@article{BreitbachSchmidtPlutkaSchubertetal.1993,
  author    = {Breitbach, Gerd and Schmidt-Plutka, A. and Schubert, F. and Nickel, H.},
  title     = {Deformation behaviour of structures exposed at very high temperatures to cyclic thermal and mechanical loadings},
  series = {Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures},
  journal   = {Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures},
  publisher = {Elsevier},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-444-81515-5},
  pages     = {203 -- 208},
  year      = {1993},
  language  = {en}
}
@article{BreitbachSchmidtPlutkaSchubert1992,
  author    = {Breitbach, Gerd and Schmidt-Plutka, A. and Schubert, F.},
  title     = {Untersuchungen zum Kriechratcheting bei dickwandigen Rohren / G. Breitbach ; A. Schmidt-Plutka ; F. Schubert ...},
  series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Kerntechnik : vorrangige Thematik: Langzeitsicherheit und neue Reaktorkonzepte ; 8. und 9. Oktober 1992 / Staatliche Materialpr{\"u}fungsanstalt (MPA), Universit{\"a}t Stuttgart. - Bd. 1: Rohrleitungs- und Beh{\"a}lterintegrit{\"a}t, Bruchmechanik, Korrosion : (Vortr{\"a}ge 1 - 32)},
  journal   = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Kerntechnik : vorrangige Thematik: Langzeitsicherheit und neue Reaktorkonzepte ; 8. und 9. Oktober 1992 / Staatliche Materialpr{\"u}fungsanstalt (MPA), Universit{\"a}t Stuttgart. - Bd. 1: Rohrleitungs- und Beh{\"a}lterintegrit{\"a}t, Bruchmechanik, Korrosion : (Vortr{\"a}ge 1 - 32)},
  publisher = {MPA},
  address   = {Stuttgart},
  pages     = {9.1 -- 9.16},
  year      = {1992},
  language  = {de}
}
@article{BreitbachSchmidtPlutkaSchubert1992,
  author    = {Breitbach, Gerd and Schmidt-Plutka, A. and Schubert, F.},
  title     = {Einfluß von Temperaturschwankungen auf das Verformungsverhalten von Rohren bei hohen Temperaturen},
  series = {VGB-Konferenz "Restlebensdauer 1992" : 6. und 7. Juli 1992, Mannheim ; Vortr{\"a}ge = VGB Conference "Residual Service Life 1992" / VGB Technische Vereinigung der Grosskraftwerksbetreiber e.V. Leitung der Tagung: U. Gramberg. - Bd. 2},
  journal   = {VGB-Konferenz "Restlebensdauer 1992" : 6. und 7. Juli 1992, Mannheim ; Vortr{\"a}ge = VGB Conference "Residual Service Life 1992" / VGB Technische Vereinigung der Grosskraftwerksbetreiber e.V. Leitung der Tagung: U. Gramberg. - Bd. 2},
  address   = {Mannheim},
  pages     = {1 -- 16},
  year      = {1992},
  language  = {de}
}
@article{BreitbachPenkallaSchubert1989,
  author    = {Breitbach, Gerd and Penkalla, H.-J. and Schubert, F.},
  title     = {Diskussion eines neuen ORNL-Stoffgesetzes fuer Inconel 617 / H.-J. Penkalla ; G. Breitbach ; F. Schubert},
  series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Langzeitintegrit{\"a}t der druckf{\"u}hrenden Bauteile von Kernkraftwerken : [5. - 6. Oktober 1989] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Zeitstandvehalten, Kriechvorg{\"a}nge, Rohrleitungsverhalten, Bruchmechanik : (Vortr{\"a}ge 23 - 45)},
  journal   = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Langzeitintegrit{\"a}t der druckf{\"u}hrenden Bauteile von Kernkraftwerken : [5. - 6. Oktober 1989] / Staatliche Materialpr{\"u}fungsanstalt Universit{\"a}t Stuttgart. - Bd. 2 : Zeitstandvehalten, Kriechvorg{\"a}nge, Rohrleitungsverhalten, Bruchmechanik : (Vortr{\"a}ge 23 - 45)},
  publisher = {MPA},
  address   = {Stuttgart},
  pages     = {28.1 -- 28.20},
  year      = {1989},
  language  = {de}
}
@article{BreitbachOverBieniussa1984,
  author    = {Breitbach, Gerd and Over, H. H. and Bieniussa, K.},
  title     = {Einfluss von thermisch induzierten Sekund{\"a}rspannungen auf die Lebensdauer eines im Hochtemperaturbereich beanspruchten Bauteils / H. H. Over ; G. Breitbach ; K. Bieniussa},
  series = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Bruchausschluss : [10. - 13. Oktober 1984] / Staatliche Materialpr{\"u}fungsanstalt, Universit{\"a}t Stuttgart. - Bd. 2 : Bruchausschluß, Thermoschock, Hochtemperaturreaktor/SNR, Anlagentechnik : (Vortr{\"a}ge 28 - 50)},
  journal   = {Sicherheit und Verf{\"u}gbarkeit in der Anlagentechnik mit dem Schwerpunkt Bruchausschluss : [10. - 13. Oktober 1984] / Staatliche Materialpr{\"u}fungsanstalt, Universit{\"a}t Stuttgart. - Bd. 2 : Bruchausschluß, Thermoschock, Hochtemperaturreaktor/SNR, Anlagentechnik : (Vortr{\"a}ge 28 - 50)},
  publisher = {MPA},
  address   = {Stuttgart},
  pages     = {43.1 -- 43.11},
  year      = {1984},
  language  = {de}
}
@book{BreitbachNickelAltes1985,
  author    = {Breitbach, Gerd and Nickel, Manfred and Altes, J{\"u}rgen},
  title     = {Experimentelle Untersuchungen zur Eignung von Kanalsystemen f{\"u}r Linerleckortung und Dr{\"a}nage in einem Spannbetonbeh{\"a}lter / von M. Nickel ; G. Breitbach ; J. Altes ...},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {48, [44] S. : Ill., graph. Darst.},
  year      = {1985},
  language  = {de}
}
@article{BreitbachNickelSchubert1990,
  author    = {Breitbach, Gerd and Nickel, H. and Schubert, F.},
  title     = {Stand der Aktivit{\"a}ten zu Regelwerken f{\"u}r heliumgek{\"u}hlte Hochtemperaturreaktoren / H. Nickel ; F. Schubert ; G. Breitbach},
  series = {Atomwirtschaft - Atomtechnik. 35 (1990), H. 2},
  journal   = {Atomwirtschaft - Atomtechnik. 35 (1990), H. 2},
  isbn      = {0004-721x},
  pages     = {74 -- 79},
  year      = {1990},
  language  = {de}
}
@article{BreitbachMohrKroeger1983,
  author    = {Breitbach, Gerd and Mohr, H.-G. and Kroeger, W.},
  title     = {Kann der Aufwand f{\"u}r qualit{\"a}tssichernde Maßnahmen bei 'kleinen Reaktoren' gering gehalten werden? / H.-G. Mohr ; W. Kroeger ; G. Breitbach},
  series = {Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V.},
  journal   = {Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V.},
  publisher = {Deutsches Atomforum},
  address   = {Bonn},
  isbn      = {0173-0924},
  pages     = {199 -- 202},
  year      = {1983},
  language  = {de}
}
@book{BreitbachMertensBongartz1988,
  author    = {Breitbach, Gerd and Mertens, J. and Bongartz, R.},
  title     = {Zum St{\"o}rfallverhalten des HTR-100 : eine risikoorientierte Analyse / Red. Bearb. J. Mertens. R. Bongartz ... G. Breitbach ...},
  publisher = {Zentralbibliothek d. Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {VI, 101 S. : graph. Darst.},
  year      = {1988},
  language  = {de}
}
@book{BreitbachMertens1985,
  author    = {Breitbach, Gerd and Mertens, J. [Hrsg.]},
  title     = {Sicherheitstechnische Untersuchungen zum St{\"o}rfallverhalten des HTR-Modul / [KFA, Kernforschungsanlage J{\"u}lich, GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]. Von G. Breitbach ... Zsgest. von J. Mertens},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {V, 211 S. : Ill., zahlr. graph. Darst.},
  year      = {1985},
  language  = {de}
}
@book{BreitbachKraglRoedigetal.1986,
  author    = {Breitbach, Gerd and Kragl, S. and Roedig, M. and Penkalla, H.-J.},
  title     = {Zur Berechnung von Kriechverformungen und Spannungen in dickwandigen Rohren},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {34, [23] S. : graph. Darst.},
  year      = {1986},
  language  = {de}
}
@article{BreitbachKlomfassHannen1992,
  author    = {Breitbach, Gerd and Klomfass, J. and Hannen, W.},
  title     = {Temperatur- und Dehnungsmessung an komplex beanspruchten metallischen Bauteilen im Temperaturbereich um 900 C / J. Klomfass ; W. Hannen ; G. Breitbach},
  series = {Vortr{\"a}ge der Tagung Werkstoffpr{\"u}fung 1992 : 3. und 4. Dezember 1992 in Bad Nauheim / DVM, Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung e.V. Veranstaltet von: Deutsche Gesellschaft f{\"u}r Materialkunde ...},
  journal   = {Vortr{\"a}ge der Tagung Werkstoffpr{\"u}fung 1992 : 3. und 4. Dezember 1992 in Bad Nauheim / DVM, Deutscher Verband f{\"u}r Materialforschung und -pr{\"u}fung e.V. Veranstaltet von: Deutsche Gesellschaft f{\"u}r Materialkunde ...},
  publisher = {DVM},
  address   = {Berlin},
  pages     = {93 -- 100},
  year      = {1992},
  language  = {de}
}
@article{BreitbachJahnRehm1985,
  author    = {Breitbach, Gerd and Jahn, W. and Rehm, W.},
