@article{StulpeGudderHagler1988,
  author    = {Stulpe, Werner and Gudder, S. and Hagler, J.},
  title     = {An Uncertainty Relation for Joint Position-Momentum Measurements},
  series = {Foundations of Physics Letters. 1 (1988), H. 3},
  journal   = {Foundations of Physics Letters. 1 (1988), H. 3},
  isbn      = {1572-9524},
  pages     = {287 -- 292},
  year      = {1988},
  language  = {en}
}
@article{PhamStaat2013,
  author    = {Pham, Phu Tinh and Staat, Manfred},
  title     = {An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {71 -- 87},
  year      = {2013},
  language  = {en}
}
@article{CheenakulaHoffstadtKrafftetal.2022,
  author    = {Cheenakula, Dheeraja and Hoffstadt, Kevin and Krafft, Simone and Reinecke, Diana and Klose, Holger and Kuperjans, Isabel and Gr{\"o}mping, Markus},
  title     = {Anaerobic digestion of algal-bacterial biomass of an Algal Turf Scrubber system},
  series = {Biomass Conversion and Biorefinery},
  volume    = {13},
  journal   = {Biomass Conversion and Biorefinery},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2190-6823},
  doi       = {10.1007/s13399-022-03236-z},
  pages     = {15 Seiten},
  year      = {2022},
  abstract  = {This study investigated the anaerobic digestion of an algal-bacterial biofilm grown in artificial wastewater in an Algal Turf Scrubber (ATS). The ATS system was located in a greenhouse (50°54′19ʺN, 6°24′55ʺE, Germany) and was exposed to seasonal conditions during the experiment period. The methane (CH4) potential of untreated algal-bacterial biofilm (UAB) and thermally pretreated biofilm (PAB) using different microbial inocula was determined by anaerobic batch fermentation. Methane productivity of UAB differed significantly between microbial inocula of digested wastepaper, a mixture of manure and maize silage, anaerobic sewage sludge, and percolated green waste. UAB using sewage sludge as inoculum showed the highest methane productivity. The share of methane in biogas was dependent on inoculum. Using PAB, a strong positive impact on methane productivity was identified for the digested wastepaper (116.4\%) and a mixture of manure and maize silage (107.4\%) inocula. By contrast, the methane yield was significantly reduced for the digested anaerobic sewage sludge (50.6\%) and percolated green waste (43.5\%) inocula. To further evaluate the potential of algal-bacterial biofilm for biogas production in wastewater treatment and biogas plants in a circular bioeconomy, scale-up calculations were conducted. It was found that a 0.116 km2 ATS would be required in an average municipal wastewater treatment plant which can be viewed as problematic in terms of space consumption. However, a substantial amount of energy surplus (4.7-12.5 MWh a-1) can be gained through the addition of algal-bacterial biomass to the anaerobic digester of a municipal wastewater treatment plant. Wastewater treatment and subsequent energy production through algae show dominancy over conventional technologies.},
  language  = {en}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Analyse der Antwortzeit von zuverl{\"a}ssigen Multicast-Protokollen im Internet},
  series = {Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]},
  journal   = {Multicast - Protokolle und Anwendungen : 20. - 21. Mai 1999, Braunschweig; 1. GI-Workshop / [Workshop-Leitung: Martina Zitterbart ...]},
  address   = {Braunschweig},
  pages     = {1 -- 14},
  year      = {1999},
  language  = {en}
}
@article{OrzadaBitzJohstetal.2017,
  author    = {Orzada, Stephan and Bitz, Andreas and Johst, S{\"o}ren and Gratz, Marcel and V{\"o}lker, Maximilian N. and Kraff, Oliver and Abuelhaija, Ashraf and Fiedler, Thomas M. and Solbach, Klaus and Quick, Harald H. and Ladd, Mark E.},
  title     = {Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI},
  series = {Frontiers in Physics},
  volume    = {5},
  journal   = {Frontiers in Physics},
  number    = {Jun},
  issn      = {2296-424X},
  doi       = {10.3389/fphy.2017.00017},
  year      = {2017},
  language  = {en}
}
@article{MuribTranCeunincketal.2012,
  author    = {Murib, Mohammed S. and Tran, Anh Quang and Ceuninck, Ward de and Sch{\"o}ning, Michael Josef and Nesladek, Milos and Serpeng{\"u}zel, Ali and Wagner, Patrick},
  title     = {Analysis of an optical biosensor based on elastic light scattering from diamond-, glass-, and sapphire microspheres},
  series = {Physica Status Solidi A},
  volume    = {209},
  journal   = {Physica Status Solidi A},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201100795},
  pages     = {1804 -- 1810},
  year      = {2012},
  abstract  = {Deoxyribonucleic acid (DNA) and protein recognition are now standard tools in biology. In addition, the special optical properties of microsphere resonators expressed by the high quality factor (Q-factor) of whispering gallery modes (WGMs) or morphology dependent resonances (MDRs) have attracted the attention of the biophotonic community. Microsphere-based biosensors are considered as powerful candidates to achieve label-free recognition of single molecules due to the high sensitivity of their WGMs. When the microsphere surface is modified with biomolecules, the effective refractive index and the effective size of the microsphere change resulting in a resonant wavelength shift. The transverse electric (TE) and the transverse magnetic (TM) elastic light scattering intensity of electromagnetic waves at 600 and 1400 nm are numerically calculated for DNA and unspecific binding of proteins to the microsphere surface. The effect of changing the optical properties was studied for diamond (refractive index 2.34), glass (refractive index 1.50), and sapphire (refractive index 1.75) microspheres with a 50 µm radius. The mode spacing, the linewidth of WGMs, and the shift of resonant wavelength due to the change in radius and refractive index, were analyzed by numerical simulations. Preliminary results of unspecific binding of biomolecules are presented. The calculated shift in WGMs can be used for biomolecules detection.},
  language  = {en}
}
@article{MaurerRiekeSchemmetal.2023,
  author    = {Maurer, Florian and Rieke, Christian and Schemm, Ralf and Stollenwerk, Dominik},
  title     = {Analysis of an urban grid with high photovoltaic and e-mobility penetration},
  series = {Energies},
  volume    = {16},
  journal   = {Energies},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en16083380},
  pages     = {18 Seiten},
  year      = {2023},
  abstract  = {This study analyses the expected utilization of an urban distribution grid under high penetration of photovoltaic and e-mobility with charging infrastructure on a residential level. The grid utilization and the corresponding power flow are evaluated, while varying the control strategies and photovoltaic installed capacity in different scenarios. Four scenarios are used to analyze the impact of e-mobility. The individual mobility demand is modelled based on the largest German studies on mobility "Mobilit{\"a}t in Deutschland", which is carried out every 5 years. To estimate the ramp-up of photovoltaic generation, a potential analysis of the roof surfaces in the supply area is carried out via an evaluation of an open solar potential study. The photovoltaic feed-in time series is derived individually for each installed system in a resolution of 15 min. The residential consumption is estimated using historical smart meter data, which are collected in London between 2012 and 2014. For a realistic charging demand, each residential household decides daily on the state of charge if their vehicle requires to be charged. The resulting charging time series depends on the underlying behavior scenario. Market prices and mobility demand are therefore used as scenario input parameters for a utility function based on the current state of charge to model individual behavior. The aggregated electricity demand is the starting point of the power flow calculation. The evaluation is carried out for an urban region with approximately 3100 residents. The analysis shows that increased penetration of photovoltaics combined with a flexible and adaptive charging strategy can maximize PV usage and reduce the need for congestion-related intervention by the grid operator by reducing the amount of kWh charged from the grid by 30\% which reduces the average price of a charged kWh by 35\% to 14 ct/kWh from 21.8 ct/kWh without PV optimization. The resulting grid congestions are managed by implementing an intelligent price or control signal. The analysis took place using data from a real German grid with 10 subgrids. The entire software can be adapted for the analysis of different distribution grids and is publicly available as an open-source software library on GitHub.},
  language  = {en}
}
@article{WangDruckenmuellerElbersetal.2014,
  author    = {Wang, Ren-Qi and Druckenm{\"u}ller, Katharina and Elbers, Gereon and Guenther, Klaus and Crou{\´e}, Jean-Philippe},
  title     = {Analysis of aquatic-phase natural organic matter by optimized LDI-MS method},
  series = {Journal of mass spectrometry},
  volume    = {49},
  journal   = {Journal of mass spectrometry},
  number    = {2},
  publisher = {Wiley},
  address   = {Bognor Regis},
  issn      = {1096-9888},
  doi       = {10.1002/jms.3321},
  pages     = {154 -- 160},
  year      = {2014},
  abstract  = {The composition and physiochemical properties of aquatic-phase natural organic matter (NOM) are most important problems for both environmental studies and water industry. Laser desorption/ionization (LDI) mass spectrometry facilitated successful examinations of NOM, as humic and fulvic acids in NOM are readily ionized by the nitrogen laser. In this study, hydrophobic NOMs (HPO NOMs) from river, reservoir and waste water were characterized by this technique. The effect of analytical variables like concentration, solvent composition and laser energy was investigated. The exact masses of small molecular NOM moieties in the range of 200-1200 m/z were determined in reflectron mode. In addition, spectra of post-source-decay experiments in this range showed that some compounds from different natural NOMs had the same fragmental ions. In the large mass range of 1200-15 000 Da, macromolecules and their aggregates were found in HPO NOMs from natural waters. Highly humic HPO exhibited mass peaks larger than 8000 Da. On the other hand, the waste water and reservoir water mainly had relatively smaller molecules of about 2000 Da. The LDI-MS measurements indicated that highly humic river waters were able to form large aggregates and membrane foulants, while the HPO NOMs from waste water and reservoir water were unlikely to form large aggregates. Copyright © 2014 John Wiley \& Sons, Ltd.},
