Meyer, Hanna and Bleisteiner, Monika and Muntel, Jan and J{\"u}rgen, Britta and Albrecht, Dirk and Becher, D{\"o}rte and Lalk, Michael and Evers, Stefan and Bongaerts, Johannes and Maurer, Karl-Heinz and Putzer, Harald and Hecker, Michael and Schweder, Thomas and Bremer, Erhard},
  title     = {Stress responses of the industrial workhorse Bacillus licheniformis to osmotic challenges},
  series = {PLoS ONE},
  volume    = {8},
  journal   = {PLoS ONE},
  number    = {11},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0080956},
  pages     = {e80956},
  year      = {2014},
  abstract  = {The Gram-positive endospore-forming bacterium Bacillus licheniformis can be found widely in nature and it is exploited in industrial processes for the manufacturing of antibiotics, specialty chemicals, and enzymes. Both in its varied natural habitats and in industrial settings, B. licheniformis cells will be exposed to increases in the external osmolarity, conditions that trigger water efflux, impair turgor, cause the cessation of growth, and negatively affect the productivity of cell factories in biotechnological processes. We have taken here both systems-wide and targeted physiological approaches to unravel the core of the osmostress responses of B. licheniformis. Cells were suddenly subjected to an osmotic upshift of considerable magnitude (with 1 M NaCl), and their transcriptional profile was then recorded in a time-resolved fashion on a genome-wide scale. A bioinformatics cluster analysis was used to group the osmotically up-regulated genes into categories that are functionally associated with the synthesis and import of osmostress-relieving compounds (compatible solutes), the SigB-controlled general stress response, and genes whose functional annotation suggests that salt stress triggers secondary oxidative stress responses in B. licheniformis. The data set focusing on the transcriptional profile of B. licheniformis was enriched by proteomics aimed at identifying those proteins that were accumulated by the cells through increased biosynthesis in response to osmotic stress. Furthermore, these global approaches were augmented by a set of experiments that addressed the synthesis of the compatible solutes proline and glycine betaine and assessed the growth-enhancing effects of various osmoprotectants. Combined, our data provide a blueprint of the cellular adjustment processes of B. licheniformis to both sudden and sustained osmotic stress.},
  language  = {en}
}
@masterthesis{Schrey2021,
  type      = {Bachelor Thesis},
  author    = {Schrey, Leander},
  title     = {Less Waste Shelf: Ein M{\"o}bel zur Reduzierung der h{\"a}uslich anfallenden Lebensmittelabf{\"a}lle},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {177 Seiten},
  year      = {2021},
  abstract  = {Mit dem Projekt wird sich dem Problem der weltweiten Lebensmittelverschwendung angenommen und versucht Abf{\"a}lle in Privathaushalten prim{\"a}r industrialisierter Staaten zu reduzieren. Mit j{\"a}hrlich 1,3 Milliarden Tonnen landet circa ein Drittel aller weltweit produzierten Lebensmittel im M{\"u}ll. Einen Großteil dieser Abf{\"a}lle ist vermeidbar, besonders dort, wo man im {\"U}berfluss lebt. Das konzipierte M{\"o}belst{\"u}ck soll die Lagerungsm{\"o}glichkeiten des Nutzers optimieren und somit f{\"u}r die Wertsch{\"a}tzung von Lebensmitteln sensibilisieren. F{\"u}r das M{\"o}belst{\"u}ck werden ausschließlich nat{\"u}rliche Materialien verwendet, welche in ihrer Charakteristik optimal zum Funktionsumfang passen, der f{\"u}r die Lagerung ben{\"o}tigt wird. Das Material Terracotta erm{\"o}glicht es, mittels Verdunstungsk{\"u}hlung stromlos Gem{\"u}se kalt zu halten. Antibakterielles Holz t{\"o}tet sch{\"a}dliche Bakterien ab. Die Konstruktion erm{\"o}glicht somit eine fachgerechte Lebensmittelagerung und erm{\"o}glicht sowohl sehr flexible Nutzung, wie auch leichte Reparatur.},
  language  = {de}
}
@inproceedings{SchreiberKraftZuendorf2016,
  author    = {Schreiber, Marc and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {Cost-efficient quality assurance of natural language processing tools through continuous monitoring with continuous integration},
  series = {3rd International Workshop on Software Engineering Research and Industrial Practice},
  booktitle = {3rd International Workshop on Software Engineering Research and Industrial Practice},
  doi       = {10.1145/2897022.2897029},
  pages     = {46 -- 52},
  year      = {2016},
  language  = {en}
}