  title     = {Prim{\"a}rkreislauf - Thermodynamik und Komponentenbelastung},
  series = {Sicherheitstechnische Untersuchungen zum St{\"o}rfallverhalten des HTR-Modul / [KFA, Kernforschungsanlage J{\"u}lich, GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung] / zsgest. von J. Mertens},
  journal   = {Sicherheitstechnische Untersuchungen zum St{\"o}rfallverhalten des HTR-Modul / [KFA, Kernforschungsanlage J{\"u}lich, GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung] / zsgest. von J. Mertens},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {61 -- 98},
  year      = {1985},
  language  = {de}
}
@book{BreitbachFrankSchubert1996,
  author    = {Breitbach, Gerd and Frank, D. and Schubert, F.},
  title     = {Bestimmung des Verformungs- und Versagensverhaltens von stengelkristallinen Gasturbinenschaufeln aus IN 792 DS / D. Frank ; F. Schubert ; G. Breitbach ...},
  publisher = {Forschungszentrum J{\"u}lich, Zentralbibliothek},
  address   = {J{\"u}lich},
  pages     = {139 S. : Ill., graph. Darst.},
  year      = {1996},
  language  = {de}
}
@book{BreitbachFassbenderAltes1983,
  author    = {Breitbach, Gerd and Fassbender, Josef and Altes, J{\"u}rgen},
  title     = {Nukleare Prozessw{\"a}rmeanlage AVR-II : sicherheitstechnische Untersuchungen / Institut f{\"u}r Nukleare Sicherheitsforschung. Von J. Fassbender ; J. Altes ; S. Becker ... G. Breitbach ...},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {221 S. : graph. Darst.},
  year      = {1983},
  language  = {de}
}
@article{BreitbachDeschkaAkiba1992,
  author    = {Breitbach, Gerd and Deschka, S. and Akiba, M.},
  title     = {High heat flux tests on brazed divertor components in electron and ion beam test facilities / S. Deschka ; M. Akiba ; G. Breitbach ...},
  series = {International journal of refractory metals and hard materials. 11 (1992), H. 6},
  journal   = {International journal of refractory metals and hard materials. 11 (1992), H. 6},
  isbn      = {0263-4368},
  pages     = {367 -- 375},
  year      = {1992},
  language  = {en}
}
@article{BreitbachDavidLohnert1984,
  author    = {Breitbach, Gerd and David, P.-H. and Lohnert, G.-H.},
  title     = {Absch{\"a}tzung des langfristigen Lufteintrags nach einem Druckentlastungsst{\"o}rfall des HTR-Modul},
  series = {Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft},
  journal   = {Jahrestagung Kerntechnik '84 : Alte Oper, Frankfurt, 22. - 24. Mai 1984 ; Tagungsbericht / Kerntechnische Gesellschaft},
  publisher = {Deutsches Atomforum},
  address   = {Bonn},
  isbn      = {0173-0924},
  pages     = {287 -- 290},
  year      = {1984},
  language  = {de}
}
@book{BreitbachDavidDegen1984,
  author    = {Breitbach, Gerd and David, P.-H. and Degen, G.},
  title     = {Zum St{\"o}rfallverhalten des HTR-Modul : eine Trendanalyse / [Kernforschungsanlage J{\"u}lich GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]. Von G. Breitbach ...},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {48 S. : graph. Darst.},
  year      = {1984},
  language  = {de}
}
@book{BreitbachDavidNickeletal.1988,
  author    = {Breitbach, Gerd and David, H.P. and Nickel, M. and Wolters, J.},
  title     = {Ausstr{\"o}m- und Gasaustauschvorg{\"a}nge nach Lecks im Prim{\"a}rkreislauf von Hochtemperaturreaktoren},
  publisher = {Zentralbibliothek d. Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {31 S. : graph. Darst.},
  year      = {1988},
  language  = {de}
}
@book{BreitbachDavidNickel1984,
  author    = {Breitbach, Gerd and David, H.-P. and Nickel, M.},
  title     = {Gasaustausch zwischen einem Helium enthaltenden Beh{\"a}lter und der Umgebung {\"u}ber ein nach unten abgehendes Rohr und dessen Relevanz f{\"u}r den HTR-Modul / [KFA, Kernforschungsanlage J{\"u}lich, GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {16, 14 S. : 14 Ill. u. graph. Darst.},
  year      = {1984},
  language  = {de}
}
@book{BreitbachBeckmoellerPenkalla1994,
  author    = {Breitbach, Gerd and Beckm{\"o}ller, S. and Penkalla, H. J.},
  title     = {Inelastische Analyse des Verformungsverhaltens einer innengek{\"u}hlten Gasturbinenschaufel aus dem Werkstoff IN 738 LC unter Verwendung des strukturabh{\"a}ngigen Werkstoffmodells / S. Beckm{\"o}ller ; H. J. Penkalla ; G. Breitbach ...},
  publisher = {Forschungszentrum J{\"u}lich, Zentralbibliothek},
  address   = {J{\"u}lich},
  pages     = {I, 102 S. : Ill., graph. Darst.},
  year      = {1994},
  language  = {de}
}
@article{BreitbachAltesSzimmat1989,
  author    = {Breitbach, Gerd and Altes, J{\"u}rgen and Szimmat, J.},
  title     = {Anwendung der Finite-Element-Methode bei der Berechnung des W{\"a}rmetransports durch Strahlung / J. Altes ; G. Breitbach ; J. Szimmat},
  series = {International FEM-Congress : Baden-Baden, Federal Republic of Germany, 17./18. November 1986},
  journal   = {International FEM-Congress : Baden-Baden, Federal Republic of Germany, 17./18. November 1986},
  publisher = {IKO Software Service GmbH},
  address   = {Stuttgart},
  pages     = {127 -- 148},
  year      = {1989},
  language  = {de}
}
@book{BreitbachAltesDavid1984,
  author    = {Breitbach, Gerd and Altes, J{\"u}rgen and David, H.-P.},
  title     = {Sicherheitstechnische Untersuchungen zum St{\"o}rfallverhalten des HTR-500 : Erg.-Bd. mit vertiefenden Einzelbeitr. zum Bericht J{\"u}l-Spez-220 / [Kernforschungsanlage J{\"u}lich GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]. Von J. Altes ; G. Breitbach ; H.-P. David ...},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {IV, 217 S. : Ill., graph. Darst.},
  year      = {1984},
  language  = {de}
}
@book{BreitbachAltes1983,
  author    = {Breitbach, Gerd and Altes, J{\"u}rgen},
  title     = {Zum St{\"o}rfallverhalten des HTR 500 : eine Trendanalyse / [KFA, Kernforschungsanlage J{\"u}lich GmbH, Inst. f{\"u}r Nukleare Sicherheitsforschung]. Von J. Altes ; G.Breitbach...},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {41 S. : graph. Darst.},
  year      = {1983},
  language  = {de}
}
@book{BreitbachAltes1985,
  author    = {Breitbach, Gerd and Altes, J{\"u}rgen},
  title     = {Anwendung der Finite Elemente Methode auf Probleme mit W{\"a}rmestrahlungsaustausch},
  publisher = {Zentralbibliothek der Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {28 S. : graph. Darst.},
  year      = {1985},
  language  = {de}
}
@inproceedings{BreitbachAlexopoulosMayetal.2019,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and May, Martin and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Analysis of volumetric solar radiation absorbers made of wire meshes},
  series = {AIP Conference Proceedings},
  volume    = {2126},
  booktitle = {AIP Conference Proceedings},
  issn      = {0094243X},
  doi       = {10.1063/1.5117521},
  pages     = {030009-1 -- 030009-6},
  year      = {2019},
  language  = {en}
}
@inproceedings{BreitbachAlexopoulosHoffschmidt2007,
  author    = {Breitbach, Gerd and Alexopoulos, Spiros and Hoffschmidt, Bernhard},
  title     = {Fluid flow in porous ceramic multichannel crossflower filter modules},
  publisher = {COMSOL Inc.},
  address   = {Burlington, Mass.},
  pages     = {5 S.},
  year      = {2007},
  language  = {en}
}
@book{BreitbachAhmedOver1991,
  author    = {Breitbach, Gerd and Ahmed, K. and Over, H.},
  title     = {Ermittlung von Sicherheitsabst{\"a}nden bei Kriechbelastung von Prim{\"a}rkreiskomponenten durch Simulation von Druckentlastungsst{\"o}rf{\"a}llen einer HTR-Anlage (SR 383) : Abschlußbericht},
  publisher = {Forschungszentrum J{\"u}lich, Zentralbibliothek},
  address   = {J{\"u}lich},
  pages     = {Getr. Z{\"a}hlung : Ill., graph. Darst.},
  year      = {1991},
  language  = {de}
}
@article{Breitbach1983,
  author    = {Breitbach, Gerd},
  title     = {Spannungs- und Kriechsch{\"a}digungsanalyse f{\"u}r die Rohre eines HTR-beheizten R{\"o}hrenspaltofens},
  series = {Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V.},
  journal   = {Kerntechnik '83 : Jahrestagung Kerntechnik , Berlin, 14.-16. Juni 1983. Tagungsbericht / Hrsg.: Kerntechnische Gesellschaft e.V. und Deutsches Atomforum e.V.},
  publisher = {Deutsches Atomforum},
  address   = {Bonn},
  isbn      = {0173-0924},
  pages     = {659 -- 662},