  language  = {en}
}
@article{HeidenTurekSchoening2011,
  author    = {Heiden, W. and Turek, M. and Sch{\"o}ning, Michael Josef},
  title     = {Analysis of chemical sensor data},
  series = {Proceedings of the 4th Russian-German Workshop "Innovation Information Technologies: Theory and practice" : Ufa, Russia, April 8-13, 2011 / eds. Yupsova, Nafisa ...},
  journal   = {Proceedings of the 4th Russian-German Workshop "Innovation Information Technologies: Theory and practice" : Ufa, Russia, April 8-13, 2011 / eds. Yupsova, Nafisa ...},
  publisher = {State Aviation Technical Univ.},
  address   = {Ufa},
  isbn      = {978-5-4221-0159-7},
  pages     = {76 -- 81},
  year      = {2011},
  language  = {en}
}
@article{ButenwegRosinHoller2017,
  author    = {Butenweg, Christoph and Rosin, Julia and Holler, Stefan},
  title     = {Analysis of cylindrical granular material silos under seismic excitation},
  series = {Buildings},
  volume    = {7},
  journal   = {Buildings},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2075-5309},
  doi       = {10.3390/buildings7030061},
  pages     = {1 -- 12},
  year      = {2017},
  abstract  = {Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil-structure interaction effects are taken into account.},
  language  = {en}
}
@article{GhoschBaierSchuetzetal.2016,
  author    = {Ghosch, S. and Baier, M. and Sch{\"u}tz, J. and Schneider, Felix and Scherer, Ulrich W.},
  title     = {Analysis of electronic autoradiographs by mathematical post-processing},
  series = {Radiation Effects and Defects in Solids: Incorporating plasma science and plasma technology},
  volume    = {171},
  journal   = {Radiation Effects and Defects in Solids: Incorporating plasma science and plasma technology},
  number    = {1-2},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1029-4953},
  doi       = {10.1080/10420150.2016.1155587},
  pages     = {161 -- 172},
  year      = {2016},
  abstract  = {Autoradiography is a well-established method of nuclear imaging. When different radionuclides are present simultaneously, additional processing is needed to distinguish distributions of radionuclides. In this work, a method is presented where aluminium absorbers of different thickness are used to produce images with different cut-off energies. By subtracting images pixel-by-pixel one can generate images representing certain ranges of β-particle energies. The method is applied to the measurement of irradiated reactor graphite samples containing several radionuclides to determine the spatial distribution of these radionuclides within pre-defined energy windows. The process was repeated under fixed parameters after thermal treatment of the samples. The greyscale images of the distribution after treatment were subtracted from the corresponding pre-treatment images. Significant changes in the intensity and distribution of radionuclides could be observed in some samples. Due to the thermal treatment parameters the most significant differences were observed in the ³H and ¹⁴C inventory and distribution.},
  language  = {en}
}
@article{Schuba1999,
  author    = {Schuba, Marko},
  title     = {Analysis of Feedback Error Control Schemes for Block Based Video Communication / Meggers, Jens ; Schuba, Marko},
  year      = {1999},
  language  = {en}
}
@article{BiselliKlyushnichenkoRodenbrocketal.1998,
  author    = {Biselli, Manfred and Klyushnichenko, Vadim and Rodenbrock, Anja and Th{\"o}mmes, J{\"o}rg},
  title     = {Analysis of Hybridoma Cell Culture Processes by SDS-Gel Capillary Electrophoresis and matrix-assisted laser desorption ionization-time-of-flight MS / Vadim Klyushnichenko, Anja Rodenbrock, J{\"o}rg Th{\"o}mmes, Maria-Regina Kula, Holger Heine, Manfred Biselli},
  series = {Biotechnology and Applied Biochemistry. 27 (1998), H. 3},
  journal   = {Biotechnology and Applied Biochemistry. 27 (1998), H. 3},
  isbn      = {0885-4513},
  pages     = {181 -- 188},
  year      = {1998},
  language  = {en}
}
@article{SchererSantanaMaieretal.2009,
  author    = {Scherer, Ulrich W. and Santana, H. H. S. and Maier, G. and Rodenas, J.},
  title     = {Analysis of mechanical strength in ceramic pellets of nuclear fuel / Santana, H. H. S. ; Maier, G. ; Scherer, U. W. ; Rodenas, J.},
  series = {Radiation effects and defects in solids. 164 (2009), H. 5-6},
  journal   = {Radiation effects and defects in solids. 164 (2009), H. 5-6},
  publisher = {Taylor \& Francis},
  address   = {London},
  isbn      = {1042-0150},
  pages     = {313 -- 318},
  year      = {2009},
  language  = {en}
}
@article{VuStaatTran2007,
  author    = {Vu, Duc Khoi and Staat, Manfred and Tran, Ich Thinh},
  title     = {Analysis of pressure equipment by application of the primal-dual theory of shakedown},
  series = {Communications in Numerical Methods in Engineering. 23 (2007), H. 3},
  journal   = {Communications in Numerical Methods in Engineering. 23 (2007), H. 3},
  isbn      = {1069-8299},
  pages     = {213 -- 225},
  year      = {2007},
  language  = {en}
}
@article{PrumePeterRuedigeretal.2005,
  author    = {Prume, Klaus and Peter, F. and R{\"u}diger, A. and Dittmann, R.},
  title     = {Analysis of shape effects on the piezoresponse in ferroelectric nanograins with and without adsorbates / Peter, F. ; R{\"u}diger, A. ; Dittmann, R. ; Waser, R. ; Szot, K. ; Reichenberg, B. ; Prume, K. ;},
  series = {Applied Physics Letters . 87 (2005), H. 8},
  journal   = {Applied Physics Letters . 87 (2005), H. 8},
  isbn      = {0003-6951},
  pages     = {082901 -- 082901-3},
  year      = {2005},
  language  = {en}
}
@article{LeversStaatLaack2016,
  author    = {Levers, A. and Staat, Manfred and Laack, Walter van},
  title     = {Analysis of the long-term effect of the MBST® nuclear magnetic resonance therapy on gonarthrosis},
  series = {Orthopedic Practice},
  volume    = {47},
  journal   = {Orthopedic Practice},
  number    = {11},
  pages     = {521 -- 528},
  year      = {2016},
  language  = {en}
}
@article{AyalaHarrisKleefeldetal.2023,
  author    = {Ayala, Rafael Ceja and Harris, Isaac and Kleefeld, Andreas and Pallikarakis, Nikolaos},
  title     = {Analysis of the transmission eigenvalue problem with two conductivity parameters},
  series = {Applicable Analysis},
  journal   = {Applicable Analysis},
  publisher = {Taylor \& Francis},
  issn      = {0003-6811},
  doi       = {10.1080/00036811.2023.2181167},
  pages     = {37 Seiten},
  year      = {2023},
  abstract  = {In this paper, we provide an analytical study of the transmission eigenvalue problem with two conductivity parameters. We will assume that the underlying physical model is given by the scattering of a plane wave for an isotropic scatterer. In previous studies, this eigenvalue problem was analyzed with one conductive boundary parameter whereas we will consider the case of two parameters. We prove the existence and discreteness of the transmission eigenvalues as well as study the dependence on the physical parameters. We are able to prove monotonicity of the first transmission eigenvalue with respect to the parameters and consider the limiting procedure as the second boundary parameter vanishes. Lastly, we provide extensive numerical experiments to validate the theoretical work.},
  language  = {en}
}
@article{MourzinaErmelenkoYoshinobuetal.2003,
  author    = {Mourzina, Y. G. and Ermelenko, Y. E. and Yoshinobu, T. and Vlasov, Y. and Iwasaki, H. and Sch{\"o}ning, Michael Josef},
  title     = {Anionselective light-addressable potentiometric sensors (LAPS) for the determination of nitrate and suphate ions},
  series = {Sensors and Actuators B. 91 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 91 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {32 -- 38},
  year      = {2003},
  language  = {en}
}
@article{BarsovBechstedtHardt2001,
  author    = {Barsov, S. and Bechstedt, U. and Hardt, Arno},
  title     = {ANKE, a new facility for medium energy hadron physics at COSY-J{\"u}lich / S. Barsov [u.a.]},
  series = {Nuclear instruments and methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Vol. 462, iss. 3},
  journal   = {Nuclear instruments and methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Vol. 462, iss. 3},
  issn      = {0167-5087 (Print) ; 0168-9002 (E-journal)},
  pages     = {364 -- 381},
  year      = {2001},
  language  = {en}
}
@article{FoersterDarmoDubeckyetal.1996,
  author    = {F{\"o}rster, Arnold and Darmo, J. and Dubeck{\´y}, F. and Kordos, P.},
  title     = {Annealing characteristics of native defects in low-temperature-grown MBE GaAs / J. Darmo ; F. Dubecky ; P. Kordos ; A. F{\"o}rster},
  series = {Semiconducting and insulating materials 1996 : proceedings of the 9th Conference on Semiconducting and Insulating Materials (SIMC '9), April 29 - May 3, 1996, Toulouse, France / [IEEE]},
  journal   = {Semiconducting and insulating materials 1996 : proceedings of the 9th Conference on Semiconducting and Insulating Materials (SIMC '9), April 29 - May 3, 1996, Toulouse, France / [IEEE]},
  address   = {Piscataway, NJ [u.a.]},
  isbn      = {0-7803-3095-1},
  pages     = {67 -- ff.},
  year      = {1996},
  language  = {en}
}
@article{FoersterDarmoDubeckyetal.1998,
  author    = {F{\"o}rster, Arnold and Darmo, J. and Dubecky, F. and Kordos, P.},
  title     = {Annealing effect on concentration of EL6-like deep-level state in low-temperature-grown molecular beam epitaxial GaAs. Darmo, J.; Dubecky, F.; Kordos, P.; F{\"o}rster, A.},
  series = {Applied Physics Letters. 72 (1998), H. 5},
  journal   = {Applied Physics Letters. 72 (1998), H. 5},
  isbn      = {1077-3118},
  pages     = {590 -- 592},
  year      = {1998},
  language  = {en}
}
@article{SavitskayaKistaubayevaIgnatovaetal.2019,
  author    = {Savitskaya, I.S. and Kistaubayeva, A.S. and Ignatova, L.V. and Digel, Ilya},
  title     = {Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells},
  series = {Heliyon},
  volume    = {5},
  journal   = {Heliyon},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2405-8440},
  doi       = {10.1016/j.heliyon.2019.e02592},
  pages     = {Artikelnummer e02592},
  year      = {2019},
  language  = {en}
}
@article{PoghossianSchultzeSchoening2003,
  author    = {Poghossian, Arshak and Schultze, J. W. and Sch{\"o}ning, Michael Josef},
  title     = {Application of a (bio-)chemical sensor (ISFET) for the detection of physical parameters in liquids},
  series = {Electrochimica Acta. 48 (2003), H. 20-22},
  journal   = {Electrochimica Acta. 48 (2003), H. 20-22},
  pages     = {3289 -- 3297},
  year      = {2003},
  language  = {en}
}