  year      = {1983},
  language  = {de}
}
@book{Breitbach1989,
  author    = {Breitbach, Gerd},
  title     = {Proceedings of the Workshop on Structural Design Criteria for HTR : J{\"u}lich, 31. January - 1. February 1989 / ed.: G. Breitbach ... - Als Ms. gedr.},
  publisher = {Zentralbibliothek d. Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {VII, 548 S. : Ill., graph. Darst.},
  year      = {1989},
  language  = {en}
}
@techreport{Breitbach2009,
  author    = {Breitbach, Gerd},
  title     = {Endbericht f{\"u}r das Projekt FilterCaps : Vorhabensbezeichnung: Entwicklung eines W{\"a}rmespeichers f{\"u}r str{\"o}mungsrichtungsinvertierende L{\"u}ftungssysteme mit integrierter Filterwirkung : F{\"o}rderkennzeichen: 1752X06},
  pages     = {82 S.},
  year      = {2009},
  language  = {de}
}
@masterthesis{Breitbach2022,
  type      = {Bachelor Thesis},
  author    = {Breitbach, Evgeniya},
  title     = {goodays Garderobe : eine Saison \& Wetter orientierte Station},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {61 Seiten},
  year      = {2022},
  abstract  = {Garderobe- ist ein M{\"o}belst{\"u}ck, dessen Nutzungsbedingungen alleine von den Jahreszeiten und dem Wetter bestimmt werden. Mit dem Wechsel der Saison ver{\"a}ndert sich auch unsere Garderobe. Garderobe ist auch erstes Erscheinungsbild eines Zuhauses, welches vieles {\"u}ber deren Bewohner verr{\"a}t. Goodays ist eine erweiterungsf{\"a}hige und nach dem Wetter/Zweck ver{\"a}nderbare Station. Es gibt Feuchtigkeit und Schmutz orientierte Fl{\"a}chen und l{\"u}ftungsf{\"a}hige R{\"a}ume, um Ger{\"u}che zu vermeiden. Die Dimensionen sind flexibel, was nicht viel Platz und Lichtfang wegnimmt. Die Tiefe des M{\"o}belst{\"u}ckes entspricht den notwendigen Kleidern und Schuhmaßen. Verschiede Bestandteile der Kollektion unterst{\"u}tzen bei der Forderung zur Ruhe und verringern den visuellen L{\"a}rm. Geschlossene Staur{\"a}ume sorgen f{\"u}r mehr Ordnung und Neutralit{\"a}t. Die Station bietet Komfort in der Form von Sitzfl{\"a}che und ausreichender Ablagefl{\"a}che.},
  language  = {de}
}
@masterthesis{Brauweiler2024,
  type      = {Bachelor Thesis},
  author    = {Brauweiler, Philipp},
  title     = {incontrare : Gestaltung eines Meeting Raumes durch Konzeptm{\"o}bel},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {123 Seiten},
  year      = {2024},
  abstract  = {Incontrare, was {\"u}bersetzt Begegnung bedeutet, ist ein Konferenztischkonzept, der durch seinen modularen Aufbau heraus sticht. Dem Kunden ist es m{\"o}glich das Produkt mit einem einzigen Werkzeug - f{\"u}nfer Imbusschl{\"u}ssel - aufzubauen. Der modulare Aufbau bietet die M{\"o}glichkeit kundenorientiert ein Produkt zusammensetzen zu k{\"o}nnen. Incontrare bietet hierdurch eine Vielzahl an Variationen, die nicht nur die gestalterischen Aspekte anspricht, sondern auch verschiedene Preisklassen abdeckt. Incontrare ist ein Tischkonzept, das sowohl im niederpreisigen , sowie auch im HighEnd Bereich funktioniert.},
  language  = {de}
}
@inproceedings{BraunsteinGoldmannAlbrachtetal.2013,
  author    = {Braunstein, Bjoern and Goldmann, Jan-Peter and Albracht, Kirsten and Sanno, Maximilian and Willwacher, Steffen and Heinrich, Kai and Herrmann, Volker and Br{\"u}ggemann, Gert-Peter},
  title     = {Joint specific contribution of mechanical power and work during acceleration and top speed in elite sprinters},
  series = {31 International Conference on Biomechanics in Sports, Taipei, Taiwan, July 07 - July 22, 2013},
  booktitle = {31 International Conference on Biomechanics in Sports, Taipei, Taiwan, July 07 - July 22, 2013},
  issn      = {1999-4168},
  year      = {2013},
  language  = {en}
}
@incollection{BraunerVervierBrillowskietal.2022,
  author    = {Brauner, Philipp and Vervier, Luisa and Brillowski, Florian and Dammers, Hannah and Steuer-Dankert, Linda and Schneider, Sebastian and Baier, Ralph and Ziefle, Martina and Gries, Thomas and Leicht-Scholten, Carmen and Mertens, Alexander and Nagel, Saskia K.},
  title     = {Organization Routines in Next Generation Manufacturing},
  series = {Forecasting Next Generation Manufacturing},
  booktitle = {Forecasting Next Generation Manufacturing},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-07734-0},
  doi       = {10.1007/978-3-031-07734-0_5},
  pages     = {75 -- 94},
  year      = {2022},
  abstract  = {Next Generation Manufacturing promises significant improvements in performance, productivity, and value creation. In addition to the desired and projected improvements regarding the planning, production, and usage cycles of products, this digital transformation will have a huge impact on work, workers, and workplace design. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these changes, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the organization dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we highlight seven areas in which the digital transformation of production will change how we work, how we organize the work within a company, how we evaluate these changes, and how employment and labor rights will be affected across company boundaries. The experts are unsure whether the use of collaborative robots in factories will replace traditional robots by 2030. They believe that the use of hybrid intelligence will supplement human decision-making processes in production environments. Furthermore, they predict that artificial intelligence will lead to changes in management processes, leadership, and the elimination of hierarchies. However, to ensure that social and normative aspects are incorporated into the AI algorithms, restricting measurement of individual performance will be necessary. Additionally, AI-based decision support can significantly contribute toward new, socially accepted modes of leadership. Finally, the experts believe that there will be a reduction in the workforce by the year 2030.},
  language  = {en}
}
@inproceedings{BraunHoefkenSchubaetal.2015,
  author    = {Braun, Sebastian and H{\"o}fken, Hans-Wilhelm and Schuba, Marko and Breuer, Michael},
  title     = {Forensische Sicherung von DSLRoutern},
  series = {Proceedings of D-A-CH Security 2015. St. Augustin 8. und 9. September 2015},
  booktitle = {Proceedings of D-A-CH Security 2015. St. Augustin 8. und 9. September 2015},
  pages     = {11 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{BraunChengLaietal.2019,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg},
  title     = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system},
  series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019},
  pages     = {33 -- 37},
  year      = {2019},
  language  = {en}
}
@inproceedings{BraunChengDoweyetal.2020,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems},
  series = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), Proceedings},
  booktitle = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), Proceedings},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ISIE45063.2020.9152210},
  pages     = {5 Seiten},
  year      = {2020},
  abstract  = {The increasing digitalization brings new opportunities but also puts new challenges to modern industrial systems. Software agents are one of the key technologies towards self-optimizing factories and are currently used to address the needs of cyber-physical production systems (CPPS). However their interplay in industrial settings needs to be understood better.This paper focusses on securing a cloud infrastructure for multi-agent systems for industrial sites. An industrial site contains multiple production processes that need to communicate with each other and each physical resource is abstracted with a software agent. This volatile architecture needs to be managed and protected from manipulation. The proposed infrastructure presents a security concept for TCP/IP communication between agents, machines, and external networks. It is based on open-source software and tested on a three-node edge cloud controlling a model-plant.},
  language  = {en}
}
@article{BraunChengDoweyetal.2021,
  author    = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg},
  title     = {Performance evaluation of skill-based order-assignment in production environments with multi-agent systems},
  series = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics},
  journal   = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics},
  number    = {Early Access},
  publisher = {IEEE},
  address   = {New York},
  issn      = {2687-9735},
  doi       = {10.1109/JESTIE.2021.3108524},
  year      = {2021},
  abstract  = {The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.},
  language  = {en}
}
@masterthesis{Braun2022,
  type      = {Bachelor Thesis},
  author    = {Braun, Linus},
  title     = {Faces - Lebenswerte Mobilit{\"a}t in St{\"a}dten},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {173 Seiten},
  year      = {2022},
  abstract  = {Mobilit{\"a}t stellt oftmals ein Problem in St{\"a}dten dar. Es sind Staus, Abgase, Platzmangel, die sich negativ auf die urbane Lebensqualit{\"a}t auswirken. Dies sind externe Auswirkungen der von Autos dominierten Mobilit{\"a}t. Ziel von „Faces" war es, eine effiziente und vor allem attraktive Alternative zum Automobil zu bieten. Daf{\"u}r denkt das Projekt die Straßenbahn neu. Durch kompaktes Design und die Verwendung autonomer Systeme wird eine h{\"o}here Taktung erm{\"o}glicht. Zudem werden die Bahnen flexibler und k{\"o}nnen den Einsatz am Mobilit{\"a}tsbedarf anpassen. Um den Bed{\"u}rfnissen der Fahrg{\"a}ste gerecht zu werden, l{\"a}sst sich das modulare Interior an die Reisedistanz anpassen. Hier wird ein Mobilit{\"a}tskonzept gezeichnet, das einem mit einem hoffnungsvollen Blick auf das Leben in den St{\"a}dten der Zukunft zur{\"u}ckl{\"a}sst.},
  language  = {de}
}
@misc{BraunKrafftTippkoetter2022,
  author    = {Braun, Lena and Krafft, Simone and Tippk{\"o}tter, Nils},
  title     = {Combined supercritical carbon dioxide extraction and chromatography of the algae fatty linoleic and linolenic acid},
  series = {Chemie Ingenieur Technik},
  volume    = {94},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.202255308},
  pages     = {1304},
  year      = {2022},
  abstract  = {A method for the integrated extraction and separation of fatty acids from algae using supercritical CO2 is presented. Desmodesmus obliquus and Chlorella sorokiniana were used as algae. First, a method for chromatographic separation of fatty acids of different degrees of saturation was established and optimized. Then, an integrated method for supercritical extraction was developed for both algal species. It was also verified whether prior cell disruption was beneficial for extraction. In developing the method for chromatographic separation, statistical experimental design was used to determine the optimal parameter settings. The methanol content in the mobile phase proved to be the most important parameter for successful separation of the three unsaturated fatty acids oleic acid, linoleic acid, and linolenic acid. Supercritical extraction with dried algae showed that about four times more fatty acids can be extracted from C. sorokiniana relative to the dry mass used.},
  language  = {en}
}
@incollection{BraunBouckeHankeetal.2003,
  author    = {Braun, Carsten and Boucke, Alexander and Hanke, M. and Karavas, Alexandros and Ballmann, Josef},
  title     = {Prediction of the model deformation of a high speed transport aircraft type wing by direct aeroelastic simulation},
  series = {High performance computing in science and engineering '03. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2003 / Eds.: Egon Krause ...},
  booktitle = {High performance computing in science and engineering '03. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2003 / Eds.: Egon Krause ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-40850-5},
  pages     = {331 -- 342},
  year      = {2003},
  language  = {de}
}
@incollection{BraunBouckeBallmann2005,
  author    = {Braun, Carsten and Boucke, Alexander and Ballmann, Josef},
  title     = {Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model},
  series = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  booktitle = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-22943-4},
  pages     = {225 -- 236},
  year      = {2005},
  language  = {en}
}
@inproceedings{BraunBouckeBallmann2005,
  author    = {Braun, Carsten and Boucke, Alexander and Ballmann, Josef},
  title     = {Numerical prediction of the wing deformation of a high speed transport aircraft type wind tunnel model by direct aeroelastic simulation},
  series = {Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : M{\"u}nchen, June 28 - July 1, 2005. DGLR-Bericht. 2005,04},
  booktitle = {Conference proceedings : CEAS/AIAA/DGLR International Forum on Aeroelasticity and Structural Dynamics IFASD 2005 : M{\"u}nchen, June 28 - July 1, 2005. DGLR-Bericht. 2005,04},
  publisher = {DGLR},
  address   = {Bonn},
  isbn      = {3-932182-43-X},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@book{Braun2007,
  author    = {Braun, Carsten},
  title     = {Ein modulares Verfahren f{\"u}r die numerische aeroelastische Analyse von Luftfahrzeugen},
  pages     = {VI, 199 S.},
  year      = {2007},
  abstract  = {Aachen, Techn. Hochschule, Diss., 2007},
  language  = {de}
}
@inproceedings{Braun2008,
  author    = {Braun, Carsten},
  title     = {Ein modulares Verfahren f{\"u}r die numerische aeroelastische Analyse von Luftfahrzeugen},
  series = {Motto: Wissen und Visionen f{\"u}r ein nachhaltiges Wachstum : Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008 / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). DGLR-Jahrbuch. 2008},
  booktitle = {Motto: Wissen und Visionen f{\"u}r ein nachhaltiges Wachstum : Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008 / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). DGLR-Jahrbuch. 2008},
  publisher = {DGLR},
  address   = {Bonn},
  pages     = {787 -- 796},
  year      = {2008},
  language  = {de}
}
@incollection{BrandtGueskenBuechenetal.1997,
  author    = {Brandt, D. and G{\"u}sken, J. and B{\"u}chen, W. and Wahle, Michael and Huppatz, W. and Koewius, A. and Linn, W. and Sedlaceck, G.},
  title     = {Konstruieren mit Aluminium [Kapitel 4]},
  series = {Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale D{\"u}sseldorf. - Bd. 3: Weiterverarbeitung und Anwendung},
  booktitle = {Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale D{\"u}sseldorf. - Bd. 3: Weiterverarbeitung und Anwendung},
  edition   = {15. Auflage},
  publisher = {Aluminium-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87017-243-6},
  pages     = {359 -- 544},
  year      = {1997},
  language  = {de}
}
@inproceedings{BrandiniBaumann1997,
  author    = {Brandini, Frederico P. and Baumann, Marcus},
  title     = {The potential role of melted 'brown ice' as sources of chelators and ammonia to the surface waters of the Weddell Sea, Antarctica},
  series = {Proceedings of the NIPR Symposium on Polar Biology : 10},
  booktitle = {Proceedings of the NIPR Symposium on Polar Biology : 10},
  address   = {Tokyo},
  organization    = {National Institute of Polar Research},
  issn      = {0914-563X},
  pages     = {1 -- 13},
  year      = {1997},
  language  = {en}
}
@inproceedings{BrandesGligorevicSchnelletal.2007,
  author    = {Brandes, Sinja and Gligorevic, Snjezana and Schnell, Michael and Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schlereth, Armin and Rihacek, Christoph},
  title     = {Final assessment of the B-VHF overlay concept},
  series = {IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.},
  booktitle = {IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {1-4244-0525-4},
  pages     = {1 -- 18},
  year      = {2007},
  language  = {en}
}
@inproceedings{BrandesEppleGligorevicetal.2009,
  author    = {Brandes, Sinja and Epple, U. and Gligorevic, Snjezana and Schnell, Michael and Haindl, Bernhard and Sajatovic, Miodrag},
  title     = {Physical layer specification of the L-band Digital Aeronautical Communications System (L-DACS1)},
  series = {Integrated Communications, Navigation and Surveillance Conference : ICNS '09 : 13 - 15 May 2009, Arlington, Va.},