@article{HelsperNiessner1985,
  author    = {Helsper, Christoph and Nießner, R.},
  title     = {Application of a Multistep Condensation Nuclei Counter as a Detector for Particle Surface Composition / Nießner, R. ; Helsper, C.},
  series = {Journal of Aerosol Science. 16 (1985), H. 3},
  journal   = {Journal of Aerosol Science. 16 (1985), H. 3},
  isbn      = {0021-8502},
  pages     = {201 -- 209},
  year      = {1985},
  language  = {en}
}
@article{HelsperNiessnerRoenicke1984,
  author    = {Helsper, Christoph and Nießner, R. and R{\"o}nicke, G.},
  title     = {Application of a Multistep Condensation Nuclei Counter as a Detector for Particle Surface Composition / Nießner, R.; Helsper, C.; R{\"o}nicke, G.},
  series = {Aerosols : science, technology, and industr. applications of airborne particles ; proceedings of the 1. Internat. Aerosol Conference held Sept. 17-21, 1984, Minneapolis, Minn., U.S.A / ed.: Benjamin Y. H. Liu},
  journal   = {Aerosols : science, technology, and industr. applications of airborne particles ; proceedings of the 1. Internat. Aerosol Conference held Sept. 17-21, 1984, Minneapolis, Minn., U.S.A / ed.: Benjamin Y. H. Liu},
  publisher = {Elsevier},
  address   = {New York [u.a.]},
  isbn      = {0444009477},
  pages     = {63 -- 66},
  year      = {1984},
  language  = {en}
}
@article{SchmitzSpicherKollmeier1988,
  author    = {Schmitz, G{\"u}nter and Spicher, U. and Kollmeier, H.P.},
  title     = {Application of a New Optical-Fiber Technique for Flame Propagation Diagnostics in IC Engines},
  year      = {1988},
  language  = {en}
}
@article{PilasYaziciSelmeretal.2018,
  author    = {Pilas, Johanna and Yazici, Y. and Selmer, Thorsten and Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Application of a portable multi-analyte biosensor for organic acid determination in silage},
  series = {Sensors},
  volume    = {18},
  journal   = {Sensors},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s18051470},
  pages     = {12 Seiten},
  year      = {2018},
  abstract  = {Multi-analyte biosensors may offer the opportunity to perform cost-effective and rapid analysis with reduced sample volume, as compared to electrochemical biosensing of each analyte individually. This work describes the development of an enzyme-based biosensor system for multi-parametric determination of four different organic acids. The biosensor array comprises five working electrodes for simultaneous sensing of ethanol, formate, d-lactate, and l-lactate, and an integrated counter electrode. Storage stability of the biosensor was evaluated under different conditions (stored at +4 °C in buffer solution and dry at -21 °C, +4 °C, and room temperature) over a period of 140 days. After repeated and regular application, the individual sensing electrodes exhibited the best stability when stored at -21 °C. Furthermore, measurements in silage samples (maize and sugarcane silage) were conducted with the portable biosensor system. Comparison with a conventional photometric technique demonstrated successful employment for rapid monitoring of complex media.},
  language  = {en}
}
@article{MiyamatoSakakitaWagneretal.2015,
  author    = {Miyamato, Ko-ichiro and Sakakita, Sakura and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface},
  series = {Electrochimica Acta},
  volume    = {183},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2015.07.184},
  pages     = {137 -- 142},
  year      = {2015},
  abstract  = {The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.},
  language  = {en}
}
@article{PoghossianBaadeEmonsetal.2001,
  author    = {Poghossian, Arshak and Baade, A. and Emons, H. and Sch{\"o}ning, Michael Josef},
  title     = {Application of ISFET for pH measurements in rain droplets},
  series = {Sensors and Actuators B. 76 (2001), H. 1-3},
  journal   = {Sensors and Actuators B. 76 (2001), H. 1-3},
  isbn      = {0925-4005},
  pages     = {634 -- 638},
  year      = {2001},
  language  = {en}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@article{PieperKlein2012,
  author    = {Pieper, Martin and Klein, Peter},
  title     = {Application of simple, periodic homogenization techniques to non-linear heat conduction problems in non-periodic, porous media},
  series = {Heat mass transfer},
  volume    = {48},
  journal   = {Heat mass transfer},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0947-7411},
  doi       = {10.1007/s00231-011-0879-4},
  pages     = {291 -- 300},
  year      = {2012},
  abstract  = {Often, detailed simulations of heat conduction in complicated, porous media have large runtimes. Then homogenization is a powerful tool to speed up the calculations by preserving accurate solutions at the same time. Unfortunately real structures are generally non-periodic, which requires unpractical, complicated homogenization techniques. We demonstrate in this paper, that the application of simple, periodic techniques to realistic media, that are just close to periodic, gives accurate, approximative solutions. In order to obtain effective parameters for the homogenized heat equation, we have to solve a so called "cell problem". In contrast to periodic structures it is not trivial to determine a suitable unit cell, which represents a non-periodic media. To overcome this problem, we give a rule of thumb on how to choose a good cell. Finally we demonstrate the efficiency of our method for virtually generated foams as well as real foams and compare these results to periodic structures.},
  language  = {en}
}
@article{YoshinobuMoritzFingeretal.2006,
  author    = {Yoshinobu, Tatsuo and Moritz, Werner and Finger, Friedhelm and Sch{\"o}ning, Michael Josef},
  title     = {Application of thin-film amorphous silicon to chemical imaging},
  series = {Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.},
  journal   = {Nanostructured materials and hybrid composites for gas sensors and biomedical applications : symposium held April 18-20, 2006, San Francisco , California, U.S.A.},
  number    = {Paper 0910-A-20-01},
  editor    = {Comini, Elisabetta},
  isbn      = {9781558998711},
  pages     = {1 -- 10},
  year      = {2006},
  language  = {en}
}
@article{IdingSiegertMeschetal.1998,
  author    = {Iding, Hans and Siegert, Petra and Mesch, K. and Pohl, Martina},
  title     = {Application of α-keto acid decarboxylases in biotransformations},
  series = {Biochimica et biophysica acta (BBA) - Protein structure and molecular enzymology},
  volume    = {Vol. 1385},
  journal   = {Biochimica et biophysica acta (BBA) - Protein structure and molecular enzymology},
  number    = {Iss. 2},
  issn      = {1879-2588 (E-Journal); 0167-4838 (Print)},
  pages     = {307 -- 322},
  year      = {1998},
  language  = {en}
}
@article{SchuetzHummelSchoeningetal.1999,
  author    = {Sch{\"u}tz, S. and Hummel, Hans E. and Sch{\"o}ning, Michael Josef and Schroth, P. and Kordos, P. and L{\"u}th, H. and Zimmermann, S. and Schwarz, A. and Kohl, C.-D. and Koczan, D.},
  title     = {Applications and perspectives of biosensors based on insect olfaction},
  series = {Sensor 99 : proceedings / 9th International Fair and Conference for Sensors, Transducers \& Systems, May 18 - 20, 1999, Exhibition Centre N{\"u}rnberg/Germany},
  journal   = {Sensor 99 : proceedings / 9th International Fair and Conference for Sensors, Transducers \& Systems, May 18 - 20, 1999, Exhibition Centre N{\"u}rnberg/Germany},
  publisher = {AMA Service},
  address   = {Wunstorf},
  pages     = {99 -- 104},
  year      = {1999},
  language  = {en}
}
@article{YoshinobuYasuhitoIwasakietal.2004,
  author    = {Yoshinobu, T. and Yasuhito, U. and Iwasaki, H. and N{\"a}ther, Niko and Sch{\"o}ning, Michael Josef and Koudelka-Hep, M.},
  title     = {Applications of the light-addressable potentiometric sensor to microfluidic devices},
  series = {Digest of technical papers : September 12 - 15, 2004, Rome, Italy, Pontificia Universitas Sancto Thoma Aquinate in Urbe / [conference chairperson: C. Di Natale].},
  journal   = {Digest of technical papers : September 12 - 15, 2004, Rome, Italy, Pontificia Universitas Sancto Thoma Aquinate in Urbe / [conference chairperson: C. Di Natale].},
  address   = {Roma},
  isbn      = {88-7621-282-5},
  pages     = {434 -- 437},
  year      = {2004},
  language  = {en}
}
@article{FassbenderBuehler1999,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {Applying Ada, Java and CORBA for making a command and control information system platform independent},
  series = {Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach \& Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference},
  journal   = {Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach \& Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {1-58113-127-5},
  pages     = {83 -- 88},
  year      = {1999},
  language  = {en}
}
@article{OjovanSteinmetz2022,
  author    = {Ojovan, Michael I. and Steinmetz, Hans-J{\"u}rgen},
  title     = {Approaches to Disposal of Nuclear Waste},
  series = {Energies},
  volume    = {15},
  journal   = {Energies},
  number    = {20},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en15207804},
  pages     = {Artikel 7804},
  year      = {2022},
  abstract  = {We present a concise mini overview on the approaches to the disposal of nuclear waste currently used or deployed. The disposal of nuclear waste is the end point of nuclear waste management (NWM) activities and is the emplacement of waste in an appropriate facility without the intention to retrieve it. The IAEA has developed an internationally accepted classification scheme based on the end points of NWM, which is used as guidance. Retention times needed for safe isolation of waste radionuclides are estimated based on the radiotoxicity of nuclear waste. Disposal facilities usually rely on a multi-barrier defence system to isolate the waste from the biosphere, which comprises the natural geological barrier and the engineered barrier system. Disposal facilities could be of a trench type, vaults, tunnels, shafts, boreholes, or mined repositories. A graded approach relates the depth of the disposal facilities' location with the level of hazard. Disposal practices demonstrate the reliability of nuclear waste disposal with minimal expected impacts on the environment and humans.},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2008,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Approaching a formal soccer theory from behaviour specifications in robotic soccer / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Schiffer, Stefan ; Stolzenburg, Frieder ; Visser, Ubbo ; Wagner, Tho},
  series = {Computers in sport / editors: P Dabnichki},