  booktitle = {Integrated Communications, Navigation and Surveillance Conference : ICNS '09 : 13 - 15 May 2009, Arlington, Va.},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {978-1-4244-4733-6 ; 978-1-4244-4734-3},
  pages     = {1 -- 12},
  year      = {2009},
  language  = {en}
}
@article{BrahmaMusioIsmayilovaetal.2015,
  author    = {Brahma, Aischarya and Musio, Biagia and Ismayilova, Uliviya and Nikbin, Nikzad and Kamptmann, Sonja B. and Siegert, Petra and Jeromin, G{\"u}nter Erich and Ley, Steven and Pohl, Martina},
  title     = {An orthogonal biocatalytic approach for the safe generation and use of HCN in a multi-step continuous preparation of chiral O-acetylcyanohydrins},
  series = {Synlett},
  journal   = {Synlett},
  number    = {Publ. online 29.09.2015},
  publisher = {Thieme},
  address   = {Stuttgart},
  issn      = {0936-5214 (Print) ; 1437-2096 (e-Journal)},
  doi       = {10.1055/s-0035-1560644},
  year      = {2015},
  language  = {de}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@inproceedings{BragardSubeSchneideretal.2019,
  author    = {Bragard, Michael and Sube, Maike and Schneider, Maike and Jungemann, Christoph},
  title     = {Introducing a Cross-University Bachelor's Programme with Orientation Semester - Enabling a Permeable Academic Education System},
  series = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)},
  isbn      = {978-1-5386-9257-8},
  doi       = {10.1109/REM.2019.8744132},
  pages     = {1 -- 6},
  year      = {2019},
  language  = {en}
}
@article{BragardSoltauThomasetal.2010,
  author    = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.},
  title     = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems},
  series = {IEEE transactions on power electronics},
  volume    = {25},
  journal   = {IEEE transactions on power electronics},
  number    = {12},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2010.2085455},
  pages     = {3049 -- 3056},
  year      = {2010},
  abstract  = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.},
  language  = {en}
}
@inproceedings{BragardSoltauDeDonckeretal.2010,
  author    = {Bragard, Michael and Soltau, N. and De Doncker, R. W. and Schmiegel, A.},
  title     = {Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618220},
  pages     = {2944 -- 2949},
  year      = {2010},
  language  = {en}
}
@inproceedings{BragardRongeDeDoncker2011,
  author    = {Bragard, Michael and Ronge, C. and De Doncker, R. W.},
  title     = {Sandwich design of high-power thyristor based devices with integrated MOSFET structure},
  series = {Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom},
  booktitle = {Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-167-0 (Print)},
  year      = {2011},
  language  = {en}
}
@article{BragardRichter2008,
  author    = {Bragard, Michael and Richter, S. A.},
  title     = {LED-Kreisel als Praxis-Booster},
  series = {Elektor : electronics worldwide},
  volume    = {39},
  journal   = {Elektor : electronics worldwide},
  number    = {12},
  issn      = {0932-5468},
  pages     = {16},
  year      = {2008},
  language  = {de}
}
@inproceedings{BragardKoellenspergerDeDoncker2007,
  author    = {Bragard, Michael and K{\"o}llensperger, P. and De Doncker, R. W.},
  title     = {Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit},
  series = {"Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne},
  booktitle = {"Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne},
  editor    = {Dmowski, Antoni},
  publisher = {APS Energia},
  address   = {Warszawa},
  isbn      = {83-918709-7-9},
  pages     = {7.1 -- 7.9},
  year      = {2007},
  language  = {de}
}
@misc{BragardHueningKowalewski2023,
  author    = {Bragard, Michael and H{\"u}ning, Felix and Kowalewski, Paul},
  title     = {Vorrichtung zur Relativlagenbestimmung [Offenlegungschrift]},
  year      = {2023},
  abstract  = {Die Erfindung betrifft eine Vorrichtung zur Bestimmung einer Relativlage zwischen einem feststehenden Teil und einem zu demselben in eine Bewegungsrichtung bewegbaren beweglichen Teil, wobei der feststehende Teil mit einem Wiegandsensor versehen ist, wobei der Wiegandsensor zwischen zwei gegenpolig zueinander ausgebildeten Permanentmagneten angeordnet ist und dass der bewegliche Teil eine Mehrzahl von beabstandet zueinander angeordneten Magnetisierungsstegen aus einem magnetisch leitenden Material aufweist, die in der Bewegungsrichtung zumindest eine gleich große Erstreckung aufweisen wie der Permanentmagnet, dass ein Abstand zwischen benachbarten Magnetisierungsstegen derart gew{\"a}hlt ist, dass in einer ersten Relativlage ein erster Permanentmagnet von einem der Magnetisierungsstege {\"u}berdeckt ist und ein zweiter Permanentmagnet nicht von einem der Magnetisierungsstege {\"u}berdeckt ist.},
  language  = {de}
}
@inproceedings{BragardHoekHoegenetal.2018,
  author    = {Bragard, Michael and Hoek, Hauke van and Hoegen, Anne von and Doncker, Rik W. De},
  title     = {Motivation-based Learning: Teaching Fundamentals of Electrical Engineering with an LED Spinning Top},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659810},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{BragardGottschlichDeDoncker2011,
  author    = {Bragard, Michael and Gottschlich, J. and De Doncker, R. W.},
  title     = {Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure},
  series = {2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE \& ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]},
  booktitle = {2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE \& ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-958-4 (Print)},
  doi       = {10.1109/ICPE.2011.5944661},
  pages     = {1182 -- 1189},
  year      = {2011},
  language  = {en}
}
@misc{BragardDeDonckerMuraetal.2011,
  author    = {Bragard, Michael and De Doncker, R. W. and Mura, F and Dick, C.},
  title     = {Halbleiterbauelement und Verfahren zur Herstellung desselben [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Geneva},
  pages     = {10 S. / 23 S. : graph. Darst.},
  year      = {2011},
  language  = {de}
}
@article{BragardConradvanHoeketal.2011,
  author    = {Bragard, Michael and Conrad, M. and van Hoek, H. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor-based high power semiconductor device using MOS assisted turn-off},
  series = {IEEE transactions on industry applications},
  volume    = {47},
  journal   = {IEEE transactions on industry applications},
  number    = {5},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0093-9994},
  doi       = {10.1109/TIA.2011.2161432},
  pages     = {2175 -- 2182},
  year      = {2011},
  language  = {en}
}
@inproceedings{BragardConradDeDoncker2010,
  author    = {Bragard, Michael and Conrad, M. and De Doncker, R. W.},
  title     = {The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off},
  series = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  booktitle = {2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4244-5286-6 (Print)},
  doi       = {10.1109/ECCE.2010.5618410},
  pages     = {4551 -- 4557},
  year      = {2010},
  language  = {en}
}
@misc{BragardBuddeHenteetal.2008,
  author    = {Bragard, Michael and Budde, W. O. and Hente, D. and Jacobs, J. H. A. M. and Waffenschmidt, E.},
  title     = {Lighting system : [patent of invention]},
  publisher = {WIPO / United States Patent and Trademark Office},
  address   = {Geneva / Alexandria, VA},
  pages     = {32 S. : graph. Darst.},
  year      = {2008},
  language  = {en}
}
@article{BragardBragard2003,
  author    = {Bragard, Michael and Bragard, G.},
  title     = {Erweiterungen f{\"u}r das CBL2-Messinterface von Texas-Instruments},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {56},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {2},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {87 -- 88},
  year      = {2003},
  abstract  = {Das von Texas-Instruments (TI) vertriebene Interface CBL2 wird {\"u}ber einige TI-Grafik-Rechner (TI-92, TI-89 usw.) angesteuert. Wegen seiner Handlichkeit wird dieses System beim Unterricht in wechselnden R{\"a}umen »großen« Messwerterfassungssystemen oft vorgezogen. Das CBL2 bietet drei analoge Eing{\"a}nge, die immerhin mit 10 Bit Aufl{\"o}sung und bis zu einer Frequenz von 50 kHz arbeiten. Weiterhin besitzt das CBL2 eine Buchse f{\"u}r angeblich nur einen digitalen Ein- bzw. Ausgang. An diesem Eingang wird standardm{\"a}ßig haupts{\"a}chlich der Bewegungssensor CBR betrieben. In diesem Beitrag werden Erweiterungsm{\"o}glichkeiten dieses Anschlusses beschrieben.},
  language  = {de}
}
@phdthesis{Bragard2012,
  author    = {Bragard, Michael},
  title     = {The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beitr{\"a}ge des ISEA ; 62)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-1152-4},
  pages     = {III, 164 S. : Ill., graph. Darst.},
  year      = {2012},
  abstract  = {This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.},
  language  = {en}
}
@article{Bragard2008,
  author    = {Bragard, Michael},
  title     = {Effektvoller LED-Kreisel : zeigt Text wie programmiert, wenn er rotiert},
  series = {Elektor : electronics worldwide},
  volume    = {39},
  journal   = {Elektor : electronics worldwide},
  number    = {12},
  issn      = {0932-5468},
  pages     = {18 -- 23},
  year      = {2008},
  abstract  = {Wenn eine runde Platine mit LED-Zeile rotiert, entstehen leuchtende Ringe. Steuert man die LEDs mit einem Mikrocontroller an, lassen sich aber auch "stehende" Bilder darstellen. Unser elektronischer Kreisel kann Buchstaben und Ziffern anzeigen. Dabei wird das Erdmagnetfeld auf clevere Weise zur Synchronisation genutzt. Hier reichen die Anwendungen vom Rundenz{\"a}hler bis zum Kompass!},
  language  = {de}
}
@article{BragardBragard2012,
  author    = {Bragard, G. and Bragard, Michael},
  title     = {Ein kosteng{\"u}nstiges, universelles Modellbauinterface},
  series = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  volume    = {65},
  journal   = {Der mathematische und naturwissenschaftliche Unterricht : MNU ; Organ des Deutschen Vereins zur F{\"o}rderung des Mathematischen und Naturwissenschaftlichen Unterrichts e.V.},
  number    = {5},
  publisher = {Seeberger},
  address   = {Neuss},
  issn      = {0025-5866},
  pages     = {290 -- 293},
  year      = {2012},
  abstract  = {Wir stellen einen USB-Baustein vor, der eine kosteng{\"u}nstige und universelle M{\"o}glichkeit schafft , im Unterricht den Themenkreis Messen-Steuern-Regeln zu behandeln. Die Funktionalit{\"a}t orientiert sich am CVK-Interface der Firma Fischertechnik. Im Gegensatz zu kommerziellen L{\"o}sungen erlaubt unser Aufbau auch den preiswerten Einsatz in Gruppen- oder Einzelarbeit. Abschließend berichten wir {\"u}ber ein Beispiel aus dem Unterrichtseinsatz.},
  language  = {de}
}
@article{BrabandYegenPaulssenetal.2005,
  author    = {Braband, Henrik and Yegen, Eda and Paulßen, Elisabeth and Abram, Ulrich},
  title     = {[{ReN(PMe2Ph)3}{ReO3N}]2 - Structural Evidence for the Nitridotrioxorhenate(VII) Anion, [ReO3N]2-},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {631},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {12},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200500240},
  pages     = {2408 -- 2410},
  year      = {2005},
  language  = {en}
}
@article{BrabandPaulssenAbram2006,
  author    = {Braband, Henrik and Paulßen, Elisabeth and Abram, Ulrich},
  title     = {Nitridorhenium(V) Complexes with 1,3-Dialkyl-4,5-dimethylimidazole-2-ylidenes},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  volume    = {632},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie : ZAAC = Journal of inorganic and general chemistry},
  number    = {6},
  issn      = {1521-3749},
  doi       = {10.1002/zaac.200600002},
  pages     = {1051 -- 1056},
  year      = {2006},
  language  = {en}
}
@incollection{BozakovSander2013,
  author    = {Bozakov, Zdravko and Sander, Volker},
  title     = {OpenFlow: A Perspective for Building Versatile Networks},
  series = {Network-Embedded Management and Applications},
  booktitle = {Network-Embedded Management and Applications},
  publisher = {Springer},
  address   = {New York, NY},
  isbn      = {978-1-4419-6769-5},
  doi       = {10.1007/978-1-4419-6769-5_11},
  pages     = {217 -- 245},
  year      = {2013},
  language  = {en}
}
@article{BouwmanGuldenHeijdenetal.2013,
  author    = {Bouwman, Peter and Gulden, Hanneke van der and Heijden, Ingrid van der and Drost, Rinske and Klijn, Christiaan N. and Prasetyanti, Pramudita and Pieterse, Mark and Wientjens, Ellen and Seibler, Jost and Hogervorst, Frank B. L. and Jonkers, Jos},
  title     = {A High-Throughput Functional Complementation Assay for Classification of BRCA1 Missense Variants},
  series = {Cancer Discovery},
  journal   = {Cancer Discovery},
  number    = {3},
  issn      = {2159-8290},
  doi       = {10.1158/2159-8290.CD-13-0094},
  pages     = {1142 -- 1152},
  year      = {2013},
  language  = {en}
}
@incollection{BouvyKuperjans2004,
  author    = {Bouvy, C. and Kuperjans, Isabel},
  title     = {Mikro-Gasturbinen : eine neue Technologie zur Kraft-W{\"a}rme-Kopplung in kleinen und mittleren Unternehmen},
  series = {Entwicklungslinien der Energietechnik 2004},
  booktitle = {Entwicklungslinien der Energietechnik 2004},
  edition   = {CD-ROM-Ausg.},
  publisher = {VDI-Verlag},
  address   = {D{\"u}sseldorf},
  year      = {2004},
  language  = {de}
}
@article{BouquegneauKernRousseau2010,
  author    = {Bouquegneau, Christian and Kern, Alexander and Rousseau, Alain},
  title     = {Lightning safety guidelines},
  pages     = {1 -- 6},
  year      = {2010},
  language  = {en}
}
@book{BostelKleemannMelissetal.1981,
  author    = {Bostel, J{\"o}rg and Kleemann, Manfred and Meliß, Michael and Sharan, H. N.},
  title     = {Die Nutzung neuer und erneuerbarer Energiequellen in Entwicklungsl{\"a}ndern. Bd. 1: Auswertung der L{\"a}nderpapiere f{\"u}r die Konferenz der Vereinten Nationen {\"u}ber neue und erneuerbare Energiequellen, Nairobi 1981. - (Aktuelle Beitr{\"a}ge zur Energiediskussion ; Nr. 7,1. Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 177,1.},
  publisher = {Zentralbibliothek der Kernforschungsanlage J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {VII, 154 S.},
  year      = {1981},
  language  = {de}
}
@inproceedings{BosseDeClercqBarnat2018,
  author    = {Bosse, Elke and De Clercq, Mikael and Barnat, Miriam},
  title     = {The Role of Diversity for the Transition to Higher Education},
  series = {EARLI SIG 4, Giessen},
  booktitle = {EARLI SIG 4, Giessen},
  pages     = {13 Folien},
  year      = {2018},
  language  = {en}
}
@incollection{BosseBarnat2019,
  author    = {Bosse, Elke and Barnat, Miriam},
  title     = {Kombination quantitativer und qualitativer Methoden zur Untersuchung der Studieneingangsphase},
  series = {Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik},
  booktitle = {Hochschulbildungsforschung. Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik},
  editor    = {Jenert, Tobias and Reinmann, Gabi and Schmohl, Tobias},
  publisher = {Springer VS},
  address   = {Wiesbaden},
  isbn      = {978-3-658-20308-5},
  pages     = {169 -- 184},
  year      = {2019},
  language  = {de}
}
@incollection{BosseBarnat2019,
  author    = {Bosse, Elke and Barnat, Miriam},
  title     = {Kombination qualitativer und quantitativer Methoden zur Untersuchung der Studieneinstiegsphase},
  series = {Hochschulbildungsforschung : Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik},
  booktitle = {Hochschulbildungsforschung : Theoretische, methodologische und methodische Denkanst{\"o}ße f{\"u}r die Hochschuldidaktik},
  publisher = {Springer VS},
  address   = {Wiesbaden},
  isbn      = {978-3-658-20309-2},
  doi       = {10.1007/978-3-658-20309-2_10},
  pages     = {169 -- 184},
  year      = {2019},
  abstract  = {Mit Hilfe der Kombination von qualitativen und quantitativen Verfahren zielen Mixed-Methods Ans{\"a}tze darauf ab, einen vertieften Einblick in komplexe Gegenst{\"a}nde zu gewinnen. In der Hochschulbildungsforschung finden sie zunehmend Anklang, da sie besonders geeignet erscheinen, das vielschichtige Wirkungsgef{\"u}ge zu erfassen, das das Lehren und Lernen an Hochschulen auszeichnet. Der Beitrag geht den Potenzialen von Mixed-Methods Ans{\"a}tzen am Beispiel einer Studie zur Studieneingangsphase nach, die den Wirkungszusammenhang zwischen der Nutzung von Angeboten f{\"u}r den Studieneinstieg und der Entwicklung von Studierf{\"a}higkeit untersucht. Der Beitrag veranschaulicht die Integration von Methoden und Ergebnissen, um Chancen und Grenzen von Mixed-Methods Studien f{\"u}r die Hochschulbildungsforschung zu diskutieren.},