  journal   = {Computers in sport / editors: P Dabnichki},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-8456-4064-4},
  pages     = {161 -- 185},
  year      = {2008},
  language  = {en}
}
@article{Grotendorst1990,
  author    = {Grotendorst, Johannes},
  title     = {Approximating functions by means of symbolic computation and a general extrapolation method},
  series = {Computer Physics Communications. 59 (1990), H. 2},
  journal   = {Computer Physics Communications. 59 (1990), H. 2},
  isbn      = {0010-4655},
  pages     = {289 -- 301},
  year      = {1990},
  language  = {en}
}
@article{FigueroaMirandaFengShiuetal.2018,
  author    = {Figueroa-Miranda, Gabriela and Feng, Lingyan and Shiu, Simon Chi-Chin and Dirkzwager, Roderick Marshall and Cheung, Yee-Wai and Tanner, Julian Alexander and Sch{\"o}ning, Michael Josef and Offenh{\"a}usser, Andreas and Mayer, Dirk},
  title     = {Aptamer-based electrochemical biosensor for highly sensitive and selective malaria detection with adjustable dynamic response range and reusability},
  series = {Sensor and Actuators B: Chemical},
  volume    = {255},
  journal   = {Sensor and Actuators B: Chemical},
  number    = {P1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2017.07.117},
  pages     = {235 -- 243},
  year      = {2018},
  abstract  = {Malaria infection remains a significant risk for much of the population of tropical and subtropical areas, particularly in developing countries. Therefore, it is of high importance to develop sensitive, accurate and inexpensive malaria diagnosis tests. Here, we present a novel aptamer-based electrochemical biosensor (aptasensor) for malaria detection by impedance spectroscopy, through the specific recognition between a highly discriminatory DNA aptamer and its target Plasmodium falciparum lactate dehydrogenase (PfLDH). Interestingly, due to the isoelectric point (pI) of PfLDH, the aptasensor response showed an adjustable detection range based on the different protein net-charge at variable pH environments. The specific aptamer recognition allows sensitive protein detection with an expanded detection range and a low detection limit, as well as a high specificity for PfLDH compared to analogous proteins. The specific feasibility of the aptasensor is further demonstrated by detection of the target PfLDH in human serum. Furthermore, the aptasensor can be easily regenerated and thus applied for multiple usages. The robustness, sensitivity, and reusability of the presented aptasensor make it a promising candidate for point-of-care diagnostic systems.},
  language  = {en}
}
@article{AlKaidyKuthanHeringetal.2016,
  author    = {Al-Kaidy, Huschyar and Kuthan, Kai and Hering, Thomas and Tippk{\"o}tter, Nils},
  title     = {Aqueous droplets used as enzymatic microreactors and their electromagnetic actuation},
  series = {Journal of Visualized Experiments},
  journal   = {Journal of Visualized Experiments},
  number    = {Issue 126},
  issn      = {1940-087X},
  doi       = {10.3791/54643},
  year      = {2016},
  abstract  = {For the successful implementation of microfluidic reaction systems, such as PCR and electrophoresis, the movement of small liquid volumes is essential. In conventional lab-on-a-chip-platforms, solvents and samples are passed through defined microfluidic channels with complex flow control installations. The droplet actuation platform presented here is a promising alternative. With it, it is possible to move a liquid drop (microreactor) on a planar surface of a reaction platform (lab-in-a-drop). The actuation of microreactors on the hydrophobic surface of the platform is based on the use of magnetic forces acting on the outer shell of the liquid drops which is made of a thin layer of superhydrophobic magnetite particles. The hydrophobic surface of the platform is needed to avoid any contact between the liquid core and the surface to allow a smooth movement of the microreactor. On the platform, one or more microreactors with volumes of 10 µL can be positioned and moved simultaneously. The platform itself consists of a 3 x 3 matrix of electrical double coils which accommodate either neodymium or iron cores. The magnetic field gradients are automatically controlled. By variation of the magnetic field gradients, the microreactors' magnetic hydrophobic shell can be manipulated automatically to move the microreactor or open the shell reversibly. Reactions of substrates and corresponding enzymes can be initiated by merging the microreactors or bringing them into contact with surface immobilized catalysts.},
  language  = {en}
}
@article{SchererSchaedelBruechleetal.1989,
  author    = {Scherer, Ulrich W. and Sch{\"a}del, M. and Br{\"u}chle, W. and J{\"a}ger, E.},
  title     = {ARCA II - A New Apparatus for Fast Repetitive HPLC-Separations / M. Sch{\"a}del, W. Br{\"u}chle, E. J{\"a}ger, E. Schimpf, J.V. Kratz, U.W. Scherer, H.P. Zimmermann},
  series = {Radiochimica Acta. 48 (1989)},
  journal   = {Radiochimica Acta. 48 (1989)},
  isbn      = {0033-8230},
  pages     = {171},
  year      = {1989},
  language  = {en}
}
@article{HillenUnglaubenWirtz2002,
  author    = {Hillen, Walter and Unglauben, F. and Wirtz, G.},
  title     = {Architectures and Modeling of Distributed Image Information Systems. Unglauben, F.; Hillen, W.; Wirtz, G.},
  series = {Proceedings : July 14 - 18, 2002, Orlando, Florida, USA ; [jointly with the 8th International Conference on Information Systems Analysis and Synthesis (ISAS 2002)] / organized by IIIS, International Institute of Informatics and Systemics. Ed. by Nagib Callaos},
  journal   = {Proceedings : July 14 - 18, 2002, Orlando, Florida, USA ; [jointly with the 8th International Conference on Information Systems Analysis and Synthesis (ISAS 2002)] / organized by IIIS, International Institute of Informatics and Systemics. Ed. by Nagib Callaos},
  publisher = {IIIS},
  address   = {Orlando, Fla.},
  isbn      = {9800781501},
  year      = {2002},
  language  = {en}
}
@article{JacobsQuernheim1990,
  author    = {Jacobs, Stephan and Quernheim, Ulrich},
  title     = {ARQ Error Control for Multipoint Satellite Communications / Ulrich Quernheim, Stephan Jacobs},
  series = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay},
  journal   = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay},
  publisher = {Elsevier},
  address   = {New York, N.Y.},
  isbn      = {0444888721},
  pages     = {xi, 505 p : ill},
  year      = {1990},
  language  = {en}
}
@article{FoersterReschEsseraetal.1992,
  author    = {F{\"o}rster, Arnold and Resch, U. and Essera, N. and Raptis, Y. S.},
  title     = {Arsenic passivation of MBE grown GaAs(100): structural and electronic properties of the decapped surfaces / U. Resch ; N. Essera ; Y. S. Raptis ... A. F{\"o}rster ...},
  series = {Surface Science. 269-270 (1992)},
  journal   = {Surface Science. 269-270 (1992)},
  isbn      = {0039-6028},
  pages     = {797 -- 803},
  year      = {1992},
  language  = {en}
}
@article{FoersterSchaeferLondschien1988,
  author    = {F{\"o}rster, Arnold and Sch{\"a}fer, B.-J. and Londschien, M.},
  title     = {Arsenic passivation of MOMBE grown GaAs surfaces / B. -J. Sch{\"a}fer ; A. F{\"o}rster ; M. Londschien ...},
  series = {Surface Science. 204 (1988), H. 3},
  journal   = {Surface Science. 204 (1988), H. 3},
  isbn      = {0039-6028},
  pages     = {485 -- 490},
  year      = {1988},
  language  = {en}
}
@article{SchererHoer1997,
  author    = {Scherer, Ulrich W. and H{\"o}r, G.},
  title     = {Artifacts and Pitfalls in FDG-PET Whole-Body Scans / U.W. Scherer, G. H{\"o}r},
  series = {Radionuclides for Mammary Gland - Current Status and Future Aspects / G. S. Limouris [Hrsg.]},
  journal   = {Radionuclides for Mammary Gland - Current Status and Future Aspects / G. S. Limouris [Hrsg.]},
  publisher = {Mediterra Publishers},
  address   = {Athen},
  isbn      = {960-85227-6-5},
  pages     = {37 -- 42},
  year      = {1997},
  language  = {en}
}
@article{SchoeningTurekHeidenetal.2009,
  author    = {Sch{\"o}ning, Michael Josef and Turek, M. and Heiden, W. and Riesen, A. and Chhabda, T. A. and Schubert, J. and Kr{\"u}ger, P. and Keusgen, M.},
  title     = {Artificial intelligence/fuzzy logic method for analysis of combined signals from heavy metal chemical sensors},
  series = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  journal   = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  publisher = {Elsevier},
  address   = {New York},
  isbn      = {0013-4686},
  pages     = {6082 -- 6088},
  year      = {2009},
  language  = {en}
}
@article{FayyaziSardarThomasetal.2023,
  author    = {Fayyazi, Mojgan and Sardar, Paramjotsingh and Thomas, Sumit Infent and Daghigh, Roonak and Jamali, Ali and Esch, Thomas and Kemper, Hans and Langari, Reza and Khayyam, Hamid},
  title     = {Artificial intelligence/machine learning in energy management systems, control, and optimization of hydrogen fuel cell vehicles},
  volume    = {15},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/su15065249},
  pages     = {38},
  year      = {2023},
  abstract  = {Environmental emissions, global warming, and energy-related concerns have accelerated the advancements in conventional vehicles that primarily use internal combustion engines. Among the existing technologies, hydrogen fuel cell electric vehicles and fuel cell hybrid electric vehicles may have minimal contributions to greenhouse gas emissions and thus are the prime choices for environmental concerns. However, energy management in fuel cell electric vehicles and fuel cell hybrid electric vehicles is a major challenge. Appropriate control strategies should be used for effective energy management in these vehicles. On the other hand, there has been significant progress in artificial intelligence, machine learning, and designing data-driven intelligent controllers. These techniques have found much attention within the community, and state-of-the-art energy management technologies have been developed based on them. This manuscript reviews the application of machine learning and intelligent controllers for prediction, control, energy management, and vehicle to everything (V2X) in hydrogen fuel cell vehicles. The effectiveness of data-driven control and optimization systems are investigated to evolve, classify, and compare, and future trends and directions for sustainability are discussed.},
  language  = {en}
}
@article{ValeroBung2017,
  author    = {Valero, Daniel and Bung, Daniel B.},
  title     = {Artificial Neural Networks and pattern recognition for air-water flow velocity estimation using a single-tip optical fibre probe},
  series = {Journal of Hydro-environment Research},
  volume    = {19},
  journal   = {Journal of Hydro-environment Research},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1570-6443},
  doi       = {10.1016/j.jher.2017.08.004},
  pages     = {150 -- 159},
  year      = {2017},
  language  = {en}
}
@article{HunkerGossmannRamanetal.2021,
  author    = {Hunker, Jan L. and Gossmann, Matthias and Raman, Aravind Hariharan and Linder, Peter},
  title     = {Artificial neural networks in cardiac safety assessment: Classification of chemotherapeutic compound effects on hiPSC-derived cardiomyocyte contractility},
  series = {Journal of Pharmacological and Toxicological Methods},
  volume    = {111},
  journal   = {Journal of Pharmacological and Toxicological Methods},
  number    = {Article number 107044},
  publisher = {Elsevier},
  address   = {New York},
  issn      = {1056-8719},
  doi       = {10.1016/j.vascn.2021.107044},
  year      = {2021},
  language  = {en}
}
@article{Fabo1993,
  author    = {Fabo, Sabine},
  title     = {Arts and media : towards an universal understanding},
  series = {Leonardo},
  volume    = {26(1993)},
  journal   = {Leonardo},
  number    = {4},
  issn      = {0024-094X},
  pages     = {316 -- 319},
  year      = {1993},
  language  = {en}
}
@article{PaulssenKongArciszewskietal.2012,
  author    = {Paulßen, Elisabeth and Kong, Shushu and Arciszewski, Pawel and Wielbalck, Swantje and Abram, Ulrich},
  title     = {Aryl and NHC Compounds of Technetium and Rhenium},
  series = {Journal of the American Chemical Society},
  volume    = {134},
  journal   = {Journal of the American Chemical Society},
  number    = {22},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-5126},
  doi       = {10.1021/ja3033718},
  pages     = {9118 -- 9121},
  year      = {2012},
  abstract  = {Air- and water-stable phenyl complexes with nitridotechnetium(V) cores can be prepared by straightforward procedures. [TcNPh2(PPh3)2] is formed by the reaction of [TcNCl2(PPh3)2] with PhLi. The analogous N-heterocyclic carbene (NHC) compound [TcNPh2(HLPh)2], where HLPh is 1,3,4-triphenyl-1,2,4-triazol-5-ylidene, is available from (NBu4)[TcNCl4] and HLPh or its methoxo-protected form. The latter compound allows the comparison of different Tc-C bonds within one compound. Surprisingly, the Tc chemistry with such NHCs does not resemble that of corresponding Re complexes, where CH activation and orthometalation dominate.},
  language  = {en}
}
@article{SelmerMiechDierksetal.1998,
  author    = {Selmer, Thorsten and Miech, Claudia and Dierks, Thomas and Figura, Kurt von},
  title     = {Arylsulfatase from Klebsiella pneumoniae Carries a Formylglycine Generated from a Serine / Miech, Claudia ; Dierks, Thomas ; Selmer, Thorsten ; Figura, Kurt von ; Schmidt, Bernd},
  series = {Journal of Biological Chemistry. 273 (1998), H. 9},
  journal   = {Journal of Biological Chemistry. 273 (1998), H. 9},
  isbn      = {1083-351X},
  pages     = {4835 -- 4837},
  year      = {1998},
  language  = {en}
}
@article{Stulpe2019,
  author    = {Stulpe, Werner},
  title     = {Aspects of the Quantum-Classical Connection Based on Statistical Maps},
  series = {Foundations of Physics},
  volume    = {49},
  journal   = {Foundations of Physics},
  number    = {6},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/s10701-019-00269-9},
  pages     = {677 -- 692},
  year      = {2019},
  language  = {en}
}
@article{KaemperLehrAbeletal.1995,
  author    = {K{\"a}mper, Klaus-Peter and Lehr, H. and Abel, S. and Ehrfeld, W.},
  title     = {Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; K{\"a}mper, K.-P.; Michel, F.; Th{\"u}rigen, C.},
  series = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  journal   = {Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)},
  publisher = {Fuji Technology Press},
  pages     = {31 -- 31},
  year      = {1995},
  language  = {en}
}
@article{KearneyHerrmannNavaetal.2003,
  author    = {Kearney, D. and Herrmann, Ulf and Nava, P. and Kelly, B. and Mahoney, R. and Pacheco, J. and Cable, R. and Potrovitza, N. and Blake, D. and Price, H.},
  title     = {Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field},
  series = {Journal of Solar Energy Engineering},
  volume    = {125},
  journal   = {Journal of Solar Energy Engineering},
  number    = {2},
  issn      = {1528-8986},
  doi       = {10.1115/1.1565087},
  pages     = {170 -- 176},
  year      = {2003},
  language  = {en}
}
@article{BogoyavlenskiyDigelBerezin1997,
  author    = {Bogoyavlenskiy, A. P. and Digel, Ilya and Berezin, V. E.},
  title     = {Assessment of dot-blot ELISA sensitivity on membrane sorbent using various peroxidase substrates},
  year      = {1997},
  abstract  = {The sensitivity of the peroxidase reaction in dot-blot ELISA significantly depends on the substrate. The highest sensitivity is observed using benzidine and diamine- phenol combinations as the substrates due to the reaction of the coupled oxidation (NADI)},
  subject      = {Enzyme-linked immunosorbent assay},
  language  = {en}
}
@article{AlbrachtArampatzisBaltzopoulos2008,
  author    = {Albracht, Kirsten and Arampatzis, A. and Baltzopoulos, V.},
  title     = {Assessment of muscle volume and physiological cross-sectional area of the human triceps surae muscle in vivo},
  series = {Journal of Biomechanics},
  volume    = {41},
  journal   = {Journal of Biomechanics},
  issn      = {0021-9290},
  doi       = {10.1016/j.jbiomech.2008.04.020},
  pages     = {2211 -- 2218},
  year      = {2008},
  language  = {en}
}
@article{InfantinoPaulssenMostaccietal.2016,
  author    = {Infantino, Angelo and Paulßen, Elisabeth and Mostacci, Domiziano and Schaffer, Paul and Trinczek, Michael and Hoehr, Cornelia},
  title     = {Assessment of the production of medical isotopes using the Monte Carlo code FLUKA: Simulations against experimental measurements},
  series = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms},
  volume    = {366},
  journal   = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9584},
  doi       = {10.1016/j.nimb.2015.10.067},
  pages     = {117 -- 123},
  year      = {2016},
  abstract  = {The Monte Carlo code FLUKA is used to simulate the production of a number of positron emitting radionuclides, ¹⁸F, ¹³N, ⁹⁴Tc, ⁴⁴Sc, ⁶⁸Ga, ⁸⁶Y, ⁸⁹Zr, ⁵²Mn, ⁶¹Cu and ⁵⁵Co, on a small medical cyclotron with a proton beam energy of 13 MeV. Experimental data collected at the TR13 cyclotron at TRIUMF agree within a factor of 0.6 ± 0.4 with the directly simulated data, except for the production of ⁵⁵Co, where the simulation underestimates the experiment by a factor of 3.4 ± 0.4. The experimental data also agree within a factor of 0.8 ± 0.6 with the convolution of simulated proton fluence and cross sections from literature. Overall, this confirms the applicability of FLUKA to simulate radionuclide production at 13 MeV proton beam energy.},
  language  = {en}
}
@article{VahidpourGuthmanArreolaetal.2022,
  author    = {Vahidpour, Farnoosh and Guthman, Eric and Arreola, Julia and Alghazali, Yousef H. M. and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Assessment of Various Process Parameters for Optimized Sterilization Conditions Using a Multi-Sensing Platform},
  series = {Foods},
  volume    = {11},
  journal   = {Foods},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2304-8158},
  doi       = {10.3390/foods11050660},
  pages     = {Artikel 660},
  year      = {2022},
  abstract  = {In this study, an online multi-sensing platform was engineered to simultaneously evaluate various process parameters of food package sterilization using gaseous hydrogen peroxide (H₂O₂). The platform enabled the validation of critical aseptic parameters. In parallel, one series of microbiological count reduction tests was performed using highly resistant spores of B. atrophaeus DSM 675 to act as the reference method for sterility validation. By means of the multi-sensing platform together with microbiological tests, we examined sterilization process parameters to define the most effective conditions with regards to the highest spore kill rate necessary for aseptic packaging. As these parameters are mutually associated, a correlation between different factors was elaborated. The resulting correlation indicated the need for specific conditions regarding the applied H₂O₂ gas temperature, the gas flow and concentration, the relative humidity and the exposure time. Finally, the novel multi-sensing platform together with the mobile electronic readout setup allowed for the online and on-site monitoring of the sterilization process, selecting the best conditions for sterility and, at the same time, reducing the use of the time-consuming and costly microbiological tests that are currently used in the food package industry.},
  language  = {en}
}
@article{SiqueiraBaeckerPoghossianetal.2010,
  author    = {Siqueira, Jos{\´e} R. Jr. and B{\"a}cker, Matthias and Poghossian, Arshak and Zucolotto, Valtencir and Oliveira, Osvaldo N. Jr. and Sch{\"o}ning, Michael Josef},
  title     = {Associating biosensing properties with the morphological structure of multilayers containing carbon nanotubes on field-effect devices},
  series = {Physica status solidi (a). 207 (2010), H. 4},
  journal   = {Physica status solidi (a). 207 (2010), H. 4},
  isbn      = {1862-6300},
  pages     = {781 -- 786},
  year      = {2010},
  language  = {en}
}
@article{BialonskiLehnertz2013,
  author    = {Bialonski, Stephan and Lehnertz, Klaus},
  title     = {Assortative mixing in functional brain networks during epileptic seizures},
  series = {Chaos: An Interdisciplinary Journal of Nonlinear Science},
  volume    = {23},
  journal   = {Chaos: An Interdisciplinary Journal of Nonlinear Science},
  number    = {3},
  doi       = {10.1063/1.4821915},
  pages     = {033139},
  year      = {2013},
  language  = {en}
}
@article{WilsonBlomeLaFave1996,
  author    = {Wilson, Thomas L and Blome, Hans-Joachim and LaFave, Norman},
  title     = {Astrophysical Cosmology Using a Lunar Ligo},
  series = {Engineering, construction, and operations in space V : proceedings of the Fifth International Conference on Space '96, Albuquerque, New Mexico, June 1-6, 1996 / sponsored by Aerospace Division of the American Society of Civil Engineers ... [et al.]; edite},
  journal   = {Engineering, construction, and operations in space V : proceedings of the Fifth International Conference on Space '96, Albuquerque, New Mexico, June 1-6, 1996 / sponsored by Aerospace Division of the American Society of Civil Engineers ... [et al.]; edite},
  publisher = {The Society},
  address   = {New York},
  isbn      = {0-7844-0177-2},
  pages     = {861 -- 863},