  language  = {de}
}
@masterthesis{Bos2021,
  type      = {Bachelor Thesis},
  author    = {Bos, Shania},
  title     = {Living Books: ein Event rund um das Thema Lesen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {95 Seiten},
  year      = {2021},
  abstract  = {Living Books ist ein in Aachen stationiertes Event der Buchhandlungskette Mayersche, welches Kinder und Jugendliche zum Lesen animieren soll, indem Technik und Unterhaltungsmedien mit dem Buch verbunden werden. Hierzu werden die M{\"o}glichkeiten der virtuellen Realit{\"a}t genutzt sowie einzigartige Marketingstrategien, die sich ebenfalls neuartiger Technik bedienen, um das Interesse und die Neugierde junger Menschen zu wecken. Vor Ort wird man zum ersten Mal mit dem Buch konfrontiert. Bis dahin wirkt das Event schlichtweg wie ein Fantreffen zu Buchverfilmungen. Nacheinander betreten die jungen Besucher mithilfe einer VR-Brille eine Welt, die einem Buch entstammt, um ihnen die Geschichte spielerisch n{\"a}herzubringen. Mithilfe der neuen Welt und einem pl{\"o}tzlichen Ende soll Neugierde f{\"u}r das Buch geweckt werden. Das Interesse f{\"u}r die Geschichte soll am Ende gr{\"o}ßer sein als die Abneigung gegen das Lesen.},
  language  = {de}
}
@unpublished{BornheimGriegerBlanecketal.2023,
  author    = {Bornheim, Tobias and Grieger, Niklas and Blaneck, Patrick Gustav and Bialonski, Stephan},
  title     = {Preprint: Speaker attribution in German parliamentary debates with QLoRA-adapted large language models},
  series = {Journal for Language Technology and Computational Linguistics},
  journal   = {Journal for Language Technology and Computational Linguistics},
  doi       = {10.48550/arXiv.2309.09902},
  pages     = {8 Seiten},
  year      = {2023},
  abstract  = {The growing body of political texts opens up new opportunities for rich insights into political dynamics and ideologies but also increases the workload for manual analysis. Automated speaker attribution, which detects who said what to whom in a speech event and is closely related to semantic role labeling, is an important processing step for computational text analysis. We study the potential of the large language model family Llama 2 to automate speaker attribution in German parliamentary debates from 2017-2021. We fine-tune Llama 2 with QLoRA, an efficient training strategy, and observe our approach to achieve competitive performance in the GermEval 2023 Shared Task On Speaker Attribution in German News Articles and Parliamentary Debates. Our results shed light on the capabilities of large language models in automating speaker attribution, revealing a promising avenue for computational analysis of political discourse and the development of semantic role labeling systems.},
  language  = {en}
}
@inproceedings{BornheimGriegerBialonski2021,
  author    = {Bornheim, Tobias and Grieger, Niklas and Bialonski, Stephan},
  title     = {FHAC at GermEval 2021: Identifying German toxic, engaging, and fact-claiming comments with ensemble learning},
  series = {Proceedings of the GermEval 2021 Workshop on the Identification of Toxic, Engaging, and Fact-Claiming Comments : 17th Conference on Natural Language Processing KONVENS 2021},
  booktitle = {Proceedings of the GermEval 2021 Workshop on the Identification of Toxic, Engaging, and Fact-Claiming Comments : 17th Conference on Natural Language Processing KONVENS 2021},
  publisher = {Heinrich Heine University},
  address   = {D{\"u}sseldorf},
  doi       = {10.48415/2021/fhw5-x128},
  pages     = {105 -- 111},
  year      = {2021},
  language  = {en}
}
@article{BorkKelemenBisellietal.2000,
  author    = {Bork, M. and Kelemen, C. and Biselli, Manfred and Artmann, Gerhard},
  title     = {Biophysikalische Charakterisierung ex vivo kultivierter menschlicher Erythrozythen},
  series = {Biomedizinische Technik = Biomedical Engineering. 45 (2000), H. s1},
  journal   = {Biomedizinische Technik = Biomedical Engineering. 45 (2000), H. s1},
  isbn      = {1862-278X},
  pages     = {471 -- 472},
  year      = {2000},
  language  = {de}
}
@article{BorgmeierBongaertsMeinhardt2012,
  author    = {Borgmeier, Claudia and Bongaerts, Johannes and Meinhardt, Friedhelm},
  title     = {Genetic analysis of the Bacillus licheniformis degSU operon and the impact of regulatory mutations on protease production},
  series = {Journal of biotechnology},
  volume    = {159},
  journal   = {Journal of biotechnology},
  number    = {1-2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2012.02.011},
  pages     = {12 -- 20},
  year      = {2012},
  abstract  = {Disruption experiments targeted at the Bacillus licheniformis degSU operon and GFP-reporter analysis provided evidence for promoter activity immediately upstream of degU. pMutin mediated concomitant introduction of the degU32 allele - known to cause hypersecretion in Bacillus subtilis - resulted in a marked increase in protease activity. Application of 5-fluorouracil based counterselection through establishment of a phosphoribosyltransferase deficient Δupp strain eventually facilitated the marker-free introduction of degU32 leading to further protease enhancement achieving levels as for hypersecreting wild strains in which degU was overexpressed. Surprisingly, deletion of rapG - known to interfere with DegU DNA-binding in B. subtilis - did not enhance protease production neither in the wild type nor in the degU32 strain. The combination of degU32 and Δupp counterselection in the type strain is not only equally effective as in hypersecreting wild strains with respect to protease production but furthermore facilitates genetic strain improvement aiming at biological containment and effectiveness of biotechnological processes.},
  language  = {en}
}
@inproceedings{BorggraefeDachwald2010,
  author    = {Borggr{\"a}fe, Andreas and Dachwald, Bernd},
  title     = {Mission performance evaluation for solar sails using a refined SRP force model with variable optical coefficients},
  series = {2nd International Symposium on Solar Sailing},
  booktitle = {2nd International Symposium on Solar Sailing},
  pages     = {1 -- 6},
  year      = {2010},
  abstract  = {Solar sails provide ignificant advantages over other low-thrust propulsion systems because they produce thrust by the momentum exchange from solar radiation pressure (SRP) and thus do not consume any propellant.The force exerted on a very thin sail foil basically depends on the light incidence angle. Several analytical SRP force models that describe the SRP force acting on the sail have been established since the 1970s. All the widely used models use constant optical force coefficients of the reflecting sail material. In 2006,MENGALI et al. proposed a refined SRP force model that takes into account the dependancy of the force coefficients on the light incident angle,the sail's distance from the sun (and thus the sail emperature) and the surface roughness of the sail material [1]. In this paper, the refined SRP force model is compared to the previous ones in order to identify the potential impact of the new model on the predicted capabilities of solar sails in performing low-cost interplanetary space missions. All force models have been implemented within InTrance, a global low-thrust trajectory optimization software utilizing evolutionary neurocontrol [2]. Two interplanetary rendezvous missions, to Mercury and the near-Earth asteroid 1996FG3, are investigated. Two solar sail performances in terms of characteristic acceleration are examined for both scenarios, 0.2 mm/s2 and 0.5 mm/s2, termed "low" and "medium" sail performance. In case of the refined SRP model, three different values of surface roughness are chosen, h = 0 nm, 10 nm and 25 nm. The results show that the refined SRP force model yields shorter transfer times than the standard model.},