  year      = {1996},
  language  = {en}
}
@article{ReugelsBoggettiScheeretal.2006,
  author    = {Reugels, Alexander M. and Boggetti, Barbara and Scheer, Nico and Campos-Ortega, Jos{\´e} A.},
  title     = {Asymmetric localization of Numb:EGFP in dividing neuroepithelial cells during neurulation in Danio rerio},
  series = {Developmental Dynamics},
  volume    = {235},
  journal   = {Developmental Dynamics},
  number    = {4},
  issn      = {1097-0177},
  doi       = {10.1002/dvdy.20699},
  pages     = {934 -- 948},
  year      = {2006},
  language  = {en}
}
@article{Dikta1995,
  author    = {Dikta, Gerhard},
  title     = {Asymptotic Normality Under the Koziol-Green Model},
  series = {Communications in Statistics: Theory and Methods. 24 (1995), H. 6},
  journal   = {Communications in Statistics: Theory and Methods. 24 (1995), H. 6},
  isbn      = {0361-0926},
  pages     = {1537 -- 1549},
  year      = {1995},
  language  = {en}
}
@article{DiktaKuehlheimMendoncaetal.2015,
  author    = {Dikta, Gerhard and K{\"u}hlheim, Ren{\´e} and Mendonca, Jorge and Una-Alcarez, Jacobo de},
  title     = {Asymptotic representation of presmoothed Kaplan-Meier integrals with covariates in a semiparametric censorship model},
  series = {Journal of Statistical Planning and Inference},
  volume    = {Vol. 171},
  journal   = {Journal of Statistical Planning and Inference},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0378-3758},
  doi       = {10.1016/j.jspi.2015.12.001},
  pages     = {10 -- 37},
  year      = {2015},
  language  = {en}
}
@article{Dikta2014,
  author    = {Dikta, Gerhard},
  title     = {Asymptotically efficient estimation under semi-parametric random censorship models},
  series = {Journal of multivariate analysis},
  volume    = {124},
  journal   = {Journal of multivariate analysis},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1095-7243 (E-Journal); 0047-259X (Print)},
  doi       = {10.1016/j.jmva.2013.10.002},
  pages     = {10 -- 24},
  year      = {2014},
  abstract  = {We study the estimation of some linear functionals which are based on an unknown lifetime distribution. The observations are assumed to be generated under the semi-parametric random censorship model (SRCM), that is, a random censorship model where the conditional expectation of the censoring indicator given the observation belongs to a parametric family. Under this setup a semi-parametric estimator of the survival function was introduced by the author. If the parametric model assumption is correct, it is known that the estimated functional which is based on this semi-parametric estimator is asymptotically at least as efficient as the corresponding one which rests on the nonparametric Kaplan-Meier estimator. In this paper we show that the estimated functional which is based on this semi-parametric estimator is asymptotically efficient with respect to the class of all regular estimators under this semi-parametric model.},
  language  = {en}
}
@article{GrotendorstScottAubertFreconetal.2004,
  author    = {Grotendorst, Johannes and Scott, Tony C. and Aubert-Fr{\´e}con, Monique and Hadinger, Gis{\`e}le},
  title     = {Asymptotically exact calculation of the exchange energies of one-active-electron diatomic ions with the surface integral method / Scott, Tony C. ; Aubert-Fr{\´e}con, Monique ; Hadinger, Gis{\`e}le ; Andrae, Dirk ; Grotendorst, Johannes ; Morgan Ill, John D.},
  series = {Journal of Physics B: Atomic, Molecular and Optival Physics. 37 (2004), H. 22},
  journal   = {Journal of Physics B: Atomic, Molecular and Optival Physics. 37 (2004), H. 22},
  isbn      = {0953-4075},
  pages     = {4451 -- 4469},
  year      = {2004},
  language  = {en}
}
@article{HoffmannUhlCeblinetal.2022,
  author    = {Hoffmann, Andreas and Uhl, Matthias and Ceblin, Maximilian and Rohrbach, Felix and Bansmann, Joachim and Mallah, Marcel and Heuermann, Holger and Jacob, Timo and Kuehne, Alexander J.C.},
  title     = {Atmospheric pressure plasma-jet treatment of PAN-nonwovens—carbonization of nanofiber electrodes},
  series = {C - Journal of Carbon Research},
  volume    = {8},
  journal   = {C - Journal of Carbon Research},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2311-5629},
  doi       = {10.3390/c8030033},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {Carbon nanofibers are produced from dielectric polymer precursors such as polyacrylonitrile (PAN). Carbonized nanofiber nonwovens show high surface area and good electrical conductivity, rendering these fiber materials interesting for application as electrodes in batteries, fuel cells, and supercapacitors. However, thermal processing is slow and costly, which is why new processing techniques have been explored for carbon fiber tows. Alternatives for the conversion of PAN-precursors into carbon fiber nonwovens are scarce. Here, we utilize an atmospheric pressure plasma jet to conduct carbonization of stabilized PAN nanofiber nonwovens. We explore the influence of various processing parameters on the conductivity and degree of carbonization of the converted nanofiber material. The precursor fibers are converted by plasma-jet treatment to carbon fiber nonwovens within seconds, by which they develop a rough surface making subsequent surface activation processes obsolete. The resulting carbon nanofiber nonwovens are applied as supercapacitor electrodes and examined by cyclic voltammetry and impedance spectroscopy. Nonwovens that are carbonized within 60 s show capacitances of up to 5 F g⁻¹.},
  language  = {en}
}
@article{HoffmannRohrbachUhletal.2022,
  author    = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.},
  title     = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing},
  series = {Journal of Applied Polymer Science},
  volume    = {139},
  journal   = {Journal of Applied Polymer Science},
  number    = {37},
  publisher = {Wiley},
  issn      = {0021-8995 (Print)},
  doi       = {10.1002/app.52887},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.},
  language  = {en}
}
@article{FoersterRosenauerOberstetal.1999,
  author    = {F{\"o}rster, Arnold and Rosenauer, A. and Oberst, W. and Gerthsen, D.},
  title     = {Atomic scale analysis of the indium distribution in InGaAs/GaAs (001) heterostructures: segregation, lateral indium redistribution and the effect of growth interruptions. Rosenauer, A. ; Oberst, W. ; Gerthsen, D. ; F{\"o}rster, A.},
  series = {Thin Solid Films. 357 (1999)},
  journal   = {Thin Solid Films. 357 (1999)},
  isbn      = {0040-6090},
  pages     = {18 -- 21},
  year      = {1999},
  language  = {en}
}
@article{FoersterRosenauerRemmele1997,
  author    = {F{\"o}rster, Arnold and Rosenauer, A. and Remmele, T.},
  title     = {Atomic scale strain measurements by the digital analysis of transmission electron microscopic lattice images / A. Rosenauer ; T. Remmele ; D. Gerthsen ... A. F{\"o}rster},
  series = {Optik : international journal for light and electron optics. 105 (1997), H. 3},
  journal   = {Optik : international journal for light and electron optics. 105 (1997), H. 3},
  isbn      = {0030-4026},
  pages     = {99 -- 107},
  year      = {1997},
  language  = {en}
}
@article{BeverungenEggertVoigtetal.2013,
  author    = {Beverungen, Daniel and Eggert, Mathias and Voigt, Matthias and Rosemann, Michael},
  title     = {Augmenting Analytical CRM Strategies with Social BI},
  series = {International Journal of Business Intelligence Research (IJBIR)},
  volume    = {4},
  journal   = {International Journal of Business Intelligence Research (IJBIR)},
  number    = {3},
  publisher = {IGI Global},
  address   = {Hershey},
  issn      = {1947-3591},
  doi       = {10.4018/ijbir.2013070103},
  pages     = {32 -- 49},
  year      = {2013},
  language  = {en}
}
@article{Pietsch2015,
  author    = {Pietsch, Wolfram},
  title     = {Augmenting voice of the customer analysis by analysis of belief},
  series = {QFD-Forum},
  journal   = {QFD-Forum},
  number    = {30},
  issn      = {1431-6951},
  pages     = {1 -- 5},
  year      = {2015},
  language  = {en}
}
@article{SchwabedalSippelBrandtetal.2018,
  author    = {Schwabedal, Justus T. C. and Sippel, Daniel and Brandt, Moritz D. and Bialonski, Stephan},
  title     = {Automated Classification of Sleep Stages and EEG Artifacts in Mice with Deep Learning},
  doi       = {10.48550/arXiv.1809.08443},
  year      = {2018},
  abstract  = {Sleep scoring is a necessary and time-consuming task in sleep studies. In animal models (such as mice) or in humans, automating this tedious process promises to facilitate long-term studies and to promote sleep biology as a data-driven f ield. We introduce a deep neural network model that is able to predict different states of consciousness (Wake, Non-REM, REM) in mice from EEG and EMG recordings with excellent scoring results for out-of-sample data. Predictions are made on epochs of 4 seconds length, and epochs are classified as artifactfree or not. The model architecture draws on recent advances in deep learning and in convolutional neural networks research. In contrast to previous approaches towards automated sleep scoring, our model does not rely on manually defined features of the data but learns predictive features automatically. We expect deep learning models like ours to become widely applied in different fields, automating many repetitive cognitive tasks that were previously difficult to tackle.},
  language  = {en}
}
@article{GorzalkaSchmiedtSchorn2021,
  author    = {Gorzalka, Philip and Schmiedt, Jacob Estevam and Schorn, Christian},
  title     = {Automated Generation of an Energy Simulation Model for an Existing Building from UAV Imagery},
  series = {Buildings},
  volume    = {11},
  journal   = {Buildings},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2075-5309},
  doi       = {10.3390/buildings11090380},
  pages     = {15 Seiten},
  year      = {2021},
  abstract  = {An approach to automatically generate a dynamic energy simulation model in Modelica for a single existing building is presented. It aims at collecting data about the status quo in the preparation of energy retrofits with low effort and costs. The proposed method starts from a polygon model of the outer building envelope obtained from photogrammetrically generated point clouds. The open-source tools TEASER and AixLib are used for data enrichment and model generation. A case study was conducted on a single-family house. The resulting model can accurately reproduce the internal air temperatures during synthetical heating up and cooling down. Modelled and measured whole building heat transfer coefficients (HTC) agree within a 12\% range. A sensitivity analysis emphasises the importance of accurate window characterisations and justifies the use of a very simplified interior geometry. Uncertainties arising from the use of archetype U-values are estimated by comparing different typologies, with best- and worst-case estimates showing differences in pre-retrofit heat demand of about ±20\% to the average; however, as the assumptions made are permitted by some national standards, the method is already close to practical applicability and opens up a path to quickly estimate possible financial and energy savings after refurbishment.},