  language  = {en}
}
@incollection{BorggrafeOhndorfDachwaldetal.2012,
  author    = {Borggrafe, Andreas and Ohndorf, Andreas and Dachwald, Bernd and Seboldt, Wolfgang},
  title     = {Analysis of interplanetary solar sail trajectories with attitude dynamics},
  series = {Dynamics and Control of Space Systems 2012},
  booktitle = {Dynamics and Control of Space Systems 2012},
  publisher = {Univelt Inc},
  address   = {San Diego},
  isbn      = {978-0-87703-587-9},
  pages     = {1553 -- 1569},
  year      = {2012},
  abstract  = {We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system.},
  language  = {en}
}
@incollection{BorchertTenbrake2020,
  author    = {Borchert, J{\"o}rg and Tenbrake, Andre},
  title     = {Bewirtschaftung von Flexibilit{\"a}t {\"u}ber Microservices eines Plattformanbieters},
  series = {Realisierung Utility 4.0 Band 1},
  booktitle = {Realisierung Utility 4.0 Band 1},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-25332-5},
  doi       = {10.1007/978-3-658-25332-5_37},
  pages     = {615 -- 626},
  year      = {2020},
  abstract  = {Die Energiewirtschaft befindet sich in einem starken Wandel, der v. a. durch die Energiewende und Digitalisierung Druck auf s{\"a}mtliche Marktteilnehmer aus{\"u}bt. Das klassische Gesch{\"a}ftsmodell des Energieversorgungsunternehmens ver{\"a}ndert sich dabei grundlegend. Der kontinuierlich ansteigende Einsatz dezentraler und volatiler Erzeugungsanlagen macht die Identifikation von Flexibilit{\"a}tspotenzialen notwendig, um weiterhin eine hohe Versorgungssicherheit zu gew{\"a}hrleisten. Dieser Schritt ist nur mit einem hohen Digitalisierungsgrad m{\"o}glich. Eine funktionale Plattform mit Microservices, die zu Gesch{\"a}ftsprozessen verbunden werden k{\"o}nnen, wird als M{\"o}glichkeit zur Aktivierung der Flexibilit{\"a}t und Digitalisierung der Energieversorgungsunternehmen im Folgenden vorgestellt.},
  language  = {de}
}
@book{BorchertSchemmKorth2006,
  author    = {Borchert, J{\"o}rg and Schemm, Ralf and Korth, Swen},
  title     = {Stromhandel: Institutionen, Marktmodelle, Pricing und Risikomanagement},
  publisher = {Sch{\"a}ffer-Poeschel},
  address   = {Stuttgart},
  isbn      = {978-3-7910-2542-1},
  pages     = {XXIII, 426 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {de}
}
@incollection{BorchertSchemmLintzel2005,
  author    = {Borchert, J{\"o}rg and Schemm, R. and Lintzel, P.},
  title     = {Risiken des Handelsgesch{\"a}ftes},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, Ines},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {3-406-52443-5},
  pages     = {218 -- 235},
  year      = {2005},
  language  = {de}
}
@article{BorchertSchemm2007,
  author    = {Borchert, J{\"o}rg and Schemm, R.},
  title     = {Einsatz der Portfoliotheorie im Asset Allokations-Prozess am Beispiel eines fiktiven Anlageraumes von Windkraftstandorten},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {31},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {4},
  issn      = {0343-5377},
  pages     = {311},
  year      = {2007},
  language  = {de}
}
@incollection{BorchertRothe2016,
  author    = {Borchert, J{\"o}rg and Rothe, Sebastian},
  title     = {Energiemanagement und Versorgung von Chemieparks - Ein Ansatz zur wertsch{\"o}pfungsgetriebenen Risikosteuerung},
  series = {Chemiestandorte : Markt, Herausforderungen und Gesch{\"a}ftsmodelle},
  booktitle = {Chemiestandorte : Markt, Herausforderungen und Gesch{\"a}ftsmodelle},
  editor    = {Suntrop, Carsten},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  isbn      = {978-3-527-33441-4},
  pages     = {193 -- 210},
  year      = {2016},
  language  = {de}
}
@incollection{BorchertMichels2012,
  author    = {Borchert, J{\"o}rg and Michels, A.},
  title     = {Beschaffungsstrategien an der Schnittstelle Energiehandel / Vertrieb},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, ines},
  edition   = {3. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-63237-2},
  pages     = {508 -- 522},
  year      = {2012},
  language  = {de}
}
@incollection{BorchertLintzel2012,
  author    = {Borchert, J{\"o}rg and Lintzel, P.},
  title     = {Risiken des Handels},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, Ines},
  edition   = {3. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-9813142-9-8},
  pages     = {303 -- 312},
  year      = {2012},
  language  = {de}
}
@incollection{BorchertHintze2009,
  author    = {Borchert, J{\"o}rg and Hintze, D.},
  title     = {Der Aufbau von Handelseinheiten},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, Ines},
  edition   = {2. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-58373-5},
  pages     = {393 -- 410},
  year      = {2009},
  language  = {de}
}
@article{BorchertHasenbeckJungbluthetal.2009,
  author    = {Borchert, J{\"o}rg and Hasenbeck, Marc and Jungbluth, Christian and Schemm, Ralf},
  title     = {Bewertung und Steuerung von Gasspeichern bzw. Gasspeicherscheiben},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {33},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1866-2765},
  doi       = {10.1007/s12398-009-0033-x},
  pages     = {279 -- 293},
  year      = {2009},
  abstract  = {In diesem Artikel werden zun{\"a}chst einleitend der Gasmarkt Deutschland und der sich daraus ergebende Speicherbedarf skizziert. Folgend wird auf verschiedene Speichernutzen aus betriebswirtschaftlicher Perspektive eingegangen und die in diesem Artikel vorgestellten Bewertungsverfahren einleitend beschrieben. In diesem Artikel werden stochastische Optimierungsmethoden aufgegriffen, die sowohl eine Bewertung der Speicher gegen{\"u}ber einem Spotpreis, als auch gegen{\"u}ber einer gesamten Forwardcurve erm{\"o}glichen. Hierzu werden zun{\"a}chst Modelle zur Beschreibung der Marktpreise vorgestellt und anhand empirischer Daten kalibriert. Dann wird eine beispielhafte Speicherscheibe zun{\"a}chst auf Basis der LeastSquareMonteCarloTechnik gegen{\"u}ber dem stochastischen mehrfaktoriellen Spotpreismodell bewertet. Hieran schließt sich die Vorstellung der Bewertung sowie des Hedgings gegen{\"u}ber der Forwardcurve an. Abschließend erfolgt eine vergleichende Gegen{\"u}berstellung beider Verfahren.},
  language  = {de}
}
@article{BorchertHasenbeck2009,
  author    = {Borchert, J{\"o}rg and Hasenbeck, Marc},
  title     = {Bewertung und Steuerung von Kraftwerksscheiben},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {33},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {2},
  publisher = {Vieweg},
  address   = {Wiesbaden},
  issn      = {1866-2765},
  doi       = {10.1007/s12398-009-0014-0},
  pages     = {115 -- 126},
  year      = {2009},
  language  = {de}
}
@incollection{BorchertBremen2014,
  author    = {Borchert, J{\"o}rg and Bremen, Frank},
  title     = {Gesch{\"a}fts- und Organisationsmodelle f{\"u}r ein Strom- und Gas-Portfoliomanagement},
  series = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche},
  booktitle = {Optimierte Strom- und Gasbeschaffung in der Energiewirtschaftsbranche},
  publisher = {KS-Energy-Verl.},
  address   = {Berlin},
  isbn      = {978-3-9813142-9-8},
  pages     = {11 -- 28},
  year      = {2014},
  language  = {de}
}
@phdthesis{Borchert2003,
  author    = {Borchert, J{\"o}rg},
  title     = {Analyse von Determinanten der Großhandelspreise f{\"u}r Elektrizit{\"a}t anhand einer Systemstudie des deutschen Marktes},
  year      = {2003},
  language  = {de}
}
@article{Borchert2003,
  author    = {Borchert, J{\"o}rg},
  title     = {Von Beschaffern und Spekulanten},
  series = {Energie \& Management},
  journal   = {Energie \& Management},
  number    = {3},
  issn      = {0945-8794},
  pages     = {16 -- 17},
  year      = {2003},
  language  = {de}
}
@incollection{Borchert2012,
  author    = {Borchert, J{\"o}rg},
  title     = {Aufbau von Handelseinheiten},
  series = {Energiehandel in Europa},
  booktitle = {Energiehandel in Europa},
  editor    = {Zenke, Ines},
  edition   = {3. Aufl.},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  isbn      = {978-3-406-63237-2},
  pages     = {467 -- 479},
  year      = {2012},
  language  = {de}
}