  language  = {en}
}
@article{NeuJanserKhatibietal.2016,
  author    = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.},
  title     = {Automated modal parameter-based anomaly detection under varying wind excitation},
  series = {Structural Health Monitoring},
  volume    = {15},
  journal   = {Structural Health Monitoring},
  number    = {6},
  publisher = {Sage},
  address   = {London},
  issn      = {1475-9217},
  doi       = {10.1177/1475921716665803},
  pages     = {1 -- 20},
  year      = {2016},
  abstract  = {Wind-induced operational variability is one of the major challenges for structural health monitoring of slender engineering structures like aircraft wings or wind turbine blades. Damage sensitive features often show an even bigger sensitivity to operational variability. In this study a composite cantilever was subjected to multiple mass configurations, velocities and angles of attack in a controlled wind tunnel environment. A small-scale impact damage was introduced to the specimen and the structural response measurements were repeated. The proposed damage detection methodology is based on automated operational modal analysis. A novel baseline preparation procedure is described that reduces the amount of user interaction to the provision of a single consistency threshold. The procedure starts with an indeterminate number of operational modal analysis identifications from a large number of datasets and returns a complete baseline matrix of natural frequencies and damping ratios that is suitable for subsequent anomaly detection. Mahalanobis distance-based anomaly detection is then applied to successfully detect the damage under varying severities of operational variability and with various degrees of knowledge about the present operational conditions. The damage detection capabilities of the proposed methodology were found to be excellent under varying velocities and angles of attack. Damage detection was less successful under joint mass and wind variability but could be significantly improved through the provision of the currently encountered operational conditions.},
  language  = {en}
}
@article{GriegerSchwabedalWendeletal.2021,
  author    = {Grieger, Niklas and Schwabedal, Justus T. C. and Wendel, Stefanie and Ritze, Yvonne and Bialonski, Stephan},
  title     = {Automated scoring of pre-REM sleep in mice with deep learning},
  series = {Scientific Reports},
  volume    = {11},
  journal   = {Scientific Reports},
  number    = {Art. 12245},
  publisher = {Springer Nature},
  address   = {London},
  issn      = {2045-2322},
  doi       = {10.1038/s41598-021-91286-0},
  year      = {2021},
  abstract  = {Reliable automation of the labor-intensive manual task of scoring animal sleep can facilitate the analysis of long-term sleep studies. In recent years, deep-learning-based systems, which learn optimal features from the data, increased scoring accuracies for the classical sleep stages of Wake, REM, and Non-REM. Meanwhile, it has been recognized that the statistics of transitional stages such as pre-REM, found between Non-REM and REM, may hold additional insight into the physiology of sleep and are now under vivid investigation. We propose a classification system based on a simple neural network architecture that scores the classical stages as well as pre-REM sleep in mice. When restricted to the classical stages, the optimized network showed state-of-the-art classification performance with an out-of-sample F1 score of 0.95 in male C57BL/6J mice. When unrestricted, the network showed lower F1 scores on pre-REM (0.5) compared to the classical stages. The result is comparable to previous attempts to score transitional stages in other species such as transition sleep in rats or N1 sleep in humans. Nevertheless, we observed that the sequence of predictions including pre-REM typically transitioned from Non-REM to REM reflecting sleep dynamics observed by human scorers. Our findings provide further evidence for the difficulty of scoring transitional sleep stages, likely because such stages of sleep are under-represented in typical data sets or show large inter-scorer variability. We further provide our source code and an online platform to run predictions with our trained network.},
  language  = {en}
}
@article{SchmitzOligschlaegerEifleretal.1994,
  author    = {Schmitz, G{\"u}nter and Oligschl{\"a}ger, U. and Eifler, G. and Lechner, H.},
  title     = {Automated System for Optimized Calibration of Engine Management Systems},
  year      = {1994},
  language  = {en}
}
@article{MarxSchenkBehrensetal.2013,
  author    = {Marx, Ulrich and Schenk, Friedrich and Behrens, Jan and Meyr, Ulrike and Wanek, Paul and Zang, Werner and Schmitt, Robert and Br{\"u}stle, Oliver and Zenke, Martin and Klocke, Fritz},
  title     = {Automatic production of induced pluripotent stem cells},
  series = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  volume    = {Vol. 5},
  journal   = {Procedia CIRP : First CIRP Conference on BioManufacturing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  pages     = {2 -- 6},
  year      = {2013},
  language  = {en}
}
@article{EnningBernhardRake1994,
  author    = {Enning, Manfred and Bernhard, S. and Rake, H.},
  title     = {Automation of a laboratory plant for direct casting of thin steel strips / Bernhard, S. ; Enning, M. ; Rake, H.},
  series = {Control Engineering Practice. 2 (1994), H. 6},
  journal   = {Control Engineering Practice. 2 (1994), H. 6},
  isbn      = {0967-0661},
  pages     = {961 -- 967},
  year      = {1994},
  language  = {en}
}
@article{BiselliVanderPolDeGooijeretal.1996,
  author    = {Biselli, Manfred and Van der Pol, Jens J. and De Gooijer, Cornelis D. and Wandrey, Christian},
  title     = {Automation of selective assays for on-line bioprocess monitoring by flow-injection analysis / van der Pol, Jens J. ; de Gooijer, Cornelis D. ; Biselli, Manfred ; Wandrey, Christian ; Tramper, Johannes},
  series = {Trends in Biotechnology. 14 (1996), H. 12},
  journal   = {Trends in Biotechnology. 14 (1996), H. 12},
  isbn      = {0167-7799},
  pages     = {471 -- 477},
  year      = {1996},
  language  = {en}
}
@article{LaarmannThomaMischetal.2023,
  author    = {Laarmann, Lukas and Thoma, Andreas and Misch, Philipp and R{\"o}th, Thilo and Braun, Carsten and Watkins, Simon and Fard, Mohammad},
  title     = {Automotive safety approach for future eVTOL vehicles},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer Nature},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-023-00655-0},
  pages     = {11 Seiten},
  year      = {2023},
  abstract  = {The eVTOL industry is a rapidly growing mass market expected to start in 2024. eVTOL compete, caused by their predicted missions, with ground-based transportation modes, including mainly passenger cars. Therefore, the automotive and classical aircraft design process is reviewed and compared to highlight advantages for eVTOL development. A special focus is on ergonomic comfort and safety. The need for further investigation of eVTOL's crashworthiness is outlined by, first, specifying the relevance of passive safety via accident statistics and customer perception analysis; second, comparing the current state of regulation and certification; and third, discussing the advantages of integral safety and applying the automotive safety approach for eVTOL development. Integral safety links active and passive safety, while the automotive safety approach means implementing standardized mandatory full-vehicle crash tests for future eVTOL. Subsequently, possible crash impact conditions are analyzed, and three full-vehicle crash load cases are presented.},
  language  = {en}
}
@article{EnningMannBolligetal.2003,
  author    = {Enning, Manfred and Mann, S. and Bollig, A. and Kaierle, S.},
  title     = {Autonomous Production Cell for Laser Beam Welding / Mann S. ; Bollig, A. ; Kaierle, S. ; Abel, D. ; Poprawe, R.},
  publisher = {LIA},
  address   = {Orlando, Fla},
  isbn      = {0912035757},
  year      = {2003},
  language  = {en}
}
@article{Benkner1995,
  author    = {Benkner, Thorsten},
  title     = {Autonomous Slot Assignment Schemes for PRMA++ Third Generation TDMA Systems},
  series = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders},
  journal   = {Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders},
  publisher = {Techn. Univ. Eindhoven, Telecommunications Div.},
  address   = {Eindhoven},
  isbn      = {9061449928},
  pages     = {209 S.},
  year      = {1995},
  language  = {en}
}
@article{HandtkeSchroeterJuergenetal.2014,
  author    = {Handtke, Stefan and Schroeter, Rebecca and J{\"u}rgen, Britta and Methling, Karen and Schl{\"u}ter, Rabea and Albrecht, Dirk and Hijum, Sacha A. F. T. van and Bongaerts, Johannes and Maurer, Karl-Heinz and Lalk, Michael and Schweder, Thomas and Hecker, Michael and Voigt, Birgit},
  title     = {Bacillus pumilus reveals a remarkably high resistance to hydrogen peroxide provoked oxidative stress},
  series = {PLOS one},
  volume    = {9},
  journal   = {PLOS one},
  number    = {1},
  publisher = {PLOS},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0085625},
  pages     = {e85625},
  year      = {2014},
  abstract  = {Bacillus pumilus is characterized by a higher oxidative stress resistance than other comparable industrially relevant Bacilli such as B. subtilis or B. licheniformis. In this study the response of B. pumilus to oxidative stress was investigated during a treatment with high concentrations of hydrogen peroxide at the proteome, transcriptome and metabolome level. Genes/proteins belonging to regulons, which are known to have important functions in the oxidative stress response of other organisms, were found to be upregulated, such as the Fur, Spx, SOS or CtsR regulon. Strikingly, parts of the fundamental PerR regulon responding to peroxide stress in B. subtilis are not encoded in the B. pumilus genome. Thus, B. pumilus misses the catalase KatA, the DNA-protection protein MrgA or the alkyl hydroperoxide reductase AhpCF. Data of this study suggests that the catalase KatX2 takes over the function of the missing KatA in the oxidative stress response of B. pumilus. The genome-wide expression analysis revealed an induction of bacillithiol (Cys-GlcN-malate, BSH) relevant genes. An analysis of the intracellular metabolites detected high intracellular levels of this protective metabolite, which indicates the importance of bacillithiol in the peroxide stress resistance of B. pumilus.},
  language  = {en}
}
@article{ChristenBarteltKowalski2010,
  author    = {Christen, Marc and Bartelt, Perry and Kowalski, Julia},
  title     = {Back calculation of the In den Arelen avalanche with RAMMS: Interpretation of model results},
  series = {Annals of Glaciology},
  volume    = {51},
  journal   = {Annals of Glaciology},
  number    = {54},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  isbn      = {1727-5644},
  doi       = {10.3189/172756410791386553},
  pages     = {161 -- 168},
  year      = {2010},
  abstract  = {Two- and three-dimensional avalanche dynamics models are being increasingly used in hazard-mitigation studies. These models can provide improved and more accurate results for hazard mapping than the simple one-dimensional models presently used in practice. However, two- and three-dimensional models generate an extensive amount of output data, making the interpretation of simulation results more difficult. To perform a simulation in three-dimensional terrain, numerical models require a digital elevation model, specification of avalanche release areas (spatial extent and volume), selection of solution methods, finding an adequate calculation resolution and, finally, the choice of friction parameters. In this paper, the importance and difficulty of correctly setting up and analysing the results of a numerical avalanche dynamics simulation is discussed. We apply the two-dimensional simulation program RAMMS to the 1968 extreme avalanche event In den Arelen. We show the effect of model input variations on simulation results and the dangers and complexities in their interpretation.},
  language  = {en}
}
@article{PogorelovaRogachevDigeletal.2020,
  author    = {Pogorelova, Natalia and Rogachev, Evgeniy and Digel, Ilya and Chernigova, Svetlana and Nardin, Dmitry},
  title     = {Bacterial Cellulose Nanocomposites: Morphology and Mechanical Properties},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {12},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {1996-1944},
  doi       = {10.3390/ma13122849},
  pages     = {1 -- 16},
  year      = {2020},
  abstract  = {Bacterial cellulose (BC) is a promising material for biomedical applications due to its unique properties such as high mechanical strength and biocompatibility. This article describes the microbiological synthesis, modification, and characterization of the obtained BC-nanocomposites originating from symbiotic consortium Medusomyces gisevii. Two BC-modifications have been obtained: BC-Ag and BC-calcium phosphate (BC-Ca3(PO4)2). Structure and physicochemical properties of the BC and its modifications were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), and infrared Fourier spectroscopy as well as by measurements of mechanical and water holding/absorbing capacities. Topographic analysis of the surface revealed multicomponent thick fibrils (150-160 nm in diameter and about 15 µm in length) constituted by 50-60 nm nanofibrils weaved into a left-hand helix. Distinctive features of Ca-phosphate-modified BC samples were (a) the presence of 500-700 nm entanglements and (b) inclusions of Ca3(PO4)2 crystals. The samples impregnated with Ag nanoparticles exhibited numerous roundish inclusions, about 110 nm in diameter. The boundaries between the organic and inorganic phases were very distinct in both cases. The Ag-modified samples also showed a prominent waving pattern in the packing of nanofibrils. The obtained BC gel films possessed water-holding capacity of about 62.35 g/g. However, the dried (to a constant mass) BC-films later exhibited a low water absorption capacity (3.82 g/g). It was found that decellularized BC samples had 2.4 times larger Young's modulus and 2.2 times greater tensile strength as compared to dehydrated native BC films. We presume that this was caused by molecular compaction of the BC structure.},
  language  = {en}
}
@article{DigelAkimbekovRogachevetal.2023,
  author    = {Digel, Ilya and Akimbekov, Nuraly and Rogachev, Evgeniy and Pogorelova, Natalia},
  title     = {Bacterial cellulose produced by Medusomyces gisevii on glucose and sucrose: biosynthesis and structural properties},
  series = {Cellulose},
  journal   = {Cellulose},
  publisher = {Springer Science + Business Media},
  address   = {Dordrecht},
  issn      = {1572-882X (Online)},
  doi       = {10.1007/s10570-023-05592-z},
  pages     = {15 Seiten},
  year      = {2023},
  abstract  = {In this work, the effects of carbon sources and culture media on the production and structural properties of bacterial cellulose (BC) synthesized by Medusomyces gisevii have been studied. The culture medium was composed of different initial concentrations of glucose or sucrose dissolved in 0.4\% extract of plain green tea. Parameters of the culture media (titratable acidity, substrate conversion degree etc.) were monitored daily for 20 days of cultivation. The BC pellicles produced on different carbon sources were characterized in terms of biomass yield, crystallinity and morphology by field emission scanning electron microscopy (FE-SEM), atomic force microscopy and X-ray diffraction. Our results showed that Medusomyces gisevii had higher BC yields in media with sugar concentrations close to 10 g L-1 after a 18-20 days incubation period. Glucose in general lead to a higher BC yield (173 g L-1) compared to sucrose (163.5 g L-1). The BC crystallinity degree and surface roughness were higher in the samples synthetized from sucrose. Obtained FE-SEM micrographs show that the BC pellicles synthesized in the sucrose media contained densely packed tangles of cellulose fibrils whereas the BC produced in the glucose media displayed rather linear geometry of the BC fibrils without noticeable aggregates.},
  language  = {en}
}
@article{DigelTemizArtmannNishikawaetal.2005,
  author    = {Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Nishikawa, K. and Cook, M.},
  title     = {Bactericidal effects of plasma-generated cluster ions},
  series = {Medical and Biological Engineering and Computing. 43 (2005), H. 6},
  journal   = {Medical and Biological Engineering and Computing. 43 (2005), H. 6},
  isbn      = {1741-0444},
  pages     = {800 -- 807},
  year      = {2005},
  language  = {en}
}
@article{MuellerVeggianBochevLiederetal.1982,
  author    = {M{\"u}ller-Veggian, Mattea and Bochev, B. and Lieder, R. M. and Morek, T.},
  title     = {Band crossing and blocking in side bands of ¹⁸⁰,¹⁸² Os},
  series = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1982)},
  journal   = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1982)},
  pages     = {1273},
  year      = {1982},
  language  = {en}
}
@article{FoersterOhlerMoers1997,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Moers, J.},
  title     = {Band offsets at heavily strained III - V interfaces / C. Ohler ; A. F{\"o}rster ; J. Moers...},
  series = {Journal of Physics D: Applied Physics. 30 (1997), H. 10},
  journal   = {Journal of Physics D: Applied Physics. 30 (1997), H. 10},
  isbn      = {0022-3727},
  pages     = {1436 -- 1441},
  year      = {1997},
  language  = {en}
}
@article{MuellerVeggianBeuscherNeskakisetal.1978,
  author    = {M{\"u}ller-Veggian, Mattea and Beuscher, H. and Neskakis, A and Gono, Y.},
  title     = {Band structure in ¹⁹⁰,¹⁹² Au},
  series = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1978)},
  journal   = {Fr{\"u}hjahrstagung ... des Fachausschusses Kernphysik und Hochenergiephysik der DPG (Sektion A: Kernphysik) / Deutsche Physikalische Gesellschaft (1978)},
  publisher = {Physik-Verlag},
  address   = {Weinheim},
  pages     = {796},
  year      = {1978},
  language  = {en}
}
@article{MuellerVeggianBeuscherNeskakisetal.1978,
  author    = {M{\"u}ller-Veggian, Mattea and Beuscher, H. and Neskakis, A and Gono, Y.},
  title     = {Band structure in ¹⁹⁰,¹⁹² Au},
  series = {Annual report 1977 / Institut f{\"u}r Kernphysik Kernforschungsanlage J{\"u}lich},
  journal   = {Annual report 1977 / Institut f{\"u}r Kernphysik Kernforschungsanlage J{\"u}lich},
  publisher = {Verlag des Forschungszentrums J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {46 -- 47},
  year      = {1978},
  language  = {en}
}
@article{MuellerVeggianNeskakisBeuscheretal.1979,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Beuscher, H. and Haenni, D. R.},
  title     = {Band structure in ¹⁹⁴ Au},
  series = {Annual report 1978 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Hrsg.: A. F{\"a}ssler. - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 36)},
  journal   = {Annual report 1978 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Hrsg.: A. F{\"a}ssler. - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 36)},
  publisher = {Kernforschungsanlage},
  address   = {J{\"u}lich},
  pages     = {36},
  year      = {1979},
  language  = {en}
}
@article{FoersterOhlerDaniels1997,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Daniels, C.},
  title     = {Barrier height at clean Au/InAs(100) interfaces / C. Ohler ; C. Daniels ; A. F{\"o}rster ...},
  series = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 15 (1997), H. 3},
  journal   = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 15 (1997), H. 3},
  isbn      = {0169-4332},
  pages     = {702 -- 706},
  year      = {1997},
  language  = {en}
}
@article{Zastrow1985,
  author    = {Zastrow, Udo},
  title     = {Basic geometrical singularities in plane-elasticity and plate-bending problems},
  series = {International Journal of Solids and Structures. 21 (1985), H. 10},
  journal   = {International Journal of Solids and Structures. 21 (1985), H. 10},
  isbn      = {0020-7683},
  pages     = {1047 -- 1067},
  year      = {1985},
  language  = {en}
}
@article{KesslerBalcGebhardtetal.2015,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas and Abbas, Karim},
  title     = {Basic Research on Lattice Structures Focused on the Tensile Strength},
  series = {Applied Mechanics and Materials},
  volume    = {Vol. 808},
  journal   = {Applied Mechanics and Materials},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  issn      = {1662-7482},
  doi       = {10.4028/www.scientific.net/AMM.808.193},
  pages     = {193 -- 198},
  year      = {2015},
  language  = {en}
}